/* IBM_PROLOG_BEGIN_TAG */ /* This is an automatically generated prolog. */ /* */ /* $Source: src/usr/hdat/hdatmsvpd.H $ */ /* */ /* OpenPOWER HostBoot Project */ /* */ /* Contributors Listed Below - COPYRIGHT 2016,2019 */ /* [+] International Business Machines Corp. */ /* */ /* */ /* Licensed under the Apache License, Version 2.0 (the "License"); */ /* you may not use this file except in compliance with the License. */ /* You may obtain a copy of the License at */ /* */ /* http://www.apache.org/licenses/LICENSE-2.0 */ /* */ /* Unless required by applicable law or agreed to in writing, software */ /* distributed under the License is distributed on an "AS IS" BASIS, */ /* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or */ /* implied. See the License for the specific language governing */ /* permissions and limitations under the License. */ /* */ /* IBM_PROLOG_END_TAG */ #ifndef HDATMSVPD_H #define HDATMSVPD_H /** * @file hdatmsvpd.H * * @brief This file contains the class definition for the main store * VPD object. * */ /*----------------------------------------------------------------------------*/ /* Includes */ /*----------------------------------------------------------------------------*/ #include // standard types #include // HDAT header type definitions #include "hdathdif.H" // HdatHdif base class definition #include "hdatmsarea.H" // HdatMsArea class definition #include // ErrlEntry class #include #include "hdatutil.H" namespace HDAT { /*----------------------------------------------------------------------------*/ /* Constants */ /*----------------------------------------------------------------------------*/ /** @brief eye catcher for the HDIF header for the mainstore VPD data area */ const char HDAT_MSVPD_STRUCT_NAME[] = "MS VPD"; const uint32_t HDAT_NO_MEMORY = 0; const uint32_t HDAT_MIN_NUM_FOR_SHARING = 2; const uint32_t HDAT_BITS_PER_BYTE = 8; const uint32_t HDAT_MB_PER_GB = 1024; const uint32_t MAX_CHIP_EC_CNT_PER_MSAREA = 2; const uint32_t HDAT_START_INSTANCE = 0; const uint32_t HDAT_RHB_MAX_RANGE_ENTRIES = 20; const uint32_t MAX_DIMMS_PER_MCBIST = 8; //@TODO:RTC 213230(HDAT Axone additional support) //Need to revisit the number if needed const uint32_t HDAT_MAX_MSAREA_AXONE = 32; /** @brief Structure version number */ const uint16_t HDAT_MS_VPD_VERSION = 0x24; /** @enum hdatDataPtrs * Constants for the internal data pointers that are added to the base class */ enum hdatMsVpdDataPtrs { HDAT_MS_VPD_MAX_ADDR = 0, HDAT_MS_VPD_MAX_SIZE = 1, HDAT_MS_VPD_PAGE_MOVER = 2, HDAT_MS_VPD_IMT_ADDR_RNG = 3, HDAT_MS_VPD_UE_ADDR_RNG = 4, HDAT_MS_VPD_HB_ADDR_RNG = 5, HDAT_MS_VPD_LAST = 6 }; /** @enum hdatChildPtrs * Constants for the child structure pointers that are added to the base * class */ enum hdatMsVpdChildPtrs { HDAT_MS_AREAS = 0, HDAT_MS_CHILD_RESERVED1 = 1, HDAT_MS_CHILD_LAST = 2 }; /*----------------------------------------------------------------------------*/ /* Typedefs */ /*----------------------------------------------------------------------------*/ /** * @brief structure for RAM AREA Information * */ struct hdatRamArea { uint32_t ivHuid; bool ivFunctional; uint32_t ivSize; uint32_t ivfruId; hdatRamArea(uint32_t i_huid, bool status, uint32_t dimmSize,uint32_t i_fruId) : ivHuid(i_huid), ivFunctional(status), ivSize(dimmSize), ivfruId(i_fruId) { } }; /** @brief Main store address information */ struct hdatMsVpdAddr_t { hdatMsAddr_t hdatMaxAddr; // 0x0000 Maximum configured mainstore address hdatMsAddr_t hdatMaxCcmAddr; // 0x0008 Maximum mainstore address that could // be configured if memory is added with // concurrent maintenance uint32_t hdatMstSigAffntyDom; // 0x0010 The affinity domain considered //most important when making affinity decisions hdatMsAddr_t hdatMirrMemStartAddr;//0x0014 Mirrorable MemoryStarting Address hdatMsAddr_t hdatHRMORstashLoc; //0x001C