path: root/src/build/debug/simics-debug-framework.pl

#!/usr/bin/perl
# IBM_PROLOG_BEGIN_TAG
# This is an automatically generated prolog.
#
# $Source: src/build/debug/simics-debug-framework.pl $
#
# OpenPOWER HostBoot Project
#
# Contributors Listed Below - COPYRIGHT 2011,2016
# [+] Google Inc.
# [+] International Business Machines Corp.
#
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
# implied. See the License for the specific language governing
# permissions and limitations under the License.
#
# IBM_PROLOG_END_TAG
# @file simics-debug-framework.pl
# @brief Implementation of the common debug framework for running in simics.
#
# Simics uses Python for all debug.  This file is a Perl bridge between Python
# and the framework tool modules.  The Python side will create a sub-process of
# this script using STDIN/STDOUT as an IPC message pipe.  This side will
# execute the Perl module and send data / output across the pipe to the Python
# side.

use strict;
use lib $ENV{HB_TOOLPATH};
use Hostboot::_DebugFramework;

$| = 1; # Disable buffering on STDIN/STDOUT.

# @sub sendIPCMsg
# @brief Sends a message to the Python side of the framework over STDOUT.
#
# Messages are of the format:
#       [ "type", "data-in-ascii-encoded-hex" ]
# Example:
#    The message...
#       [ "display", "48656c6c6f20576f726c642e0a" ]
#    means 'display "Hello World.\n"'
sub sendIPCMsg
{
    my ($type, $data) = @_;

    print "[ \"$type\", \"".unpack("H*",$data)."\" ]\n";
}

# @sub recvIPCMsg
# @brief Watis for a message from the Python side of the framework from STDIN.
#
# See sendIPCMsg for message format.
sub recvIPCMsg
{
    my $type = "";
    my $data = "";

    if (my $string = <STDIN>)
    {
        if ($string =~ m/\[ \"([^\"]+)\", \"([0-9a-f]*)\" ]\n/)
        {
            $type = $1;
            $data = pack("H*", $2);
        }
    }

    return ($type, $data);
}

# @sub userDisplay
# @brief Send a 'display' type message to Python.
sub userDisplay
{
    my $string = "";

    foreach my $value (@_)
    {
        $string = $string . $value;
    }

    sendIPCMsg("display", $string);
}

# @sub readData
# @brief Send a 'read-data' type message to Python.
sub readData
{
    my $addr = shift;
    my $size = shift;

    $addr = translateHRMOR($addr);

    sendIPCMsg("read-data", "$addr,$size");

    my ($type, $data) = recvIPCMsg();

    if (length($data) == $size)
    {
        return $data;
    }

    return "";
}

# @sub writeData
# @brief Send a 'write-data' type message to Python.
sub writeData
{
    my $addr = shift;
    my $size = shift;
    my $value = shift;

    $addr = translateHRMOR($addr);

    my $value = unpack("H*", $value);
    sendIPCMsg("write-data", "$addr,$size,$value");

    return;
}

# @sub executeInstrCycles
# @brief Send a 'execute-instrs' type message to Python.
sub executeInstrCycles
{
    my $cycles = shift;
    sendIPCMsg("execute-instrs", "$cycles");
}

# @sub readyForInstructions
# @brief Send a 'ready-for-instr' type message to Python.
# @returns 0 - Not ready or 1 - Ready
sub readyForInstructions
{
    sendIPCMsg("ready-for-instr", "");

    my ($type, $data) = recvIPCMsg();
    if ("1" eq $data)
    {
        return 1;
    }
    return 0;
}

# Image path global.
my $imgPath = "";
sub getImgPath
{
    return $imgPath;
}

# Tool location override.
sub getToolOverride
{
    return $ENV{'HB_TOOLPATH'}
}

# Simics always uses the non-test named files.
sub getIsTest
{
    return 0;
}


# @sub  getEnv
#
# Return the environment that we are running in, simics or vpo
#
sub getEnv
{
    return  "simics";
}

#
#  @sub translateAddr
#   Do scom -> "phys_mem.read" address translation here.
#   The xscom address looks like this:
#    // Layout of XSCOM address parts
#    union
#    {
#        uint64_t mMmioAddress;          // mMmio address
#        struct
#        {
#            uint64_t mReserved1:8;      // Not currently used (0:7)
#            uint64_t mBaseAddrHi:7;     // Base address [8:14] (8:14)
#            uint64_t mNodeId:4;         // Node where target resides (15:18)
#            uint64_t mChipId:3;         // Targeted chip ID (19:21)
#            uint64_t mBaseAddrLo:8;     // Base address [22:29] (22:29)
#            uint64_t mSComAddr:31;      // PIB Address (30:60)
#            uint64_t mAlign:3;          // Align (61:63)
#        } mAddressParts;
#
#   @param[in]  -   64-bit scom address
#
#   @return     =   address to send to python to do mm.read
#
#   @note: "host_xscom_device_mm.read/write " doesn't seem to work with this
#           translated address, use "phys_mem.read/write "  (in python) instead.
#
sub translateAddr
{
    my  $addr   =   shift;
    my  $simicsaddr =   0;

