/* IBM_PROLOG_BEGIN_TAG */ /* This is an automatically generated prolog. */ /* */ /* $Source: src/usr/fapi2/attribute_service.C $ */ /* */ /* OpenPOWER HostBoot Project */ /* */ /* Contributors Listed Below - COPYRIGHT 2015,2018 */ /* [+] International Business Machines Corp. */ /* */ /* */ /* Licensed under the Apache License, Version 2.0 (the "License"); */ /* you may not use this file except in compliance with the License. */ /* You may obtain a copy of the License at */ /* */ /* http://www.apache.org/licenses/LICENSE-2.0 */ /* */ /* Unless required by applicable law or agreed to in writing, software */ /* distributed under the License is distributed on an "AS IS" BASIS, */ /* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or */ /* implied. See the License for the specific language governing */ /* permissions and limitations under the License. */ /* */ /* IBM_PROLOG_END_TAG */ /// /// @file attribute_service.C /// /// @brief Implements the platform functions that access attributes for FAPI2 /// //****************************************************************************** // Includes //****************************************************************************** // The following file checks at compile time that all HWPF attributes are // handled by Hostboot. This is done to ensure that the HTML file listing // supported HWPF attributes lists attributes handled by Hostboot #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include <../memory/lib/shared/dimmConsts.H> #include <../memory/lib/shared/mss_const.H> #include <../memory/lib/rosetta_map/rosetta_map.H> #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include //****************************************************************************** // Implementation //****************************************************************************** namespace fapi2 { namespace platAttrSvc { /// /// @brief Gets the TARGETING object for the input FAPI target /// See doxygen in attribute_service.H /// errlHndl_t getTargetingTarget(const Target& i_pFapiTarget, TARGETING::Target* & o_pTarget, const TARGETING::TYPE i_expectedType) { errlHndl_t l_errl = NULL; do { if (i_pFapiTarget.get() == NULL) { // Fapi Target object isnt point to a real target FAPI_ERR("getTargetingTarget. NULL Fapi Target"); /*@ * @errortype * @moduleid fapi2::MOD_FAPI2_GET_TARGETING_TARGET * @reasoncode RC_NULL_FAPI_TARGET * @userdata1[0:31] Fapi2 Expected Type * @userdata1[32:63] * @userdata2[0:7] Is Chip * @userdata2[8:15] Is Chiplet * @userdata2[16:63] * @devdesc Unable to resolve FapiTarget from input * @custdesc Firmware Error */ l_errl = new ERRORLOG::ErrlEntry(ERRORLOG::ERRL_SEV_UNRECOVERABLE, MOD_FAPI2_GET_TARGETING_TARGET, RC_NULL_FAPI_TARGET, i_expectedType, TWO_UINT8_TO_UINT16( i_pFapiTarget.isChip(), i_pFapiTarget.isChiplet())); l_errl->collectTrace(FAPI_TRACE_NAME); l_errl->collectTrace(FAPI_IMP_TRACE_NAME); break; } o_pTarget = reinterpret_cast(i_pFapiTarget.get()); if(i_expectedType != TARGETING::TYPE_NA) { TARGETING::TYPE l_type = o_pTarget->getAttr(); if (l_type != i_expectedType) { FAPI_ERR("getTargetingTarget. Type: %d, expected %d", l_type, i_expectedType); /*@ * @errortype * @moduleid fapi2::MOD_FAPI2_GET_TARGETING_TARGET * @reasoncode RC_MISMATCHED_FAPI_TARG_TARGET * @userdata1[0:31] Actual Type * @userdata1[32:63] Expected Type * @userdata2[0:31] Initial FAPI2 Type * @userdata2[32:47] Is Chip * @userdata2[48:63] Is Chiplet * @devdesc When coverting from FAPI2::target to * Targeting::target the resulting Targeting::target's was incorrect * @custdesc Firmware Error */ l_errl = new ERRORLOG::ErrlEntry(ERRORLOG::ERRL_SEV_UNRECOVERABLE, MOD_FAPI2_GET_TARGETING_TARGET, RC_MISMATCHED_FAPI_TARG_TARGET, TWO_UINT32_TO_UINT64(l_type, i_expectedType), TWO_UINT32_TO_UINT64( i_pFapiTarget.getType(), TWO_UINT16_TO_UINT32( i_pFapiTarget.isChip(), i_pFapiTarget.isChiplet()))); l_errl->collectTrace(FAPI_TRACE_NAME); l_errl->collectTrace(FAPI_IMP_TRACE_NAME); break; } } } while(0); return l_errl; } bool getTargetingAttrHelper(TARGETING::Target * l_pTargTarget, const TARGETING::ATTRIBUTE_ID i_targAttrId, const uint32_t i_attrSize, void * o_pAttr) { return l_pTargTarget->_tryGetAttr(i_targAttrId, i_attrSize, o_pAttr); } /// /// @brief Gets a Targeting attribute, this is called by the macro that maps a /// FAPI Attribute get to a TARGETING attribute and should not be called /// directly. /// See doxygen in H file. /// ReturnCode getTargetingAttr( const Target< TARGET_TYPE_ALL, plat_target_handle_t >& i_pFapiTarget, const TARGETING::ATTRIBUTE_ID i_targAttrId, const uint32_t i_attrSize, void * o_pAttr) { errlHndl_t l_errl = NULL; ReturnCode l_rc; TARGETING::Target * l_pTargTarget = NULL; l_errl = getTargetingTarget(i_pFapiTarget, l_pTargTarget); if (l_errl) { FAPI_ERR("getTargetingAttr: Error from getTargetingTarget"); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { // Note directly calling Target's private _tryGetAttr function for code // size optimization, the public function is a template function that // cannot be called with a variable attribute ID, the template function // checks at compile time that the Targeting attribute is readable, but // that is already checked by the Targeting