address to HRMOR stash location in HB reserved memory } __attribute__ ((packed)); /** @brief Main store size information */ struct hdatMsVpdSize_t { uint32_t hdatReserved1; // 0x0000 reserved to make hdatTotSize 8 bytes // in future uint32_t hdatTotSize; // 0x0004 Total configured mainstore size in // mega-bytes } __attribute__ ((packed)); /** @brief Page mover information */ struct hdatMsVpdPageMover_t { uint32_t hdatFlags; // 0x0000 Flags uint32_t hdatLockCnt; // 0x0004 Count of hardware locks per page hdatMsAddr_t hdatLockAddr; // 0x0008 Hardware lock address hdatMsAddr_t hdatMoverAddr; // 0x0010 Page mover address hdatMsAddr_t hdatBSRAddr; // 0x0018 Barrier sync register address hdatMsAddr_t hdatXSCOMAddr; // 0x0020 address of XSCOM address range } __attribute__ ((packed)); /** @brief In Memory Trace address range array element information */ struct hdatMsVpdImtAddrRange_t { hdatMsAddr_t hdatImtAddrRngStrAddr; // 0x0000 Range starting address hdatMsAddr_t hdatImtAddrRngEndAddr; // 0x0008 Range ending address+1 } __attribute__ ((packed)); /** @brief In UE address range array element information - added for bi01 */ struct hdatMsVpdUEAddrRange_t { hdatMsAddr_t hdatUEAddr; // 0x0000 UE area starting address } __attribute__ ((packed)); /** @brief In Reserved Hostboot Memory iaddress range array element information */ struct hdatMsVpdRhbAddrRange_t { uint32_t hdatRhbRngType:8; // 0x0000 Range type uint32_t hdatRhbRngId:24; // 0x0001 Range ID hdatMsAddr_t hdatRhbAddrRngStrAddr; // 0x0004 Range starting // address hdatMsAddr_t hdatRhbAddrRngEndAddr; // 0x000C Range ending // address+1 uint32_t hdatRhbLabelSize; // 0x0014 Label size uint8_t hdatRhbLabelString[64]; // 0x0018 Label string Ptr hdatRhbPermType hdatRhbPermission; // 0x0058 R/W Permissions uint8_t reserved[7]; // 0x0059 Reserved } __attribute__ ((packed)); /** @brief Reserved HB length */ const uint16_t HDAT_MS_RHB_LABEL_LEN = sizeof(hdatMsVpdRhbAddrRange_t::hdatRhbLabelString); struct hdatMsVpd_t { hdatMsVpdAddr_t hdatMsAddr; hdatMsVpdSize_t hdatMsSize; hdatMsVpdPageMover_t hdatPageMover; hdatMsVpdImtAddrRange_t hdatImtAddrRange; hdatMsVpdUEAddrRange_t hdatUEAddrRange; hdatMsVpdRhbAddrRange_t hdatRhbAddrRange; }__attribute__ ((packed)); /*----------------------------------------------------------------------------*/ /* Constants */ /*----------------------------------------------------------------------------*/ /* @enum hdatMsAreaStatus * Status of an MS area. */ enum hdatMsAreaStatus { HDAT_MEM_INSTALLED = 0x8000, // DIMMs are installed HDAT_MEM_FUNCTIONAL = 0x4000, // DIMMs are functional HDAT_MEM_SHARED = 0x2000 // Memory is shared }; /* @enum hdatRamStatus * Status of a RAM FRU. */ enum hdatRamStatus { HDAT_RAM_NOT_INSTALLED = 0x0000, // RAM is NOT installed HDAT_RAM_INSTALLED = 0x8000, // RAM is installed HDAT_RAM_FUNCTIONAL = 0x4000 // RAM is functional }; /* @enum hdatMemParentType * */ enum hdatMemParentType { HDAT_MEM_PARENT_RISER = 0x8000, // RISER card HDAT_MEM_PARENT_MEMCARD = 0x4000, // Memory card HDAT_MEM_PARENT_CEC_FRU = 0x2000, // Other CEC FRU HDAT_MEM_PARENT_HYB_RISER = 0x1000, // Hybrid RISER card }; /* @enum hdatBsrMode * */ enum hdatBsrMode { HDAT_BSR_16_BYTE = 0x00000000, // 16 byte BSR mode HDAT_BSR_64_BYTE = 0x02000000, // 64 byte BSR mode HDAT_BSR_128_BYTE = 0x04000000, // 128 byte BSR mode // P7 values HDAT_BSR_1M_BYTE = 0x00000000, // 1MB BSR mode HDAT_BSR_2M_BYTE = 0x02000000, // 2MB BSR mode HDAT_BSR_4M_BYTE = 0x04000000, // 4MB BSR mode HDAT_BSR_8M_BYTE = 0x06000000 // 8MB BSR mode }; /*----------------------------------------------------------------------------*/ /* C++ class definition */ /*----------------------------------------------------------------------------*/ /** Begin Class Description * * @brief The HdatMsVpd class is used to construct a main store VPD object. * * Description: This class defines a specialized object. It is not intended * that any component can create an object of this type. * In particular,the object is built only in the CEC Server process * when requested by the hdat component. And only 1 HdatMsVpd * object can be built.These restrictions are not checked or * enforced by HDAT. * * The real purpose of the object is to create the main store * VPD structure as defined by the PHYP Initialization * architecture. This data structure is eventually DMA'd to * main memory. The class is not defined to be a general purpose * interface for building this object by anyone other than the * CEC Server process. * * Contained within the mainstore VPD object are mainstore area * objects and RAM objects. * * Thread safety: An HdatMsVpd object is not thread safe. That is, a single * object cannot be shared and used concurrently by multiple * threads at the same time. In fact, an object interface is * used only as a better way to built a flat structure to DMA * to main memory. * * Signal handler usage: This class is not intended to be used in a signal * handler and nothing has been done to try and make it safe * to use in a signal handler. * * End Class Description */ class HdatMsVpd : public HdatHdif { public: /** * @brief Construct an HdatMsVpd object. * * This is the constructor for the HdatMsVpd object. * * If you are constructing this object on the heap by using new, then * you must check the pointer returned from new to see if it is null. * If it is null, new failed to allocate storage and the constructor * was not called. If it is not null, then you must check o_errlHndl * to see if the constructor ran successfully. If o_errlHndl indicates * an error was reported by the constructor, new has already allocated * heap storage and the object must be deleted in order to free the * heap storage. * * @pre None * * @post An HdatMsVpd object has been constructed.Heap storage has been * allocated. * * @param[out] o_errlHndl - If any errors occur, the HdatMsVpd object * is NOT constructed and errors are returned in * this parameter * @param[in] i_msAddr - The main memory address that the main * store VPD structure will be DMA'd to. * * @return A null error log handle if successful, else the return code * pointed to by o_errlHndl. * */ HdatMsVpd(errlHndl_t &o_errlHndl,const hdatMsAddr_t &i_msAddr); /** * @brief HdatMsVpd object destructor * * This is the destructor for an HdatMsVpd object. Any heap storage * allocated for the object is dallocated. * * @pre No preconditions exist * * @post The HdatMsVpd object has been destroyed and can no longer be * used. * */ virtual ~HdatMsVpd(); /** * @brief Update the mainstore VPD to specify a memory address range for * the In Memory Trace tool. More than one address range can be added. * * @post An address range entry has been added. * * @param[in] i_start - The starting address of the range * @param[in] i_end - The ending address of the range + 1 * * @return A null error log handle if successful, else the return code * pointed to by o_errlHndl contains one of: * * @retval HDAT_ARRAY_ERROR */ errlHndl_t addIMTAddrRange(hdatMsAddr_t &i_start, hdatMsAddr_t &i_end); /** * @brief Update the mainstore VPD to specify a memory address range for * UE areas. More than one address range can be added. Added for * bi01. * * @post An address range entry has been added. * * @param[in] i_addr - The starting address of the range * * @return A null error log handle if successful, else the return code * pointed to by o_errlHndl contains one of: * * @retval HDAT_ARRAY_ERROR */ errlHndl_t addUEAddrRange(hdatMsAddr_t &i_addr); /** * @brief Update the mainstore VPD to specify a memory address range for * host boot reserver. * * @post An address range entry has been added. * * @param[in] i_dbobId - DBOB ID * @param[in] i_start - The starting address