talos-obmc-linux/arch/mips, branch v4.19.20

MIPS: SiByte: Enable swiotlb for SWARM, LittleSur and BigSur

2019-01-26T08:32:35+00:00

[ Upstream commit e4849aff1e169b86c561738daf8ff020e9de1011 ] The Broadcom SiByte BCM1250, BCM1125, and BCM1125H SOCs have an onchip DRAM controller that supports memory amounts of up to 16GiB, and due to how the address decoder has been wired in the SOC any memory beyond 1GiB is actually mapped starting from 4GiB physical up, that is beyond the 32-bit addressable limit[1]. Consequently if the maximum amount of memory has been installed, then it will span up to 19GiB. Many of the evaluation boards we support that are based on one of these SOCs have their memory soldered and the amount present fits in the 32-bit address range. The BCM91250A SWARM board however has actual DIMM slots and accepts, depending on the peripherals revision of the SOC, up to 4GiB or 8GiB of memory in commercially available JEDEC modules[2]. I believe this is also the case with the BCM91250C2 LittleSur board. This means that up to either 3GiB or 7GiB of memory requires 64-bit addressing to access. I believe the BCM91480B BigSur board, which has the BCM1480 SOC instead, accepts at least as much memory, although I have no documentation or actual hardware available to verify that. Both systems have PCI slots installed for use by any PCI option boards, including ones that only support 32-bit addressing (additionally the 32-bit PCI host bridge of the BCM1250, BCM1125, and BCM1125H SOCs limits addressing to 32-bits), and there is no IOMMU available. Therefore for PCI DMA to work in the presence of memory beyond enable swiotlb for the affected systems. All the other SOC onchip DMA devices use 40-bit addressing and therefore can address the whole memory, so only enable swiotlb if PCI support and support for DMA beyond 4GiB have been both enabled in the configuration of the kernel. This shows up as follows: Broadcom SiByte BCM1250 B2 @ 800 MHz (SB1 rev 2) Board type: SiByte BCM91250A (SWARM) Determined physical RAM map: memory: 000000000fe7fe00 @ 0000000000000000 (usable) memory: 000000001ffffe00 @ 0000000080000000 (usable) memory: 000000000ffffe00 @ 00000000c0000000 (usable) memory: 0000000087fffe00 @ 0000000100000000 (usable) software IO TLB: mapped [mem 0xcbffc000-0xcfffc000] (64MB) in the bootstrap log and removes failures like these: defxx 0000:02:00.0: dma_direct_map_page: overflow 0x0000000185bc6080+4608 of device mask ffffffff bus mask 0 fddi0: Receive buffer allocation failed fddi0: Adapter open failed! IP-Config: Failed to open fddi0 defxx 0000:09:08.0: dma_direct_map_page: overflow 0x0000000185bc6080+4608 of device mask ffffffff bus mask 0 fddi1: Receive buffer allocation failed fddi1: Adapter open failed! IP-Config: Failed to open fddi1 when memory beyond 4GiB is handed out to devices that can only do 32-bit addressing. This updates commit cce335ae47e2 ("[MIPS] 64-bit Sibyte kernels need DMA32."). References: [1] "BCM1250/BCM1125/BCM1125H User Manual", Revision 1250_1125-UM100-R, Broadcom Corporation, 21 Oct 2002, Section 3: "System Overview", "Memory Map", pp. 34-38 [2] "BCM91250A User Manual", Revision 91250A-UM100-R, Broadcom Corporation, 18 May 2004, Section 3: "Physical Description", "Supported DRAM", p. 23 Signed-off-by: Maciej W. Rozycki [paul.burton@mips.com: Remove GPL text from dma.c; SPDX tag covers it] Signed-off-by: Paul Burton Reviewed-by: Christoph Hellwig Patchwork: https://patchwork.linux-mips.org/patch/21108/ References: cce335ae47e2 ("[MIPS] 64-bit Sibyte kernels need DMA32.") Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin

Disable MSI also when pcie-octeon.pcie_disable on

2019-01-22T20:40:34+00:00

commit a214720cbf50cd8c3f76bbb9c3f5c283910e9d33 upstream. Octeon has an boot-time option to disable pcie. Since MSI depends on PCI-E, we should also disable MSI also with this option is on in order to avoid inadvertently accessing PCIe registers. Signed-off-by: YunQiang Su Signed-off-by: Paul Burton Cc: pburton@wavecomp.com Cc: linux-mips@vger.kernel.org Cc: aaro.koskinen@iki.fi Cc: stable@vger.kernel.org # v3.3+ Signed-off-by: Greg Kroah-Hartman

