talos-obmc-linux/kernel/bpf/syscall.c, branch dev-4.13-fsi

bpf: do not disable/enable BH in bpf_map_free_id()

2017-10-12T09:56:03+00:00

[ Upstream commit 930651a75bf1ba6893a8b8475270664ebdb6cf4a ] syzkaller reported following splat [1] Since hard irq are disabled by the caller, bpf_map_free_id() should not try to enable/disable BH. Another solution would be to change htab_map_delete_elem() to defer the free_htab_elem() call after raw_spin_unlock_irqrestore(&b->lock, flags), but this might be not enough to cover other code paths. [1] WARNING: CPU: 1 PID: 8052 at kernel/softirq.c:161 __local_bh_enable_ip +0x1e/0x160 kernel/softirq.c:161 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 8052 Comm: syz-executor1 Not tainted 4.13.0-next-20170915+ #23 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x417 kernel/panic.c:181 __warn+0x1c4/0x1d9 kernel/panic.c:542 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:178 do_trap_no_signal arch/x86/kernel/traps.c:212 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:261 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:298 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:311 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:__local_bh_enable_ip+0x1e/0x160 kernel/softirq.c:161 RSP: 0018:ffff8801cdcd7748 EFLAGS: 00010046 RAX: 0000000000000082 RBX: 0000000000000201 RCX: 0000000000000000 RDX: 1ffffffff0b5933c RSI: 0000000000000201 RDI: ffffffff85ac99e0 RBP: ffff8801cdcd7758 R08: ffffffff85b87158 R09: 1ffff10039b9aec6 R10: ffff8801c99f24c0 R11: 0000000000000002 R12: ffffffff817b0b47 R13: dffffc0000000000 R14: ffff8801cdcd77e8 R15: 0000000000000001 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:176 [inline] _raw_spin_unlock_bh+0x30/0x40 kernel/locking/spinlock.c:207 spin_unlock_bh include/linux/spinlock.h:361 [inline] bpf_map_free_id kernel/bpf/syscall.c:197 [inline] __bpf_map_put+0x267/0x320 kernel/bpf/syscall.c:227 bpf_map_put+0x1a/0x20 kernel/bpf/syscall.c:235 bpf_map_fd_put_ptr+0x15/0x20 kernel/bpf/map_in_map.c:96 free_htab_elem+0xc3/0x1b0 kernel/bpf/hashtab.c:658 htab_map_delete_elem+0x74d/0x970 kernel/bpf/hashtab.c:1063 map_delete_elem kernel/bpf/syscall.c:633 [inline] SYSC_bpf kernel/bpf/syscall.c:1479 [inline] SyS_bpf+0x2188/0x46a0 kernel/bpf/syscall.c:1451 entry_SYSCALL_64_fastpath+0x1f/0xbe Fixes: f3f1c054c288 ("bpf: Introduce bpf_map ID") Signed-off-by: Eric Dumazet Cc: Martin KaFai Lau Acked-by: Martin KaFai Lau Acked-by: Daniel Borkmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_len

2017-07-30T06:29:41+00:00

bpf_prog_size(prog->len) is not the correct length we want to dump back to user space. The code in bpf_prog_get_info_by_fd() uses this to copy prog->insnsi to user space, but bpf_prog_size(prog->len) also includes the size of struct bpf_prog itself plus program instructions and is usually used either in context of accounting or for bpf_prog_alloc() et al, thus we copy out of bounds in bpf_prog_get_info_by_fd() potentially. Use the correct bpf_prog_insn_size() instead. Fixes: 1e2709769086 ("bpf: Add BPF_OBJ_GET_INFO_BY_FD") Signed-off-by: Daniel Borkmann Acked-by: Martin KaFai Lau Signed-off-by: David S. Miller

bpf: don't indicate success when copy_from_user fails

2017-07-29T21:28:54+00:00

err in bpf_prog_get_info_by_fd() still holds 0 at that time from prior check_uarg_tail_zero() check. Explicitly return -EFAULT instead, so user space can be notified of buggy behavior. Fixes: 1e2709769086 ("bpf: Add BPF_OBJ_GET_INFO_BY_FD") Signed-off-by: Daniel Borkmann Acked-by: Martin KaFai Lau Signed-off-by: David S. Miller

Merge branch 'work.memdup_user' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2017-07-05T23:05:24+00:00

Pull memdup_user() conversions from Al Viro: "A fairly self-contained series - hunting down open-coded memdup_user() and memdup_user_nul() instances" * 'work.memdup_user' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: bpf: don't open-code memdup_user() kimage_file_prepare_segments(): don't open-code memdup_user() ethtool: don't open-code memdup_user() do_ip_setsockopt(): don't open-code memdup_user() do_ipv6_setsockopt(): don't open-code memdup_user() irda: don't open-code memdup_user() xfrm_user_policy(): don't open-code memdup_user() ima_write_policy(): don't open-code memdup_user_nul() sel_write_validatetrans(): don't open-code memdup_user_nul()

bpf: export whether tail call has jited owner

2017-07-03T09:22:52+00:00

We do export through fdinfo already whether a prog is JITed or not, given a program load can fail in case of either prog or tail call map has JITed property, but neither both are JITed or not JITed, we can facilitate error reporting in loaders like iproute2 through exporting owner_jited of tail call map. We already do export owner_prog_type through this facility, so parser can pick up both for comparison. Signed-off-by: Daniel Borkmann Acked-by: John Fastabend Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller

bpf: BPF support for sock_ops

2017-07-01T23:15:13+00:00

Created a new BPF program type, BPF_PROG_TYPE_SOCK_OPS, and a corresponding struct that allows BPF programs of this type to access some of the socket's fields (such as IP addresses, ports, etc.). It uses the existing bpf cgroups infrastructure so the programs can be attached per cgroup with full inheritance support. The program will be called at appropriate times to set relevant connections parameters such as buffer sizes, SYN and SYN-ACK RTOs, etc., based on connection information such as IP addresses, port numbers, etc. Alghough there are already 3 mechanisms to set parameters (sysctls, route metrics and setsockopts), this new mechanism provides some distinct advantages. Unlike sysctls, it can set parameters per connection. In contrast to route metrics, it can also use port numbers and information provided by a user level program. In addition, it could set parameters probabilistically for evaluation purposes (i.e. do something different on 10% of the flows and compare results with the other 90% of the flows). Also, in cases where IPv6 addresses contain geographic information, the rules to make changes based on the distance (or RTT) between the hosts are much easier than route metric rules and can be global. Finally, unlike setsockopt, it oes not require application changes and it can be updated easily at any time. Although the bpf cgroup framework already contains a sock related program type (BPF_PROG_TYPE_CGROUP_SOCK), I created the new type (BPF_PROG_TYPE_SOCK_OPS) beccause the existing type expects to be called only once during the connections's lifetime. In contrast, the new program type will be called multiple times from different places in the network stack code. For example, before sending SYN and SYN-ACKs to set an appropriate timeout, when the connection is established to set congestion control, etc. As a result it has "op" field to specify the type of operation requested. The purpose of this new program type is to simplify setting connection parameters, such as buffer sizes, TCP's SYN RTO, etc. For example, it is easy to use facebook's internal IPv6 addresses to determine if both hosts of a connection are in the same datacenter. Therefore, it is easy to write a BPF program to choose a small SYN RTO value when both hosts are in the same datacenter. This patch only contains the framework to support the new BPF program type, following patches add the functionality to set various connection parameters. This patch defines a new BPF program type: BPF_PROG_TYPE_SOCKET_OPS and a new bpf syscall command to load a new program of this type: BPF_PROG_LOAD_SOCKET_OPS. Two new corresponding structs (one for the kernel one for the user/BPF program): /* kernel version */ struct bpf_sock_ops_kern { struct sock *sk; __u32 op; union { __u32 reply; __u32 replylong[4]; }; }; /* user version * Some fields are in network byte order reflecting the sock struct * Use the bpf_ntohl helper macro in samples/bpf/bpf_endian.h to * convert them to host byte order. */ struct bpf_sock_ops { __u32 op; union { __u32 reply; __u32 replylong[4]; }; __u32 family; __u32 remote_ip4; /* In network byte order */ __u32 local_ip4; /* In network byte order */ __u32 remote_ip6[4]; /* In network byte order */ __u32 local_ip6[4]; /* In network byte order */ __u32 remote_port; /* In network byte order */ __u32 local_port; /* In host byte horder */ }; Currently there are two types of ops. The first type expects the BPF program to return a value which is then used by the caller (or a negative value to indicate the operation is not supported). The second type expects state changes to be done by the BPF program, for example through a setsockopt BPF helper function, and they ignore the return value. The reply fields of the bpf_sockt_ops struct are there in case a bpf program needs to return a value larger than an integer. Signed-off-by: Lawrence Brakmo Acked-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller

bpf: don't open-code memdup_user()

2017-06-30T06:04:11+00:00

Signed-off-by: Al Viro

bpf: Add syscall lookup support for fd array and htab

2017-06-29T17:13:25+00:00

This patch allows userspace to do BPF_MAP_LOOKUP_ELEM on BPF_MAP_TYPE_PROG_ARRAY, BPF_MAP_TYPE_ARRAY_OF_MAPS and BPF_MAP_TYPE_HASH_OF_MAPS. The lookup returns a prog-id or map-id to the userspace. The userspace can then use the BPF_PROG_GET_FD_BY_ID or BPF_MAP_GET_FD_BY_ID to get a fd. Signed-off-by: Martin KaFai Lau Acked-by: Daniel Borkmann Signed-off-by: David S. Miller

bpf: Add BPF_OBJ_GET_INFO_BY_FD

2017-06-06T19:41:24+00:00

A single BPF_OBJ_GET_INFO_BY_FD cmd is used to obtain the info for both bpf_prog and bpf_map. The kernel can figure out the fd is associated with a bpf_prog or bpf_map. The suggested struct bpf_prog_info and struct bpf_map_info are not meant to be a complete list and it is not the goal of this patch. New fields can be added in the future patch. The focus of this patch is to create the interface, BPF_OBJ_GET_INFO_BY_FD cmd for exposing the bpf_prog's and bpf_map's info. The obj's info, which will be extended (and get bigger) over time, is separated from the bpf_attr to avoid bloating the bpf_attr. Signed-off-by: Martin KaFai Lau Acked-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller

bpf: Add BPF_MAP_GET_FD_BY_ID

2017-06-06T19:41:23+00:00

Add BPF_MAP_GET_FD_BY_ID command to allow user to get a fd from a bpf_map's ID. bpf_map_inc_not_zero() is added and is called with map_idr_lock held. __bpf_map_put() is also added which has the 'bool do_idr_lock' param to decide if the map_idr_lock should be acquired when freeing the map->id. In the error path of bpf_map_inc_not_zero(), it may have to call __bpf_map_put(map, false) which does not need to take the map_idr_lock when freeing the map->id. It is currently limited to CAP_SYS_ADMIN which we can consider to lift it in followup patches. Signed-off-by: Martin KaFai Lau Acked-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller