Merge tag 'iio-for-3.20a_take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing

Jonathan writes:

First round of IIO new drivers, cleanups and functionality for the 3.20 cycle take 2

Updated pull request with Daniel's fix on top for the power management
Kconfig changes that had snuck in since last update of the IIO tree
worked it's way through from mainline.

Original pull message

New device support
* jsa1212 proxmity / ambient light sensor
* SM08500 supported added to the kxcjk-1013 accelerometer driver
* KMX61 Accelerometer/Magnetometer.  This took a somewhat rocky path
  being first merged, then reverted for a rewrite after a discussion of
  how to support additional functionality and finally being merged prior
  to some last reviews coming in, with resultant follow up patches.
* Freescale mma9551l driver (minor follow up warning supression patch).
* Semtech SX9500 proximity device driver.
* ak8975 gains support for ak09911 and ak09912 and drop the standalone driver
  for the ak09911.

New functionality
 * Dummy driver gains some virtual registers making it more flexible.
 * IIO_ACTIVITY channel types, with modifiers running, walking etc.  This is
   to support on chip motion clasifiers.  As such it is in the form of a
   confidence percentage.  The only devices so far only do binary decisions
   but this gives us room when other devices give more nuanced clasification.
 * IIO_EV_DIR_NONE type for events where there is no obvious direction.
   First case is step detection.
 * IIO_STEPS channel type for pedometers.
 * ENABLE mask element used to control turning on counting types such as
   the pedometer that need a 'start point'.
 * INSTANCE event type to support things that happen once.
 * info element for height calibration (used in various motion estimation
   algorithms). Note heigh tof use
 * dummy driver demonstration of the use of all the new bits above.
 * event monitor support for the new events.
 * inv_mpu6050 gains an i2c mux to allow bypassing the device to access
   additional devices connected on the other side of it.  Note that in
   Windows these are handled by firmware on the device and not exposed
   directly.
 * inv_mpu6050 gains ACPI enumeration.
 * inkern interface gains iio_write_channel_raw to allow in kernel users
   of DAC functionality via a simple wrapper.
 * Document input current readings in the ABI docs.
 * Add an error message when we get an out of range error in device tree
   processing for the in kernel interfaces.  Basically a device tree debugging
   aid.
 * Add a sanity check that a scan index for a channel is unique during
   registration.  There to help catch bugs as this should never happen
   in a bug free driver.

Cleanups and fixlets

 A rework of buffer registration from Lars - a precursor to some other
 upcoming new stuff (a few patches from others rolled in here as well).
 * Ensure all drivers register the same channels for the device and buffer.
 * Move buffer registration into the core rather than using the old
   two step approach.  Now we have simple ways of using a unified set channels
   for both without requiring channels be exposed by both interface, this
   removes a fair bit of boilerplate.
 * Stop sca3000 and ad5933 (both in staging) enabling buffer channels by
   default. It has long be convention in IIO to startup with no channels
   enabled and leave it up to userspace to say what goes in the buffer.
   Getting rid of these allows us to drop export of iio_scan_mask_set.
 * Drop get_bytes_per_datum from iio_buffer_access_funcs as not been used
   for a while.
 * Allocate standard buffer attributes in the core rather than in every
   driver with a buffer.
 * Make the length attribute read only when a driver is not able to set
   the length.
 * Drop the get_length callback for buffers as it is already available in
   struct iio_buffer.
 * Drop an unused arguement form iio_kfifo_allocate and add devm allocator
   for it.
 * some kconfig entries gain anotation with the resulting module name.
 * Fix a resulting compile issue in dummy driver due to a stub taking
   wrong parameters as a result of the above rework.
 * Fix an off by 2 error in copying the core assigned buffer attributes.

Other cleanups,
 * Trivial space before comma fixups.
 * ak8975 fixlets - none critical.  Rework to allow more device support.
 * Drop unnecessary sizeof(u8) calls.
 * bmp280 - refactor the compensation code to reduce copy operations and
   code length.  A second patch futher optimized this and performed some
   other minor cleanups.
 * kxcjk-1013 - various power control cleanups to avoid unnecessary enable
   / disable of device.  Make sure it is only controlled at all if CONFIG_PM
   is enabled.  Also som cleanups of error paths.
 * Small cleanups in adf4530 driver - pointless message and unnecessary braces.
 * Clarifiy the proximity ABI docs to make it clear it should get bigger
   as we move futher away.
 * Drop a misleading comment form industrialio-core.c
 * Trivial white space cleanups.
 * sca3000 looses an unused debug function.
 * Fix char unsigned ordering in ad8366
 * Increase the sleep time in ad9523 to make it predictable (value didn't
   really matter so make it more than 20 msecs)
 * mxs-lradc touchscreen property cleanups in device tree are fixed to ensure
   the meet all the 'interesting' documentation.
 * A couple of cleanups for the staging ad5933 driver to avoid unnecessary
   conversion to a processed temperature vlaue in kernel and remove
   platform data form the state structure as not needed after probe.
 * Fix a wrong scale factor in the docs.

Misc
 * Add IIO include files to the maintainers entry.

63 files changed, 5313 insertions, 1115 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 117521dbf2b3..831db8623e4b 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -92,6 +92,18 @@ Description:
 		is required is a consistent labeling.  Units after application
 		of scale and offset are millivolts.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_supply_raw
+KernelVersion:	3.17
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled no bias removal etc.) current measurement from
+		channel Y. In special cases where the channel does not
+		correspond to externally available input one of the named
+		versions may be used. The number must always be specified and
+		unique to allow association with event codes. Units after
+		application of scale and offset are milliamps.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw
 KernelVersion:	3.2
 Contact:	linux-iio@vger.kernel.org
@@ -234,6 +246,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_current_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_tempY_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_offset
@@ -262,6 +276,9 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_supply_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_current_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
@@ -323,6 +340,14 @@ Description:
 		production inaccuracies).  If shared across all channels,
 		<type>_calibscale is used.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_steps_calibheight
+KernelVersion:	3.19
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Height of the user (in centimeters) used by some pedometers
+		to compute the stride length, distance, speed and activity
+		type.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
 What:		/sys/.../iio:deviceX/in_voltageX_scale_available
 What:		/sys/.../iio:deviceX/in_voltage-voltage_scale_available
@@ -790,6 +815,40 @@ Description:
 		met before an event is generated. If direction is not
 		specified then this period applies to both directions.
 
+What:		/sys/.../events/in_activity_still_thresh_rising_en
+What:		/sys/.../events/in_activity_still_thresh_falling_en
+What:		/sys/.../events/in_activity_walking_thresh_rising_en
+What:		/sys/.../events/in_activity_walking_thresh_falling_en
+What:		/sys/.../events/in_activity_jogging_thresh_rising_en
+What:		/sys/.../events/in_activity_jogging_thresh_falling_en
+What:		/sys/.../events/in_activity_running_thresh_rising_en
+What:		/sys/.../events/in_activity_running_thresh_falling_en
+KernelVersion:	3.19
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Enables or disables activitity events. Depending on direction
+		an event is generated when sensor ENTERS or LEAVES a given state.
+
+What:		/sys/.../events/in_activity_still_thresh_rising_value
+What:		/sys/.../events/in_activity_still_thresh_falling_value
+What:		/sys/.../events/in_activity_walking_thresh_rising_value
+What:		/sys/.../events/in_activity_walking_thresh_falling_value
+What:		/sys/.../events/in_activity_jogging_thresh_rising_value
+What:		/sys/.../events/in_activity_jogging_thresh_falling_value
+What:		/sys/.../events/in_activity_running_thresh_rising_value
+What:		/sys/.../events/in_activity_running_thresh_falling_value
+KernelVersion:	3.19
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Confidence value (in units as percentage) to be used
+		for deciding when an event should be generated. E.g for
+		running: If the confidence value reported by the sensor
+		is greater than in_activity_running_thresh_rising_value
+		then the sensor ENTERS running state. Conversely, if the
+		confidence value reported by the sensor is lower than
+		in_activity_running_thresh_falling_value then the sensor
+		is LEAVING running state.
+
 What:		/sys/.../iio:deviceX/events/in_accel_mag_en
 What:		/sys/.../iio:deviceX/events/in_accel_mag_rising_en
 What:		/sys/.../iio:deviceX/events/in_accel_mag_falling_en
@@ -822,6 +881,13 @@ Description:
 		number or direction is not specified, applies to all channels of
 		this type.
 
+What:		/sys/.../events/in_steps_instance_en
+KernelVersion:	3.19
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Enables or disables step detection. Each time the user takes a step an
+		event of this type will be generated.
+
 What:		/sys/bus/iio/devices/iio:deviceX/trigger/current_trigger
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
@@ -956,6 +1022,16 @@ Description:
 		and the relevant _type attributes to establish the data storage
 		format.
 
+What:		/sys/.../iio:deviceX/in_activity_still_input
+What:		/sys/.../iio:deviceX/in_activity_walking_input
+What:		/sys/.../iio:deviceX/in_activity_jogging_input
+What:		/sys/.../iio:deviceX/in_activity_running_input
+KernelVersion:	3.19
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is used to read the confidence for an activity
+		expressed in units as percentage.
+
 What:		/sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
@@ -992,7 +1068,9 @@ Description:
 		reflectivity of infrared or ultrasound emitted.
 		Often these sensors are unit less and as such conversion
 		to SI units is not possible.  Where it is, the units should
-		be meters.
+		be meters.  If such a conversion is not possible, the reported
+		values should behave in the same way as a distance, i.e. lower
+		values indicate something is closer to the sensor.
 
 What:		/sys/.../iio:deviceX/in_illuminanceY_input
 What:		/sys/.../iio:deviceX/in_illuminanceY_raw
@@ -1051,3 +1129,18 @@ Description:
 		after application of scale and offset. If no offset or scale is
 		present, output should be considered as processed with the
 		unit in milliamps.
+
+What:		/sys/.../iio:deviceX/in_steps_en
+KernelVersion:	3.19
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Activates the step counter. After activation, the number of steps
+		taken by the user will be counted in hardware and exported through
+		in_steps_input.
+
+What:		/sys/.../iio:deviceX/in_steps_input
+KernelVersion:	3.19
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is used to read the number of steps taken by the user
+		since the last reboot while activated.
diff --git a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt
index ee05dc390694..307537787574 100644
--- a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt
+++ b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt
@@ -12,9 +12,9 @@ Optional properties:
                                property is not present, then the touchscreen is
                                disabled. 5 wires is valid for i.MX28 SoC only.
 - fsl,ave-ctrl: number of samples per direction to calculate an average value.
-                Allowed value is 1 ... 31, default is 4
+                Allowed value is 1 ... 32, default is 4
 - fsl,ave-delay: delay between consecutive samples. Allowed value is
-                 1 ... 2047. It is used if 'fsl,ave-ctrl' > 1, counts at
+                 2 ... 2048. It is used if 'fsl,ave-ctrl' > 1, counts at
                  2 kHz and its default is 2 (= 1 ms)
 - fsl,settling: delay between plate switch to next sample. Allowed value is
                 1 ... 2047. It counts at 2 kHz and its default is
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index b5ab416cd53a..6d1e8eeb5990 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -258,6 +258,8 @@ IIO
   devm_iio_device_free()
   devm_iio_device_register()
   devm_iio_device_unregister()
+  devm_iio_kfifo_allocate()
+  devm_iio_kfifo_free()
   devm_iio_trigger_alloc()
   devm_iio_trigger_free()
 
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 9b9be8725e9d..9f67c10291bd 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -43,6 +43,9 @@ config HID_SENSOR_ACCEL_3D
 	  Say yes here to build support for the HID SENSOR
 	  accelerometers 3D.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called hid-sensor-accel-3d.
+
 config IIO_ST_ACCEL_3AXIS
 	tristate "STMicroelectronics accelerometers 3-Axis Driver"
 	depends on (I2C || SPI_MASTER) && SYSFS
@@ -80,6 +83,9 @@ config KXSD9
 	  Say yes here to build support for the Kionix KXSD9 accelerometer.
 	  Currently this only supports the device via an SPI interface.
 
+	  To compile this driver as a module, choose M here: the module
+	  will be called kxsd9.
+
 config MMA8452
 	tristate "Freescale MMA8452Q Accelerometer Driver"
 	depends on I2C
@@ -105,4 +111,14 @@ config KXCJK1013
 	  To compile this driver as a module, choose M here: the module will
 	  be called kxcjk-1013.
 
+config MMA9551
+	tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver"
+	depends on I2C
+	help
+	  Say yes here to build support for the Freescale MMA9551L
+	  Intelligent Motion-Sensing Platform Driver.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mma9551.
+
 endmenu
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index a593996c6539..de5b9cb9670f 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
 obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
 obj-$(CONFIG_KXSD9)	+= kxsd9.o
 obj-$(CONFIG_MMA8452)	+= mma8452.o
+obj-$(CONFIG_MMA9551)	+= mma9551.o
 
 obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o
 st_accel-y := st_accel_core.o
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index da2fe93739a2..567de269cc00 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -108,6 +108,7 @@ struct kxcjk1013_data {
 	bool motion_trigger_on;
 	int64_t timestamp;
 	enum kx_chipset chipset;
+	bool is_smo8500_device;
 };
 
 enum kxcjk1013_axis {
@@ -377,6 +378,7 @@ static int kxcjk1013_get_startup_times(struct kxcjk1013_data *data)
 
 static int kxcjk1013_set_power_state(struct kxcjk1013_data *data, bool on)
 {
+#ifdef CONFIG_PM
 	int ret;
 
 	if (on)
@@ -388,8 +390,11 @@ static int kxcjk1013_set_power_state(struct kxcjk1013_data *data, bool on)
 	if (ret < 0) {
 		dev_err(&data->client->dev,
 			"Failed: kxcjk1013_set_power_state for %d\n", on);
+		if (on)
+			pm_runtime_put_noidle(&data->client->dev);
 		return ret;
 	}
+#endif
 
 	return 0;
 }
@@ -858,6 +863,8 @@ static int kxcjk1013_write_event_config(struct iio_dev *indio_dev,
 
 	ret =  kxcjk1013_setup_any_motion_interrupt(data, state);
 	if (ret < 0) {
+		kxcjk1013_set_power_state(data, false);
+		data->ev_enable_state = 0;
 		mutex_unlock(&data->mutex);
 		return ret;
 	}
@@ -1008,6 +1015,7 @@ static int kxcjk1013_data_rdy_trigger_set_state(struct iio_trigger *trig,
 	else
 		ret = kxcjk1013_setup_new_data_interrupt(data, state);
 	if (ret < 0) {
+		kxcjk1013_set_power_state(data, false);
 		mutex_unlock(&data->mutex);
 		return ret;
 	}
@@ -1131,12 +1139,16 @@ static irqreturn_t kxcjk1013_data_rdy_trig_poll(int irq, void *private)
 }
 
 static const char *kxcjk1013_match_acpi_device(struct device *dev,
-					       enum kx_chipset *chipset)
+					       enum kx_chipset *chipset,
+					       bool *is_smo8500_device)
 {
 	const struct acpi_device_id *id;
+
 	id = acpi_match_device(dev->driver->acpi_match_table, dev);
 	if (!id)
 		return NULL;
+	if (strcmp(id->id, "SMO8500") == 0)
+		*is_smo8500_device = true;
 	*chipset = (enum kx_chipset)id->driver_data;
 
 	return dev_name(dev);
@@ -1151,6 +1163,8 @@ static int kxcjk1013_gpio_probe(struct i2c_client *client,
 
 	if (!client)
 		return -EINVAL;
+	if (data->is_smo8500_device)
+		return -ENOTSUPP;
 
 	dev = &client->dev;
 
@@ -1200,7 +1214,8 @@ static int kxcjk1013_probe(struct i2c_client *client,
 		name = id->name;
 	} else if (ACPI_HANDLE(&client->dev)) {
 		name = kxcjk1013_match_acpi_device(&client->dev,
-						   &data->chipset);
+						   &data->chipset,
+						   &data->is_smo8500_device);
 	} else
 		return -ENODEV;
 
@@ -1228,21 +1243,25 @@ static int kxcjk1013_probe(struct i2c_client *client,
 						KXCJK1013_IRQ_NAME,
 						indio_dev);
 		if (ret)
-			return ret;
+			goto err_poweroff;
 
 		data->dready_trig = devm_iio_trigger_alloc(&client->dev,
 							   "%s-dev%d",
 							   indio_dev->name,
 							   indio_dev->id);
-		if (!data->dready_trig)
-			return -ENOMEM;
+		if (!data->dready_trig) {
+			ret = -ENOMEM;
+			goto err_poweroff;
+		}
 
 		data->motion_trig = devm_iio_trigger_alloc(&client->dev,
 							  "%s-any-motion-dev%d",
 							  indio_dev->name,
 							  indio_dev->id);
-		if (!data->motion_trig)
-			return -ENOMEM;
+		if (!data->motion_trig) {
+			ret = -ENOMEM;
+			goto err_poweroff;
+		}
 
 		data->dready_trig->dev.parent = &client->dev;
 		data->dready_trig->ops = &kxcjk1013_trigger_ops;
@@ -1251,7 +1270,7 @@ static int kxcjk1013_probe(struct i2c_client *client,
 		iio_trigger_get(indio_dev->trig);
 		ret = iio_trigger_register(data->dready_trig);
 		if (ret)
-			return ret;
+			goto err_poweroff;
 
 		data->motion_trig->dev.parent = &client->dev;
 		data->motion_trig->ops = &kxcjk1013_trigger_ops;
@@ -1300,6 +1319,8 @@ err_trigger_unregister:
 		iio_trigger_unregister(data->dready_trig);
 	if (data->motion_trig)
 		iio_trigger_unregister(data->motion_trig);
+err_poweroff:
+	kxcjk1013_set_mode(data, STANDBY);
 
 	return ret;
 }
@@ -1349,10 +1370,7 @@ static int kxcjk1013_resume(struct device *dev)
 	int ret = 0;
 
 	mutex_lock(&data->mutex);
-	/* Check, if the suspend occured while active */
-	if (data->dready_trigger_on || data->motion_trigger_on ||
-							data->ev_enable_state)
-		ret = kxcjk1013_set_mode(data, OPERATION);
+	ret = kxcjk1013_set_mode(data, OPERATION);
 	mutex_unlock(&data->mutex);
 
 	return ret;
@@ -1364,8 +1382,14 @@ static int kxcjk1013_runtime_suspend(struct device *dev)
 {
 	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
 	struct kxcjk1013_data *data = iio_priv(indio_dev);
+	int ret;
 
-	return kxcjk1013_set_mode(data, STANDBY);
+	ret = kxcjk1013_set_mode(data, STANDBY);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "powering off device failed\n");
+		return -EAGAIN;
+	}
+	return 0;
 }
 
 static int kxcjk1013_runtime_resume(struct device *dev)
@@ -1399,6 +1423,7 @@ static const struct acpi_device_id kx_acpi_match[] = {
 	{"KXCJ1013", KXCJK1013},
 	{"KXCJ1008", KXCJ91008},
 	{"KXTJ1009", KXTJ21009},
+	{"SMO8500",  KXCJ91008},
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, kx_acpi_match);
@@ -1407,6 +1432,7 @@ static const struct i2c_device_id kxcjk1013_id[] = {
 	{"kxcjk1013", KXCJK1013},
 	{"kxcj91008", KXCJ91008},
 	{"kxtj21009", KXTJ21009},
+	{"SMO8500",   KXCJ91008},
 	{}
 };
 
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 3c12d4966376..5b80657883bb 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -111,7 +111,7 @@ static const int mma8452_samp_freq[8][2] = {
 	{6, 250000}, {1, 560000}
 };
 
-/* 
+/*
  * Hardware has fullscale of -2G, -4G, -8G corresponding to raw value -2048
  * The userspace interface uses m/s^2 and we declare micro units
  * So scale factor is given by:
diff --git a/drivers/iio/accel/mma9551.c b/drivers/iio/accel/mma9551.c
new file mode 100644
index 000000000000..6563e267b8ae
--- /dev/null
+++ b/drivers/iio/accel/mma9551.c
@@ -0,0 +1,956 @@
+/*
+ * Freescale MMA9551L Intelligent Motion-Sensing Platform driver
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+
+#define MMA9551_DRV_NAME		"mma9551"
+#define MMA9551_IRQ_NAME		"mma9551_event"
+#define MMA9551_GPIO_NAME		"mma9551_int"
+#define MMA9551_GPIO_COUNT		4
+
+/* Applications IDs */
+#define MMA9551_APPID_VERSION		0x00
+#define MMA9551_APPID_GPIO		0x03
+#define MMA9551_APPID_AFE		0x06
+#define MMA9551_APPID_TILT		0x0B
+#define MMA9551_APPID_SLEEP_WAKE	0x12
+#define MMA9551_APPID_RESET		0x17
+#define MMA9551_APPID_NONE		0xff
+
+/* Command masks for mailbox write command */
+#define MMA9551_CMD_READ_VERSION_INFO	0x00
+#define MMA9551_CMD_READ_CONFIG		0x10
+#define MMA9551_CMD_WRITE_CONFIG	0x20
+#define MMA9551_CMD_READ_STATUS		0x30
+
+enum mma9551_gpio_pin {
+	mma9551_gpio6 = 0,
+	mma9551_gpio7,
+	mma9551_gpio8,
+	mma9551_gpio9,
+	mma9551_gpio_max = mma9551_gpio9,
+};
+
+/* Mailbox read command */
+#define MMA9551_RESPONSE_COCO		BIT(7)
+
+/* Error-Status codes returned in mailbox read command */
+#define MMA9551_MCI_ERROR_NONE			0x00
+#define MMA9551_MCI_ERROR_PARAM			0x04
+#define MMA9551_MCI_INVALID_COUNT		0x19
+#define MMA9551_MCI_ERROR_COMMAND		0x1C
+#define MMA9551_MCI_ERROR_INVALID_LENGTH	0x21
+#define MMA9551_MCI_ERROR_FIFO_BUSY		0x22
+#define MMA9551_MCI_ERROR_FIFO_ALLOCATED	0x23
+#define MMA9551_MCI_ERROR_FIFO_OVERSIZE		0x24
+
+/* GPIO Application */
+#define MMA9551_GPIO_POL_MSB		0x08
+#define MMA9551_GPIO_POL_LSB		0x09
+
+/* Sleep/Wake application */
+#define MMA9551_SLEEP_CFG		0x06
+#define MMA9551_SLEEP_CFG_SNCEN		BIT(0)
+#define MMA9551_SLEEP_CFG_SCHEN		BIT(2)
+
+/* AFE application */
+#define MMA9551_AFE_X_ACCEL_REG		0x00
+#define MMA9551_AFE_Y_ACCEL_REG		0x02
+#define MMA9551_AFE_Z_ACCEL_REG		0x04
+
+/* Tilt application (inclination in IIO terms). */
+#define MMA9551_TILT_XZ_ANG_REG		0x00
+#define MMA9551_TILT_YZ_ANG_REG		0x01
+#define MMA9551_TILT_XY_ANG_REG		0x02
+#define MMA9551_TILT_ANGFLG		BIT(7)
+#define MMA9551_TILT_QUAD_REG		0x03
+#define MMA9551_TILT_XY_QUAD_SHIFT	0
+#define MMA9551_TILT_YZ_QUAD_SHIFT	2
+#define MMA9551_TILT_XZ_QUAD_SHIFT	4
+#define MMA9551_TILT_CFG_REG		0x01
+#define MMA9551_TILT_ANG_THRESH_MASK	GENMASK(3, 0)
+
+/* Tilt events are mapped to the first three GPIO pins. */
+enum mma9551_tilt_axis {
+	mma9551_x = 0,
+	mma9551_y,
+	mma9551_z,
+};
+
+/*
+ * A response is composed of:
+ * - control registers: MB0-3
+ * - data registers: MB4-31
+ *
+ * A request is composed of:
+ * - mbox to write to (always 0)
+ * - control registers: MB1-4
+ * - data registers: MB5-31
+ */
+#define MMA9551_MAILBOX_CTRL_REGS	4
+#define MMA9551_MAX_MAILBOX_DATA_REGS	28
+#define MMA9551_MAILBOX_REGS		32
+
+#define MMA9551_I2C_READ_RETRIES	5
+#define MMA9551_I2C_READ_DELAY	50	/* us */
+
+struct mma9551_mbox_request {
+	u8 start_mbox;		/* Always 0. */
+	u8 app_id;
+	/*
+	 * See Section 5.3.1 of the MMA955xL Software Reference Manual.
+	 *
+	 * Bit 7: reserved, always 0
+	 * Bits 6-4: command
+	 * Bits 3-0: upper bits of register offset
+	 */
+	u8 cmd_off;
+	u8 lower_off;
+	u8 nbytes;
+	u8 buf[MMA9551_MAX_MAILBOX_DATA_REGS - 1];
+} __packed;
+
+struct mma9551_mbox_response {
+	u8 app_id;
+	/*
+	 * See Section 5.3.3 of the MMA955xL Software Reference Manual.
+	 *
+	 * Bit 7: COCO
+	 * Bits 6-0: Error code.
+	 */
+	u8 coco_err;
+	u8 nbytes;
+	u8 req_bytes;
+	u8 buf[MMA9551_MAX_MAILBOX_DATA_REGS];
+} __packed;
+
+struct mma9551_version_info {
+	__be32 device_id;
+	u8 rom_version[2];
+	u8 fw_version[2];
+	u8 hw_version[2];
+	u8 fw_build[2];
+};
+
+struct mma9551_data {
+	struct i2c_client *client;
+	struct mutex mutex;
+	int event_enabled[3];
+	int irqs[MMA9551_GPIO_COUNT];
+};
+
+static int mma9551_transfer(struct i2c_client *client,
+			    u8 app_id, u8 command, u16 offset,
+			    u8 *inbytes, int num_inbytes,
+			    u8 *outbytes, int num_outbytes)
+{
+	struct mma9551_mbox_request req;
+	struct mma9551_mbox_response rsp;
+	struct i2c_msg in, out;
+	u8 req_len, err_code;
+	int ret, retries;
+
+	if (offset >= 1 << 12) {
+		dev_err(&client->dev, "register offset too large\n");
+		return -EINVAL;
+	}
+
+	req_len = 1 + MMA9551_MAILBOX_CTRL_REGS + num_inbytes;
+	req.start_mbox = 0;
+	req.app_id = app_id;
+	req.cmd_off = command | (offset >> 8);
+	req.lower_off = offset;
+
+	if (command == MMA9551_CMD_WRITE_CONFIG)
+		req.nbytes = num_inbytes;
+	else
+		req.nbytes = num_outbytes;
+	if (num_inbytes)
+		memcpy(req.buf, inbytes, num_inbytes);
+
+	out.addr = client->addr;
+	out.flags = 0;
+	out.len = req_len;
+	out.buf = (u8 *)&req;
+
+	ret = i2c_transfer(client->adapter, &out, 1);
+	if (ret < 0) {
+		dev_err(&client->dev, "i2c write failed\n");
+		return ret;
+	}
+
+	retries = MMA9551_I2C_READ_RETRIES;
+	do {
+		udelay(MMA9551_I2C_READ_DELAY);
+
+		in.addr = client->addr;
+		in.flags = I2C_M_RD;
+		in.len = sizeof(rsp);
+		in.buf = (u8 *)&rsp;
+
+		ret = i2c_transfer(client->adapter, &in, 1);
+		if (ret < 0) {
+			dev_err(&client->dev, "i2c read failed\n");
+			return ret;
+		}
+
+		if (rsp.coco_err & MMA9551_RESPONSE_COCO)
+			break;
+	} while (--retries > 0);
+
+	if (retries == 0) {
+		dev_err(&client->dev,
+			"timed out while waiting for command response\n");
+		return -ETIMEDOUT;
+	}
+
+	if (rsp.app_id != app_id) {
+		dev_err(&client->dev,
+			"app_id mismatch in response got %02x expected %02x\n",
+			rsp.app_id, app_id);
+		return -EINVAL;
+	}
+
+	err_code = rsp.coco_err & ~MMA9551_RESPONSE_COCO;
+	if (err_code != MMA9551_MCI_ERROR_NONE) {
+		dev_err(&client->dev, "read returned error %x\n", err_code);
+		return -EINVAL;
+	}
+
+	if (rsp.nbytes != rsp.req_bytes) {
+		dev_err(&client->dev,
+			"output length mismatch got %d expected %d\n",
+			rsp.nbytes, rsp.req_bytes);
+		return -EINVAL;
+	}
+
+	if (num_outbytes)
+		memcpy(outbytes, rsp.buf, num_outbytes);
+
+	return 0;
+}
+
+static int mma9551_read_config_byte(struct i2c_client *client, u8 app_id,
+				    u16 reg, u8 *val)
+{
+	return mma9551_transfer(client, app_id, MMA9551_CMD_READ_CONFIG,
+				reg, NULL, 0, val, 1);
+}
+
+static int mma9551_write_config_byte(struct i2c_client *client, u8 app_id,
+				     u16 reg, u8 val)
+{
+	return mma9551_transfer(client, app_id, MMA9551_CMD_WRITE_CONFIG, reg,
+				&val, 1, NULL, 0);
+}
+
+static int mma9551_read_status_byte(struct i2c_client *client, u8 app_id,
+				    u16 reg, u8 *val)
+{
+	return mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS,
+				reg, NULL, 0, val, 1);
+}
+
+static int mma9551_read_status_word(struct i2c_client *client, u8 app_id,
+				    u16 reg, u16 *val)
+{
+	int ret;
+	__be16 v;
+
+	ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS,
+			       reg, NULL, 0, (u8 *)&v, 2);
+	*val = be16_to_cpu(v);
+
+	return ret;
+}
+
+static int mma9551_update_config_bits(struct i2c_client *client, u8 app_id,
+				      u16 reg, u8 mask, u8 val)
+{
+	int ret;
+	u8 tmp, orig;
+
+	ret = mma9551_read_config_byte(client, app_id, reg, &orig);
+	if (ret < 0)
+		return ret;
+
+	tmp = orig & ~mask;
+	tmp |= val & mask;
+
+	if (tmp == orig)
+		return 0;
+
+	return mma9551_write_config_byte(client, app_id, reg, tmp);
+}
+
+/*
+ * The polarity parameter is described in section 6.2.2, page 66, of the
+ * Software Reference Manual.  Basically, polarity=0 means the interrupt
+ * line has the same value as the selected bit, while polarity=1 means
+ * the line is inverted.
+ */
+static int mma9551_gpio_config(struct i2c_client *client,
+			       enum mma9551_gpio_pin pin,
+			       u8 app_id, u8 bitnum, int polarity)
+{
+	u8 reg, pol_mask, pol_val;
+	int ret;
+
+	if (pin > mma9551_gpio_max) {
+		dev_err(&client->dev, "bad GPIO pin\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Pin 6 is configured by regs 0x00 and 0x01, pin 7 by 0x02 and
+	 * 0x03, and so on.
+	 */
+	reg = pin * 2;
+
+	ret = mma9551_write_config_byte(client, MMA9551_APPID_GPIO,
+					reg, app_id);
+	if (ret < 0) {
+		dev_err(&client->dev, "error setting GPIO app_id\n");
+		return ret;
+	}
+
+	ret = mma9551_write_config_byte(client, MMA9551_APPID_GPIO,
+					reg + 1, bitnum);
+	if (ret < 0) {
+		dev_err(&client->dev, "error setting GPIO bit number\n");
+		return ret;
+	}
+
+	switch (pin) {
+	case mma9551_gpio6:
+		reg = MMA9551_GPIO_POL_LSB;
+		pol_mask = 1 << 6;
+		break;
+	case mma9551_gpio7:
+		reg = MMA9551_GPIO_POL_LSB;
+		pol_mask = 1 << 7;
+		break;
+	case mma9551_gpio8:
+		reg = MMA9551_GPIO_POL_MSB;
+		pol_mask = 1 << 0;
+		break;
+	case mma9551_gpio9:
+		reg = MMA9551_GPIO_POL_MSB;
+		pol_mask = 1 << 1;
+		break;
+	}
+	pol_val = polarity ? pol_mask : 0;
+
+	ret = mma9551_update_config_bits(client, MMA9551_APPID_GPIO, reg,
+					 pol_mask, pol_val);
+	if (ret < 0)
+		dev_err(&client->dev, "error setting GPIO polarity\n");
+
+	return ret;
+}
+
+static int mma9551_read_version(struct i2c_client *client)
+{
+	struct mma9551_version_info info;
+	int ret;
+
+	ret = mma9551_transfer(client, MMA9551_APPID_VERSION, 0x00, 0x00,
+			       NULL, 0, (u8 *)&info, sizeof(info));
+	if (ret < 0)
+		return ret;
+
+	dev_info(&client->dev, "Device ID 0x%x, firmware version %02x.%02x\n",
+		 be32_to_cpu(info.device_id), info.fw_version[0],
+		 info.fw_version[1]);
+
+	return 0;
+}
+
+/*
+ * Use 'false' as the second parameter to cause the device to enter
+ * sleep.
+ */
+static int mma9551_set_device_state(struct i2c_client *client,
+				    bool enable)
+{
+	return mma9551_update_config_bits(client, MMA9551_APPID_SLEEP_WAKE,
+					  MMA9551_SLEEP_CFG,
+					  MMA9551_SLEEP_CFG_SNCEN,
+					  enable ? 0 : MMA9551_SLEEP_CFG_SNCEN);
+}
+
+static int mma9551_read_incli_chan(struct i2c_client *client,
+				   const struct iio_chan_spec *chan,
+				   int *val)
+{
+	u8 quad_shift, angle, quadrant;
+	u16 reg_addr;
+	int ret;
+
+	switch (chan->channel2) {
+	case IIO_MOD_X:
+		reg_addr = MMA9551_TILT_YZ_ANG_REG;
+		quad_shift = MMA9551_TILT_YZ_QUAD_SHIFT;
+		break;
+	case IIO_MOD_Y:
+		reg_addr = MMA9551_TILT_XZ_ANG_REG;
+		quad_shift = MMA9551_TILT_XZ_QUAD_SHIFT;
+		break;
+	case IIO_MOD_Z:
+		reg_addr = MMA9551_TILT_XY_ANG_REG;
+		quad_shift = MMA9551_TILT_XY_QUAD_SHIFT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = mma9551_read_status_byte(client, MMA9551_APPID_TILT,
+				       reg_addr, &angle);
+	if (ret < 0)
+		return ret;
+
+	ret = mma9551_read_status_byte(client, MMA9551_APPID_TILT,
+				       MMA9551_TILT_QUAD_REG, &quadrant);
+	if (ret < 0)
+		return ret;
+
+	angle &= ~MMA9551_TILT_ANGFLG;
+	quadrant = (quadrant >> quad_shift) & 0x03;
+
+	if (quadrant == 1 || quadrant == 3)
+		*val = 90 * (quadrant + 1) - angle;
+	else
+		*val = angle + 90 * quadrant;
+
+	return IIO_VAL_INT;
+}
+
+static int mma9551_read_accel_chan(struct i2c_client *client,
+				   const struct iio_chan_spec *chan,
+				   int *val, int *val2)
+{
+	u16 reg_addr;
+	s16 raw_accel;
+	int ret;
+
+	switch (chan->channel2) {
+	case IIO_MOD_X:
+		reg_addr = MMA9551_AFE_X_ACCEL_REG;
+		break;
+	case IIO_MOD_Y:
+		reg_addr = MMA9551_AFE_Y_ACCEL_REG;
+		break;
+	case IIO_MOD_Z:
+		reg_addr = MMA9551_AFE_Z_ACCEL_REG;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = mma9551_read_status_word(client, MMA9551_APPID_AFE,
+				       reg_addr, &raw_accel);
+	if (ret < 0)
+		return ret;
+
+	*val = raw_accel;
+
+	return IIO_VAL_INT;
+}
+
+static int mma9551_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct mma9551_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_INCLI:
+			mutex_lock(&data->mutex);
+			ret = mma9551_read_incli_chan(data->client, chan, val);
+			mutex_unlock(&data->mutex);
+			return ret;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_ACCEL:
+			mutex_lock(&data->mutex);
+			ret = mma9551_read_accel_chan(data->client,
+						      chan, val, val2);
+			mutex_unlock(&data->mutex);
+			return ret;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ACCEL:
+			*val = 0;
+			*val2 = 2440;
+			return IIO_VAL_INT_PLUS_MICRO;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mma9551_read_event_config(struct iio_dev *indio_dev,
+				     const struct iio_chan_spec *chan,
+				     enum iio_event_type type,
+				     enum iio_event_direction dir)
+{
+	struct mma9551_data *data = iio_priv(indio_dev);
+
+	switch (chan->type) {
+	case IIO_INCLI:
+		/* IIO counts axes from 1, because IIO_NO_MOD is 0. */
+		return data->event_enabled[chan->channel2 - 1];
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mma9551_config_incli_event(struct iio_dev *indio_dev,
+				      enum iio_modifier axis,
+				      int state)
+{
+	struct mma9551_data *data = iio_priv(indio_dev);
+	enum mma9551_tilt_axis mma_axis;
+	int ret;
+
+	/* IIO counts axes from 1, because IIO_NO_MOD is 0. */
+	mma_axis = axis - 1;
+
+	if (data->event_enabled[mma_axis] == state)
+		return 0;
+
+	if (state == 0) {
+		ret = mma9551_gpio_config(data->client,
+					  (enum mma9551_gpio_pin)mma_axis,
+					  MMA9551_APPID_NONE, 0, 0);
+		if (ret < 0)
+			return ret;
+	} else {
+		int bitnum;
+
+		/* Bit 7 of each angle register holds the angle flag. */
+		switch (axis) {
+		case IIO_MOD_X:
+			bitnum = 7 + 8 * MMA9551_TILT_YZ_ANG_REG;
+			break;
+		case IIO_MOD_Y:
+			bitnum = 7 + 8 * MMA9551_TILT_XZ_ANG_REG;
+			break;
+		case IIO_MOD_Z:
+			bitnum = 7 + 8 * MMA9551_TILT_XY_ANG_REG;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		ret = mma9551_gpio_config(data->client,
+					  (enum mma9551_gpio_pin)mma_axis,
+					  MMA9551_APPID_TILT, bitnum, 0);
+		if (ret < 0)
+			return ret;
+	}
+
+	data->event_enabled[mma_axis] = state;
+
+	return ret;
+}
+
+static int mma9551_write_event_config(struct iio_dev *indio_dev,
+				      const struct iio_chan_spec *chan,
+				      enum iio_event_type type,
+				      enum iio_event_direction dir,
+				      int state)
+{
+	struct mma9551_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (chan->type) {
+	case IIO_INCLI:
+		mutex_lock(&data->mutex);
+		ret = mma9551_config_incli_event(indio_dev,
+						 chan->channel2, state);
+		mutex_unlock(&data->mutex);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mma9551_write_event_value(struct iio_dev *indio_dev,
+				     const struct iio_chan_spec *chan,
+				     enum iio_event_type type,
+				     enum iio_event_direction dir,
+				     enum iio_event_info info,
+				     int val, int val2)
+{
+	struct mma9551_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (chan->type) {
+	case IIO_INCLI:
+		if (val2 != 0 || val < 1 || val > 10)
+			return -EINVAL;
+		mutex_lock(&data->mutex);
+		ret = mma9551_update_config_bits(data->client,
+						 MMA9551_APPID_TILT,
+						 MMA9551_TILT_CFG_REG,
+						 MMA9551_TILT_ANG_THRESH_MASK,
+						 val);
+		mutex_unlock(&data->mutex);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mma9551_read_event_value(struct iio_dev *indio_dev,
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir,
+				    enum iio_event_info info,
+				    int *val, int *val2)
+{
+	struct mma9551_data *data = iio_priv(indio_dev);
+	int ret;
+	u8 tmp;
+
+	switch (chan->type) {
+	case IIO_INCLI:
+		mutex_lock(&data->mutex);
+		ret = mma9551_read_config_byte(data->client,
+					       MMA9551_APPID_TILT,
+					       MMA9551_TILT_CFG_REG, &tmp);
+		mutex_unlock(&data->mutex);
+		if (ret < 0)
+			return ret;
+		*val = tmp & MMA9551_TILT_ANG_THRESH_MASK;
+		*val2 = 0;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_event_spec mma9551_incli_event = {
+	.type = IIO_EV_TYPE_ROC,
+	.dir = IIO_EV_DIR_RISING,
+	.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE),
+};
+
+#define MMA9551_ACCEL_CHANNEL(axis) {				\
+	.type = IIO_ACCEL,					\
+	.modified = 1,						\
+	.channel2 = axis,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+}
+
+#define MMA9551_INCLI_CHANNEL(axis) {				\
+	.type = IIO_INCLI,					\
+	.modified = 1,						\
+	.channel2 = axis,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),	\
+	.event_spec = &mma9551_incli_event,			\
+	.num_event_specs = 1,					\
+}
+
+static const struct iio_chan_spec mma9551_channels[] = {
+	MMA9551_ACCEL_CHANNEL(IIO_MOD_X),
+	MMA9551_ACCEL_CHANNEL(IIO_MOD_Y),
+	MMA9551_ACCEL_CHANNEL(IIO_MOD_Z),
+
+	MMA9551_INCLI_CHANNEL(IIO_MOD_X),
+	MMA9551_INCLI_CHANNEL(IIO_MOD_Y),
+	MMA9551_INCLI_CHANNEL(IIO_MOD_Z),
+};
+
+static const struct iio_info mma9551_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = mma9551_read_raw,
+	.read_event_config = mma9551_read_event_config,
+	.write_event_config = mma9551_write_event_config,
+	.read_event_value = mma9551_read_event_value,
+	.write_event_value = mma9551_write_event_value,
+};
+
+static irqreturn_t mma9551_event_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct mma9551_data *data = iio_priv(indio_dev);
+	int i, ret, mma_axis = -1;
+	u16 reg;
+	u8 val;
+
+	mutex_lock(&data->mutex);
+
+	for (i = 0; i < 3; i++)
+		if (irq == data->irqs[i]) {
+			mma_axis = i;
+			break;
+		}
+
+	if (mma_axis == -1) {
+		/* IRQ was triggered on 4th line, which we don't use. */
+		dev_warn(&data->client->dev,
+			 "irq triggered on unused line %d\n", data->irqs[3]);
+		goto out;
+	}
+
+	switch (mma_axis) {
+	case mma9551_x:
+		reg = MMA9551_TILT_YZ_ANG_REG;
+		break;
+	case mma9551_y:
+		reg = MMA9551_TILT_XZ_ANG_REG;
+		break;
+	case mma9551_z:
+		reg = MMA9551_TILT_XY_ANG_REG;
+		break;
+	}
+
+	/*
+	 * Read the angle even though we don't use it, otherwise we
+	 * won't get any further interrupts.
+	 */
+	ret = mma9551_read_status_byte(data->client, MMA9551_APPID_TILT,
+				       reg, &val);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"error %d reading tilt register in IRQ\n", ret);
+		goto out;
+	}
+
+	iio_push_event(indio_dev,
+		       IIO_MOD_EVENT_CODE(IIO_INCLI, 0, (mma_axis + 1),
+					  IIO_EV_TYPE_ROC, IIO_EV_DIR_RISING),
+		       iio_get_time_ns());
+
+out:
+	mutex_unlock(&data->mutex);
+
+	return IRQ_HANDLED;
+}
+
+static int mma9551_init(struct mma9551_data *data)
+{
+	int ret;
+
+	ret = mma9551_read_version(data->client);
+	if (ret)
+		return ret;
+
+	/* Power on chip and enable doze mode. */
+	return mma9551_update_config_bits(data->client,
+			 MMA9551_APPID_SLEEP_WAKE,
+			 MMA9551_SLEEP_CFG,
+			 MMA9551_SLEEP_CFG_SCHEN | MMA9551_SLEEP_CFG_SNCEN,
+			 MMA9551_SLEEP_CFG_SCHEN);
+}
+
+static int mma9551_gpio_probe(struct iio_dev *indio_dev)
+{
+	struct gpio_desc *gpio;
+	int i, ret;
+	struct mma9551_data *data = iio_priv(indio_dev);
+	struct device *dev = &data->client->dev;
+
+	for (i = 0; i < MMA9551_GPIO_COUNT; i++) {
+		gpio = devm_gpiod_get_index(dev, MMA9551_GPIO_NAME, i);
+		if (IS_ERR(gpio)) {
+			dev_err(dev, "acpi gpio get index failed\n");
+			return PTR_ERR(gpio);
+		}
+
+		ret = gpiod_direction_input(gpio);
+		if (ret)
+			return ret;
+
+		data->irqs[i] = gpiod_to_irq(gpio);
+		ret = devm_request_threaded_irq(dev, data->irqs[i],
+				NULL, mma9551_event_handler,
+				IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				MMA9551_IRQ_NAME, indio_dev);
+		if (ret < 0) {
+			dev_err(dev, "request irq %d failed\n", data->irqs[i]);
+			return ret;
+		}
+
+		dev_dbg(dev, "gpio resource, no:%d irq:%d\n",
+			desc_to_gpio(gpio), data->irqs[i]);
+	}
+
+	return 0;
+}
+
+static const char *mma9551_match_acpi_device(struct device *dev)
+{
+	const struct acpi_device_id *id;
+
+	id = acpi_match_device(dev->driver->acpi_match_table, dev);
+	if (!id)
+		return NULL;
+
+	return dev_name(dev);
+}
+
+static int mma9551_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct mma9551_data *data;
+	struct iio_dev *indio_dev;
+	const char *name = NULL;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+
+	if (id)
+		name = id->name;
+	else if (ACPI_HANDLE(&client->dev))
+		name = mma9551_match_acpi_device(&client->dev);
+
+	ret = mma9551_init(data);
+	if (ret < 0)
+		return ret;
+
+	mutex_init(&data->mutex);
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->channels = mma9551_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mma9551_channels);
+	indio_dev->name = name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &mma9551_info;
+
+	ret = mma9551_gpio_probe(indio_dev);
+	if (ret < 0)
+		goto out_poweroff;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "unable to register iio device\n");
+		goto out_poweroff;
+	}
+
+	return 0;
+
+out_poweroff:
+	mma9551_set_device_state(client, false);
+
+	return ret;
+}
+
+static int mma9551_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct mma9551_data *data = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	mutex_lock(&data->mutex);
+	mma9551_set_device_state(data->client, false);
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mma9551_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct mma9551_data *data = iio_priv(indio_dev);
+
+	mutex_lock(&data->mutex);
+	mma9551_set_device_state(data->client, false);
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+static int mma9551_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct mma9551_data *data = iio_priv(indio_dev);
+
+	mutex_lock(&data->mutex);
+	mma9551_set_device_state(data->client, true);
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+#else
+#define mma9551_suspend NULL
+#define mma9551_resume NULL
+#endif
+
+static const struct dev_pm_ops mma9551_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(mma9551_suspend, mma9551_resume)
+};
+
+static const struct acpi_device_id mma9551_acpi_match[] = {
+	{"MMA9551", 0},
+	{},
+};
+
+MODULE_DEVICE_TABLE(acpi, mma9551_acpi_match);
+
+static const struct i2c_device_id mma9551_id[] = {
+	{"mma9551", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, mma9551_id);
+
+static struct i2c_driver mma9551_driver = {
+	.driver = {
+		   .name = MMA9551_DRV_NAME,
+		   .acpi_match_table = ACPI_PTR(mma9551_acpi_match),
+		   .pm = &mma9551_pm_ops,
+		   },
+	.probe = mma9551_probe,
+	.remove = mma9551_remove,
+	.id_table = mma9551_id,
+};
+
+module_i2c_driver(mma9551_driver);
+
+MODULE_AUTHOR("Irina Tirdea <irina.tirdea@intel.com>");
+MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MMA9551L motion-sensing platform driver");
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index b730864731e8..5eea299518a3 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -250,7 +250,7 @@ static int tiadc_iio_buffered_hardware_setup(struct iio_dev *indio_dev,
 	struct iio_buffer *buffer;
 	int ret;
 
