Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus-1

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6: (9356 commits)
  [media] rc: update for bitop name changes
  fs: simplify iget & friends
  fs: pull inode->i_lock up out of writeback_single_inode
  fs: rename inode_lock to inode_hash_lock
  fs: move i_wb_list out from under inode_lock
  fs: move i_sb_list out from under inode_lock
  fs: remove inode_lock from iput_final and prune_icache
  fs: Lock the inode LRU list separately
  fs: factor inode disposal
  fs: protect inode->i_state with inode->i_lock
  lib, arch: add filter argument to show_mem and fix private implementations
  SLUB: Write to per cpu data when allocating it
  slub: Fix debugobjects with lockless fastpath
  autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd()
  autofs4 - remove autofs4_lock
  autofs4 - fix d_manage() return on rcu-walk
  autofs4 - fix autofs4_expire_indirect() traversal
  autofs4 - fix dentry leak in autofs4_expire_direct()
  autofs4 - reinstate last used update on access
  vfs - check non-mountpoint dentry might block in __follow_mount_rcu()
  ...

NOTE!

This merge commit was created to fix compilation error. The block
tree was merged upstream and removed the 'elv_queue_empty()'
function which the new 'mtdswap' driver is using. So a simple
merge of the mtd tree with upstream does not compile. And the
mtd tree has already be published, so re-basing it is not an option.

To fix this unfortunate situation, I had to merge upstream into the
mtd-2.6.git tree without committing, put the fixup patch on top of
this, and then commit this. The result is that we do not have commits
which do not compile.

In other words, this merge commit "merges" 3 things: the MTD tree, the
upstream tree, and the fixup patch.

26 files changed, 1284 insertions, 348 deletions

diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 0717f887cba0..340809a7d233 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -94,6 +94,7 @@ config MACH_MX31_3DS
 	select MXC_DEBUG_BOARD
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_EHCI
@@ -183,6 +184,7 @@ config MACH_MX35_3DS
 	select MXC_DEBUG_BOARD
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
@@ -199,6 +201,15 @@ config MACH_KZM_ARM11_01
 	  Include support for KZM-ARM11-01. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_BUG
+	bool "Support Buglabs BUGBase platform"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	default y
+	help
+	  Include support for BUGBase 1.3 platform. This includes specific
+	  configurations for the board and its peripherals.
+
 config MACH_EUKREA_CPUIMX35
 	bool "Support Eukrea CPUIMX35 Platform"
 	select SOC_IMX35
@@ -229,4 +240,18 @@ config MACH_EUKREA_MBIMXSD35_BASEBOARD
 
 endchoice
 
+config MACH_VPR200
+	bool "Support VPR200 platform"
+	select SOC_IMX35
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	help
+	  Include support for VPR200 platform. This includes specific
+	  configurations for the board and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 8db13294ad27..a54faf2cf5fa 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -5,8 +5,8 @@
 # Object file lists.
 
 obj-y				:= mm.o devices.o cpu.o
-obj-$(CONFIG_SOC_IMX31)		+= clock-imx31.o iomux-imx31.o
-obj-$(CONFIG_SOC_IMX35)		+= clock-imx35.o
+obj-$(CONFIG_SOC_IMX31)		+= clock-imx31.o iomux-imx31.o ehci-imx31.o
+obj-$(CONFIG_SOC_IMX35)		+= clock-imx35.o ehci-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mach-mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)	+= mach-mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mach-mx31lite.o mx31lite-db.o
@@ -20,5 +20,7 @@ obj-$(CONFIG_MACH_PCM043)	+= mach-pcm043.o
 obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
 obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35_3ds.o
 obj-$(CONFIG_MACH_KZM_ARM11_01)	+= mach-kzm_arm11_01.o
+obj-$(CONFIG_MACH_BUG)		+= mach-bug.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX35)	+= mach-cpuimx35.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
+obj-$(CONFIG_MACH_VPR200)	+= mach-vpr200.o
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h
index 677b18aa7ae6..d545d86cc202 100644
--- a/arch/arm/mach-mx3/devices-imx35.h
+++ b/arch/arm/mach-mx3/devices-imx35.h
@@ -35,7 +35,7 @@ extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst;
 #define imx35_add_imx_i2c2(pdata)	imx35_add_imx_i2c(2, pdata)
 
 extern const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst;
-#define imx31_add_imx_keypad(pdata)	\
+#define imx35_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx35_imx_keypad_data, pdata)
 
 extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst;
diff --git a/arch/arm/mach-mx3/ehci-imx31.c b/arch/arm/mach-mx3/ehci-imx31.c
new file mode 100644
index 000000000000..314a983ac614
--- /dev/null
+++ b/arch/arm/mach-mx3/ehci-imx31.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX31_OTG_SIC_SHIFT	29
+#define MX31_OTG_SIC_MASK	(0x3 << MX31_OTG_SIC_SHIFT)
+#define MX31_OTG_PM_BIT		(1 << 24)
+
+#define MX31_H2_SIC_SHIFT	21
+#define MX31_H2_SIC_MASK	(0x3 << MX31_H2_SIC_SHIFT)
+#define MX31_H2_PM_BIT		(1 << 16)
+#define MX31_H2_DT_BIT		(1 << 5)
+
+#define MX31_H1_SIC_SHIFT	13
+#define MX31_H1_SIC_MASK	(0x3 << MX31_H1_SIC_SHIFT)
+#define MX31_H1_PM_BIT		(1 << 8)
+#define MX31_H1_DT_BIT		(1 << 4)
+
+int mx31_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	switch (port) {
+	case 0:	/* OTG port */
+		v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX31_OTG_PM_BIT;
+
+		break;
+	case 1: /* H1 port */
+		v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX31_H1_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX31_H1_DT_BIT;
+
+		break;
+	case 2:	/* H2 port */
+		v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX31_H2_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX31_H2_DT_BIT;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-mx3/ehci-imx35.c b/arch/arm/mach-mx3/ehci-imx35.c
new file mode 100644
index 000000000000..33983a478c6b
--- /dev/null
+++ b/arch/arm/mach-mx3/ehci-imx35.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX35_OTG_SIC_SHIFT	29
+#define MX35_OTG_SIC_MASK	(0x3 << MX35_OTG_SIC_SHIFT)
+#define MX35_OTG_PM_BIT		(1 << 24)
+
+#define MX35_H1_SIC_SHIFT	21
+#define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
+#define MX35_H1_PM_BIT		(1 << 8)
+#define MX35_H1_IPPUE_UP_BIT	(1 << 7)
+#define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
+#define MX35_H1_TLL_BIT		(1 << 5)
+#define MX35_H1_USBTE_BIT	(1 << 4)
+
+int mx35_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	switch (port) {
+	case 0:	/* OTG port */
+		v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX35_OTG_PM_BIT;
+
+		break;
+	case 1: /* H1 port */
+		v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
+			MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX35_H1_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX35_H1_TLL_BIT;
+
+		if (flags & MXC_EHCI_INTERNAL_PHY)
+			v |= MX35_H1_USBTE_BIT;
+
+		if (flags & MXC_EHCI_IPPUE_DOWN)
+			v |= MX35_H1_IPPUE_DOWN_BIT;
+
+		if (flags & MXC_EHCI_IPPUE_UP)
+			v |= MX35_H1_IPPUE_UP_BIT;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 14a5ffc939ad..80761474c0f8 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -165,8 +165,8 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 };
 
