/* IBM_PROLOG_BEGIN_TAG */ /* This is an automatically generated prolog. */ /* */ /* $Source: src/usr/isteps/istep12/call_mss_getecid.C $ */ /* */ /* OpenPOWER HostBoot Project */ /* */ /* Contributors Listed Below - COPYRIGHT 2015 */ /* [+] International Business Machines Corp. */ /* */ /* */ /* Licensed under the Apache License, Version 2.0 (the "License"); */ /* you may not use this file except in compliance with the License. */ /* You may obtain a copy of the License at */ /* */ /* http://www.apache.org/licenses/LICENSE-2.0 */ /* */ /* Unless required by applicable law or agreed to in writing, software */ /* distributed under the License is distributed on an "AS IS" BASIS, */ /* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or */ /* implied. See the License for the specific language governing */ /* permissions and limitations under the License. */ /* */ /* IBM_PROLOG_END_TAG */ #include #include #include #include // targeting support. #include #include using namespace ISTEP; using namespace ISTEP_ERROR; using namespace ERRORLOG; using namespace TARGETING; namespace ISTEP_12 { void* call_mss_getecid (void *io_pArgs) { IStepError l_StepError; /* //@TODO RTC:133831 errlHndl_t l_err = NULL; uint8_t l_ddr_port_status = 0; uint8_t l_cache_enable = 0; uint8_t l_centaur_sub_revision = 0; ecid_user_struct l_ecidUser; // Do not need to be initalized by caller mss_get_cen_ecid_ddr_status l_mbaBadMask[2] = { MSS_GET_CEN_ECID_DDR_STATUS_MBA0_BAD, MSS_GET_CEN_ECID_DDR_STATUS_MBA1_BAD }; TRACDCOMP( ISTEPS_TRACE::g_trac_isteps_trace, "call_mss_getecid entry" ); // Get all Centaur targets TARGETING::TargetHandleList l_membufTargetList; getAllChips(l_membufTargetList, TYPE_MEMBUF); for (TargetHandleList::const_iterator l_membuf_iter = l_membufTargetList.begin(); l_membuf_iter != l_membufTargetList.end(); ++l_membuf_iter) { // make a local copy of the target for ease of use TARGETING::Target* l_pCentaur = *l_membuf_iter; // Dump current run on target TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace, "Running mss_get_cen_ecid HWP on " "target HUID %.8X", TARGETING::get_huid(l_pCentaur)); // Cast to a FAPI type of target. const fapi::Target l_fapi_centaur( TARGET_TYPE_MEMBUF_CHIP, (const_cast(l_pCentaur)) ); // call the HWP with each fapi::Target // Note: This HWP does not actually return the entire ECID data. It // updates the attribute ATTR_MSS_ECID and returns the DDR port status // which is a portion of the ECID data. FAPI_INVOKE_HWP(l_err, mss_get_cen_ecid, l_fapi_centaur, l_ddr_port_status, l_cache_enable, l_centaur_sub_revision, l_ecidUser); if (l_err) { TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace, "ERROR 0x%.8X: mss_get_cen_ecid HWP returns error", l_err->reasonCode()); // capture the target data in the elog ErrlUserDetailsTarget(l_pCentaur).addToLog( l_err ); // Create IStep error log and cross reference error that occurred l_StepError.addErrorDetails( l_err ); // Commit Error errlCommit( l_err, HWPF_COMP_ID ); } else { if (MSS_GET_CEN_ECID_DDR_STATUS_ALL_GOOD != l_ddr_port_status) { // Check the DDR port status returned by mss_get_cen_ecid to // see which MBA is bad. If the MBA's state is // functional and the DDR port status indicates that it's bad, // then set the MBA to nonfunctional. If the MBA's state is // nonfunctional, then do nothing since we don't want to // override previous settings. // Find the functional MBAs associated with this Centaur PredicateCTM l_mba_pred(CLASS_UNIT,TYPE_MBA); TARGETING::TargetHandleList l_mbaTargetList; getChildChiplets(l_mbaTargetList, l_pCentaur, TYPE_MBA); uint8_t l_num_func_mbas = l_mbaTargetList.size(); for (TargetHandleList::const_iterator l_mba_iter = l_mbaTargetList.begin(); l_mba_iter != l_mbaTargetList.end(); ++l_mba_iter) { // Make a local copy of the target for ease of use TARGETING::Target* l_pMBA = *l_mba_iter; // Get the MBA chip unit position ATTR_CHIP_UNIT_type l_pos = l_pMBA->getAttr(); // Check the DDR