    $simicsaddr =   (    0x000603fc00000000                         ## Base addr
                      | (($addr & 0x000000007fffffff) << 3 ) ## 31 bits, shift 3
                    );

    return $simicsaddr;
}


# @sub readScom
# @brief Send a 'read-scom' type message to Python.
#
# @param[in]    scom address to read
# @param[in]    data size IN BYTES
#
# @return   hex string containing data read
#
# @todo:  handle littleendian
#
sub readScom
{
    my $addr = shift;
    my $size = shift;

    my $simicsaddr  =   translateAddr( $addr);

    ## debug
    ## ::userDisplay  "--- readScom: ", (sprintf("0x%x-->0x%x, 0x%x",$addr,$simicsaddr,$size)), "\n";

    sendIPCMsg("read-scom", "$simicsaddr,$size");

    my ($type, $data) = recvIPCMsg();

    return hex $data;
}

# @sub writeScom
# @brief Send a 'write-scom' type message to Python.
#
# @param[in] - xscom address
# @param[in] - data size    IN BYTES
# @param[in] - binary data value.  Scom value is aways assumed to be 64bits
#
# @return none
#
# @todo:  handle littleendian
#
sub writeScom
{
    my $addr = shift;
    my $size = shift;
    my $value = shift;

    my $simicsaddr  =   translateAddr( $addr);

    ## debug
    ## ::userDisplay  "--- writeScom: ", (sprintf("0x%x-->0x%x, 0x%x, 0x%x",$addr,$simicsaddr,$size,$value)), "\n";

    my  $ipctype    =   "write-scom";
    my  $ipcdata    =   "$simicsaddr,$size,$value";


    sendIPCMsg( $ipctype, $ipcdata );

    ## $$ debug
    ## $$my $debugstr    =   "[ \"$ipctype\", \"".unpack("H*",$ipcdata)."\" ]\n";
    ## $$::userDisplay   "--- $debugstr\n";

    return;
}

# @sub getHRMOR
# @brief Retrieve the HRMOR value
#
my $cached_HRMOR = "";
sub getHRMOR
{
    if ($cached_HRMOR eq "")
    {
        sendIPCMsg("get-hrmor","");
        my ($unused, $hrmor) = recvIPCMsg();
        $cached_HRMOR = $hrmor;
        return $hrmor;
    }

    return $cached_HRMOR;

}


use constant PNOR_RP_HBEXT_SECTION => 1;
use constant PNOR_RP_SECTIONDATA_SIZE => 3 * 8 + 2;
use constant PNOR_RP_SECTIONDATA_FLASHADDR_OFFSET => 2 * 8;


# @sub readExtImage
#
# Reads from the extended image file.
#
# @param addr - Address to read.
# @param size - Size to read.
sub readExtImage
{
    my $addr = shift;
    my $size = shift;

    my ($pnorRPAddr, $pnorRPSize) =
        ::findSymbolAddress("Singleton<PnorRP>::instance()::instance");

    my $extImageOffset +=
        read32($pnorRPAddr +
               (PNOR_RP_SECTIONDATA_SIZE * PNOR_RP_HBEXT_SECTION) +
               PNOR_RP_SECTIONDATA_FLASHADDR_OFFSET);

    $addr += $extImageOffset;
    sendIPCMsg("read-pnor", "$addr,$size");

    my ($type, $data) = recvIPCMsg();

    if (length($data) == $size)
    {
        return $data;
    }

    return "";

}






# Get tool name.
sendIPCMsg("get-tool","");
my ($unused, $tool) = recvIPCMsg();

# Get image path.
sendIPCMsg("get-img-path");
($unused, $imgPath) = recvIPCMsg();
$imgPath = determineImagePath($imgPath);

# If we were called with --usage, send tool help instead of executing.
if ((-1 != $#ARGV) && ("--usage" eq $ARGV[0]))
{
    callToolModuleHelp($tool);
    exit;
}

# Get tool options.
sendIPCMsg("get-tool-options","");
my ($unused, $toolOpts) = recvIPCMsg();
parseToolOpts($toolOpts);

# Execute module.
callToolModule($tool);


##
##  Dummy function to match continuous trace call in VPO
##
sub checkContTrace
{

}