Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Olof Johansson:
 "Ladies and gentlemen, we proudly announce to you the latest branch of
  ARM device tree contents for the mainline kernel.  Come and see, come
  and see!

  No less than twentythree thousand lines of additions! Just imagine the
  joy you will have of using your mainline kernel on newly supported
  hardware such as Rockchip Chromebooks, Freescale i.MX6UL boards or
  UniPhier hardware!

  For those of you feeling less adventurous, added hardware support on
  platforms such as TI DM814x and Gumstix Overo platforms might be more
  of your liking.

  We've got something for everyone here!

  Ahem.  Cough.  So, anyway...

  This is the usual large batch of DT updates.  Lots and lots of smaller
  changes, some of the larger ones to point out are:

   - Rockchip veyron (Chromebook) support, as well as several other new boards
   - DRM support on Atmel AT91SAM9N12EK
   - USB additions on some Allwinner platforms
   - Mediatek MT6580 support
   - Freescale i.MX6UL support
   - cleanups for Renesas shmobile platforms
   - lots of added devices on LPC18xx
   - lots of added devices and boards on UniPhier

  There's also some dependent code added here, in particular some
  branches that are primarily merged through the clock tree"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (389 commits)
  ARM: tegra: Add gpio-ranges property
  ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114
  ARM: tegra: Add Tegra124 PMU support
  ARM: tegra: jetson-tk1: Add GK20A GPU DT node
  ARM: tegra: venice2: Add GK20A GPU DT node
  ARM: tegra: Add IOMMU node to GK20A
  ARM: tegra: Add CPU regulator to the Jetson TK1 device tree
  ARM: tegra: Add entries for cpufreq on Tegra124
  ARM: tegra: Enable the DFLL on the Jetson TK1
  ARM: tegra: Add the DFLL to Tegra124 device tree
  ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.
  ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes
  ARM: dts: rockchip: correct regulator power states for suspend
  ARM: dts: rockchip: correct regulator PM properties
  ARM: dts: vexpress: Use assigned-clock-parents for sp810
  pinctrl: tegra: Only set the gpio range if needed
  arm: boot: dts: am4372: add ARM timers and SCU nodes
  ARM: dts: AM4372: Add the am4372-rtc compatible string
  ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain
  ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain
  ...

1 files changed, 254 insertions, 6 deletions

diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index c42cf8db0451..b738ce0f9d9b 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -121,6 +121,209 @@
 		clock-output-names = "osc";
 	};
 
+	etr@30086000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0x30086000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		port {
+			etr_in_port: endpoint {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port1>;
+			};
+		};
+	};
+
+	tpiu@30087000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0x30087000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		port {
+			tpiu_in_port: endpoint {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port1>;
+			};
+		};
+	};
+
+	replicator {
+		/*
+		 * non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell"
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etr_in_port>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&etf_out_port>;
+				};
+			};
+		};
+	};
+
+	etf@30084000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0x30084000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				etf_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&hugo_funnel_out_port0>;
+				};
+			};
+
+			port@1 {
+				reg = <0>;
+				etf_out_port: endpoint {
+					remote-endpoint = <&replicator_in_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@30083000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0x30083000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel input ports */
+			port@0 {
+				reg = <0>;
+				hugo_funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&ca_funnel_out_port0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				hugo_funnel_in_port1: endpoint {
+					slave-mode; /* M4 input */
+				};
+			};
+
+			port@2 {
+				reg = <0>;
+				hugo_funnel_out_port0: endpoint {
+					remote-endpoint = <&etf_in_port>;
+				};
+			};
+
+			/* the other input ports are not connect to anything */
+		};
+	};
+
+	funnel@30041000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0x30041000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel input ports */
+			port@0 {
+				reg = <0>;
+				ca_funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&etm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				ca_funnel_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&etm1_out_port>;
+				};
+			};
+
+			/* funnel output port */
+			port@2 {
+				reg = <0>;
+				ca_funnel_out_port0: endpoint {
+					remote-endpoint = <&hugo_funnel_in_port0>;
+				};
+			};
+
+			/* the other input ports are not connect to anything */
+		};
+	};
+
+	etm@3007c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x3007c000 0x1000>;
+		cpu = <&cpu0>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		port {
+			etm0_out_port: endpoint {
+				remote-endpoint = <&ca_funnel_in_port0>;
+			};
+		};
+	};
+
+	etm@3007d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x3007d000 0x1000>;
+
+		/*
+		 * System will hang if added nosmp in kernel command line
+		 * without arm,primecell-periphid because amba bus try to
+		 * read id and core1 power off at this time.
+		 */
+		arm,primecell-periphid = <0xbb956>;
+		cpu = <&cpu1>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		port {
+			etm1_out_port: endpoint {
+				remote-endpoint = <&ca_funnel_in_port1>;
+			};
+		};
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -212,6 +415,37 @@
 				#interrupt-cells = <2>;
 			};
 
+			wdog1: wdog@30280000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
+			};
+
+			wdog2: wdog@30290000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			wdog3: wdog@302a0000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			wdog4: wdog@302b0000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x302b0000 0x10000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
+				status = "disabled";
+			};
+
 			gpt1: gpt@302d0000 {
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x302d0000 0x10000>;
@@ -291,17 +525,31 @@
 			};
 
 			snvs: snvs@30370000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x30370000 0x10000>;
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
 
-				snvs-rtc-lp@34 {
+				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
+					regmap = <&snvs>;
+					offset = <0x34>;
 					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+				};
 			};
 
 			clks: ccm@30380000 {