IO_RUN_TRAINING_INVALID_ARGS_RC
Invalid or out-of-range argument value(s) presented to IO_RUN_TRAINING HWP.
IO_RUN_TRAINING_INTERNAL_ERR_RC
Unexpected internal program logic error.
IO_RUN_TRAINING_FAIL_ERR_RC
Training fail was reported in a P8 or Centaur status register
IO_RUN_TRAINING_FAIL_WIRETEST_RC
Wiretest Training fail was reported in a P8 or Centaur status register
IO_RUN_TRAINING_FAIL_DESKEW_RC
Deskew Training fail was reported in a P8 or Centaur status register
IO_RUN_TRAINING_FAIL_EYE_OPT_RC
Eye Optimization Training fail was reported in a P8 or Centaur status register
IO_RUN_TRAINING_FAIL_REPAIR_RC
Static Repair Training fail was reported in a P8 or Centaur status register
IO_RUN_TRAINING_FAIL_FUNC_MODE_RC
Functional mode Training fail was reported in a P8 or Centaur status register
IO_RUN_TRAINING_WIRETEST_TIMEOUT_RC
io run training wiretest timed out waiting for pass/fail indication in the p8 or centaur Status Registers
IO_RUN_TRAINING_DESKEW_TIMEOUT_RC
io run training deskew timed out waiting for pass/fail indication in the p8 or centaur Status Registers
IO_RUN_TRAINING_EYE_OPT_TIMEOUT_RC
io run training eye opt timed out waiting for pass/fail indication in the p8 or centaur Status Registers
IO_RUN_TRAINING_REPAIR_TIMEOUT_RC
io run training repair timed out waiting for pass/fail indication in the p8 or centaur Status Registers
IO_RUN_TRAINING_FUNC_MODE_TIMEOUT_RC
io run training functional mode timed out waiting for pass/fail indication in the p8 or centaur Status Registers
IO_GCR_WRITE_MISMATCH_RC
IO GCR write operation failed to readback data that was written
READ_BUF
WRITE_BUF
IO_RUN_TRAINING_DLL_WORKAROUND_FAIL
DLL Workaround failed to arrive at a solution
IO_RUN_TRAINING_DLL_VAL_OUT_OF_BOUND_RC
DLL Workaround encountered unexpected start value
IO_RUN_TRAINING_INVALID_INVOCATION_RC
io run training invoked with wrong pair of targets
IO_DCCAL_OFFCAL_TIMEOUT_RC
io offset cal timedout
IO_DCCAL_OFFCAL_ERROR_RC
io offset cal errored out
IO_DCCAL_INVALID_INVOCATION_RC
io dc cal invoked with wrong pair of targets
IO_DCCAL_ZCAL_ERROR_RC
io impedance cal errored out
IO_DCCAL_ZCAL_TIMEOUT_RC
io impedance cal timed out
IO_DCCAL_ZCALN_VALUE_OUT_OF_RANGE_RC
Impedance calibration zcal_n value out of range
IO_DCCAL_ZCALP_VALUE_OUT_OF_RANGE_RC
Impedance calibration zcal_p value out of range
IO_DCCAL_ZCAL_K2_EXCEEDED_RC
Post cursor drive ratio has exceeded 0.25
IO_DCCAL_ZCAL_M_EXCEEDED_RC
Margin Ratio has exceeded 100 percentage
IO_DCCAL_ZCAL_M_LOW_RC
Margin Ratio is less than 50 percent
IO_CLEAR_FIRS_INVALID_INVOCATION_RC
io clear firs hwp invoked with wrong pair of targets
IO_FIR_LANE_RX_PARITY_ERROR_RC
io lane level rx parity error set
CHIP_TARGET
LANE_ID
RX_ERROR_REG
IO_FIR_GROUP_RX_PARITY_ERROR_RC
io group level rx parity error set
CHIP_TARGET
RX_ERROR_REG
IO_FIR_BUS_RX_PARITY_ERROR_RC
io bus level rx parity error set
CHIP_TARGET
RX_ERROR_REG
IO_FIR_LANE_TX_PARITY_ERROR_RC
io lane level tx parity error set
CHIP_TARGET
LANE_ID
TX_ERROR_REG
IO_FIR_GROUP_TX_PARITY_ERROR_RC
io group level tx parity error set
CHIP_TARGET
TX_ERROR_REG
IO_FIR_SPARES_DEPLOYED_FIR_RC
A spare has been deployed
CHIP_TARGET
SPARE_ERROR_REG
IO_FIR_MAX_SPARES_EXCEEDED_FIR_RC
maximum spares possible to deploy exceeded
CHIP_TARGET
SPARE_ERROR_REG
IO_FIR_GCR_HANG_ERROR_RC
gcr hang error detected
CHIP_TARGET
IO_FIR_RECALIBRATION_ERROR_RC
recalibration or a repair error has been detected
CHIP_TARGET
RECAL_ERROR_REG
IO_FIR_TOO_MANY_BUS_ERROR_RC
A bus has experienced too many random lane errors
CHIP_TARGET
BUS_ERROR_REG