-#define GPIO_LED1	(2 * 32 + 29)
-#define GPIO_SWITCH1	(2 * 32 + 25)
+#define GPIO_LED1	IMX_GPIO_NR(3, 29)
+#define GPIO_SWITCH1	IMX_GPIO_NR(3, 25)
 #define GPIO_LCDPWR	(4)
 
 static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
diff --git a/arch/arm/mach-mx3/iomux-imx31.c b/arch/arm/mach-mx3/iomux-imx31.c
index a1d7fa5123dc..cf8f8099ebd7 100644
--- a/arch/arm/mach-mx3/iomux-imx31.c
+++ b/arch/arm/mach-mx3/iomux-imx31.c
@@ -97,7 +97,7 @@ EXPORT_SYMBOL(mxc_iomux_set_pad);
  * 	- reserves the pin so that it is not claimed by another driver
  * 	- setups the iomux according to the configuration
  */
-int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
+int mxc_iomux_alloc_pin(unsigned int pin, const char *label)
 {
 	unsigned pad = pin & IOMUX_PADNUM_MASK;
 
@@ -118,10 +118,10 @@ int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
 }
 EXPORT_SYMBOL(mxc_iomux_alloc_pin);
 
-int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
 		const char *label)
 {
-	unsigned int *p = pin_list;
+	const unsigned int *p = pin_list;
 	int i;
 	int ret = -EINVAL;
 
@@ -139,7 +139,7 @@ setup_error:
 }
 EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
 
-void mxc_iomux_release_pin(const unsigned int pin)
+void mxc_iomux_release_pin(unsigned int pin)
 {
 	unsigned pad = pin & IOMUX_PADNUM_MASK;
 
@@ -148,9 +148,9 @@ void mxc_iomux_release_pin(const unsigned int pin)
 }
 EXPORT_SYMBOL(mxc_iomux_release_pin);
 
-void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
 {
-	unsigned int *p = pin_list;
+	const unsigned int *p = pin_list;
 	int i;
 
 	for (i = 0; i < count; i++) {
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 28b6f414b5d5..226829bf7c25 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -133,7 +133,6 @@ static int armadillo5x0_pins[] = {
 };
 
 /* USB */
-#if defined(CONFIG_USB_ULPI)
 
 #define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
 #define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
@@ -176,8 +175,10 @@ static int usbotg_init(struct platform_device *pdev)
 	gpio_set_value(OTG_RESET, 0/*LOW*/);
 	mdelay(5);
 	gpio_set_value(OTG_RESET, 1/*HIGH*/);
+	mdelay(10);
 
-	return 0;
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_DIFF_UNI);
 
 otg_free_reset:
 	gpio_free(OTG_RESET);
@@ -233,8 +234,10 @@ static int usbh2_init(struct platform_device *pdev)
 	gpio_set_value(USBH2_RESET, 0/*LOW*/);
 	mdelay(5);
 	gpio_set_value(USBH2_RESET, 1/*HIGH*/);
+	mdelay(10);
 
-	return 0;
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_DIFF_UNI);
 
 h2_free_reset:
 	gpio_free(USBH2_RESET);
@@ -246,15 +249,12 @@ h2_free_cs:
 static struct mxc_usbh_platform_data usbotg_pdata __initdata = {
 	.init	= usbotg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init	= usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
 };
-#endif /* CONFIG_USB_ULPI */
 
 /* RTC over I2C*/
 #define ARMADILLO5X0_RTC_GPIO	IOMUX_TO_GPIO(MX31_PIN_SRXD4)
@@ -547,15 +547,15 @@ static void __init armadillo5x0_init(void)
 	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
 
 	/* USB */
-#if defined(CONFIG_USB_ULPI)
-	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
-	imx31_add_mxc_ehci_otg(&usbotg_pdata);
-	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
+
+	usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbotg_pdata.otg)
+		imx31_add_mxc_ehci_otg(&usbotg_pdata);
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 }
 
 static void __init armadillo5x0_timer_init(void)
@@ -569,9 +569,10 @@ static struct sys_timer armadillo5x0_timer = {
 
 MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	/* Maintainer: Alberto Panizzo  */
-	.boot_params	= MX3x_PHYS_OFFSET + 0x100,
-	.map_io		= mx31_map_io,
-	.init_irq	= mx31_init_irq,
-	.timer		= &armadillo5x0_timer,
-	.init_machine	= armadillo5x0_init,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &armadillo5x0_timer,
+	.init_machine = armadillo5x0_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-bug.c b/arch/arm/mach-mx3/mach-bug.c
new file mode 100644
index 000000000000..d137d7078ee9
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-bug.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <mach/iomux-mx3.h>
+#include <mach/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#include <asm/mach/time.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include "devices-imx31.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const unsigned int bug_pins[] __initconst = {
+	MX31_PIN_PC_RST__CTS5,
+	MX31_PIN_PC_VS2__RTS5,
+	MX31_PIN_PC_BVD2__TXD5,
+	MX31_PIN_PC_BVD1__RXD5,
+};
+
+static void __init bug_board_init(void)
+{
+	mxc_iomux_setup_multiple_pins(bug_pins,
+				      ARRAY_SIZE(bug_pins), "uart-4");
+	imx31_add_imx_uart4(&uart_pdata);
+}
+
+static void __init bug_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer bug_timer = {
+	.init = bug_timer_init,
+};
+
+MACHINE_START(BUG, "BugLabs BUGBase")
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &bug_timer,
+	.init_machine = bug_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 26ae90f02582..ec63d998f647 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -60,7 +60,7 @@ static struct tsc2007_platform_data tsc2007_info = {
 	.x_plate_ohms		= 180,
 };
 
-#define TSC2007_IRQGPIO		(2 * 32 + 2)
+#define TSC2007_IRQGPIO		IMX_GPIO_NR(3, 2)
 static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("pcf8563", 0x51),
@@ -111,15 +111,25 @@ static const struct mxc_nand_platform_data
 	.flash_bbt	= 1,
 };
 
+static int eukrea_cpuimx35_otg_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static const struct mxc_usbh_platform_data otg_pdata __initconst = {
+	.init	= eukrea_cpuimx35_otg_init,
 	.portsc	= MXC_EHCI_MODE_UTMI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
+static int eukrea_cpuimx35_usbh1_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
+}
+
 static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
+	.init	= eukrea_cpuimx35_usbh1_init,
 	.portsc	= MXC_EHCI_MODE_SERIAL,
-	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
-		  MXC_EHCI_IPPUE_DOWN,
 };
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
@@ -146,7 +156,7 @@ __setup("otg_mode=", eukrea_cpuimx35_otg_mode);
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init eukrea_cpuimx35_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
 			ARRAY_SIZE(eukrea_cpuimx35_pads));
@@ -184,9 +194,10 @@ struct sys_timer eukrea_cpuimx35_timer = {
 
 MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35")
 	/* Maintainer: Eukrea Electromatique */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx35_map_io,
-	.init_irq       = mx35_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &eukrea_cpuimx35_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx35_map_io,
+	.init_early = imx35_init_early,
+	.init_irq = mx35_init_irq,
+	.timer = &eukrea_cpuimx35_timer,
+	.init_machine = eukrea_cpuimx35_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
index a5f3eb24e4d5..d35621d62b4d 100644
--- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -27,6 +27,7 @@
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
+#include <asm/memory.h>
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
@@ -36,7 +37,6 @@
 #include <mach/clock.h>
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
-#include <mach/memory.h>
 
 #include "devices-imx31.h"
 #include "devices.h"
@@ -266,17 +266,14 @@ static void __init kzm_timer_init(void)
 }
 
 static struct sys_timer kzm_timer = {
-	.init   = kzm_timer_init,
+	.init = kzm_timer_init,
 };
 