-	buffer = iio_kfifo_allocate(indio_dev);
+	buffer = iio_kfifo_allocate();
 	if (!buffer)
 		return -ENOMEM;
 
@@ -264,16 +264,8 @@ static int tiadc_iio_buffered_hardware_setup(struct iio_dev *indio_dev,
 	indio_dev->setup_ops = setup_ops;
 	indio_dev->modes |= INDIO_BUFFER_HARDWARE;
 
-	ret = iio_buffer_register(indio_dev,
-				  indio_dev->channels,
-				  indio_dev->num_channels);
-	if (ret)
-		goto error_free_irq;
-
 	return 0;
 
-error_free_irq:
-	free_irq(irq, indio_dev);
 error_kfifo_free:
 	iio_kfifo_free(indio_dev->buffer);
 	return ret;
@@ -285,7 +277,6 @@ static void tiadc_iio_buffered_hardware_remove(struct iio_dev *indio_dev)
 
 	free_irq(adc_dev->mfd_tscadc->irq, indio_dev);
 	iio_kfifo_free(indio_dev->buffer);
-	iio_buffer_unregister(indio_dev);
 }
 
 
diff --git a/drivers/iio/amplifiers/ad8366.c b/drivers/iio/amplifiers/ad8366.c
index ba6f6a91dfff..c0d364ebaea8 100644
--- a/drivers/iio/amplifiers/ad8366.c
+++ b/drivers/iio/amplifiers/ad8366.c
@@ -31,7 +31,7 @@ struct ad8366_state {
 };
 
 static int ad8366_write(struct iio_dev *indio_dev,
-			unsigned char ch_a, char unsigned ch_b)
+			unsigned char ch_a, unsigned char ch_b)
 {
 	struct ad8366_state *st = iio_priv(indio_dev);
 	int ret;
@@ -166,7 +166,7 @@ static int ad8366_probe(struct spi_device *spi)
 	if (ret)
 		goto error_disable_reg;
 
-	ad8366_write(indio_dev, 0 , 0);
+	ad8366_write(indio_dev, 0, 0);
 
 	return 0;
 
diff --git a/drivers/iio/common/st_sensors/st_sensors_spi.c b/drivers/iio/common/st_sensors/st_sensors_spi.c
index 78a6a1ab3ece..5b377373f48d 100644
--- a/drivers/iio/common/st_sensors/st_sensors_spi.c
+++ b/drivers/iio/common/st_sensors/st_sensors_spi.c
@@ -54,7 +54,7 @@ static int st_sensors_spi_read(struct st_sensor_transfer_buffer *tb,
 	if (err)
 		goto acc_spi_read_error;
 
-	memcpy(data, tb->rx_buf, len*sizeof(u8));
+	memcpy(data, tb->rx_buf, len);
 	mutex_unlock(&tb->buf_lock);
 	return len;
 
diff --git a/drivers/iio/frequency/ad9523.c b/drivers/iio/frequency/ad9523.c
index 7c5245d9f99c..50ed8d1ca45a 100644
--- a/drivers/iio/frequency/ad9523.c
+++ b/drivers/iio/frequency/ad9523.c
@@ -445,7 +445,7 @@ static int ad9523_store_eeprom(struct iio_dev *indio_dev)
 
 	tmp = 4;
 	do {
-		msleep(16);
+		msleep(20);
 		ret = ad9523_read(indio_dev,
 				  AD9523_EEPROM_DATA_XFER_STATUS);
 		if (ret < 0)
diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c
index 63a25d9e1204..10a0dfc3b01f 100644
--- a/drivers/iio/frequency/adf4350.c
+++ b/drivers/iio/frequency/adf4350.c
@@ -387,10 +387,8 @@ static struct adf4350_platform_data *adf4350_parse_dt(struct device *dev)
 	int ret;
 
 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
-	if (!pdata) {
-		dev_err(dev, "could not allocate memory for platform data\n");
+	if (!pdata)
 		return NULL;
-	}
 
 	strncpy(&pdata->name[0], np->name, SPI_NAME_SIZE - 1);
 
@@ -613,9 +611,8 @@ static int adf4350_remove(struct spi_device *spi)
 	if (st->clk)
 		clk_disable_unprepare(st->clk);
 
-	if (!IS_ERR(reg)) {
+	if (!IS_ERR(reg))
 		regulator_disable(reg);
-	}
 
 	return 0;
 }
diff --git a/drivers/iio/iio_core.h b/drivers/iio/iio_core.h
index 5f0ea77fe717..359883525ab7 100644
--- a/drivers/iio/iio_core.h
+++ b/drivers/iio/iio_core.h
@@ -48,6 +48,8 @@ unsigned int iio_buffer_poll(struct file *filp,
 ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf,
 				      size_t n, loff_t *f_ps);
 
+int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev);
+void iio_buffer_free_sysfs_and_mask(struct iio_dev *indio_dev);
 
 #define iio_buffer_poll_addr (&iio_buffer_poll)
 #define iio_buffer_read_first_n_outer_addr (&iio_buffer_read_first_n_outer)
@@ -60,6 +62,13 @@ void iio_buffer_wakeup_poll(struct iio_dev *indio_dev);
 #define iio_buffer_poll_addr NULL
 #define iio_buffer_read_first_n_outer_addr NULL
 
+static inline int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+
+static inline void iio_buffer_free_sysfs_and_mask(struct iio_dev *indio_dev) {}
+
 static inline void iio_disable_all_buffers(struct iio_dev *indio_dev) {}
 static inline void iio_buffer_wakeup_poll(struct iio_dev *indio_dev) {}
 
diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
index 2b0e45133e9d..5e610f7de5aa 100644
--- a/drivers/iio/imu/Kconfig
+++ b/drivers/iio/imu/Kconfig
@@ -25,6 +25,17 @@ config ADIS16480
 	  Say yes here to build support for Analog Devices ADIS16375, ADIS16480,
 	  ADIS16485, ADIS16488 inertial sensors.
 
+config KMX61
+	tristate "Kionix KMX61 6-axis accelerometer and magnetometer"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here if you want to build a driver for Kionix KMX61 6-axis
+	  accelerometer and magnetometer.
+	  To compile this driver as module, choose M here: the module will
+	  be called kmx61.
+
 source "drivers/iio/imu/inv_mpu6050/Kconfig"
 
 endmenu
diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
index 114d2c17cbe2..e1e6e3d70e26 100644
--- a/drivers/iio/imu/Makefile
+++ b/drivers/iio/imu/Makefile
@@ -14,3 +14,5 @@ adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o
 obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o
 
 obj-y += inv_mpu6050/
+
+obj-$(CONFIG_KMX61) += kmx61.o
diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
index 2d0608ba88d7..48fbc0bc7e2a 100644
--- a/drivers/iio/imu/inv_mpu6050/Kconfig
+++ b/drivers/iio/imu/inv_mpu6050/Kconfig
@@ -7,6 +7,7 @@ config INV_MPU6050_IIO
 	depends on I2C && SYSFS
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
+	select I2C_MUX
 	help
 	  This driver supports the Invensense MPU6050 devices.
 	  This driver can also support MPU6500 in MPU6050 compatibility mode
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index b75519deac1a..f73e60b7a796 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -23,6 +23,8 @@
 #include <linux/kfifo.h>
 #include <linux/spinlock.h>
 #include <linux/iio/iio.h>
+#include <linux/i2c-mux.h>
+#include <linux/acpi.h>
 #include "inv_mpu_iio.h"
 
 /*
@@ -52,6 +54,7 @@ static const struct inv_mpu6050_reg_map reg_set_6050 = {
 	.int_enable             = INV_MPU6050_REG_INT_ENABLE,
 	.pwr_mgmt_1             = INV_MPU6050_REG_PWR_MGMT_1,
 	.pwr_mgmt_2             = INV_MPU6050_REG_PWR_MGMT_2,
+	.int_pin_cfg		= INV_MPU6050_REG_INT_PIN_CFG,
 };
 
 static const struct inv_mpu6050_chip_config chip_config_6050 = {
@@ -77,6 +80,83 @@ int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 d)
 	return i2c_smbus_write_i2c_block_data(st->client, reg, 1, &d);
 }
 
+/*
+ * The i2c read/write needs to happen in unlocked mode. As the parent
+ * adapter is common. If we use locked versions, it will fail as
+ * the mux adapter will lock the parent i2c adapter, while calling
+ * select/deselect functions.
+ */
+static int inv_mpu6050_write_reg_unlocked(struct inv_mpu6050_state *st,
+					  u8 reg, u8 d)
+{
+	int ret;
+	u8 buf[2];
+	struct i2c_msg msg[1] = {
+		{
+			.addr = st->client->addr,
+			.flags = 0,
+			.len = sizeof(buf),
+			.buf = buf,
+		}
+	};
+
+	buf[0] = reg;
+	buf[1] = d;
+	ret = __i2c_transfer(st->client->adapter, msg, 1);
+	if (ret != 1)
+		return ret;
+
+	return 0;
+}
+
+static int inv_mpu6050_select_bypass(struct i2c_adapter *adap, void *mux_priv,
+				     u32 chan_id)
+{
+	struct iio_dev *indio_dev = mux_priv;
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+	int ret = 0;
+
+	/* Use the same mutex which was used everywhere to protect power-op */
+	mutex_lock(&indio_dev->mlock);
+	if (!st->powerup_count) {
+		ret = inv_mpu6050_write_reg_unlocked(st, st->reg->pwr_mgmt_1,
+						     0);
+		if (ret)
+			goto write_error;
+
+		msleep(INV_MPU6050_REG_UP_TIME);
+	}
+	if (!ret) {
+		st->powerup_count++;
+		ret = inv_mpu6050_write_reg_unlocked(st, st->reg->int_pin_cfg,
+						     st->client->irq |
+						     INV_MPU6050_BIT_BYPASS_EN);
+	}
+write_error:
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+}
+
+static int inv_mpu6050_deselect_bypass(struct i2c_adapter *adap,
+				       void *mux_priv, u32 chan_id)
+{
+	struct iio_dev *indio_dev = mux_priv;
+	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+	mutex_lock(&indio_dev->mlock);
+	/* It doesn't really mattter, if any of the calls fails */
+	inv_mpu6050_write_reg_unlocked(st, st->reg->int_pin_cfg,
+				       st->client->irq);
+	st->powerup_count--;
+	if (!st->powerup_count)
+		inv_mpu6050_write_reg_unlocked(st, st->reg->pwr_mgmt_1,
+					       INV_MPU6050_BIT_SLEEP);
+	mutex_unlock(&indio_dev->mlock);
+
+	return 0;
+}
+
 int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
 {
 	u8 d, mgmt_1;
@@ -133,13 +213,22 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
 
 int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on)
 {
-	int result;
+	int result = 0;
+
+	if (power_on) {
+		/* Already under indio-dev->mlock mutex */
+		if (!st->powerup_count)
+			result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1,
+						       0);
+		if (!result)
+			st->powerup_count++;
+	} else {
+		st->powerup_count--;
+		if (!st->powerup_count)
+			result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1,
+						       INV_MPU6050_BIT_SLEEP);
+	}
 
-	if (power_on)
-		result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, 0);
-	else
-		result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1,
-						INV_MPU6050_BIT_SLEEP);
 	if (result)
 		return result;
 
@@ -673,6 +762,7 @@ static int inv_mpu_probe(struct i2c_client *client,
 
 	st = iio_priv(indio_dev);
 	st->client = client;
+	st->powerup_count = 0;
 	pdata = dev_get_platdata(&client->dev);
 	if (pdata)
 		st->plat_data = *pdata;
@@ -720,8 +810,21 @@ static int inv_mpu_probe(struct i2c_client *client,
 		goto out_remove_trigger;
 	}
 
+	st->mux_adapter = i2c_add_mux_adapter(client->adapter,
+					      &client->dev,
+					      indio_dev,
+					      0, 0, 0,
+					      inv_mpu6050_select_bypass,
+					      inv_mpu6050_deselect_bypass);
+	if (!st->mux_adapter) {
+		result = -ENODEV;
+		goto out_unreg_device;
+	}
+
 	return 0;
 
+out_unreg_device:
+	iio_device_unregister(indio_dev);
 out_remove_trigger:
 	inv_mpu6050_remove_trigger(st);
 out_unreg_ring:
@@ -734,6 +837,7 @@ static int inv_mpu_remove(struct i2c_client *client)
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	struct inv_mpu6050_state *st = iio_priv(indio_dev);
 
+	i2c_del_mux_adapter(st->mux_adapter);
 	iio_device_unregister(indio_dev);
 	inv_mpu6050_remove_trigger(st);
 	iio_triggered_buffer_cleanup(indio_dev);
@@ -772,6 +876,13 @@ static const struct i2c_device_id inv_mpu_id[] = {
 
 MODULE_DEVICE_TABLE(i2c, inv_mpu_id);
 
+static const struct acpi_device_id inv_acpi_match[] = {
+	{"INVN6500", 0},
+	{ },
+};
+
+MODULE_DEVICE_TABLE(acpi, inv_acpi_match);
+
 static struct i2c_driver inv_mpu_driver = {
 	.probe		=	inv_mpu_probe,
 	.remove		=	inv_mpu_remove,
@@ -780,6 +891,7 @@ static struct i2c_driver inv_mpu_driver = {
 		.owner	=	THIS_MODULE,
 		.name	=	"inv-mpu6050",
 		.pm     =       INV_MPU6050_PMOPS,
+		.acpi_match_table = ACPI_PTR(inv_acpi_match),
 	},
 };
 
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index e7799315d4dc..aa837de57079 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -54,6 +54,7 @@ struct inv_mpu6050_reg_map {
 	u8 int_enable;
 	u8 pwr_mgmt_1;
 	u8 pwr_mgmt_2;
+	u8 int_pin_cfg;
 };
 
 /*device enum */
@@ -119,6 +120,8 @@ struct inv_mpu6050_state {
 	enum   inv_devices chip_type;
 	spinlock_t time_stamp_lock;
 	struct i2c_client *client;
+	struct i2c_adapter *mux_adapter;
+	unsigned int powerup_count;
 	struct inv_mpu6050_platform_data plat_data;
 	DECLARE_KFIFO(timestamps, long long, TIMESTAMP_FIFO_SIZE);
 };
@@ -179,6 +182,9 @@ struct inv_mpu6050_state {
 /* 6 + 6 round up and plus 8 */
 #define INV_MPU6050_OUTPUT_DATA_SIZE         24
 
