/* IBM_PROLOG_BEGIN_TAG */ /* This is an automatically generated prolog. */ /* */ /* $Source: src/usr/occ/occ_common.C $ */ /* */ /* OpenPOWER HostBoot Project */ /* */ /* Contributors Listed Below - COPYRIGHT 2013,2017 */ /* [+] International Business Machines Corp. */ /* */ /* */ /* Licensed under the Apache License, Version 2.0 (the "License"); */ /* you may not use this file except in compliance with the License. */ /* You may obtain a copy of the License at */ /* */ /* http://www.apache.org/licenses/LICENSE-2.0 */ /* */ /* Unless required by applicable law or agreed to in writing, software */ /* distributed under the License is distributed on an "AS IS" BASIS, */ /* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or */ /* implied. See the License for the specific language governing */ /* permissions and limitations under the License. */ /* */ /* IBM_PROLOG_END_TAG */ #include #include #include #include #include #include #include #include #include #include #include // targeting support #include #include #include #include // fapi support #include #include #include #include // Procedures #include #include #include #include #include #include #include #ifdef CONFIG_ENABLE_CHECKSTOP_ANALYSIS #include #endif // Easy macro replace for unit testing //#define TRACUCOMP(args...) TRACFCOMP(args) #define TRACUCOMP(args...) extern trace_desc_t* g_fapiTd; using namespace TARGETING; namespace HBOCC { /** * @brief Fetches OCC image from FSP and writes to * specified offset. * * @param[in] i_occVirtAddr Virtual * address where OCC image * should be loaded. * * @return errlHndl_t Error log image load failed */ errlHndl_t loadOCCImageToHomer(void* i_occVirtAddr) { TRACUCOMP( g_fapiTd, ENTER_MRK"loadOCCImageToHomer(%p)", i_occVirtAddr); errlHndl_t l_errl = NULL; size_t lidSize = 0; do { UtilLidMgr lidMgr(HBOCC::OCC_LIDID); l_errl = lidMgr.getLidSize(lidSize); if(l_errl) { TRACFCOMP( g_fapiImpTd, ERR_MRK"loadOCCImageToHomer: Error getting lid size. lidId=0x%.8x", OCC_LIDID); break; } l_errl = lidMgr.getLid(i_occVirtAddr, lidSize); if(l_errl) { TRACFCOMP( g_fapiImpTd, ERR_MRK"loadOCCImageToHomer: Error getting lid.. lidId=0x%.8x", OCC_LIDID); break; } }while(0); TRACUCOMP( g_fapiTd, EXIT_MRK"loadOCCImageToHomer"); return l_errl; } #ifdef CONFIG_IPLTIME_CHECKSTOP_ANALYSIS errlHndl_t loadOCCImageDuringIpl( TARGETING::Target* i_target, void* i_occVirtAddr) { TRACUCOMP( g_fapiTd, ENTER_MRK"loadOCCImageDuringIpl(%p)", i_occVirtAddr); errlHndl_t l_errl = NULL; size_t lidSize = 0; void* l_occImage = NULL; do { // allocate memory big enough for all OCC l_occImage = (void*)malloc(1*MEGABYTE); UtilLidMgr lidMgr(HBOCC::OCC_LIDID); // Get the size of the OCC lid l_errl = lidMgr.getLidSize(lidSize); if(l_errl) { TRACFCOMP( g_fapiImpTd, ERR_MRK"loadOCCImageDuringIpl: Error getting lid size. lidId=0x%.8x", OCC_LIDID); break; } // Ensure occ lid size is less than memory allocated for it assert(lidSize <= 1*MEGABYTE); // Get the entire OCC lid and write it into temporary memory l_errl = lidMgr.getLid(l_occImage, lidSize); if(l_errl) { TRACFCOMP( g_fapiImpTd, ERR_MRK"loadOCCImageDuringIpl: Error getting lid. lidId=0x%.8x", OCC_LIDID); break; } // Pointer to OCC LID char *l_occLid = reinterpret_cast(l_occImage); // Get system target in order to access ATTR_NEST_FREQ_MHZ TARGETING::TargetService & tS = TARGETING::targetService(); TARGETING::Target * sysTarget = NULL; tS.getTopLevelTarget( sysTarget ); assert( sysTarget != NULL ); // Save Nest Frequency; ATTR_NEST_FREQ_MHZ_type l_nestFreq = sysTarget->getAttr(); size_t l_length = 0; // length of this section size_t l_startOffset = 0; // offset to start of the section // offset to length of the section size_t l_offsetToLength = OCC_OFFSET_LENGTH; // Get length of OCC bootloader uint32_t *ptrToLength = (uint32_t *)(l_occLid + l_offsetToLength); l_length = *ptrToLength; // We only have PAGESIZE to work with so make sure we do not exceed // limit. assert(l_length <= PAGESIZE); // Write the OCC Bootloader into memory memcpy(i_occVirtAddr, l_occImage, l_length); // OCC Main Application l_startOffset = l_length; // after the Boot image char * l_occMainAppPtr = reinterpret_cast(l_occLid) + l_startOffset; // Get the length of the OCC Main application ptrToLength = (uint32_t *)(l_occMainAppPtr + l_offsetToLength); l_length = *ptrToLength; // write the IPL flag and the nest freq into OCC main app. // IPL_FLAG is a two byte field. OR a 1 into these two bytes. // FREQ is the 4 byte nest frequency value that goes into // the same field in the HOMER. uint16_t *ptrToIplFlag = (uint16_t *)((char *)l_occMainAppPtr + OCC_OFFSET_IPL_FLAG); uint32_t *ptrToFreq = (uint32_t *)((char *)l_occMainAppPtr + OCC_OFFSET_FREQ); *ptrToIplFlag |= 0x0001; *ptrToFreq = l_nestFreq; // Store the OCC Main applicatoin into ecmdDataBuffer // so we may write it to SRAM ecmdDataBufferBase l_occAppData(l_length * 8 /* bits */); uint32_t rc = l_occAppData.insert((uint32_t *)l_occMainAppPtr, 0, l_length * 8 /* bits */); if (rc) { TRACFCOMP( g_fapiImpTd, ERR_MRK"loadOCCImageDuringIpl: Error %d doing insert", rc); // create l_errl break; } // Write the OCC Main app into SRAM const uint32_t l_SramAddrApp = OCC_SRAM_ADDRESS; l_errl = HBOCC::writeSRAM(i_target, l_SramAddrApp, l_occAppData); if(l_errl) { TRACFCOMP( g_fapiImpTd, ERR_MRK"loadOCCImageDuringIpl: Error in writeSRAM of app"); break; } }while(0); //free memory used for OCC lid free(l_occImage); TRACUCOMP( g_fapiTd, EXIT_MRK"loadOCCImageDuringIpl"); return l_errl; } #endif /** * @brief Sets up OCC Host data in Homer */ errlHndl_t loadHostDataToHomer( TARGETING::Target* i_proc, void* i_occHostDataVirtAddr) { TRACUCOMP( g_fapiTd, ENTER_MRK"loadHostDataToHomer(%p)", i_occHostDataVirtAddr); errlHndl_t l_errl = NULL; //Treat virtual address as starting pointer //for config struct HBOCC::occHostConfigDataArea_t * config_data = reinterpret_cast (i_occHostDataVirtAddr); // Get top level system target TARGETING::TargetService & tS = TARGETING::targetService(); TARGETING::Target * sysTarget = NULL; tS.getTopLevelTarget( sysTarget ); assert( sysTarget != NULL ); uint32_t nestFreq = sysTarget->getAttr(); config_data->version = HBOCC::OccHostDataVersion; config_data->nestFrequency = nestFreq; // Figure out the interrupt type if( INITSERVICE::spBaseServicesEnabled() ) { config_data->interruptType = USE_FSI2HOST_MAILBOX; } else { config_data->interruptType = USE_PSIHB_COMPLEX; } #ifdef CONFIG_ENABLE_CHECKSTOP_ANALYSIS // Figure out the FIR master TARGETING::Target* masterproc = NULL; tS.masterProcChipTargetHandle( masterproc ); if( masterproc == i_proc ) { config_data->firMaster = IS_FIR_MASTER; #if !defined(__HOSTBOOT_RUNTIME) || defined(CONFIG_HBRT_PRD) l_errl = PRDF::writeHomerFirData( config_data->firdataConfig, sizeof(config_data->firdataConfig) ); #endif } else { config_data->firMaster = NOT_FIR_MASTER; } #else config_data->firMaster = 0; //force to an older version so we can support // older levels of OCC config_data->version = PRE_FIR_MASTER_VERSION; #endif TRACUCOMP( g_fapiTd, EXIT_MRK"loadHostDataToHomer"); return l_errl; } // loadHostDataToHomer #ifdef CONFIG_IPLTIME_CHECKSTOP_ANALYSIS #ifndef __HOSTBOOT_RUNTIME /** * @brief Sets up OCC Host data in SRAM */ errlHndl_t loadHostDataToSRAM( TARGETING::Target* i_proc, const PRDF::HwInitialized_t i_curHw) { TRACUCOMP( g_fapiTd, ENTER_MRK"loadHostDataToSRAM i_curHw=%d",i_curHw); errlHndl_t l_errl = NULL; //Treat virtual address as starting pointer //for config struct HBOCC::occHostConfigDataArea_t * config_data = new HBOCC::occHostConfigDataArea_t(); // Get top level system target TARGETING::TargetService & tS = TARGETING::targetService(); TARGETING::Target * sysTarget = NULL; tS.getTopLevelTarget( sysTarget ); assert( sysTarget != NULL ); uint32_t nestFreq = sysTarget->getAttr(); config_data->version = HBOCC::OccHostDataVersion; config_data->nestFrequency = nestFreq; // Figure out the interrupt type if( INITSERVICE::spBaseServicesEnabled() ) { config_data->interruptType = USE_FSI2HOST_MAILBOX; } else { config_data->interruptType = USE_PSIHB_COMPLEX; } config_data->firMaster = IS_FIR_MASTER; l_errl = PRDF::writeHomerFirData( config_data->firdataConfig, sizeof(config_data->firdataConfig), i_curHw); if (l_errl) { TRACFCOMP( g_fapiImpTd, ERR_MRK"loadHostDataToSRAM: Error in writeHomerFirData"); } else { const uint32_t l_SramAddrFir = OCC_SRAM_FIR_DATA; ecmdDataBufferBase l_occFirData(OCC_SRAM_FIR_LENGTH * 8 /* bits */); /// copy config_data in here uint32_t rc = l_occFirData.insert( (uint32_t *)config_data->firdataConfig, 0, sizeof(config_data->firdataConfig) * 8 /* bits */); if (rc) { TRACFCOMP( g_fapiImpTd, ERR_MRK"loadHostDataToSRAM: Error %d doing insert", rc); /*@ * @errortype * @moduleid fapi::MOD_OCC_LOAD_HOST_DATA_TO_SRAM * @reasoncode fapi::RC_ECMD_INSERT_FAILED * @userdata1 Return Code * @userdata2 0 * @devdesc ecmd insert failed for l_occFirData * @custdesc A problem occurred during the IPL * of the system. */ l_errl = new ERRORLOG::ErrlEntry( ERRORLOG::ERRL_SEV_UNRECOVERABLE, fapi::MOD_OCC_LOAD_HOST_DATA_TO_SRAM, fapi::RC_ECMD_INSERT_FAILED, rc, 0); } else { l_errl = HBOCC::writeSRAM(i_proc, l_SramAddrFir, l_occFirData); if(l_errl) { TRACFCOMP( g_fapiImpTd, ERR_MRK"loadHostDataToSRAM: Error in writeSRAM"); } } } TRACUCOMP( g_fapiTd, EXIT_MRK"loadHostDataToSRAM"); return l_errl; } // loadHostDataToSRAM #endif #endif errlHndl_t loadOCC(TARGETING::Target* i_target, uint64_t i_occImgPaddr, uint64_t i_occImgVaddr, // dest uint64_t i_commonPhysAddr, bool i_useSRAM) { errlHndl_t l_errl = NULL; TRACFCOMP( g_fapiTd, ENTER_MRK"loadOCC(0x%08X, 0x%08X, 0x%08X, %d)", i_occImgPaddr, i_occImgVaddr, i_commonPhysAddr, i_useSRAM); do{ // Remember where we put things // Subtract HOMER_OFFSET_TO_OCC_IMG to be technically // correct though HOMER_OFFSET_TO_OCC_IMG happens to be zero i_target->setAttr (i_occImgPaddr - HOMER_OFFSET_TO_OCC_IMG); i_target->setAttr (i_occImgVaddr - HOMER_OFFSET_TO_OCC_IMG); // cast OUR type of target to a FAPI type of target. const