Talos™ II Linux sources for OpenBMC https://git.raptorcs.com/git/talos-obmc-linux/atom?h=dev-5.0-raptor-04-16-2019 2019-01-01T01:36:02+00:00 2019-01-01T01:36:02+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-01-01T01:36:02+00:00 urn:sha1:b7badd1d7aa61087010803affa19bb83fb5a0af1 Pull ARM Device-tree updates from Olof Johansson: "As usual, this is where the bulk of our changes end up landing each merge window. The individual updates are too many to enumerate, many many platforms have seen additions of device descriptions such that they are functionally more complete (in fact, this is often the bulk of updates we see). Instead I've mostly focused on highlighting the new platforms below as they are introduced. Sometimes the introduction is of mostly a fragment, that later gets filled in on later releases, and in some cases it's near-complete platform support. The latter is more common for derivative platforms that already has similar support in-tree. Two SoCs are slight outliers from the usual range of additions. Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping in the Lychee Pi Nano platform. At the other end is NXP Layerscape LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O aimed at infrastructure/networking. TI updates stick out in the diff stats too, in particular because they have moved the description of their L4 on-chip interconnect to devicetree, which opens up for removal of even more of their platform-specific 'hwmod' description tables over the next few releases. SoCs: - Qualcomm QCS404 (4x Cortex-A53) - Allwinner T3 (rebranded R40) and f1c100s (armv5) - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4) - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72) New platforms: - Rockchip: Gru Scarlet (RK3188 Tablet) - Amlogic: Phicomm N1 (S905D), Libretech S805-AC - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708) - Qualcomm: QCS404 base platform and EVB - Qualcomm: Remove of Arrow SD600 - PXA: First PXA3xx DT board: Raumfeld - Aspeed: Facebook Backpack-CMM BMC - Renesas iWave G20D-Q7 (RZ/G1N) - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s) - Allwinner Emlid Neutis N5, Mapleboard MP130 - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE) - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva - VF610: Liebherr's BK4 device, ZII SCU4 AIB board - i.MX7D PICO Hobbit baseboard - i.MX7ULP EVK board - NXP LX2160AQDS and LX2160ARDB boards Other: - Coresight binding updates across the board - CPU cooling maps updates across the board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (648 commits) ARM: dts: suniv: Fix improper bindings include patch ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node ARM: dts: suniv: Fix improper bindings include patch arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller arm64: dts: Remove unused properties from FSL QSPI driver nodes ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes ARM: dts: Remove unused properties from FSL QSPI driver nodes arm64: dts: ti: k3-am654: Enable main domain McSPI0 arm64: dts: ti: k3-am654: Add McSPI DT nodes arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM arm64: dts: ti: k3-am65-main: Add ECAP PWM node arm64: dts: ti: k3-am654-base-board: Add I2C nodes arm64: dts: ti: am654-base-board: Add pinmux for main uart0 arm64: dts: ti: k3-am65: Add pinctrl regions dt-bindings: pinctrl: k3: Introduce pinmux definitions ARM: dts: exynos: Specify I2S assigned clocks in proper node ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2 ... 2018-12-29T04:08:34+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-12-29T04:08:34+00:00 urn:sha1:030672aea826adf3dee9100ee8ac303b62c8fe7f Pull Devicetree updates from Rob Herring: "The biggest highlight here is the start of using json-schema for DT bindings. Being able to validate bindings has been discussed for years with little progress. - Initial support for DT bindings using json-schema language. This is the start of converting DT bindings from free-form text to a structured format. - Reworking of initrd address initialization. This moves to using the phys address instead of virt addr in the DT parsing code. This rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary rebuilding of lots of files. - Fix stale phandle entries in phandle cache - DT overlay validation improvements. This exposed several memory leak bugs which have been fixed. - Use node name and device_type helper functions in DT code - Last remaining conversions to using %pOFn printk specifier instead of device_node.name directly - Create new common RTC binding doc and move all trivial RTC devices out of trivial-devices.txt. - New bindings for Freescale MAG3110 magnetometer, Cadence Sierra PHY, and Xen shared memory - Update dtc to upstream version v1.4.7-57-gf267e674d145" * tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits) of: __of_detach_node() - remove node from phandle cache of: of_node_get()/of_node_put() nodes held in phandle cache gpio-omap.txt: add reg and interrupts properties dt-bindings: mrvl,intc: fix a trivial typo dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110 dt-bindings: Convert trivial-devices.txt to json-schema dt-bindings: arm: mrvl: amend Browstone compatible string dt-bindings: arm: Convert Tegra board/soc bindings to json-schema dt-bindings: arm: Convert ZTE board/soc bindings to json-schema dt-bindings: arm: Add missing Xilinx boards dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema dt-bindings: arm: Convert VIA board/soc bindings to json-schema dt-bindings: arm: Convert ST STi board/soc bindings to json-schema dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema dt-bindings: arm: Convert QCom board/soc bindings to json-schema dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema dt-bindings: arm: Convert Altera board/soc bindings to json-schema ... 2018-12-19T10:21:50+00:00 Manivannan Sadhasivam manivannan.sadhasivam@linaro.org 2018-12-10T17:35:44+00:00 urn:sha1:2e64d317e197ec390e3914773489fcade7bbbf15 Document RDA Micro RDA8810PL SoC timer. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> 2018-12-18T21:22:23+00:00 Biju Das biju.das@bp.renesas.com 2018-11-19T16:14:13+00:00 urn:sha1:e5a805202c8ebb3b27cd8ad1b227158ae9cb9464 Document SoC specific bindings for RZ/G2M (r8a774a1) SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> 2018-12-18T21:22:23+00:00 Biju Das biju.das@bp.renesas.com 2018-10-26T08:36:13+00:00 urn:sha1:2bbaf54216448486def1153486778a975a73041d Document SoC specific compatible strings for r8a77470. No driver change is needed as the fallback strings will activate the right code. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> 2018-12-18T21:22:23+00:00 Biju Das biju.das@bp.renesas.com 2018-10-26T08:01:44+00:00 urn:sha1:f9135ffa8a272bde9928e75ce14d02d4496159ae Document SoC specific bindings for R-Car M3-W (r8a7796) SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> 2018-12-13T15:41:50+00:00 Rob Herring robh@kernel.org 2018-05-14T23:42:37+00:00 urn:sha1:4d2bb3e65035954dce7c666616906004f2c049f8 Convert ARM timers to DT schema format using json-schema. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> 2018-12-12T21:06:47+00:00 Olof Johansson olof@lixom.net 2018-12-12T21:06:47+00:00 urn:sha1:33afb48f32e56700ca77d7d345555927d205d6af RV1108 improvements (uart-dma, clocks, interrupt numbers, gmac support timer and emmc pins) from its first real-world user. RK3188 improvements (OPPv2, cpu node updates) to prepare for a new devicetree, the BQ Edison 2 Quad-Core. VPU device node for rk3288, right now only the jpeg encoder part will be in the kernel but hopefully other codecs will follow. * tag 'v4.21-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add internal timer support for rv1108 ARM: dts: rockchip: add BQ Edison 2 QC devicetree ARM: dts: rockchip: add VPU device node for RK3288 ARM: dts: rockchip: update cpu supplies on rk3188 ARM: dts: rockchip: add phandles to secondary cpu cores ARM: dts: rockchip: add cpu-core resets for rk3188 ARM: dts: rockchip: convert rk3188 to opp-v2 ARM: dts: rockchip: add #sound-dai-cells to Cortex-A9 i2s ARM: dts: rockchip: Add UART DMA support for rv1108 ARM: dts: rockchip: Assign the proper GPIO clocks for rv1108 ARM: dts: rockchip: Fix the PMU interrupt number for rv1108 ARM: dts: rockchip: Pass the 'arm,cpu-registers-not-fw-configured' property on rv1108 ARM: dts: rockchip: Pass the 'clock-latency' property on rv1108 ARM: dts: rockchip: Add rv1108 GMAC support ARM: dts: rockchip: add rv1108 eMMC pin settings Signed-off-by: Olof Johansson <olof@lixom.net> 2018-12-11T19:38:07+00:00 Otavio Salvador otavio@ossystems.com.br 2018-11-26T17:35:06+00:00 urn:sha1:7841b88a8fdddc0e7f3377fc42efe4cb3be1ed8b Add support for the internal timer peripheral on RV1108. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Heiko Stuebner <heiko@sntech.de> 2018-11-30T23:18:03+00:00 Olof Johansson olof@lixom.net 2018-11-30T23:18:03+00:00 urn:sha1:4c4332761e65c6d306f810247fb34d2270a75147 Amlogic 32-bit DT updates for v4.21 - support more timers on meson8 - add the stdout-path property on several boards * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson: add the clock inputs for the Meson timer ARM: dts: meson: add the TIMER B/C/D interrupts ARM: dts: meson: consistently disable pin bias ARM: dts: meson8b: mxq: add the /chosen/stdout-path property ARM: dts: meson8: minix-neo-x8: add the /chosen/stdout-path property ARM: dts: meson6: atv1200: add the /chosen/stdout-path property dt-bindings: timer: meson6_timer: document the clock inputs dt-bindings: timer: meson6_timer: document all interrupts Signed-off-by: Olof Johansson <olof@lixom.net>