+#define INV_MPU6050_REG_INT_PIN_CFG	0x37
+#define INV_MPU6050_BIT_BYPASS_EN	0x2
+
 /* init parameters */
 #define INV_MPU6050_INIT_FIFO_RATE           50
 #define INV_MPU6050_TIME_STAMP_TOR           5
diff --git a/drivers/iio/imu/kmx61.c b/drivers/iio/imu/kmx61.c
new file mode 100644
index 000000000000..5cc3692acf37
--- /dev/null
+++ b/drivers/iio/imu/kmx61.c
@@ -0,0 +1,1595 @@
+/*
+ * KMX61 - Kionix 6-axis Accelerometer/Magnetometer
+ *
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * IIO driver for KMX61 (7-bit I2C slave address 0x0E or 0x0F).
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#define KMX61_DRV_NAME "kmx61"
+#define KMX61_GPIO_NAME "kmx61_int"
+#define KMX61_IRQ_NAME "kmx61_event"
+
+#define KMX61_REG_WHO_AM_I	0x00
+#define KMX61_REG_INS1		0x01
+#define KMX61_REG_INS2		0x02
+
+/*
+ * three 16-bit accelerometer output registers for X/Y/Z axis
+ * we use only XOUT_L as a base register, all other addresses
+ * can be obtained by applying an offset and are provided here
+ * only for clarity.
+ */
+#define KMX61_ACC_XOUT_L	0x0A
+#define KMX61_ACC_XOUT_H	0x0B
+#define KMX61_ACC_YOUT_L	0x0C
+#define KMX61_ACC_YOUT_H	0x0D
+#define KMX61_ACC_ZOUT_L	0x0E
+#define KMX61_ACC_ZOUT_H	0x0F
+
+/*
+ * one 16-bit temperature output register
+ */
+#define KMX61_TEMP_L		0x10
+#define KMX61_TEMP_H		0x11
+
+/*
+ * three 16-bit magnetometer output registers for X/Y/Z axis
+ */
+#define KMX61_MAG_XOUT_L	0x12
+#define KMX61_MAG_XOUT_H	0x13
+#define KMX61_MAG_YOUT_L	0x14
+#define KMX61_MAG_YOUT_H	0x15
+#define KMX61_MAG_ZOUT_L	0x16
+#define KMX61_MAG_ZOUT_H	0x17
+
+#define KMX61_REG_INL		0x28
+#define KMX61_REG_STBY		0x29
+#define KMX61_REG_CTRL1		0x2A
+#define KMX61_REG_CTRL2		0x2B
+#define KMX61_REG_ODCNTL	0x2C
+#define KMX61_REG_INC1		0x2D
+
+#define KMX61_REG_WUF_THRESH	0x3D
+#define KMX61_REG_WUF_TIMER	0x3E
+
+#define KMX61_ACC_STBY_BIT	BIT(0)
+#define KMX61_MAG_STBY_BIT	BIT(1)
+#define KMX61_ACT_STBY_BIT	BIT(7)
+
+#define KMX61_ALL_STBY		(KMX61_ACC_STBY_BIT | KMX61_MAG_STBY_BIT)
+
+#define KMX61_REG_INS1_BIT_WUFS		BIT(1)
+
+#define KMX61_REG_INS2_BIT_ZP		BIT(0)
+#define KMX61_REG_INS2_BIT_ZN		BIT(1)
+#define KMX61_REG_INS2_BIT_YP		BIT(2)
+#define KMX61_REG_INS2_BIT_YN		BIT(3)
+#define KMX61_REG_INS2_BIT_XP		BIT(4)
+#define KMX61_REG_INS2_BIT_XN		BIT(5)
+
+#define KMX61_REG_CTRL1_GSEL_MASK	0x03
+
+#define KMX61_REG_CTRL1_BIT_RES		BIT(4)
+#define KMX61_REG_CTRL1_BIT_DRDYE	BIT(5)
+#define KMX61_REG_CTRL1_BIT_WUFE	BIT(6)
+#define KMX61_REG_CTRL1_BIT_BTSE	BIT(7)
+
+#define KMX61_REG_INC1_BIT_WUFS		BIT(0)
+#define KMX61_REG_INC1_BIT_DRDYM	BIT(1)
+#define KMX61_REG_INC1_BIT_DRDYA	BIT(2)
+#define KMX61_REG_INC1_BIT_IEN		BIT(5)
+
+#define KMX61_ACC_ODR_SHIFT	0
+#define KMX61_MAG_ODR_SHIFT	4
+#define KMX61_ACC_ODR_MASK	0x0F
+#define KMX61_MAG_ODR_MASK	0xF0
+
+#define KMX61_OWUF_MASK		0x7
+
+#define KMX61_DEFAULT_WAKE_THRESH	1
+#define KMX61_DEFAULT_WAKE_DURATION	1
+
+#define KMX61_SLEEP_DELAY_MS	2000
+
+#define KMX61_CHIP_ID		0x12
+
+/* KMX61 devices */
+#define KMX61_ACC	0x01
+#define KMX61_MAG	0x02
+
+struct kmx61_data {
+	struct i2c_client *client;
+
+	/* serialize access to non-atomic ops, e.g set_mode */
+	struct mutex lock;
+
+	/* standby state */
+	bool acc_stby;
+	bool mag_stby;
+
+	/* power state */
+	bool acc_ps;
+	bool mag_ps;
+
+	/* config bits */
+	u8 range;
+	u8 odr_bits;
+	u8 wake_thresh;
+	u8 wake_duration;
+
+	/* accelerometer specific data */
+	struct iio_dev *acc_indio_dev;
+	struct iio_trigger *acc_dready_trig;
+	struct iio_trigger *motion_trig;
+	bool acc_dready_trig_on;
+	bool motion_trig_on;
+	bool ev_enable_state;
+
+	/* magnetometer specific data */
+	struct iio_dev *mag_indio_dev;
+	struct iio_trigger *mag_dready_trig;
+	bool mag_dready_trig_on;
+};
+
+enum kmx61_range {
+	KMX61_RANGE_2G,
+	KMX61_RANGE_4G,
+	KMX61_RANGE_8G,
+};
+
+enum kmx61_axis {
+	KMX61_AXIS_X,
+	KMX61_AXIS_Y,
+	KMX61_AXIS_Z,
+};
+
+static const u16 kmx61_uscale_table[] = {9582, 19163, 38326};
+
+static const struct {
+	int val;
+	int val2;
+	u8 odr_bits;
+} kmx61_samp_freq_table[] = { {12, 500000, 0x00},
+			{25, 0, 0x01},
+			{50, 0, 0x02},
+			{100, 0, 0x03},
+			{200, 0, 0x04},
+			{400, 0, 0x05},
+			{800, 0, 0x06},
+			{1600, 0, 0x07},
+			{0, 781000, 0x08},
+			{1, 563000, 0x09},
+			{3, 125000, 0x0A},
+			{6, 250000, 0x0B} };
+
+static const struct {
+	int val;
+	int val2;
+	int odr_bits;
+} kmx61_wake_up_odr_table[] = { {0, 781000, 0x00},
+				 {1, 563000, 0x01},
+				 {3, 125000, 0x02},
+				 {6, 250000, 0x03},
+				 {12, 500000, 0x04},
+				 {25, 0, 0x05},
+				 {50, 0, 0x06},
+				 {100, 0, 0x06},
+				 {200, 0, 0x06},
+				 {400, 0, 0x06},
+				 {800, 0, 0x06},
+				 {1600, 0, 0x06} };
+
+static IIO_CONST_ATTR(accel_scale_available, "0.009582 0.019163 0.038326");
+static IIO_CONST_ATTR(magn_scale_available, "0.001465");
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
+	"0.781000 1.563000 3.125000 6.250000 12.500000 25 50 100 200 400 800");
+
+static struct attribute *kmx61_acc_attributes[] = {
+	&iio_const_attr_accel_scale_available.dev_attr.attr,
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static struct attribute *kmx61_mag_attributes[] = {
+	&iio_const_attr_magn_scale_available.dev_attr.attr,
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group kmx61_acc_attribute_group = {
+	.attrs = kmx61_acc_attributes,
+};
+
+static const struct attribute_group kmx61_mag_attribute_group = {
+	.attrs = kmx61_mag_attributes,
+};
+
+static const struct iio_event_spec kmx61_event = {
+	.type = IIO_EV_TYPE_THRESH,
+	.dir = IIO_EV_DIR_EITHER,
+	.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			 BIT(IIO_EV_INFO_ENABLE) |
+			 BIT(IIO_EV_INFO_PERIOD),
+};
+
+#define KMX61_ACC_CHAN(_axis) { \
+	.type = IIO_ACCEL, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_ ## _axis, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+				BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.address = KMX61_ACC, \
+	.scan_index = KMX61_AXIS_ ## _axis, \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = 12, \
+		.storagebits = 16, \
+		.shift = 4, \
+		.endianness = IIO_LE, \
+	}, \
+	.event_spec = &kmx61_event, \
+	.num_event_specs = 1 \
+}
+
+#define KMX61_MAG_CHAN(_axis) { \
+	.type = IIO_MAGN, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_ ## _axis, \
+	.address = KMX61_MAG, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+				BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.scan_index = KMX61_AXIS_ ## _axis, \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = 14, \
+		.storagebits = 16, \
+		.shift = 2, \
+		.endianness = IIO_LE, \
+	}, \
+}
+
+static const struct iio_chan_spec kmx61_acc_channels[] = {
+	KMX61_ACC_CHAN(X),
+	KMX61_ACC_CHAN(Y),
+	KMX61_ACC_CHAN(Z),
+};
+
+static const struct iio_chan_spec kmx61_mag_channels[] = {
+	KMX61_MAG_CHAN(X),
+	KMX61_MAG_CHAN(Y),
+	KMX61_MAG_CHAN(Z),
+};
+
+static void kmx61_set_data(struct iio_dev *indio_dev, struct kmx61_data *data)
+{
+	struct kmx61_data **priv = iio_priv(indio_dev);
+
+	*priv = data;
+}
+
+static struct kmx61_data *kmx61_get_data(struct iio_dev *indio_dev)
+{
+	return *(struct kmx61_data **)iio_priv(indio_dev);
+}
+
+static int kmx61_convert_freq_to_bit(int val, int val2)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(kmx61_samp_freq_table); i++)
+		if (val == kmx61_samp_freq_table[i].val &&
+		    val2 == kmx61_samp_freq_table[i].val2)
+			return kmx61_samp_freq_table[i].odr_bits;
+	return -EINVAL;
+}
+
+static int kmx61_convert_bit_to_freq(u8 odr_bits, int *val, int *val2)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(kmx61_samp_freq_table); i++)
+		if (odr_bits == kmx61_samp_freq_table[i].odr_bits) {
+			*val = kmx61_samp_freq_table[i].val;
+			*val2 = kmx61_samp_freq_table[i].val2;
+			return 0;
+		}
+	return -EINVAL;
+}
+
+
+static int kmx61_convert_wake_up_odr_to_bit(int val, int val2)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(kmx61_wake_up_odr_table); ++i)
+		if (kmx61_wake_up_odr_table[i].val == val &&
+			kmx61_wake_up_odr_table[i].val2 == val2)
+				return kmx61_wake_up_odr_table[i].odr_bits;
+	return -EINVAL;
+}
+
+/**
+ * kmx61_set_mode() - set KMX61 device operating mode
+ * @data - kmx61 device private data pointer
+ * @mode - bitmask, indicating operating mode for @device
+ * @device - bitmask, indicating device for which @mode needs to be set
+ * @update - update stby bits stored in device's private  @data
+ *
+ * For each sensor (accelerometer/magnetometer) there are two operating modes
+ * STANDBY and OPERATION. Neither accel nor magn can be disabled independently
+ * if they are both enabled. Internal sensors state is saved in acc_stby and
+ * mag_stby members of driver's private @data.
+ */
+static int kmx61_set_mode(struct kmx61_data *data, u8 mode, u8 device,
+			  bool update)
+{
+	int ret;
+	int acc_stby = -1, mag_stby = -1;
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_STBY);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_stby\n");
+		return ret;
+	}
+	if (device & KMX61_ACC) {
+		if (mode & KMX61_ACC_STBY_BIT) {
+			ret |= KMX61_ACC_STBY_BIT;
+			acc_stby = 1;
+		} else {
+			ret &= ~KMX61_ACC_STBY_BIT;
+			acc_stby = 0;
+		}
+	}
+
+	if (device & KMX61_MAG) {
+		if (mode & KMX61_MAG_STBY_BIT) {
+			ret |= KMX61_MAG_STBY_BIT;
+			mag_stby = 1;
+		} else {
+			ret &= ~KMX61_MAG_STBY_BIT;
+			mag_stby = 0;
+		}
+	}
+
+	if (mode & KMX61_ACT_STBY_BIT)
+		ret |= KMX61_ACT_STBY_BIT;
+
+	ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_STBY, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_stby\n");
+		return ret;
+	}
+
+	if (acc_stby != -1 && update)
+		data->acc_stby = acc_stby;
+	if (mag_stby != -1 && update)
+		data->mag_stby = mag_stby;
+
+	return 0;
+}
+
+static int kmx61_get_mode(struct kmx61_data *data, u8 *mode, u8 device)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_STBY);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_stby\n");
+		return ret;
+	}
+	*mode = 0;
+
+	if (device & KMX61_ACC) {
+		if (ret & KMX61_ACC_STBY_BIT)
+			*mode |= KMX61_ACC_STBY_BIT;
+		else
+			*mode &= ~KMX61_ACC_STBY_BIT;
+	}
+
+	if (device & KMX61_MAG) {
+		if (ret & KMX61_MAG_STBY_BIT)
+			*mode |= KMX61_MAG_STBY_BIT;
+		else
+			*mode &= ~KMX61_MAG_STBY_BIT;
+	}
+
+	return 0;
+}
+
+static int kmx61_set_wake_up_odr(struct kmx61_data *data, int val, int val2)
+{
+	int ret, odr_bits;
+
+	odr_bits = kmx61_convert_wake_up_odr_to_bit(val, val2);
+	if (odr_bits < 0)
+		return odr_bits;
+
+	ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_CTRL2,
+					odr_bits);
+	if (ret < 0)
+		dev_err(&data->client->dev, "Error writing reg_ctrl2\n");
+	return ret;
+}
+
+static int kmx61_set_odr(struct kmx61_data *data, int val, int val2, u8 device)
+{
+	int ret;
+	u8 mode;
+	int lodr_bits, odr_bits;
+
+	ret = kmx61_get_mode(data, &mode, KMX61_ACC | KMX61_MAG);
+	if (ret < 0)
+		return ret;
+
+	lodr_bits = kmx61_convert_freq_to_bit(val, val2);
+	if (lodr_bits < 0)
+		return lodr_bits;
+
+	/* To change ODR, accel and magn must be in STDBY */
+	ret = kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG,
+			     true);
+	if (ret < 0)
+		return ret;
+
+	odr_bits = 0;
+	if (device & KMX61_ACC)
+		odr_bits |= lodr_bits << KMX61_ACC_ODR_SHIFT;
+	if (device & KMX61_MAG)
+		odr_bits |= lodr_bits << KMX61_MAG_ODR_SHIFT;
+
+	ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_ODCNTL,
+					odr_bits);
+	if (ret < 0)
+		return ret;
+
+	data->odr_bits = odr_bits;
+
+	if (device & KMX61_ACC) {
+		ret = kmx61_set_wake_up_odr(data, val, val2);
+		if (ret)
+			return ret;
+	}
+
+	return kmx61_set_mode(data, mode, KMX61_ACC | KMX61_MAG, true);
+}
+
+static int kmx61_get_odr(struct kmx61_data *data, int *val, int *val2,
+			 u8 device)
+{	int i;
+	u8 lodr_bits;
+
+	if (device & KMX61_ACC)
+		lodr_bits = (data->odr_bits >> KMX61_ACC_ODR_SHIFT) &
+			     KMX61_ACC_ODR_MASK;
+	else if (device & KMX61_MAG)
+		lodr_bits = (data->odr_bits >> KMX61_MAG_ODR_SHIFT) &
+			     KMX61_MAG_ODR_MASK;
+	else
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(kmx61_samp_freq_table); i++)
+		if (lodr_bits == kmx61_samp_freq_table[i].odr_bits) {
+			*val = kmx61_samp_freq_table[i].val;
+			*val2 = kmx61_samp_freq_table[i].val2;
+			return 0;
+		}
+	return -EINVAL;
+}
+
+static int kmx61_set_range(struct kmx61_data *data, u8 range)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_CTRL1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
+		return ret;
+	}
+
+	ret &= ~KMX61_REG_CTRL1_GSEL_MASK;
+	ret |= range & KMX61_REG_CTRL1_GSEL_MASK;
+
+	ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_CTRL1, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
+		return ret;
+	}
+
+	data->range = range;
+
+	return 0;
+}
+
+static int kmx61_set_scale(struct kmx61_data *data, u16 uscale)
+{
+	int ret, i;
+	u8  mode;
+
+	for (i = 0; i < ARRAY_SIZE(kmx61_uscale_table); i++) {
+		if (kmx61_uscale_table[i] == uscale) {
+			ret = kmx61_get_mode(data, &mode,
+					     KMX61_ACC | KMX61_MAG);
+			if (ret < 0)
+				return ret;
+
+			ret = kmx61_set_mode(data, KMX61_ALL_STBY,
+					     KMX61_ACC | KMX61_MAG, true);
+			if (ret < 0)
+				return ret;
+
+			ret = kmx61_set_range(data, i);
+			if (ret < 0)
+				return ret;
+
+			return  kmx61_set_mode(data, mode,
+					       KMX61_ACC | KMX61_MAG, true);
+		}
+	}
+	return -EINVAL;
+}
+
+static int kmx61_chip_init(struct kmx61_data *data)
+{
+	int ret, val, val2;
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_WHO_AM_I);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading who_am_i\n");
+		return ret;
+	}
+
+	if (ret != KMX61_CHIP_ID) {
+		dev_err(&data->client->dev,
+			"Wrong chip id, got %x expected %x\n",
+			 ret, KMX61_CHIP_ID);
+		return -EINVAL;
+	}
+
+	/* set accel 12bit, 4g range */
+	ret = kmx61_set_range(data, KMX61_RANGE_4G);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_ODCNTL);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_odcntl\n");
+		return ret;
+	}
+	data->odr_bits = ret;
+
+	/* set output data rate for wake up (motion detection) function */
+	ret = kmx61_convert_bit_to_freq(data->odr_bits, &val, &val2);
+	if (ret < 0)
+		return ret;
+
+	ret = kmx61_set_wake_up_odr(data, val, val2);
+	if (ret < 0)
+		return ret;
+
+	/* set acc/magn to OPERATION mode */
+	ret = kmx61_set_mode(data, 0, KMX61_ACC | KMX61_MAG, true);
+	if (ret < 0)
+		return ret;
+
+	data->wake_thresh = KMX61_DEFAULT_WAKE_THRESH;
+	data->wake_duration = KMX61_DEFAULT_WAKE_DURATION;
+
+	return 0;
+}
+
+static int kmx61_setup_new_data_interrupt(struct kmx61_data *data,
+					  bool status, u8 device)
+{
+	u8 mode;
+	int ret;
+
+	ret = kmx61_get_mode(data, &mode, KMX61_ACC | KMX61_MAG);
+	if (ret < 0)
+		return ret;
+
+	ret = kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG, true);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_INC1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
+		return ret;
+	}
+
+	if (status) {
+		ret |= KMX61_REG_INC1_BIT_IEN;
+		if (device & KMX61_ACC)
+			ret |= KMX61_REG_INC1_BIT_DRDYA;
+		if (device & KMX61_MAG)
+			ret |=  KMX61_REG_INC1_BIT_DRDYM;
+	} else {
+		ret &= ~KMX61_REG_INC1_BIT_IEN;
+		if (device & KMX61_ACC)
+			ret &= ~KMX61_REG_INC1_BIT_DRDYA;
+		if (device & KMX61_MAG)
+			ret &= ~KMX61_REG_INC1_BIT_DRDYM;
+	}
+	ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_INC1, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n");
+		return ret;
+	}
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_CTRL1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
+		return ret;
+	}
+
+	if (status)
+		ret |= KMX61_REG_CTRL1_BIT_DRDYE;
+	else
+		ret &= ~KMX61_REG_CTRL1_BIT_DRDYE;
+
+	ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_CTRL1, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
+		return ret;
+	}
+
+	return kmx61_set_mode(data, mode, KMX61_ACC | KMX61_MAG, true);
+}
+
+static int kmx61_chip_update_thresholds(struct kmx61_data *data)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(data->client,
+					KMX61_REG_WUF_TIMER,
+					data->wake_duration);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Errow writing reg_wuf_timer\n");
+		return ret;
+	}
+
+	ret = i2c_smbus_write_byte_data(data->client,
+					KMX61_REG_WUF_THRESH,
+					data->wake_thresh);
+	if (ret < 0)
+		dev_err(&data->client->dev, "Error writing reg_wuf_thresh\n");
+
+	return ret;
+}
+
+static int kmx61_setup_any_motion_interrupt(struct kmx61_data *data,
+					    bool status)
+{
+	u8 mode;
+	int ret;
+
+	ret = kmx61_get_mode(data, &mode, KMX61_ACC | KMX61_MAG);
+	if (ret < 0)
+		return ret;
+
+	ret = kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG, true);
+	if (ret < 0)
+		return ret;
+
+	ret = kmx61_chip_update_thresholds(data);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_INC1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_inc1\n");
+		return ret;
+	}
+	if (status)
+		ret |= (KMX61_REG_INC1_BIT_IEN | KMX61_REG_INC1_BIT_WUFS);
+	else
+		ret &= ~(KMX61_REG_INC1_BIT_IEN | KMX61_REG_INC1_BIT_WUFS);
+
+	ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_INC1, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_inc1\n");
+		return ret;
+	}
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_CTRL1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
+		return ret;
+	}
+
+	if (status)
+		ret |= KMX61_REG_CTRL1_BIT_WUFE | KMX61_REG_CTRL1_BIT_BTSE;
+	else
+		ret &= ~(KMX61_REG_CTRL1_BIT_WUFE | KMX61_REG_CTRL1_BIT_BTSE);
+
+	ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_CTRL1, ret);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
+		return ret;
+	}
+	mode |= KMX61_ACT_STBY_BIT;
+	return kmx61_set_mode(data, mode, KMX61_ACC | KMX61_MAG, true);
+}
+
+/**
+ * kmx61_set_power_state() - set power state for kmx61 @device
+ * @data - kmx61 device private pointer
+ * @on - power state to be set for @device
+ * @device - bitmask indicating device for which @on state needs to be set
+ *
+ * Notice that when ACC power state needs to be set to ON and MAG is in
+ * OPERATION then we know that kmx61_runtime_resume was already called
+ * so we must set ACC OPERATION mode here. The same happens when MAG power
+ * state needs to be set to ON and ACC is in OPERATION.
+ */
+static int kmx61_set_power_state(struct kmx61_data *data, bool on, u8 device)
+{
+#ifdef CONFIG_PM
+	int ret;
+
+	if (device & KMX61_ACC) {
+		if (on && !data->acc_ps && !data->mag_stby) {
+			ret = kmx61_set_mode(data, 0, KMX61_ACC, true);
+			if (ret < 0)
+				return ret;
+		}
+		data->acc_ps = on;
+	}
+	if (device & KMX61_MAG) {
+		if (on && !data->mag_ps && !data->acc_stby) {
+			ret = kmx61_set_mode(data, 0, KMX61_MAG, true);
+			if (ret < 0)
+				return ret;
+		}
+		data->mag_ps = on;
+	}
+
+	if (on) {
+		ret = pm_runtime_get_sync(&data->client->dev);
+	} else {
+		pm_runtime_mark_last_busy(&data->client->dev);
+		ret = pm_runtime_put_autosuspend(&data->client->dev);
+	}
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"Failed: kmx61_set_power_state for %d, ret %d\n",
+			on, ret);
+		if (on)
+			pm_runtime_put_noidle(&data->client->dev);
+
+		return ret;
+	}
+#endif
+	return 0;
+}
+
+static int kmx61_read_measurement(struct kmx61_data *data, u8 base, u8 offset)
+{
+	int ret;
+	u8 reg = base + offset * 2;
+
+	ret = i2c_smbus_read_word_data(data->client, reg);
+	if (ret < 0)
+		dev_err(&data->client->dev, "failed to read reg at %x\n", reg);
+
+	return ret;
+}
+
+static int kmx61_read_raw(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan, int *val,
+			  int *val2, long mask)
+{
+	int ret;
+	u8 base_reg;
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_ACCEL:
+			base_reg = KMX61_ACC_XOUT_L;
+			break;
+		case IIO_MAGN:
+			base_reg = KMX61_MAG_XOUT_L;
+			break;
+		default:
+			return -EINVAL;
+		}
+		mutex_lock(&data->lock);
+
+		ret = kmx61_set_power_state(data, true, chan->address);
+		if (ret) {
+			mutex_unlock(&data->lock);
+			return ret;
+		}
+
+		ret = kmx61_read_measurement(data, base_reg, chan->scan_index);
+		if (ret < 0) {
+			kmx61_set_power_state(data, false, chan->address);
+			mutex_unlock(&data->lock);
+			return ret;
+		}
+		*val = sign_extend32(ret >> chan->scan_type.shift,
+				     chan->scan_type.realbits - 1);
+		ret = kmx61_set_power_state(data, false, chan->address);
+
+		mutex_unlock(&data->lock);
+		if (ret)
+			return ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ACCEL:
+			*val = 0;
+			*val2 = kmx61_uscale_table[data->range];
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_MAGN:
+			/* 14 bits res, 1465 microGauss per magn count */
+			*val = 0;
+			*val2 = 1465;
+			return IIO_VAL_INT_PLUS_MICRO;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (chan->type != IIO_ACCEL && chan->type != IIO_MAGN)
+			return -EINVAL;
+
+		mutex_lock(&data->lock);
+		ret = kmx61_get_odr(data, val, val2, chan->address);
+		mutex_unlock(&data->lock);
+		if (ret)
+			return -EINVAL;
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+	return -EINVAL;
+}
+
+static int kmx61_write_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan, int val,
+			   int val2, long mask)
+{
+	int ret;
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (chan->type != IIO_ACCEL && chan->type != IIO_MAGN)
+			return -EINVAL;
+
+		mutex_lock(&data->lock);
+		ret = kmx61_set_odr(data, val, val2, chan->address);
+		mutex_unlock(&data->lock);
+		return ret;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ACCEL:
+			if (val != 0)
+				return -EINVAL;
+			mutex_lock(&data->lock);
+			ret = kmx61_set_scale(data, val2);
+			mutex_unlock(&data->lock);
+			return ret;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int kmx61_read_event(struct iio_dev *indio_dev,
+			    const struct iio_chan_spec *chan,
+			    enum iio_event_type type,
+			    enum iio_event_direction dir,
+			    enum iio_event_info info,
+			    int *val, int *val2)
+{
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+
+	*val2 = 0;
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		*val = data->wake_thresh;
+		return IIO_VAL_INT;
+	case IIO_EV_INFO_PERIOD:
+		*val = data->wake_duration;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int kmx61_write_event(struct iio_dev *indio_dev,
+			     const struct iio_chan_spec *chan,
+			     enum iio_event_type type,
+			     enum iio_event_direction dir,
+			     enum iio_event_info info,
+			     int val, int val2)
+{
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+
+	if (data->ev_enable_state)
+		return -EBUSY;
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		data->wake_thresh = val;
+		return IIO_VAL_INT;
+	case IIO_EV_INFO_PERIOD:
+		data->wake_duration = val;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int kmx61_read_event_config(struct iio_dev *indio_dev,
+				   const struct iio_chan_spec *chan,
+				   enum iio_event_type type,
+				   enum iio_event_direction dir)
+{
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+
+	return data->ev_enable_state;
+}
+
+static int kmx61_write_event_config(struct iio_dev *indio_dev,
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir,
+				    int state)
+{
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+	int ret = 0;
+
+	if (state && data->ev_enable_state)
+		return 0;
+
+	mutex_lock(&data->lock);
+
+	if (!state && data->motion_trig_on) {
+		data->ev_enable_state = false;
+		goto err_unlock;
+	}
+
+	ret = kmx61_set_power_state(data, state, KMX61_ACC);
+	if (ret < 0)
+		goto err_unlock;
+
+	ret = kmx61_setup_any_motion_interrupt(data, state);
+	if (ret < 0) {
+		kmx61_set_power_state(data, false, KMX61_ACC);
+		goto err_unlock;
+	}
+
+	data->ev_enable_state = state;
+
+err_unlock:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int kmx61_acc_validate_trigger(struct iio_dev *indio_dev,
+				      struct iio_trigger *trig)
+{
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+
+	if (data->acc_dready_trig != trig && data->motion_trig != trig)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int kmx61_mag_validate_trigger(struct iio_dev *indio_dev,
+				      struct iio_trigger *trig)
+{
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+
+	if (data->mag_dready_trig != trig)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct iio_info kmx61_acc_info = {
+	.driver_module		= THIS_MODULE,
+	.read_raw		= kmx61_read_raw,
+	.write_raw		= kmx61_write_raw,
+	.attrs			= &kmx61_acc_attribute_group,
+	.read_event_value	= kmx61_read_event,
+	.write_event_value	= kmx61_write_event,
+	.read_event_config	= kmx61_read_event_config,
+	.write_event_config	= kmx61_write_event_config,
+	.validate_trigger	= kmx61_acc_validate_trigger,
+};
+
+static const struct iio_info kmx61_mag_info = {
+	.driver_module		= THIS_MODULE,
+	.read_raw		= kmx61_read_raw,
+	.write_raw		= kmx61_write_raw,
+	.attrs			= &kmx61_mag_attribute_group,
+	.validate_trigger	= kmx61_mag_validate_trigger,
+};
+
+
+static int kmx61_data_rdy_trigger_set_state(struct iio_trigger *trig,
+					    bool state)
+{
+	int ret = 0;
+	u8 device;
+
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+
+	mutex_lock(&data->lock);
+
+	if (!state && data->ev_enable_state && data->motion_trig_on) {
+		data->motion_trig_on = false;
+		goto err_unlock;
+	}
+
+	if (data->acc_dready_trig == trig || data->motion_trig == trig)
+		device = KMX61_ACC;
+	else
+		device = KMX61_MAG;
+
+	ret = kmx61_set_power_state(data, state, device);
+	if (ret < 0)
+		goto err_unlock;
+
+	if (data->acc_dready_trig == trig || data->mag_dready_trig == trig)
+		ret = kmx61_setup_new_data_interrupt(data, state, device);
+	else
+		ret = kmx61_setup_any_motion_interrupt(data, state);
+	if (ret < 0) {
+		kmx61_set_power_state(data, false, device);
+		goto err_unlock;
+	}
+
+	if (data->acc_dready_trig == trig)
+		data->acc_dready_trig_on = state;
+	else if (data->mag_dready_trig == trig)
+		data->mag_dready_trig_on = state;
+	else
+		data->motion_trig_on = state;
+err_unlock:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int kmx61_trig_try_reenable(struct iio_trigger *trig)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_INL);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_inl\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct iio_trigger_ops kmx61_trigger_ops = {
+	.set_trigger_state = kmx61_data_rdy_trigger_set_state,
+	.try_reenable = kmx61_trig_try_reenable,
+	.owner = THIS_MODULE,
+};
+
+static irqreturn_t kmx61_event_handler(int irq, void *private)
+{
+	struct kmx61_data *data = private;
+	struct iio_dev *indio_dev = data->acc_indio_dev;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_INS1);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error reading reg_ins1\n");
+		goto ack_intr;
+	}
+
+	if (ret & KMX61_REG_INS1_BIT_WUFS) {
+		ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_INS2);
+		if (ret < 0) {
+			dev_err(&data->client->dev, "Error reading reg_ins2\n");
+			goto ack_intr;
+		}
+
+		if (ret & KMX61_REG_INS2_BIT_XN)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_X,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_FALLING),
+				       0);
+
+		if (ret & KMX61_REG_INS2_BIT_XP)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_X,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_RISING),
+				       0);
+
+		if (ret & KMX61_REG_INS2_BIT_YN)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_Y,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_FALLING),
+				       0);
+
+		if (ret & KMX61_REG_INS2_BIT_YP)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_Y,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_RISING),
+				       0);
+
+		if (ret & KMX61_REG_INS2_BIT_ZN)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_Z,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_FALLING),
+				       0);
+
+		if (ret & KMX61_REG_INS2_BIT_ZP)
+			iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+				       0,
+				       IIO_MOD_Z,
+				       IIO_EV_TYPE_THRESH,
+				       IIO_EV_DIR_RISING),
+				       0);
+	}
+
+ack_intr:
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_CTRL1);
+	if (ret < 0)
+		dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
+
+	ret |= KMX61_REG_CTRL1_BIT_RES;
+	ret = i2c_smbus_write_byte_data(data->client, KMX61_REG_CTRL1, ret);
+	if (ret < 0)
+		dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
+
+	ret = i2c_smbus_read_byte_data(data->client, KMX61_REG_INL);
+	if (ret < 0)
+		dev_err(&data->client->dev, "Error reading reg_inl\n");
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t kmx61_data_rdy_trig_poll(int irq, void *private)
+{
+	struct kmx61_data *data = private;
+
+	if (data->acc_dready_trig_on)
+		iio_trigger_poll(data->acc_dready_trig);
+	if (data->mag_dready_trig_on)
+		iio_trigger_poll(data->mag_dready_trig);
+
+	if (data->motion_trig_on)
+		iio_trigger_poll(data->motion_trig);
+
+	if (data->ev_enable_state)
+		return IRQ_WAKE_THREAD;
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t kmx61_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct kmx61_data *data = kmx61_get_data(indio_dev);
+	int bit, ret, i = 0;
+	u8 base;
+	s16 buffer[8];
+
+	if (indio_dev == data->acc_indio_dev)
+		base = KMX61_ACC_XOUT_L;
+	else
+		base = KMX61_MAG_XOUT_L;
+
+	mutex_lock(&data->lock);
+	for_each_set_bit(bit, indio_dev->buffer->scan_mask,
+			 indio_dev->masklength) {
+		ret = kmx61_read_measurement(data, base, bit);
+		if (ret < 0) {
+			mutex_unlock(&data->lock);
+			goto err;
+		}
+		buffer[i++] = ret;
+	}
+	mutex_unlock(&data->lock);
+
+	iio_push_to_buffers(indio_dev, buffer);
+err:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static const char *kmx61_match_acpi_device(struct device *dev)
+{
+	const struct acpi_device_id *id;
+
+	id = acpi_match_device(dev->driver->acpi_match_table, dev);
+	if (!id)
+		return NULL;
+	return dev_name(dev);
+}
+
+static int kmx61_gpio_probe(struct i2c_client *client, struct kmx61_data *data)
+{
+	struct device *dev;
+	struct gpio_desc *gpio;
+	int ret;
+
+	if (!client)
+		return -EINVAL;
+
+	dev = &client->dev;
+
+	/* data ready gpio interrupt pin */
+	gpio = devm_gpiod_get_index(dev, KMX61_GPIO_NAME, 0);
+	if (IS_ERR(gpio)) {
+		dev_err(dev, "acpi gpio get index failed\n");
+		return PTR_ERR(gpio);
+	}
+
+	ret = gpiod_direction_input(gpio);
+	if (ret)
+		return ret;
+
+	ret = gpiod_to_irq(gpio);
+
+	dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
+	return ret;
+}
+
+static struct iio_dev *kmx61_indiodev_setup(struct kmx61_data *data,
+					    const struct iio_info *info,
+					    const struct iio_chan_spec *chan,
+					    int num_channels,
+					    const char *name)
+{
+	struct iio_dev *indio_dev;
+
+	indio_dev = devm_iio_device_alloc(&data->client->dev, sizeof(data));
+	if (!indio_dev)
+		return ERR_PTR(-ENOMEM);
+
+	kmx61_set_data(indio_dev, data);
+
+	indio_dev->dev.parent = &data->client->dev;
+	indio_dev->channels = chan;
+	indio_dev->num_channels = num_channels;
+	indio_dev->name = name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = info;
+
+	return indio_dev;
+}
+
+static struct iio_trigger *kmx61_trigger_setup(struct kmx61_data *data,
+					       struct iio_dev *indio_dev,
+					       const char *tag)
+{
+	struct iio_trigger *trig;
+	int ret;
+
+	trig = devm_iio_trigger_alloc(&data->client->dev,
+				      "%s-%s-dev%d",
+				      indio_dev->name,
+				      tag,
+				      indio_dev->id);
+	if (!trig)
+		return ERR_PTR(-ENOMEM);
+
+	trig->dev.parent = &data->client->dev;
+	trig->ops = &kmx61_trigger_ops;
+	iio_trigger_set_drvdata(trig, indio_dev);
+
+	ret = iio_trigger_register(trig);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return trig;
+}
+
+static int kmx61_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
+{
+	int ret;
+	struct kmx61_data *data;
+	const char *name = NULL;
+
+	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	data->client = client;
+
+	mutex_init(&data->lock);
+
+	if (id)
+		name = id->name;
+	else if (ACPI_HANDLE(&client->dev))
+		name = kmx61_match_acpi_device(&client->dev);
+	else
+		return -ENODEV;
+
+	data->acc_indio_dev =
+		kmx61_indiodev_setup(data, &kmx61_acc_info,
+				     kmx61_acc_channels,
+				     ARRAY_SIZE(kmx61_acc_channels),
+				     name);
+	if (IS_ERR(data->acc_indio_dev))
+		return PTR_ERR(data->acc_indio_dev);
+
+	data->mag_indio_dev =
+		kmx61_indiodev_setup(data, &kmx61_mag_info,
+				     kmx61_mag_channels,
+				     ARRAY_SIZE(kmx61_mag_channels),
+				     name);
+	if (IS_ERR(data->mag_indio_dev))
+		return PTR_ERR(data->mag_indio_dev);
+
+	ret = kmx61_chip_init(data);
+	if (ret < 0)
+		return ret;
+
+	if (client->irq < 0)
+		client->irq = kmx61_gpio_probe(client, data);
+
+	if (client->irq >= 0) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						kmx61_data_rdy_trig_poll,
+						kmx61_event_handler,
+						IRQF_TRIGGER_RISING,
+						KMX61_IRQ_NAME,
+						data);
+		if (ret)
+			goto err_chip_uninit;
+
+		data->acc_dready_trig =
+			kmx61_trigger_setup(data, data->acc_indio_dev,
+					    "dready");
+		if (IS_ERR(data->acc_dready_trig)) {
+			ret = PTR_ERR(data->acc_dready_trig);
+			goto err_chip_uninit;
+		}
+
+		data->mag_dready_trig =
+			kmx61_trigger_setup(data, data->mag_indio_dev,
+					    "dready");
+		if (IS_ERR(data->mag_dready_trig)) {
+			ret = PTR_ERR(data->mag_dready_trig);
+			goto err_trigger_unregister_acc_dready;
+		}
+
+		data->motion_trig =
+			kmx61_trigger_setup(data, data->acc_indio_dev,
+					    "any-motion");
+		if (IS_ERR(data->motion_trig)) {
+			ret = PTR_ERR(data->motion_trig);
+			goto err_trigger_unregister_mag_dready;
+		}
+
+		ret = iio_triggered_buffer_setup(data->acc_indio_dev,
+						 &iio_pollfunc_store_time,
+						 kmx61_trigger_handler,
+						 NULL);
+		if (ret < 0) {
+			dev_err(&data->client->dev,
+				"Failed to setup acc triggered buffer\n");
+			goto err_trigger_unregister_motion;
+		}
+
+		ret = iio_triggered_buffer_setup(data->mag_indio_dev,
+						 &iio_pollfunc_store_time,
+						 kmx61_trigger_handler,
+						 NULL);
+		if (ret < 0) {
+			dev_err(&data->client->dev,
+				"Failed to setup mag triggered buffer\n");
+			goto err_buffer_cleanup_acc;
+		}
+	}
+
+	ret = iio_device_register(data->acc_indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to register acc iio device\n");
+		goto err_buffer_cleanup_mag;
+	}
+
+	ret = iio_device_register(data->mag_indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to register mag iio device\n");
+		goto err_iio_unregister_acc;
+	}
+
+	ret = pm_runtime_set_active(&client->dev);
+	if (ret < 0)
+		goto err_iio_unregister_mag;
+
+	pm_runtime_enable(&client->dev);
+	pm_runtime_set_autosuspend_delay(&client->dev, KMX61_SLEEP_DELAY_MS);
+	pm_runtime_use_autosuspend(&client->dev);
+
+	return 0;
+
+err_iio_unregister_mag:
+	iio_device_unregister(data->mag_indio_dev);
+err_iio_unregister_acc:
+	iio_device_unregister(data->acc_indio_dev);
+err_buffer_cleanup_mag:
+	if (client->irq >= 0)
+		iio_triggered_buffer_cleanup(data->mag_indio_dev);
+err_buffer_cleanup_acc:
+	if (client->irq >= 0)
+		iio_triggered_buffer_cleanup(data->acc_indio_dev);
+err_trigger_unregister_motion:
+	iio_trigger_unregister(data->motion_trig);
+err_trigger_unregister_mag_dready:
+	iio_trigger_unregister(data->mag_dready_trig);
+err_trigger_unregister_acc_dready:
+	iio_trigger_unregister(data->acc_dready_trig);
+err_chip_uninit:
+	kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG, true);
+	return ret;
+}
+
+static int kmx61_remove(struct i2c_client *client)
+{
+	struct kmx61_data *data = i2c_get_clientdata(client);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+	pm_runtime_put_noidle(&client->dev);
+
+	iio_device_unregister(data->acc_indio_dev);
+	iio_device_unregister(data->mag_indio_dev);
+
+	if (client->irq >= 0) {
+		iio_triggered_buffer_cleanup(data->acc_indio_dev);
+		iio_triggered_buffer_cleanup(data->mag_indio_dev);
+		iio_trigger_unregister(data->acc_dready_trig);
+		iio_trigger_unregister(data->mag_dready_trig);
+		iio_trigger_unregister(data->motion_trig);
+	}
+
+	mutex_lock(&data->lock);
+	kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG, true);
+	mutex_unlock(&data->lock);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int kmx61_suspend(struct device *dev)
+{
+	int ret;
+	struct kmx61_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+	mutex_lock(&data->lock);
+	ret = kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG,
+			     false);
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int kmx61_resume(struct device *dev)
+{
+	u8 stby = 0;
+	struct kmx61_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+	if (data->acc_stby)
+		stby |= KMX61_ACC_STBY_BIT;
+	if (data->mag_stby)
+		stby |= KMX61_MAG_STBY_BIT;
+
+	return kmx61_set_mode(data, stby, KMX61_ACC | KMX61_MAG, true);
+}
+#endif
+
+#ifdef CONFIG_PM
+static int kmx61_runtime_suspend(struct device *dev)
+{
+	struct kmx61_data *data = i2c_get_clientdata(to_i2c_client(dev));
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = kmx61_set_mode(data, KMX61_ALL_STBY, KMX61_ACC | KMX61_MAG, true);
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int kmx61_runtime_resume(struct device *dev)
+{
+	struct kmx61_data *data = i2c_get_clientdata(to_i2c_client(dev));
+	u8 stby = 0;
+
+	if (!data->acc_ps)
+		stby |= KMX61_ACC_STBY_BIT;
+	if (!data->mag_ps)
+		stby |= KMX61_MAG_STBY_BIT;
+
+	return kmx61_set_mode(data, stby, KMX61_ACC | KMX61_MAG, true);
+}
+#endif
+
+static const struct dev_pm_ops kmx61_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(kmx61_suspend, kmx61_resume)
+	SET_RUNTIME_PM_OPS(kmx61_runtime_suspend, kmx61_runtime_resume, NULL)
+};
+
+static const struct acpi_device_id kmx61_acpi_match[] = {
+	{"KMX61021", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(acpi, kmx61_acpi_match);
+
+static const struct i2c_device_id kmx61_id[] = {
+	{"kmx611021", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, kmx61_id);
+
+static struct i2c_driver kmx61_driver = {
+	.driver = {
+		.name = KMX61_DRV_NAME,
+		.acpi_match_table = ACPI_PTR(kmx61_acpi_match),
+		.pm = &kmx61_pm_ops,
+	},
+	.probe		= kmx61_probe,
+	.remove		= kmx61_remove,
+	.id_table	= kmx61_id,
+};
+
+module_i2c_driver(kmx61_driver);
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>");
+MODULE_DESCRIPTION("KMX61 accelerometer/magnetometer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index f971f79103ec..403b72878b0b 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -178,6 +178,80 @@ static ssize_t iio_scan_el_show(struct device *dev,
 	return sprintf(buf, "%d\n", ret);
 }
 