of the range * @param[in] i_end - The end address of the range * @param[in] i_labelSize - RHB Label Size * @param[in] i_labelStringPtr - RHB Label String * @param[in] i_permission - R/W permissions for RHB. * * @return A null error log handle if successful, else the return code * pointed to by o_errlHndl contains one of: * * @retval HDAT_ARRAY_ERROR */ errlHndl_t addRHBAddrRange( uint32_t i_dbob_id, hdatMsAddr_t &i_start, hdatMsAddr_t &i_end, uint32_t i_labelSize, uint8_t* &i_labelStringPtr, hdatRhbPermType i_permission = HDAT::RHB_READ_WRITE); /** * @brief Update the mainstore VPD with Barrier Synchronization Register * information * * Note: If the Barrier Synchronization Register is NOT enabled, this * method does not have to be called. * * @pre None * * @post None * * @param[in] i_bsrAddr - Address of memory mapped BSR * @param[in] i_bsrMode - Mode the BSR is initialized to */ void setBSR(const hdatMsAddr_t &i_bsrAddr, hdatBsrMode i_bsrMode = HDAT_BSR_128_BYTE); /** * @brief Update the mainstore VPD with address of XSCOM * * Note: If the XSCOM address is NOT supported, this * method does not have to be called. * * @pre None * * @post None * * @param[in] i_xscomAddr - Address of XSCOM address range */ void setXSCOM(const hdatMsAddr_t &i_xscomAddr); /** * @brief Add a main store area FRU. * * Each main store area FRU which contains memory must be added to the * HdatMsVpd object. This method adds information about the FRU. * * @pre One cannot add any more mainstore area FRUs than was specified * by the i_msAreaCnt parameter on the HdatMsVpd constructor. * * @post A main store area FRU has been added to the object. * Heap storage has been allocated. * * @param[in] i_resourceId - The FRU's resource id * @param[in] i_msAreaId - A unique id for each main store area * associated with a mainstore VPD object. The id starts at * 0 and is incremented by 1 for each new * mainstore area. * @param[in] i_ramCnt - The number of RAM objects that will be * added to the mainstore area. If an exact count * cannot be computed, a maximum number can be * provided. * @param[in] i_chipEcCnt - The number of EC entries that will be * added to the mainstore area. If an exact count cannot be * computed, a maximum number can be provided. * @param[in] i_addrRngCnt - The number of address range entries that * will be added to the mainstore area. If an * exact count cannot be computed, a maximum * number can be provided. * * @return A null error log handle if successful, else the return code * pointed to by errlHndl_t contains one of: * * @retval HDAT_ALLOC_ERROR * @retval HDAT_ARRAY_ERROR */ errlHndl_t addMsAreaFru(uint32_t i_resourceId, uint32_t i_slcaIndex, TARGETING::Target * i_target, uint16_t i_msAreaId, uint32_t i_ramCnt, uint32_t i_chipEcCnt, uint32_t i_addrRngCnt); /** * @brief Update the mainstore area to specify the type of memory. * * @pre The i_msAreaId parameter must be for a valid mainstore area that * was added with the addMsAreaFru() method. HDAT does not check or * enforce that this is a valid main store area ID. * * @post None * * @param[in] i_msAreaId - A unique id for each main store area * associated with a mainstore VPD object. The id * identifies the mainstore area that is to be * updated. * @param[in] i_type - This specifies the type of memory card * for this mainstore area. */ void setMsAreaType(uint16_t i_msAreaId, hdatMemParentType i_type); /** * @brief Update the mainstore area to specify the status of the memory * DIMMS * * @pre The i_msAreaId parameter must be for a valid mainstore area that * was added with the addMsAreaFru() method.HDAT does not check or * enforce that this is a valid main store area ID. * * @post None * * @param[in] i_msAreaId - A unique id for each main store area * associated with a mainstore VPD object. The id * identifies the mainstore area that is to be