talos-obmc-linux/include/linux/bpf.h, branch dev-4.13-fsi

bpf: simplify narrower ctx access

2017-07-03T09:22:52+00:00

This work tries to make the semantics and code around the narrower ctx access a bit easier to follow. Right now everything is done inside the .is_valid_access(). Offset matching is done differently for read/write types, meaning writes don't support narrower access and thus matching only on offsetof(struct foo, bar) is enough whereas for read case that supports narrower access we must check for offsetof(struct foo, bar) + offsetof(struct foo, bar) + sizeof() - 1 for each of the cases. For read cases of individual members that don't support narrower access (like packet pointers or skb->cb[] case which has its own narrow access logic), we check as usual only offsetof(struct foo, bar) like in write case. Then, for the case where narrower access is allowed, we also need to set the aux info for the access. Meaning, ctx_field_size and converted_op_size have to be set. First is the original field size e.g. sizeof() as in above example from the user facing ctx, and latter one is the target size after actual rewrite happened, thus for the kernel facing ctx. Also here we need the range match and we need to keep track changing convert_ctx_access() and converted_op_size from is_valid_access() as both are not at the same location. We can simplify the code a bit: check_ctx_access() becomes simpler in that we only store ctx_field_size as a meta data and later in convert_ctx_accesses() we fetch the target_size right from the location where we do convert. Should the verifier be misconfigured we do reject for BPF_WRITE cases or target_size that are not provided. For the subsystems, we always work on ranges in is_valid_access() and add small helpers for ranges and narrow access, convert_ctx_accesses() sets target_size for the relevant instruction. Signed-off-by: Daniel Borkmann Acked-by: John Fastabend Cc: Yonghong Song Signed-off-by: David S. Miller

bpf: Add syscall lookup support for fd array and htab

2017-06-29T17:13:25+00:00

This patch allows userspace to do BPF_MAP_LOOKUP_ELEM on BPF_MAP_TYPE_PROG_ARRAY, BPF_MAP_TYPE_ARRAY_OF_MAPS and BPF_MAP_TYPE_HASH_OF_MAPS. The lookup returns a prog-id or map-id to the userspace. The userspace can then use the BPF_PROG_GET_FD_BY_ID or BPF_MAP_GET_FD_BY_ID to get a fd. Signed-off-by: Martin KaFai Lau Acked-by: Daniel Borkmann Signed-off-by: David S. Miller

bpf: possibly avoid extra masking for narrower load in verifier

2017-06-23T18:04:11+00:00

Commit 31fd85816dbe ("bpf: permits narrower load from bpf program context fields") permits narrower load for certain ctx fields. The commit however will already generate a masking even if the prog-specific ctx conversion produces the result with narrower size. For example, for __sk_buff->protocol, the ctx conversion loads the data into register with 2-byte load. A narrower 2-byte load should not generate masking. For __sk_buff->vlan_present, the conversion function set the result as either 0 or 1, essentially a byte. The narrower 2-byte or 1-byte load should not generate masking. To avoid unnecessary masking, prog-specific *_is_valid_access now passes converted_op_size back to verifier, which indicates the valid data width after perceived future conversion. Based on this information, verifier is able to avoid unnecessary marking. Since we want more information back from prog-specific *_is_valid_access checking, all of them are packed into one data structure for more clarity. Acked-by: Daniel Borkmann Signed-off-by: Yonghong Song Signed-off-by: David S. Miller

bpf: permits narrower load from bpf program context fields

2017-06-14T18:56:25+00:00

Currently, verifier will reject a program if it contains an narrower load from the bpf context structure. For example, __u8 h = __sk_buff->hash, or __u16 p = __sk_buff->protocol __u32 sample_period = bpf_perf_event_data->sample_period which are narrower loads of 4-byte or 8-byte field. This patch solves the issue by: . Introduce a new parameter ctx_field_size to carry the field size of narrower load from prog type specific *__is_valid_access validator back to verifier. . The non-zero ctx_field_size for a memory access indicates (1). underlying prog type specific convert_ctx_accesses supporting non-whole-field access (2). the current insn is a narrower or whole field access. . In verifier, for such loads where load memory size is less than ctx_field_size, verifier transforms it to a full field load followed by proper masking. . Currently, __sk_buff and bpf_perf_event_data->sample_period are supporting narrowing loads. . Narrower stores are still not allowed as typical ctx stores are just normal stores. Because of this change, some tests in verifier will fail and these tests are removed. As a bonus, rename some out of bound __sk_buff->cb access to proper field name and remove two redundant "skb cb oob" tests. Acked-by: Daniel Borkmann Signed-off-by: Yonghong Song Signed-off-by: David S. Miller

bpf: Introduce bpf_map ID

2017-06-06T19:41:22+00:00

This patch generates an unique ID for each created bpf_map. The approach is similar to the earlier patch for bpf_prog ID. It is worth to note that the bpf_map's ID and bpf_prog's ID are in two independent ID spaces and both have the same valid range: [1, INT_MAX). Signed-off-by: Martin KaFai Lau Acked-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller

bpf: Introduce bpf_prog ID

2017-06-06T19:41:22+00:00

This patch generates an unique ID for each BPF_PROG_LOAD-ed prog. It is worth to note that each BPF_PROG_LOAD-ed prog will have a different ID even they have the same bpf instructions. The ID is generated by the existing idr_alloc_cyclic(). The ID is ranged from [1, INT_MAX). It is allocated in cyclic manner, so an ID will get reused every 2 billion BPF_PROG_LOAD. The bpf_prog_alloc_id() is done after bpf_prog_select_runtime() because the jit process may have allocated a new prog. Hence, we need to ensure the value of pointer 'prog' will not be changed any more before storing the prog to the prog_idr. After bpf_prog_select_runtime(), the prog is read-only. Hence, the id is stored in 'struct bpf_prog_aux'. Signed-off-by: Martin KaFai Lau Acked-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller

bpf: teach verifier to track stack depth

2017-05-31T23:29:47+00:00

teach verifier to track bpf program stack depth Signed-off-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller

bpf: remove struct bpf_map_type_list

2017-04-11T18:38:43+00:00

There's no need to have struct bpf_map_type_list since it just contains a list_head, the type, and the ops pointer. Since the types are densely packed and not actually dynamically registered, it's much easier and smaller to have an array of type->ops pointer. Also initialize this array statically to remove code needed to initialize it. In order to save duplicating the list, move it to the types header file added by the previous patch and include it in the same fashion. Signed-off-by: Johannes Berg Acked-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller

bpf: remove struct bpf_prog_type_list

2017-04-11T18:38:43+00:00

There's no need to have struct bpf_prog_type_list since it just contains a list_head, the type, and the ops pointer. Since the types are densely packed and not actually dynamically registered, it's much easier and smaller to have an array of type->ops pointer. Also initialize this array statically to remove code needed to initialize it. In order to save duplicating the list, move it to a new header file and include it in the places needing it. Signed-off-by: Johannes Berg Acked-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller

bpf: introduce BPF_PROG_TEST_RUN command

2017-04-01T19:45:57+00:00

development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov Acked-by: Daniel Borkmann Acked-by: Martin KaFai Lau Signed-off-by: David S. Miller