+/* Note NULL used as error indicator as it doesn't make sense. */
+static const unsigned long *iio_scan_mask_match(const unsigned long *av_masks,
+					  unsigned int masklength,
+					  const unsigned long *mask)
+{
+	if (bitmap_empty(mask, masklength))
+		return NULL;
+	while (*av_masks) {
+		if (bitmap_subset(mask, av_masks, masklength))
+			return av_masks;
+		av_masks += BITS_TO_LONGS(masklength);
+	}
+	return NULL;
+}
+
+static bool iio_validate_scan_mask(struct iio_dev *indio_dev,
+	const unsigned long *mask)
+{
+	if (!indio_dev->setup_ops->validate_scan_mask)
+		return true;
+
+	return indio_dev->setup_ops->validate_scan_mask(indio_dev, mask);
+}
+
+/**
+ * iio_scan_mask_set() - set particular bit in the scan mask
+ * @indio_dev: the iio device
+ * @buffer: the buffer whose scan mask we are interested in
+ * @bit: the bit to be set.
+ *
+ * Note that at this point we have no way of knowing what other
+ * buffers might request, hence this code only verifies that the
+ * individual buffers request is plausible.
+ */
+static int iio_scan_mask_set(struct iio_dev *indio_dev,
+		      struct iio_buffer *buffer, int bit)
+{
+	const unsigned long *mask;
+	unsigned long *trialmask;
+
+	trialmask = kmalloc(sizeof(*trialmask)*
+			    BITS_TO_LONGS(indio_dev->masklength),
+			    GFP_KERNEL);
+
+	if (trialmask == NULL)
+		return -ENOMEM;
+	if (!indio_dev->masklength) {
+		WARN_ON("Trying to set scanmask prior to registering buffer\n");
+		goto err_invalid_mask;
+	}
+	bitmap_copy(trialmask, buffer->scan_mask, indio_dev->masklength);
+	set_bit(bit, trialmask);
+
+	if (!iio_validate_scan_mask(indio_dev, trialmask))
+		goto err_invalid_mask;
+
+	if (indio_dev->available_scan_masks) {
+		mask = iio_scan_mask_match(indio_dev->available_scan_masks,
+					   indio_dev->masklength,
+					   trialmask);
+		if (!mask)
+			goto err_invalid_mask;
+	}
+	bitmap_copy(buffer->scan_mask, trialmask, indio_dev->masklength);
+
+	kfree(trialmask);
+
+	return 0;
+
+err_invalid_mask:
+	kfree(trialmask);
+	return -EINVAL;
+}
+
 static int iio_scan_mask_clear(struct iio_buffer *buffer, int bit)
 {
 	clear_bit(bit, buffer->scan_mask);
@@ -309,115 +383,19 @@ static int iio_buffer_add_channel_sysfs(struct iio_dev *indio_dev,
 	return ret;
 }
 
-static const char * const iio_scan_elements_group_name = "scan_elements";
-
-int iio_buffer_register(struct iio_dev *indio_dev,
-			const struct iio_chan_spec *channels,
-			int num_channels)
-{
-	struct iio_dev_attr *p;
-	struct attribute **attr;
-	struct iio_buffer *buffer = indio_dev->buffer;
-	int ret, i, attrn, attrcount, attrcount_orig = 0;
-
-	if (buffer->attrs)
-		indio_dev->groups[indio_dev->groupcounter++] = buffer->attrs;
-
-	if (buffer->scan_el_attrs != NULL) {
-		attr = buffer->scan_el_attrs->attrs;
-		while (*attr++ != NULL)
-			attrcount_orig++;
-	}
-	attrcount = attrcount_orig;
-	INIT_LIST_HEAD(&buffer->scan_el_dev_attr_list);
-	if (channels) {
-		/* new magic */
-		for (i = 0; i < num_channels; i++) {
-			if (channels[i].scan_index < 0)
-				continue;
-
-			/* Establish necessary mask length */
-			if (channels[i].scan_index >
-			    (int)indio_dev->masklength - 1)
-				indio_dev->masklength
-					= channels[i].scan_index + 1;
-
-			ret = iio_buffer_add_channel_sysfs(indio_dev,
-							 &channels[i]);
-			if (ret < 0)
-				goto error_cleanup_dynamic;
-			attrcount += ret;
-			if (channels[i].type == IIO_TIMESTAMP)
-				indio_dev->scan_index_timestamp =
-					channels[i].scan_index;
-		}
-		if (indio_dev->masklength && buffer->scan_mask == NULL) {
-			buffer->scan_mask = kcalloc(BITS_TO_LONGS(indio_dev->masklength),
-						    sizeof(*buffer->scan_mask),
-						    GFP_KERNEL);
-			if (buffer->scan_mask == NULL) {
-				ret = -ENOMEM;
-				goto error_cleanup_dynamic;
-			}
-		}
-	}
-
-	buffer->scan_el_group.name = iio_scan_elements_group_name;
-
-	buffer->scan_el_group.attrs = kcalloc(attrcount + 1,
-					      sizeof(buffer->scan_el_group.attrs[0]),
-					      GFP_KERNEL);
-	if (buffer->scan_el_group.attrs == NULL) {
-		ret = -ENOMEM;
-		goto error_free_scan_mask;
-	}
-	if (buffer->scan_el_attrs)
-		memcpy(buffer->scan_el_group.attrs, buffer->scan_el_attrs,
-		       sizeof(buffer->scan_el_group.attrs[0])*attrcount_orig);
-	attrn = attrcount_orig;
-
-	list_for_each_entry(p, &buffer->scan_el_dev_attr_list, l)
-		buffer->scan_el_group.attrs[attrn++] = &p->dev_attr.attr;
-	indio_dev->groups[indio_dev->groupcounter++] = &buffer->scan_el_group;
-
-	return 0;
-
-error_free_scan_mask:
-	kfree(buffer->scan_mask);
-error_cleanup_dynamic:
-	iio_free_chan_devattr_list(&buffer->scan_el_dev_attr_list);
-
-	return ret;
-}
-EXPORT_SYMBOL(iio_buffer_register);
-
-void iio_buffer_unregister(struct iio_dev *indio_dev)
-{
-	kfree(indio_dev->buffer->scan_mask);
-	kfree(indio_dev->buffer->scan_el_group.attrs);
-	iio_free_chan_devattr_list(&indio_dev->buffer->scan_el_dev_attr_list);
-}
-EXPORT_SYMBOL(iio_buffer_unregister);
-
-ssize_t iio_buffer_read_length(struct device *dev,
-			       struct device_attribute *attr,
-			       char *buf)
+static ssize_t iio_buffer_read_length(struct device *dev,
+				      struct device_attribute *attr,
+				      char *buf)
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_buffer *buffer = indio_dev->buffer;
 
-	if (buffer->access->get_length)
-		return sprintf(buf, "%d\n",
-			       buffer->access->get_length(buffer));
-
-	return 0;
+	return sprintf(buf, "%d\n", buffer->length);
 }
-EXPORT_SYMBOL(iio_buffer_read_length);
 
-ssize_t iio_buffer_write_length(struct device *dev,
-				struct device_attribute *attr,
-				const char *buf,
-				size_t len)
+static ssize_t iio_buffer_write_length(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t len)
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_buffer *buffer = indio_dev->buffer;
@@ -428,47 +406,28 @@ ssize_t iio_buffer_write_length(struct device *dev,
 	if (ret)
 		return ret;
 
-	if (buffer->access->get_length)
-		if (val == buffer->access->get_length(buffer))
-			return len;
+	if (val == buffer->length)
+		return len;
 
 	mutex_lock(&indio_dev->mlock);
 	if (iio_buffer_is_active(indio_dev->buffer)) {
 		ret = -EBUSY;
 	} else {
-		if (buffer->access->set_length)
-			buffer->access->set_length(buffer, val);
+		buffer->access->set_length(buffer, val);
 		ret = 0;
 	}
 	mutex_unlock(&indio_dev->mlock);
 
 	return ret ? ret : len;
 }
-EXPORT_SYMBOL(iio_buffer_write_length);
 
-ssize_t iio_buffer_show_enable(struct device *dev,
-			       struct device_attribute *attr,
-			       char *buf)
+static ssize_t iio_buffer_show_enable(struct device *dev,
+				      struct device_attribute *attr,
+				      char *buf)
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	return sprintf(buf, "%d\n", iio_buffer_is_active(indio_dev->buffer));
 }
-EXPORT_SYMBOL(iio_buffer_show_enable);
-
-/* Note NULL used as error indicator as it doesn't make sense. */
-static const unsigned long *iio_scan_mask_match(const unsigned long *av_masks,
-					  unsigned int masklength,
-					  const unsigned long *mask)
-{
-	if (bitmap_empty(mask, masklength))
-		return NULL;
-	while (*av_masks) {
-		if (bitmap_subset(mask, av_masks, masklength))
-			return av_masks;
-		av_masks += BITS_TO_LONGS(masklength);
-	}
-	return NULL;
-}
 
 static int iio_compute_scan_bytes(struct iio_dev *indio_dev,
 				const unsigned long *mask, bool timestamp)
@@ -755,10 +714,10 @@ out_unlock:
 }
 EXPORT_SYMBOL_GPL(iio_update_buffers);
 
-ssize_t iio_buffer_store_enable(struct device *dev,
-				struct device_attribute *attr,
-				const char *buf,
-				size_t len)
+static ssize_t iio_buffer_store_enable(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf,
+				       size_t len)
 {
 	int ret;
 	bool requested_state;
@@ -790,83 +749,146 @@ done:
 	mutex_unlock(&indio_dev->mlock);
 	return (ret < 0) ? ret : len;
 }
-EXPORT_SYMBOL(iio_buffer_store_enable);
 
-/**
- * iio_validate_scan_mask_onehot() - Validates that exactly one channel is selected
- * @indio_dev: the iio device
- * @mask: scan mask to be checked
- *
- * Return true if exactly one bit is set in the scan mask, false otherwise. It
- * can be used for devices where only one channel can be active for sampling at
- * a time.
- */
-bool iio_validate_scan_mask_onehot(struct iio_dev *indio_dev,
-	const unsigned long *mask)
-{
-	return bitmap_weight(mask, indio_dev->masklength) == 1;
-}
-EXPORT_SYMBOL_GPL(iio_validate_scan_mask_onehot);
-
-static bool iio_validate_scan_mask(struct iio_dev *indio_dev,
-	const unsigned long *mask)
-{
-	if (!indio_dev->setup_ops->validate_scan_mask)
-		return true;
+static const char * const iio_scan_elements_group_name = "scan_elements";
 
-	return indio_dev->setup_ops->validate_scan_mask(indio_dev, mask);
-}
+static DEVICE_ATTR(length, S_IRUGO | S_IWUSR, iio_buffer_read_length,
+		   iio_buffer_write_length);
+static struct device_attribute dev_attr_length_ro = __ATTR(length,
+	S_IRUGO, iio_buffer_read_length, NULL);
+static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR,
+		   iio_buffer_show_enable, iio_buffer_store_enable);
 
-/**
- * iio_scan_mask_set() - set particular bit in the scan mask
- * @indio_dev: the iio device
- * @buffer: the buffer whose scan mask we are interested in
- * @bit: the bit to be set.
- *
- * Note that at this point we have no way of knowing what other
- * buffers might request, hence this code only verifies that the
- * individual buffers request is plausible.
- */
-int iio_scan_mask_set(struct iio_dev *indio_dev,
-		      struct iio_buffer *buffer, int bit)
+int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev)
 {
-	const unsigned long *mask;
-	unsigned long *trialmask;
+	struct iio_dev_attr *p;
+	struct attribute **attr;
+	struct iio_buffer *buffer = indio_dev->buffer;
+	int ret, i, attrn, attrcount, attrcount_orig = 0;
+	const struct iio_chan_spec *channels;
 
-	trialmask = kmalloc(sizeof(*trialmask)*
-			    BITS_TO_LONGS(indio_dev->masklength),
-			    GFP_KERNEL);
+	if (!buffer)
+		return 0;
 
-	if (trialmask == NULL)
+	attrcount = 0;
+	if (buffer->attrs) {
+		while (buffer->attrs[attrcount] != NULL)
+			attrcount++;
+	}
+
+	buffer->buffer_group.name = "buffer";
+	buffer->buffer_group.attrs = kcalloc(attrcount + 3,
+			sizeof(*buffer->buffer_group.attrs), GFP_KERNEL);
+	if (!buffer->buffer_group.attrs)
 		return -ENOMEM;
-	if (!indio_dev->masklength) {
-		WARN_ON("Trying to set scanmask prior to registering buffer\n");
-		goto err_invalid_mask;
+
+	if (buffer->access->set_length)
+		buffer->buffer_group.attrs[0] = &dev_attr_length.attr;
+	else
+		buffer->buffer_group.attrs[0] = &dev_attr_length_ro.attr;
+	buffer->buffer_group.attrs[1] = &dev_attr_enable.attr;
+	if (buffer->attrs)
+		memcpy(&buffer->buffer_group.attrs[2], buffer->attrs,
+			sizeof(*&buffer->buffer_group.attrs) * attrcount);
+	buffer->buffer_group.attrs[attrcount+2] = NULL;
+
+	indio_dev->groups[indio_dev->groupcounter++] = &buffer->buffer_group;
+
+	if (buffer->scan_el_attrs != NULL) {
+		attr = buffer->scan_el_attrs->attrs;
+		while (*attr++ != NULL)
+			attrcount_orig++;
 	}
-	bitmap_copy(trialmask, buffer->scan_mask, indio_dev->masklength);
-	set_bit(bit, trialmask);
+	attrcount = attrcount_orig;
+	INIT_LIST_HEAD(&buffer->scan_el_dev_attr_list);
+	channels = indio_dev->channels;
+	if (channels) {
+		/* new magic */
+		for (i = 0; i < indio_dev->num_channels; i++) {
+			if (channels[i].scan_index < 0)
+				continue;
 
-	if (!iio_validate_scan_mask(indio_dev, trialmask))
-		goto err_invalid_mask;
+			/* Establish necessary mask length */
+			if (channels[i].scan_index >
+			    (int)indio_dev->masklength - 1)
+				indio_dev->masklength
+					= channels[i].scan_index + 1;
 
-	if (indio_dev->available_scan_masks) {
-		mask = iio_scan_mask_match(indio_dev->available_scan_masks,
-					   indio_dev->masklength,
-					   trialmask);
-		if (!mask)
-			goto err_invalid_mask;
+			ret = iio_buffer_add_channel_sysfs(indio_dev,
+							 &channels[i]);
+			if (ret < 0)
+				goto error_cleanup_dynamic;
+			attrcount += ret;
+			if (channels[i].type == IIO_TIMESTAMP)
+				indio_dev->scan_index_timestamp =
+					channels[i].scan_index;
+		}
+		if (indio_dev->masklength && buffer->scan_mask == NULL) {
+			buffer->scan_mask = kcalloc(BITS_TO_LONGS(indio_dev->masklength),
+						    sizeof(*buffer->scan_mask),
+						    GFP_KERNEL);
+			if (buffer->scan_mask == NULL) {
+				ret = -ENOMEM;
+				goto error_cleanup_dynamic;
+			}
+		}
 	}
-	bitmap_copy(buffer->scan_mask, trialmask, indio_dev->masklength);
 
-	kfree(trialmask);
+	buffer->scan_el_group.name = iio_scan_elements_group_name;
+
+	buffer->scan_el_group.attrs = kcalloc(attrcount + 1,
+					      sizeof(buffer->scan_el_group.attrs[0]),
+					      GFP_KERNEL);
+	if (buffer->scan_el_group.attrs == NULL) {
+		ret = -ENOMEM;
+		goto error_free_scan_mask;
+	}
+	if (buffer->scan_el_attrs)
+		memcpy(buffer->scan_el_group.attrs, buffer->scan_el_attrs,
+		       sizeof(buffer->scan_el_group.attrs[0])*attrcount_orig);
+	attrn = attrcount_orig;
+
+	list_for_each_entry(p, &buffer->scan_el_dev_attr_list, l)
+		buffer->scan_el_group.attrs[attrn++] = &p->dev_attr.attr;
+	indio_dev->groups[indio_dev->groupcounter++] = &buffer->scan_el_group;
 
 	return 0;
 
-err_invalid_mask:
-	kfree(trialmask);
-	return -EINVAL;
+error_free_scan_mask:
+	kfree(buffer->scan_mask);
+error_cleanup_dynamic:
+	iio_free_chan_devattr_list(&buffer->scan_el_dev_attr_list);
+	kfree(indio_dev->buffer->buffer_group.attrs);
+
+	return ret;
+}
+
+void iio_buffer_free_sysfs_and_mask(struct iio_dev *indio_dev)
+{
+	if (!indio_dev->buffer)
+		return;
+
+	kfree(indio_dev->buffer->scan_mask);
+	kfree(indio_dev->buffer->buffer_group.attrs);
+	kfree(indio_dev->buffer->scan_el_group.attrs);
+	iio_free_chan_devattr_list(&indio_dev->buffer->scan_el_dev_attr_list);
+}
+
+/**
+ * iio_validate_scan_mask_onehot() - Validates that exactly one channel is selected
+ * @indio_dev: the iio device
+ * @mask: scan mask to be checked
+ *
+ * Return true if exactly one bit is set in the scan mask, false otherwise. It
+ * can be used for devices where only one channel can be active for sampling at
+ * a time.
+ */
+bool iio_validate_scan_mask_onehot(struct iio_dev *indio_dev,
+	const unsigned long *mask)
+{
+	return bitmap_weight(mask, indio_dev->masklength) == 1;
 }
-EXPORT_SYMBOL_GPL(iio_scan_mask_set);
+EXPORT_SYMBOL_GPL(iio_validate_scan_mask_onehot);
 
 int iio_scan_mask_query(struct iio_dev *indio_dev,
 			struct iio_buffer *buffer, int bit)
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index af3e76d652ba..69feb912515a 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -70,6 +70,8 @@ static const char * const iio_chan_type_name_spec[] = {
 	[IIO_CCT] = "cct",
 	[IIO_PRESSURE] = "pressure",
 	[IIO_HUMIDITYRELATIVE] = "humidityrelative",
+	[IIO_ACTIVITY] = "activity",
+	[IIO_STEPS] = "steps",
 };
 
 static const char * const iio_modifier_names[] = {
@@ -91,6 +93,10 @@ static const char * const iio_modifier_names[] = {
 	[IIO_MOD_NORTH_TRUE] = "from_north_true",
 	[IIO_MOD_NORTH_MAGN_TILT_COMP] = "from_north_magnetic_tilt_comp",
 	[IIO_MOD_NORTH_TRUE_TILT_COMP] = "from_north_true_tilt_comp",
+	[IIO_MOD_RUNNING] = "running",
+	[IIO_MOD_JOGGING] = "jogging",
+	[IIO_MOD_WALKING] = "walking",
+	[IIO_MOD_STILL] = "still",
 };
 
 /* relies on pairs of these shared then separate */
@@ -113,6 +119,8 @@ static const char * const iio_chan_info_postfix[] = {
 	[IIO_CHAN_INFO_HARDWAREGAIN] = "hardwaregain",
 	[IIO_CHAN_INFO_HYSTERESIS] = "hysteresis",
 	[IIO_CHAN_INFO_INT_TIME] = "integration_time",
+	[IIO_CHAN_INFO_ENABLE] = "en",
+	[IIO_CHAN_INFO_CALIBHEIGHT] = "calibheight",
 };
 
 /**
@@ -1035,7 +1043,6 @@ struct iio_dev *devm_iio_device_alloc(struct device *dev, int sizeof_priv)
 	if (!ptr)
 		return NULL;
 
-	/* use raw alloc_dr for kmalloc caller tracing */
 	iio_dev = iio_device_alloc(sizeof_priv);
 	if (iio_dev) {
 		*ptr = iio_dev;
@@ -1127,6 +1134,29 @@ static const struct file_operations iio_buffer_fileops = {
 	.compat_ioctl = iio_ioctl,
 };
 
+static int iio_check_unique_scan_index(struct iio_dev *indio_dev)
+{
+	int i, j;
+	const struct iio_chan_spec *channels = indio_dev->channels;
+
+	if (!(indio_dev->modes & INDIO_ALL_BUFFER_MODES))
+		return 0;
+
+	for (i = 0; i < indio_dev->num_channels - 1; i++) {
+		if (channels[i].scan_index < 0)
+			continue;
+		for (j = i + 1; j < indio_dev->num_channels; j++)
+			if (channels[i].scan_index == channels[j].scan_index) {
+				dev_err(&indio_dev->dev,
+					"Duplicate scan index %d\n",
+					channels[i].scan_index);
+				return -EINVAL;
+			}
+	}
+
+	return 0;
+}
+
 static const struct iio_buffer_setup_ops noop_ring_setup_ops;
 
 /**
@@ -1141,6 +1171,10 @@ int iio_device_register(struct iio_dev *indio_dev)
 	if (!indio_dev->dev.of_node && indio_dev->dev.parent)
 		indio_dev->dev.of_node = indio_dev->dev.parent->of_node;
 
+	ret = iio_check_unique_scan_index(indio_dev);
+	if (ret < 0)
+		return ret;
+
 	/* configure elements for the chrdev */
 	indio_dev->dev.devt = MKDEV(MAJOR(iio_devt), indio_dev->id);
 
@@ -1150,11 +1184,19 @@ int iio_device_register(struct iio_dev *indio_dev)
 			"Failed to register debugfs interfaces\n");
 		return ret;
 	}
+
+	ret = iio_buffer_alloc_sysfs_and_mask(indio_dev);
+	if (ret) {
+		dev_err(indio_dev->dev.parent,
+			"Failed to create buffer sysfs interfaces\n");
+		goto error_unreg_debugfs;
+	}
+
 	ret = iio_device_register_sysfs(indio_dev);
 	if (ret) {
 		dev_err(indio_dev->dev.parent,
 			"Failed to register sysfs interfaces\n");
-		goto error_unreg_debugfs;
+		goto error_buffer_free_sysfs;
 	}
 	ret = iio_device_register_eventset(indio_dev);
 	if (ret) {
@@ -1187,6 +1229,8 @@ error_unreg_eventset:
 	iio_device_unregister_eventset(indio_dev);
 error_free_sysfs:
 	iio_device_unregister_sysfs(indio_dev);
+error_buffer_free_sysfs:
+	iio_buffer_free_sysfs_and_mask(indio_dev);
 error_unreg_debugfs:
 	iio_device_unregister_debugfs(indio_dev);
 	return ret;
@@ -1215,6 +1259,8 @@ void iio_device_unregister(struct iio_dev *indio_dev)
 	iio_buffer_wakeup_poll(indio_dev);
 
 	mutex_unlock(&indio_dev->info_exist_lock);
+
+	iio_buffer_free_sysfs_and_mask(indio_dev);
 }
 EXPORT_SYMBOL(iio_device_unregister);
 
diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c
index 0c1e37e3120a..3f5cee0295c5 100644
--- a/drivers/iio/industrialio-event.c
+++ b/drivers/iio/industrialio-event.c
@@ -197,6 +197,7 @@ static const char * const iio_ev_type_text[] = {
 	[IIO_EV_TYPE_ROC] = "roc",
 	[IIO_EV_TYPE_THRESH_ADAPTIVE] = "thresh_adaptive",
 	[IIO_EV_TYPE_MAG_ADAPTIVE] = "mag_adaptive",
+	[IIO_EV_TYPE_INSTANCE] = "instance",
 };
 
 static const char * const iio_ev_dir_text[] = {
@@ -327,9 +328,15 @@ static int iio_device_add_event(struct iio_dev *indio_dev,
 	for_each_set_bit(i, mask, sizeof(*mask)*8) {
 		if (i >= ARRAY_SIZE(iio_ev_info_text))
 			return -EINVAL;
-		postfix = kasprintf(GFP_KERNEL, "%s_%s_%s",
-				iio_ev_type_text[type], iio_ev_dir_text[dir],
-				iio_ev_info_text[i]);
+		if (dir != IIO_EV_DIR_NONE)
+			postfix = kasprintf(GFP_KERNEL, "%s_%s_%s",
+					iio_ev_type_text[type],
+					iio_ev_dir_text[dir],
+					iio_ev_info_text[i]);
+		else
+			postfix = kasprintf(GFP_KERNEL, "%s_%s",
+					iio_ev_type_text[type],
+					iio_ev_info_text[i]);
 		if (postfix == NULL)
 			return -ENOMEM;
 
diff --git a/drivers/iio/industrialio-triggered-buffer.c b/drivers/iio/industrialio-triggered-buffer.c
index d6f54930b34a..15a5341b5e7b 100644
--- a/drivers/iio/industrialio-triggered-buffer.c
+++ b/drivers/iio/industrialio-triggered-buffer.c
@@ -32,7 +32,7 @@ static const struct iio_buffer_setup_ops iio_triggered_buffer_setup_ops = {
  *
  * This function combines some common tasks which will normally be performed
  * when setting up a triggered buffer. It will allocate the buffer and the
- * pollfunc, as well as register the buffer with the IIO core.
+ * pollfunc.
  *
  * Before calling this function the indio_dev structure should already be
  * completely initialized, but not yet registered. In practice this means that
@@ -49,7 +49,7 @@ int iio_triggered_buffer_setup(struct iio_dev *indio_dev,
 	struct iio_buffer *buffer;
 	int ret;
 
-	buffer = iio_kfifo_allocate(indio_dev);
+	buffer = iio_kfifo_allocate();
 	if (!buffer) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -78,16 +78,8 @@ int iio_triggered_buffer_setup(struct iio_dev *indio_dev,
 	/* Flag that polled ring buffering is possible */
 	indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
 
-	ret = iio_buffer_register(indio_dev,
-				  indio_dev->channels,
-				  indio_dev->num_channels);
-	if (ret)
-		goto error_dealloc_pollfunc;
-
 	return 0;
 
-error_dealloc_pollfunc:
-	iio_dealloc_pollfunc(indio_dev->pollfunc);
 error_kfifo_free:
 	iio_kfifo_free(indio_dev->buffer);
 error_ret:
@@ -101,7 +93,6 @@ EXPORT_SYMBOL(iio_triggered_buffer_setup);
  */
 void iio_triggered_buffer_cleanup(struct iio_dev *indio_dev)
 {
-	iio_buffer_unregister(indio_dev);
 	iio_dealloc_pollfunc(indio_dev->pollfunc);
 	iio_kfifo_free(indio_dev->buffer);
 }
diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
index 90c8cb727cc7..c8bad3cf891d 100644
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -116,8 +116,11 @@ static int __of_iio_simple_xlate(struct iio_dev *indio_dev,
 	if (!iiospec->args_count)
 		return 0;
 
-	if (iiospec->args[0] >= indio_dev->num_channels)
+	if (iiospec->args[0] >= indio_dev->num_channels) {
+		dev_err(&indio_dev->dev, "invalid channel index %u\n",
+			iiospec->args[0]);
 		return -EINVAL;
+	}
 
 	return iiospec->args[0];
 }
@@ -634,3 +637,28 @@ err_unlock:
 	return ret;
 }
 EXPORT_SYMBOL_GPL(iio_get_channel_type);
+
+static int iio_channel_write(struct iio_channel *chan, int val, int val2,
+			     enum iio_chan_info_enum info)
+{
+	return chan->indio_dev->info->write_raw(chan->indio_dev,
+						chan->channel, val, val2, info);
+}
+
+int iio_write_channel_raw(struct iio_channel *chan, int val)
+{
+	int ret;
+
+	mutex_lock(&chan->indio_dev->info_exist_lock);
+	if (chan->indio_dev->info == NULL) {
+		ret = -ENODEV;
+		goto err_unlock;
+	}
+
+	ret = iio_channel_write(chan, val, 0, IIO_CHAN_INFO_RAW);
+err_unlock:
+	mutex_unlock(&chan->indio_dev->info_exist_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(iio_write_channel_raw);
diff --git a/drivers/iio/kfifo_buf.c b/drivers/iio/kfifo_buf.c
index 7134e8ada09a..b2beea01c49b 100644
--- a/drivers/iio/kfifo_buf.c
+++ b/drivers/iio/kfifo_buf.c
@@ -47,30 +47,6 @@ static int iio_request_update_kfifo(struct iio_buffer *r)
 	return ret;
 }
 
-static int iio_get_length_kfifo(struct iio_buffer *r)
-{
-	return r->length;
-}
-
-static IIO_BUFFER_ENABLE_ATTR;
-static IIO_BUFFER_LENGTH_ATTR;
-
-static struct attribute *iio_kfifo_attributes[] = {
-	&dev_attr_length.attr,
-	&dev_attr_enable.attr,
-	NULL,
-};
-
-static struct attribute_group iio_kfifo_attribute_group = {
-	.attrs = iio_kfifo_attributes,
-	.name = "buffer",
-};
-
-static int iio_get_bytes_per_datum_kfifo(struct iio_buffer *r)
-{
-	return r->bytes_per_datum;
-}
-
 static int iio_mark_update_needed_kfifo(struct iio_buffer *r)
 {
 	struct iio_kfifo *kf = iio_to_kfifo(r);
@@ -159,26 +135,25 @@ static const struct iio_buffer_access_funcs kfifo_access_funcs = {
 	.read_first_n = &iio_read_first_n_kfifo,
 	.data_available = iio_kfifo_buf_data_available,
 	.request_update = &iio_request_update_kfifo,
-	.get_bytes_per_datum = &iio_get_bytes_per_datum_kfifo,
 	.set_bytes_per_datum = &iio_set_bytes_per_datum_kfifo,
-	.get_length = &iio_get_length_kfifo,
 	.set_length = &iio_set_length_kfifo,
 	.release = &iio_kfifo_buffer_release,
 };
 
-struct iio_buffer *iio_kfifo_allocate(struct iio_dev *indio_dev)
+struct iio_buffer *iio_kfifo_allocate(void)
 {
 	struct iio_kfifo *kf;
 
-	kf = kzalloc(sizeof *kf, GFP_KERNEL);
+	kf = kzalloc(sizeof(*kf), GFP_KERNEL);
 	if (!kf)
 		return NULL;
+
 	kf->update_needed = true;
 	iio_buffer_init(&kf->buffer);
-	kf->buffer.attrs = &iio_kfifo_attribute_group;
 	kf->buffer.access = &kfifo_access_funcs;
 	kf->buffer.length = 2;
 	mutex_init(&kf->user_lock);
+
 	return &kf->buffer;
 }
 EXPORT_SYMBOL(iio_kfifo_allocate);
@@ -189,4 +164,58 @@ void iio_kfifo_free(struct iio_buffer *r)
 }
 EXPORT_SYMBOL(iio_kfifo_free);
 
+static void devm_iio_kfifo_release(struct device *dev, void *res)
+{
+	iio_kfifo_free(*(struct iio_buffer **)res);
+}
+
+static int devm_iio_kfifo_match(struct device *dev, void *res, void *data)
+{
+	struct iio_buffer **r = res;
+
+	if (WARN_ON(!r || !*r))
+		return 0;
+
+	return *r == data;
+}
+
+/**
+ * devm_iio_fifo_allocate - Resource-managed iio_kfifo_allocate()
+ * @dev:		Device to allocate kfifo buffer for
+ *
+ * RETURNS:
+ * Pointer to allocated iio_buffer on success, NULL on failure.
+ */
+struct iio_buffer *devm_iio_kfifo_allocate(struct device *dev)
+{
+	struct iio_buffer **ptr, *r;
+
+	ptr = devres_alloc(devm_iio_kfifo_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return NULL;
+
+	r = iio_kfifo_allocate();
+	if (r) {
+		*ptr = r;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return r;
+}
+EXPORT_SYMBOL(devm_iio_kfifo_allocate);
+
+/**
+ * devm_iio_fifo_free - Resource-managed iio_kfifo_free()
+ * @dev:		Device the buffer belongs to
+ * @r:			The buffer associated with the device
+ */
+void devm_iio_kfifo_free(struct device *dev, struct iio_buffer *r)
+{
+	WARN_ON(devres_release(dev, devm_iio_kfifo_release,
+			       devm_iio_kfifo_match, r));
+}
+EXPORT_SYMBOL(devm_iio_kfifo_free);
+
 MODULE_LICENSE("GPL");
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 5bea821adcae..5a3237b2aaa5 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -95,6 +95,9 @@ config HID_SENSOR_ALS
 	  Say yes here to build support for the HID SENSOR
 	  Ambient light sensor.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called hid-sensor-als.
+
 config HID_SENSOR_PROX
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
@@ -109,6 +112,16 @@ config HID_SENSOR_PROX
 	  To compile this driver as a module, choose M here: the
 	  module will be called hid-sensor-prox.
 
+config JSA1212
+	tristate "JSA1212 ALS and proximity sensor driver"
+	depends on I2C
+	help
+	 Say Y here if you want to build a IIO driver for JSA1212
+	 proximity & ALS sensor device.
+
+	 To compile this driver as a module, choose M here:
+	 the module will be called jsa1212.
+
 config SENSORS_LM3533
 	tristate "LM3533 ambient light sensor"
 	depends on MFD_LM3533
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 47877a36cc12..74656c19a899 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_GP2AP020A00F)	+= gp2ap020a00f.o
 obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o
 obj-$(CONFIG_HID_SENSOR_PROX)	+= hid-sensor-prox.o
 obj-$(CONFIG_ISL29125)		+= isl29125.o
+obj-$(CONFIG_JSA1212)		+= jsa1212.o
 obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
 obj-$(CONFIG_LTR501)		+= ltr501.o
 obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
diff --git a/drivers/iio/light/jsa1212.c b/drivers/iio/light/jsa1212.c
new file mode 100644
index 000000000000..29de7e7d9562
--- /dev/null
+++ b/drivers/iio/light/jsa1212.c
@@ -0,0 +1,471 @@
+/*
+ * JSA1212 Ambient Light & Proximity Sensor Driver
+ *
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * JSA1212 I2C slave address: 0x44(ADDR tied to GND), 0x45(ADDR tied to VDD)
+ *
+ * TODO: Interrupt support, thresholds, range support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/acpi.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/* JSA1212 reg address */
+#define JSA1212_CONF_REG		0x01
+#define JSA1212_INT_REG			0x02
+#define JSA1212_PXS_LT_REG		0x03
+#define JSA1212_PXS_HT_REG		0x04
+#define JSA1212_ALS_TH1_REG		0x05
+#define JSA1212_ALS_TH2_REG		0x06
+#define JSA1212_ALS_TH3_REG		0x07
+#define JSA1212_PXS_DATA_REG		0x08
+#define JSA1212_ALS_DT1_REG		0x09
+#define JSA1212_ALS_DT2_REG		0x0A
+#define JSA1212_ALS_RNG_REG		0x0B
+#define JSA1212_MAX_REG			0x0C
+
+/* JSA1212 reg masks */
+#define JSA1212_CONF_MASK		0xFF
+#define JSA1212_INT_MASK		0xFF
+#define JSA1212_PXS_LT_MASK		0xFF
+#define JSA1212_PXS_HT_MASK		0xFF
+#define JSA1212_ALS_TH1_MASK		0xFF
+#define JSA1212_ALS_TH2_LT_MASK		0x0F
+#define JSA1212_ALS_TH2_HT_MASK		0xF0
+#define JSA1212_ALS_TH3_MASK		0xFF
+#define JSA1212_PXS_DATA_MASK		0xFF
+#define JSA1212_ALS_DATA_MASK		0x0FFF
+#define JSA1212_ALS_DT1_MASK		0xFF
+#define JSA1212_ALS_DT2_MASK		0x0F
+#define JSA1212_ALS_RNG_MASK		0x07
+
+/* JSA1212 CONF REG bits */
+#define JSA1212_CONF_PXS_MASK		0x80
+#define JSA1212_CONF_PXS_ENABLE		0x80
+#define JSA1212_CONF_PXS_DISABLE	0x00
+#define JSA1212_CONF_ALS_MASK		0x04
+#define JSA1212_CONF_ALS_ENABLE		0x04
+#define JSA1212_CONF_ALS_DISABLE	0x00
+#define JSA1212_CONF_IRDR_MASK		0x08
+/* Proxmity sensing IRDR current sink settings */
+#define JSA1212_CONF_IRDR_200MA		0x08
+#define JSA1212_CONF_IRDR_100MA		0x00
+#define JSA1212_CONF_PXS_SLP_MASK	0x70
+#define JSA1212_CONF_PXS_SLP_0MS	0x70
+#define JSA1212_CONF_PXS_SLP_12MS	0x60
+#define JSA1212_CONF_PXS_SLP_50MS	0x50
+#define JSA1212_CONF_PXS_SLP_75MS	0x40
+#define JSA1212_CONF_PXS_SLP_100MS	0x30
+#define JSA1212_CONF_PXS_SLP_200MS	0x20
+#define JSA1212_CONF_PXS_SLP_400MS	0x10
+#define JSA1212_CONF_PXS_SLP_800MS	0x00
+
+/* JSA1212 INT REG bits */
+#define JSA1212_INT_CTRL_MASK		0x01
+#define JSA1212_INT_CTRL_EITHER		0x00
+#define JSA1212_INT_CTRL_BOTH		0x01
+#define JSA1212_INT_ALS_PRST_MASK	0x06
+#define JSA1212_INT_ALS_PRST_1CONV	0x00
+#define JSA1212_INT_ALS_PRST_4CONV	0x02
+#define JSA1212_INT_ALS_PRST_8CONV	0x04
+#define JSA1212_INT_ALS_PRST_16CONV	0x06
+#define JSA1212_INT_ALS_FLAG_MASK	0x08
+#define JSA1212_INT_ALS_FLAG_CLR	0x00
+#define JSA1212_INT_PXS_PRST_MASK	0x60
+#define JSA1212_INT_PXS_PRST_1CONV	0x00
+#define JSA1212_INT_PXS_PRST_4CONV	0x20
+#define JSA1212_INT_PXS_PRST_8CONV	0x40
+#define JSA1212_INT_PXS_PRST_16CONV	0x60
+#define JSA1212_INT_PXS_FLAG_MASK	0x80
+#define JSA1212_INT_PXS_FLAG_CLR	0x00
+
+/* JSA1212 ALS RNG REG bits */
+#define JSA1212_ALS_RNG_0_2048		0x00
+#define JSA1212_ALS_RNG_0_1024		0x01
+#define JSA1212_ALS_RNG_0_512		0x02
+#define JSA1212_ALS_RNG_0_256		0x03
+#define JSA1212_ALS_RNG_0_128		0x04
+
+/* JSA1212 INT threshold range */
+#define JSA1212_ALS_TH_MIN	0x0000
+#define JSA1212_ALS_TH_MAX	0x0FFF
+#define JSA1212_PXS_TH_MIN	0x00
+#define JSA1212_PXS_TH_MAX	0xFF
+
+#define JSA1212_ALS_DELAY_MS	200
+#define JSA1212_PXS_DELAY_MS	100
+
+#define JSA1212_DRIVER_NAME	"jsa1212"
+#define JSA1212_REGMAP_NAME	"jsa1212_regmap"
+
+enum jsa1212_op_mode {
+	JSA1212_OPMODE_ALS_EN,
+	JSA1212_OPMODE_PXS_EN,
+};
+
+struct jsa1212_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	u8 als_rng_idx;
+	bool als_en; /* ALS enable status */
+	bool pxs_en; /* proximity enable status */
+	struct regmap *regmap;
+};
+
+/* ALS range idx to val mapping */
+static const int jsa1212_als_range_val[] = {2048, 1024, 512, 256, 128,
+						128, 128, 128};
+
+/* Enables or disables ALS function based on status */
+static int jsa1212_als_enable(struct jsa1212_data *data, u8 status)
+{
+	int ret;
+
+	ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
+				JSA1212_CONF_ALS_MASK,
+				status);
+	if (ret < 0)
+		return ret;
+
+	data->als_en = !!status;
+
+	return 0;
+}
+
+/* Enables or disables PXS function based on status */
+static int jsa1212_pxs_enable(struct jsa1212_data *data, u8 status)
+{
+	int ret;
+
+	ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
+				JSA1212_CONF_PXS_MASK,
+				status);
+	if (ret < 0)
+		return ret;
+
+	data->pxs_en = !!status;
+
+	return 0;
+}
+
+static int jsa1212_read_als_data(struct jsa1212_data *data,
+				unsigned int *val)
+{
+	int ret;
+	__le16 als_data;
+
+	ret = jsa1212_als_enable(data, JSA1212_CONF_ALS_ENABLE);
+	if (ret < 0)
+		return ret;
+
+	/* Delay for data output */
+	msleep(JSA1212_ALS_DELAY_MS);
+
+	/* Read 12 bit data */
+	ret = regmap_bulk_read(data->regmap, JSA1212_ALS_DT1_REG, &als_data, 2);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "als data read err\n");
+		goto als_data_read_err;
+	}
+
+	*val = le16_to_cpu(als_data);
+
+als_data_read_err:
+	return jsa1212_als_enable(data, JSA1212_CONF_ALS_DISABLE);
+}
+
+static int jsa1212_read_pxs_data(struct jsa1212_data *data,
+				unsigned int *val)
+{
+	int ret;
+	unsigned int pxs_data;
+
+	ret = jsa1212_pxs_enable(data, JSA1212_CONF_PXS_ENABLE);
+	if (ret < 0)
+		return ret;
+
+	/* Delay for data output */
+	msleep(JSA1212_PXS_DELAY_MS);
+
+	/* Read out all data */
+	ret = regmap_read(data->regmap, JSA1212_PXS_DATA_REG, &pxs_data);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "pxs data read err\n");
+		goto pxs_data_read_err;
+	}
+
+	*val = pxs_data & JSA1212_PXS_DATA_MASK;
+
+pxs_data_read_err:
+	return jsa1212_pxs_enable(data, JSA1212_CONF_PXS_DISABLE);
+}
+
+static int jsa1212_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	int ret;
+	struct jsa1212_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&data->lock);
+		switch (chan->type) {
+		case IIO_LIGHT:
+			ret = jsa1212_read_als_data(data, val);
+			break;
+		case IIO_PROXIMITY:
+			ret = jsa1212_read_pxs_data(data, val);
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+		mutex_unlock(&data->lock);
+		return ret < 0 ? ret : IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			*val = jsa1212_als_range_val[data->als_rng_idx];
+			*val2 = BIT(12); /* Max 12 bit value */
+			return IIO_VAL_FRACTIONAL;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_chan_spec jsa1212_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE),
+	},
+	{
+		.type = IIO_PROXIMITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	}
+};
+
+static const struct iio_info jsa1212_info = {
+	.driver_module		= THIS_MODULE,
+	.read_raw		= &jsa1212_read_raw,
+};
+
+static int jsa1212_chip_init(struct jsa1212_data *data)
+{
+	int ret;
+
+	ret = regmap_write(data->regmap, JSA1212_CONF_REG,
+				(JSA1212_CONF_PXS_SLP_50MS |
+				JSA1212_CONF_IRDR_200MA));
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(data->regmap, JSA1212_INT_REG,
+				JSA1212_INT_ALS_PRST_4CONV);
+	if (ret < 0)
+		return ret;
+
+	data->als_rng_idx = JSA1212_ALS_RNG_0_2048;
+
+	return 0;
+}
+
+static bool jsa1212_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case JSA1212_PXS_DATA_REG:
+	case JSA1212_ALS_DT1_REG:
+	case JSA1212_ALS_DT2_REG:
+	case JSA1212_INT_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static struct regmap_config jsa1212_regmap_config = {
+	.name =  JSA1212_REGMAP_NAME,
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = JSA1212_MAX_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = jsa1212_is_volatile_reg,
+};
+
+static int jsa1212_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct jsa1212_data *data;
+	struct iio_dev *indio_dev;
+	struct regmap *regmap;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	regmap = devm_regmap_init_i2c(client, &jsa1212_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Regmap initialization failed.\n");
+		return PTR_ERR(regmap);
+	}
+
+	data = iio_priv(indio_dev);
+
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	data->regmap = regmap;
+
+	mutex_init(&data->lock);
+
+	ret = jsa1212_chip_init(data);
+	if (ret < 0)
+		return ret;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->channels = jsa1212_channels;
+	indio_dev->num_channels = ARRAY_SIZE(jsa1212_channels);
+	indio_dev->name = JSA1212_DRIVER_NAME;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	indio_dev->info = &jsa1212_info;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		dev_err(&client->dev, "%s: register device failed\n", __func__);
+
+	return ret;
+}
+
+ /* power off the device */
+static int jsa1212_power_off(struct jsa1212_data *data)
+{
+	int ret;
+
+	mutex_lock(&data->lock);
+
+	ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
+				JSA1212_CONF_ALS_MASK |
+				JSA1212_CONF_PXS_MASK,
+				JSA1212_CONF_ALS_DISABLE |
+				JSA1212_CONF_PXS_DISABLE);
+
+	if (ret < 0)
+		dev_err(&data->client->dev, "power off cmd failed\n");
+
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int jsa1212_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct jsa1212_data *data = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	return jsa1212_power_off(data);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int jsa1212_suspend(struct device *dev)
+{
+	struct jsa1212_data *data;
+
+	data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+
+	return jsa1212_power_off(data);
+}
+
+static int jsa1212_resume(struct device *dev)
+{
+	int ret = 0;
+	struct jsa1212_data *data;
+
+	data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+
+	mutex_lock(&data->lock);
+
+	if (data->als_en) {
+		ret = jsa1212_als_enable(data, JSA1212_CONF_ALS_ENABLE);
+		if (ret < 0) {
+			dev_err(dev, "als resume failed\n");
+			goto unlock_and_ret;
+		}
+	}
+
+	if (data->pxs_en) {
+		ret = jsa1212_pxs_enable(data, JSA1212_CONF_PXS_ENABLE);
+		if (ret < 0)
+			dev_err(dev, "pxs resume failed\n");
+	}
+
+unlock_and_ret:
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(jsa1212_pm_ops, jsa1212_suspend, jsa1212_resume);
+
+#define JSA1212_PM_OPS (&jsa1212_pm_ops)
+#else
+#define JSA1212_PM_OPS NULL
+#endif
+
+static const struct acpi_device_id jsa1212_acpi_match[] = {
+	{"JSA1212", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, jsa1212_acpi_match);
+
+static const struct i2c_device_id jsa1212_id[] = {
+	{ JSA1212_DRIVER_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, jsa1212_id);
+
+static struct i2c_driver jsa1212_driver = {
+	.driver = {
+		.name	= JSA1212_DRIVER_NAME,
+		.pm	= JSA1212_PM_OPS,
+		.owner	= THIS_MODULE,
+		.acpi_match_table = ACPI_PTR(jsa1212_acpi_match),
+	},
+	.probe		= jsa1212_probe,
+	.remove		= jsa1212_remove,
+	.id_table	= jsa1212_id,
+};
+module_i2c_driver(jsa1212_driver);
+
+MODULE_AUTHOR("Sathya Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>");
+MODULE_DESCRIPTION("JSA1212 proximity/ambient light sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c
index ae3c71bdd6c6..076bc46fad03 100644
--- a/drivers/iio/light/lm3533-als.c
+++ b/drivers/iio/light/lm3533-als.c
@@ -657,7 +657,7 @@ static ALS_HYSTERESIS_ATTR_RO(3);
 #define ILLUMINANCE_ATTR_RO(_name) \
 	DEVICE_ATTR(in_illuminance0_##_name, S_IRUGO, show_##_name, NULL)
 #define ILLUMINANCE_ATTR_RW(_name) \
-	DEVICE_ATTR(in_illuminance0_##_name, S_IRUGO | S_IWUSR , \
+	DEVICE_ATTR(in_illuminance0_##_name, S_IRUGO | S_IWUSR, \
 						show_##_name, store_##_name)
 /*
  * ALS Zone threshold-event enable
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index b2dba9e506ab..4c7a4c52dd06 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -6,26 +6,21 @@
 menu "Magnetometer sensors"
 
 config AK8975
-	tristate "Asahi Kasei AK8975 3-Axis Magnetometer"
+	tristate "Asahi Kasei AK 3-Axis Magnetometer"
 	depends on I2C
 	depends on GPIOLIB
 	help
-	  Say yes here to build support for Asahi Kasei AK8975 3-Axis
-	  Magnetometer. This driver can also support AK8963, if i2c
-	  device name is identified as ak8963.
+	  Say yes here to build support for Asahi Kasei AK8975, AK8963,
+	  AK09911 or AK09912 3-Axis Magnetometer.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called ak8975.
 
 config AK09911
 	tristate "Asahi Kasei AK09911 3-axis Compass"
-	depends on I2C
+	select AK8975
 	help
-	  Say yes here to build support for Asahi Kasei AK09911 3-Axis
-	  Magnetometer.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called ak09911.
+	  Deprecated: AK09911 is now supported by AK8975 driver.
 
 config MAG3110
 	tristate "Freescale MAG3110 3-Axis Magnetometer"
diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile
index b91315e0b826..0f5d3c985799 100644
--- a/drivers/iio/magnetometer/Makefile
+++ b/drivers/iio/magnetometer/Makefile
@@ -3,7 +3,6 @@
 #
 
 # When adding new entries keep the list in alphabetical order
-obj-$(CONFIG_AK09911)	+= ak09911.o
 obj-$(CONFIG_AK8975)	+= ak8975.o
 obj-$(CONFIG_MAG3110)	+= mag3110.o
 obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o
diff --git a/drivers/iio/magnetometer/ak09911.c b/drivers/iio/magnetometer/ak09911.c
deleted file mode 100644
index b2bc942ff6b8..000000000000
--- a/drivers/iio/magnetometer/ak09911.c
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * AK09911 3-axis compass driver
- * Copyright (c) 2014, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/acpi.h>
-#include <linux/iio/iio.h>
-
-#define AK09911_REG_WIA1		0x00
-#define AK09911_REG_WIA2		0x01
-#define AK09911_WIA1_VALUE		0x48
-#define AK09911_WIA2_VALUE		0x05
-
-#define AK09911_REG_ST1			0x10
-#define AK09911_REG_HXL			0x11
-#define AK09911_REG_HXH			0x12
-#define AK09911_REG_HYL			0x13
-#define AK09911_REG_HYH			0x14
-#define AK09911_REG_HZL			0x15
-#define AK09911_REG_HZH			0x16
-
-#define AK09911_REG_ASAX		0x60
-#define AK09911_REG_ASAY		0x61
-#define AK09911_REG_ASAZ		0x62
-
-#define AK09911_REG_CNTL1		0x30
-#define AK09911_REG_CNTL2		0x31
-#define AK09911_REG_CNTL3		0x32
-
-#define AK09911_MODE_SNG_MEASURE	0x01
-#define AK09911_MODE_SELF_TEST		0x10
-#define AK09911_MODE_FUSE_ACCESS	0x1F
-#define AK09911_MODE_POWERDOWN		0x00
-#define AK09911_RESET_DATA		0x01
-
-#define AK09911_REG_CNTL1		0x30
-#define AK09911_REG_CNTL2		0x31
-#define AK09911_REG_CNTL3		0x32
-
-#define AK09911_RAW_TO_GAUSS(asa)	((((asa) + 128) * 6000) / 256)
-
-#define AK09911_MAX_CONVERSION_TIMEOUT_MS	500
-#define AK09911_CONVERSION_DONE_POLL_TIME_MS	10
-
-struct ak09911_data {
-	struct i2c_client	*client;
-	struct mutex		lock;
-	u8			asa[3];
-	long			raw_to_gauss[3];
-};
-
-static const int ak09911_index_to_reg[] = {
-	AK09911_REG_HXL, AK09911_REG_HYL, AK09911_REG_HZL,
-};
-
-static int ak09911_set_mode(struct i2c_client *client, u8 mode)
-{
-	int ret;
-
-	switch (mode) {
-	case AK09911_MODE_SNG_MEASURE:
-	case AK09911_MODE_SELF_TEST:
-	case AK09911_MODE_FUSE_ACCESS:
-	case AK09911_MODE_POWERDOWN:
-		ret = i2c_smbus_write_byte_data(client,
-						AK09911_REG_CNTL2, mode);
-		if (ret < 0) {
-			dev_err(&client->dev, "set_mode error\n");
-			return ret;
-		}
-		/* After mode change wait atleast 100us */
-		usleep_range(100, 500);
-		break;
-	default:
-		dev_err(&client->dev,
-			"%s: Unknown mode(%d).", __func__, mode);
-		return -EINVAL;
-	}
-
-	return ret;
-}
-
-/* Get Sensitivity Adjustment value */
-static int ak09911_get_asa(struct i2c_client *client)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct ak09911_data *data = iio_priv(indio_dev);
-	int ret;
-
-	ret = ak09911_set_mode(client, AK09911_MODE_FUSE_ACCESS);
-	if (ret < 0)
-		return ret;
-
-	/* Get asa data and store in the device data. */
-	ret = i2c_smbus_read_i2c_block_data(client, AK09911_REG_ASAX,
-					    3, data->asa);
-	if (ret < 0) {
-		dev_err(&client->dev, "Not able to read asa data\n");
-		return ret;
-	}
-
-	ret = ak09911_set_mode(client,  AK09911_MODE_POWERDOWN);
-	if (ret < 0)
-		return ret;
-
-	data->raw_to_gauss[0] = AK09911_RAW_TO_GAUSS(data->asa[0]);
-	data->raw_to_gauss[1] = AK09911_RAW_TO_GAUSS(data->asa[1]);
-	data->raw_to_gauss[2] = AK09911_RAW_TO_GAUSS(data->asa[2]);
-
-	return 0;
-}
-
-static int ak09911_verify_chip_id(struct i2c_client *client)
-{
-	u8 wia_val[2];
-	int ret;
-
-	ret = i2c_smbus_read_i2c_block_data(client, AK09911_REG_WIA1,
-					    2, wia_val);
-	if (ret < 0) {
-		dev_err(&client->dev, "Error reading WIA\n");
-		return ret;
-	}
-
-	dev_dbg(&client->dev, "WIA %02x %02x\n", wia_val[0], wia_val[1]);
-
-	if (wia_val[0] != AK09911_WIA1_VALUE ||
-		wia_val[1] != AK09911_WIA2_VALUE) {
-		dev_err(&client->dev, "Device ak09911 not found\n");
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-static int wait_conversion_complete_polled(struct ak09911_data *data)
-{
-	struct i2c_client *client = data->client;
-	u8 read_status;
-	u32 timeout_ms = AK09911_MAX_CONVERSION_TIMEOUT_MS;
-	int ret;
-
-	/* Wait for the conversion to complete. */
-	while (timeout_ms) {
-		msleep_interruptible(AK09911_CONVERSION_DONE_POLL_TIME_MS);
-		ret = i2c_smbus_read_byte_data(client, AK09911_REG_ST1);
-		if (ret < 0) {
-			dev_err(&client->dev, "Error in reading ST1\n");
-			return ret;
-		}
-		read_status = ret & 0x01;
-		if (read_status)
-			break;
-		timeout_ms -= AK09911_CONVERSION_DONE_POLL_TIME_MS;
-	}
-	if (!timeout_ms) {
-		dev_err(&client->dev, "Conversion timeout happened\n");
-		return -EIO;
-	}
-
-	return read_status;
-}
-
-static int ak09911_read_axis(struct iio_dev *indio_dev, int index, int *val)
-{
-	struct ak09911_data *data = iio_priv(indio_dev);
-	struct i2c_client *client = data->client;
-	int ret;
-
-	mutex_lock(&data->lock);
-
-	ret = ak09911_set_mode(client, AK09911_MODE_SNG_MEASURE);
-	if (ret < 0)
-		goto fn_exit;
-
-	ret = wait_conversion_complete_polled(data);
-	if (ret < 0)
-		goto fn_exit;
-
-	/* Read data */
-	ret = i2c_smbus_read_word_data(client, ak09911_index_to_reg[index]);
-	if (ret < 0) {
-		dev_err(&client->dev, "Read axis data fails\n");
-		goto fn_exit;
-	}
-
-	mutex_unlock(&data->lock);
-
-	/* Clamp to valid range. */
-	*val = sign_extend32(clamp_t(s16, ret, -8192, 8191), 13);
-
-	return IIO_VAL_INT;
-
-fn_exit:
-	mutex_unlock(&data->lock);
-
-	return ret;
-}
-
-static int ak09911_read_raw(struct iio_dev *indio_dev,
-			    struct iio_chan_spec const *chan,
-			    int *val, int *val2,
-			    long mask)
-{
-	struct ak09911_data *data = iio_priv(indio_dev);
-
-	switch (mask) {
-	case IIO_CHAN_INFO_RAW:
-		return ak09911_read_axis(indio_dev, chan->address, val);
-	case IIO_CHAN_INFO_SCALE:
-		*val = 0;
-		*val2 = data->raw_to_gauss[chan->address];
-		return IIO_VAL_INT_PLUS_MICRO;
-	}
-
-	return -EINVAL;
-}
-
-#define AK09911_CHANNEL(axis, index)					\
-	{								\
-		.type = IIO_MAGN,					\
-		.modified = 1,						\
-		.channel2 = IIO_MOD_##axis,				\
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
-			     BIT(IIO_CHAN_INFO_SCALE),			\
-		.address = index,					\
-	}
-
-static const struct iio_chan_spec ak09911_channels[] = {
-	AK09911_CHANNEL(X, 0), AK09911_CHANNEL(Y, 1), AK09911_CHANNEL(Z, 2),
-};
-
-static const struct iio_info ak09911_info = {
-	.read_raw = &ak09911_read_raw,
-	.driver_module = THIS_MODULE,
-};
-
-static const struct acpi_device_id ak_acpi_match[] = {
-	{"AK009911", 0},
-	{ },
-};
-MODULE_DEVICE_TABLE(acpi, ak_acpi_match);
-
-static int ak09911_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{
-	struct iio_dev *indio_dev;
-	struct ak09911_data *data;
-	const char *name;
-	int ret;
-
-	ret = ak09911_verify_chip_id(client);
-	if (ret) {
-		dev_err(&client->dev, "AK00911 not detected\n");
-		return -ENODEV;
-	}
-
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
-	if (indio_dev == NULL)
-		return -ENOMEM;
-
-	data = iio_priv(indio_dev);
-	i2c_set_clientdata(client, indio_dev);
-
-	data->client = client;
-	mutex_init(&data->lock);
-
-	ret = ak09911_get_asa(client);
-	if (ret)
-		return ret;
-
-	if (id)
-		name = id->name;
-	else if (ACPI_HANDLE(&client->dev))
-		name = dev_name(&client->dev);
-	else
-		return -ENODEV;
-
-	dev_dbg(&client->dev, "Asahi compass chip %s\n", name);
-
-	indio_dev->dev.parent = &client->dev;
-	indio_dev->channels = ak09911_channels;
-	indio_dev->num_channels = ARRAY_SIZE(ak09911_channels);
-	indio_dev->info = &ak09911_info;
-	indio_dev->modes = INDIO_DIRECT_MODE;
-	indio_dev->name = name;
-
-	return devm_iio_device_register(&client->dev, indio_dev);
-}
-
-static const struct i2c_device_id ak09911_id[] = {
-	{"ak09911", 0},
-	{}
-};
-
-MODULE_DEVICE_TABLE(i2c, ak09911_id);
-
-static struct i2c_driver ak09911_driver = {
-	.driver = {
-		.name	= "ak09911",
-		.acpi_match_table = ACPI_PTR(ak_acpi_match),
-	},
-	.probe		= ak09911_probe,
-	.id_table	= ak09911_id,
-};
-module_i2c_driver(ak09911_driver);
-
-MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("AK09911 Compass driver");
diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
index bf5ef077e791..0d10a4baceb6 100644
--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -64,10 +64,10 @@
 #define AK8975_REG_CNTL			0x0A
 #define AK8975_REG_CNTL_MODE_SHIFT	0
 #define AK8975_REG_CNTL_MODE_MASK	(0xF << AK8975_REG_CNTL_MODE_SHIFT)
-#define AK8975_REG_CNTL_MODE_POWER_DOWN	0
-#define AK8975_REG_CNTL_MODE_ONCE	1
-#define AK8975_REG_CNTL_MODE_SELF_TEST	8
-#define AK8975_REG_CNTL_MODE_FUSE_ROM	0xF
+#define AK8975_REG_CNTL_MODE_POWER_DOWN	0x00
+#define AK8975_REG_CNTL_MODE_ONCE	0x01
+#define AK8975_REG_CNTL_MODE_SELF_TEST	0x08
+#define AK8975_REG_CNTL_MODE_FUSE_ROM	0x0F
 
 #define AK8975_REG_RSVC			0x0B
 #define AK8975_REG_ASTC			0x0C
@@ -81,18 +81,278 @@
 #define AK8975_MAX_REGS			AK8975_REG_ASAZ
 
 /*
+ * AK09912 Register definitions
+ */
+#define AK09912_REG_WIA1		0x00
+#define AK09912_REG_WIA2		0x01
+#define AK09912_DEVICE_ID		0x04
+#define AK09911_DEVICE_ID		0x05
+
+#define AK09911_REG_INFO1		0x02
+#define AK09911_REG_INFO2		0x03
+
+#define AK09912_REG_ST1			0x10
+
+#define AK09912_REG_ST1_DRDY_SHIFT	0
+#define AK09912_REG_ST1_DRDY_MASK	(1 << AK09912_REG_ST1_DRDY_SHIFT)
+
+#define AK09912_REG_HXL			0x11
+#define AK09912_REG_HXH			0x12
+#define AK09912_REG_HYL			0x13
+#define AK09912_REG_HYH			0x14
+#define AK09912_REG_HZL			0x15
+#define AK09912_REG_HZH			0x16
+#define AK09912_REG_TMPS		0x17
+
+#define AK09912_REG_ST2			0x18
+#define AK09912_REG_ST2_HOFL_SHIFT	3
+#define AK09912_REG_ST2_HOFL_MASK	(1 << AK09912_REG_ST2_HOFL_SHIFT)
+
+#define AK09912_REG_CNTL1		0x30
+
+#define AK09912_REG_CNTL2		0x31
+#define AK09912_REG_CNTL_MODE_POWER_DOWN	0x00
+#define AK09912_REG_CNTL_MODE_ONCE	0x01
+#define AK09912_REG_CNTL_MODE_SELF_TEST	0x10
+#define AK09912_REG_CNTL_MODE_FUSE_ROM	0x1F
+#define AK09912_REG_CNTL2_MODE_SHIFT	0
+#define AK09912_REG_CNTL2_MODE_MASK	(0x1F << AK09912_REG_CNTL2_MODE_SHIFT)
+
+#define AK09912_REG_CNTL3		0x32
+
+#define AK09912_REG_TS1			0x33
+#define AK09912_REG_TS2			0x34
+#define AK09912_REG_TS3			0x35
+#define AK09912_REG_I2CDIS		0x36
+#define AK09912_REG_TS4			0x37
+
+#define AK09912_REG_ASAX		0x60
+#define AK09912_REG_ASAY		0x61
+#define AK09912_REG_ASAZ		0x62
+
+#define AK09912_MAX_REGS		AK09912_REG_ASAZ
+
+/*
  * Miscellaneous values.
  */
 #define AK8975_MAX_CONVERSION_TIMEOUT	500
 #define AK8975_CONVERSION_DONE_POLL_TIME 10
 #define AK8975_DATA_READY_TIMEOUT	((100*HZ)/1000)
-#define RAW_TO_GAUSS_8975(asa) ((((asa) + 128) * 3000) / 256)
-#define RAW_TO_GAUSS_8963(asa) ((((asa) + 128) * 6000) / 256)
+
+/*
+ * Precalculate scale factor (in Gauss units) for each axis and
+ * store in the device data.
+ *
+ * This scale factor is axis-dependent, and is derived from 3 calibration
+ * factors ASA(x), ASA(y), and ASA(z).
+ *
+ * These ASA values are read from the sensor device at start of day, and
+ * cached in the device context struct.
+ *
+ * Adjusting the flux value with the sensitivity adjustment value should be
+ * done via the following formula:
+ *
+ * Hadj = H * ( ( ( (ASA-128)*0.5 ) / 128 ) + 1 )
+ * where H is the raw value, ASA is the sensitivity adjustment, and Hadj
+ * is the resultant adjusted value.
+ *
+ * We reduce the formula to:
+ *
+ * Hadj = H * (ASA + 128) / 256
+ *
+ * H is in the range of -4096 to 4095.  The magnetometer has a range of
+ * +-1229uT.  To go from the raw value to uT is:
+ *
+ * HuT = H * 1229/4096, or roughly, 3/10.
+ *
+ * Since 1uT = 0.01 gauss, our final scale factor becomes:
+ *
+ * Hadj = H * ((ASA + 128) / 256) * 3/10 * 1/100
+ * Hadj = H * ((ASA + 128) * 0.003) / 256
+ *
+ * Since ASA doesn't change, we cache the resultant scale factor into the
+ * device context in ak8975_setup().
+ *
+ * Given we use IIO_VAL_INT_PLUS_MICRO bit when displaying the scale, we
+ * multiply the stored scale value by 1e6.
+ */
+static long ak8975_raw_to_gauss(u16 data)
+{
+	return (((long)data + 128) * 3000) / 256;
+}
+
+/*
+ * For AK8963 and AK09911, same calculation, but the device is less sensitive:
+ *
+ * H is in the range of +-8190.  The magnetometer has a range of
+ * +-4912uT.  To go from the raw value to uT is:
+ *
+ * HuT = H * 4912/8190, or roughly, 6/10, instead of 3/10.
+ */
+
+static long ak8963_09911_raw_to_gauss(u16 data)
+{
+	return (((long)data + 128) * 6000) / 256;
+}
+
+/*
+ * For AK09912, same calculation, except the device is more sensitive:
+ *
+ * H is in the range of -32752 to 32752.  The magnetometer has a range of
+ * +-4912uT.  To go from the raw value to uT is:
+ *
+ * HuT = H * 4912/32752, or roughly, 3/20, instead of 3/10.
+ */
+static long ak09912_raw_to_gauss(u16 data)
+{
+	return (((long)data + 128) * 1500) / 256;
+}
 