-/*
- * The following uses standard kernel macros define in arch.h in order to
- * initialize __mach_desc_KZM_ARM11_01 data structure.
- */
 MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = kzm_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = kzm_board_init,
-	.timer          = &kzm_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = kzm_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &kzm_timer,
+	.init_machine = kzm_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 0d65db885be7..034be624d35c 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -21,9 +21,13 @@
 #include <linux/platform_device.h>
 #include <linux/mfd/mc13783.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/l4f00242t03.h>
 #include <linux/regulator/machine.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
+#include <linux/memblock.h>
+
+#include <media/soc_camera.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -35,6 +39,10 @@
 #include <mach/iomux-mx3.h>
 #include <mach/3ds_debugboard.h>
 #include <mach/ulpi.h>
+#include <mach/mmc.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+#include <mach/mx3_camera.h>
 
 #include "devices-imx31.h"
 #include "devices.h"
@@ -42,10 +50,6 @@
 /* CPLD IRQ line for external uart, external ethernet etc */
 #define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
 
-/*
- * This file contains the board-specific initialization routines.
- */
-
 static int mx31_3ds_pins[] = {
 	/* UART1 */
 	MX31_PIN_CTS1__CTS1,
@@ -53,6 +57,12 @@ static int mx31_3ds_pins[] = {
 	MX31_PIN_TXD1__TXD1,
 	MX31_PIN_RXD1__RXD1,
 	IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+	/*SPI0*/
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS2__SS2, /* CS for LCD */
 	/* SPI 1 */
 	MX31_PIN_CSPI2_SCLK__SCLK,
 	MX31_PIN_CSPI2_MOSI__MOSI,
@@ -100,6 +110,252 @@ static int mx31_3ds_pins[] = {
 	IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1),
 	/* USB Host2 reset */
 	IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO),
+	/* I2C1 */
+	MX31_PIN_I2C_CLK__I2C1_SCL,
+	MX31_PIN_I2C_DAT__I2C1_SDA,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */
+	MX31_PIN_GPIO3_0__GPIO3_0, /* OE */
+	/* Framebuffer */
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_CONTRAST__CONTRAST,
+	/* CSI */
+	MX31_PIN_CSI_D6__CSI_D6,
+	MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8,
+	MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10,
+	MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12,
+	MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14,
+	MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
+	MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
+	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	MX31_PIN_CSI_D5__GPIO3_5, /* CMOS PWDN */
+	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_GPIO), /* CMOS reset */
+};
+
+/*
+ * Camera support
+ */
+static phys_addr_t mx3_camera_base __initdata;
+#define MX31_3DS_CAMERA_BUF_SIZE SZ_8M
+
+#define MX31_3DS_GPIO_CAMERA_PW IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
+#define MX31_3DS_GPIO_CAMERA_RST IOMUX_TO_GPIO(MX31_PIN_RI_DTE1)
+
+static struct gpio mx31_3ds_camera_gpios[] = {
+	{ MX31_3DS_GPIO_CAMERA_PW, GPIOF_OUT_INIT_HIGH, "camera-power" },
+	{ MX31_3DS_GPIO_CAMERA_RST, GPIOF_OUT_INIT_HIGH, "camera-reset" },
+};
+
+static int __init mx31_3ds_camera_alloc_dma(void)
+{
+	int dma;
+
+	if (!mx3_camera_base)
+		return -ENOMEM;
+
+	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+					mx3_camera_base, mx3_camera_base,
+					MX31_3DS_CAMERA_BUF_SIZE,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+	if (!(dma & DMA_MEMORY_MAP))
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int mx31_3ds_camera_power(struct device *dev, int on)
+{
+	/* enable or disable the camera */
+	pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
+	gpio_set_value(MX31_3DS_GPIO_CAMERA_PW, on ? 0 : 1);
+
+	if (!on)
+		goto out;
+
+	/* If enabled, give a reset impulse */
+	gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 0);
+	msleep(20);
+	gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 1);
+	msleep(100);
+
+out:
+	return 0;
+}
+
+static struct i2c_board_info mx31_3ds_i2c_camera = {
+	I2C_BOARD_INFO("ov2640", 0x30),
+};
+
+static struct regulator_bulk_data mx31_3ds_camera_regs[] = {
+	{ .supply = "cmos_vcore" },
+	{ .supply = "cmos_2v8" },
+};
+
+static struct soc_camera_link iclink_ov2640 = {
+	.bus_id		= 0,
+	.board_info	= &mx31_3ds_i2c_camera,
+	.i2c_adapter_id	= 0,
+	.power		= mx31_3ds_camera_power,
+	.regulators	= mx31_3ds_camera_regs,
+	.num_regulators	= ARRAY_SIZE(mx31_3ds_camera_regs),
+};
+
+static struct platform_device mx31_3ds_ov2640 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &iclink_ov2640,
+	},
+};
+
+struct mx3_camera_pdata mx31_3ds_camera_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.flags		= MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 2600,
+};
+
+/*
+ * FB support
+ */
+static const struct fb_videomode fb_modedb[] = {
+	{	/* 480x640 @ 60 Hz */
+		.name		= "Epson-VGA",
+		.refresh	= 60,
+		.xres		= 480,
+		.yres		= 640,
+		.pixclock	= 41701,
+		.left_margin	= 20,
+		.right_margin	= 41,
+		.upper_margin	= 10,
+		.lower_margin	= 5,
+		.hsync_len	= 20,
+		.vsync_len	= 10,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "Epson-VGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+/* LCD */
+static struct l4f00242t03_pdata mx31_3ds_l4f00242t03_pdata = {
+	.reset_gpio		= IOMUX_TO_GPIO(MX31_PIN_LCS1),
+	.data_enable_gpio	= IOMUX_TO_GPIO(MX31_PIN_SER_RS),
+	.core_supply		= "lcd_2v8",
+	.io_supply		= "vdd_lcdio",
+};
+
+/*
+ * Support for SD card slot in personality board
+ */
+#define MX31_3DS_GPIO_SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define MX31_3DS_GPIO_SDHC1_BE IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+
+static struct gpio mx31_3ds_sdhc1_gpios[] = {
+	{ MX31_3DS_GPIO_SDHC1_CD, GPIOF_IN, "sdhc1-card-detect" },
+	{ MX31_3DS_GPIO_SDHC1_BE, GPIOF_OUT_INIT_LOW, "sdhc1-bus-en" },
+};
+
+static int mx31_3ds_sdhc1_init(struct device *dev,
+			       irq_handler_t detect_irq,
+			       void *data)
+{
+	int ret;
+
+	ret = gpio_request_array(mx31_3ds_sdhc1_gpios,
+				 ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
+	if (ret) {
+		pr_warning("Unable to request the SD/MMC GPIOs.\n");
+		return ret;
+	}
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+			  detect_irq, IRQF_DISABLED |
+			  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			  "sdhc1-detect", data);
+	if (ret) {
+		pr_warning("Unable to request the SD/MMC card-detect IRQ.\n");
+		goto gpio_free;
+	}
+
+	return 0;
+
+gpio_free:
+	gpio_free_array(mx31_3ds_sdhc1_gpios,
+			ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
+	return ret;
+}
+
+static void mx31_3ds_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), data);
+	gpio_free_array(mx31_3ds_sdhc1_gpios,
+			 ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
+}
+
+static void mx31_3ds_sdhc1_setpower(struct device *dev, unsigned int vdd)
+{
+	/*
+	 * While the voltage stuff is done by the driver, activate the
+	 * Buffer Enable Pin only if there is a card in slot to fix the card
+	 * voltage issue caused by bi-directional chip TXB0108 on 3Stack.
+	 * Done here because at this stage we have for sure a debounced value
+	 * of the presence of the card, showed by the value of vdd.
+	 * 7 == ilog2(MMC_VDD_165_195)
+	 */
+	if (vdd > 7)
+		gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 1);
+	else
+		gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 0);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init		= mx31_3ds_sdhc1_init,
+	.exit		= mx31_3ds_sdhc1_exit,
+	.setpower	= mx31_3ds_sdhc1_setpower,
 };
 