compiler bool l_success = getTargetingAttrHelper(l_pTargTarget, i_targAttrId, i_attrSize, o_pAttr); if (!l_success) { FAPI_ERR("getTargetingAttr: Error from getTargetingAttrHelper " "for target 0x%.8X and attribute 0x%x", TARGETING::get_huid(l_pTargTarget), i_targAttrId); /*@ * @errortype * @moduleid fapi2::MOD_FAPI2_GET_TARGETING_ATTR * @reasoncode RC_INVALID_ATTRIBUTE * @userdata1[0:31] FAPI2 Target Type * @userdata1[32:63] HB Target HUID * @userdata2 Requested attribute ID * @devdesc Invalid attribute read request * @custdesc Firmware Error */ l_errl = new ERRORLOG::ErrlEntry(ERRORLOG::ERRL_SEV_UNRECOVERABLE, MOD_FAPI2_GET_TARGETING_ATTR, RC_INVALID_ATTRIBUTE, TWO_UINT32_TO_UINT64( i_pFapiTarget.getType(), TARGETING::get_huid(l_pTargTarget) ), i_targAttrId); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); } } return l_rc; } bool setTargetingAttrHelper(TARGETING::Target * l_pTargTarget, const TARGETING::ATTRIBUTE_ID i_targAttrId, const uint32_t i_attrSize, void * o_pAttr) { return l_pTargTarget->_trySetAttr(i_targAttrId, i_attrSize, o_pAttr); } /// /// @brief Sets a Targeting attribute, this is called by the macro that maps a /// FAPI Attribute set to a FAPI2 TARGETING attribute and should not be /// called directly /// See doxygen in H file /// ReturnCode setTargetingAttr( const Target& i_pFapiTarget, const TARGETING::ATTRIBUTE_ID i_targAttrId, const uint32_t i_attrSize, void * i_pAttr) { ReturnCode l_rc; errlHndl_t l_errl = NULL; TARGETING::Target * l_pTargTarget = NULL; l_errl = getTargetingTarget(i_pFapiTarget, l_pTargTarget); if (l_errl) { FAPI_ERR("setTargetingAttr: Error from getTargetingTarget"); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { // Note directly calling Target's private _trySetAttr function for code // size optimization, the public function is a template function that // cannot be called with a variable attribute ID, the template function // checks at compile time that the Targeting attribute is readable, but // that is already checked by the Targeting compiler bool l_success = setTargetingAttrHelper(l_pTargTarget, i_targAttrId, i_attrSize, i_pAttr); if (!l_success) { FAPI_ERR("setTargetingAttr: Error from setTargetingAttrHelper " "for target 0x%.8X and attribute 0x%x", TARGETING::get_huid(l_pTargTarget), i_targAttrId); /*@ * @errortype * @moduleid fapi2::MOD_FAPI2_SET_TARGETING_ATTR * @reasoncode RC_INVALID_ATTRIBUTE * @userdata1[0:31] FAPI2 Target Type * @userdata1[32:63] HB Target HUID * @userdata2 Requested attribute ID * @devdesc Invalid attribute write request * @custdesc Firmware Error */ l_errl = new ERRORLOG::ErrlEntry(ERRORLOG::ERRL_SEV_UNRECOVERABLE, MOD_FAPI2_SET_TARGETING_ATTR, RC_INVALID_ATTRIBUTE, TWO_UINT32_TO_UINT64( i_pFapiTarget.getType(), TARGETING::get_huid(l_pTargTarget) ), i_targAttrId); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); } } return l_rc; } //****************************************************************************** // platGetTargetName function //****************************************************************************** ReturnCode platGetTargetName(const Target& i_pFapiTarget, uint8_t & o_name) { ReturnCode l_rc; errlHndl_t l_errl = NULL; TARGETING::Target * l_pHbTarget = NULL; o_name = ENUM_ATTR_NAME_NONE; do { l_errl = getTargetingTarget(i_pFapiTarget, l_pHbTarget); if (l_errl) { FAPI_ERR("platGetTargetName: Error from getTargetingTarget"); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } TARGETING::MODEL l_model = l_pHbTarget->getAttr(); if (l_model == TARGETING::MODEL_NIMBUS) { o_name = ENUM_ATTR_NAME_NIMBUS; } else if (l_model == TARGETING::MODEL_CUMULUS) { o_name = ENUM_ATTR_NAME_CUMULUS; } else if (l_model == TARGETING::MODEL_CENTAUR) { o_name = ENUM_ATTR_NAME_CENTAUR; } else { FAPI_ERR("platGetTargetName. Unknown name 0x%x", l_model); /*@ * @errortype * @moduleid fapi2::MOD_FAPI2_GET_TARGETING_TARGET * @reasoncode RC_UNKNOWN_MODEL * @userdata1[0:31] FAPI2 Type * @userdata1[32:63] HB Target HUID * @userdata2[0:31] HB Type * @userdata2[32:63] HB Model * @devdesc HB target found with unknown model attribute * @custdesc Firmware Error */ l_errl = new ERRORLOG::ErrlEntry(ERRORLOG::ERRL_SEV_UNRECOVERABLE, MOD_FAPI2_GET_TARGETING_TARGET, RC_UNKNOWN_MODEL, TWO_UINT32_TO_UINT64( i_pFapiTarget.getType(), TARGETING::get_huid(l_pHbTarget) ), TWO_UINT32_TO_UINT64( l_pHbTarget-> getAttr(), l_model)); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } } while (0); return l_rc; } //****************************************************************************** // platGetFunctional function //****************************************************************************** ReturnCode platGetFunctional(const Target& i_pFapiTarget, uint8_t & o_functional) { errlHndl_t l_errl = NULL; ReturnCode l_rc; TARGETING::Target * l_pHbTarget = NULL; o_functional = 0; l_errl = getTargetingTarget(i_pFapiTarget, l_pHbTarget); if (l_errl) { FAPI_ERR("platGetFunctional: Error from getTargetingTarget"); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { TARGETING::PredicateIsFunctional l_functional; if (l_functional(l_pHbTarget)) { o_functional = 1; } } return l_rc; } //****************************************************************************** // fapi::platAttrSvc::platGetTargetPos