[ARM] 5264/2: [AT91] Suspend-to-RAM disables main oscillator

This patch adds support for a low(er)-power suspend-to-RAM.
In addition to the SDRAM being put into self-refresh mode, the Master
Clock is set to the Slow-clock rate (32Khz) and PLLA & PLLB are
disabled.
Certain peripherals are therefore also disabled, and thus cannot be
used as wakeup sources.

This patch has been included in the AT91 patches in various forms
since 2.6.19 and a number of people have worked or commented on it,
most notably:
 Savin Zlobec (for the original AT91RM9200 support)
 Anti Sullin (for the SAM9260 version)
 David Brownell, etc.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 283 insertions, 0 deletions

diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
new file mode 100644
index 000000000000..987fab3d846a
--- /dev/null
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -0,0 +1,283 @@
+/*
+ * arch/arm/mach-at91/pm_slow_clock.S
+ *
+ *  Copyright (C) 2006 Savin Zlobec
+ *
+ * AT91SAM9 support:
+ *  Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+
+#ifdef CONFIG_ARCH_AT91RM9200
+#include <mach/at91rm9200_mc.h>
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <mach/at91cap9_ddrsdr.h>
+#else
+#include <mach/at91sam9_sdramc.h>
+#endif
+
+
+#ifdef CONFIG_ARCH_AT91SAM9263
+/*
+ * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
+ * handle those cases both here and in the Suspend-To-RAM support.
+ */
+#define AT91_SDRAMC	AT91_SDRAMC0
+#warning Assuming EB1 SDRAM controller is *NOT* used
+#endif
+
+/*
+ * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
+ * clock during suspend by adjusting its prescalar and divisor.
+ * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
+ *       are errata regarding adjusting the prescalar and divisor.
+ */
+#undef SLOWDOWN_MASTER_CLOCK
+
+#define MCKRDY_TIMEOUT		1000
+#define MOSCRDY_TIMEOUT 	1000
+#define PLLALOCK_TIMEOUT	1000
+#define PLLBLOCK_TIMEOUT	1000
+
+
+/*
+ * Wait until master clock is ready (after switching master clock source)
+ */
+	.macro wait_mckrdy
+	mov	r4, #MCKRDY_TIMEOUT
+1:	sub	r4, r4, #1
+	cmp	r4, #0
+	beq	2f
+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+	tst	r3, #AT91_PMC_MCKRDY
+	beq	1b
+2:
+	.endm
+
+/*
+ * Wait until master oscillator has stabilized.
+ */
+	.macro wait_moscrdy
+	mov	r4, #MOSCRDY_TIMEOUT
+1:	sub	r4, r4, #1
+	cmp	r4, #0
+	beq	2f
+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+	tst	r3, #AT91_PMC_MOSCS
+	beq	1b
+2:
+	.endm
+
+/*
+ * Wait until PLLA has locked.
+ */
+	.macro wait_pllalock
+	mov	r4, #PLLALOCK_TIMEOUT
+1:	sub	r4, r4, #1
+	cmp	r4, #0
+	beq	2f
+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+	tst	r3, #AT91_PMC_LOCKA
+	beq	1b
+2:
+	.endm
+
+/*
+ * Wait until PLLB has locked.
+ */
+	.macro wait_pllblock
+	mov	r4, #PLLBLOCK_TIMEOUT
+1:	sub	r4, r4, #1
+	cmp	r4, #0
+	beq	2f
+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+	tst	r3, #AT91_PMC_LOCKB
+	beq	1b
+2:
+	.endm
+
+	.text
+
+ENTRY(at91_slow_clock)
+	/* Save registers on stack */
+	stmfd	sp!, {r0 - r12, lr}
+
+	/*
+	 * Register usage:
+	 *  R1 = Base address of AT91_PMC
+	 *  R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200)
+	 *  R3 = temporary register
+	 *  R4 = temporary register
+	 */
+	ldr	r1, .at91_va_base_pmc
+	ldr	r2, .at91_va_base_sdramc
+
+	/* Drain write buffer */
+	mcr	p15, 0, r0, c7, c10, 4
+
+#ifdef CONFIG_ARCH_AT91RM9200
+	/* Put SDRAM in self-refresh mode */
+	mov	r3, #1
+	str	r3, [r2, #AT91_SDRAMC_SRR]
+#elif defined(CONFIG_ARCH_AT91CAP9)