 /*
@@ -138,7 +394,71 @@ static struct regulator_init_data gpo_init = {
 	}
 };
 
-static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
+static struct regulator_consumer_supply vmmc2_consumers[] = {
+	REGULATOR_SUPPLY("vmmc", "mxc-mmc.0"),
+};
+
+static struct regulator_init_data vmmc2_init = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vmmc2_consumers),
+	.consumer_supplies = vmmc2_consumers,
+};
+
+static struct regulator_consumer_supply vmmc1_consumers[] = {
+	REGULATOR_SUPPLY("lcd_2v8", NULL),
+	REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"),
+};
+
+static struct regulator_init_data vmmc1_init = {
+	.constraints = {
+		.min_uV = 2800000,
+		.max_uV = 2800000,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
+	.consumer_supplies = vmmc1_consumers,
+};
+
+static struct regulator_consumer_supply vgen_consumers[] = {
+	REGULATOR_SUPPLY("vdd_lcdio", NULL),
+};
+
+static struct regulator_init_data vgen_init = {
+	.constraints = {
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
+	.consumer_supplies = vgen_consumers,
+};
+
+static struct regulator_consumer_supply vvib_consumers[] = {
+	REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"),
+};
+
+static struct regulator_init_data vvib_init = {
+	.constraints = {
+		.min_uV = 1300000,
+		.max_uV = 1300000,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vvib_consumers),
+	.consumer_supplies = vvib_consumers,
+};
+
+static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
 	{
 		.id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */
 		.init_data = &pwgtx_init,
@@ -152,17 +472,40 @@ static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
 	}, {
 		.id = MC13783_REG_GPO3, /* Turn on 3.3V */
 		.init_data = &gpo_init,
+	}, {
+		.id = MC13783_REG_VMMC2, /* Power MMC/SD, WiFi/Bluetooth. */
+		.init_data = &vmmc2_init,
+	}, {
+		.id = MC13783_REG_VMMC1, /* Power LCD, CMOS, FM, GPS, Accel. */
+		.init_data = &vmmc1_init,
+	}, {
+		.id = MC13783_REG_VGEN,  /* Power LCD */
+		.init_data = &vgen_init,
+	}, {
+		.id = MC13783_REG_VVIB,  /* Power CMOS */
+		.init_data = &vvib_init,
 	},
 };
 
 /* MC13783 */
-static struct mc13783_platform_data mc13783_pdata __initdata = {
-	.regulators = mx31_3ds_regulators,
-	.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
+static struct mc13xxx_platform_data mc13783_pdata = {
+	.regulators = {
+		.regulators = mx31_3ds_regulators,
+		.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
+	},
 	.flags  = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN,
 };
 
 /* SPI */
+static int spi0_internal_chipselect[] = {
+	MXC_SPI_CS(2),
+};
+
+static const struct spi_imx_master spi0_pdata __initconst = {
+	.chipselect	= spi0_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi0_internal_chipselect),
+};
+
 static int spi1_internal_chipselect[] = {
 	MXC_SPI_CS(0),
 	MXC_SPI_CS(2),
@@ -182,6 +525,12 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
 		.platform_data	= &mc13783_pdata,
 		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
 		.mode = SPI_CS_HIGH,
+	}, {
+		.modalias	= "l4f00242t03",
+		.max_speed_hz	= 5000000,
+		.bus_num	= 0,
+		.chip_select	= 0, /* SS2 */
+		.platform_data	= &mx31_3ds_l4f00242t03_pdata,
 	},
 };
 
@@ -245,6 +594,11 @@ usbotg_free_reset:
 	return err;
 }
 
+static int mx31_3ds_otg_init(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
+
 static int mx31_3ds_host2_init(struct platform_device *pdev)
 {
 	int err;
@@ -276,25 +630,25 @@ static int mx31_3ds_host2_init(struct platform_device *pdev)
 
 	mdelay(1);
 	gpio_set_value(USBH2_RST_B, 1);
-	return 0;
+
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
 
 usbotg_free_reset:
 	gpio_free(USBH2_RST_B);
 	return err;
 }
 
-#if defined(CONFIG_USB_ULPI)
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= mx31_3ds_otg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init = mx31_3ds_host2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
-#endif
 
 static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -320,19 +674,18 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-/*
- * Set up static virtual mappings.
- */
-static void __init mx31_3ds_map_io(void)
-{
-	mx31_map_io();
-}
+static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = {
+	.bitrate = 100000,
+};
 
-/*!
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
+static struct platform_device *devices[] __initdata = {
+	&mx31_3ds_ov2640,
+};
+
+static void __init mx31_3ds_init(void)
 {
+	int ret;
+
 	mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
 				      "mx31_3ds");
 
@@ -343,20 +696,22 @@ static void __init mxc_board_init(void)
 	spi_register_board_info(mx31_3ds_spi_devs,
 						ARRAY_SIZE(mx31_3ds_spi_devs));
 
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
 	imx31_add_imx_keypad(&mx31_3ds_keymap_data);
 
 	mx31_3ds_usbotg_init();
-#if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
-		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
-		imx31_add_mxc_ehci_otg(&otg_pdata);
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
+		if (otg_pdata.otg)
+			imx31_add_mxc_ehci_otg(&otg_pdata);
 	}
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+
 	if (!otg_mode_host)
 		imx31_add_fsl_usb2_udc(&usbotg_pdata);
 
@@ -364,6 +719,26 @@ static void __init mxc_board_init(void)
 		printk(KERN_WARNING "Init of the debug board failed, all "
 				    "devices on the debug board are unusable.\n");
 	imx31_add_imx2_wdt(NULL);
+	imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
+	imx31_add_mxc_mmc(0, &sdhc1_pdata);
+
+	imx31_add_spi_imx0(&spi0_pdata);
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+	/* CSI */
+	/* Camera power: default - off */
+	ret = gpio_request_array(mx31_3ds_camera_gpios,
+				 ARRAY_SIZE(mx31_3ds_camera_gpios));
+	if (ret) {
+		pr_err("Failed to request camera gpios");
+		iclink_ov2640.power = NULL;
+	}
+
+	if (!mx31_3ds_camera_alloc_dma())
+		mxc_register_device(&mx3_camera, &mx31_3ds_camera_pdata);
+	else
+		pr_err("Failed to allocate dma memory for camera");
 }
 
 static void __init mx31_3ds_timer_init(void)
@@ -375,15 +750,22 @@ static struct sys_timer mx31_3ds_timer = {
 	.init	= mx31_3ds_timer_init,
 };
 
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31_3DS data structure.
- */
+static void __init mx31_3ds_reserve(void)
+{
+	/* reserve MX31_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
+	mx3_camera_base = memblock_alloc(MX31_3DS_CAMERA_BUF_SIZE,
+					 MX31_3DS_CAMERA_BUF_SIZE);
+	memblock_free(mx3_camera_base, MX31_3DS_CAMERA_BUF_SIZE);
+	memblock_remove(mx3_camera_base, MX31_3DS_CAMERA_BUF_SIZE);
+}
+
 MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx31_3ds_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &mx31_3ds_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &mx31_3ds_timer,
+	.init_machine = mx31_3ds_init,
+	.reserve = mx31_3ds_reserve,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index 88b97d62b57e..4e4b780c481d 100644
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -69,12 +69,8 @@
 #define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
 