 /* Compatible Asahi Kasei Compass parts */
 enum asahi_compass_chipset {
 	AK8975,
 	AK8963,
+	AK09911,
+	AK09912,
+	AK_MAX_TYPE
+};
+
+enum ak_ctrl_reg_addr {
+	ST1,
+	ST2,
+	CNTL,
+	ASA_BASE,
+	MAX_REGS,
+	REGS_END,
+};
+
+enum ak_ctrl_reg_mask {
+	ST1_DRDY,
+	ST2_HOFL,
+	ST2_DERR,
+	CNTL_MODE,
+	MASK_END,
+};
+
+enum ak_ctrl_mode {
+	POWER_DOWN,
+	MODE_ONCE,
+	SELF_TEST,
+	FUSE_ROM,
+	MODE_END,
+};
+
+struct ak_def {
+	enum asahi_compass_chipset type;
+	long (*raw_to_gauss)(u16 data);
+	u16 range;
+	u8 ctrl_regs[REGS_END];
+	u8 ctrl_masks[MASK_END];
+	u8 ctrl_modes[MODE_END];
+	u8 data_regs[3];
+};
+
+static struct ak_def ak_def_array[AK_MAX_TYPE] = {
+	{
+		.type = AK8975,
+		.raw_to_gauss = ak8975_raw_to_gauss,
+		.range = 4096,
+		.ctrl_regs = {
+			AK8975_REG_ST1,
+			AK8975_REG_ST2,
+			AK8975_REG_CNTL,
+			AK8975_REG_ASAX,
+			AK8975_MAX_REGS},
+		.ctrl_masks = {
+			AK8975_REG_ST1_DRDY_MASK,
+			AK8975_REG_ST2_HOFL_MASK,
+			AK8975_REG_ST2_DERR_MASK,
+			AK8975_REG_CNTL_MODE_MASK},
+		.ctrl_modes = {
+			AK8975_REG_CNTL_MODE_POWER_DOWN,
+			AK8975_REG_CNTL_MODE_ONCE,
+			AK8975_REG_CNTL_MODE_SELF_TEST,
+			AK8975_REG_CNTL_MODE_FUSE_ROM},
+		.data_regs = {
+			AK8975_REG_HXL,
+			AK8975_REG_HYL,
+			AK8975_REG_HZL},
+	},
+	{
+		.type = AK8963,
+		.raw_to_gauss = ak8963_09911_raw_to_gauss,
+		.range = 8190,
+		.ctrl_regs = {
+			AK8975_REG_ST1,
+			AK8975_REG_ST2,
+			AK8975_REG_CNTL,
+			AK8975_REG_ASAX,
+			AK8975_MAX_REGS},
+		.ctrl_masks = {
+			AK8975_REG_ST1_DRDY_MASK,
+			AK8975_REG_ST2_HOFL_MASK,
+			0,
+			AK8975_REG_CNTL_MODE_MASK},
+		.ctrl_modes = {
+			AK8975_REG_CNTL_MODE_POWER_DOWN,
+			AK8975_REG_CNTL_MODE_ONCE,
+			AK8975_REG_CNTL_MODE_SELF_TEST,
+			AK8975_REG_CNTL_MODE_FUSE_ROM},
+		.data_regs = {
+			AK8975_REG_HXL,
+			AK8975_REG_HYL,
+			AK8975_REG_HZL},
+	},
+	{
+		.type = AK09911,
+		.raw_to_gauss = ak8963_09911_raw_to_gauss,
+		.range = 8192,
+		.ctrl_regs = {
+			AK09912_REG_ST1,
+			AK09912_REG_ST2,
+			AK09912_REG_CNTL2,
+			AK09912_REG_ASAX,
+			AK09912_MAX_REGS},
+		.ctrl_masks = {
+			AK09912_REG_ST1_DRDY_MASK,
+			AK09912_REG_ST2_HOFL_MASK,
+			0,
+			AK09912_REG_CNTL2_MODE_MASK},
+		.ctrl_modes = {
+			AK09912_REG_CNTL_MODE_POWER_DOWN,
+			AK09912_REG_CNTL_MODE_ONCE,
+			AK09912_REG_CNTL_MODE_SELF_TEST,
+			AK09912_REG_CNTL_MODE_FUSE_ROM},
+		.data_regs = {
+			AK09912_REG_HXL,
+			AK09912_REG_HYL,
+			AK09912_REG_HZL},
+	},
+	{
+		.type = AK09912,
+		.raw_to_gauss = ak09912_raw_to_gauss,
+		.range = 32752,
+		.ctrl_regs = {
+			AK09912_REG_ST1,
+			AK09912_REG_ST2,
+			AK09912_REG_CNTL2,
+			AK09912_REG_ASAX,
+			AK09912_MAX_REGS},
+		.ctrl_masks = {
+			AK09912_REG_ST1_DRDY_MASK,
+			AK09912_REG_ST2_HOFL_MASK,
+			0,
+			AK09912_REG_CNTL2_MODE_MASK},
+		.ctrl_modes = {
+			AK09912_REG_CNTL_MODE_POWER_DOWN,
+			AK09912_REG_CNTL_MODE_ONCE,
+			AK09912_REG_CNTL_MODE_SELF_TEST,
+			AK09912_REG_CNTL_MODE_FUSE_ROM},
+		.data_regs = {
+			AK09912_REG_HXL,
+			AK09912_REG_HYL,
+			AK09912_REG_HZL},
+	}
 };
 
 /*
@@ -100,40 +360,82 @@ enum asahi_compass_chipset {
  */
 struct ak8975_data {
 	struct i2c_client	*client;
+	struct ak_def		*def;
 	struct attribute_group	attrs;
 	struct mutex		lock;
 	u8			asa[3];
 	long			raw_to_gauss[3];
-	u8			reg_cache[AK8975_MAX_REGS];
 	int			eoc_gpio;
 	int			eoc_irq;
 	wait_queue_head_t	data_ready_queue;
 	unsigned long		flags;
-	enum asahi_compass_chipset chipset;
+	u8			cntl_cache;
 };
 
-static const int ak8975_index_to_reg[] = {
-	AK8975_REG_HXL, AK8975_REG_HYL, AK8975_REG_HZL,
-};
+/*
+ * Return 0 if the i2c device is the one we expect.
+ * return a negative error number otherwise
+ */
+static int ak8975_who_i_am(struct i2c_client *client,
+			   enum asahi_compass_chipset type)
+{
+	u8 wia_val[2];
+	int ret;
+
+	/*
+	 * Signature for each device:
+	 * Device   |  WIA1      |  WIA2
+	 * AK09912  |  DEVICE_ID |  AK09912_DEVICE_ID
+	 * AK09911  |  DEVICE_ID |  AK09911_DEVICE_ID
+	 * AK8975   |  DEVICE_ID |  NA
+	 * AK8963   |  DEVICE_ID |  NA
+	 */
+	ret = i2c_smbus_read_i2c_block_data(client, AK09912_REG_WIA1,
+					    2, wia_val);
+	if (ret < 0) {
+		dev_err(&client->dev, "Error reading WIA\n");
+		return ret;
+	}
+
+	if (wia_val[0] != AK8975_DEVICE_ID)
+		return -ENODEV;
+
+	switch (type) {
+	case AK8975:
+	case AK8963:
+		return 0;
+	case AK09911:
+		if (wia_val[1] == AK09911_DEVICE_ID)
+			return 0;
+		break;
+	case AK09912:
+		if (wia_val[1] == AK09912_DEVICE_ID)
+			return 0;
+		break;
+	default:
+		dev_err(&client->dev, "Type %d unknown\n", type);
+	}
+	return -ENODEV;
+}
 
 /*
- * Helper function to write to the I2C device's registers.
+ * Helper function to write to CNTL register.
  */
-static int ak8975_write_data(struct i2c_client *client,
-			     u8 reg, u8 val, u8 mask, u8 shift)
+static int ak8975_set_mode(struct ak8975_data *data, enum ak_ctrl_mode mode)
 {
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct ak8975_data *data = iio_priv(indio_dev);
 	u8 regval;
 	int ret;
 
-	regval = (data->reg_cache[reg] & ~mask) | (val << shift);
-	ret = i2c_smbus_write_byte_data(client, reg, regval);
+	regval = (data->cntl_cache & ~data->def->ctrl_masks[CNTL_MODE]) |
+		 data->def->ctrl_modes[mode];
+	ret = i2c_smbus_write_byte_data(data->client,
+					data->def->ctrl_regs[CNTL], regval);
 	if (ret < 0) {
-		dev_err(&client->dev, "Write to device fails status %x\n", ret);
 		return ret;
 	}
-	data->reg_cache[reg] = regval;
+	data->cntl_cache = regval;
+	/* After mode change wait atleast 100us */
+	usleep_range(100, 500);
 
 	return 0;
 }
@@ -166,8 +468,8 @@ static int ak8975_setup_irq(struct ak8975_data *data)
 		irq = gpio_to_irq(data->eoc_gpio);
 
 	rc = devm_request_irq(&client->dev, irq, ak8975_irq_handler,
-			 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
-			 dev_name(&client->dev), data);
+			      IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+			      dev_name(&client->dev), data);
 	if (rc < 0) {
 		dev_err(&client->dev,
 			"irq %d request failed, (gpio %d): %d\n",
@@ -191,34 +493,18 @@ static int ak8975_setup(struct i2c_client *client)
 {
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	struct ak8975_data *data = iio_priv(indio_dev);
-	u8 device_id;
 	int ret;
 
-	/* Confirm that the device we're talking to is really an AK8975. */
-	ret = i2c_smbus_read_byte_data(client, AK8975_REG_WIA);
-	if (ret < 0) {
-		dev_err(&client->dev, "Error reading WIA\n");
-		return ret;
-	}
-	device_id = ret;
-	if (device_id != AK8975_DEVICE_ID) {
-		dev_err(&client->dev, "Device ak8975 not found\n");
-		return -ENODEV;
-	}
-
 	/* Write the fused rom access mode. */
-	ret = ak8975_write_data(client,
-				AK8975_REG_CNTL,
-				AK8975_REG_CNTL_MODE_FUSE_ROM,
-				AK8975_REG_CNTL_MODE_MASK,
-				AK8975_REG_CNTL_MODE_SHIFT);
+	ret = ak8975_set_mode(data, FUSE_ROM);
 	if (ret < 0) {
 		dev_err(&client->dev, "Error in setting fuse access mode\n");
 		return ret;
 	}
 
 	/* Get asa data and store in the device data. */
-	ret = i2c_smbus_read_i2c_block_data(client, AK8975_REG_ASAX,
+	ret = i2c_smbus_read_i2c_block_data(client,
+					    data->def->ctrl_regs[ASA_BASE],
 					    3, data->asa);
 	if (ret < 0) {
 		dev_err(&client->dev, "Not able to read asa data\n");
@@ -226,13 +512,13 @@ static int ak8975_setup(struct i2c_client *client)
 	}
 
 	/* After reading fuse ROM data set power-down mode */
-	ret = ak8975_write_data(client,
-				AK8975_REG_CNTL,
-				AK8975_REG_CNTL_MODE_POWER_DOWN,
-				AK8975_REG_CNTL_MODE_MASK,
-				AK8975_REG_CNTL_MODE_SHIFT);
+	ret = ak8975_set_mode(data, POWER_DOWN);
+	if (ret < 0) {
+		dev_err(&client->dev, "Error in setting power-down mode\n");
+		return ret;
+	}
 
-	if (data->eoc_gpio > 0 || client->irq) {
+	if (data->eoc_gpio > 0 || client->irq > 0) {
 		ret = ak8975_setup_irq(data);
 		if (ret < 0) {
 			dev_err(&client->dev,
@@ -241,61 +527,9 @@ static int ak8975_setup(struct i2c_client *client)
 		}
 	}
 
-	if (ret < 0) {
-		dev_err(&client->dev, "Error in setting power-down mode\n");
-		return ret;
-	}
-
-/*
- * Precalculate scale factor (in Gauss units) for each axis and
- * store in the device data.
- *
- * This scale factor is axis-dependent, and is derived from 3 calibration
- * factors ASA(x), ASA(y), and ASA(z).
- *
- * These ASA values are read from the sensor device at start of day, and
- * cached in the device context struct.
- *
- * Adjusting the flux value with the sensitivity adjustment value should be
- * done via the following formula:
- *
- * Hadj = H * ( ( ( (ASA-128)*0.5 ) / 128 ) + 1 )
- *
- * where H is the raw value, ASA is the sensitivity adjustment, and Hadj
- * is the resultant adjusted value.
- *
- * We reduce the formula to:
- *
- * Hadj = H * (ASA + 128) / 256
- *
- * H is in the range of -4096 to 4095.  The magnetometer has a range of
- * +-1229uT.  To go from the raw value to uT is:
- *
- * HuT = H * 1229/4096, or roughly, 3/10.
- *
- * Since 1uT = 0.01 gauss, our final scale factor becomes:
- *
- * Hadj = H * ((ASA + 128) / 256) * 3/10 * 1/100
- * Hadj = H * ((ASA + 128) * 0.003) / 256
- *
- * Since ASA doesn't change, we cache the resultant scale factor into the
- * device context in ak8975_setup().
- */
-	if (data->chipset == AK8963) {
-		/*
-		 * H range is +-8190 and magnetometer range is +-4912.
-		 * So HuT using the above explanation for 8975,
-		 * 4912/8190 = ~ 6/10.
-		 * So the Hadj should use 6/10 instead of 3/10.
-		 */
-		data->raw_to_gauss[0] = RAW_TO_GAUSS_8963(data->asa[0]);
-		data->raw_to_gauss[1] = RAW_TO_GAUSS_8963(data->asa[1]);
-		data->raw_to_gauss[2] = RAW_TO_GAUSS_8963(data->asa[2]);
-	} else {
-		data->raw_to_gauss[0] = RAW_TO_GAUSS_8975(data->asa[0]);
-		data->raw_to_gauss[1] = RAW_TO_GAUSS_8975(data->asa[1]);
-		data->raw_to_gauss[2] = RAW_TO_GAUSS_8975(data->asa[2]);
-	}
+	data->raw_to_gauss[0] = data->def->raw_to_gauss(data->asa[0]);
+	data->raw_to_gauss[1] = data->def->raw_to_gauss(data->asa[1]);
+	data->raw_to_gauss[2] = data->def->raw_to_gauss(data->asa[2]);
 
 	return 0;
 }
@@ -318,7 +552,7 @@ static int wait_conversion_complete_gpio(struct ak8975_data *data)
 		return -EINVAL;
 	}
 
-	ret = i2c_smbus_read_byte_data(client, AK8975_REG_ST1);
+	ret = i2c_smbus_read_byte_data(client, data->def->ctrl_regs[ST1]);
 	if (ret < 0)
 		dev_err(&client->dev, "Error in reading ST1\n");
 
@@ -335,7 +569,8 @@ static int wait_conversion_complete_polled(struct ak8975_data *data)
 	/* Wait for the conversion to complete. */
 	while (timeout_ms) {
 		msleep(AK8975_CONVERSION_DONE_POLL_TIME);
-		ret = i2c_smbus_read_byte_data(client, AK8975_REG_ST1);
+		ret = i2c_smbus_read_byte_data(client,
+					       data->def->ctrl_regs[ST1]);
 		if (ret < 0) {
 			dev_err(&client->dev, "Error in reading ST1\n");
 			return ret;
@@ -378,11 +613,7 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val)
 	mutex_lock(&data->lock);
 
 	/* Set up the device for taking a sample. */
-	ret = ak8975_write_data(client,
-				AK8975_REG_CNTL,
-				AK8975_REG_CNTL_MODE_ONCE,
-				AK8975_REG_CNTL_MODE_MASK,
-				AK8975_REG_CNTL_MODE_SHIFT);
+	ret = ak8975_set_mode(data, MODE_ONCE);
 	if (ret < 0) {
 		dev_err(&client->dev, "Error in setting operating mode\n");
 		goto exit;
@@ -399,14 +630,15 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val)
 		goto exit;
 
 	/* This will be executed only for non-interrupt based waiting case */
-	if (ret & AK8975_REG_ST1_DRDY_MASK) {
-		ret = i2c_smbus_read_byte_data(client, AK8975_REG_ST2);
+	if (ret & data->def->ctrl_masks[ST1_DRDY]) {
+		ret = i2c_smbus_read_byte_data(client,
+					       data->def->ctrl_regs[ST2]);
 		if (ret < 0) {
 			dev_err(&client->dev, "Error in reading ST2\n");
 			goto exit;
 		}
-		if (ret & (AK8975_REG_ST2_DERR_MASK |
-			   AK8975_REG_ST2_HOFL_MASK)) {
+		if (ret & (data->def->ctrl_masks[ST2_DERR] |
+			   data->def->ctrl_masks[ST2_HOFL])) {
 			dev_err(&client->dev, "ST2 status error 0x%x\n", ret);
 			ret = -EINVAL;
 			goto exit;
@@ -415,7 +647,7 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val)
 
 	/* Read the flux value from the appropriate register
 	   (the register is specified in the iio device attributes). */
-	ret = i2c_smbus_read_word_data(client, ak8975_index_to_reg[index]);
+	ret = i2c_smbus_read_word_data(client, data->def->data_regs[index]);
 	if (ret < 0) {
 		dev_err(&client->dev, "Read axis data fails\n");
 		goto exit;
@@ -424,7 +656,7 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val)
 	mutex_unlock(&data->lock);
 
 	/* Clamp to valid range. */
-	*val = clamp_t(s16, ret, -4096, 4095);
+	*val = clamp_t(s16, ret, -data->def->range, data->def->range);
 	return IIO_VAL_INT;
 
 exit:
@@ -473,6 +705,8 @@ static const struct acpi_device_id ak_acpi_match[] = {
 	{"AK8975", AK8975},
 	{"AK8963", AK8963},
 	{"INVN6500", AK8963},
+	{"AK09911", AK09911},
+	{"AK09912", AK09912},
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, ak_acpi_match);
@@ -498,6 +732,7 @@ static int ak8975_probe(struct i2c_client *client,
 	int eoc_gpio;
 	int err;
 	const char *name = NULL;
+	enum asahi_compass_chipset chipset;
 
 	/* Grab and set up the supplied GPIO. */
 	if (client->dev.platform_data)
@@ -537,42 +772,49 @@ static int ak8975_probe(struct i2c_client *client,
 
 	/* id will be NULL when enumerated via ACPI */
 	if (id) {
-		data->chipset =
-			(enum asahi_compass_chipset)(id->driver_data);
+		chipset = (enum asahi_compass_chipset)(id->driver_data);
 		name = id->name;
 	} else if (ACPI_HANDLE(&client->dev))
-		name = ak8975_match_acpi_device(&client->dev, &data->chipset);
+		name = ak8975_match_acpi_device(&client->dev, &chipset);
 	else
 		return -ENOSYS;
 
+	if (chipset >= AK_MAX_TYPE) {
+		dev_err(&client->dev, "AKM device type unsupported: %d\n",
+			chipset);
+		return -ENODEV;
+	}
+
+	data->def = &ak_def_array[chipset];
+	err = ak8975_who_i_am(client, data->def->type);
+	if (err < 0) {
+		dev_err(&client->dev, "Unexpected device\n");
+		return err;
+	}
 	dev_dbg(&client->dev, "Asahi compass chip %s\n", name);
 
 	/* Perform some basic start-of-day setup of the device. */
 	err = ak8975_setup(client);
 	if (err < 0) {
-		dev_err(&client->dev, "AK8975 initialization fails\n");
+		dev_err(&client->dev, "%s initialization fails\n", name);
 		return err;
 	}
 
-	data->client = client;
 	mutex_init(&data->lock);
-	data->eoc_gpio = eoc_gpio;
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->channels = ak8975_channels;
 	indio_dev->num_channels = ARRAY_SIZE(ak8975_channels);
 	indio_dev->info = &ak8975_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->name = name;
-	err = devm_iio_device_register(&client->dev, indio_dev);
-	if (err < 0)
-		return err;
-
-	return 0;
+	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
 static const struct i2c_device_id ak8975_id[] = {
 	{"ak8975", AK8975},
 	{"ak8963", AK8963},
+	{"ak09911", AK09911},
+	{"ak09912", AK09912},
 	{}
 };
 
@@ -581,14 +823,20 @@ MODULE_DEVICE_TABLE(i2c, ak8975_id);
 static const struct of_device_id ak8975_of_match[] = {
 	{ .compatible = "asahi-kasei,ak8975", },
 	{ .compatible = "ak8975", },
-	{ }
+	{ .compatible = "asahi-kasei,ak8963", },
+	{ .compatible = "ak8963", },
+	{ .compatible = "asahi-kasei,ak09911", },
+	{ .compatible = "ak09911", },
+	{ .compatible = "asahi-kasei,ak09912", },
+	{ .compatible = "ak09912", },
+	{}
 };
 MODULE_DEVICE_TABLE(of, ak8975_of_match);
 
 static struct i2c_driver ak8975_driver = {
 	.driver = {
 		.name	= "ak8975",
-		.of_match_table = ak8975_of_match,
+		.of_match_table = of_match_ptr(ak8975_of_match),
 		.acpi_match_table = ACPI_PTR(ak_acpi_match),
 	},
 	.probe		= ak8975_probe,
diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280.c
index 75038dacfff1..7c623e2bd633 100644
--- a/drivers/iio/pressure/bmp280.c
+++ b/drivers/iio/pressure/bmp280.c
@@ -80,16 +80,12 @@ struct bmp280_data {
 	s32 t_fine;
 };
 
-/* Compensation parameters. */
-struct bmp280_comp_temp {
-	u16 dig_t1;
-	s16 dig_t2, dig_t3;
-};
-
-struct bmp280_comp_press {
-	u16 dig_p1;
-	s16 dig_p2, dig_p3, dig_p4, dig_p5, dig_p6, dig_p7, dig_p8, dig_p9;
-};
+/*
+ * These enums are used for indexing into the array of compensation
+ * parameters.
+ */
+enum { T1, T2, T3 };
+enum { P1, P2, P3, P4, P5, P6, P7, P8, P9 };
 
 static const struct iio_chan_spec bmp280_channels[] = {
 	{
@@ -141,54 +137,6 @@ static const struct regmap_config bmp280_regmap_config = {
 	.volatile_reg = bmp280_is_volatile_reg,
 };
 
-static int bmp280_read_compensation_temp(struct bmp280_data *data,
-					 struct bmp280_comp_temp *comp)
-{
-	int ret;
-	__le16 buf[BMP280_COMP_TEMP_REG_COUNT / 2];
-
-	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_TEMP_START,
-			       buf, BMP280_COMP_TEMP_REG_COUNT);
-	if (ret < 0) {
-		dev_err(&data->client->dev,
-			"failed to read temperature calibration parameters\n");
-		return ret;
-	}
-
-	comp->dig_t1 = (u16) le16_to_cpu(buf[0]);
-	comp->dig_t2 = (s16) le16_to_cpu(buf[1]);
-	comp->dig_t3 = (s16) le16_to_cpu(buf[2]);
-
-	return 0;
-}
-
-static int bmp280_read_compensation_press(struct bmp280_data *data,
-					  struct bmp280_comp_press *comp)
-{
-	int ret;
-	__le16 buf[BMP280_COMP_PRESS_REG_COUNT / 2];
-
-	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_PRESS_START,
-			       buf, BMP280_COMP_PRESS_REG_COUNT);
-	if (ret < 0) {
-		dev_err(&data->client->dev,
-			"failed to read pressure calibration parameters\n");
-		return ret;
-	}
-
-	comp->dig_p1 = (u16) le16_to_cpu(buf[0]);
-	comp->dig_p2 = (s16) le16_to_cpu(buf[1]);
-	comp->dig_p3 = (s16) le16_to_cpu(buf[2]);
-	comp->dig_p4 = (s16) le16_to_cpu(buf[3]);
-	comp->dig_p5 = (s16) le16_to_cpu(buf[4]);
-	comp->dig_p6 = (s16) le16_to_cpu(buf[5]);
-	comp->dig_p7 = (s16) le16_to_cpu(buf[6]);
-	comp->dig_p8 = (s16) le16_to_cpu(buf[7]);
-	comp->dig_p9 = (s16) le16_to_cpu(buf[8]);
-
-	return 0;
-}
-
 /*
  * Returns temperature in DegC, resolution is 0.01 DegC.  Output value of
  * "5123" equals 51.23 DegC.  t_fine carries fine temperature as global
@@ -197,21 +145,35 @@ static int bmp280_read_compensation_press(struct bmp280_data *data,
  * Taken from datasheet, Section 3.11.3, "Compensation formula".
  */
 static s32 bmp280_compensate_temp(struct bmp280_data *data,
-				  struct bmp280_comp_temp *comp,
 				  s32 adc_temp)
 {
-	s32 var1, var2, t;
+	int ret;
+	s32 var1, var2;
+	__le16 buf[BMP280_COMP_TEMP_REG_COUNT / 2];
 
-	var1 = (((adc_temp >> 3) - ((s32) comp->dig_t1 << 1)) *
-		((s32) comp->dig_t2)) >> 11;
-	var2 = (((((adc_temp >> 4) - ((s32) comp->dig_t1)) *
-		  ((adc_temp >> 4) - ((s32) comp->dig_t1))) >> 12) *
-		((s32) comp->dig_t3)) >> 14;
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_TEMP_START,
+			       buf, BMP280_COMP_TEMP_REG_COUNT);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"failed to read temperature calibration parameters\n");
+		return ret;
+	}
 
-	data->t_fine = var1 + var2;
-	t = (data->t_fine * 5 + 128) >> 8;
+	/*
+	 * The double casts are necessary because le16_to_cpu returns an
+	 * unsigned 16-bit value.  Casting that value directly to a
+	 * signed 32-bit will not do proper sign extension.
+	 *
+	 * Conversely, T1 and P1 are unsigned values, so they can be
+	 * cast straight to the larger type.
+	 */
+	var1 = (((adc_temp >> 3) - ((s32)le16_to_cpu(buf[T1]) << 1)) *
+		((s32)(s16)le16_to_cpu(buf[T2]))) >> 11;
+	var2 = (((((adc_temp >> 4) - ((s32)le16_to_cpu(buf[T1]))) *
+		  ((adc_temp >> 4) - ((s32)le16_to_cpu(buf[T1])))) >> 12) *
+		((s32)(s16)le16_to_cpu(buf[T3]))) >> 14;
 
-	return t;
+	return (data->t_fine * 5 + 128) >> 8;
 }
 
 /*
@@ -222,29 +184,38 @@ static s32 bmp280_compensate_temp(struct bmp280_data *data,
  * Taken from datasheet, Section 3.11.3, "Compensation formula".
  */
 static u32 bmp280_compensate_press(struct bmp280_data *data,
-				   struct bmp280_comp_press *comp,
 				   s32 adc_press)
 {
+	int ret;
 	s64 var1, var2, p;
+	__le16 buf[BMP280_COMP_PRESS_REG_COUNT / 2];
+
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_PRESS_START,
+			       buf, BMP280_COMP_PRESS_REG_COUNT);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"failed to read pressure calibration parameters\n");
+		return ret;
+	}
 
-	var1 = ((s64) data->t_fine) - 128000;
-	var2 = var1 * var1 * (s64) comp->dig_p6;
-	var2 = var2 + ((var1 * (s64) comp->dig_p5) << 17);
-	var2 = var2 + (((s64) comp->dig_p4) << 35);
-	var1 = ((var1 * var1 * (s64) comp->dig_p3) >> 8) +
-		((var1 * (s64) comp->dig_p2) << 12);
-	var1 = (((((s64) 1) << 47) + var1)) * ((s64) comp->dig_p1) >> 33;
+	var1 = ((s64)data->t_fine) - 128000;
+	var2 = var1 * var1 * (s64)(s16)le16_to_cpu(buf[P6]);
+	var2 += (var1 * (s64)(s16)le16_to_cpu(buf[P5])) << 17;
+	var2 += ((s64)(s16)le16_to_cpu(buf[P4])) << 35;
+	var1 = ((var1 * var1 * (s64)(s16)le16_to_cpu(buf[P3])) >> 8) +
+		((var1 * (s64)(s16)le16_to_cpu(buf[P2])) << 12);
+	var1 = ((((s64)1) << 47) + var1) * ((s64)le16_to_cpu(buf[P1])) >> 33;
 
 	if (var1 == 0)
 		return 0;
 
-	p = ((((s64) 1048576 - adc_press) << 31) - var2) * 3125;
+	p = ((((s64)1048576 - adc_press) << 31) - var2) * 3125;
 	p = div64_s64(p, var1);
-	var1 = (((s64) comp->dig_p9) * (p >> 13) * (p >> 13)) >> 25;
-	var2 = (((s64) comp->dig_p8) * p) >> 19;
-	p = ((p + var1 + var2) >> 8) + (((s64) comp->dig_p7) << 4);
+	var1 = (((s64)(s16)le16_to_cpu(buf[P9])) * (p >> 13) * (p >> 13)) >> 25;
+	var2 = (((s64)(s16)le16_to_cpu(buf[P8])) * p) >> 19;
+	p = ((p + var1 + var2) >> 8) + (((s64)(s16)le16_to_cpu(buf[P7])) << 4);
 
-	return (u32) p;
+	return (u32)p;
 }
 
 static int bmp280_read_temp(struct bmp280_data *data,
@@ -253,11 +224,6 @@ static int bmp280_read_temp(struct bmp280_data *data,
 	int ret;
 	__be32 tmp = 0;
 	s32 adc_temp, comp_temp;
-	struct bmp280_comp_temp comp;
-
-	ret = bmp280_read_compensation_temp(data, &comp);
-	if (ret < 0)
-		return ret;
 
 	ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB,
 			       (u8 *) &tmp, 3);
@@ -267,7 +233,7 @@ static int bmp280_read_temp(struct bmp280_data *data,
 	}
 
 	adc_temp = be32_to_cpu(tmp) >> 12;
-	comp_temp = bmp280_compensate_temp(data, &comp, adc_temp);
+	comp_temp = bmp280_compensate_temp(data, adc_temp);
 
 	/*
 	 * val might be NULL if we're called by the read_press routine,
@@ -288,11 +254,6 @@ static int bmp280_read_press(struct bmp280_data *data,
 	__be32 tmp = 0;
 	s32 adc_press;
 	u32 comp_press;
-	struct bmp280_comp_press comp;
-
-	ret = bmp280_read_compensation_press(data, &comp);
-	if (ret < 0)
-		return ret;
 
 	/* Read and compensate temperature so we get a reading of t_fine. */
 	ret = bmp280_read_temp(data, NULL);
@@ -307,7 +268,7 @@ static int bmp280_read_press(struct bmp280_data *data,
 	}
 
 	adc_press = be32_to_cpu(tmp) >> 12;
-	comp_press = bmp280_compensate_press(data, &comp, adc_press);
+	comp_press = bmp280_compensate_press(data, adc_press);
 
 	*val = comp_press;
 	*val2 = 256000;
@@ -366,7 +327,7 @@ static int bmp280_chip_init(struct bmp280_data *data)
 				 BMP280_MODE_NORMAL);
 	if (ret < 0) {
 		dev_err(&data->client->dev,
-			"failed to write config register\n");
+			"failed to write ctrl_meas register\n");
 		return ret;
 	}
 
@@ -394,7 +355,6 @@ static int bmp280_probe(struct i2c_client *client,
 	if (!indio_dev)
 		return -ENOMEM;
 
-	i2c_set_clientdata(client, indio_dev);
 	data = iio_priv(indio_dev);
 	mutex_init(&data->lock);
 	data->client = client;
diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig
index 0c8cdf58f6a1..41a8d8ffa0de 100644
--- a/drivers/iio/proximity/Kconfig
+++ b/drivers/iio/proximity/Kconfig
@@ -17,3 +17,20 @@ config AS3935
 	  module will be called as3935
 
 endmenu
+
+menu "Proximity sensors"
+
+config SX9500
+	tristate "SX9500 Semtech proximity sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  Say Y here to build a driver for Semtech's SX9500 capacitive
+	  proximity/button sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sx9500.
+
+endmenu
diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile
index 743adee1c8bf..9818dc562abd 100644
--- a/drivers/iio/proximity/Makefile
+++ b/drivers/iio/proximity/Makefile
@@ -4,3 +4,4 @@
 