function //****************************************************************************** ReturnCode platGetTargetPos(const Target& i_pFapiTarget, uint32_t & o_pos) { errlHndl_t l_errl = NULL; ReturnCode l_rc; TARGETING::Target * l_pTarget = NULL; // Get the Targeting Target l_errl = getTargetingTarget(i_pFapiTarget, l_pTarget); if (l_errl) { FAPI_ERR("platGetTargetPos: Error from getTargetingTarget"); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { uint16_t l_pos = l_pTarget->getAttr(); //@todo-RTC:161594-ATTR_POS is defined as per-drawer, so need to // mod the value down appropriately o_pos = l_pos; } return l_rc; } //****************************************************************************** // fapi::platAttrSvc::platGetFusedCoreMode function //****************************************************************************** ReturnCode platGetFusedCoreMode(uint8_t & o_isFused) { o_isFused = TARGETING::is_fused_mode(); return fapi2::ReturnCode(); } //****************************************************************************** // fapi2::platAttrSvc::platGetPoundVBucketData function //****************************************************************************** ReturnCode platGetPoundVBucketData(const Target& i_fapiTarget, uint8_t * o_poundVData) { fapi2::ReturnCode rc; // Don't need to check the type here, the FAPI_ATTR_GET macro clause // "fapi2::Target(TARGET)" does it for us. However, // to enable a streamlined dump of the attributes, all plat code must use // the generic TARGET_TYPE_ALL -- so convert back to the correct type // manually TARGETING::Target * l_pTarget = NULL; errlHndl_t l_errl = getTargetingTarget(i_fapiTarget, l_pTarget); if (l_errl) { FAPI_ERR("platGetPoundVBucketData: Error from getTargetingTarget"); rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { fapi2::Target l_fapiTarget( l_pTarget); rc = p9_pm_get_poundv_bucket_attr(l_fapiTarget,o_poundVData); } return rc; } //****************************************************************************** // fapi2::platAttrSvc::platGetPoundWBucketData function //****************************************************************************** ReturnCode platGetPoundWBucketData(const Target& i_fapiTarget, uint8_t * o_poundWData) { fapi2::ReturnCode rc; // Don't need to check the type here, the FAPI_ATTR_GET macro clause // "fapi2::Target(TARGET)" does it for us. However, // to enable a streamlined dump of the attributes, all plat code must use // the generic TARGET_TYPE_ALL -- so convert back to the correct type // manually TARGETING::Target * l_pTarget = NULL; errlHndl_t l_errl = getTargetingTarget(i_fapiTarget, l_pTarget); if (l_errl) { FAPI_ERR("platGetPoundWBucketData: Error from getTargetingTarget"); rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { fapi2::Target l_fapiTarget( l_pTarget); rc = p9_pm_get_poundw_bucket_attr(l_fapiTarget,o_poundWData); } return rc; } ReturnCode platParseWOFTables(uint8_t* o_wofData); //****************************************************************************** // fapi2::platAttrSvc::platGetWOFTableData function //****************************************************************************** ReturnCode platGetWOFTableData(const Target& i_fapiTarget, uint8_t * o_wofTableData) { fapi2::ReturnCode rc; // Parse the tables and return a single wof table rc = platParseWOFTables(o_wofTableData); return rc; } //****************************************************************************** // ATTR_BAD_DQ_BITMAP getter/setter constant definitions //****************************************************************************** // define structure for the format of DIMM_BAD_DQ_DATA struct dimmBadDqDataFormat { uint32_t iv_magicNumber; uint8_t iv_version; uint8_t iv_reserved1; uint8_t iv_reserved2; uint8_t iv_reserved3; uint8_t iv_bitmaps[mss::MAX_RANK_PER_DIMM][mss::BAD_DQ_BYTE_COUNT]; uint8_t iv_rowRepairData[mss::MAX_RANK_PER_DIMM] [mss::ROW_REPAIR_BYTE_COUNT]; uint8_t iv_unused[16]; }; // constant definitions const uint8_t SPARE_DRAM_DQ_BYTE_NUMBER_INDEX = 9; const uint32_t DIMM_BAD_DQ_MAGIC_NUMBER = 0xbadd4471; const uint8_t DIMM_BAD_DQ_VERSION = 1; const uint8_t DIMM_BAD_DQ_NUM_BYTES = 80; size_t DIMM_BAD_DQ_SIZE_BYTES = 0x50; union wiringData { uint8_t nimbus[mss::PORTS_PER_MCS][mss::MAX_DQ_BITS]; uint8_t cumulus[MAX_PORTS_PER_CEN][DIMM_BAD_DQ_NUM_BYTES]; }; //****************************************************************************** // fapi2::platAttrSvc::__getChipModel function //****************************************************************************** TARGETING::ATTR_MODEL_type __getChipModel() { // determine whether this is a Nimbus or Cumulus chip TARGETING::Target * masterProc = nullptr; TARGETING::targetService().masterProcChipTargetHandle(masterProc); return masterProc->getAttr(); } //****************************************************************************** // fapi2::platAttrSvc::__getMcsAndPortSlct function //****************************************************************************** ReturnCode __getMcsAndPortSlct( const Target& i_fapiDimm, TARGETING::TargetHandle_t &o_mcsTarget, uint32_t &o_ps ) { fapi2::ReturnCode l_rc; errlHndl_t l_errl = nullptr; do { TARGETING::ATTR_MODEL_type procType = __getChipModel(); TARGETING::TargetHandle_t l_port = nullptr; // If the proc is Cumulus, we need to get the MBA. if ( TARGETING::MODEL_CUMULUS == procType ) { TARGETING::TargetHandle_t l_dimmTarget; l_errl = getTargetingTarget(i_fapiDimm, l_dimmTarget); if ( l_errl ) { FAPI_ERR( "__getMcsAndPortSlct: Error from " "getTargetingTarget getting DIMM" ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } Target l_fapiMba = i_fapiDimm.getParent(); l_errl = getTargetingTarget( l_fapiMba, l_port ); if ( l_errl ) { FAPI_ERR( "__getMcsAndPortSlct: Error from " "getTargetingTarget getting MBA." ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } uint8_t mbaPos = l_port->getAttr() % MAX_MBA_PER_CEN; // 0-1 uint8_t mbaPort = l_dimmTarget->getAttr() % MAX_PORTS_PER_MBA; // 0-1 o_ps = (mbaPos*MAX_PORTS_PER_MBA)+mbaPort; // 0-3 } // If the proc is Nimbus, we need to get the MCA. else { Target l_fapiMca = i_fapiDimm.getParent(); l_errl = getTargetingTarget( l_fapiMca, l_port ); if ( l_errl ) { FAPI_ERR( "__getMcsAndPortSlct: Error from " "getTargetingTarget getting MCA." ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } // Get the MCS. Target l_fapiMcs; l_fapiMcs = l_fapiMca.getParent(); l_errl = getTargetingTarget( l_fapiMcs, o_mcsTarget ); if ( l_errl ) { FAPI_ERR( "__getMcsAndPortSlct: Error from " "getTargetingTarget getting MCS." ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } o_ps = l_port->getAttr() % mss::PORTS_PER_MCS; } }while(0); return l_rc; } //****************************************************************************** // fapi2::platAttrSvc::__badDqBitmapGetHelperAttrs function //****************************************************************************** ReturnCode __badDqBitmapGetHelperAttrs( const TARGETING::TargetHandle_t i_dimmTarget, wiringData &o_wiringData, uint64_t &o_allMnfgFlags, uint32_t &o_ps ) { fapi2::ReturnCode l_rc; do { Target l_fapiDimm( i_dimmTarget ); TARGETING::TargetHandle_t l_mcsTarget = nullptr; __getMcsAndPortSlct( l_fapiDimm, l_mcsTarget, o_ps ); TARGETING::ATTR_MODEL_type procType = __getChipModel(); // Get the DQ to DIMM Connector DQ Wiring attribute. // Note that for C-DIMMs, this will return a simple 1:1 mapping. // This code cannot tell the difference between C-DIMMs and IS-DIMMs. if ( TARGETING::MODEL_NIMBUS == procType ) { // memset to avoid known syntax issue with previous compiler // versions and ensure zero initialized array. memset( o_wiringData.nimbus, 0, sizeof(o_wiringData.nimbus) ); l_rc = FAPI_ATTR_GET( fapi2::ATTR_MSS_VPD_DQ_MAP, l_mcsTarget, o_wiringData.nimbus ); } else if ( TARGETING::MODEL_CUMULUS == procType ) { // memset to avoid known syntax issue with previous compiler // versions and ensure zero initialized array. memset( o_wiringData.cumulus, 0, sizeof(o_wiringData.cumulus) ); // Check DIMM type uint8_t l_dimmType = 0; Target l_fapiMba = l_fapiDimm.getParent(); TARGETING::TargetHandle_t l_mba = nullptr; errlHndl_t l_errl = getTargetingTarget( l_fapiMba, l_mba ); if ( l_errl ) { FAPI_ERR( "__badDqBitmapGetHelperAttrs: Error from " "getTargetingTarget getting MBA." ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } l_rc = FAPI_ATTR_GET( fapi2::ATTR_CEN_EFF_CUSTOM_DIMM, l_mba, l_dimmType ); if ( l_rc ) { FAPI_ERR( "__badDqBitmapGetHelperAttrs: Error getting " "fapi2::ATTR_CEN_EFF_CUSTOM_DIMM" ); break; } // C-DIMMs return a direct 1:1 mapping if ( fapi2::ENUM_ATTR_CEN_EFF_CUSTOM_DIMM_YES == l_dimmType ) { for ( uint8_t port = 0; port < MAX_PORTS_PER_CEN; port++ ) { for ( uint8_t i = 0; i < DIMM_BAD_DQ_NUM_BYTES; i++ ) { o_wiringData.cumulus[port][i] = i; } } } // ISDIMMs require the mapping from ATTR_CEN_VPD_ISDIMMTOC4DQ else { Target l_fapiMembuf = l_fapiMba.getParent(); TARGETING::TargetHandle_t l_membuf = nullptr; errlHndl_t l_errl = getTargetingTarget( l_fapiMembuf, l_membuf ); if ( l_errl ) { FAPI_ERR( "__badDqBitmapGetHelperAttrs: Error from " "getTargetingTarget getting Membuf." ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } l_rc = FAPI_ATTR_GET( fapi2::ATTR_CEN_VPD_ISDIMMTOC4DQ, l_membuf, o_wiringData.cumulus ); } } else { FAPI_ERR( "__badDqBitmapGetHelperAttrs: Invalid procType" ); assert(false); } if ( l_rc ) { FAPI_ERR( "__badDqBitmapGetHelperAttrs: Unable to read mapping " "attribute" ); break; } // Manufacturing flags attribute o_allMnfgFlags = 0; // Get the manufacturing flags bitmap to be used in both get and set l_rc = FAPI_ATTR_GET( fapi2::ATTR_MNFG_FLAGS, fapi2::Target(), o_allMnfgFlags ); if ( l_rc ) { FAPI_ERR( "__badDqBitmapGetHelperAttrs: Unable to read attribute - " "ATTR_MNFG_FLAGS" ); break; } }while(0); return l_rc; } //****************************************************************************** // fapi2::platAttrSvc::__dimmUpdateDqBitmapEccByte function //****************************************************************************** errlHndl_t __dimmUpdateDqBitmapEccByte( TARGETING::TargetHandle_t i_dimm, uint8_t (&o_data)[mss::MAX_RANK_PER_DIMM][mss::BAD_DQ_BYTE_COUNT] ) { errlHndl_t l_errl = nullptr; const uint8_t ECC_DQ_BYTE_NUMBER_INDEX = 8; const uint8_t ENUM_ATTR_SPD_MODULE_MEMORY_BUS_WIDTH_WE8 = 0x08; size_t MEM_BUS_WIDTH_SIZE = 0x01; uint8_t *l_eccBits = static_cast(malloc(MEM_BUS_WIDTH_SIZE)); do { l_errl = deviceRead( i_dimm, l_eccBits, MEM_BUS_WIDTH_SIZE, DEVICE_SPD_ADDRESS(SPD::MODULE_MEMORY_BUS_WIDTH) ); if ( l_errl ) { FAPI_ERR( "__dimmUpdateDqBitmapEccByte: Failed to get " "SPD::MODULE_MEMORY_BUS_WIDTH." ); break; } // The ATTR_SPD_MODULE_MEMORY_BUS_WIDTH contains ENUM values // for bus widths of 8, 16, 32, and 64 bits both with ECC // and without ECC. WExx ENUMS denote the ECC extension // is present, and all have bit 3 set. Therefore, // it is only required to check against the WE8 = 0x08 ENUM // value in order to determine if ECC lines are present. if ( !