MIPS: lantiq: Fix IPI interrupt handling

2019-01-22T20:40:33+00:00

commit 2b4dba55b04b212a7fd1f0395b41d79ee3a9801b upstream. This makes SMP on the vrx200 work again, by removing all the MIPS CPU interrupt specific code and making it fully use the generic MIPS CPU interrupt controller. The mti,cpu-interrupt-controller from irq-mips-cpu.c now handles the CPU interrupts and also the IPI interrupts which are used to communication between the CPUs in a SMP system. The generic interrupt code was already used before but the interrupt vectors were overwritten again when we called set_vi_handler() in the lantiq interrupt driver and we also provided our own plat_irq_dispatch() function which overwrote the weak generic implementation. Now the code uses the generic handler for the MIPS CPU interrupts including the IPI interrupts and registers a handler for the CPU interrupts which are handled by the lantiq ICU with irq_set_chained_handler() which was already called before. Calling the set_c0_status() function is also not needed any more because the generic MIPS CPU interrupt already activates the needed bits. Fixes: 1eed40043579 ("MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain support") Cc: stable@kernel.org # v4.12 Signed-off-by: Hauke Mehrtens Signed-off-by: Paul Burton Cc: jhogan@kernel.org Cc: ralf@linux-mips.org Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Cc: linux-mips@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

MIPS: BCM47XX: Setup struct device for the SoC

2019-01-22T20:40:33+00:00

commit 321c46b91550adc03054125fa7a1639390608e1a upstream. So far we never had any device registered for the SoC. This resulted in some small issues that we kept ignoring like: 1) Not working GPIOLIB_IRQCHIP (gpiochip_irqchip_add_key() failing) 2) Lack of proper tree in the /sys/devices/ 3) mips_dma_alloc_coherent() silently handling empty coherent_dma_mask Kernel 4.19 came with a lot of DMA changes and caused a regression on bcm47xx. Starting with the commit f8c55dc6e828 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms") DMA coherent allocations just fail. Example: [ 1.114914] bgmac_bcma bcma0:2: Allocation of TX ring 0x200 failed [ 1.121215] bgmac_bcma bcma0:2: Unable to alloc memory for DMA [ 1.127626] bgmac_bcma: probe of bcma0:2 failed with error -12 [ 1.133838] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded The bgmac driver also triggers a WARNING: [ 0.959486] ------------[ cut here ]------------ [ 0.964387] WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 bgmac_enet_probe+0x1b4/0x5c4 [ 0.973751] Modules linked in: [ 0.976913] CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.9 #0 [ 0.982750] Stack : 804a0000 804597c4 00000000 00000000 80458fd8 8381bc2c 838282d4 80481a47 [ 0.991367] 8042e3ec 00000001 804d38f0 00000204 83980000 00000065 8381bbe0 6f55b24f [ 0.999975] 00000000 00000000 80520000 00002018 00000000 00000075 00000007 00000000 [ 1.008583] 00000000 80480000 000ee811 00000000 00000000 00000000 80432c00 80248db8 [ 1.017196] 00000009 00000204 83980000 803ad7b0 00000000 801feeec 00000000 804d0000 [ 1.025804] ... [ 1.028325] Call Trace: [ 1.030875] [<8000aef8>] show_stack+0x58/0x100 [ 1.035513] [<8001f8b4>] __warn+0xe4/0x118 [ 1.039708] [<8001f9a4>] warn_slowpath_null+0x48/0x64 [ 1.044935] [<80248db8>] bgmac_enet_probe+0x1b4/0x5c4 [ 1.050101] [<802498e0>] bgmac_probe+0x558/0x590 [ 1.054906] [<80252fd0>] bcma_device_probe+0x38/0x70 [ 1.060017] [<8020e1e8>] really_probe+0x170/0x2e8 [ 1.064891] [<8020e714>] __driver_attach+0xa4/0xec [ 1.069784] [<8020c1e0>] bus_for_each_dev+0x58/0xb0 [ 1.074833] [<8020d590>] bus_add_driver+0xf8/0x218 [ 1.079731] [<8020ef24>] driver_register+0xcc/0x11c [ 1.084804] [<804b54cc>] bgmac_init+0x1c/0x44 [ 1.089258] [<8000121c>] do_one_initcall+0x7c/0x1a0 [ 1.094343] [<804a1d34>] kernel_init_freeable+0x150/0x218 [ 1.099886] [<803a082c>] kernel_init+0x10/0x104 [ 1.104583] [<80005878>] ret_from_kernel_thread+0x14/0x1c [ 1.110107] ---[ end trace f441c0d873d1fb5b ]--- This patch setups a "struct device" (and passes it to the bcma) which allows fixing all the mentioned problems. It'll also require a tiny bcma patch which will follow through the wireless tree & its maintainer. Fixes: f8c55dc6e828 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms") Signed-off-by: Rafał Miłecki Signed-off-by: Paul Burton Acked-by: Hauke Mehrtens Cc: Christoph Hellwig Cc: Linus Walleij Cc: linux-wireless@vger.kernel.org Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Greg Kroah-Hartman

