talos-obmc-linux/arch/arm/include/debug, branch dev-5.0-raptor-04-16-2019

Merge tag 'arm-soc/for-4.21/soc' of https://github.com/Broadcom/stblinux into next/soc

2018-12-03T21:09:38+00:00

This pull request contains Broadcom ARM-based SoCs machine files updates for 4.21, please pull the following: - Stefan switches relevant BCM283x files under arch/arm/mach-bcm to the SPDX license identifiers - Justin adds an entry in the Broadcom STB debug LL stub for 7255 - Florian enables reset controller support for BCM63xx SoCs * tag 'arm-soc/for-4.21/soc' of https://github.com/Broadcom/stblinux: ARM: mach-bcm: Switch bcm2835 and platsmp to SPDX identifier ARM: BCM63XX: Enable reset controller support ARM: brcmstb: Add entry for 7255 Signed-off-by: Olof Johansson

ARM: stm32: debug: add low-level debug support

2018-11-12T18:20:41+00:00

This adds low-level debug support on USART1 for STM32F4 and STM32F7. Compiled via 'CONFIG_DEBUG_LL' and 'CONFIG_EARLY_PRINTK'. Enabled via 'earlyprintk' in bootargs. Signed-off-by: Gerald Baeza Signed-off-by: Bich Hemon Acked-by: Alexandre TORGUE Signed-off-by: Olof Johansson

ARM: brcmstb: Add entry for 7255

2018-11-07T00:40:59+00:00

Add in BCM7255 entry and reorder entries to keep ascending order. Also moved 7278 cause it was out of order. Signed-off-by: Justin Chen Signed-off-by: Florian Fainelli

ARM: shmobile: convert to SPDX identifier

2018-06-18T10:00:29+00:00

Signed-off-by: Wolfram Sang Acked-by: Yoshihiro Shimoda Acked-by: Kuninori Morimoto Signed-off-by: Simon Horman

ARM: brcmstb: Add support for the V7 memory map

2018-05-09T19:14:42+00:00

The 7278 device is the first device that includes support for the V7 memory map developed for use in 64-bit architecture brcmstb devices. This map relocates the register physical offset from 0xF0000000 to 0x0000000008000000. Since the ARM PERIPHBASE value is also relocated in the V7 memory map we can use its value to determine whether this device uses the new V7 memory map and therefore where to look for the SUN_TOP_CTRL register used to identify the chip family. Signed-off-by: Doug Berger Signed-off-by: Florian Fainelli

ARM: EXYNOS: Add SPDX license identifiers

2018-02-12T18:55:21+00:00

Replace GPL license statements with SPDX GPL-2.0 and GPL-2.0+ license identifiers. Signed-off-by: Krzysztof Kozlowski

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2017-11-16T22:05:12+00:00

Pull ARM SoC platform updates from Arnd Bergmann: "Most of the commits are for defconfig changes, to enable newly added drivers or features that people have started using. For the changed lines lines, we have mostly cleanups, the affected platforms are OMAP, Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions. The largest single change is the introduction of the TI "sysc" bus driver, with the intention of cleaning up more legacy code. Two new SoC platforms get added this time: - Allwinner R40 is a modernized version of the A20 chip, now with a Quad-Core ARM Cortex-A7. According to the manufacturer, it is intended for "Smart Hardware" - Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of chips meant for managed gigabit ethernet switches, based around a Cortex-A9 CPU. Finally, we gain SMP support for two platforms: Renesas R-Car E2 and Amlogic Meson8/8b, which were previously added but only supported uniprocessor operation" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits) ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER arm64: defconfig: enable CONFIG_GPIO_UNIPHIER ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b ARM: meson: Add SMP bringup code for Meson8 and Meson8b ARM: smp_scu: allow the platform code to read the SCU CPU status ARM: smp_scu: add a helper for powering on a specific CPU dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init() ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init() ARM: defconfig: select the right SX150X driver arm64: defconfig: Enable QCOM_IOMMU arm64: Add ThunderX drivers to defconfig arm64: defconfig: Enable Tegra PCI controller cpufreq: imx6q: Move speed grading check to cpufreq driver arm64: defconfig: re-enable Qualcomm DB410c USB ARM: configs: stm32: Add MDMA support in STM32 defconfig ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1 bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove bus: ti-sysc: mark PM functions as __maybe_unused ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ARM: brcmstb: Add appropriate ARM_BE8() macros for swapping

2017-09-25T18:56:04+00:00

Building a big-endian kernel for ARCH_BRCMSTB revealed that we would not be correctly polling for the right bit in the busyuart macro, turns out there are a few transformations needed to work with big-endian kernels. First we need to swap the value we read from SUN_TOP_CTRL to properly compare it against our local tables. Then, just like 8250.S we need to swap the value before storing it, and conversely swap it after a load. Signed-off-by: Florian Fainelli

Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

2017-09-12T13:10:44+00:00

Pull ARM updates from Russell King: "Low priority fixes and updates for ARM: - add some missing includes - efficiency improvements in system call entry code when tracing is enabled - ensure ARMv6+ is always built as EABI - export save_stack_trace_tsk() - fix fatal signal handling during mm fault - build translation table base address register from scratch - appropriately align the .data section to a word boundary where we rely on that data being word aligned" * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8691/1: Export save_stack_trace_tsk() ARM: 8692/1: mm: abort uaccess retries upon fatal signal ARM: 8690/1: lpae: build TTB control register value from scratch in v7_ttb_setup ARM: align .data section ARM: always enable AEABI for ARMv6+ ARM: avoid saving and restoring registers unnecessarily ARM: move PC value into r9 ARM: obtain thread info structure later ARM: use aliases for registers in entry-common ARM: 8689/1: scu: add missing errno include ARM: 8688/1: pm: add missing types include