talos-obmc-linux/drivers/misc, branch dev-4.13

misc: aspeed-lpc-ctrl: Enable FWH and A2H bridge cycles

2018-02-13T06:03:31+00:00

To date this driver has relied on prevous state from out of tree hacks and vendor u-boot trees in order to have the host be able to access data over the LPC bus. Now we explicitly enable the AHB to LPC bridge and FWH cycles from when the user first configures the address to map. We chose to do this then as before that time there is no way for the kernel to know where it is safe to point the LPC window. OpenBMC-Staging-Count: 1 Tested-by: Lei YU Reviewed-by: Andrew Jeffery Signed-off-by: Joel Stanley

misc: aspeed-lpc: Request and enable LPC clock

2018-02-13T06:03:28+00:00

The LPC device needs to ensure it's clock is enabled before it can do anything. In the past the clock was enabled and left running by u-boot, however Linux now has an upstream clock driver that disables unused clocks. OpenBMC-Staging-Count: 1 Tested-by: Lei YU Reviewed-by: Andrew Jeffery Signed-off-by: Joel Stanley

misc: Add ASPEED mbox driver

2018-01-29T11:46:19+00:00

This provides access to the mbox registers on the ast2400 and ast2500 SoCs. This driver allows arbitrary reads and writes to the 16 data registers as the other end may have configured the mbox hardware to provide an interrupt when a specific register gets written to. OpenBMC-Staging-Count: 2 [joel: move to drivers/misc as this isn't a mailbox driver] Signed-off-by: Cyril Bur Signed-off-by: Joel Stanley

mei: always use domain runtime pm callbacks.

2017-10-18T07:38:27+00:00

commit b42dc0635bf0a6aa59fe4d7c826796ff659908c7 upstream. This patch fixes a regression caused by the new changes in the "run wake" handlers. The mei devices that support D0i3 are no longer receiving an interrupt after entering runtime suspend state and will stall. pci_dev_run_wake function now returns "true" for some devices (including mei) for which it used to return "false", arguably incorrectly as "run wake" used to mean that wakeup signals can be generated for a device in the working state of the system, so it could not be enabled or disabled before too. MEI maps runtime suspend/resume to its own defined power gating (PG) states, (D0i3 or other depending on generation), hence we need to go around the native PCI runtime service which eventually brings the device into D3cold/hot state, but the mei devices cannot wake up from D3 unlike from D0i3/PG state, which keeps irq running. To get around PCI device native runtime pm, MEI uses runtime pm domain handlers which take precedence. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Acked-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

cxl: Fix driver use count

2017-09-27T12:43:15+00:00

commit 197267d0356004a31c4d6b6336598f5dff3301e1 upstream. cxl keeps a driver use count, which is used with the hash memory model on p8 to know when to upgrade local TLBIs to global and to trigger callbacks to manage the MMU for PSL8. If a process opens a context and closes without attaching or fails the attachment, the driver use count is never decremented. As a consequence, TLB invalidations remain global, even if there are no active cxl contexts. We should increment the driver use count when the process is attaching to the cxl adapter, and not on open. It's not needed before the adapter starts using the context and the use count is decremented on the detach path, so it makes more sense. It affects only the user api. The kernel api is already doing The Right Thing. Signed-off-by: Frederic Barrat Fixes: 7bb5d91a4dda ("cxl: Rework context lifetimes") Acked-by: Andrew Donnellan Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

sgi-gru: update to new mmu_notifier semantic

2017-08-31T23:13:00+00:00

Calls to mmu_notifier_invalidate_page() were replaced by calls to mmu_notifier_invalidate_range() and are now bracketed by calls to mmu_notifier_invalidate_range_start()/end() Remove now useless invalidate_page callback. Signed-off-by: Jérôme Glisse Cc: Dimitri Sivanich Cc: Jack Steiner Cc: Kirill A. Shutemov Cc: Andrew Morton Cc: Andrea Arcangeli Signed-off-by: Linus Torvalds

misc/mic/scif: update to new mmu_notifier semantic

2017-08-31T23:13:00+00:00

Calls to mmu_notifier_invalidate_page() were replaced by calls to mmu_notifier_invalidate_range() and are now bracketed by calls to mmu_notifier_invalidate_range_start()/end() Remove now useless invalidate_page callback. Signed-off-by: Jérôme Glisse Cc: Sudeep Dutt Cc: Ashutosh Dixit Cc: Kirill A. Shutemov Cc: Andrew Morton Cc: Andrea Arcangeli Signed-off-by: Linus Torvalds