fapi::Target l_fapiTarg(fapi::TARGET_TYPE_PROC_CHIP, (const_cast(i_target))); TRACFCOMP( g_fapiTd, "FapiTarget: %s",l_fapiTarg.toEcmdString()); //============================== //Setup for OCC Load //============================== // BAR0 is the Entire HOMER (start of HOMER contains OCC base Image) // Bar size is in MB, obtained value of 4MB from Greg Still TRACUCOMP( g_fapiImpTd, INFO_MRK"loadOCC: OCC Address: 0x%.8X, size=0x%.8X", i_occImgPaddr, VMM_HOMER_INSTANCE_SIZE_IN_MB); FAPI_INVOKE_HWP( l_errl, p8_pba_bar_config, l_fapiTarg, 0, i_occImgPaddr, VMM_HOMER_INSTANCE_SIZE_IN_MB, PBA_CMD_SCOPE_NODAL ); if (l_errl) { TRACFCOMP( g_fapiImpTd, ERR_MRK"loadOCC: Bar0 config failed!" ); l_errl->collectTrace(FAPI_TRACE_NAME,256); l_errl->collectTrace(FAPI_IMP_TRACE_NAME,256); break; } // BAR1 is what OCC uses to talk to the Centaur // Bar size is in MB uint64_t centaur_addr = i_target->getAttr(); FAPI_INVOKE_HWP( l_errl, p8_pba_bar_config, l_fapiTarg, 1, //i_index centaur_addr, //i_pba_bar_addr (uint64_t)OCC_IBSCOM_RANGE_IN_MB, //i_pba_bar_size PBA_CMD_SCOPE_NODAL ); //i_pba_cmd_scope if ( l_errl ) { TRACFCOMP( g_fapiImpTd, ERR_MRK"loadOCC: Bar1 config failed!" ); l_errl->collectTrace(FAPI_TRACE_NAME,256); l_errl->collectTrace(FAPI_IMP_TRACE_NAME,256); break; } // BAR3 is the OCC Common Area // Bar size is in MB, obtained value of 8MB from Tim Hallett TARGETING::Target* sys = NULL; TARGETING::targetService().getTopLevelTarget(sys); sys->setAttr(i_commonPhysAddr); TRACUCOMP( g_fapiImpTd, INFO_MRK"loadOCC: OCC Common Addr: 0x%.8X,size=0x%.8X", i_commonPhysAddr,VMM_OCC_COMMON_SIZE_IN_MB); FAPI_INVOKE_HWP( l_errl, p8_pba_bar_config, l_fapiTarg, 3, i_commonPhysAddr, VMM_OCC_COMMON_SIZE_IN_MB, PBA_CMD_SCOPE_NODAL ); if ( l_errl ) { TRACFCOMP( g_fapiImpTd, ERR_MRK"loadOCC: Bar3 config failed!" ); l_errl->collectTrace(FAPI_TRACE_NAME,256); l_errl->collectTrace(FAPI_IMP_TRACE_NAME,256); break; } #ifdef CONFIG_IPLTIME_CHECKSTOP_ANALYSIS if (i_useSRAM) { void* occVirt = reinterpret_cast(i_occImgVaddr); l_errl = loadOCCImageDuringIpl( i_target, occVirt ); if( l_errl ) { TRACFCOMP(g_fapiImpTd, ERR_MRK"loadOCC: loadOCCImageDuringIpl failed!"); break; } } else #endif { //============================== //Load the OCC HOMER image //============================== #ifdef CONFIG_IPLTIME_CHECKSTOP_ANALYSIS // clear (up to and including) the IPL Flag const uint32_t l_SramAddrApp = OCC_SRAM_ADDRESS; ecmdDataBufferBase l_occAppData((OCC_OFFSET_IPL_FLAG + 6) * 8 /* bits */); l_errl = HBOCC::writeSRAM(i_target, l_SramAddrApp, l_occAppData); if(l_errl) { TRACFCOMP( g_fapiImpTd, ERR_MRK"loadOCC: Error in writeSRAM of 0"); break; } #endif void* occVirt = reinterpret_cast(i_occImgVaddr); l_errl = loadOCCImageToHomer( occVirt ); if( l_errl ) { TRACFCOMP(g_fapiImpTd, ERR_MRK"loadOCC: loadOCCImageToHomer failed!"); break; } } }while(0); TRACFCOMP( g_fapiTd, EXIT_MRK"loadOCC"); return l_errl; } /** * @brief Start OCC for specified DCM pair of processors. * If 2nd input is NULL, OCC will be setup on just * one target. */ errlHndl_t startOCC (Target* i_target0, Target* i_target1, Target *& o_failedTarget) { TRACFCOMP( g_fapiTd, ENTER_MRK"startOCC"); errlHndl_t l_errl = NULL; // cast OUR type of target to a FAPI type of target. // figure out homer offsets const fapi::Target l_fapiTarg0(fapi::TARGET_TYPE_PROC_CHIP, (const_cast(i_target0))); fapi::Target