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AS3935)		+= as3935.o
+obj-$(CONFIG_SX9500)		+= sx9500.o
diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c
new file mode 100644
index 000000000000..74dff4e4a11a
--- /dev/null
+++ b/drivers/iio/proximity/sx9500.c
@@ -0,0 +1,752 @@
+/*
+ * Copyright (c) 2014 Intel Corporation
+ *
+ * Driver for Semtech's SX9500 capacitive proximity/button solution.
+ * Datasheet available at
+ * <http://www.semtech.com/images/datasheet/sx9500.pdf>.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/acpi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#define SX9500_DRIVER_NAME		"sx9500"
+#define SX9500_IRQ_NAME			"sx9500_event"
+#define SX9500_GPIO_NAME		"sx9500_gpio"
+
+/* Register definitions. */
+#define SX9500_REG_IRQ_SRC		0x00
+#define SX9500_REG_STAT			0x01
+#define SX9500_REG_IRQ_MSK		0x03
+
+#define SX9500_REG_PROX_CTRL0		0x06
+#define SX9500_REG_PROX_CTRL1		0x07
+#define SX9500_REG_PROX_CTRL2		0x08
+#define SX9500_REG_PROX_CTRL3		0x09
+#define SX9500_REG_PROX_CTRL4		0x0a
+#define SX9500_REG_PROX_CTRL5		0x0b
+#define SX9500_REG_PROX_CTRL6		0x0c
+#define SX9500_REG_PROX_CTRL7		0x0d
+#define SX9500_REG_PROX_CTRL8		0x0e
+
+#define SX9500_REG_SENSOR_SEL		0x20
+#define SX9500_REG_USE_MSB		0x21
+#define SX9500_REG_USE_LSB		0x22
+#define SX9500_REG_AVG_MSB		0x23
+#define SX9500_REG_AVG_LSB		0x24
+#define SX9500_REG_DIFF_MSB		0x25
+#define SX9500_REG_DIFF_LSB		0x26
+#define SX9500_REG_OFFSET_MSB		0x27
+#define SX9500_REG_OFFSET_LSB		0x28
+
+#define SX9500_REG_RESET		0x7f
+
+/* Write this to REG_RESET to do a soft reset. */
+#define SX9500_SOFT_RESET		0xde
+
+#define SX9500_SCAN_PERIOD_MASK		GENMASK(6, 4)
+#define SX9500_SCAN_PERIOD_SHIFT	4
+
+/*
+ * These serve for identifying IRQ source in the IRQ_SRC register, and
+ * also for masking the IRQs in the IRQ_MSK register.
+ */
+#define SX9500_CLOSE_IRQ		BIT(6)
+#define SX9500_FAR_IRQ			BIT(5)
+#define SX9500_CONVDONE_IRQ		BIT(3)
+
+#define SX9500_PROXSTAT_SHIFT		4
+
+#define SX9500_NUM_CHANNELS		4
+
+struct sx9500_data {
+	struct mutex mutex;
+	struct i2c_client *client;
+	struct iio_trigger *trig;
+	struct regmap *regmap;
+	/*
+	 * Last reading of the proximity status for each channel.  We
+	 * only send an event to user space when this changes.
+	 */
+	bool prox_stat[SX9500_NUM_CHANNELS];
+	bool event_enabled[SX9500_NUM_CHANNELS];
+	bool trigger_enabled;
+	u16 *buffer;
+};
+
+static const struct iio_event_spec sx9500_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+#define SX9500_CHANNEL(idx)					\
+	{							\
+		.type = IIO_PROXIMITY,				\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+		.indexed = 1,					\
+		.channel = idx,					\
+		.event_spec = sx9500_events,			\
+		.num_event_specs = ARRAY_SIZE(sx9500_events),	\
+		.scan_index = idx,				\
+		.scan_type = {					\
+			.sign = 'u',				\
+			.realbits = 16,				\
+			.storagebits = 16,			\
+			.shift = 0,				\
+		},						\
+	}
+
+static const struct iio_chan_spec sx9500_channels[] = {
+	SX9500_CHANNEL(0),
+	SX9500_CHANNEL(1),
+	SX9500_CHANNEL(2),
+	SX9500_CHANNEL(3),
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+static const struct {
+	int val;
+	int val2;
+} sx9500_samp_freq_table[] = {
+	{33, 333333},
+	{16, 666666},
+	{11, 111111},
+	{8, 333333},
+	{6, 666666},
+	{5, 0},
+	{3, 333333},
+	{2, 500000},
+};
+
+static const struct regmap_range sx9500_writable_reg_ranges[] = {
+	regmap_reg_range(SX9500_REG_IRQ_MSK, SX9500_REG_IRQ_MSK),
+	regmap_reg_range(SX9500_REG_PROX_CTRL0, SX9500_REG_PROX_CTRL8),
+	regmap_reg_range(SX9500_REG_SENSOR_SEL, SX9500_REG_SENSOR_SEL),
+	regmap_reg_range(SX9500_REG_OFFSET_MSB, SX9500_REG_OFFSET_LSB),
+	regmap_reg_range(SX9500_REG_RESET, SX9500_REG_RESET),
+};
+
+static const struct regmap_access_table sx9500_writeable_regs = {
+	.yes_ranges = sx9500_writable_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sx9500_writable_reg_ranges),
+};
+
+/*
+ * All allocated registers are readable, so we just list unallocated
+ * ones.
+ */
+static const struct regmap_range sx9500_non_readable_reg_ranges[] = {
+	regmap_reg_range(SX9500_REG_STAT + 1, SX9500_REG_STAT + 1),
+	regmap_reg_range(SX9500_REG_IRQ_MSK + 1, SX9500_REG_PROX_CTRL0 - 1),
+	regmap_reg_range(SX9500_REG_PROX_CTRL8 + 1, SX9500_REG_SENSOR_SEL - 1),
+	regmap_reg_range(SX9500_REG_OFFSET_LSB + 1, SX9500_REG_RESET - 1),
+};
+
+static const struct regmap_access_table sx9500_readable_regs = {
+	.no_ranges = sx9500_non_readable_reg_ranges,
+	.n_no_ranges = ARRAY_SIZE(sx9500_non_readable_reg_ranges),
+};
+
+static const struct regmap_range sx9500_volatile_reg_ranges[] = {
+	regmap_reg_range(SX9500_REG_IRQ_SRC, SX9500_REG_STAT),
+	regmap_reg_range(SX9500_REG_USE_MSB, SX9500_REG_OFFSET_LSB),
+	regmap_reg_range(SX9500_REG_RESET, SX9500_REG_RESET),
+};
+
+static const struct regmap_access_table sx9500_volatile_regs = {
+	.yes_ranges = sx9500_volatile_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sx9500_volatile_reg_ranges),
+};
+
+static const struct regmap_config sx9500_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = SX9500_REG_RESET,
+	.cache_type = REGCACHE_RBTREE,
+
+	.wr_table = &sx9500_writeable_regs,
+	.rd_table = &sx9500_readable_regs,
+	.volatile_table = &sx9500_volatile_regs,
+};
+
+static int sx9500_read_proximity(struct sx9500_data *data,
+				 const struct iio_chan_spec *chan,
+				 int *val)
+{
+	int ret;
+	__be16 regval;
+
+	ret = regmap_write(data->regmap, SX9500_REG_SENSOR_SEL, chan->channel);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_bulk_read(data->regmap, SX9500_REG_USE_MSB, &regval, 2);
+	if (ret < 0)
+		return ret;
+
+	*val = 32767 - (s16)be16_to_cpu(regval);
+
+	return IIO_VAL_INT;
+}
+
+static int sx9500_read_samp_freq(struct sx9500_data *data,
+				 int *val, int *val2)
+{
+	int ret;
+	unsigned int regval;
+
+	mutex_lock(&data->mutex);
+	ret = regmap_read(data->regmap, SX9500_REG_PROX_CTRL0, &regval);
+	mutex_unlock(&data->mutex);
+
+	if (ret < 0)
+		return ret;
+
+	regval = (regval & SX9500_SCAN_PERIOD_MASK) >> SX9500_SCAN_PERIOD_SHIFT;
+	*val = sx9500_samp_freq_table[regval].val;
+	*val2 = sx9500_samp_freq_table[regval].val2;
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int sx9500_read_raw(struct iio_dev *indio_dev,
+			   const struct iio_chan_spec *chan,
+			   int *val, int *val2, long mask)
+{
+	struct sx9500_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		switch (mask) {
+		case IIO_CHAN_INFO_RAW:
+			if (iio_buffer_enabled(indio_dev))
+				return -EBUSY;
+			mutex_lock(&data->mutex);
+			ret = sx9500_read_proximity(data, chan, val);
+			mutex_unlock(&data->mutex);
+			return ret;
+		case IIO_CHAN_INFO_SAMP_FREQ:
+			return sx9500_read_samp_freq(data, val, val2);
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sx9500_set_samp_freq(struct sx9500_data *data,
+				int val, int val2)
+{
+	int i, ret;
+
+	for (i = 0; i < ARRAY_SIZE(sx9500_samp_freq_table); i++)
+		if (val == sx9500_samp_freq_table[i].val &&
+		    val2 == sx9500_samp_freq_table[i].val2)
+			break;
+
+	if (i == ARRAY_SIZE(sx9500_samp_freq_table))
+		return -EINVAL;
+
+	mutex_lock(&data->mutex);
+
+	ret = regmap_update_bits(data->regmap, SX9500_REG_PROX_CTRL0,
+				 SX9500_SCAN_PERIOD_MASK,
+				 i << SX9500_SCAN_PERIOD_SHIFT);
+
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9500_write_raw(struct iio_dev *indio_dev,
+			    const struct iio_chan_spec *chan,
+			    int val, int val2, long mask)
+{
+	struct sx9500_data *data = iio_priv(indio_dev);
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		switch (mask) {
+		case IIO_CHAN_INFO_SAMP_FREQ:
+			return sx9500_set_samp_freq(data, val, val2);
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static irqreturn_t sx9500_irq_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct sx9500_data *data = iio_priv(indio_dev);
+
+	if (data->trigger_enabled)
+		iio_trigger_poll(data->trig);
+
+	/*
+	 * Even if no event is enabled, we need to wake the thread to
+	 * clear the interrupt state by reading SX9500_REG_IRQ_SRC.  It
+	 * is not possible to do that here because regmap_read takes a
+	 * mutex.
+	 */
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t sx9500_irq_thread_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct sx9500_data *data = iio_priv(indio_dev);
+	int ret;
+	unsigned int val, chan;
+
+	mutex_lock(&data->mutex);
+
+	ret = regmap_read(data->regmap, SX9500_REG_IRQ_SRC, &val);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "i2c transfer error in irq\n");
+		goto out;
+	}
+
+	if (!(val & (SX9500_CLOSE_IRQ | SX9500_FAR_IRQ)))
+		goto out;
+
+	ret = regmap_read(data->regmap, SX9500_REG_STAT, &val);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "i2c transfer error in irq\n");
+		goto out;
+	}
+
+	val >>= SX9500_PROXSTAT_SHIFT;
+	for (chan = 0; chan < SX9500_NUM_CHANNELS; chan++) {
+		int dir;
+		u64 ev;
+		bool new_prox = val & BIT(chan);
+
+		if (!data->event_enabled[chan])
+			continue;
+		if (new_prox == data->prox_stat[chan])
+			/* No change on this channel. */
+			continue;
+
+		dir = new_prox ? IIO_EV_DIR_FALLING :
+			IIO_EV_DIR_RISING;
+		ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY,
+					  chan,
+					  IIO_EV_TYPE_THRESH,
+					  dir);
+		iio_push_event(indio_dev, ev, iio_get_time_ns());
+		data->prox_stat[chan] = new_prox;
+	}
+
+out:
+	mutex_unlock(&data->mutex);
+
+	return IRQ_HANDLED;
+}
+
+static int sx9500_read_event_config(struct iio_dev *indio_dev,
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir)
+{
+	struct sx9500_data *data = iio_priv(indio_dev);
+
+	if (chan->type != IIO_PROXIMITY || type != IIO_EV_TYPE_THRESH ||
+	    dir != IIO_EV_DIR_EITHER)
+		return -EINVAL;
+
+	return data->event_enabled[chan->channel];
+}
+
+static int sx9500_write_event_config(struct iio_dev *indio_dev,
+				     const struct iio_chan_spec *chan,
+				     enum iio_event_type type,
+				     enum iio_event_direction dir,
+				     int state)
+{
+	struct sx9500_data *data = iio_priv(indio_dev);
+	int ret, i;
+	bool any_active = false;
+	unsigned int irqmask;
+
+	if (chan->type != IIO_PROXIMITY || type != IIO_EV_TYPE_THRESH ||
+	    dir != IIO_EV_DIR_EITHER)
+		return -EINVAL;
+
+	mutex_lock(&data->mutex);
+
+	data->event_enabled[chan->channel] = state;
+
+	for (i = 0; i < SX9500_NUM_CHANNELS; i++)
+		if (data->event_enabled[i]) {
+			any_active = true;
+			break;
+		}
+
+	irqmask = SX9500_CLOSE_IRQ | SX9500_FAR_IRQ;
+	if (any_active)
+		ret = regmap_update_bits(data->regmap, SX9500_REG_IRQ_MSK,
+					 irqmask, irqmask);
+	else
+		ret = regmap_update_bits(data->regmap, SX9500_REG_IRQ_MSK,
+					 irqmask, 0);
+
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9500_update_scan_mode(struct iio_dev *indio_dev,
+				   const unsigned long *scan_mask)
+{
+	struct sx9500_data *data = iio_priv(indio_dev);
+
+	mutex_lock(&data->mutex);
+	kfree(data->buffer);
+	data->buffer = kzalloc(indio_dev->scan_bytes, GFP_KERNEL);
+	mutex_unlock(&data->mutex);
+
+	if (data->buffer == NULL)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
+	"2.500000 3.333333 5 6.666666 8.333333 11.111111 16.666666 33.333333");
+
+static struct attribute *sx9500_attributes[] = {
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group sx9500_attribute_group = {
+	.attrs = sx9500_attributes,
+};
+
+static const struct iio_info sx9500_info = {
+	.driver_module = THIS_MODULE,
+	.attrs = &sx9500_attribute_group,
+	.read_raw = &sx9500_read_raw,
+	.write_raw = &sx9500_write_raw,
+	.read_event_config = &sx9500_read_event_config,
+	.write_event_config = &sx9500_write_event_config,
+	.update_scan_mode = &sx9500_update_scan_mode,
+};
+
+static int sx9500_set_trigger_state(struct iio_trigger *trig,
+				    bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct sx9500_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+
+	ret = regmap_update_bits(data->regmap, SX9500_REG_IRQ_MSK,
+				 SX9500_CONVDONE_IRQ,
+				 state ? SX9500_CONVDONE_IRQ : 0);
+	if (ret == 0)
+		data->trigger_enabled = state;
+
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static const struct iio_trigger_ops sx9500_trigger_ops = {
+	.set_trigger_state = sx9500_set_trigger_state,
+	.owner = THIS_MODULE,
+};
+
+static irqreturn_t sx9500_trigger_handler(int irq, void *private)
+{
+	struct iio_poll_func *pf = private;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct sx9500_data *data = iio_priv(indio_dev);
+	int val, bit, ret, i = 0;
+
+	mutex_lock(&data->mutex);
+
+	for_each_set_bit(bit, indio_dev->buffer->scan_mask,
+			 indio_dev->masklength) {
+		ret = sx9500_read_proximity(data, &indio_dev->channels[bit],
+					    &val);
+		if (ret < 0)
+			goto out;
+
+		data->buffer[i++] = val;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+					   iio_get_time_ns());
+
+out:
+	mutex_unlock(&data->mutex);
+
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+struct sx9500_reg_default {
+	u8 reg;
+	u8 def;
+};
+
+static const struct sx9500_reg_default sx9500_default_regs[] = {
+	{
+		.reg = SX9500_REG_PROX_CTRL1,
+		/* Shield enabled, small range. */
+		.def = 0x43,
+	},
+	{
+		.reg = SX9500_REG_PROX_CTRL2,
+		/* x8 gain, 167kHz frequency, finest resolution. */
+		.def = 0x77,
+	},
+	{
+		.reg = SX9500_REG_PROX_CTRL3,
+		/* Doze enabled, 2x scan period doze, no raw filter. */
+		.def = 0x40,
+	},
+	{
+		.reg = SX9500_REG_PROX_CTRL4,
+		/* Average threshold. */
+		.def = 0x30,
+	},
+	{
+		.reg = SX9500_REG_PROX_CTRL5,
+		/*
+		 * Debouncer off, lowest average negative filter,
+		 * highest average postive filter.
+		 */
+		.def = 0x0f,
+	},
+	{
+		.reg = SX9500_REG_PROX_CTRL6,
+		/* Proximity detection threshold: 280 */
+		.def = 0x0e,
+	},
+	{
+		.reg = SX9500_REG_PROX_CTRL7,
+		/*
+		 * No automatic compensation, compensate each pin
+		 * independently, proximity hysteresis: 32, close
+		 * debouncer off, far debouncer off.
+		 */
+		.def = 0x00,
+	},
+	{
+		.reg = SX9500_REG_PROX_CTRL8,
+		/* No stuck timeout, no periodic compensation. */
+		.def = 0x00,
+	},
+	{
+		.reg = SX9500_REG_PROX_CTRL0,
+		/* Scan period: 30ms, all sensors enabled. */
+		.def = 0x0f,
+	},
+};
+
+static int sx9500_init_device(struct iio_dev *indio_dev)
+{
+	struct sx9500_data *data = iio_priv(indio_dev);
+	int ret, i;
+	unsigned int val;
+
+	ret = regmap_write(data->regmap, SX9500_REG_IRQ_MSK, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(data->regmap, SX9500_REG_RESET,
+			   SX9500_SOFT_RESET);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(data->regmap, SX9500_REG_IRQ_SRC, &val);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(sx9500_default_regs); i++) {
+		ret = regmap_write(data->regmap,
+				   sx9500_default_regs[i].reg,
+				   sx9500_default_regs[i].def);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int sx9500_gpio_probe(struct i2c_client *client,
+			     struct sx9500_data *data)
+{
+	struct device *dev;
+	struct gpio_desc *gpio;
+	int ret;
+
+	if (!client)
+		return -EINVAL;
+
+	dev = &client->dev;
+
+	/* data ready gpio interrupt pin */
+	gpio = devm_gpiod_get_index(dev, SX9500_GPIO_NAME, 0);
+	if (IS_ERR(gpio)) {
+		dev_err(dev, "acpi gpio get index failed\n");
+		return PTR_ERR(gpio);
+	}
+
+	ret = gpiod_direction_input(gpio);
+	if (ret)
+		return ret;
+
+	ret = gpiod_to_irq(gpio);
+
+	dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
+
+	return ret;
+}
+
+static int sx9500_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int ret;
+	struct iio_dev *indio_dev;
+	struct sx9500_data *data;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	mutex_init(&data->mutex);
+	data->trigger_enabled = false;
+
+	data->regmap = devm_regmap_init_i2c(client, &sx9500_regmap_config);
+	if (IS_ERR(data->regmap))
+		return PTR_ERR(data->regmap);
+
+	sx9500_init_device(indio_dev);
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->name = SX9500_DRIVER_NAME;
+	indio_dev->channels = sx9500_channels;
+	indio_dev->num_channels = ARRAY_SIZE(sx9500_channels);
+	indio_dev->info = &sx9500_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	i2c_set_clientdata(client, indio_dev);
+
+	if (client->irq <= 0)
+		client->irq = sx9500_gpio_probe(client, data);
+
+	if (client->irq > 0) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+				sx9500_irq_handler, sx9500_irq_thread_handler,
+				IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				SX9500_IRQ_NAME, indio_dev);
+		if (ret < 0)
+			return ret;
+
+		data->trig = devm_iio_trigger_alloc(&client->dev,
+				"%s-dev%d", indio_dev->name, indio_dev->id);
+		if (!data->trig)
+			return -ENOMEM;
+
+		data->trig->dev.parent = &client->dev;
+		data->trig->ops = &sx9500_trigger_ops;
+		iio_trigger_set_drvdata(data->trig, indio_dev);
+
+		ret = iio_trigger_register(data->trig);
+		if (ret)
+			return ret;
+	}
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+					 sx9500_trigger_handler, NULL);
+	if (ret < 0)
+		goto out_trigger_unregister;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		goto out_buffer_cleanup;
+
+	return 0;
+
+out_buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+out_trigger_unregister:
+	if (client->irq > 0)
+		iio_trigger_unregister(data->trig);
+
+	return ret;
+}
+
+static int sx9500_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct sx9500_data *data = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	if (client->irq > 0)
+		iio_trigger_unregister(data->trig);
+	kfree(data->buffer);
+
+	return 0;
+}
+
+static const struct acpi_device_id sx9500_acpi_match[] = {
+	{"SSX9500", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, sx9500_acpi_match);
+
+static const struct i2c_device_id sx9500_id[] = {
+	{"sx9500", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, sx9500_id);
+
+static struct i2c_driver sx9500_driver = {
+	.driver = {
+		.name	= SX9500_DRIVER_NAME,
+		.acpi_match_table = ACPI_PTR(sx9500_acpi_match),
+	},
+	.probe		= sx9500_probe,
+	.remove		= sx9500_remove,
+	.id_table	= sx9500_id,
+};
+module_i2c_driver(sx9500_driver);
+
+MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>");
+MODULE_DESCRIPTION("Driver for Semtech SX9500 proximity sensor");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/trigger/iio-trig-sysfs.c b/drivers/iio/trigger/iio-trig-sysfs.c
index 254c7e906127..3dfab2bc6d69 100644
--- a/drivers/iio/trigger/iio-trig-sysfs.c
+++ b/drivers/iio/trigger/iio-trig-sysfs.c
@@ -135,6 +135,7 @@ static int iio_sysfs_trigger_probe(int id)
 	struct iio_sysfs_trig *t;
 	int ret;
 	bool foundit = false;
+
 	mutex_lock(&iio_sysfs_trig_list_mut);
 	list_for_each_entry(t, &iio_sysfs_trig_list, l)
 		if (id == t->id) {
@@ -185,6 +186,7 @@ static int iio_sysfs_trigger_remove(int id)
 {
 	bool foundit = false;
 	struct iio_sysfs_trig *t;
+
 	mutex_lock(&iio_sysfs_trig_list_mut);
 	list_for_each_entry(t, &iio_sysfs_trig_list, l)
 		if (id == t->id) {
diff --git a/drivers/staging/iio/Documentation/iio_event_monitor.c b/drivers/staging/iio/Documentation/iio_event_monitor.c
index 940ed2399e73..def236abcb3e 100644
--- a/drivers/staging/iio/Documentation/iio_event_monitor.c
+++ b/drivers/staging/iio/Documentation/iio_event_monitor.c
@@ -49,6 +49,8 @@ static const char * const iio_chan_type_name_spec[] = {
 	[IIO_CCT] = "cct",
 	[IIO_PRESSURE] = "pressure",
 	[IIO_HUMIDITYRELATIVE] = "humidityrelative",
+	[IIO_ACTIVITY] = "activity",
+	[IIO_STEPS] = "steps",
 };
 
 static const char * const iio_ev_type_text[] = {
@@ -57,6 +59,7 @@ static const char * const iio_ev_type_text[] = {
 	[IIO_EV_TYPE_ROC] = "roc",
 	[IIO_EV_TYPE_THRESH_ADAPTIVE] = "thresh_adaptive",
 	[IIO_EV_TYPE_MAG_ADAPTIVE] = "mag_adaptive",
+	[IIO_EV_TYPE_INSTANCE] = "instance",
 };
 
 static const char * const iio_ev_dir_text[] = {
@@ -92,6 +95,10 @@ static const char * const iio_modifier_names[] = {
 	[IIO_MOD_NORTH_TRUE] = "from_north_true",
 	[IIO_MOD_NORTH_MAGN_TILT_COMP] = "from_north_magnetic_tilt_comp",
 	[IIO_MOD_NORTH_TRUE_TILT_COMP] = "from_north_true_tilt_comp",
+	[IIO_MOD_RUNNING] = "running",
+	[IIO_MOD_JOGGING] = "jogging",
+	[IIO_MOD_WALKING] = "walking",
+	[IIO_MOD_STILL] = "still",
 };
 
 static bool event_is_known(struct iio_event_data *event)
@@ -121,6 +128,8 @@ static bool event_is_known(struct iio_event_data *event)
 	case IIO_CCT:
 	case IIO_PRESSURE:
 	case IIO_HUMIDITYRELATIVE:
+	case IIO_ACTIVITY:
+	case IIO_STEPS:
 		break;
 	default:
 		return false;
@@ -154,6 +163,10 @@ static bool event_is_known(struct iio_event_data *event)
 	case IIO_MOD_NORTH_TRUE:
 	case IIO_MOD_NORTH_MAGN_TILT_COMP:
 	case IIO_MOD_NORTH_TRUE_TILT_COMP:
+	case IIO_MOD_RUNNING:
+	case IIO_MOD_JOGGING:
+	case IIO_MOD_WALKING:
+	case IIO_MOD_STILL:
 		break;
 	default:
 		return false;
@@ -165,6 +178,7 @@ static bool event_is_known(struct iio_event_data *event)
 	case IIO_EV_TYPE_ROC:
 	case IIO_EV_TYPE_THRESH_ADAPTIVE:
 	case IIO_EV_TYPE_MAG_ADAPTIVE:
+	case IIO_EV_TYPE_INSTANCE:
 		break;
 	default:
 		return false;
@@ -174,6 +188,7 @@ static bool event_is_known(struct iio_event_data *event)
 	case IIO_EV_DIR_EITHER:
 	case IIO_EV_DIR_RISING:
 	case IIO_EV_DIR_FALLING:
+	case IIO_EV_DIR_NONE:
 		break;
 	default:
 		return false;
@@ -214,9 +229,11 @@ static void print_event(struct iio_event_data *event)
 	else if (chan >= 0)
 		printf("channel: %d, ", chan);
 
-	printf("evtype: %s, direction: %s\n",
-		iio_ev_type_text[ev_type],
-		iio_ev_dir_text[dir]);
+	printf("evtype: %s", iio_ev_type_text[ev_type]);
+
+	if (dir != IIO_EV_DIR_NONE)
+		printf(", direction: %s", iio_ev_dir_text[dir]);
+	printf("\n");
 }
 
 int main(int argc, char **argv)
diff --git a/drivers/staging/iio/Documentation/ring.txt b/drivers/staging/iio/Documentation/ring.txt
index e1da43381d0e..18718fcaf259 100644
--- a/drivers/staging/iio/Documentation/ring.txt
+++ b/drivers/staging/iio/Documentation/ring.txt
@@ -39,9 +39,9 @@ request_update
   If parameters have changed that require reinitialization or configuration of
   the buffer this will trigger it.
 
-get_bytes_per_datum, set_bytes_per_datum
-  Get/set the number of bytes for a complete scan. (All samples + timestamp)
+set_bytes_per_datum
+  Set the number of bytes for a complete scan. (All samples + timestamp)
 
-get_length / set_length
-  Get/set the number of complete scans that may be held by the buffer.
+set_length
+  Set the number of complete scans that may be held by the buffer.
 
diff --git a/drivers/staging/iio/accel/lis3l02dq_core.c b/drivers/staging/iio/accel/lis3l02dq_core.c
index f5e145caffa9..b78c9c5d5588 100644
--- a/drivers/staging/iio/accel/lis3l02dq_core.c
+++ b/drivers/staging/iio/accel/lis3l02dq_core.c
@@ -716,14 +716,6 @@ static int lis3l02dq_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	ret = iio_buffer_register(indio_dev,
-				  lis3l02dq_channels,
-				  ARRAY_SIZE(lis3l02dq_channels));
-	if (ret) {
-		dev_err(&spi->dev, "failed to initialize the buffer\n");
-		goto error_unreg_buffer_funcs;
-	}
-
 	if (spi->irq) {
 		ret = request_threaded_irq(st->us->irq,
 					   &lis3l02dq_th,
@@ -732,7 +724,7 @@ static int lis3l02dq_probe(struct spi_device *spi)
 					   "lis3l02dq",
 					   indio_dev);
 		if (ret)
-			goto error_uninitialize_buffer;
+			goto error_unreg_buffer_funcs;
 
 		ret = lis3l02dq_probe_trigger(indio_dev);
 		if (ret)
@@ -756,8 +748,6 @@ error_remove_trigger:
 error_free_interrupt:
 	if (spi->irq)
 		free_irq(st->us->irq, indio_dev);
-error_uninitialize_buffer:
-	iio_buffer_unregister(indio_dev);
 error_unreg_buffer_funcs:
 	lis3l02dq_unconfigure_buffer(indio_dev);
 	return ret;
@@ -804,7 +794,6 @@ static int lis3l02dq_remove(struct spi_device *spi)
 		free_irq(st->us->irq, indio_dev);
 
 	lis3l02dq_remove_trigger(indio_dev);
-	iio_buffer_unregister(indio_dev);
 	lis3l02dq_unconfigure_buffer(indio_dev);
 
 	return 0;
diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c b/drivers/staging/iio/accel/lis3l02dq_ring.c
index 9efc77b0ebdd..1fd90090a633 100644
--- a/drivers/staging/iio/accel/lis3l02dq_ring.c
+++ b/drivers/staging/iio/accel/lis3l02dq_ring.c
@@ -393,7 +393,7 @@ int lis3l02dq_configure_buffer(struct iio_dev *indio_dev)
 	int ret;
 	struct iio_buffer *buffer;
 
-	buffer = iio_kfifo_allocate(indio_dev);
+	buffer = iio_kfifo_allocate();
 	if (!buffer)
 		return -ENOMEM;
 
diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c
index e4e56391487a..31fb2182c198 100644
--- a/drivers/staging/iio/accel/sca3000_core.c
+++ b/drivers/staging/iio/accel/sca3000_core.c
@@ -223,33 +223,6 @@ error_ret:
 	return ret;
 }
 
-#ifdef SCA3000_DEBUG
-/**
- * sca3000_check_status() check the status register
- *
- * Only used for debugging purposes
- **/
-static int sca3000_check_status(struct device *dev)
-{
-	int ret;
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct sca3000_state *st = iio_priv(indio_dev);
-
-	mutex_lock(&st->lock);
-	ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_STATUS, 1);
-	if (ret < 0)
-		goto error_ret;
-	if (st->rx[0] & SCA3000_EEPROM_CS_ERROR)
-		dev_err(dev, "eeprom error\n");
-	if (st->rx[0] & SCA3000_SPI_FRAME_ERROR)
-		dev_err(dev, "Previous SPI Frame was corrupt\n");
-
-error_ret:
-	mutex_unlock(&st->lock);
-	return ret;
-}
-#endif /* SCA3000_DEBUG */
-
 /**
  * sca3000_show_rev() - sysfs interface to read the chip revision number
  **/
@@ -459,6 +432,8 @@ static const struct iio_chan_spec sca3000_channels_with_temp[] = {
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
 			BIT(IIO_CHAN_INFO_OFFSET),
+		/* No buffer support */
+		.scan_index = -1,
 	},
 };
 
@@ -1154,17 +1129,6 @@ static int sca3000_probe(struct spi_device *spi)
 	if (ret < 0)
 		return ret;
 
-	ret = iio_buffer_register(indio_dev,
-				  sca3000_channels,
-				  ARRAY_SIZE(sca3000_channels));
-	if (ret < 0)
-		goto error_unregister_dev;
-	if (indio_dev->buffer) {
-		iio_scan_mask_set(indio_dev, indio_dev->buffer, 0);
-		iio_scan_mask_set(indio_dev, indio_dev->buffer, 1);
-		iio_scan_mask_set(indio_dev, indio_dev->buffer, 2);
-	}
-
 	if (spi->irq) {
 		ret = request_threaded_irq(spi->irq,
 					   NULL,
@@ -1173,7 +1137,7 @@ static int sca3000_probe(struct spi_device *spi)
 					   "sca3000",
 					   indio_dev);
 		if (ret)
-			goto error_unregister_ring;
+			goto error_unregister_dev;
 	}
 	sca3000_register_ring_funcs(indio_dev);
 	ret = sca3000_clean_setup(st);
@@ -1184,8 +1148,6 @@ static int sca3000_probe(struct spi_device *spi)
 error_free_irq:
 	if (spi->irq)
 		free_irq(spi->irq, indio_dev);
-error_unregister_ring:
-	iio_buffer_unregister(indio_dev);
 error_unregister_dev:
 	iio_device_unregister(indio_dev);
 	return ret;
@@ -1219,7 +1181,6 @@ static int sca3000_remove(struct spi_device *spi)
 	if (spi->irq)
 		free_irq(spi->irq, indio_dev);
 	iio_device_unregister(indio_dev);
-	iio_buffer_unregister(indio_dev);
 	sca3000_unconfigure_ring(indio_dev);
 
 	return 0;
diff --git a/drivers/staging/iio/accel/sca3000_ring.c b/drivers/staging/iio/accel/sca3000_ring.c
index 157827651bfa..f76a26885808 100644
--- a/drivers/staging/iio/accel/sca3000_ring.c
+++ b/drivers/staging/iio/accel/sca3000_ring.c
@@ -129,26 +129,11 @@ error_ret:
 	return ret ? ret : num_read;
 }
 
-/* This is only valid with all 3 elements enabled */
-static int sca3000_ring_get_length(struct iio_buffer *r)
-{
-	return 64;
-}
-
-/* only valid if resolution is kept at 11bits */
-static int sca3000_ring_get_bytes_per_datum(struct iio_buffer *r)
-{
-	return 6;
-}
-
 static bool sca3000_ring_buf_data_available(struct iio_buffer *r)
 {
 	return r->stufftoread;
 }
 
-static IIO_BUFFER_ENABLE_ATTR;
-static IIO_BUFFER_LENGTH_ATTR;
-
 /**
  * sca3000_query_ring_int() is the hardware ring status interrupt enabled
  **/
@@ -238,20 +223,13 @@ static IIO_DEVICE_ATTR(in_accel_scale,
  * only apply to the ring buffer.  At all times full rate and accuracy
  * is available via direct reading from registers.
  */
-static struct attribute *sca3000_ring_attributes[] = {
-	&dev_attr_length.attr,
-	&dev_attr_enable.attr,
+static const struct attribute *sca3000_ring_attributes[] = {
 	&iio_dev_attr_50_percent.dev_attr.attr,
 	&iio_dev_attr_75_percent.dev_attr.attr,
 	&iio_dev_attr_in_accel_scale.dev_attr.attr,
 	NULL,
 };
 
-static struct attribute_group sca3000_ring_attr = {
-	.attrs = sca3000_ring_attributes,
-	.name = "buffer",
-};
-
 static struct iio_buffer *sca3000_rb_allocate(struct iio_dev *indio_dev)
 {
 	struct iio_buffer *buf;
@@ -264,7 +242,8 @@ static struct iio_buffer *sca3000_rb_allocate(struct iio_dev *indio_dev)
 	ring->private = indio_dev;
 	buf = &ring->buf;
 	buf->stufftoread = 0;
-	buf->attrs = &sca3000_ring_attr;
+	buf->length = 64;
+	buf->attrs = sca3000_ring_attributes;
 	iio_buffer_init(buf);
 
 	return buf;
@@ -277,8 +256,6 @@ static void sca3000_ring_release(struct iio_buffer *r)
 
 static const struct iio_buffer_access_funcs sca3000_ring_access_funcs = {
 	.read_first_n = &sca3000_read_first_n_hw_rb,
-	.get_length = &sca3000_ring_get_length,
-	.get_bytes_per_datum = &sca3000_ring_get_bytes_per_datum,
 	.data_available = sca3000_ring_buf_data_available,
 	.release = sca3000_ring_release,
 };
diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
index f6526aa22e8a..6f8ce6c6574b 100644
--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -612,7 +612,7 @@ static int ad7192_probe(struct spi_device *spi)
 	const struct ad7192_platform_data *pdata = spi->dev.platform_data;
 	struct ad7192_state *st;
 	struct iio_dev *indio_dev;
-	int ret , voltage_uv = 0;
+	int ret, voltage_uv = 0;
 
 	if (!pdata) {
 		dev_err(&spi->dev, "no platform data?\n");
diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c
index f053535385bf..d9d6fad7cb00 100644
--- a/drivers/staging/iio/adc/mxs-lradc.c
+++ b/drivers/staging/iio/adc/mxs-lradc.c
@@ -436,7 +436,14 @@ static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch)
 	 */
 	mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch));
 
-	/* prepare the delay/loop unit according to the oversampling count */
+	/*
+	 * prepare the delay/loop unit according to the oversampling count
+	 *
+	 * from the datasheet:
+	 * "The DELAY fields in HW_LRADC_DELAY0, HW_LRADC_DELAY1,
+	 * HW_LRADC_DELAY2, and HW_LRADC_DELAY3 must be non-zero; otherwise,
+	 * the LRADC will not trigger the delay group."
+	 */
 	mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << ch) |
 		LRADC_DELAY_TRIGGER_DELAYS(0) |
 		LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) |
@@ -1495,20 +1502,38 @@ static int mxs_lradc_probe_touchscreen(struct mxs_lradc *lradc,
 		return -EINVAL;
 	}
 
-	lradc->over_sample_cnt = 4;
-	ret = of_property_read_u32(lradc_node, "fsl,ave-ctrl", &adapt);
-	if (ret == 0)
+	if (of_property_read_u32(lradc_node, "fsl,ave-ctrl", &adapt)) {
+		lradc->over_sample_cnt = 4;
+	} else {
+		if (adapt < 1 || adapt > 32) {
+			dev_err(lradc->dev, "Invalid sample count (%u)\n",
+				adapt);
+			return -EINVAL;
+		}
 		lradc->over_sample_cnt = adapt;
+	}
 
-	lradc->over_sample_delay = 2;
-	ret = of_property_read_u32(lradc_node, "fsl,ave-delay", &adapt);
-	if (ret == 0)
+	if (of_property_read_u32(lradc_node, "fsl,ave-delay", &adapt)) {
+		lradc->over_sample_delay = 2;
+	} else {
+		if (adapt < 2 || adapt > LRADC_DELAY_DELAY_MASK + 1) {
+			dev_err(lradc->dev, "Invalid sample delay (%u)\n",
+				adapt);
+			return -EINVAL;
+		}
 		lradc->over_sample_delay = adapt;
+	}
 
-	lradc->settling_delay = 10;
-	ret = of_property_read_u32(lradc_node, "fsl,settling", &adapt);
-	if (ret == 0)
+	if (of_property_read_u32(lradc_node, "fsl,settling", &adapt)) {
+		lradc->settling_delay = 10;
+	} else {
+		if (adapt < 1 || adapt > LRADC_DELAY_DELAY_MASK) {
+			dev_err(lradc->dev, "Invalid settling delay (%u)\n",
+				adapt);
+			return -EINVAL;
+		}
 		lradc->settling_delay = adapt;
+	}
 
 	return 0;
 }
diff --git a/drivers/staging/iio/iio_dummy_evgen.c b/drivers/staging/iio/iio_dummy_evgen.c
index 5a804f16ec2f..59ad5a3efe9c 100644
--- a/drivers/staging/iio/iio_dummy_evgen.c
+++ b/drivers/staging/iio/iio_dummy_evgen.c
@@ -33,6 +33,7 @@
  * @base: base of irq range
  * @enabled: mask of which irqs are enabled
  * @inuse: mask of which irqs are connected
+ * @regs: irq regs we are faking
  * @lock: protect the evgen state
  */
 struct iio_dummy_eventgen {
@@ -40,6 +41,7 @@ struct iio_dummy_eventgen {
 	int base;
 	bool enabled[IIO_EVENTGEN_NO];
 	bool inuse[IIO_EVENTGEN_NO];
+	struct iio_dummy_regs regs[IIO_EVENTGEN_NO];
 	struct mutex lock;
 };
 
