talos-obmc-linux/drivers/block, branch dev-5.0

loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()

2019-04-05T20:34:31+00:00

[ Upstream commit 758a58d0bc67457f1215321a536226654a830eeb ] Commit 0da03cab87e6 ("loop: Fix deadlock when calling blkdev_reread_part()") moves blkdev_reread_part() out of the loop_ctl_mutex. However, GENHD_FL_NO_PART_SCAN is set before __blkdev_reread_part(). As a result, __blkdev_reread_part() will fail the check of GENHD_FL_NO_PART_SCAN and will not rescan the loop device to delete all partitions. Below are steps to reproduce the issue: step1 # dd if=/dev/zero of=tmp.raw bs=1M count=100 step2 # losetup -P /dev/loop0 tmp.raw step3 # parted /dev/loop0 mklabel gpt step4 # parted -a none -s /dev/loop0 mkpart primary 64s 1 step5 # losetup -d /dev/loop0 Step5 will not be able to delete /dev/loop0p1 (introduced by step4) and there is below kernel warning message: [ 464.414043] __loop_clr_fd: partition scan of loop0 failed (rc=-22) This patch sets GENHD_FL_NO_PART_SCAN after blkdev_reread_part(). Fixes: 0da03cab87e6 ("loop: Fix deadlock when calling blkdev_reread_part()") Signed-off-by: Dongli Zhang Reviewed-by: Jan Kara Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

drivers/block/zram/zram_drv.c: fix idle/writeback string compare

2019-04-03T04:27:34+00:00

commit 0bc9f5d14a93971c6cd9c0d81b0fc154fc54c65d upstream. Makoto report a below KASAN error: zram does out-of-bounds read. Because strscpy copies from source up to count bytes unconditionally. It could cause out-of-bounds read on next object in slab. To prevent it, use strlcpy which checks source's length automatically. BUG: KASAN: slab-out-of-bounds in strscpy+0x68/0x154 Read of size 8 at addr ffffffc0c3495a00 by task system_server/1314 .. Call trace: strscpy+0x68/0x154 idle_store+0xc4/0x34c dev_attr_store+0x50/0x6c sysfs_kf_write+0x98/0xb4 kernfs_fop_write+0x198/0x260 __vfs_write+0x10c/0x338 vfs_write+0x114/0x238 SyS_write+0xc8/0x168 __sys_trace_return+0x0/0x4 Allocated by task 1314: __kmalloc+0x280/0x318 kernfs_fop_write+0xac/0x260 __vfs_write+0x10c/0x338 vfs_write+0x114/0x238 SyS_write+0xc8/0x168 __sys_trace_return+0x0/0x4 Freed by task 2855: kfree+0x138/0x630 kernfs_put_open_node+0x10c/0x124 kernfs_fop_release+0xd8/0x114 __fput+0x130/0x2a4 ____fput+0x1c/0x28 task_work_run+0x16c/0x1c8 do_notify_resume+0x2bc/0x107c work_pending+0x8/0x10 The buggy address belongs to the object at ffffffc0c3495a00 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 0 bytes inside of 128-byte region [ffffffc0c3495a00, ffffffc0c3495a80) The buggy address belongs to the page: page:ffffffbf030d2500 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x4000000000010200(slab|head) page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffc0c3495900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc0c3495980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffffffc0c3495a00: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffffffc0c3495a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffffc0c3495b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Link: http://lkml.kernel.org/r/20190319231911.145968-1-minchan@kernel.org Cc: [5.0] Signed-off-by: Minchan Kim Reported-by: Makoto Wu Reviewed-by: Sergey Senozhatsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

loop: access lo_backing_file only when the loop device is Lo_bound

2019-03-27T05:17:59+00:00

commit f7c8a4120eedf24c36090b7542b179ff7a649219 upstream. Commit 758a58d0bc67 ("loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()") separates "lo->lo_backing_file = NULL" and "lo->lo_state = Lo_unbound" into different critical regions protected by loop_ctl_mutex. However, there is below race that the NULL lo->lo_backing_file would be accessed when the backend of a loop is another loop device, e.g., loop0's backend is a file, while loop1's backend is loop0. loop0's backend is file loop1's backend is loop0 __loop_clr_fd() mutex_lock(&loop_ctl_mutex); lo->lo_backing_file = NULL; --> set to NULL mutex_unlock(&loop_ctl_mutex); loop_set_fd() mutex_lock_killable(&loop_ctl_mutex); loop_validate_file() f = l->lo_backing_file; --> NULL access if loop0 is not Lo_unbound mutex_lock(&loop_ctl_mutex); lo->lo_state = Lo_unbound; mutex_unlock(&loop_ctl_mutex); lo->lo_backing_file should be accessed only when the loop device is Lo_bound. In fact, the problem has been introduced already in commit 7ccd0791d985 ("loop: Push loop_ctl_mutex down into loop_clr_fd()") after which loop_validate_file() could see devices in Lo_rundown state with which it did not count. It was harmless at that point but still. Fixes: 7ccd0791d985 ("loop: Push loop_ctl_mutex down into loop_clr_fd()") Reported-by: syzbot+9bdc1adc1c55e7fe765b@syzkaller.appspotmail.com Signed-off-by: Dongli Zhang Reviewed-by: Jan Kara Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

floppy: check_events callback should not return a negative number

2019-02-12T16:13:18+00:00

floppy_check_events() is supposed to return bit flags to say which events occured. We should return zero to say that no event flags are set. Only BIT(0) and BIT(1) are used in the caller. And .check_events interface also expect to return an unsigned int value. However, after commit a0c80efe5956, it may return -EINTR (-4u). Here, both BIT(0) and BIT(1) are cleared. So this patch shouldn't affect runtime, but it obviously is still worth fixing. Reviewed-by: Dan Carpenter Fixes: a0c80efe5956 ("floppy: fix lock_fdc() signal handling") Signed-off-by: Yufen Yu Signed-off-by: Jens Axboe