 #define MXC_MAX_EXP_IO_LINES	16
-/*
- * This file contains the board-specific initialization routines.
- */
 
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-/*!
+/*
  * The serial port definition structure.
  */
 static struct plat_serial8250_port serial_platform_data[] = {
@@ -110,14 +106,7 @@ static int __init mxc_init_extuart(void)
 {
 	return platform_device_register(&serial_device);
 }
-#else
-static inline int mxc_init_extuart(void)
-{
-	return 0;
-}
-#endif
 
-#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -134,11 +123,6 @@ static inline void mxc_init_imx_uart(void)
 	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
 	imx31_add_imx_uart0(&uart_pdata);
 }
-#else /* !SERIAL_IMX */
-static inline void mxc_init_imx_uart(void)
-{
-}
-#endif /* !SERIAL_IMX */
 
 static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
 {
@@ -160,7 +144,7 @@ static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
 
 /*
  * Disable an expio pin's interrupt by setting the bit in the imr.
- * @param irq           an expio virtual irq number
+ * @param d	an expio virtual irq description
  */
 static void expio_mask_irq(struct irq_data *d)
 {
@@ -172,7 +156,7 @@ static void expio_mask_irq(struct irq_data *d)
 
 /*
  * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
- * @param irq           an expanded io virtual irq number
+ * @param d	an expio virtual irq description
  */
 static void expio_ack_irq(struct irq_data *d)
 {
@@ -183,7 +167,7 @@ static void expio_ack_irq(struct irq_data *d)
 
 /*
  * Enable a expio pin's interrupt by clearing the bit in the imr.
- * @param irq           a expio virtual irq number
+ * @param d	an expio virtual irq description
  */
 static void expio_unmask_irq(struct irq_data *d)
 {
@@ -476,7 +460,6 @@ static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
 };
 #endif
 
-#if defined(CONFIG_I2C_IMX) || defined(CONFIG_I2C_IMX_MODULE)
 static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
 #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
 	{
@@ -497,11 +480,6 @@ static void mxc_init_i2c(void)
 
 	imx31_add_imx_i2c1(NULL);
 }
-#else
-static void mxc_init_i2c(void)
-{
-}
-#endif
 
 static unsigned int ssi_pins[] = {
 	MX31_PIN_SFS5__SFS5,
@@ -516,9 +494,7 @@ static void mxc_init_audio(void)
 	mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
 }
 
-/*!
- * This structure defines static mappings for the i.MX31ADS board.
- */
+/* static mappings */
 static struct map_desc mx31ads_io_desc[] __initdata = {
 	{
 		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
@@ -528,9 +504,6 @@ static struct map_desc mx31ads_io_desc[] __initdata = {
 	},
 };
 
-/*!
- * Set up static virtual mappings.
- */
 static void __init mx31ads_map_io(void)
 {
 	mx31_map_io();
@@ -543,10 +516,7 @@ static void __init mx31ads_init_irq(void)
 	mx31ads_init_expio();
 }
 
-/*!
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
+static void __init mx31ads_init(void)
 {
 	mxc_init_extuart();
 	mxc_init_imx_uart();
@@ -563,15 +533,12 @@ static struct sys_timer mx31ads_timer = {
 	.init	= mx31ads_timer_init,
 };
 
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31ADS data structure.
- */
 MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx31ads_map_io,
-	.init_irq       = mx31ads_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &mx31ads_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31ads_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31ads_init_irq,
+	.timer = &mx31ads_timer,
+	.init_machine = mx31ads_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index 2c595483f356..ed95745163b8 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
@@ -110,55 +111,9 @@ static struct platform_device physmap_flash_device = {
 
 /* USB */
 
-#if defined(CONFIG_USB_ULPI)
-
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
-static int usbotg_init(struct platform_device *pdev)
-{
-	unsigned int pins[] = {
-		MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-		MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-		MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-		MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-		MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-		MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-		MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-		MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-		MX31_PIN_USBOTG_CLK__USBOTG_CLK,
-		MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-		MX31_PIN_USBOTG_NXT__USBOTG_NXT,
-		MX31_PIN_USBOTG_STP__USBOTG_STP,
-	};
-
-	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB OTG");
-
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
-	mxc_iomux_set_gpr(MUX_PGP_USB_4WIRE, true);
-	mxc_iomux_set_gpr(MUX_PGP_USB_COMMON, true);
-
-	/* chip select */
-	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE2, IOMUX_CONFIG_GPIO),
-				"USBOTG_CS");
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), "USBH1 CS");
-	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), 0);
-
-	return 0;
-}
-
 static int usbh1_init(struct platform_device *pdev)
 {
 	int pins[] = {
@@ -183,7 +138,10 @@ static int usbh1_init(struct platform_device *pdev)
 
 	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
 
-	return 0;
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_SINGLE_UNI);
 }
 
 static int usbh2_init(struct platform_device *pdev)
@@ -220,41 +178,30 @@ static int usbh2_init(struct platform_device *pdev)
 	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
 	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
 
-	return 0;
-}
+	mdelay(10);
 
-static struct mxc_usbh_platform_data usbotg_pdata = {
-	.init	= usbotg_init,
-	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
-};
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
 
 static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
 	.init	= usbh1_init,
 	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
 };
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init	= usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static void lilly1131_usb_init(void)
 {
-	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
 	imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
-	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-}
 
-#else
-static inline void lilly1131_usb_init(void) {}
-#endif /* CONFIG_USB_ULPI */
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+}
 
 /* SPI */
 
@@ -274,8 +221,8 @@ static const struct spi_imx_master spi1_pdata __initconst = {
 	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
 };
 
-static struct mc13783_platform_data mc13783_pdata __initdata = {
-	.flags = MC13783_USE_RTC | MC13783_USE_TOUCHSCREEN,
+static struct mc13xxx_platform_data mc13783_pdata __initdata = {
+	.flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
 };
 
 static struct spi_board_info mc13783_dev __initdata = {
@@ -347,10 +294,10 @@ static struct sys_timer mx31lilly_timer = {
 };
 
 MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
-	.boot_params	= MX3x_PHYS_OFFSET + 0x100,
-	.map_io		= mx31_map_io,
-	.init_irq	= mx31_init_irq,
-	.init_machine	= mx31lilly_board_init,
-	.timer		= &mx31lilly_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &mx31lilly_timer,
+	.init_machine = mx31lilly_board_init,
 MACHINE_END
-
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index 9e64c66396e0..24a21a384bf1 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -27,6 +27,7 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 #include <linux/mtd/physmap.h>
+#include <linux/delay.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -111,9 +112,9 @@ static const struct spi_imx_master spi1_pdata __initconst = {
 	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
 };
 
-static struct mc13783_platform_data mc13783_pdata __initdata = {
-	.flags  = MC13783_USE_RTC |
-		  MC13783_USE_REGULATOR,
+static struct mc13xxx_platform_data mc13783_pdata __initdata = {
+	.flags  = MC13XXX_USE_RTC |
+		  MC13XXX_USE_REGULATOR,
 };
 
 static struct spi_board_info mc13783_spi_dev __initdata = {
@@ -129,7 +130,6 @@ static struct spi_board_info mc13783_spi_dev __initdata = {
  * USB
  */
 
-#if defined(CONFIG_USB_ULPI)
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -167,15 +167,15 @@ static int usbh2_init(struct platform_device *pdev)
 	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
 	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
 
-	return 0;
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
 }
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init   = usbh2_init,
 	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags  = MXC_EHCI_POWER_PINS_ENABLED,
 };
-#endif
 
 /*
  * NOR flash
@@ -227,7 +227,7 @@ void __init mx31lite_map_io(void)
 static int mx31lite_baseboard;
 core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
 
-static void __init mxc_board_init(void)
+static void __init mx31lite_init(void)
 {
 	int ret;
 
@@ -252,13 +252,11 @@ static void __init mxc_board_init(void)
 	imx31_add_spi_imx1(&spi1_pdata);
 	spi_register_board_info(&mc13783_spi_dev, 1);
 
-#if defined(CONFIG_USB_ULPI)
 	/* USB */
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
-	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 
 	/* SMSC9117 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
@@ -281,9 +279,10 @@ struct sys_timer mx31lite_timer = {
 
 MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx31lite_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &mx31lite_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31lite_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &mx31lite_timer,
+	.init_machine = mx31lite_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index 1aa8d65fccbb..3a021b01161d 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -214,7 +214,7 @@ static struct regulator_init_data cam_vreg_data = {
 	.consumer_supplies = cam_consumers,
 };
 
-static struct mc13783_regulator_init_data moboard_regulators[] = {
+static struct mc13xxx_regulator_init_data moboard_regulators[] = {
 	{
 		.id = MC13783_REG_VMMC1,
 		.init_data = &sdhc_vreg_data,
@@ -267,12 +267,14 @@ static struct mc13783_leds_platform_data moboard_leds = {
 	.tc2_period = MC13783_LED_PERIOD_10MS,
 };
 
-static struct mc13783_platform_data moboard_pmic = {
-	.regulators = moboard_regulators,
-	.num_regulators = ARRAY_SIZE(moboard_regulators),
+static struct mc13xxx_platform_data moboard_pmic = {
+	.regulators = {
+		.regulators = moboard_regulators,
+		.num_regulators = ARRAY_SIZE(moboard_regulators),
+	},
 	.leds = &moboard_leds,
-	.flags = MC13783_USE_REGULATOR | MC13783_USE_RTC |
-		MC13783_USE_ADC | MC13783_USE_LED,
+	.flags = MC13XXX_USE_REGULATOR | MC13XXX_USE_RTC |
+		MC13XXX_USE_ADC | MC13XXX_USE_LED,
 };
 
 static struct spi_board_info moboard_spi_board_info[] __initdata = {
@@ -400,19 +402,24 @@ static void usb_xcvr_reset(void)
 	mdelay(1);
 }
 
-#if defined(CONFIG_USB_ULPI)
+static int moboard_usbh2_init_hw(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+	.init	= moboard_usbh2_init_hw,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static int __init moboard_usbh2_init(void)
 {
 	struct platform_device *pdev;
 
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (!usbh2_pdata.otg)
+		return -ENODEV;
 
 	pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 	if (IS_ERR(pdev))
@@ -420,10 +427,6 @@ static int __init moboard_usbh2_init(void)
 
 	return 0;
 }
-#else
-static inline int moboard_usbh2_init(void) { return 0; }
-#endif
-
 
 static struct gpio_led mx31moboard_leds[] = {
 	{
@@ -503,7 +506,7 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init mx31moboard_init(void)
 {
 	mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
 		"moboard");
@@ -564,10 +567,10 @@ struct sys_timer mx31moboard_timer = {
 
 MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	/* Maintainer: Valentin Longchamp, EPFL Mobots group */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx31_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &mx31moboard_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &mx31moboard_timer,
+	.init_machine = mx31moboard_init,
 MACHINE_END
-
diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
index b1963f257c20..ff5fe231b8d6 100644
--- a/arch/arm/mach-mx3/mach-mx35_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -118,24 +118,42 @@ static iomux_v3_cfg_t mx35pdk_pads[] = {
 	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
 	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+	/* I2C1 */
+	MX35_PAD_I2C1_CLK__I2C1_SCL,
+	MX35_PAD_I2C1_DAT__I2C1_SDA,
 };
 
+static int mx35_3ds_otg_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
+}
+
 /* OTG config */
 static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
+	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
+/*
+ * ENGCM09152 also requires a hardware change.
+ * Please check the MX35 Chip Errata document for details.
+ */
 };
 
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= mx35_3ds_otg_init,
 	.portsc	= MXC_EHCI_MODE_UTMI,
-	.flags	= MXC_EHCI_INTERNAL_PHY,
 };
 
+static int mx35_3ds_usbh_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+			  MXC_EHCI_INTERNAL_PHY);
+}
+
 /* USB HOST config */
 static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
+	.init		= mx35_3ds_usbh_init,
 	.portsc		= MXC_EHCI_MODE_SERIAL,
-	.flags		= MXC_EHCI_INTERFACE_SINGLE_UNI |
-			  MXC_EHCI_INTERNAL_PHY,
 };
 
 static int otg_mode_host;
@@ -153,10 +171,14 @@ static int __init mx35_3ds_otg_mode(char *options)
 }
 __setup("otg_mode=", mx35_3ds_otg_mode);
 
+static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
+	.bitrate = 100000,
+};
+
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init mx35_3ds_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
 
@@ -180,6 +202,7 @@ static void __init mxc_board_init(void)
 	if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
 		pr_warn("Init of the debugboard failed, all "
 				"devices on the debugboard are unusable.\n");
+	imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
 }
 
 static void __init mx35pdk_timer_init(void)
@@ -193,9 +216,10 @@ struct sys_timer mx35pdk_timer = {
 
 MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	/* Maintainer: Freescale Semiconductor, Inc */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx35_map_io,
-	.init_irq       = mx35_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &mx35pdk_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx35_map_io,
+	.init_early = imx35_init_early,
+	.init_irq = mx35_init_irq,
+	.timer = &mx35pdk_timer,
+	.init_machine = mx35_3ds_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index b752f6bc20a2..f07d3bded674 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -533,17 +533,25 @@ static struct platform_device pcm970_sja1000 = {
 	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
 };
 
-#if defined(CONFIG_USB_ULPI)
+static int pcm037_otg_init(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= pcm037_otg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
+static int pcm037_usbh2_init(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+	.init	= pcm037_usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
-#endif
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -568,7 +576,7 @@ __setup("otg_mode=", pcm037_otg_mode);
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init pcm037_init(void)
 {
 	int ret;
 
@@ -646,19 +654,18 @@ static void __init mxc_board_init(void)
 
 	platform_device_register(&pcm970_sja1000);
 
-#if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
-		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
-		imx31_add_mxc_ehci_otg(&otg_pdata);
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
+		if (otg_pdata.otg)
+			imx31_add_mxc_ehci_otg(&otg_pdata);
 	}
 
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 
-	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
 	if (!otg_mode_host)
 		imx31_add_fsl_usb2_udc(&otg_device_pdata);
 
@@ -675,9 +682,10 @@ struct sys_timer pcm037_timer = {
 
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	/* Maintainer: Pengutronix */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx31_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &pcm037_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &pcm037_timer,
+	.init_machine = pcm037_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index fda56545d2fd..df6fb07d037e 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -180,9 +180,7 @@ static int __init eet_init_devices(void)
 
 	/* SPI */
 	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 	imx31_add_spi_imx0(&pcm037_spi1_pdata);
-#endif
 
 	platform_device_register(&pcm037_gpio_keys_device);
 
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index bcf83fc7e701..b3ecfb22d241 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -115,7 +115,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
 static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
 	.bitrate = 50000,
 };
@@ -134,7 +133,6 @@ static struct i2c_board_info pcm043_i2c_devices[] = {
 		I2C_BOARD_INFO("pcf8563", 0x51),
 	}
 };
-#endif
 
 static struct platform_device *devices[] __initdata = {
 	&pcm043_flash,
@@ -221,9 +219,9 @@ static iomux_v3_cfg_t pcm043_pads[] = {
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 };
 
