talos-obmc-linux/drivers/target, branch dev-4.13

target: Fix node_acl demo-mode + uncached dynamic shutdown regression

2017-08-10T03:55:19+00:00

This patch fixes a generate_node_acls = 1 + cache_dynamic_acls = 0 regression, that was introduced by commit 01d4d673558985d9a118e1e05026633c3e2ade9b Author: Nicholas Bellinger Date: Wed Dec 7 12:55:54 2016 -0800 which originally had the proper list_del_init() usage, but was dropped during list review as it was thought unnecessary by HCH. However, list_del_init() usage is required during the special generate_node_acls = 1 + cache_dynamic_acls = 0 case when transport_free_session() does a list_del(&se_nacl->acl_list), followed by target_complete_nacl() doing the same thing. This was manifesting as a general protection fault as reported by Justin: kernel: general protection fault: 0000 [#1] SMP kernel: Modules linked in: kernel: CPU: 0 PID: 11047 Comm: iscsi_ttx Not tainted 4.13.0-rc2.x86_64.1+ #20 kernel: Hardware name: Intel Corporation S5500BC/S5500BC, BIOS S5500.86B.01.00.0064.050520141428 05/05/2014 kernel: task: ffff88026939e800 task.stack: ffffc90007884000 kernel: RIP: 0010:target_put_nacl+0x49/0xb0 kernel: RSP: 0018:ffffc90007887d70 EFLAGS: 00010246 kernel: RAX: dead000000000200 RBX: ffff8802556ca000 RCX: 0000000000000000 kernel: RDX: dead000000000100 RSI: 0000000000000246 RDI: ffff8802556ce028 kernel: RBP: ffffc90007887d88 R08: 0000000000000001 R09: 0000000000000000 kernel: R10: ffffc90007887df8 R11: ffffea0009986900 R12: ffff8802556ce020 kernel: R13: ffff8802556ce028 R14: ffff8802556ce028 R15: ffffffff88d85540 kernel: FS: 0000000000000000(0000) GS:ffff88027fc00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 00007fffe36f5f94 CR3: 0000000009209000 CR4: 00000000003406f0 kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 kernel: Call Trace: kernel: transport_free_session+0x67/0x140 kernel: transport_deregister_session+0x7a/0xc0 kernel: iscsit_close_session+0x92/0x210 kernel: iscsit_close_connection+0x5f9/0x840 kernel: iscsit_take_action_for_connection_exit+0xfe/0x110 kernel: iscsi_target_tx_thread+0x140/0x1e0 kernel: ? wait_woken+0x90/0x90 kernel: kthread+0x124/0x160 kernel: ? iscsit_thread_get_cpumask+0x90/0x90 kernel: ? kthread_create_on_node+0x40/0x40 kernel: ret_from_fork+0x22/0x30 kernel: Code: 00 48 89 fb 4c 8b a7 48 01 00 00 74 68 4d 8d 6c 24 08 4c 89 ef e8 e8 28 43 00 48 8b 93 20 04 00 00 48 8b 83 28 04 00 00 4c 89 ef <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 20 kernel: RIP: target_put_nacl+0x49/0xb0 RSP: ffffc90007887d70 kernel: ---[ end trace f12821adbfd46fed ]--- To address this, go ahead and use proper list_del_list() for all cases of se_nacl->acl_list deletion. Reported-by: Justin Maggard Tested-by: Justin Maggard Cc: Justin Maggard Cc: stable@vger.kernel.org # 4.1+ Signed-off-by: Nicholas Bellinger