mei: exclude device from suspend direct complete optimization

2017-08-10T21:13:18+00:00

MEI device performs link reset during system suspend sequence. The link reset cannot be performed while device is in runtime suspend state. The resume sequence is bypassed with suspend direct complete optimization,so the optimization should be disabled for mei devices. Fixes: [ 192.940537] Restarting tasks ... [ 192.940610] PGI is not set [ 192.940619] ------------[ cut here ]------------ [ 192.940623] WARNING: CPU: 0 me.c:653 mei_me_pg_exit_sync+0x351/0x360 [ 192.940624] Modules linked in: [ 192.940627] CPU: 0 PID: 1661 Comm: kworker/0:3 Not tainted 4.13.0-rc2+ #2 [ 192.940628] Hardware name: Dell Inc. XPS 13 9343/0TM99H, BIOS A11 12/08/2016 [ 192.940630] Workqueue: pm pm_runtime_work [ 192.940642] Call Trace: [ 192.940646] ? pci_pme_active+0x1de/0x1f0 [ 192.940649] ? pci_restore_standard_config+0x50/0x50 [ 192.940651] ? kfree+0x172/0x190 [ 192.940653] ? kfree+0x172/0x190 [ 192.940655] ? pci_restore_standard_config+0x50/0x50 [ 192.940663] mei_me_pm_runtime_resume+0x3f/0xc0 [ 192.940665] pci_pm_runtime_resume+0x7a/0xa0 [ 192.940667] __rpm_callback+0xb9/0x1e0 [ 192.940668] ? preempt_count_add+0x6d/0xc0 [ 192.940670] rpm_callback+0x24/0x90 [ 192.940672] ? pci_restore_standard_config+0x50/0x50 [ 192.940674] rpm_resume+0x4e8/0x800 [ 192.940676] pm_runtime_work+0x55/0xb0 [ 192.940678] process_one_work+0x184/0x3e0 [ 192.940680] worker_thread+0x4d/0x3a0 [ 192.940681] ? preempt_count_sub+0x9b/0x100 [ 192.940683] kthread+0x122/0x140 [ 192.940684] ? process_one_work+0x3e0/0x3e0 [ 192.940685] ? __kthread_create_on_node+0x1a0/0x1a0 [ 192.940688] ret_from_fork+0x27/0x40 [ 192.940690] Code: 96 3a 9e ff 48 8b 7d 98 e8 cd 21 58 00 83 bb bc 01 00 00 04 0f 85 40 fe ff ff e9 41 fe ff ff 48 c7 c7 5f 04 99 96 e8 93 6b 9f ff <0f> ff e9 5d fd ff ff e8 33 fe 99 ff 0f 1f 00 0f 1f 44 00 00 55 [ 192.940719] ---[ end trace a86955597774ead8 ]--- [ 192.942540] done. Suggested-by: Rafael J. Wysocki Reported-by: Dominik Brodowski Cc: Rafael J. Wysocki Cc: Dominik Brodowski Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman

Merge tag 'powerpc-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2017-07-07T20:55:45+00:00

Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for STRICT_KERNEL_RWX on 64-bit server CPUs. - Platform support for FSP2 (476fpe) board - Enable ZONE_DEVICE on 64-bit server CPUs. - Generic & powerpc spin loop primitives to optimise busy waiting - Convert VDSO update function to use new update_vsyscall() interface - Optimisations to hypercall/syscall/context-switch paths - Improvements to the CPU idle code on Power8 and Power9. As well as many other fixes and improvements. Thanks to: Akshay Adiga, Andrew Donnellan, Andrew Jeffery, Anshuman Khandual, Anton Blanchard, Balbir Singh, Benjamin Herrenschmidt, Christophe Leroy, Christophe Lombard, Colin Ian King, Dan Carpenter, Gautham R. Shenoy, Hari Bathini, Ian Munsie, Ivan Mikhaylov, Javier Martinez Canillas, Madhavan Srinivasan, Masahiro Yamada, Matt Brown, Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pavel Machek, Russell Currey, Santosh Sivaraj, Stephen Rothwell, Thiago Jung Bauermann, Yang Li" * tag 'powerpc-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits) powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs powerpc/mm/radix: Implement STRICT_RWX/mark_rodata_ro() for Radix powerpc/mm/hash: Implement mark_rodata_ro() for hash powerpc/vmlinux.lds: Align __init_begin to 16M powerpc/lib/code-patching: Use alternate map for patch_instruction() powerpc/xmon: Add patch_instruction() support for xmon powerpc/kprobes/optprobes: Use patch_instruction() powerpc/kprobes: Move kprobes over to patch_instruction() powerpc/mm/radix: Fix execute permissions for interrupt_vectors powerpc/pseries: Fix passing of pp0 in updatepp() and updateboltedpp() powerpc/64s: Blacklist rtas entry/exit from kprobes powerpc/64s: Blacklist functions invoked on a trap powerpc/64s: Un-blacklist system_call() from kprobes powerpc/64s: Move system_call() symbol to just after setting MSR_EE powerpc/64s: Blacklist system_call() and system_call_common() from kprobes powerpc/64s: Convert .L__replay_interrupt_return to a local label powerpc64/elfv1: Only dereference function descriptor for non-text symbols cxl: Export library to support IBM XSL powerpc/dts: Use #include "..." to include local DT powerpc/perf/hv-24x7: Aggregate result elements on POWER9 SMT8 ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2017-07-06T19:10:33+00:00

Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, bnx2fc, qedf, hpsa, hisi_sas, smartpqi, cxlflash, aacraid, csiostor along with a host of minor and miscellaneous changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (276 commits) qla2xxx: Fix NVMe entry_type for iocb packet on BE system scsi: qla2xxx: avoid unused-function warning scsi: snic: fix a couple of spelling mistakes/typos scsi: qla2xxx: fix a bunch of typos and spelling mistakes scsi: lpfc: don't double count abort errors scsi: lpfc: spin_lock_irq() is not nestable scsi: hisi_sas: optimise DMA slot memory scsi: ibmvfc: constify dev_pm_ops structures. scsi: ibmvscsi: constify dev_pm_ops structures. scsi: cxlflash: Update debug prints in reset handlers scsi: cxlflash: Update send_tmf() parameters scsi: cxlflash: Avoid double free of character device scsi: Add STARGET_CREATED_REMOVE state to scsi_target_state scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails. scsi: ufs: flush eh_work when eh_work scheduled. scsi: qla2xxx: Protect access to qpair members with qpair->qp_lock scsi: sun_esp: fix device reference leaks scsi: fnic: changing queue command to return result DID_IMM_RETRY when rport is init scsi: fnic: correct speed display and add support for 25,40 and 100G scsi: fnic: added timestamp reporting in fnic debug stats ...