l_fapiTarg1; if(i_target1) { l_fapiTarg1.setType(fapi::TARGET_TYPE_PROC_CHIP); l_fapiTarg1.set(const_cast(i_target1)); } else { l_fapiTarg1.setType(fapi::TARGET_TYPE_NONE); } do { //============================== // Initialize the logic //============================== // Config path // p8_pm_init.C enum: PM_CONFIG FAPI_INVOKE_HWP( l_errl, p8_pm_init, l_fapiTarg0, l_fapiTarg1, PM_CONFIG ); if ( l_errl != NULL ) { o_failedTarget = i_target0; TRACFCOMP( g_fapiImpTd, ERR_MRK"startOCC: p8_pm_init, config failed!"); l_errl->collectTrace(FAPI_TRACE_NAME,256); l_errl->collectTrace(FAPI_IMP_TRACE_NAME,256); break; } // Init path // p8_pm_init.C enum: PM_INIT FAPI_INVOKE_HWP( l_errl, p8_pm_init, l_fapiTarg0, l_fapiTarg1, PM_INIT ); if ( l_errl != NULL ) { o_failedTarget = i_target0; TRACFCOMP( g_fapiImpTd, ERR_MRK"startOCC: p8_pm_init, init failed!" ); l_errl->collectTrace(FAPI_TRACE_NAME,256); l_errl->collectTrace(FAPI_IMP_TRACE_NAME,256); break; } //============================== //Start the OCC on primary chip of DCM //============================== FAPI_INVOKE_HWP( l_errl, p8_occ_control, l_fapiTarg0, PPC405_RESET_OFF, PPC405_BOOT_MEM ); if ( l_errl != NULL ) { o_failedTarget = i_target0; TRACFCOMP( g_fapiImpTd, ERR_MRK"startOCC: occ_control failed!"); l_errl->collectTrace(FAPI_TRACE_NAME,256); l_errl->collectTrace(FAPI_IMP_TRACE_NAME,256); break; } //============================== // Start the OCC on slave chip of DCM //============================== if ( l_fapiTarg1.getType() != fapi::TARGET_TYPE_NONE ) { FAPI_INVOKE_HWP( l_errl, p8_occ_control, l_fapiTarg1, PPC405_RESET_OFF, PPC405_BOOT_MEM ); if ( l_errl != NULL ) { o_failedTarget = i_target1; TRACFCOMP( g_fapiImpTd, ERR_MRK"startOCCocc_control failed on slave chip!"); l_errl->collectTrace(FAPI_TRACE_NAME,256); l_errl->collectTrace(FAPI_IMP_TRACE_NAME,256); break; } } } while (0); TRACFCOMP( g_fapiTd, EXIT_MRK"startOCC"); return l_errl; } /** * @brief Stop OCC for specified DCM pair of processors. * If 2nd input is NULL, OCC will be setup on just * one target. */ errlHndl_t stopOCC(TARGETING::Target * i_target0, TARGETING::Target * i_target1) { TRACFCOMP( g_fapiTd, ENTER_MRK"stopOCC"); errlHndl_t err = NULL; do { const fapi::Target l_fapiTarg0(fapi::TARGET_TYPE_PROC_CHIP, (const_cast(i_target0))); fapi::Target l_fapiTarg1; if(i_target1) { l_fapiTarg1.setType(fapi::TARGET_TYPE_PROC_CHIP); l_fapiTarg1.set(const_cast(i_target1)); } else { l_fapiTarg1.setType(fapi::TARGET_TYPE_NONE); } FAPI_INVOKE_HWP( err, p8_pm_prep_for_reset, l_fapiTarg0, l_fapiTarg1, PM_RESET ); if ( err != NULL ) { TRACFCOMP( g_fapiTd, ERR_MRK"stopOCC:p8_pm_prep_for_reset failed!" ); err->collectTrace(FAPI_TRACE_NAME,256); err->collectTrace(FAPI_IMP_TRACE_NAME,256); break; } } while(0); TRACFCOMP( g_fapiTd, EXIT_MRK"stopOCC"); return err; } /** * @brief Stops OCCs on all Processors in the node */ errlHndl_t stopAllOCCs() { TRACFCOMP( g_fapiTd,ENTER_MRK"stopAllOCCs" ); errlHndl_t l_errl = NULL; bool winkle_loaded = false; do { #ifndef __HOSTBOOT_RUNTIME //OCC requires the build_winkle_images library if ( !VFS::module_is_loaded( "libbuild_winkle_images.so" ) ) { l_errl = VFS::module_load( "libbuild_winkle_images.so" ); if ( l_errl ) { // load module returned with errl set TRACFCOMP( g_fapiTd,ERR_MRK"loadnStartAllOccs: Could