iscsi-target: Fix iscsi_np reset hung task during parallel delete

2017-08-06T21:41:41+00:00

This patch fixes a bug associated with iscsit_reset_np_thread() that can occur during parallel configfs rmdir of a single iscsi_np used across multiple iscsi-target instances, that would result in hung task(s) similar to below where configfs rmdir process context was blocked indefinately waiting for iscsi_np->np_restart_comp to finish: [ 6726.112076] INFO: task dcp_proxy_node_:15550 blocked for more than 120 seconds. [ 6726.119440] Tainted: G W O 4.1.26-3321 #2 [ 6726.125045] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 6726.132927] dcp_proxy_node_ D ffff8803f202bc88 0 15550 1 0x00000000 [ 6726.140058] ffff8803f202bc88 ffff88085c64d960 ffff88083b3b1ad0 ffff88087fffeb08 [ 6726.147593] ffff8803f202c000 7fffffffffffffff ffff88083f459c28 ffff88083b3b1ad0 [ 6726.155132] ffff88035373c100 ffff8803f202bca8 ffffffff8168ced2 ffff8803f202bcb8 [ 6726.162667] Call Trace: [ 6726.165150] [] schedule+0x32/0x80 [ 6726.170156] [] schedule_timeout+0x214/0x290 [ 6726.176030] [] ? __send_signal+0x52/0x4a0 [ 6726.181728] [] wait_for_completion+0x96/0x100 [ 6726.187774] [] ? wake_up_state+0x10/0x10 [ 6726.193395] [] iscsit_reset_np_thread+0x62/0xe0 [iscsi_target_mod] [ 6726.201278] [] iscsit_tpg_disable_portal_group+0x96/0x190 [iscsi_target_mod] [ 6726.210033] [] lio_target_tpg_store_enable+0x4f/0xc0 [iscsi_target_mod] [ 6726.218351] [] configfs_write_file+0xaa/0x110 [ 6726.224392] [] vfs_write+0xa4/0x1b0 [ 6726.229576] [] SyS_write+0x41/0xb0 [ 6726.234659] [] system_call_fastpath+0x12/0x71 It would happen because each iscsit_reset_np_thread() sets state to ISCSI_NP_THREAD_RESET, sends SIGINT, and then blocks waiting for completion on iscsi_np->np_restart_comp. However, if iscsi_np was active processing a login request and more than a single iscsit_reset_np_thread() caller to the same iscsi_np was blocked on iscsi_np->np_restart_comp, iscsi_np kthread process context in __iscsi_target_login_thread() would flush pending signals and only perform a single completion of np->np_restart_comp before going back to sleep within transport specific iscsit_transport->iscsi_accept_np code. To address this bug, add a iscsi_np->np_reset_count and update __iscsi_target_login_thread() to keep completing np->np_restart_comp until ->np_reset_count has reached zero. Reported-by: Gary Guo Tested-by: Gary Guo Cc: Mike Christie Cc: Hannes Reinecke Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger

cxgbit: fix sg_nents calculation

2017-07-30T22:35:34+00:00

The current logic of calculating sg_nents can fail if data_offset % PAGE_SIZE is not zero. For example - PAGE_SIZE = 4096 data_len = 3072 data_offset = 3072 As per current logic sg_nents = max(1UL, DIV_ROUND_UP(data_len, PAGE_SIZE)); sg_nents = max(1UL, DIV_ROUND_UP(3072, 4096)); sg_nents = 1 But as data_offset % PAGE_SIZE = 3072 we should skip 3072 bytes skip = 3K sg_nents = max(1UL, DIV_ROUND_UP(3K(skip) + 3K(data_len), 4K(PAGE_SIZE)); sg_nents = 2; This patch fixes this issue by adding skip to data_len. Signed-off-by: Varun Prakash Signed-off-by: Nicholas Bellinger

iscsi-target: fix invalid flags in text response

2017-07-30T22:32:48+00:00

In case of multiple text responses iscsi-target sets both 'F' and 'C' bit for the final text response pdu, this issue happens because hdr->flags is not zeroed out before ORing with 'F' bit. This patch removes the | operator to fix this issue. Signed-off-by: Varun Prakash Signed-off-by: Nicholas Bellinger

iscsi-target: fix memory leak in iscsit_setup_text_cmd()

2017-07-30T22:31:34+00:00

On receiving text request iscsi-target allocates buffer for payload in iscsit_handle_text_cmd() and assigns buffer pointer to cmd->text_in_ptr, this buffer is currently freed in iscsit_release_cmd(), if iscsi-target sets 'C' bit in text response then it will receive another text request from the initiator with ttt != 0xffffffff in this case iscsi-target will find cmd using itt and call iscsit_setup_text_cmd() which will set cmd->text_in_ptr to NULL without freeing previously allocated buffer. This patch fixes this issue by calling kfree(cmd->text_in_ptr) in iscsit_setup_text_cmd() before assigning NULL to it. For the first text request cmd->text_in_ptr is NULL as cmd is memset to 0 in iscsit_allocate_cmd(). Signed-off-by: Varun Prakash Cc: # 4.0+ Signed-off-by: Nicholas Bellinger

cxgbit: add missing __kfree_skb()

