diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-05-07 11:02:18 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-05-07 11:02:18 -0700 |
commit | fcba914542082b272f31c8e4c40000b88ed3208d (patch) | |
tree | fb28069bf571d93420daafd501b4e97f221d526c /arch/arm/mach-imx/src.c | |
parent | a8c4b90e670be3b01e9395c7310639c8109fc77e (diff) | |
parent | 5c5f0421a8eea5bdaba9b9313c5bb4833aeb39cd (diff) | |
download | talos-obmc-linux-fcba914542082b272f31c8e4c40000b88ed3208d.tar.gz talos-obmc-linux-fcba914542082b272f31c8e4c40000b88ed3208d.zip |
Merge tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates (part 3) from Arnd Bergmann:
"This is the third and smallest of the SoC specific updates. Changes
include:
- SMP support for the Xilinx zynq platform
- Smaller imx changes
- LPAE support for mvebu
- Moving the orion5x, kirkwood, dove and mvebu platforms to a common
"mbus" driver for their internal devices.
It would be good to get feedback on the location of the "mbus" driver.
Since this is used on multiple platforms may potentially get shared
with other architectures (powerpc and arm64), it was moved to
drivers/bus/. We expect other similar drivers to get moved to the
same place in order to avoid creating more top-level directories under
drivers/ or cluttering up the messy drivers/misc/ even more."
* tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
ARM: imx: reset_controller may be disabled
ARM: mvebu: Align the internal registers virtual base to support LPAE
ARM: mvebu: Limit the DMA zone when LPAE is selected
arm: plat-orion: remove addr-map code
arm: mach-mv78xx0: convert to use the mvebu-mbus driver
arm: mach-orion5x: convert to use mvebu-mbus driver
arm: mach-dove: convert to use mvebu-mbus driver
arm: mach-kirkwood: convert to use mvebu-mbus driver
arm: mach-mvebu: convert to use mvebu-mbus driver
ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock
ARM i.MX53: tve_di clock is not part of the CCM, but of TVE
ARM i.MX53: make tve_ext_sel propagate rate change to PLL
ARM i.MX53: Remove unused tve_gate clkdev entry
ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree
ARM: i.MX5: Add PATA and SRTC clocks
ARM: imx: do not bring up unavailable cores
ARM: imx: add initial imx6dl support
ARM: imx1: mm: add call to mxc_device_init
ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS
ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS
...
Diffstat (limited to 'arch/arm/mach-imx/src.c')
-rw-r--r-- | arch/arm/mach-imx/src.c | 66 |
1 files changed, 66 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 97d086889481..10a6b1a8c5ac 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -14,6 +14,7 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/reset-controller.h> #include <linux/smp.h> #include <asm/smp_plat.h> #include "common.h" @@ -21,10 +22,65 @@ #define SRC_SCR 0x000 #define SRC_GPR1 0x020 #define BP_SRC_SCR_WARM_RESET_ENABLE 0 +#define BP_SRC_SCR_SW_GPU_RST 1 +#define BP_SRC_SCR_SW_VPU_RST 2 +#define BP_SRC_SCR_SW_IPU1_RST 3 +#define BP_SRC_SCR_SW_OPEN_VG_RST 4 +#define BP_SRC_SCR_SW_IPU2_RST 12 #define BP_SRC_SCR_CORE1_RST 14 #define BP_SRC_SCR_CORE1_ENABLE 22 static void __iomem *src_base; +static DEFINE_SPINLOCK(scr_lock); + +static const int sw_reset_bits[5] = { + BP_SRC_SCR_SW_GPU_RST, + BP_SRC_SCR_SW_VPU_RST, + BP_SRC_SCR_SW_IPU1_RST, + BP_SRC_SCR_SW_OPEN_VG_RST, + BP_SRC_SCR_SW_IPU2_RST +}; + +static int imx_src_reset_module(struct reset_controller_dev *rcdev, + unsigned long sw_reset_idx) +{ + unsigned long timeout; + unsigned long flags; + int bit; + u32 val; + + if (!src_base) + return -ENODEV; + + if (sw_reset_idx >= ARRAY_SIZE(sw_reset_bits)) + return -EINVAL; + + bit = 1 << sw_reset_bits[sw_reset_idx]; + + spin_lock_irqsave(&scr_lock, flags); + val = readl_relaxed(src_base + SRC_SCR); + val |= bit; + writel_relaxed(val, src_base + SRC_SCR); + spin_unlock_irqrestore(&scr_lock, flags); + + timeout = jiffies + msecs_to_jiffies(1000); + while (readl(src_base + SRC_SCR) & bit) { + if (time_after(jiffies, timeout)) + return -ETIME; + cpu_relax(); + } + + return 0; +} + +static struct reset_control_ops imx_src_ops = { + .reset = imx_src_reset_module, +}; + +static struct reset_controller_dev imx_reset_controller = { + .ops = &imx_src_ops, + .nr_resets = ARRAY_SIZE(sw_reset_bits), +}; void imx_enable_cpu(int cpu, bool enable) { @@ -32,9 +88,11 @@ void imx_enable_cpu(int cpu, bool enable) cpu = cpu_logical_map(cpu); mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1); + spin_lock(&scr_lock); val = readl_relaxed(src_base + SRC_SCR); val = enable ? val | mask : val & ~mask; writel_relaxed(val, src_base + SRC_SCR); + spin_unlock(&scr_lock); } void imx_set_cpu_jump(int cpu, void *jump_addr) @@ -61,9 +119,11 @@ void imx_src_prepare_restart(void) u32 val; /* clear enable bits of secondary cores */ + spin_lock(&scr_lock); val = readl_relaxed(src_base + SRC_SCR); val &= ~(0x7 << BP_SRC_SCR_CORE1_ENABLE); writel_relaxed(val, src_base + SRC_SCR); + spin_unlock(&scr_lock); /* clear persistent entry register of primary core */ writel_relaxed(0, src_base + SRC_GPR1); @@ -80,11 +140,17 @@ void __init imx_src_init(void) src_base = of_iomap(np, 0); WARN_ON(!src_base); + imx_reset_controller.of_node = np; + if (IS_ENABLED(CONFIG_RESET_CONTROLLER)) + reset_controller_register(&imx_reset_controller); + /* * force warm reset sources to generate cold reset * for a more reliable restart */ + spin_lock(&scr_lock); val = readl_relaxed(src_base + SRC_SCR); val &= ~(1 << BP_SRC_SCR_WARM_RESET_ENABLE); writel_relaxed(val, src_base + SRC_SCR); + spin_unlock(&scr_lock); } |