(ENUM_ATTR_SPD_MODULE_MEMORY_BUS_WIDTH_WE8 & *l_eccBits) ) { // Iterate through each rank and set DQ bits in // caller's data. for ( uint8_t i = 0; i < mss::MAX_RANK_PER_DIMM; i++ ) { // Set DQ bits in caller's data o_data[i][ECC_DQ_BYTE_NUMBER_INDEX] = 0xFF; } } }while(0); if ( l_eccBits != nullptr ) { free( l_eccBits ); l_eccBits = nullptr; } return l_errl; } //****************************************************************************** // fapi2::platAttrSvc::__dimmGetDqBitmapSpareByte function //****************************************************************************** ReturnCode __dimmGetDqBitmapSpareByte( TARGETING::TargetHandle_t i_dimm, uint8_t (&o_spareByte)[mss::MAX_RANK_PER_DIMM]) { ReturnCode l_rc; do { // Spare DRAM Attribute: Returns spare DRAM availability for // all DIMMs associated with the target MCS. uint8_t l_dramSpare[mss::PORTS_PER_MCS][mss::MAX_DIMM_PER_PORT] [mss::MAX_RANK_PER_DIMM] = {}; Target l_fapiDimm( i_dimm ); uint32_t l_ds = i_dimm->getAttr() % mss::MAX_DIMM_PER_PORT; TARGETING::TargetHandle_t l_mcsTarget = nullptr; uint32_t l_ps = 0; __getMcsAndPortSlct( l_fapiDimm, l_mcsTarget, l_ps ); TARGETING::ATTR_MODEL_type procType = __getChipModel(); if ( TARGETING::MODEL_NIMBUS == procType ) { l_rc = FAPI_ATTR_GET( fapi2::ATTR_EFF_DIMM_SPARE, l_mcsTarget, l_dramSpare ); } else if ( TARGETING::MODEL_CUMULUS == procType ) { Target l_fapiMba = l_fapiDimm.getParent(); TARGETING::TargetHandle_t l_mbaTrgt = nullptr; errlHndl_t l_errl = getTargetingTarget( l_fapiMba, l_mbaTrgt ); if ( l_errl ) { FAPI_ERR( "__dimmGetDqBitmapSpareByte: Error from " "getTargetingTarget getting MBA." ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } l_rc = FAPI_ATTR_GET( fapi2::ATTR_CEN_VPD_DIMM_SPARE, l_mbaTrgt, l_dramSpare ); } else { FAPI_ERR( "__dimmGetDqBitmapSpareByte: Invalid procType" ); assert(false); } if ( l_rc ) { FAPI_ERR( "__dimmGetDqBitmapSpareByte: Error getting DRAM Spare " "data." ); break; } // Iterate through each rank of this DIMM for ( uint8_t i = 0; i < mss::MAX_RANK_PER_DIMM; i++ ) { // Handle spare DRAM configuration cases switch ( l_dramSpare[l_ps][l_ds][i] ) { case fapi2::ENUM_ATTR_EFF_DIMM_SPARE_NO_SPARE: // Set DQ bits reflecting unconnected // spare DRAM in caller's data o_spareByte[i] = 0xFF; break; case fapi2::ENUM_ATTR_EFF_DIMM_SPARE_LOW_NIBBLE: o_spareByte[i] = 0x0F; break; case fapi2::ENUM_ATTR_EFF_DIMM_SPARE_HIGH_NIBBLE: o_spareByte[i] = 0xF0; break; // As erroneous value will not be encountered. case fapi2::ENUM_ATTR_EFF_DIMM_SPARE_FULL_BYTE: default: o_spareByte[i] = 0x0; break; } } }while(0); return l_rc; } //****************************************************************************** // fapi2::platAttrSvc::__dimmUpdateDqBitmapSpareByte function //****************************************************************************** ReturnCode __dimmUpdateDqBitmapSpareByte( TARGETING::TargetHandle_t i_dimm, uint8_t (&o_data)[mss::MAX_RANK_PER_DIMM][mss::BAD_DQ_BYTE_COUNT] ) { ReturnCode l_rc; do { uint8_t spareByte[mss::MAX_RANK_PER_DIMM]; memset( spareByte, 0, sizeof(spareByte) ); l_rc = __dimmGetDqBitmapSpareByte( i_dimm, spareByte ); if ( l_rc ) { FAPI_ERR("__dimmUpdateDqBitmapSpareByte: Error getting spare byte"); break; } for ( uint32_t i = 0; i < mss::MAX_RANK_PER_DIMM; i++ ) { o_data[i][SPARE_DRAM_DQ_BYTE_NUMBER_INDEX] |= spareByte[i]; } }while(0); return l_rc; } //****************************************************************************** // fapi2::platAttrSvc::__compareEccAndSpare function //****************************************************************************** ReturnCode __compareEccAndSpare(TARGETING::TargetHandle_t i_dimm, bool & o_mfgModeBadBitsPresent, uint8_t i_callersData[mss::MAX_RANK_PER_DIMM][mss::BAD_DQ_BYTE_COUNT], uint8_t (&o_eccSpareBitmap)[mss::MAX_RANK_PER_DIMM][mss::BAD_DQ_BYTE_COUNT]) { // This function will compare o_eccSpareBitmap, which represents a bad dq // bitmap with the appropriate spare/ECC bits set (if any) and all other DQ // lines functional, to the caller's data. If discrepancies are found, we // know this is the result of a manufacturing mode process and these bits // should not be recorded. ReturnCode l_rc; errlHndl_t l_errl = nullptr; do { // Zero-initialize the o_eccSpareBitmap bad dq bitmap. memset( o_eccSpareBitmap, 0, sizeof(o_eccSpareBitmap) ); // Check ECC. l_errl = __dimmUpdateDqBitmapEccByte(i_dimm, o_eccSpareBitmap); if ( l_errl ) { FAPI_ERR( "__compareEccAndSpare: Error getting ECC data " "(Mfg mode)" ); l_rc = fapi2::FAPI2_RC_INVALID_ATTR_GET; break; } // Check spare DRAM. l_rc = __dimmUpdateDqBitmapSpareByte(i_dimm, o_eccSpareBitmap); if ( l_rc ) { FAPI_ERR( "__compareEccAndSpare: Error getting spare DRAM data " "(Mfg mode)" ); break; } // Compare o_eccSpareBitmap to i_callersData. for ( uint8_t i = 0; i < mss::MAX_RANK_PER_DIMM; i++ ) { for (uint8_t j = 0; j < mss::BAD_DQ_BYTE_COUNT; j++) { if ( i_callersData[i][j] != o_eccSpareBitmap[i][j] ) { o_mfgModeBadBitsPresent = true; break; } } if ( o_mfgModeBadBitsPresent ) break; } // Create and log error if discrepancies were found. if ( o_mfgModeBadBitsPresent ) { FAPI_ERR( "__compareEccAndSpare: Read/write requested while in " "DISABLE_DRAM_REPAIRS mode found extra bad bits set for " "DIMM" ); /*@ * @errortype * @moduleid MOD_FAPI2_BAD_DQ_BITMAP * @reasoncode RC_BAD_DQ_MFG_MODE_BITS * @userdata1 DIMM Target HUID * @userdata2 * @devdesc Extra bad bits set for DIMM * @custdesc Read/write requested while in * DISABLE_DRAM_REPAIRS mode found * extra bad bits set for DIMM */ l_errl = new ERRORLOG::ErrlEntry( ERRORLOG::ERRL_SEV_PREDICTIVE, MOD_FAPI2_BAD_DQ_BITMAP, RC_BAD_DQ_MFG_MODE_BITS, TARGETING::get_huid(i_dimm) ); l_errl->addFFDC( HWPF_COMP_ID, &o_eccSpareBitmap[0], sizeof(o_eccSpareBitmap[0]), 1, CLEAN_BAD_DQ_BITMAP_RANK0 ); l_errl->addFFDC( HWPF_COMP_ID, &o_eccSpareBitmap[1], sizeof(o_eccSpareBitmap[1]), 1, CLEAN_BAD_DQ_BITMAP_RANK1 ); l_errl->addFFDC( HWPF_COMP_ID, &o_eccSpareBitmap[2], sizeof(o_eccSpareBitmap[2]), 1, CLEAN_BAD_DQ_BITMAP_RANK2 ); l_errl->addFFDC( HWPF_COMP_ID, &o_eccSpareBitmap[3], sizeof(o_eccSpareBitmap[3]), 1, CLEAN_BAD_DQ_BITMAP_RANK3 ); l_errl->addFFDC( HWPF_COMP_ID, &i_callersData[0], sizeof(i_callersData[0]), 1, CURRENT_BAD_DQ_BITMAP_RANK0 ); l_errl->addFFDC( HWPF_COMP_ID, &i_callersData[1], sizeof(i_callersData[1]), 1, CURRENT_BAD_DQ_BITMAP_RANK1 ); l_errl->addFFDC( HWPF_COMP_ID, &i_callersData[2], sizeof(i_callersData[2]), 1, CURRENT_BAD_DQ_BITMAP_RANK2 ); l_errl->addFFDC( HWPF_COMP_ID, &i_callersData[3], sizeof(i_callersData[3]), 1, CURRENT_BAD_DQ_BITMAP_RANK3 ); l_errl->addHwCallout(i_dimm, HWAS::SRCI_PRIORITY_HIGH, HWAS::DELAYED_DECONFIG, HWAS::GARD_Predictive); errlCommit( l_errl, HWPF_COMP_ID ); } }while(0); return l_rc; } //****************************************************************************** // fapi2::platAttrSvc::__mcLogicalToDimmDqHelper function //****************************************************************************** ReturnCode __mcLogicalToDimmDqHelper( const Target& i_fapiDimm, wiringData i_wiringData, uint32_t i_ps, uint8_t i_mcPin, uint8_t &o_dimm_dq ) { fapi2::ReturnCode l_rc; do { uint64_t l_c4 = 0; TARGETING::ATTR_MODEL_type procType = __getChipModel(); if ( TARGETING::MODEL_NIMBUS == procType ) { Target l_fapiMca = i_fapiDimm.getParent(); // For Nimbus, translate from MC Logical to C4 format l_rc = mss::rosetta_map::mc_to_c4( l_fapiMca, i_mcPin, l_c4 ); if ( l_rc ) { FAPI_ERR( "__mcLogicalToDimmDqHelper: " "rosetta_map::mc_to_c4 failed." ); break; } // use wiring data to translate c4 pin to dimm dq format // Note: the wiring data maps from dimm dq format to c4 format for ( uint8_t bit = 0; bit < mss::MAX_DQ_BITS; bit++ ) { // Check to see which bit in the wiring data corresponds to our // DIMM DQ format pin. if ( i_wiringData.nimbus[i_ps][bit] == l_c4 ) { o_dimm_dq = bit; break; } } } else if ( TARGETING::MODEL_CUMULUS == procType ) { // For Cumulus, MC to C4 is 1-to-1 l_c4 = i_mcPin; // use wiring data to translate c4 pin to dimm dq format // Note: the wiring data maps from dimm dq format to c4 format for ( uint8_t bit = 0; bit < DIMM_BAD_DQ_NUM_BYTES; bit++ ) { // Check to see which bit in the wiring data corresponds to our // DIMM DQ format pin. if ( i_wiringData.cumulus[i_ps][bit] == l_c4 ) { o_dimm_dq = bit; break; } } } else { FAPI_ERR( "__mcLogicalToDimmDqHelper: Invalid procType" ); assert(false); } }while(0); return l_rc; } //****************************************************************************** // fapi2::platAttrSvc::__mcLogicalToDimmDq function //****************************************************************************** ReturnCode __mcLogicalToDimmDq( const Target& i_fapiDimm, uint8_t i_mcLogical_bitmap[mss::MAX_RANK_PER_DIMM][mss::BAD_DQ_BYTE_COUNT], uint8_t (&o_dimmDq_bitmap)[mss::MAX_RANK_PER_DIMM][mss::BAD_DQ_BYTE_COUNT], wiringData i_wiringData, uint8_t i_spareByte[mss::MAX_RANK_PER_DIMM], uint32_t i_ps ) { fapi2::ReturnCode l_rc; memset(o_dimmDq_bitmap, 0, sizeof(o_dimmDq_bitmap)); // We need to translate the bad dq bits from MC logical format to // Connector/DIMM DQ format. This will require two translations. // MC Logical/PHY-->Module/C4 Package-->Connector/DIMM DQ format // Note: MC Logical (0-71) maps linearly to PHY DP0(lane 0-15), // DP1(lane 0-15)...DP4(lane 0-15) // loop through iv_bitmaps ranks for ( uint8_t rank = 0; rank < mss::MAX_RANK_PER_DIMM; rank++ ) { // loop through iv_bitmaps bytes for ( uint8_t byte = 0; byte < mss::BAD_DQ_BYTE_COUNT; byte++ ) { // if bit found on if ( 0 != i_mcLogical_bitmap[rank][byte] ) { // find the set bit for ( uint8_t bit = 0; bit < mss::BITS_PER_BYTE; bit++ ) { if ( i_mcLogical_bitmap[rank][byte] & (0x80 >> bit) ) { // Check the spares if ( byte == SPARE_DRAM_DQ_BYTE_NUMBER_INDEX && i_spareByte[rank] & (0x80 >> bit) ) { // The spareByte can be one