+	/* Enable SDRAM self-refresh mode */
+	ldr	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+	str	r3, .saved_sam9_lpr
+
+	mov	r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+#else
+	/* Enable SDRAM self-refresh mode */
+	ldr	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+	str	r3, .saved_sam9_lpr
+
+	mov	r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+#endif
+
+	/* Save Master clock setting */
+	ldr	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+	str	r3, .saved_mckr
+
+	/*
+	 * Set the Master clock source to slow clock
+	 */
+	bic	r3, r3, #AT91_PMC_CSS
+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+	wait_mckrdy
+
+#ifdef SLOWDOWN_MASTER_CLOCK
+	/*
+	 * Set the Master Clock PRES and MDIV fields.
+	 *
+	 * See AT91RM9200 errata #27 and #28 for details.
+	 */
+	mov	r3, #0
+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+	wait_mckrdy
+#endif
+
+	/* Save PLLA setting and disable it */
+	ldr	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+	str	r3, .saved_pllar
+
+	mov	r3, #AT91_PMC_PLLCOUNT
+	orr	r3, r3, #(1 << 29)		/* bit 29 always set */
+	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+
+	wait_pllalock
+
+	/* Save PLLB setting and disable it */
+	ldr	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+	str	r3, .saved_pllbr
+
+	mov	r3, #AT91_PMC_PLLCOUNT
+	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+
+	wait_pllblock
+
+	/* Turn off the main oscillator */
+	ldr	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+	bic	r3, r3, #AT91_PMC_MOSCEN
+	str	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+
+	/* Wait for interrupt */
+	mcr	p15, 0, r0, c7, c0, 4
+
+	/* Turn on the main oscillator */
+	ldr	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+	orr	r3, r3, #AT91_PMC_MOSCEN
+	str	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+
+	wait_moscrdy
+
+	/* Restore PLLB setting */
+	ldr	r3, .saved_pllbr
+	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+
+	wait_pllblock
+
+	/* Restore PLLA setting */
+	ldr	r3, .saved_pllar
+	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+
+	wait_pllalock
+
+#ifdef SLOWDOWN_MASTER_CLOCK
+	/*
+	 * First set PRES if it was not 0,
+	 * than set CSS and MDIV fields.
+	 *
+	 * See AT91RM9200 errata #27 and #28 for details.
+	 */
+	ldr	r3, .saved_mckr
+	tst	r3, #AT91_PMC_PRES
+	beq	2f
+	and	r3, r3, #AT91_PMC_PRES
+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+	wait_mckrdy
+#endif
+
+	/*
+	 * Restore master clock setting
+	 */
+2:	ldr	r3, .saved_mckr
+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+	wait_mckrdy
+
+#ifdef CONFIG_ARCH_AT91RM9200
+	/* Do nothing - self-refresh is automatically disabled. */
+#elif defined(CONFIG_ARCH_AT91CAP9)
+	/* Restore LPR on AT91CAP9 */
+	ldr	r3, .saved_sam9_lpr
+	str	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+#else
+	/* Restore LPR on AT91SAM9 */
+	ldr	r3, .saved_sam9_lpr
+	str	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+#endif
+
+	/* Restore registers, and return */
+	ldmfd	sp!, {r0 - r12, pc}
+
+
+.saved_mckr:
+	.word 0
+
+.saved_pllar:
+	.word 0
+
+.saved_pllbr:
+	.word 0
+
+.saved_sam9_lpr:
+	.word 0
+
+.at91_va_base_pmc:
+	.word AT91_VA_BASE_SYS + AT91_PMC
+
+#ifdef CONFIG_ARCH_AT91RM9200
+.at91_va_base_sdramc:
+	.word AT91_VA_BASE_SYS
+#elif defined(CONFIG_ARCH_AT91CAP9)
+.at91_va_base_sdramc:
+	.word AT91_VA_BASE_SYS + AT91_DDRSDRC
+#else
+.at91_va_base_sdramc:
+	.word AT91_VA_BASE_SYS + AT91_SDRAMC
+#endif
+
+ENTRY(at91_slow_clock_sz)
+	.word .-at91_slow_clock