talos-obmc-linux/arch/mips, branch dev-5.0

MIPS: Fix kernel crash for R6 in jump label branch function

2019-03-27T05:17:53+00:00

commit 47c25036b60f27b86ab44b66a8861bcf81cde39b upstream. Insert Branch instruction instead of NOP to make sure assembler don't patch code in forbidden slot. In jump label function, it might be possible to patch Control Transfer Instructions(CTIs) into forbidden slot, which will generate Reserved Instruction exception in MIPS release 6. Signed-off-by: Archer Yan Reviewed-by: Paul Burton [paul.burton@mips.com: - Add MIPS prefix to subject. - Mark for stable from v4.0, which introduced r6 support, onwards.] Signed-off-by: Paul Burton Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Greg Kroah-Hartman

MIPS: Ensure ELF appended dtb is relocated

2019-03-27T05:17:53+00:00

commit 3f0a53bc6482fb09770982a8447981260ea258dc upstream. This fixes booting with the combination of CONFIG_RELOCATABLE=y and CONFIG_MIPS_ELF_APPENDED_DTB=y. Sections that appear after the relocation table are not relocated on system boot (except .bss, which has special handling). With CONFIG_MIPS_ELF_APPENDED_DTB, the dtb is part of the vmlinux ELF, so it must be relocated together with everything else. Fixes: 069fd766271d ("MIPS: Reserve space for relocation table") Signed-off-by: Yasha Cherikovsky Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: Paul Burton Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Greg Kroah-Hartman

mips: loongson64: lemote-2f: Add IRQF_NO_SUSPEND to "cascade" irqaction.

2019-03-27T05:17:53+00:00

commit 5f5f67da9781770df0403269bc57d7aae608fecd upstream. Timekeeping IRQs from CS5536 MFGPT are routed to i8259, which then triggers the "cascade" IRQ on MIPS CPU. Without IRQF_NO_SUSPEND in cascade_irqaction, MFGPT interrupts will be masked in suspend mode, and the machine would be unable to resume once suspended. Previously, MIPS IRQs were not disabled properly, so the original code appeared to work. Commit a3e6c1eff5 ("MIPS: IRQ: Fix disable_irq on CPU IRQs") uncovers the bug. To fix it, add IRQF_NO_SUSPEND to cascade_irqaction. This commit is functionally identical to 0add9c2f1cff ("MIPS: Loongson-3: Add IRQF_NO_SUSPEND to Cascade irqaction"), but it forgot to apply the same fix to Loongson2. Signed-off-by: Yifeng Li Signed-off-by: Paul Burton Cc: linux-mips@vger.kernel.org Cc: Jiaxun Yang Cc: Huacai Chen Cc: Ralf Baechle Cc: James Hogan Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: Greg Kroah-Hartman

KVM: Call kvm_arch_memslots_updated() before updating memslots

2019-03-23T19:11:40+00:00

commit 152482580a1b0accb60676063a1ac57b2d12daf6 upstream. kvm_arch_memslots_updated() is at this point in time an x86-specific hook for handling MMIO generation wraparound. x86 stashes 19 bits of the memslots generation number in its MMIO sptes in order to avoid full page fault walks for repeat faults on emulated MMIO addresses. Because only 19 bits are used, wrapping the MMIO generation number is possible, if unlikely. kvm_arch_memslots_updated() alerts x86 that the generation has changed so that it can invalidate all MMIO sptes in case the effective MMIO generation has wrapped so as to avoid using a stale spte, e.g. a (very) old spte that was created with generation==0. Given that the purpose of kvm_arch_memslots_updated() is to prevent consuming stale entries, it needs to be called before the new generation is propagated to memslots. Invalidating the MMIO sptes after updating memslots means that there is a window where a vCPU could dereference the new memslots generation, e.g. 0, and incorrectly reuse an old MMIO spte that was created with (pre-wrap) generation==0. Fixes: e59dbe09f8e6 ("KVM: Introduce kvm_arch_memslots_updated()") Cc: Signed-off-by: Sean Christopherson Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman

MIPS: irq: Allocate accurate order pages for irq stack

2019-03-10T06:09:00+00:00

commit 72faa7a773ca59336f3c889e878de81445c5a85c upstream. The irq_pages is the number of pages for irq stack, but not the order which is needed by __get_free_pages(). We can use get_order() to calculate the accurate order. Signed-off-by: Liu Xiang Signed-off-by: Paul Burton Fixes: fe8bd18ffea5 ("MIPS: Introduce irq_stack") Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.11+ Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-03-02T16:46:34+00:00

Pull networking fixes from David Miller: 1) Fix refcount leak in act_ipt during replace, from Davide Caratti. 2) Set task state properly in tun during blocking reads, from Timur Celik. 3) Leaked reference in DSA, from Wen Yang. 4) NULL deref in act_tunnel_key, from Vlad Buslov. 5) cipso_v4_erro can reference the skb IPCB in inappropriate contexts thus referencing garbage, from Nazarov Sergey. 6) Don't accept RTA_VIA and RTA_GATEWAY in contexts where those attributes make no sense. 7) Fix hung sendto in tipc, from Tung Nguyen. 8) Out-of-bounds access in netlabel, from Paul Moore. 9) Grant reference leak in xen-netback, from Igor Druzhinin. 10) Fix tx stalls with lan743x, from Bryan Whitehead. 11) Fix interrupt storm with mv88e6xxx, from Hein Kallweit. 12) Memory leak in sit on device registry failure, from Mao Wenan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) net: sit: fix memory leak in sit_init_net() net: dsa: mv88e6xxx: Fix statistics on mv88e6161 geneve: correctly handle ipv6.disable module parameter net: dsa: mv88e6xxx: prevent interrupt storm caused by mv88e6390x_port_set_cmode bpf: fix sanitation rewrite in case of non-pointers ipv4: Add ICMPv6 support when parse route ipproto MIPS: eBPF: Fix icache flush end address lan743x: Fix TX Stall Issue net: phy: phylink: fix uninitialized variable in phylink_get_mac_state net: aquantia: regression on cpus with high cores: set mode with 8 queues selftests: fixes for UDP GRO bpf: drop refcount if bpf_map_new_fd() fails in map_create() net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X net: dsa: mv88e6xxx: Fix u64 statistics xen-netback: don't populate the hash cache on XenBus disconnect xen-netback: fix occasional leak of grant ref mappings under memory pressure sctp: chunk.c: correct format string for size_t in printk net: netem: fix skb length BUG_ON in __skb_to_sgvec netlabel: fix out-of-bounds memory accesses ipv4: Pass original device to ip_rcv_finish_core ...

MIPS: eBPF: Fix icache flush end address

2019-03-01T23:04:15+00:00

The MIPS eBPF JIT calls flush_icache_range() in order to ensure the icache observes the code that we just wrote. Unfortunately it gets the end address calculation wrong due to some bad pointer arithmetic. The struct jit_ctx target field is of type pointer to u32, and as such adding one to it will increment the address being pointed to by 4 bytes. Therefore in order to find the address of the end of the code we simply need to add the number of 4 byte instructions emitted, but we mistakenly add the number of instructions multiplied by 4. This results in the call to flush_icache_range() operating on a memory region 4x larger than intended, which is always wasteful and can cause crashes if we overrun into an unmapped page. Fix this by correcting the pointer arithmetic to remove the bogus multiplication, and use braces to remove the need for a set of brackets whilst also making it obvious that the target field is a pointer. Signed-off-by: Paul Burton Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.") Cc: Alexei Starovoitov Cc: Daniel Borkmann Cc: Martin KaFai Lau Cc: Song Liu Cc: Yonghong Song Cc: netdev@vger.kernel.org Cc: bpf@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Daniel Borkmann

Merge tag 'mips_fixes_5.0_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2019-02-28T23:33:10+00:00