mips: fix n32 compat_ipc_parse_version

2019-01-22T20:40:33+00:00

commit 5a9372f751b5350e0ce3d2ee91832f1feae2c2e5 upstream. While reading through the sysvipc implementation, I noticed that the n32 semctl/shmctl/msgctl system calls behave differently based on whether o32 support is enabled or not: Without o32, the IPC_64 flag passed by user space is rejected but calls without that flag get IPC_64 behavior. As far as I can tell, this was inadvertently changed by a cleanup patch but never noticed by anyone, possibly nobody has tried using sysvipc on n32 after linux-3.19. Change it back to the old behavior now. Fixes: 78aaf956ba3a ("MIPS: Compat: Fix build error if CONFIG_MIPS32_COMPAT but no compat ABI.") Signed-off-by: Arnd Bergmann Signed-off-by: Paul Burton Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # 3.19+ Signed-off-by: Greg Kroah-Hartman

MIPS: Only include mmzone.h when CONFIG_NEED_MULTIPLE_NODES=y

2019-01-09T16:38:49+00:00

commit 66a4059ba72c23ae74a7c702894ff76c4b7eac1f upstream. MIPS' asm/mmzone.h includes the machine/platform mmzone.h unconditionally, but since commit bb53fdf395ee ("MIPS: c-r4k: Add r4k_blast_scache_node for Loongson-3") is included by asm/rk4cache.h for all r4k-style configs regardless of CONFIG_NEED_MULTIPLE_NODES. This is problematic when CONFIG_NEED_MULTIPLE_NODES=n because both the loongson3 & ip27 mmzone.h headers unconditionally define the NODE_DATA preprocessor macro which is aready defined by linux/mmzone.h, resulting in the following build error: In file included from ./arch/mips/include/asm/mmzone.h:10, from ./arch/mips/include/asm/r4kcache.h:23, from arch/mips/mm/c-r4k.c:33: ./arch/mips/include/asm/mach-loongson64/mmzone.h:48: error: "NODE_DATA" redefined [-Werror] #define NODE_DATA(n) (&__node_data[(n)]->pglist) In file included from ./include/linux/topology.h:32, from ./include/linux/irq.h:19, from ./include/asm-generic/hardirq.h:13, from ./arch/mips/include/asm/hardirq.h:16, from ./include/linux/hardirq.h:9, from arch/mips/mm/c-r4k.c:11: ./include/linux/mmzone.h:907: note: this is the location of the previous definition #define NODE_DATA(nid) (&contig_page_data) Resolve this by only including the machine mmzone.h when CONFIG_NEED_MULTIPLE_NODES=y, which also removes the need for the empty mach-generic version of the header which we delete. Signed-off-by: Paul Burton Fixes: bb53fdf395ee ("MIPS: c-r4k: Add r4k_blast_scache_node for Loongson-3") Signed-off-by: Greg Kroah-Hartman

MIPS: Fix a R10000_LLSC_WAR logic in atomic.h

2019-01-09T16:38:48+00:00

commit db1ce3f5d01d2d6d5714aefba0159d2cb5167a0b upstream. Commit 4936084c2ee2 ("MIPS: Cleanup R10000_LLSC_WAR logic in atomic.h") introduce a mistake in atomic64_fetch_##op##_relaxed(), because it forget to delete R10000_LLSC_WAR in the if-condition. So fix it. Fixes: 4936084c2ee2 ("MIPS: Cleanup R10000_LLSC_WAR logic in atomic.h") Signed-off-by: Huacai Chen Signed-off-by: Paul Burton Cc: Joshua Kinard Cc: Ralf Baechle Cc: Steven J . Hill Cc: Fuxin Zhang Cc: Zhangjin Wu Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 4.19+ Signed-off-by: Greg Kroah-Hartman