updated. * @param[in] i_status - See the hdatMsAreaStatus enum. The value * specified here can be a bitwise OR of the enum * values. */ void setMsAreaStat(uint16_t i_msAreaId, uint16_t i_status); /** * @brief Update the mainstore area with an id for interleaved memory * * @pre The i_msAreaId parameter must be for a valid mainstore area that * was added with the addMsAreaFru() method.HDAT does not check or * enforce that this is a valid main store area ID. * * @post None * * @param[in] i_msAreaId - A unique id for each main store area * associated with a mainstore VPD object. The id * identifies the mainstore area that is to be updated * @param[in] i_id - An identifier from 0 to N which is the same * for each MS area which is interleaved. In * addition, the HDAT_MEM_SHARED status attribute * must have been used for this * MS area when setMsAreaStat() was called. */ void setMsAreaInterleavedId(uint16_t i_msAreaId, uint16_t i_id); /** * @brief Update the mainstore area to specify the total size of the * mainstore area. * * @pre The i_msAreaId parameter must be for a valid mainstore area that * was added with the addMsAreaFru() method. HDAT does not check or * enforce that this is a valid main store area ID. * * @post None * * @param[in] i_msAreaId - A unique id for each main store area * associated with a mainstore VPD object. The id * identifies the mainstore area that is to be * updated. * @param[in] i_size - The total size of the configured mainstore * area in megabytes. It is the (high address of * the mainstore area + 1 minus the low address of * the mainstore area) divided by 1 megabyte. */ void setMsAreaSize(uint16_t i_msAreaId, uint32_t i_size); /** * @brief Update the mainstore area to specify associated processor id * * @pre The i_msAreaId parameter must be for a valid mainstore area that * was added with the addMsAreaFru() method. HDAT does not check or * enforce that this is a valid main store area ID. * * @post None * * @param[in] i_msAreaId - A unique id for each main store area * associated with a mainstore VPD object. * The id identifies the mainstore area that is * to be updated. * @param[in] i_moduleId - The Module Id of the processor * associated with this mainstore area. */ void setMsAreaModuleId(uint16_t i_msAreaId, uint32_t i_moduleId); /** * @brief Update the mainstore area to specify the affinity domain * * @pre The i_msAreaId parameter must be for a valid mainstore area that * was added with the addMsAreaFru() method. HDAT does not check or * enforce that this is a valid main store area ID. * * @post None * * @param[in] i_msAreaId - A unique id for each main store area * associated with a mainstore VPD object. * The id identifies the mainstore area that is * to be updated. * @param[in] i_affinityDomain - The affinity domain * associated with this mainstore area. */ void setMsAreaAffinityDomain(uint16_t i_msAreaId, uint32_t i_affinityDomain); /** * @brief Update the mainstore area to specify the memory address range * More than one address range can be added. * * @pre The i_msAreaId parameter must be for a valid mainstore area that * was added with the addMsAreaFru() method. HDAT does not check or * enforce that this is a valid main store area ID. * * @post None * * @param[in] i_msAreaId - A unique id for each main store area * associated with a mainstore VPD object. The id * identifies the mainstore area that is to be * updated. * @param[in] i_start - The starting address of the range * @param[in] i_end - The ending address of the range + 1 * @param[in] i_procChipId - which is the chip id of the physical * processor * @param[in] i_rangeIsMirrorable - Specifies whether the range is * mirrorable * @param[in] i_mirroringAlgorithm - Specifies hardware mirroring * algorithm to use * @param[in] i_startMirrAddr - Specifies the starting mirrorable * address for range * @param[in] i_hdatMemCntlID - Memory Controller ID * * @return A null error log handle if successful, else the return code * pointed to by errlHndl_t contains one of: * * @retval HDAT_ARRAY_ERROR */ errlHndl_t addMsAreaAddr(uint16_t i_msAreaId, hdatMsAddr_t &i_start, hdatMsAddr_t &i_end, uint32_t i_procChipId, bool i_rangeIsMirrorable = false, uint8_t i_mirroringAlgorithm = 0, uint64_t i_startMirrAddr = 0, uint32_t i_hdatMemCntlID = 0); /** * @brief Add engineering change information for memory interface chips * * @pre The first EC entry added must be for the memory controller. * HDAT has no way of validating or enforcing this so it is up to the * user of the method to do this correctly. * * The i_msAreaId parameter must be for a valid mainstore area that * was added with the addMsAreaFru() method.HDAT does not check or * enforce that this is a valid main store area ID. * * @post One cannot add any more engineering change entries than was * specified by the i_chipEcCnt parameter on the addMsAreaFru method. * * @param[in] i_msAreaId -A unique id for each main store area * associated with a mainstore VPD object. The id * identifies the mainstore area that is to be * updated. * @param[in] i_manfId - Chip's manufacturing id * @param[in] i_ecLvl - Chip's engineering change level * * @return A null error log handle if successful, else the return code * pointed to by errlHndl_t contains one of: * * @retval HDAT_ARRAY_ERROR */ errlHndl_t addEcEntry(uint16_t i_msAreaId, uint32_t i_manfId, uint32_t i_ecLvl); /** * @brief Update the mainstore area to specify the host I2C device info * * @pre The i_msAreaId parameter must be for a valid mainstore area that * was added with the addMsAreaFru() method. HDAT does not check * or enforce that this is a valid main store area ID. * * @post None * * @param i_msAreaId - input parameter - A unique id for each main * store area associated with a mainstore VPD * object. The id identifies the mainstore area * that is to be updated. * @param i_I2cDevEntries- input parameter - host I2c device info */ void setMsaI2cInfo(uint16_t i_msAreaId, std::vector& i_I2cDevEntries); /** * @brief Add a RAM area FRU. * * After a mainstore area has been added to the mainstore VBPD object, * one or more RAM FRUs must be added to the mainstore area. * * @pre A mainstore area must have been previously created so this RAM * area can be added to it. * * The i_msAreaId parameter must be for a valid mainstore area that * was added with the addMsAreaFru() method. HDAT does not check * or enforce that this is a valid main store area ID. * * @post A RAM card's VPD definiton has been added to the object. Heap * storage has been allocated. * * @param[in] i_msAreaId - The id of the mainstore area this * RAM is associated with * @param[in] i_resourceId - VPD resource ID for the RAM FRU. * @param[in] i_slcaIndex - SLCA index of ms area * @param[in] i_ramId - RAM area identifier; a number from 0 to N * @param[in] i_status - staus of the DIMMS and is the bitwise OR of * values from hdatRamStatus defined above * @param[in] i_size -the total size of configured mainstore in this * RAM area * @param[in] i_dimmId - Dimm ID with bit positions signifying the target * positions in the affinity path * @param[in] i_dimmCurFreq - Current operating dimm frequency * * @return A null error log handle if successful, else the return code * pointed to by errlHndl_t contains one of: * * @retval HDAT_ALLOC_ERROR * @retval HDAT_ARRAY_ERROR */ errlHndl_t addRamFru(uint16_t i_msAreaId, TARGETING::Target * i_target, uint32_t i_resourceId, uint32_t i_slcaIndex, uint16_t i_ramId, uint16_t i_status, uint32_t i_size, uint32_t i_dimmId, uint32_t i_dimmCurFreq); /** * @brief Initialization of HdatMsVpd object. * * If you are constructing this object on the heap by using new, then * you must check the pointer returned from