Pull MIPS fixes from Paul Burton: "A few more MIPS fixes: - Fix 16b cmpxchg() operations which could erroneously fail if bits 15:8 of the old value are non-zero. In practice I'm not aware of any actual users of 16b cmpxchg() on MIPS, but this fixes the support for it was was introduced in v4.13. - Provide a struct device to dma_alloc_coherent for Lantiq XWAY systems with a "Voice MIPS Macro Core" (VMMC) device. - Provide DMA masks for BCM63xx ethernet devices, fixing a regression introduced in v4.19. - Fix memblock reservation for the kernel when the system has a non-zero PHYS_OFFSET, correcting the memblock conversion performed in v4.20" * tag 'mips_fixes_5.0_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: fix memory setup for platforms with PHYS_OFFSET != 0 MIPS: BCM63XX: provide DMA masks for ethernet devices MIPS: lantiq: pass struct device to DMA API functions MIPS: fix truncation in __cmpxchg_small for short values

MIPS: fix memory setup for platforms with PHYS_OFFSET != 0

2019-02-28T02:49:29+00:00

For platforms, which use a PHYS_OFFSET != 0, symbol _end also contains that offset. So when calling memblock_reserve() for reserving kernel the size argument needs to be adjusted. Fixes: bcec54bf3118 ("mips: switch to NO_BOOTMEM") Acked-by: Mike Rapoport Signed-off-by: Thomas Bogendoerfer Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Mike Rapoport Cc: stable@vger.kernel.org # v4.20+

MIPS: BCM63XX: provide DMA masks for ethernet devices

2019-02-25T20:56:39+00:00

The switch to the generic dma ops made dma masks mandatory, breaking devices having them not set. In case of bcm63xx, it broke ethernet with the following warning when trying to up the device: [ 2.633123] ------------[ cut here ]------------ [ 2.637949] WARNING: CPU: 0 PID: 325 at ./include/linux/dma-mapping.h:516 bcm_enetsw_open+0x160/0xbbc [ 2.647423] Modules linked in: gpio_button_hotplug [ 2.652361] CPU: 0 PID: 325 Comm: ip Not tainted 4.19.16 #0 [ 2.658080] Stack : 80520000 804cd3ec 00000000 00000000 804ccc00 87085bdc 87d3f9d4 804f9a17 [ 2.666707] 8049cf18 00000145 80a942a0 00000204 80ac0000 10008400 87085b90 eb3d5ab7 [ 2.675325] 00000000 00000000 80ac0000 000022b0 00000000 00000000 00000007 00000000 [ 2.683954] 0000007a 80500000 0013b381 00000000 80000000 00000000 804a1664 80289878 [ 2.692572] 00000009 00000204 80ac0000 00000200 00000002 00000000 00000000 80a90000 [ 2.701191] ... [ 2.703701] Call Trace: [ 2.706244] [<8001f3c8>] show_stack+0x58/0x100 [ 2.710840] [<800336e4>] __warn+0xe4/0x118 [ 2.715049] [<800337d4>] warn_slowpath_null+0x48/0x64 [ 2.720237] [<80289878>] bcm_enetsw_open+0x160/0xbbc [ 2.725347] [<802d1d4c>] __dev_open+0xf8/0x16c [ 2.729913] [<802d20cc>] __dev_change_flags+0x100/0x1c4 [ 2.735290] [<802d21b8>] dev_change_flags+0x28/0x70 [ 2.740326] [<803539e0>] devinet_ioctl+0x310/0x7b0 [ 2.745250] [<80355fd8>] inet_ioctl+0x1f8/0x224 [ 2.749939] [<802af290>] sock_ioctl+0x30c/0x488 [ 2.754632] [<80112b34>] do_vfs_ioctl+0x740/0x7dc [ 2.759459] [<80112c20>] ksys_ioctl+0x50/0x94 [ 2.763955] [<800240b8>] syscall_common+0x34/0x58 [ 2.768782] ---[ end trace fb1a6b14d74e28b6 ]--- [ 2.773544] bcm63xx_enetsw bcm63xx_enetsw.0: cannot allocate rx ring 512 Fix this by adding appropriate DMA masks for the platform devices. Fixes: f8c55dc6e828 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms") Signed-off-by: Jonas Gorski Reviewed-by: Christoph Hellwig Reviewed-by: Florian Fainelli Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Ralf Baechle Cc: James Hogan Cc: stable@vger.kernel.org # v4.19+