-#define AC97_GPIO_TXFS	(1 * 32 + 31)
-#define AC97_GPIO_TXD	(1 * 32 + 28)
-#define AC97_GPIO_RESET	(1 * 32 + 0)
+#define AC97_GPIO_TXFS	IMX_GPIO_NR(2, 31)
+#define AC97_GPIO_TXD	IMX_GPIO_NR(2, 28)
+#define AC97_GPIO_RESET	IMX_GPIO_NR(2, 0)
 
 static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
 {
@@ -307,18 +305,26 @@ pcm037_nand_board_info __initconst = {
 	.hw_ecc = 1,
 };
 
-#if defined(CONFIG_USB_ULPI)
+static int pcm043_otg_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= pcm043_otg_init,
 	.portsc	= MXC_EHCI_MODE_UTMI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
+static int pcm043_usbh1_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
+}
+
 static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
+	.init	= pcm043_usbh1_init,
 	.portsc	= MXC_EHCI_MODE_SERIAL,
-	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
-		  MXC_EHCI_IPPUE_DOWN,
 };
-#endif
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -343,7 +349,7 @@ __setup("otg_mode=", pcm043_otg_mode);
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init pcm043_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
 
@@ -369,26 +375,22 @@ static void __init mxc_board_init(void)
 
 	imx35_add_imx_uart1(&uart_pdata);
 
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
 	i2c_register_board_info(0, pcm043_i2c_devices,
 			ARRAY_SIZE(pcm043_i2c_devices));
 
 	imx35_add_imx_i2c0(&pcm043_i2c0_data);
-#endif
 
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
 
-#if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
-		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
-		imx35_add_mxc_ehci_otg(&otg_pdata);
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
+		if (otg_pdata.otg)
+			imx35_add_mxc_ehci_otg(&otg_pdata);
 	}
-
 	imx35_add_mxc_ehci_hs(&usbh1_pdata);
-#endif
+
 	if (!otg_mode_host)
 		imx35_add_fsl_usb2_udc(&otg_device_pdata);
 
@@ -407,10 +409,10 @@ struct sys_timer pcm043_timer = {
 
 MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	/* Maintainer: Pengutronix */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx35_map_io,
-	.init_irq       = mx35_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &pcm043_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx35_map_io,
+	.init_early = imx35_init_early,
+	.init_irq = mx35_init_irq,
+	.timer = &pcm043_timer,
+	.init_machine = pcm043_init,
 MACHINE_END
-
diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c
index fd1050c40964..17f758b77623 100644
--- a/arch/arm/mach-mx3/mach-qong.c
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -54,10 +54,6 @@
 
 #define QONG_FPGA_IRQ		IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
 
-/*
- * This file contains the board-specific initialization routines.
- */
-
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -247,7 +243,7 @@ static void __init qong_init_fpga(void)
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init qong_init(void)
 {
 	mxc_init_imx_uart();
 	qong_init_nor_mtd();
@@ -263,16 +259,12 @@ static struct sys_timer qong_timer = {
 	.init	= qong_timer_init,
 };
 
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_QONG data structure.
- */
-
 MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	/* Maintainer: DENX Software Engineering GmbH */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx31_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &qong_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &qong_timer,
+	.init_machine = qong_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-mx3/mach-vpr200.c
new file mode 100644
index 000000000000..2cf390fbd980
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-vpr200.c
@@ -0,0 +1,328 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
+ * Copyright 2010 Creative Product Design
+ *
+ * Derived from mx35 3stack.
+ * Original author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx35.h>
+#include <mach/irqs.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/mfd/mc13xxx.h>
+#include <linux/gpio_keys.h>
+
+#include "devices-imx35.h"
+#include "devices.h"
+
+#define GPIO_LCDPWR	IMX_GPIO_NR(1, 2)
+#define GPIO_PMIC_INT	IMX_GPIO_NR(2, 0)
+
+#define GPIO_BUTTON1	IMX_GPIO_NR(1, 4)
+#define GPIO_BUTTON2	IMX_GPIO_NR(1, 5)
+#define GPIO_BUTTON3	IMX_GPIO_NR(1, 7)
+#define GPIO_BUTTON4	IMX_GPIO_NR(1, 8)
+#define GPIO_BUTTON5	IMX_GPIO_NR(1, 9)
+#define GPIO_BUTTON6	IMX_GPIO_NR(1, 10)
+#define GPIO_BUTTON7	IMX_GPIO_NR(1, 11)
+#define GPIO_BUTTON8	IMX_GPIO_NR(1, 12)
+
+static const struct fb_videomode fb_modedb[] = {
+	{
+		/* 800x480 @ 60 Hz */
+		.name		= "PT0708048",
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 480,
+		.pixclock	= KHZ2PICOS(33260),
+		.left_margin	= 50,
+		.right_margin	= 156,
+		.upper_margin	= 10,
+		.lower_margin	= 10,
+		.hsync_len	= 1,	/* note: DE only display */
+		.vsync_len	= 1,	/* note: DE only display */
+		.sync		= FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 800x480 @ 60 Hz */
+		.name		= "CTP-CLAA070LC0ACW",
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 480,
+		.pixclock	= KHZ2PICOS(27000),
+		.left_margin	= 50,
+		.right_margin	= 50,	/* whole line should have 900 clocks */
+		.upper_margin	= 10,
+		.lower_margin	= 10,	/* whole frame should have 500 lines */
+		.hsync_len	= 1,	/* note: DE only display */
+		.vsync_len	= 1,	/* note: DE only display */
+		.sync		= FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "PT0708048",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+static struct physmap_flash_data vpr200_flash_data = {
+	.width  = 2,
+};
+
+static struct resource vpr200_flash_resource = {
+	.start	= MX35_CS0_BASE_ADDR,
+	.end	= MX35_CS0_BASE_ADDR + SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device vpr200_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &vpr200_flash_data,
+	},
+	.resource = &vpr200_flash_resource,
+	.num_resources = 1,
+};
+
+static const struct mxc_nand_platform_data
+		vpr200_nand_board_info __initconst = {
+	.width = 1,
+	.hw_ecc = 1,
+	.flash_bbt = 1,
+};
+
+#define VPR_KEY_DEBOUNCE	500
+static struct gpio_keys_button vpr200_gpio_keys_table[] = {
+	{KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE},
+	{KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE},
+	{KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE},
+	{KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE},
+	{KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE},
+	{KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE},
+	{KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE},
+	{KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
+};
+
+static struct gpio_keys_platform_data vpr200_gpio_keys_data = {
+	.buttons = vpr200_gpio_keys_table,
+	.nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
+};
+
+static struct platform_device vpr200_device_gpiokeys = {
+	.name = "gpio-keys",
+	.dev = {
+		.platform_data = &vpr200_gpio_keys_data,
+	}
+};
+
+static struct mc13xxx_platform_data vpr200_pmic = {
+	.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
+};
+
+static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = {
+	.bitrate = 50000,
+};
+
+static struct at24_platform_data vpr200_eeprom = {
+	.byte_len = 2048 / 8,
+	.page_size = 1,
+};
+
+static struct i2c_board_info vpr200_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("at24", 0x50), /* E0=0, E1=0, E2=0 */
+		.platform_data = &vpr200_eeprom,
+	}, {
+		I2C_BOARD_INFO("mc13892", 0x08),
+		.platform_data = &vpr200_pmic,
+		.irq = gpio_to_irq(GPIO_PMIC_INT),
+	}
+};
+
+static iomux_v3_cfg_t vpr200_pads[] = {
+	/* UART1 */
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* UART3 */
+	MX35_PAD_ATA_DATA10__UART3_RXD_MUX,
+	MX35_PAD_ATA_DATA11__UART3_TXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* Display */
+	MX35_PAD_LD0__IPU_DISPB_DAT_0,
+	MX35_PAD_LD1__IPU_DISPB_DAT_1,
+	MX35_PAD_LD2__IPU_DISPB_DAT_2,
+	MX35_PAD_LD3__IPU_DISPB_DAT_3,
+	MX35_PAD_LD4__IPU_DISPB_DAT_4,
+	MX35_PAD_LD5__IPU_DISPB_DAT_5,
+	MX35_PAD_LD6__IPU_DISPB_DAT_6,
+	MX35_PAD_LD7__IPU_DISPB_DAT_7,
+	MX35_PAD_LD8__IPU_DISPB_DAT_8,
+	MX35_PAD_LD9__IPU_DISPB_DAT_9,
+	MX35_PAD_LD10__IPU_DISPB_DAT_10,
+	MX35_PAD_LD11__IPU_DISPB_DAT_11,
+	MX35_PAD_LD12__IPU_DISPB_DAT_12,
+	MX35_PAD_LD13__IPU_DISPB_DAT_13,
+	MX35_PAD_LD14__IPU_DISPB_DAT_14,
+	MX35_PAD_LD15__IPU_DISPB_DAT_15,
+	MX35_PAD_LD16__IPU_DISPB_DAT_16,
+	MX35_PAD_LD17__IPU_DISPB_DAT_17,
+	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+	/* LCD Enable */
+	MX35_PAD_D3_VSYNC__GPIO1_2,
+	/* USBOTG */
+	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
+	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
+	/* SDCARD */
+	MX35_PAD_SD1_CMD__ESDHC1_CMD,
+	MX35_PAD_SD1_CLK__ESDHC1_CLK,
+	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+	/* PMIC */
+	MX35_PAD_GPIO2_0__GPIO2_0,
+	/* GPIO keys */
+	MX35_PAD_SCKR__GPIO1_4,
+	MX35_PAD_COMPARE__GPIO1_5,
+	MX35_PAD_SCKT__GPIO1_7,
+	MX35_PAD_FST__GPIO1_8,
+	MX35_PAD_HCKT__GPIO1_9,
+	MX35_PAD_TX5_RX0__GPIO1_10,
+	MX35_PAD_TX4_RX1__GPIO1_11,
+	MX35_PAD_TX3_RX2__GPIO1_12,
+};
+
+/* USB Device config */
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI,
+	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
+};
+
+/* USB HOST config */
+static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
+	.portsc		= MXC_EHCI_MODE_SERIAL,
+	.flags		= MXC_EHCI_INTERFACE_SINGLE_UNI |
+			  MXC_EHCI_INTERNAL_PHY,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&vpr200_flash,
+	&vpr200_device_gpiokeys,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init vpr200_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
+
+	imx35_add_fec(NULL);
+	imx35_add_imx2_wdt(NULL);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR"))
+		printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n");
+	else
+		gpio_direction_output(GPIO_LCDPWR, 0);
+
+	if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT"))
+		printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n");
+	else
+		gpio_direction_input(GPIO_PMIC_INT);
+
+	imx35_add_imx_uart0(NULL);
+	imx35_add_imx_uart2(NULL);
+
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+	imx35_add_fsl_usb2_udc(&otg_device_pdata);
+	imx35_add_mxc_ehci_hs(&usb_host_pdata);
+
+	imx35_add_mxc_nand(&vpr200_nand_board_info);
+	imx35_add_sdhci_esdhc_imx(0, NULL);
+
+	i2c_register_board_info(0, vpr200_i2c_devices,
+			ARRAY_SIZE(vpr200_i2c_devices));
+
+	imx35_add_imx_i2c0(&vpr200_i2c0_data);
+}
+
+static void __init vpr200_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer vpr200_timer = {
+	.init	= vpr200_timer_init,
+};
+
+MACHINE_START(VPR200, "VPR200")
+	/* Maintainer: Creative Product Design */
+	.map_io = mx35_map_io,
+	.init_early = imx35_init_early,
+	.init_irq = mx35_init_irq,
+	.timer = &vpr200_timer,
+	.init_machine = vpr200_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 47118f760244..54d7174b4202 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -27,14 +27,8 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-v3.h>
-
-/*!
- * @file mm.c
- *
- * @brief This file creates static virtual to physical mappings, common to all MX3 boards.
- *
- * @ingroup Memory
- */
+#include <mach/gpio.h>
+#include <mach/irqs.h>
 