@@ -136,6 +138,12 @@ int iio_dummy_evgen_release_irq(int irq)
 }
 EXPORT_SYMBOL_GPL(iio_dummy_evgen_release_irq);
 
+struct iio_dummy_regs *iio_dummy_evgen_get_regs(int irq)
+{
+	return &iio_evgen->regs[irq - iio_evgen->base];
+}
+EXPORT_SYMBOL_GPL(iio_dummy_evgen_get_regs);
+
 static void iio_dummy_evgen_free(void)
 {
 	irq_free_descs(iio_evgen->base, IIO_EVENTGEN_NO);
@@ -153,6 +161,15 @@ static ssize_t iio_evgen_poke(struct device *dev,
 			      size_t len)
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	unsigned long event;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &event);
+	if (ret)
+		return ret;
+
+	iio_evgen->regs[this_attr->address].reg_id   = this_attr->address;
+	iio_evgen->regs[this_attr->address].reg_data = event;
 
 	if (iio_evgen->enabled[this_attr->address])
 		handle_nested_irq(iio_evgen->base + this_attr->address);
diff --git a/drivers/staging/iio/iio_dummy_evgen.h b/drivers/staging/iio/iio_dummy_evgen.h
index 3a180811b315..2ac293ab7c8f 100644
--- a/drivers/staging/iio/iio_dummy_evgen.h
+++ b/drivers/staging/iio/iio_dummy_evgen.h
@@ -1,6 +1,12 @@
 #ifndef _IIO_DUMMY_EVGEN_H_
 #define _IIO_DUMMY_EVGEN_H_
 
+struct iio_dummy_regs {
+	u32 reg_id;
+	u32 reg_data;
+};
+
+struct iio_dummy_regs *iio_dummy_evgen_get_regs(int irq);
 int iio_dummy_evgen_get_irq(void);
 int iio_dummy_evgen_release_irq(int irq);
 
diff --git a/drivers/staging/iio/iio_simple_dummy.c b/drivers/staging/iio/iio_simple_dummy.c
index bf78e6f0311f..0b8611ac1003 100644
--- a/drivers/staging/iio/iio_simple_dummy.c
+++ b/drivers/staging/iio/iio_simple_dummy.c
@@ -69,6 +69,34 @@ static const struct iio_event_spec iio_dummy_event = {
 	.mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE),
 };
 
+/*
+ * simple step detect event - triggered when a step is detected
+ */
+static const struct iio_event_spec step_detect_event = {
+	.type = IIO_EV_TYPE_INSTANCE,
+	.dir = IIO_EV_DIR_NONE,
+	.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+};
+
+/*
+ * simple transition event - triggered when the reported running confidence
+ * value rises above a threshold value
+ */
+static const struct iio_event_spec iio_running_event = {
+	.type = IIO_EV_TYPE_THRESH,
+	.dir = IIO_EV_DIR_RISING,
+	.mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE),
+};
+
+/*
+ * simple transition event - triggered when the reported walking confidence
+ * value falls under a threshold value
+ */
+static const struct iio_event_spec iio_walking_event = {
+	.type = IIO_EV_TYPE_THRESH,
+	.dir = IIO_EV_DIR_FALLING,
+	.mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE),
+};
 #endif
 
 /*
@@ -211,10 +239,44 @@ static const struct iio_chan_spec iio_dummy_channels[] = {
 	{
 		.type = IIO_VOLTAGE,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_index = -1, /* No buffer support */
 		.output = 1,
 		.indexed = 1,
 		.channel = 0,
 	},
+	{
+		.type = IIO_STEPS,
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_ENABLE) |
+			BIT(IIO_CHAN_INFO_CALIBHEIGHT),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.scan_index = -1, /* No buffer support */
+#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
+		.event_spec = &step_detect_event,
+		.num_event_specs = 1,
+#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
+	},
+	{
+		.type = IIO_ACTIVITY,
+		.modified = 1,
+		.channel2 = IIO_MOD_RUNNING,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.scan_index = -1, /* No buffer support */
+#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
+		.event_spec = &iio_running_event,
+		.num_event_specs = 1,
+#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
+	},
+	{
+		.type = IIO_ACTIVITY,
+		.modified = 1,
+		.channel2 = IIO_MOD_WALKING,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.scan_index = -1, /* No buffer support */
+#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
+		.event_spec = &iio_walking_event,
+		.num_event_specs = 1,
+#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
+	},
 };
 
 /**
@@ -263,24 +325,55 @@ static int iio_dummy_read_raw(struct iio_dev *indio_dev,
 			break;
 		}
 		break;
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_STEPS:
+			*val = st->steps;
+			ret = IIO_VAL_INT;
+			break;
+		case IIO_ACTIVITY:
+			switch (chan->channel2) {
+			case IIO_MOD_RUNNING:
+				*val = st->activity_running;
+				ret = IIO_VAL_INT;
+				break;
+			case IIO_MOD_WALKING:
+				*val = st->activity_walking;
+				ret = IIO_VAL_INT;
+				break;
+			default:
+				break;
+			}
+			break;
+		default:
+			break;
+		}
+		break;
 	case IIO_CHAN_INFO_OFFSET:
 		/* only single ended adc -> 7 */
 		*val = 7;
 		ret = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SCALE:
-		switch (chan->differential) {
-		case 0:
-			/* only single ended adc -> 0.001333 */
-			*val = 0;
-			*val2 = 1333;
-			ret = IIO_VAL_INT_PLUS_MICRO;
+		switch (chan->type) {
+		case IIO_VOLTAGE:
+			switch (chan->differential) {
+			case 0:
+				/* only single ended adc -> 0.001333 */
+				*val = 0;
+				*val2 = 1333;
+				ret = IIO_VAL_INT_PLUS_MICRO;
+				break;
+			case 1:
+				/* all differential adc channels ->
+				 * 0.000001344 */
+				*val = 0;
+				*val2 = 1344;
+				ret = IIO_VAL_INT_PLUS_NANO;
+			}
+			break;
+		default:
 			break;
-		case 1:
-			/* all differential adc channels -> 0.000001344 */
-			*val = 0;
-			*val2 = 1344;
-			ret = IIO_VAL_INT_PLUS_NANO;
 		}
 		break;
 	case IIO_CHAN_INFO_CALIBBIAS:
@@ -298,6 +391,27 @@ static int iio_dummy_read_raw(struct iio_dev *indio_dev,
 		*val2 = 33;
 		ret = IIO_VAL_INT_PLUS_NANO;
 		break;
+	case IIO_CHAN_INFO_ENABLE:
+		switch (chan->type) {
+		case IIO_STEPS:
+			*val = st->steps_enabled;
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			break;
+		}
+		break;
+	case IIO_CHAN_INFO_CALIBHEIGHT:
+		switch (chan->type) {
+		case IIO_STEPS:
+			*val = st->height;
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			break;
+		}
+		break;
+
 	default:
 		break;
 	}
@@ -330,14 +444,45 @@ static int iio_dummy_write_raw(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		if (chan->output == 0)
+		switch (chan->type) {
+		case IIO_VOLTAGE:
+			if (chan->output == 0)
+				return -EINVAL;
+
+			/* Locking not required as writing single value */
+			mutex_lock(&st->lock);
+			st->dac_val = val;
+			mutex_unlock(&st->lock);
+			return 0;
+		default:
 			return -EINVAL;
-
-		/* Locking not required as writing single value */
-		mutex_lock(&st->lock);
-		st->dac_val = val;
-		mutex_unlock(&st->lock);
-		return 0;
+		}
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_STEPS:
+			mutex_lock(&st->lock);
+			st->steps = val;
+			mutex_unlock(&st->lock);
+			return 0;
+		case IIO_ACTIVITY:
+			if (val < 0)
+				val = 0;
+			if (val > 100)
+				val = 100;
+			switch (chan->channel2) {
+			case IIO_MOD_RUNNING:
+				st->activity_running = val;
+				return 0;
+			case IIO_MOD_WALKING:
+				st->activity_walking = val;
+				return 0;
+			default:
+				return -EINVAL;
+			}
+			break;
+		default:
+			return -EINVAL;
+		}
 	case IIO_CHAN_INFO_CALIBSCALE:
 		mutex_lock(&st->lock);
 		/* Compare against table - hard matching here */
@@ -356,6 +501,24 @@ static int iio_dummy_write_raw(struct iio_dev *indio_dev,
 		st->accel_calibbias = val;
 		mutex_unlock(&st->lock);
 		return 0;
+	case IIO_CHAN_INFO_ENABLE:
+		switch (chan->type) {
+		case IIO_STEPS:
+			mutex_lock(&st->lock);
+			st->steps_enabled = val;
+			mutex_unlock(&st->lock);
+			return 0;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_CALIBHEIGHT:
+		switch (chan->type) {
+		case IIO_STEPS:
+			st->height = val;
+			return 0;
+		default:
+			return -EINVAL;
+		}
 
 	default:
 		return -EINVAL;
@@ -395,6 +558,9 @@ static int iio_dummy_init_device(struct iio_dev *indio_dev)
 	st->accel_val = 34;
 	st->accel_calibbias = -7;
 	st->accel_calibscale = &dummy_scales[0];
+	st->steps = 47;
+	st->activity_running = 98;
+	st->activity_walking = 4;
 
 	return 0;
 }
@@ -475,13 +641,7 @@ static int iio_dummy_probe(int index)
 	if (ret < 0)
 		goto error_free_device;
 
-	/*
-	 * Configure buffered capture support and register the channels with the
-	 * buffer, but avoid the output channel being registered by reducing the
-	 * number of channels by 1.
-	 */
-	ret = iio_simple_dummy_configure_buffer(indio_dev,
-						iio_dummy_channels, 5);
+	ret = iio_simple_dummy_configure_buffer(indio_dev);
 	if (ret < 0)
 		goto error_unregister_events;
 
diff --git a/drivers/staging/iio/iio_simple_dummy.h b/drivers/staging/iio/iio_simple_dummy.h
index 3027aed79093..34989bf248a7 100644
--- a/drivers/staging/iio/iio_simple_dummy.h
+++ b/drivers/staging/iio/iio_simple_dummy.h
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 
 struct iio_dummy_accel_calibscale;
+struct iio_dummy_regs;
 
 /**
  * struct iio_dummy_state - device instance specific state.
@@ -33,8 +34,14 @@ struct iio_dummy_state {
 	int differential_adc_val[2];
 	int accel_val;
 	int accel_calibbias;
+	int activity_running;
+	int activity_walking;
 	const struct iio_dummy_accel_calibscale *accel_calibscale;
 	struct mutex lock;
+	struct iio_dummy_regs *regs;
+	int steps_enabled;
+	int steps;
+	int height;
 #ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
 	int event_irq;
 	int event_val;
@@ -107,12 +114,10 @@ enum iio_simple_dummy_scan_elements {
 };
 
 #ifdef CONFIG_IIO_SIMPLE_DUMMY_BUFFER
-int iio_simple_dummy_configure_buffer(struct iio_dev *indio_dev,
-	const struct iio_chan_spec *channels, unsigned int num_channels);
+int iio_simple_dummy_configure_buffer(struct iio_dev *indio_dev);
 void iio_simple_dummy_unconfigure_buffer(struct iio_dev *indio_dev);
 #else
-static inline int iio_simple_dummy_configure_buffer(struct iio_dev *indio_dev,
-	const struct iio_chan_spec *channels, unsigned int num_channels)
+static inline int iio_simple_dummy_configure_buffer(struct iio_dev *indio_dev)
 {
 	return 0;
 };
diff --git a/drivers/staging/iio/iio_simple_dummy_buffer.c b/drivers/staging/iio/iio_simple_dummy_buffer.c
index fd74f9166a5f..360a4c980722 100644
--- a/drivers/staging/iio/iio_simple_dummy_buffer.c
+++ b/drivers/staging/iio/iio_simple_dummy_buffer.c
@@ -115,14 +115,13 @@ static const struct iio_buffer_setup_ops iio_simple_dummy_buffer_setup_ops = {
 	.predisable = &iio_triggered_buffer_predisable,
 };
 
-int iio_simple_dummy_configure_buffer(struct iio_dev *indio_dev,
-	const struct iio_chan_spec *channels, unsigned int num_channels)
+int iio_simple_dummy_configure_buffer(struct iio_dev *indio_dev)
 {
 	int ret;
 	struct iio_buffer *buffer;
 
 	/* Allocate a buffer to use - here a kfifo */
-	buffer = iio_kfifo_allocate(indio_dev);
+	buffer = iio_kfifo_allocate();
 	if (buffer == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -173,14 +172,8 @@ int iio_simple_dummy_configure_buffer(struct iio_dev *indio_dev,
 	 */
 	indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
 
-	ret = iio_buffer_register(indio_dev, channels, num_channels);
-	if (ret)
-		goto error_dealloc_pollfunc;
-
 	return 0;
 
-error_dealloc_pollfunc:
-	iio_dealloc_pollfunc(indio_dev->pollfunc);
 error_free_buffer:
 	iio_kfifo_free(indio_dev->buffer);
 error_ret:
@@ -194,7 +187,6 @@ error_ret:
  */
 void iio_simple_dummy_unconfigure_buffer(struct iio_dev *indio_dev)
 {
-	iio_buffer_unregister(indio_dev);
 	iio_dealloc_pollfunc(indio_dev->pollfunc);
 	iio_kfifo_free(indio_dev->buffer);
 }
diff --git a/drivers/staging/iio/iio_simple_dummy_events.c b/drivers/staging/iio/iio_simple_dummy_events.c
index 64b45b077549..ac15a44ba271 100644
--- a/drivers/staging/iio/iio_simple_dummy_events.c
+++ b/drivers/staging/iio/iio_simple_dummy_events.c
@@ -72,6 +72,22 @@ int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev,
 				st->event_en = state;
 			else
 				return -EINVAL;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case IIO_ACTIVITY:
+		switch (type) {
+		case IIO_EV_TYPE_THRESH:
+			st->event_en = state;
+			break;
+		default:
+			return -EINVAL;
+		}
+	case IIO_STEPS:
+		switch (type) {
+		case IIO_EV_TYPE_INSTANCE:
+			st->event_en = state;
 			break;
 		default:
 			return -EINVAL;
@@ -148,12 +164,50 @@ int iio_simple_dummy_write_event_value(struct iio_dev *indio_dev,
 static irqreturn_t iio_simple_dummy_event_handler(int irq, void *private)
 {
 	struct iio_dev *indio_dev = private;
+	struct iio_dummy_state *st = iio_priv(indio_dev);
+
+	dev_dbg(&indio_dev->dev, "id %x event %x\n",
+		st->regs->reg_id, st->regs->reg_data);
+
+	switch (st->regs->reg_data) {
+	case 0:
+		iio_push_event(indio_dev,
+			       IIO_EVENT_CODE(IIO_VOLTAGE, 0, 0,
+					      IIO_EV_DIR_RISING,
+					      IIO_EV_TYPE_THRESH, 0, 0, 0),
+			       iio_get_time_ns());
+		break;
+	case 1:
+		if (st->activity_running > st->event_val)
+			iio_push_event(indio_dev,
+				       IIO_EVENT_CODE(IIO_ACTIVITY, 0,
+						      IIO_MOD_RUNNING,
+						      IIO_EV_DIR_RISING,
+						      IIO_EV_TYPE_THRESH,
+						      0, 0, 0),
+				       iio_get_time_ns());
+		break;
+	case 2:
+		if (st->activity_walking < st->event_val)
+			iio_push_event(indio_dev,
+				       IIO_EVENT_CODE(IIO_ACTIVITY, 0,
+						      IIO_MOD_WALKING,
+						      IIO_EV_DIR_FALLING,
+						      IIO_EV_TYPE_THRESH,
+						      0, 0, 0),
+				       iio_get_time_ns());
+		break;
+	case 3:
+		iio_push_event(indio_dev,
+			       IIO_EVENT_CODE(IIO_STEPS, 0, IIO_NO_MOD,
+					      IIO_EV_DIR_NONE,
+					      IIO_EV_TYPE_INSTANCE, 0, 0, 0),
+			       iio_get_time_ns());
+		break;
+	default:
+		break;
+	}
 
-	iio_push_event(indio_dev,
-		       IIO_EVENT_CODE(IIO_VOLTAGE, 0, 0,
-				      IIO_EV_DIR_RISING,
-				      IIO_EV_TYPE_THRESH, 0, 0, 0),
-		       iio_get_time_ns());
 	return IRQ_HANDLED;
 }
 
@@ -179,6 +233,8 @@ int iio_simple_dummy_events_register(struct iio_dev *indio_dev)
 		ret = st->event_irq;
 		goto error_ret;
 	}
+	st->regs = iio_dummy_evgen_get_regs(st->event_irq);
+
 	ret = request_threaded_irq(st->event_irq,
 				   NULL,
 				   &iio_simple_dummy_event_handler,
diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c
index b6bd609c3655..e90653ff9159 100644
--- a/drivers/staging/iio/impedance-analyzer/ad5933.c
+++ b/drivers/staging/iio/impedance-analyzer/ad5933.c
@@ -89,7 +89,6 @@
 struct ad5933_state {
 	struct i2c_client		*client;
 	struct regulator		*reg;
-	struct ad5933_platform_data	*pdata;
 	struct delayed_work		work;
 	unsigned long			mclk_hz;
 	unsigned char			ctrl_hb;
@@ -113,7 +112,8 @@ static const struct iio_chan_spec ad5933_channels[] = {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE),
 		.address = AD5933_REG_TEMP_DATA,
 		.scan_index = -1,
 		.scan_type = {
@@ -520,12 +520,11 @@ static int ad5933_read_raw(struct iio_dev *indio_dev,
 {
 	struct ad5933_state *st = iio_priv(indio_dev);
 	__be16 dat;
-	int ret = -EINVAL;
+	int ret;
 
-	mutex_lock(&indio_dev->mlock);
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
-	case IIO_CHAN_INFO_PROCESSED:
+		mutex_lock(&indio_dev->mlock);
 		if (iio_buffer_enabled(indio_dev)) {
 			ret = -EBUSY;
 			goto out;
@@ -543,16 +542,16 @@ static int ad5933_read_raw(struct iio_dev *indio_dev,
 		if (ret < 0)
 			goto out;
 		mutex_unlock(&indio_dev->mlock);
-		ret = be16_to_cpu(dat);
-		/* Temp in Milli degrees Celsius */
-		if (ret < 8192)
-			*val = ret * 1000 / 32;
-		else
-			*val = (ret - 16384) * 1000 / 32;
+		*val = sign_extend32(be16_to_cpu(dat), 13);
 
 		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 1000;
+		*val2 = 5;
+		return IIO_VAL_FRACTIONAL_LOG2;
 	}
 
+	return -EINVAL;
 out:
 	mutex_unlock(&indio_dev->mlock);
 	return ret;
@@ -626,7 +625,7 @@ static int ad5933_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 {
 	struct iio_buffer *buffer;
 
-	buffer = iio_kfifo_allocate(indio_dev);
+	buffer = iio_kfifo_allocate();
 	if (!buffer)
 		return -ENOMEM;
 
@@ -712,9 +711,7 @@ static int ad5933_probe(struct i2c_client *client,
 	st->client = client;
 
 	if (!pdata)
-		st->pdata = &ad5933_default_pdata;
-	else
-		st->pdata = pdata;
+		pdata = &ad5933_default_pdata;
 
 	st->reg = devm_regulator_get(&client->dev, "vcc");
 	if (!IS_ERR(st->reg)) {
@@ -727,10 +724,10 @@ static int ad5933_probe(struct i2c_client *client,
 	if (voltage_uv)
 		st->vref_mv = voltage_uv / 1000;
 	else
-		st->vref_mv = st->pdata->vref_mv;
+		st->vref_mv = pdata->vref_mv;
 
-	if (st->pdata->ext_clk_Hz) {
-		st->mclk_hz = st->pdata->ext_clk_Hz;
+	if (pdata->ext_clk_Hz) {
+		st->mclk_hz = pdata->ext_clk_Hz;
 		st->ctrl_lb = AD5933_CTRL_EXT_SYSCLK;
 	} else {
 		st->mclk_hz = AD5933_INT_OSC_FREQ_Hz;
@@ -752,27 +749,16 @@ static int ad5933_probe(struct i2c_client *client,
 	if (ret)
 		goto error_disable_reg;
 
-	ret = iio_buffer_register(indio_dev, ad5933_channels,
-		ARRAY_SIZE(ad5933_channels));
-	if (ret)
-		goto error_unreg_ring;
-
-	/* enable both REAL and IMAG channels by default */
-	iio_scan_mask_set(indio_dev, indio_dev->buffer, 0);
-	iio_scan_mask_set(indio_dev, indio_dev->buffer, 1);
-
 	ret = ad5933_setup(st);
 	if (ret)
-		goto error_uninitialize_ring;
+		goto error_unreg_ring;
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
-		goto error_uninitialize_ring;
+		goto error_unreg_ring;
 
 	return 0;
 
-error_uninitialize_ring:
-	iio_buffer_unregister(indio_dev);
 error_unreg_ring:
 	iio_kfifo_free(indio_dev->buffer);
 error_disable_reg:
@@ -788,7 +774,6 @@ static int ad5933_remove(struct i2c_client *client)
 	struct ad5933_state *st = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	iio_buffer_unregister(indio_dev);
 	iio_kfifo_free(indio_dev->buffer);
 	if (!IS_ERR(st->reg))
 		regulator_disable(st->reg);
diff --git a/drivers/staging/iio/meter/ade7758.h b/drivers/staging/iio/meter/ade7758.h
index e8c98cf57070..f6739e2c24b1 100644
--- a/drivers/staging/iio/meter/ade7758.h
+++ b/drivers/staging/iio/meter/ade7758.h
@@ -145,7 +145,6 @@ ssize_t ade7758_read_data_from_ring(struct device *dev,
 int ade7758_configure_ring(struct iio_dev *indio_dev);
 void ade7758_unconfigure_ring(struct iio_dev *indio_dev);
 
-void ade7758_uninitialize_ring(struct iio_dev *indio_dev);
 int ade7758_set_irq(struct device *dev, bool enable);
 
 int ade7758_spi_write_reg_8(struct device *dev,
diff --git a/drivers/staging/iio/meter/ade7758_core.c b/drivers/staging/iio/meter/ade7758_core.c
index fb373b89dcc2..70e96b20c2eb 100644
--- a/drivers/staging/iio/meter/ade7758_core.c
+++ b/drivers/staging/iio/meter/ade7758_core.c
@@ -850,23 +850,15 @@ static int ade7758_probe(struct spi_device *spi)
 	if (ret)
 		goto error_free_tx;
 
-	ret = iio_buffer_register(indio_dev,
-				  &ade7758_channels[0],
-				  ARRAY_SIZE(ade7758_channels));
-	if (ret) {
-		dev_err(&spi->dev, "failed to initialize the ring\n");
-		goto error_unreg_ring_funcs;
-	}
-
 	/* Get the device into a sane initial state */
 	ret = ade7758_initial_setup(indio_dev);
 	if (ret)
-		goto error_uninitialize_ring;
+		goto error_unreg_ring_funcs;
 
 	if (spi->irq) {
 		ret = ade7758_probe_trigger(indio_dev);
 		if (ret)
-			goto error_uninitialize_ring;
+			goto error_unreg_ring_funcs;
 	}
 
 	ret = iio_device_register(indio_dev);
@@ -878,8 +870,6 @@ static int ade7758_probe(struct spi_device *spi)
 error_remove_trigger:
 	if (spi->irq)
 		ade7758_remove_trigger(indio_dev);
-error_uninitialize_ring:
-	ade7758_uninitialize_ring(indio_dev);
 error_unreg_ring_funcs:
 	ade7758_unconfigure_ring(indio_dev);
 error_free_tx:
@@ -897,7 +887,6 @@ static int ade7758_remove(struct spi_device *spi)
 	iio_device_unregister(indio_dev);
 	ade7758_stop_device(&indio_dev->dev);
 	ade7758_remove_trigger(indio_dev);
-	ade7758_uninitialize_ring(indio_dev);
 	ade7758_unconfigure_ring(indio_dev);
 	kfree(st->tx);
 	kfree(st->rx);
diff --git a/drivers/staging/iio/meter/ade7758_ring.c b/drivers/staging/iio/meter/ade7758_ring.c
index 6e9006490742..3792b5761645 100644
--- a/drivers/staging/iio/meter/ade7758_ring.c
+++ b/drivers/staging/iio/meter/ade7758_ring.c
@@ -118,7 +118,7 @@ int ade7758_configure_ring(struct iio_dev *indio_dev)
 	struct iio_buffer *buffer;
 	int ret = 0;
 
-	buffer = iio_kfifo_allocate(indio_dev);
+	buffer = iio_kfifo_allocate();
 	if (!buffer) {
 		ret = -ENOMEM;
 		return ret;
@@ -180,8 +180,3 @@ error_iio_kfifo_free:
 	iio_kfifo_free(indio_dev->buffer);
 	return ret;
 }
-
-void ade7758_uninitialize_ring(struct iio_dev *indio_dev)
-{
-	iio_buffer_unregister(indio_dev);
-}
diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c
index 7d217430616a..b0c7dbc8a428 100644
--- a/drivers/staging/iio/meter/ade7759.c
+++ b/drivers/staging/iio/meter/ade7759.c
@@ -116,7 +116,7 @@ static int ade7759_spi_read_reg_40(struct device *dev,
 
 	mutex_lock(&st->buf_lock);
 	st->tx[0] = ADE7759_READ_REG(reg_address);
-	memset(&st->tx[1], 0 , 5);
+	memset(&st->tx[1], 0, 5);
 
 	ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers));
 	if (ret) {
diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h
index 519392763393..b65850a41127 100644
--- a/include/linux/iio/buffer.h
+++ b/include/linux/iio/buffer.h
@@ -25,9 +25,7 @@ struct iio_buffer;
  *			available.
  * @request_update:	if a parameter change has been marked, update underlying
  *			storage.
- * @get_bytes_per_datum:get current bytes per datum
  * @set_bytes_per_datum:set number of bytes per datum
- * @get_length:		get number of datums in buffer
  * @set_length:		set number of datums in buffer
  * @release:		called when the last reference to the buffer is dropped,
  *			should free all resources allocated by the buffer.
@@ -49,9 +47,7 @@ struct iio_buffer_access_funcs {
 
 	int (*request_update)(struct iio_buffer *buffer);
 
-	int (*get_bytes_per_datum)(struct iio_buffer *buffer);
 	int (*set_bytes_per_datum)(struct iio_buffer *buffer, size_t bpd);
-	int (*get_length)(struct iio_buffer *buffer);
 	int (*set_length)(struct iio_buffer *buffer, int length);
 
 	void (*release)(struct iio_buffer *buffer);
@@ -85,10 +81,11 @@ struct iio_buffer {
 	bool					scan_timestamp;
 	const struct iio_buffer_access_funcs	*access;
 	struct list_head			scan_el_dev_attr_list;
+	struct attribute_group			buffer_group;
 	struct attribute_group			scan_el_group;
 	wait_queue_head_t			pollq;
 	bool					stufftoread;
-	const struct attribute_group *attrs;
+	const struct attribute			**attrs;
 	struct list_head			demux_list;
 	void					*demux_bounce;
 	struct list_head			buffer_list;
@@ -117,15 +114,6 @@ int iio_scan_mask_query(struct iio_dev *indio_dev,
 			struct iio_buffer *buffer, int bit);
 
 /**
- * iio_scan_mask_set() - set particular bit in the scan mask
- * @indio_dev		IIO device structure
- * @buffer:		the buffer whose scan mask we are interested in
- * @bit:		the bit to be set.
- **/
-int iio_scan_mask_set(struct iio_dev *indio_dev,
-		      struct iio_buffer *buffer, int bit);
-
-/**
  * iio_push_to_buffers() - push to a registered buffer.
  * @indio_dev:		iio_dev structure for device.
  * @data:		Full scan.
@@ -159,56 +147,6 @@ static inline int iio_push_to_buffers_with_timestamp(struct iio_dev *indio_dev,
 
 int iio_update_demux(struct iio_dev *indio_dev);
 
-/**
- * iio_buffer_register() - register the buffer with IIO core
- * @indio_dev:		device with the buffer to be registered
- * @channels:		the channel descriptions used to construct buffer
- * @num_channels:	the number of channels
- **/
-int iio_buffer_register(struct iio_dev *indio_dev,
-			const struct iio_chan_spec *channels,
-			int num_channels);
-
-/**
- * iio_buffer_unregister() - unregister the buffer from IIO core
- * @indio_dev:		the device with the buffer to be unregistered
- **/
-void iio_buffer_unregister(struct iio_dev *indio_dev);
-
-/**
- * iio_buffer_read_length() - attr func to get number of datums in the buffer
- **/
-ssize_t iio_buffer_read_length(struct device *dev,
-			       struct device_attribute *attr,
-			       char *buf);
-/**
- * iio_buffer_write_length() - attr func to set number of datums in the buffer
- **/
-ssize_t iio_buffer_write_length(struct device *dev,
-			      struct device_attribute *attr,
-			      const char *buf,
-			      size_t len);
-/**
- * iio_buffer_store_enable() - attr to turn the buffer on
- **/
-ssize_t iio_buffer_store_enable(struct device *dev,
-				struct device_attribute *attr,
-				const char *buf,
-				size_t len);
-/**
- * iio_buffer_show_enable() - attr to see if the buffer is on
- **/
-ssize_t iio_buffer_show_enable(struct device *dev,
-			       struct device_attribute *attr,
-			       char *buf);
-#define IIO_BUFFER_LENGTH_ATTR DEVICE_ATTR(length, S_IRUGO | S_IWUSR,	\
-					   iio_buffer_read_length,	\
-					   iio_buffer_write_length)
-
-#define IIO_BUFFER_ENABLE_ATTR DEVICE_ATTR(enable, S_IRUGO | S_IWUSR,	\
-					   iio_buffer_show_enable,	\
-					   iio_buffer_store_enable)
-
 bool iio_validate_scan_mask_onehot(struct iio_dev *indio_dev,
 	const unsigned long *mask);
 
@@ -232,16 +170,6 @@ static inline void iio_device_attach_buffer(struct iio_dev *indio_dev,
 
 #else /* CONFIG_IIO_BUFFER */
 
-static inline int iio_buffer_register(struct iio_dev *indio_dev,
-					   const struct iio_chan_spec *channels,
-					   int num_channels)
-{
-	return 0;
-}
-
-static inline void iio_buffer_unregister(struct iio_dev *indio_dev)
-{}
-
 static inline void iio_buffer_get(struct iio_buffer *buffer) {}
 static inline void iio_buffer_put(struct iio_buffer *buffer) {}
 
diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
index 651f9a0e2765..26fb8f6342bb 100644
--- a/include/linux/iio/consumer.h
+++ b/include/linux/iio/consumer.h
@@ -151,6 +151,16 @@ int iio_read_channel_average_raw(struct iio_channel *chan, int *val);
 int iio_read_channel_processed(struct iio_channel *chan, int *val);
 
 /**
+ * iio_write_channel_raw() - write to a given channel
+ * @chan:		The channel being queried.
+ * @val:		Value being written.
+ *
+ * Note raw writes to iio channels are in dac counts and hence
+ * scale will need to be applied if standard units required.
+ */
+int iio_write_channel_raw(struct iio_channel *chan, int val);
+
+/**
  * iio_get_channel_type() - get the type of a channel
  * @channel:		The channel being queried.
  * @type:		The type of the channel.
@@ -191,7 +201,7 @@ int iio_read_channel_scale(struct iio_channel *chan, int *val,
  * The scale factor allows to increase the precession of the returned value. For
  * a scale factor of 1 the function will return the result in the normal IIO
  * unit for the channel type. E.g. millivolt for voltage channels, if you want
- * nanovolts instead pass 1000 as the scale factor.
+ * nanovolts instead pass 1000000 as the scale factor.
  */
 int iio_convert_raw_to_processed(struct iio_channel *chan, int raw,
 	int *processed, unsigned int scale);
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index 3642ce7ef512..878d861b0610 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -38,6 +38,8 @@ enum iio_chan_info_enum {
 	IIO_CHAN_INFO_HARDWAREGAIN,
 	IIO_CHAN_INFO_HYSTERESIS,
 	IIO_CHAN_INFO_INT_TIME,
+	IIO_CHAN_INFO_ENABLE,
+	IIO_CHAN_INFO_CALIBHEIGHT,
 };
 
 enum iio_shared_by {
diff --git a/include/linux/iio/kfifo_buf.h b/include/linux/iio/kfifo_buf.h
index 25eeac762e84..1683bc710d14 100644
--- a/include/linux/iio/kfifo_buf.h
+++ b/include/linux/iio/kfifo_buf.h
@@ -5,7 +5,10 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
 
-struct iio_buffer *iio_kfifo_allocate(struct iio_dev *indio_dev);
+struct iio_buffer *iio_kfifo_allocate(void);
 void iio_kfifo_free(struct iio_buffer *r);
 
+struct iio_buffer *devm_iio_kfifo_allocate(struct device *dev);
+void devm_iio_kfifo_free(struct device *dev, struct iio_buffer *r);
+
 #endif
diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
index 4a2af8adf874..904dcbbf0e6f 100644
--- a/include/linux/iio/types.h
+++ b/include/linux/iio/types.h
@@ -30,6 +30,8 @@ enum iio_chan_type {
 	IIO_CCT,
 	IIO_PRESSURE,
 	IIO_HUMIDITYRELATIVE,
+	IIO_ACTIVITY,
+	IIO_STEPS,
 };
 
 enum iio_modifier {
@@ -59,7 +61,11 @@ enum iio_modifier {
 	IIO_MOD_NORTH_MAGN,
 	IIO_MOD_NORTH_TRUE,
 	IIO_MOD_NORTH_MAGN_TILT_COMP,
-	IIO_MOD_NORTH_TRUE_TILT_COMP
+	IIO_MOD_NORTH_TRUE_TILT_COMP,
+	IIO_MOD_RUNNING,
+	IIO_MOD_JOGGING,
+	IIO_MOD_WALKING,
+	IIO_MOD_STILL,
 };
 
 enum iio_event_type {
@@ -68,6 +74,7 @@ enum iio_event_type {
 	IIO_EV_TYPE_ROC,
 	IIO_EV_TYPE_THRESH_ADAPTIVE,
 	IIO_EV_TYPE_MAG_ADAPTIVE,
+	IIO_EV_TYPE_INSTANCE,
 };
 
 enum iio_event_info {
@@ -81,6 +88,7 @@ enum iio_event_direction {
 	IIO_EV_DIR_EITHER,
 	IIO_EV_DIR_RISING,
 	IIO_EV_DIR_FALLING,
+	IIO_EV_DIR_NONE,
 };
 
 #define IIO_VAL_INT 1