2017-07-30T22:26:00+00:00

Call __kfree_skb() after processing skb to avoid memory leak. Signed-off-by: Varun Prakash Signed-off-by: Nicholas Bellinger

tcmu: free old string on reconfig

2017-07-30T22:23:21+00:00

On initial tcmu_configure_device call the info->name would have already been allocated and set, so on the second call make sure to free it first. Reported-by: Mike Christie Reviewed-by: Mike Christie Signed-off-by: Bryant G. Ly Signed-off-by: Nicholas Bellinger

tcmu: Fix possible to/from address overflow when doing the memcpy

2017-07-30T22:12:32+00:00

For most case the sg->length equals to PAGE_SIZE, so this bug won't be triggered. Otherwise this will crash the kernel, for example when all segments' sg->length equal to 1K. Signed-off-by: Xiubo Li Reviewed-by: Mike Christie Signed-off-by: Nicholas Bellinger

Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random

2017-07-15T19:44:02+00:00

Pull random updates from Ted Ts'o: "Add wait_for_random_bytes() and get_random_*_wait() functions so that callers can more safely get random bytes if they can block until the CRNG is initialized. Also print a warning if get_random_*() is called before the CRNG is initialized. By default, only one single-line warning will be printed per boot. If CONFIG_WARN_ALL_UNSEEDED_RANDOM is defined, then a warning will be printed for each function which tries to get random bytes before the CRNG is initialized. This can get spammy for certain architecture types, so it is not enabled by default" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: reorder READ_ONCE() in get_random_uXX random: suppress spammy warnings about unseeded randomness random: warn when kernel uses unseeded randomness net/route: use get_random_int for random counter net/neighbor: use get_random_u32 for 32-bit hash random rhashtable: use get_random_u32 for hash_rnd ceph: ensure RNG is seeded before using iscsi: ensure RNG is seeded before use cifs: use get_random_u32 for 32-bit lock random random: add get_random_{bytes,u32,u64,int,long,once}_wait family random: add wait_for_random_bytes() API

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2017-07-13T21:27:32+00:00

Pull SCSI target updates from Nicholas Bellinger: "It's been usually busy for summer, with most of the efforts centered around TCMU developments and various target-core + fabric driver bug fixing activities. Not particularly large in terms of LoC, but lots of smaller patches from many different folks. The highlights include: - ibmvscsis logical partition manager support (Michael Cyr + Bryant Ly) - Convert target/iblock WRITE_SAME to blkdev_issue_zeroout (hch + nab) - Add support for TMR percpu LUN reference counting (nab) - Fix a potential deadlock between EXTENDED_COPY and iscsi shutdown (Bart) - Fix COMPARE_AND_WRITE caw_sem leak during se_cmd quiesce (Jiang Yi) - Fix TMCU module removal (Xiubo Li) - Fix iser-target OOPs during login failure (Andrea Righi + Sagi) - Breakup target-core free_device backend driver callback (mnc) - Perform TCMU add/delete/reconfig synchronously (mnc) - Fix TCMU multiple UIO open/close sequences (mnc) - Fix TCMU CHECK_CONDITION sense handling (mnc) - Fix target-core SAM_STAT_BUSY + TASK_SET_FULL handling (mnc + nab) - Introduce TYPE_ZBC support in PSCSI (Damien Le Moal) - Fix possible TCMU memory leak + OOPs when recalculating cmd base size (Xiubo Li + Bryant Ly + Damien Le Moal + mnc) - Add login_keys_workaround attribute for non RFC initiators (Robert LeBlanc + Arun Easi + nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (68 commits) iscsi-target: Add login_keys_workaround attribute for non RFC initiators Revert "qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT" tcmu: clean up the code and with one small fix tcmu: Fix possbile memory leak / OOPs when recalculating cmd base size target: export lio pgr/alua support as device attr target: Fix return sense reason in target_scsi3_emulate_pr_out target: Fix cmd size for PR-OUT in passthrough_parse_cdb tcmu: Fix dev_config_store target: pscsi: Introduce TYPE_ZBC support target: Use macro for WRITE_VERIFY_32 operation codes target: fix SAM_STAT_BUSY/TASK_SET_FULL handling target: remove transport_complete pscsi: finish cmd processing from pscsi_req_done tcmu: fix sense handling during completion target: add helper to copy sense to se_cmd buffer target: do not require a transport_complete for SCF_TRANSPORT_TASK_SENSE target: make device_mutex and device_list static tcmu: Fix flushing cmd entry dcache page tcmu: fix multiple uio open/close sequences tcmu: drop configured check in destroy ...