Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "These changes from 30 individual branches for the most part update
  device tree files, but there are also a few source code changes that
  have crept in this time, usually in order to atomically move over a
  driver from using hardcoded data to DT probing.

  A number of platforms change their DT files to use the C preprocessor,
  which is causing a bit of churn, but that is hopefully only this once"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits)
  ARM: at91: dt: rm9200ek: add spi support
  ARM: at91: dt: rm9200: add spi support
  ARM: at91/DT: at91sam9n12: add SPI DMA client infos
  ARM: at91/DT: sama5d3: add SPI DMA client infos
  ARM: at91/DT: fix SPI compatibility string
  ARM: Kirkwood: Fix the internal register ranges translation
  ARM: dts: bcm281xx: change comment to C89 style
  ARM: mmc: bcm281xx SDHCI driver (dt mods)
  ARM: nomadik: add the new clocks to the device tree
  clk: nomadik: implement the Nomadik clocks properly
  ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
  ARM: dts: omap4-panda: Fix DVI EDID reads
  ARM: dts: omap4-panda: Add USB Host support
  arm: mvebu: enable mini-PCIe connectors on Armada 370 RD
  ARM: shmobile: irqpin: add a DT property to enable masking on parent
  ARM: dts: AM43x EPOS EVM support
  ARM: dts: OMAP5: Add bandgap DT entry
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  ...

1 files changed, 4 insertions, 150 deletions

diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
index e885680f6b45..fcfed5bf73fb 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
@@ -12,155 +12,9 @@ Required properties :
 - clocks : Should contain phandle and clock specifiers for two clocks:
   the 32 KHz "32k_in", and the board-specific oscillator "osc".
 - #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the CAR.
-
-  The first 96 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
-  registers. These IDs often match those in the CAR's RST_DEVICES registers,
-  but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
-  this case, those clocks are assigned IDs above 95 in order to highlight
-  this issue. Implementations that interpret these clock IDs as bit values
-  within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
-  explicitly handle these special cases.
-
-  The balance of the clocks controlled by the CAR are assigned IDs of 96 and
-  above.
-
-  0	cpu
-  1	unassigned
-  2	unassigned
-  3	ac97
-  4	rtc
-  5	tmr
-  6	uart1
-  7	unassigned	(register bit affects uart2 and vfir)
-  8	gpio
-  9	sdmmc2
-  10	unassigned	(register bit affects spdif_in and spdif_out)
-  11	i2s1
-  12	i2c1
-  13	ndflash
-  14	sdmmc1
-  15	sdmmc4
-  16	twc
-  17	pwm
-  18	i2s2
-  19	epp
-  20	unassigned	(register bit affects vi and vi_sensor)
-  21	2d
-  22	usbd
-  23	isp
-  24	3d
-  25	ide
-  26	disp2
-  27	disp1
-  28	host1x
-  29	vcp
-  30	unassigned
-  31	cache2
-
-  32	mem
-  33	ahbdma
-  34	apbdma
-  35	unassigned
-  36	kbc
-  37	stat_mon
-  38	pmc
-  39	fuse
-  40	kfuse
-  41	sbc1
-  42	snor
-  43	spi1
-  44	sbc2
-  45	xio
-  46	sbc3
-  47	dvc
-  48	dsi
-  49	unassigned	(register bit affects tvo and cve)
-  50	mipi
-  51	hdmi
-  52	csi
-  53	tvdac
-  54	i2c2
-  55	uart3
-  56	unassigned
-  57	emc
-  58	usb2
-  59	usb3
-  60	mpe
-  61	vde
-  62	bsea
-  63	bsev
-
-  64	speedo
-  65	uart4
-  66	uart5
-  67	i2c3
-  68	sbc4
-  69	sdmmc3
-  70	pcie
-  71	owr
-  72	afi
-  73	csite
-  74	unassigned
-  75	avpucq
-  76	la
-  77	unassigned
-  78	unassigned
-  79	unassigned
-  80	unassigned
-  81	unassigned
-  82	unassigned
-  83	unassigned
-  84	irama
-  85	iramb
-  86	iramc
-  87	iramd
-  88	cram2
-  89	audio_2x	a/k/a audio_2x_sync_clk
-  90	clk_d
-  91	unassigned
-  92	sus
-  93	cdev2
-  94	cdev1
-  95	unassigned
-
-  96	uart2
-  97	vfir
-  98	spdif_in
-  99	spdif_out
-  100	vi
-  101	vi_sensor
-  102	tvo
-  103	cve
-  104	osc
-  105	clk_32k		a/k/a clk_s
-  106	clk_m
-  107	sclk
-  108	cclk
-  109	hclk
-  110	pclk
-  111	blink
-  112	pll_a
-  113	pll_a_out0
-  114	pll_c
-  115	pll_c_out1
-  116	pll_d
-  117	pll_d_out0
-  118	pll_e
-  119	pll_m
-  120	pll_m_out1
-  121	pll_p
-  122	pll_p_out1
-  123	pll_p_out2
-  124	pll_p_out3
-  125	pll_p_out4
-  126	pll_s
-  127	pll_u
-  128	pll_x
-  129	cop		a/k/a avp
-  130	audio		a/k/a audio_sync_clk
-  131	pll_ref
-  132	twd
+  In clock consumers, this cell represents the clock ID exposed by the
+  CAR. The assignments may be found in header file
+  <dt-bindings/clock/tegra20-car.h>.
 
 Example SoC include file:
 
@@ -172,7 +26,7 @@ Example SoC include file:
 	};
 
 	usb@c5004000 {
-		clocks = <&tegra_car 58>; /* usb2 */
+		clocks = <&tegra_car TEGRA20_CLK_USB2>;
 	};
 };