Merge tag 'at91-for-next-dt' of git://github.com/at91linux/linux-at91 into next/dt

"Jean-Christophe PLAGNIOL-VILLARD" <plagnioj@jcrosoft.com> writes:

 ARM: AT91 more DT material

 New SoC conversion and boards support

 SoC convertion to DT:
  - at91sam9260
  - at91sam9263

 boards:
  - Atmel at91sam9g20ek/9263ek
  - Calao TNY-A9260/A9263/A9G20
  - Calao USB-A9260/A9263
  - Ethernnut 5
  - Kizbox

* tag 'at91-for-next-dt' of git://github.com/at91linux/linux-at91: (32 commits)
  Ethernut 5 board support
  ARM: at91: add kizbox board dt support.
  ARM: at91: DT: add Calao TNY A9263 board support
  ARM: at91: DT: add Calao USB A9263 board support
  ARM: at91: add at91sam9263ek DT support
  ARM: at91: add at91sam9263 DT support
  ARM: at91: standard device init only if DT is not populated.
  ARM: at91: DT: add Calao USB A9260 DT support
  ARM: at91: Calao USB A926x factorize common binding in usb_a9260_common
  ARM: at91: USB A926x update nand partition
  ARM: at91: add at91sam9g20ek boards dt support
  arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support
  ARM: at91: add at91sam9260 DT support
  ARM: at91: add defconfig for device tree
  ARM: at91/dt: do not specify the board any more
  ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support
  ARM: at91: add SOC_AT91SAM9 kconfig option to factorise select
  ARM: at91: pm select memory controler at runtime
  ARM: at91: move at91_init_leds to board init
  ARM: at91: do not pin mux the UARTs in init_early
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[olof: rebuilt branch due to drop of an early merge]
Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 156 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
new file mode 100644
index 000000000000..f86ac4b609fc
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -0,0 +1,156 @@
+/*
+ * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+/include/ "at91sam9263.dtsi"
+
+/ {
+	model = "Atmel at91sam9263ek";
+	compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <16367660>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			usart0: serial@fff8c000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioA 25 0>;
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt = <1>;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree@80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+
+		usb0: ohci@00a00000 {
+			num-ports = <2>;
+			status = "okay";
+			atmel,vbus-gpio = <&pioA 24 0
+					   &pioA 21 0
+					  >;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d3 {
+			label = "d3";
+			gpios = <&pioB 7 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		d2 {
+			label = "d2";
+			gpios = <&pioC 29 1>;
+			linux,default-trigger = "nand-disk";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		left_click {
+			label = "left_click";
+			gpios = <&pioC 5 1>;
+			linux,code = <272>;
+			gpio-key,wakeup;
+		};
+
+		right_click {
+			label = "right_click";
+			gpios = <&pioC 4 1>;
+			linux,code = <273>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "24c512";
+			reg = <0x50>;
+			pagesize = <128>;
+		};
+	};
+};