Merge tag 'for-linus-20190118' of git://git.kernel.dk/linux-block

2019-01-19T21:12:50+00:00

Pull block fixes from Jens Axboe: - block size setting fixes for loop/nbd (Jan Kara) - md bio_alloc_mddev() cleanup (Marcos) - Ensure we don't lose the REQ_INTEGRITY flag (Ming) - Two NVMe fixes by way of Christoph: - Fix NVMe IRQ calculation (Ming) - Uninitialized variable in nvmet-tcp (Sagi) - BFQ comment fix (Paolo) - License cleanup for recently added blk-mq-debugfs-zoned (Thomas) * tag 'for-linus-20190118' of git://git.kernel.dk/linux-block: block: Cleanup license notice nvme-pci: fix nvme_setup_irqs() nvmet-tcp: fix uninitialized variable access block: don't lose track of REQ_INTEGRITY flag blockdev: Fix livelocks on loop device nbd: Use set_blocksize() to set device blocksize md: Make bio_alloc_mddev use bio_alloc_bioset block, bfq: fix comments on __bfq_deactivate_entity

nbd: Use set_blocksize() to set device blocksize

2019-01-15T14:30:54+00:00

NBD can update block device block size implicitely through bd_set_size(). Make it explicitely set blocksize with set_blocksize() as this behavior of bd_set_size() is going away. CC: Josef Bacik Signed-off-by: Jan Kara Signed-off-by: Jens Axboe

Merge tag 'for-linus-20190112' of git://git.kernel.dk/linux-block

2019-01-12T21:40:51+00:00

Pull block fixes from Jens Axboe: - NVMe pull request from Christoph, with little fixes all over the map - Loop caching fix for offset/bs change (Jaegeuk Kim) - Block documentation tweaks (Jeff, Jon, Weiping, John) - null_blk zoned tweak (John) - ahch mvebu suspend/resume support. Should have gone into the merge window, but there was some confusion on which tree had it. (Miquel) * tag 'for-linus-20190112' of git://git.kernel.dk/linux-block: (22 commits) ata: ahci: mvebu: request PHY suspend/resume for Armada 3700 ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs ata: ahci: mvebu: remove stale comment ata: libahci_platform: comply to PHY framework loop: drop caches if offset or block_size are changed block: fix kerneldoc comment for blk_attempt_plug_merge() nvme: don't initlialize ctrl->cntlid twice nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN nvme: pad fake subsys NQN vid and ssvid with zeros nvme-multipath: zero out ANA log buffer nvme-fabrics: unset write/poll queues for discovery controllers nvme-tcp: don't ask if controller is fabrics nvme-tcp: remove dead code nvme-pci: fix out of bounds access in nvme_cqe_pending nvme-pci: rerun irq setup on IO queue init errors nvme-pci: use the same attributes when freeing host_mem_desc_bufs. nvme-pci: fix the wrong setting of nr_maps block: doc: add slice_idle_us to bfq documentation block: clarify documentation for blk_{start|finish}_plug ...

Merge tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping

2019-01-12T18:52:40+00:00

Pull dma_zalloc_coherent() removal from Christoph Hellwig: "We've always had a weird situation around dma_zalloc_coherent. To safely support mapping the allocations to userspace major architectures like x86 and arm have always zeroed allocations from dma_alloc_coherent, but a couple other architectures were missing that zeroing either always or in corner cases. Then later we grew anothe dma_zalloc_coherent interface to explicitly request zeroing, but that just added __GFP_ZERO to the allocation flags, which for some allocators that didn't end up using the page allocator ended up being a no-op and still not zeroing the allocations. So for this merge window I fixed up all remaining architectures to zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a no-op wrapper around dma_alloc_coherent, which fixes all of the above issues. dma_zalloc_coherent is now pointless and can go away, and Luis helped me writing a cocchinelle script and patch series to kill it, which I think we should apply now just after -rc1 to finally settle these issue" * tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: remove dma_zalloc_coherent() cross-tree: phase out dma_zalloc_coherent() on headers cross-tree: phase out dma_zalloc_coherent()

Merge tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client

2019-01-11T20:17:30+00:00

Pull ceph updates from Ilya Dryomov: "A patch to allow setting abort_on_full and a fix for an old "rbd unmap" edge case, marked for stable" * tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client: rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set ceph: use vmf_error() in ceph_filemap_fault() libceph: allow setting abort_on_full for rbd

rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set

2019-01-10T08:45:09+00:00

There is a window between when RBD_DEV_FLAG_REMOVING is set and when the device is removed from rbd_dev_list. During this window, we set "already" and return 0. Returning 0 from write(2) can confuse userspace tools because 0 indicates that nothing was written. In particular, "rbd unmap" will retry the write multiple times a second: 10:28:05.463299 write(4, "0", 1) = 0 10:28:05.463509 write(4, "0", 1) = 0 10:28:05.463720 write(4, "0", 1) = 0 10:28:05.463942 write(4, "0", 1) = 0 10:28:05.464155 write(4, "0", 1) = 0 Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov Tested-by: Dongsheng Yang