not load build_winkle module" ); // break from do loop if error occured break; } winkle_loaded = true; } #endif TargetHandleList procChips; getAllChips(procChips, TYPE_PROC, true); if(procChips.size() == 0) { TRACFCOMP( g_fapiTd,INFO_MRK"loadnStartAllOccs: No processors found" ); //We'll never get this far in the IPL without any processors, // so just exit. break; } TRACFCOMP( g_fapiTd, INFO_MRK"loadnStartAllOccs: %d procs found", procChips.size()); //The OCC Procedures require processors within a DCM be //setup together. If DCM installed is set, we work under //the assumption that each nodeID is a DCM. So sort the //list by NodeID then call OCC Procedures on NodeID pairs. std::sort(procChips.begin(), procChips.end(), orderByNodeAndPosition); //The OCC master for the node must be reset last. For all //OP systems there is only a single OCC that can be the //master so it is safe to look at the MASTER_CAPABLE flag. Target* masterProc0 = NULL; Target* masterProc1 = NULL; TargetHandleList::iterator itr1 = procChips.begin(); if(0 == (*itr1)->getAttr()) { TRACUCOMP( g_fapiTd, INFO_MRK"stopAllOCCs: non-dcm path entered"); for (TargetHandleList::iterator itr = procChips.begin(); itr != procChips.end(); ++itr) { TargetHandleList pOccs; getChildChiplets(pOccs, *itr, TYPE_OCC); if (pOccs.size() > 0) { if( pOccs[0]->getAttr() ) { masterProc0 = *itr; continue; } } l_errl = HBOCC::stopOCC( *itr, NULL ); if (l_errl) { TRACFCOMP( g_fapiImpTd, ERR_MRK"stopAllOCCs: stop failed"); errlCommit (l_errl, HWPF_COMP_ID); // just commit and try the next chip } } if (l_errl) { break; } } else { TRACFCOMP( g_fapiTd, INFO_MRK"stopAllOCCs: Following DCM Path"); for (TargetHandleList::iterator itr = procChips.begin(); itr != procChips.end(); ++itr) { Target* targ0 = *itr; Target* targ1 = NULL; TRACFCOMP( g_fapiImpTd, INFO_MRK"stopAllOCCs: Cur target nodeID=%d", targ0->getAttr()); //if the next target in the list is in the same node // they are on the same DCM, so bump itr forward // and update targ0 pointer if((itr+1) != procChips.end()) { TRACFCOMP( g_fapiImpTd, INFO_MRK"stopAllOCCs: n+1 target nodeID=%d", ((*(itr+1))->getAttr())); if((targ0->getAttr()) == ((*(itr+1))->getAttr())) { //need to flip the numbers because we were reversed targ1 = targ0; itr++; targ0 = *itr; } } TargetHandleList pOccs; getChildChiplets(pOccs, targ0, TYPE_OCC); if (pOccs.size() > 0) { if( pOccs[0]->getAttr() ) { masterProc0 = targ0; masterProc1 = targ1; continue; } } l_errl = HBOCC::stopOCC( targ0, targ1 ); if (l_errl) { TRACFCOMP( g_fapiImpTd, ERR_MRK"stopAllOCCs: stop failed"); errlCommit (l_errl, HWPF_COMP_ID); // just commit and try the next module } } if (l_errl) { break; } } //now do the master OCC if( masterProc0 ) { l_errl = HBOCC::stopOCC( masterProc0, masterProc1 ); if (l_errl) { TRACFCOMP( g_fapiImpTd, ERR_MRK"stopAllOCCs: stop failed on master"); break; } } } while(0); //make sure we always unload the module if we loaded it if (winkle_loaded) { #ifndef __HOSTBOOT_RUNTIME errlHndl_t l_tmpErrl = VFS::module_unload( "libbuild_winkle_images.so" ); if ( l_tmpErrl ) { TRACFCOMP( g_fapiTd,ERR_MRK"stopAllOCCs: Error unloading build_winkle module" ); if(l_errl) { errlCommit( l_tmpErrl, HWPF_COMP_ID ); } else { l_errl = l_tmpErrl; } } #endif } TRACFCOMP( g_fapiTd,EXIT_MRK"stopAllOCCs" ); return l_errl; } } //end OCC namespace