MIPS: OCTEON: mark RGMII interface disabled on OCTEON III

2019-01-09T16:38:48+00:00

commit edefae94b7b9f10d5efe32dece5a36e9d9ecc29e upstream. Commit 885872b722b7 ("MIPS: Octeon: Add Octeon III CN7xxx interface detection") added RGMII interface detection for OCTEON III, but it results in the following logs: [ 7.165984] ERROR: Unsupported Octeon model in __cvmx_helper_rgmii_probe [ 7.173017] ERROR: Unsupported Octeon model in __cvmx_helper_rgmii_probe The current RGMII routines are valid only for older OCTEONS that use GMX/ASX hardware blocks. On later chips AGL should be used, but support for that is missing in the mainline. Until that is added, mark the interface as disabled. Fixes: 885872b722b7 ("MIPS: Octeon: Add Octeon III CN7xxx interface detection") Signed-off-by: Aaro Koskinen Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # 4.7+ Signed-off-by: Greg Kroah-Hartman

MIPS: Expand MIPS32 ASIDs to 64 bits

2019-01-09T16:38:48+00:00

commit ff4dd232ec45a0e45ea69f28f069f2ab22b4908a upstream. ASIDs have always been stored as unsigned longs, ie. 32 bits on MIPS32 kernels. This is problematic because it is feasible for the ASID version to overflow & wrap around to zero. We currently attempt to handle this overflow by simply setting the ASID version to 1, using asid_first_version(), but we make no attempt to account for the fact that there may be mm_structs with stale ASIDs that have versions which we now reuse due to the overflow & wrap around. Encountering this requires that: 1) A struct mm_struct X is active on CPU A using ASID (V,n). 2) That mm is not used on CPU A for the length of time that it takes for CPU A's asid_cache to overflow & wrap around to the same version V that the mm had in step 1. During this time tasks using the mm could either be sleeping or only scheduled on other CPUs. 3) Some other mm Y becomes active on CPU A and is allocated the same ASID (V,n). 4) mm X now becomes active on CPU A again, and now incorrectly has the same ASID as mm Y. Where struct mm_struct ASIDs are represented above in the format (version, EntryHi.ASID), and on a typical MIPS32 system version will be 24 bits wide & EntryHi.ASID will be 8 bits wide. The length of time required in step 2 is highly dependent upon the CPU & workload, but for a hypothetical 2GHz CPU running a workload which generates a new ASID every 10000 cycles this period is around 248 days. Due to this long period of time & the fact that tasks need to be scheduled in just the right (or wrong, depending upon your inclination) way, this is obviously a difficult bug to encounter but it's entirely possible as evidenced by reports. In order to fix this, simply extend ASIDs to 64 bits even on MIPS32 builds. This will extend the period of time required for the hypothetical system above to encounter the problem from 28 days to around 3 trillion years, which feels safely outside of the realms of possibility. The cost of this is slightly more generated code in some commonly executed paths, but this is pretty minimal: | Code Size Gain | Percentage -----------------------|----------------|------------- decstation_defconfig | +270 | +0.00% 32r2el_defconfig | +652 | +0.01% 32r6el_defconfig | +1000 | +0.01% I have been unable to measure any change in performance of the LMbench lat_ctx or lat_proc tests resulting from the 64b ASIDs on either 32r2el_defconfig+interAptiv or 32r6el_defconfig+I6500 systems. Signed-off-by: Paul Burton Suggested-by: James Hogan References: https://lore.kernel.org/linux-mips/80B78A8B8FEE6145A87579E8435D78C30205D5F3@fzex.ruijie.com.cn/ References: https://lore.kernel.org/linux-mips/1488684260-18867-1-git-send-email-jiwei.sun@windriver.com/ Cc: Jiwei Sun Cc: Yu Huabing Cc: stable@vger.kernel.org # 2.6.12+ Cc: linux-mips@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

MIPS: Align kernel load address to 64KB

2019-01-09T16:38:48+00:00

commit bec0de4cfad21bd284dbddee016ed1767a5d2823 upstream. KEXEC needs the new kernel's load address to be aligned on a page boundary (see sanity_check_segment_list()), but on MIPS the default vmlinuz load address is only explicitly aligned to 16 bytes. Since the largest PAGE_SIZE supported by MIPS kernels is 64KB, increase the alignment calculated by calc_vmlinuz_load_addr to 64KB. Signed-off-by: Huacai Chen Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/21131/ Cc: Ralf Baechle Cc: James Hogan Cc: Steven J . Hill Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang Cc: Zhangjin Wu Cc: # 2.6.36+ Signed-off-by: Greg Kroah-Hartman