port status to see if this MBA should be // set to nonfunctional. if ( l_ddr_port_status & l_mbaBadMask[l_pos] ) { // call HWAS to deconfigure this target l_err = HWAS::theDeconfigGard().deconfigureTarget( *l_pMBA, HWAS::DeconfigGard:: DECONFIGURED_BY_MEMORY_CONFIG); l_num_func_mbas--; if (l_err) { // shouldn't happen, but if it does, stop trying to // deconfigure targets.. break; } } } // for if (l_err) { TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace, "ERROR: error deconfiguring MBA or Centaur"); // Create IStep error log and cross ref error that occurred l_StepError.addErrorDetails( l_err ); // Commit Error errlCommit( l_err, HWPF_COMP_ID ); } } // mss_get_cen_ecid returns if the L4 cache is enabled. This can be // - fapi::ENUM_ATTR_MSS_CACHE_ENABLE_OFF // - fapi::ENUM_ATTR_MSS_CACHE_ENABLE_ON // - fapi::ENUM_ATTR_MSS_CACHE_ENABLE_HALF_A // - fapi::ENUM_ATTR_MSS_CACHE_ENABLE_HALF_B // - fapi::ENUM_ATTR_MSS_CACHE_ENABLE_UNK_OFF // - fapi::ENUM_ATTR_MSS_CACHE_ENABLE_UNK_ON // - fapi::ENUM_ATTR_MSS_CACHE_ENABLE_UNK_HALF_A // - fapi::ENUM_ATTR_MSS_CACHE_ENABLE_UNK_HALF_B // The UNK values are for DD1.* Centaur chips where the fuses were // not blown correctly so the cache may not be in the correct state. // // Firmware does not normally support HALF enabled // If ON then ATTR_MSS_CACHE_ENABLE is set to ON // Else ATTR_MSS_CACHE_ENABLE is set to OFF and the L4 Target is // deconfigured // // However, an engineer can override ATTR_MSS_CACHE_ENABLE. If they // override it to HALF_A or HALF_B then // - ATTR_MSS_CACHE_ENABLE is set to HALF_X // - The L4 Target is not deconfigured if (l_cache_enable != fapi::ENUM_ATTR_MSS_CACHE_ENABLE_ON) { TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace, "call_mss_getecid: mss_get_cen_ecid returned L4 not-on (0x%02x)", l_cache_enable); l_cache_enable = fapi::ENUM_ATTR_MSS_CACHE_ENABLE_OFF; } // Set the ATTR_MSS_CACHE_ENABLE attribute l_pCentaur->setAttr( l_cache_enable); // Read the ATTR_MSS_CACHE_ENABLE back to pick up any override uint8_t l_cache_enable_attr = l_pCentaur->getAttr(); if (l_cache_enable != l_cache_enable_attr) { TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace, "call_mss_getecid: ATTR_MSS_CACHE_ENABLE override (0x%02x)", l_cache_enable_attr); } // At this point HALF_A/HALF_B are only possible due to override if ((l_cache_enable_attr != fapi::ENUM_ATTR_MSS_CACHE_ENABLE_ON) && (l_cache_enable_attr != fapi::ENUM_ATTR_MSS_CACHE_ENABLE_HALF_A) && (l_cache_enable_attr != fapi::ENUM_ATTR_MSS_CACHE_ENABLE_HALF_B)) { // Deconfigure the L4 Cache Targets (there should be 1) TargetHandleList l_list; getChildChiplets(l_list, l_pCentaur, TYPE_L4, false); TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace, "call_mss_getecid: deconfiguring %d L4s (Centaur huid: 0x%.8X)", l_list.size(), get_huid(l_pCentaur)); for (TargetHandleList::const_iterator l_l4_iter = l_list.begin(); l_l4_iter != l_list.end(); ++l_l4_iter) { TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace, "call_mss_getecid: deconfiguring L4 (huid: 0x%.8X)", get_huid( *l_l4_iter)); l_err = HWAS::theDeconfigGard(). deconfigureTarget(**l_l4_iter , HWAS::DeconfigGard:: DECONFIGURED_BY_MEMORY_CONFIG); if (l_err) { TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace, "ERROR: error deconfiguring Centaur L4"); // Create IStep error log // and cross reference error that occurred l_StepError.addErrorDetails( l_err); // Commit Error errlCommit(l_err, HWPF_COMP_ID); } } } else { TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace, "call_mss_getecid: Centaur L4 good, not deconfiguring"); } } TRACFCOMP( ISTEPS_TRACE::g_trac_isteps_trace, "SUCCESS : mss_get_cen_ecid HWP( )" ); } #ifdef CONFIG_BMC_IPMI // Gather + Send the IPMI Fru Inventory data to the BMC IPMIFRUINV::setData(true); #endif TRACDCOMP( ISTEPS_TRACE::g_trac_isteps_trace, "call_mss_getecid exit" ); */ // end task, returning any errorlogs to IStepDisp return l_StepError.getErrorHandle(); } };