dt-bindings: Remove "status" from examples

Pretty much any node can have a status property, so it doesn't need to
be in examples.

Converted with the following command and removed examples with SoC and
board specific splits:

git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d'

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
index 0536a938e3ab..50a31536e975 100644
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
@@ -29,13 +29,11 @@ Example device nodes:
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-		status = "disabled";
 		usbdrd_dwc3_0: dwc3@fe800000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0xfe800000 0x0 0x100000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "otg";
-			status = "disabled";
 		};
 	};
 
@@ -48,12 +46,10 @@ Example device nodes:
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-		status = "disabled";
 		usbdrd_dwc3_1: dwc3@fe900000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0xfe900000 0x0 0x100000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "otg";
-			status = "disabled";
 		};
 	};