talos-obmc-linux/drivers/rtc, branch dev-4.10

Merge tag 'v4.10.17' into dev-4.10

2017-06-05T02:24:15+00:00

This is the 4.10.17 stable release

rtc: tegra: Implement clock handling

2017-04-21T07:32:42+00:00

commit 5fa4086987506b2ab8c92f8f99f2295db9918856 upstream. Accessing the registers of the RTC block on Tegra requires the module clock to be enabled. This only works because the RTC module clock will be enabled by default during early boot. However, because the clock is unused, the CCF will disable it at late_init time. This causes the RTC to become unusable afterwards. This can easily be reproduced by trying to use the RTC: $ hwclock --rtc /dev/rtc1 This will hang the system. I ran into this by following up on a report by Martin Michlmayr that reboot wasn't working on Tegra210 systems. It turns out that the rtc-tegra driver's ->shutdown() implementation will hang the CPU, because of the disabled clock, before the system can be rebooted. What confused me for a while is that the same driver is used on prior Tegra generations where the hang can not be observed. However, as Peter De Schrijver pointed out, this is because on 32-bit Tegra chips the RTC clock is enabled by the tegra20_timer.c clocksource driver, which uses the RTC to provide a persistent clock. This code is never enabled on 64-bit Tegra because the persistent clock infrastructure does not exist on 64-bit ARM. The proper fix for this is to add proper clock handling to the RTC driver in order to ensure that the clock is enabled when the driver requires it. All device trees contain the clock already, therefore no additional changes are required. Reported-by: Martin Michlmayr Acked-By Peter De Schrijver Signed-off-by: Thierry Reding Signed-off-by: Alexandre Belloni [bwh: Backported to 4.9: adjust context] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

rtc: Add Aspeed AST2400 rtc driver

2017-03-22T14:57:51+00:00

Read and writes the time to the non-battery backed RTC in the Aspeed AST2400 system on chip. TODO: support timer functionality. OpenBMC-Staging-Count: 1 Signed-off-by: Joel Stanley

rtc: sun6i: Switch to the external oscillator

2017-03-12T05:44:19+00:00

commit fb61bb82cb46a932ef2fc62e1c731c8e7e6640d5 upstream. The RTC is clocked from either an internal, imprecise, oscillator or an external one, which is usually much more accurate. The difference perceived between the time elapsed and the time reported by the RTC is in a 10% scale, which prevents the RTC from being useful at all. Fortunately, the external oscillator is reported to be mandatory in the Allwinner datasheet, so we can just switch to it. Fixes: 9765d2d94309 ("rtc: sun6i: Add sun6i RTC driver") Signed-off-by: Maxime Ripard Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: sun6i: Add some locking

2017-03-12T05:44:19+00:00

commit a9422a19ce270a22fc520f2278fb7e80c58be508 upstream. Some registers have a read-modify-write access pattern that are not atomic. Add some locking to prevent from concurrent accesses. Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: sun6i: Disable the build as a module

2017-03-12T05:44:19+00:00

commit 3753941475ae6501dcd1e41832bd0e6c35247d6a upstream. Since we have to provide the clock very early on, the RTC driver cannot be built as a module. Make sure that won't happen. Signed-off-by: Maxime Ripard Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: jz4740: make the driver buildable as a module again

2017-01-26T22:03:21+00:00

By using kernel_halt() instead of machine_halt(), we can make the driver build as a module. However, jz4740 platforms not loading this module will not be able to power off. Suggested-by: Geert Uytterhoeven Signed-off-by: Alexandre Belloni Revert "rtc: jz4740: make the driver builtin only" This reverts commit b9168c539c0b2de756aaffd380384dbde8adbe07.

ktime: Cleanup ktime_set() usage

2016-12-25T16:21:22+00:00

ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra

ktime: Get rid of the union

2016-12-25T16:21:22+00:00

ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra

Merge tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2016-12-19T02:18:03+00:00

Pull RTC updates from Alexandre Belloni: "Subsystem: - non-modular drivers are now explicitly non-modular New driver: - Epson Toyocom rtc-7301sf/dg Drivers: - cmos: reject unsupported alarm values wrt the RTC capabilities - ds1307: ACPI support - jz4740: DT support, jz4780 handling, can now be used as a system power controller - mcp795: many fixes, in particular proper month handling - twl: driver is now DT only" * tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits) rtc: mcp795: Fix whitespace and indentation. rtc: mcp795: Prefer using the BIT() macro. rtc: mcp795: fix month write resetting date to 1. rtc: mcp795: fix time range difference between linux and RTC chip. rtc: mcp795: fix bitmask value for leap year (LP). rtc: mcp795: use bcd2bin/bin2bcd. rtc: add support for EPSON TOYOCOM RTC-7301SF/DG rtc: ds1307: Add ACPI support rtc: imxdi: (trivial) fix a typo rtc: ds1374: Merge conditional + WARN_ON() rtc: twl: make driver DT only rtc: twl: kill static variables rtc: fix typos in Kconfig rtc: jz4740: make the driver builtin only rtc: jz4740: remove unused EXPORT_SYMBOL Documentation: bindings: fix twl-rtc documentation rtc: Enable compile testing for Maxim and Samsung drivers MIPS: jz4740: Remove obsolete code MIPS: qi_lb60: Probe RTC driver from DT and use it as power controller MIPS: jz4740: DTS: Probe the jz4740-rtc driver from devicetree ...