 #ifdef CONFIG_SOC_IMX31
 static struct map_desc mx31_io_desc[] __initdata = {
@@ -52,17 +46,25 @@ static struct map_desc mx31_io_desc[] __initdata = {
  */
 void __init mx31_map_io(void)
 {
+	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
+}
+
+void __init imx31_init_early(void)
+{
 	mxc_set_cpu_type(MXC_CPU_MX31);
 	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-
-	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
 }
 
-int imx31_register_gpios(void);
+static struct mxc_gpio_port imx31_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
+};
+
 void __init mx31_init_irq(void)
 {
 	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
-	imx31_register_gpios();
+	mxc_gpio_init(imx31_gpio_ports,	ARRAY_SIZE(imx31_gpio_ports));
 }
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
@@ -77,18 +79,26 @@ static struct map_desc mx35_io_desc[] __initdata = {
 
 void __init mx35_map_io(void)
 {
+	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
+}
+
+void __init imx35_init_early(void)
+{
 	mxc_set_cpu_type(MXC_CPU_MX35);
 	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-
-	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
 }
 
-int imx35_register_gpios(void);
+static struct mxc_gpio_port imx35_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
+};
+
 void __init mx35_init_irq(void)
 {
 	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-	imx35_register_gpios();
+	mxc_gpio_init(imx35_gpio_ports,	ARRAY_SIZE(imx35_gpio_ports));
 }
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
@@ -129,4 +139,3 @@ static int mxc_init_l2x0(void)
 
 arch_initcall(mxc_init_l2x0);
 #endif
-
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 94a0b9e4b7f3..6410b9c48a02 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -15,6 +15,7 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/types.h>
@@ -149,7 +150,10 @@ static int devboard_usbh1_hw_init(struct platform_device *pdev)
 	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
 	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
 
-	return 0;
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_SINGLE_UNI);
 }
 
 #define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
@@ -187,7 +191,6 @@ static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
 static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
 	.init	= devboard_usbh1_hw_init,
 	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
 };
 
 static int __init devboard_usbh1_init(void)
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index f449a97ae1a2..57f7b00cb709 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -265,7 +265,10 @@ static int marxbot_usbh1_hw_init(struct platform_device *pdev)
 	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
 	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
 
-	return 0;
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_SINGLE_UNI);
 }
 
 #define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
@@ -303,7 +306,6 @@ static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
 static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
 	.init	= marxbot_usbh1_hw_init,
 	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
 };
 
 static int __init marxbot_usbh1_init(void)
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
index bbec3c82264a..35f806e737c1 100644
--- a/arch/arm/mach-mx3/mx31moboard-smartbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -123,17 +123,24 @@ static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 
 #if defined(CONFIG_USB_ULPI)
 
+static int smartbot_otg_init(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
+
 static struct mxc_usbh_platform_data otg_host_pdata __initdata = {
+	.init	= smartbot_otg_init,
 	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static int __init smartbot_otg_host_init(void)
 {
 	struct platform_device *pdev;
 
-	otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+	otg_host_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+		ULPI_OTG_DRVVBUS_EXT);
+	if (!otg_host_pdata.otg)
+		return -ENODEV;
 
 	pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata);
 	if (IS_ERR(pdev))