new to see if it is null. * If it is null, new failed to allocate storage and the constructor * was not called. If it is not null, then you must check o_errlHndl * to see if the constructor ran successfully. If o_errlHndl indicates * an error was reported by the constructor, new has already allocated * heap storage and the object must be deleted in order to free the * heap storage. * * @pre None * * @post An HdatMsVpd object has been initialized. Heap storage has * been allocated. * * @param[in] i_maxMsAddr - maximum configured main store address * @param[in] i_maxMsCcmAddr - maximum main store address that could be * configured if memory was added with * concurrent maintenance.If concurrent * maintenance cannot be performed on this * machine,this parameter has the same value as * i_maxMsAddr. * @param[in] i_msSize - total size of configured main store in * mega-bytes. (number of mega-bytes from lowest * main store address to highest main store * address minus the number of mega-bytes of a * ddress holes) * @param[in] i_msAreaCnt The count of the number of main store areas * that will be defined by using the * addMsAreaFru() method below.If the actual * count cannot be derived when this object is * constructed, a maximum count can be supplied. * @param[in] i_MostSigAffinityDomain -most significant affinity domain. * The affinity domain considered most important * when making affinity decisions. The value is * model dependent. * @param[in] i_ueAreaCnt - Maximum number of UE Address ranges * @param[in] i_MirrMemStartAddr - The address of the start of * mirrorable memory * */ void hdatInit(hdatMsAddr_t &i_maxMsAddr, hdatMsAddr_t &i_maxMsCcmAddr, uint32_t i_msSize, uint32_t i_msAreaCnt, uint32_t i_MostSigAffinityDomain, uint32_t i_ueAreaCnt, uint64_t i_MirrMemStartAddr); /** * @brief Gather MS data for HDAT * @par Description: * This function collects various MS attributes and fills MS Data area * * @param[in] o_size - total size written * @param[in] o_count - total count of ms vpd instance * * @return A null error log handle if successful, else the return code * pointed to by o_errlHndl contains one of: * * @retval HDAT_ARRAY_ERROR */ errlHndl_t hdatLoadMsData(uint32_t &o_size, uint32_t &o_count); /** * @brief Gets maximum configured memory address * * @param[in] i_model Target model * * @return value of ms address */ uint64_t hdatGetMaxMemConfiguredAddress( TARGETING::ATTR_MODEL_type i_model); /** * @brief Fetches the group of MC * * @param[in] i_pTarget Proc target * @param[in] i_pMcsTarget MCS target * @param[out] o_groupOfMc MC group value * * @return Success or failure */ bool hdatFindGroupForMc(const TARGETING::Target *i_pProcTarget, const TARGETING::Target *i_pMcsTarget, uint32_t& o_groupOfMc); /** * @brief Fetches the group of MCC * * @param[in] i_pTarget Proc target * @param[in] i_pMccTarget MCC target * @param[out] o_groupOfMcc MCC group value * * @return Success or failure */ bool hdatFindGroupForMcc(const TARGETING::Target *i_pProcTarget, const TARGETING::Target *i_pMccTarget, uint32_t& o_groupOfMcc); /** * @brief Get the DIMMS list present on the system * * @param[in] i_pTarget Mca target * @param[in] i_pMcsTarget Mcs target * @param[in] i_membufFruid - membuf fruid decides the parent type * @param[out] o_areas list of ram area structure based on the DIMM * present. * @param[out] o_areaSize - Total DIMM size * @param[out] o_dimmNum - Total DIMM number * @param[out] o_areaFunctional - DIMM functional status * @param[out] o_parentType - memory parent type based on whether * the dimms are pluggable or soldered * * @return A null error log handle if successful, else the return the * error handle */ errlHndl_t hdatScanDimms(const TARGETING::Target *i_pTarget, const TARGETING::Target *i_pMcsTarget, uint32_t i_membufFruid, std::list& o_areas, uint32_t& o_areaSize, uint32_t& o_dimmNum, bool& o_areaFunctional, hdatMemParentType& i_parentType); /** * @brief Get the DIMMS list present on the axone system * * @param[in] i_pTarget OCMB Chip target * @param[out] o_areas list of ram area structure based on the DIMM * present. * @param[out] o_areaSize - Total DIMM size * @param[out] o_dimmNum - Total DIMM number * @param[out] o_areaFunctional - DIMM functional status * @param[out] o_parentType - memory parent type based on whether * the dimms are pluggable or soldered * * @return A null error log handle if successful, else the return the * error handle */ errlHndl_t hdatScanDimmsAxone(const TARGETING::Target *i_pOcmbTarget, std::list& o_areas, uint32_t& o_areaSize, uint32_t& o_dimmNum, bool& o_areaFunctional, hdatMemParentType& i_parentType); /** * @brief Get max memory blocks connected to membuf * * @param[in] i_pTarget Mcs target * @param[out] o_maxMemoryBlocks - max memory block value * * @return A null error log handle if successful, else the return the * error handle */ errlHndl_t hdatGetMaxMemoryBlocks(const TARGETING::Target *i_pTarget, uint32_t &o_maxMemoryBlocks); /** * @brief Write the data to Mainstore area space * * @param[in] i_addr - MS address * @param[in] i_size - total size to be written * */ void commit(void * i_addr,uint32_t i_size); /** * @brief Get total size of MS data to be written * * @param[out] o_size - total size value * */ void getTotalSize(uint32_t &o_size); /** * @brief Print an HdatMsVpd object. * * This method is a debug mthod which prints out a mainstore VPD object. * * @pre None * * @post None * */ void prt(); protected: /** * @brief After all MS area objects have been created, this routine must * be called to see if they are all the same size.If they are not, the * smaller one(s) will be adjusted with padding so they are all * the same size. * * This is required because PHYP traverses through the MS areas * as entries in an array. * * @pre All MS area objects must have been created * * @post Some objects' size may be adjusted * */ void adjustMsAreaObjects(); private: /** Object Instance Data * * @li iv_msAddr - main memory address the final data structure is * DMA'd to * @li iv_actMsAreaCnt - actual count of main store areas that are added * @li iv_maxMsAreaCnt - maximum count of main store areas that can be * added * @li iv_maxAddr - maximum main store addresses * @li iv_maxSize - maximum main store size * @li iv_mover - page mover information * @li iv_msAreaPtrs - ptr to one or more ptrs which in turn point to * HdatMsArea objects * @li iv_IMTaddrRngArrayHdr - In memory trace address range header * @li iv_IMTaddrRangeArray - In memory trace address range array * @li iv_UEaddrRngArrayHdr - UE address range header * @li iv_UEaddrRangeArray - UE address range array * @li iv_maxUEAddrRngCnt - Max UE address range count * @li iv_RHBaddrRngArrayHdr - Reserved host boot address range header * @li iv_RHBaddrRangeArray - Reserved host boot address range array * @li iv_maxRHBAddrRngCnt - Max RHB address range count * @li iv_virtAddr - virtual address */ hdatMsAddr_t iv_msAddr; uint32_t iv_actMsAreaCnt; uint32_t iv_maxMsAreaCnt; hdatMsVpdAddr_t iv_maxAddr; hdatMsVpdSize_t iv_maxSize; hdatMsVpdPageMover_t iv_mover; HdatMsArea **iv_msAreaPtrs; hdatHDIFDataArray_t iv_IMTaddrRngArrayHdr; hdatMsVpdImtAddrRange_t *iv_IMTaddrRangeArray; uint32_t iv_maxIMTAddrRngCnt; hdatHDIFDataArray_t iv_UEaddrRngArrayHdr; hdatMsVpdUEAddrRange_t *iv_UEaddrRangeArray; uint32_t iv_maxUEAddrRngCnt; hdatHDIFDataArray_t iv_RHBaddrRngArrayHdr; hdatMsVpdRhbAddrRange_t *iv_RHBaddrRangeArray; uint32_t iv_maxRHBAddrRngCnt; void *iv_virtAddr; /** Class (static) Data * * Only one copy of this data exists in a process. * * @li cv_actualCnt - a count of how many HdatMsVpd objects are created */ static uint32_t cv_actualCnt; }; // end of HdatMsVpd class } #endif // HDATMSVPD_H