of: 0x00 0x0F 0xF0 // 0xFF If a bit is set, then that spare is // unconnected so continue to the next bit, // do not translate continue; } // get the pin/bit position in MC Logical format uint8_t l_mcPin = (byte*8) + bit; // pin 0-79 uint8_t l_dimm_dq = 0; // translate the MC logical pin to DIMM DQ format l_rc = __mcLogicalToDimmDqHelper( i_fapiDimm, i_wiringData, i_ps, l_mcPin, l_dimm_dq ); if ( l_rc ) { FAPI_ERR( "__mcLogicalToDimmDq: failure from " "__mcLogicalToDimmDqHelper." ); continue; } // set bit in new o_dimmDq_bitmap uint8_t l_setByte = l_dimm_dq/8; uint8_t l_setBit = 0x80 >> (l_dimm_dq%8); o_dimmDq_bitmap[rank][l_setByte] |= l_setBit; } } } } } return l_rc; } //****************************************************************************** // fapi2::platAttrSvc::__dimmDqToMcLogicalHelper function //****************************************************************************** ReturnCode __dimmDqToMcLogicalHelper( const Target& i_fapiDimm, wiringData i_wiringData, uint32_t i_ps, uint8_t i_dimm_dq, uint64_t &o_mcPin ) { fapi2::ReturnCode l_rc; uint64_t l_c4 = 0; TARGETING::ATTR_MODEL_type procType = __getChipModel(); if ( TARGETING::MODEL_NIMBUS == procType ) { // Translate from DIMM DQ format to C4 using wiring data // Note: the wiring data maps from dimm dq format to c4 format l_c4 = i_wiringData.nimbus[i_ps][i_dimm_dq]; Target l_fapiMca = i_fapiDimm.getParent(); // For Nimbus, translate from C4 to MC Logical format l_rc = mss::rosetta_map::c4_to_mc( l_fapiMca, l_c4, o_mcPin ); if ( l_rc ) { FAPI_ERR( "__dimmDqToMcLogicalHelper: " "rosetta_map::c4_to_mc failed." ); } } else if ( TARGETING::MODEL_CUMULUS == procType ) { // Translate from DIMM DQ format to C4 using wiring data // Note: the wiring data maps from dimm dq format to c4 format l_c4 = i_wiringData.cumulus[i_ps][i_dimm_dq]; // For Cumulus, C4 to MC Logical is 1-to-1 o_mcPin = l_c4; } else { FAPI_ERR( "__dimmDqToMcLogicalHelper: Invalid procType" ); assert(false); } return l_rc; } //****************************************************************************** // fapi2::platAttrSvc::__dimmDqToMcLogical function //****************************************************************************** ReturnCode __dimmDqToMcLogical( const Target& i_fapiDimm, uint8_t i_dimmDq_bitmap[mss::MAX_RANK_PER_DIMM][mss::BAD_DQ_BYTE_COUNT], uint8_t (&o_mcLogical_bitmap)[mss::MAX_RANK_PER_DIMM] [mss::BAD_DQ_BYTE_COUNT], wiringData i_wiringData, uint32_t i_ps ) { fapi2::ReturnCode l_rc; memset(o_mcLogical_bitmap, 0, sizeof(o_mcLogical_bitmap)); // We need to translate the bad dq bits back from DIMM DQ format to // MC Logical format for the getter. This will require two translations. // DIMM DQ-->Module/C4 Package-->MC Logical format // loop through iv_bitmaps ranks for ( uint8_t rank = 0; rank < mss::MAX_RANK_PER_DIMM; rank++ ) { // loop through iv_bitmaps bytes for ( uint8_t byte = 0; byte < mss::BAD_DQ_BYTE_COUNT; byte++ ) { // if bit found on if ( 0 != i_dimmDq_bitmap[rank][byte] ) { // find the set bit for ( uint8_t bit = 0; bit < mss::BITS_PER_BYTE; bit++ ) { if ( i_dimmDq_bitmap[rank][byte] & (0x80 >> bit) ) { // get the pin/bit position in DIMM DQ format uint8_t l_dimm_dq = (byte*8) + bit; // pin 0-79 uint64_t l_mcPin = 0; // translate the DIMM DQ pin to MC Logical format l_rc = __dimmDqToMcLogicalHelper( i_fapiDimm, i_wiringData, i_ps, l_dimm_dq, l_mcPin ); if ( l_rc ) { FAPI_ERR( "__dimmDqToMcLogical: failure from " "__dimmDqToMcLogicalHelper." ); continue; } // set bit in new o_dimmDq_bitmap uint8_t l_setByte = l_mcPin/8; uint8_t l_setBit = 0x80 >> (l_mcPin%8); o_mcLogical_bitmap[rank][l_setByte] |= l_setBit; } } } } } return l_rc; } //****************************************************************************** // fapi2::platAttrSvc::fapiAttrGetBadDqBitmap function //****************************************************************************** ReturnCode fapiAttrGetBadDqBitmap( const Target& i_dimmFapiTarget, ATTR_BAD_DQ_BITMAP_Type (&o_data) ) { FAPI_INF(">>fapiAttrGetBadDqBitmap: Getting bitmap"); fapi2::ReturnCode l_rc; errlHndl_t l_errl = nullptr; TARGETING::TargetHandle_t l_dimmTarget = nullptr; uint8_t * l_badDqData = static_cast( malloc(DIMM_BAD_DQ_SIZE_BYTES) ); do { l_errl = getTargetingTarget( i_dimmFapiTarget, l_dimmTarget ); if ( l_errl ) { FAPI_ERR( "fapiAttrGetBadDqBitmap: Error from getTargetingTarget" ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } wiringData l_wiringData; uint64_t l_allMnfgFlags; uint32_t l_ps = 0; l_rc = __badDqBitmapGetHelperAttrs( l_dimmTarget, l_wiringData, l_allMnfgFlags, l_ps ); if ( l_rc ) { FAPI_ERR( "fapiAttrGetBadDqBitmap: Error - unable to read " "attributes" ); break; } l_errl = deviceRead(l_dimmTarget, l_badDqData, DIMM_BAD_DQ_SIZE_BYTES, DEVICE_SPD_ADDRESS(SPD::DIMM_BAD_DQ_DATA)); if ( l_errl ) { FAPI_ERR( "fapiAttrGetBadDqBitmap: Failed to read DIMM Bad DQ " "data." ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } dimmBadDqDataFormat l_spdData; memcpy( &l_spdData, l_badDqData, sizeof(dimmBadDqDataFormat) ); // Zero caller's data memset(o_data, 0, sizeof(o_data)); // Check the magic number and version number. Note that the // magic number is stored in SPD in big endian format and // platforms of any endianness can access it if ( (be32toh(l_spdData.iv_magicNumber) != DIMM_BAD_DQ_MAGIC_NUMBER) || (l_spdData.iv_version != DIMM_BAD_DQ_VERSION) ) { FAPI_INF( "fapiAttrGetBadDqBitmap: SPD DQ not initialized." ); // We still set the ECC and spare bytes in the output data to // avoid issues in the setter when SPD DQ is not initialized. // Set bits for any unconnected DQs. // First, check ECC. l_errl = __dimmUpdateDqBitmapEccByte( l_dimmTarget, o_data ); if ( l_errl ) { FAPI_ERR( "fapiAttrGetBadDqBitmap: Error getting ECC data" ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } // Check spare DRAM. l_rc = __dimmUpdateDqBitmapSpareByte( l_dimmTarget, o_data ); if ( l_rc ) { FAPI_ERR( "fapiAttrGetBadDqBitmap: Error getting spare DRAM " "data" ); break; } } else { // Translate bitmap from DIMM DQ to MC Logical format l_rc = __dimmDqToMcLogical( i_dimmFapiTarget, l_spdData.iv_bitmaps, o_data, l_wiringData, l_ps ); if ( l_rc ) { FAPI_ERR( "fapiAttrGetBadDqBitmap: Error from " "__dimmDqToMcLogical." ); break; } // Set bits for any unconnected DQs. // First, check ECC. l_errl = __dimmUpdateDqBitmapEccByte( l_dimmTarget, o_data ); if ( l_errl ) { FAPI_ERR( "fapiAttrGetBadDqBitmap: Error getting ECC data" ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } // Check spare DRAM. l_rc = __dimmUpdateDqBitmapSpareByte( l_dimmTarget, o_data ); if ( l_rc ) { FAPI_ERR( "fapiAttrGetBadDqBitmap: Error getting spare DRAM " "data" ); break; } if ( l_allMnfgFlags & fapi2::ENUM_ATTR_MNFG_FLAGS_MNFG_DISABLE_DRAM_REPAIRS ) { // Flag to set if the discrepancies are found. bool mfgModeBadBitsPresent = false; uint8_t l_eccSpareBitmap[mss::MAX_RANK_PER_DIMM] [mss::BAD_DQ_BYTE_COUNT]; l_rc = __compareEccAndSpare( l_dimmTarget, mfgModeBadBitsPresent, o_data, l_eccSpareBitmap); if ( l_rc ) { FAPI_ERR( "fapiAttrGetBadDqBitmap: Error comparing bitmap " "with ECC/Spare bits set with caller's data" ); break; } if ( mfgModeBadBitsPresent ) { // correct the output bit map for (uint8_t i = 0; i < mss::MAX_RANK_PER_DIMM; i++) { for ( uint8_t j=0; j < (mss::BAD_DQ_BYTE_COUNT); j++ ) { o_data[i][j] = l_eccSpareBitmap[i][j]; } } } } } }while(0); if ( l_badDqData != nullptr ) { free( l_badDqData ); l_badDqData = nullptr; } return l_rc; } //****************************************************************************** // fapi2::platAttrSvc::fapiAttrSetBadDqBitmap function //****************************************************************************** ReturnCode fapiAttrSetBadDqBitmap( const Target& i_dimmFapiTarget, ATTR_BAD_DQ_BITMAP_Type (&i_data) ) { fapi2::ReturnCode l_rc; errlHndl_t l_errl = nullptr; TARGETING::TargetHandle_t l_dimmTarget = nullptr; uint8_t * l_badDqData = static_cast( malloc(DIMM_BAD_DQ_SIZE_BYTES) ); do { l_errl = getTargetingTarget(i_dimmFapiTarget, l_dimmTarget); if ( l_errl ) { FAPI_ERR( "fapiAttrSetBadDqBitmap: Error from getTargetingTarget" ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } wiringData l_wiringData; uint64_t l_allMnfgFlags; uint32_t l_ps = 0; l_rc = __badDqBitmapGetHelperAttrs( l_dimmTarget, l_wiringData, l_allMnfgFlags, l_ps ); // Read current BadDqBitmap into l_prev_data uint8_t l_prev_data[mss::MAX_RANK_PER_DIMM][mss::BAD_DQ_BYTE_COUNT]; bool badDqSet = false; l_rc = FAPI_ATTR_GET( fapi2::ATTR_BAD_DQ_BITMAP, l_dimmTarget, l_prev_data ); if (l_rc) { FAPI_ERR("fapiAttrSetBadDqBitmap: Error getting DQ bitmap"); break; } // Flag to set if the discrepancies are found bool mfgModeBadBitsPresent = false; uint8_t l_tmpData[mss::MAX_RANK_PER_DIMM][mss::BAD_DQ_BYTE_COUNT]; memcpy( &l_tmpData, &i_data, sizeof(i_data) ); l_errl = __dimmUpdateDqBitmapEccByte( l_dimmTarget, l_tmpData ); if ( l_errl ) { FAPI_ERR( "fapiAttrSetBadDqBitmap: Error getting ECC data." ); l_rc.setPlatDataPtr(reinterpret_cast(l_errl)); break; } l_rc = __dimmUpdateDqBitmapSpareByte( l_dimmTarget, l_tmpData ); if ( l_rc ) { FAPI_ERR("fapiAttrSetBadDqBitmap: Error getting spare DRAM data."); break; } // Check if Bad DQ bit set // Loop through all ranks for ( uint8_t i = 0; i < mss::MAX_RANK_PER_DIMM; i++ ) { // Loop through all DQs for (uint8_t j = 0; j < mss::BAD_DQ_BYTE_COUNT; j++) { if ( l_tmpData[i][j] != l_prev_data[i][j] ) { badDqSet = true; break; } } if ( badDqSet ) break; } // Set ATTR_RECONFIGURE_LOOP to indicate a bad DqBitMap was set if ( badDqSet ) { FAPI_INF("fapiAttrSetBadDqBitmap: Reconfigure needed, Bad DQ set"); fapi2::ATTR_RECONFIGURE_LOOP_Type l_reconfigAttr = 0; l_rc = FAPI_ATTR_GET( fapi2::ATTR_RECONFIGURE_LOOP, fapi2::Target(), l_reconfigAttr ); if ( l_rc ) { FAPI_ERR( "fapiAttrSetBadDqBitmap: Error getting " "ATTR_RECONFIGURE_LOOP" ); break; } // 'OR' values in case of multiple reasons for reconfigure l_reconfigAttr |= fapi2::ENUM_ATTR_RECONFIGURE_LOOP_BAD_DQ_BIT_SET; #ifndef CONFIG_VPD_GETMACRO_USE_EFF_ATTR l_rc = FAPI_ATTR_SET( fapi2::ATTR_RECONFIGURE_LOOP, fapi2::Target(), l_reconfigAttr ); if ( l_rc ) { FAPI_ERR( "fapiAttrSetBadDqBitmap: Error setting " "ATTR_RECONFIGURE_LOOP" ); break; } #endif } // If system is in DISABLE_DRAM_REPAIRS mode if ( l_allMnfgFlags & fapi2::ENUM_ATTR_MNFG_FLAGS_MNFG_DISABLE_DRAM_REPAIRS ) { uint8_t l_eccSpareBitmap[mss::MAX_RANK_PER_DIMM] [mss::BAD_DQ_BYTE_COUNT]; l_rc = __compareEccAndSpare( l_dimmTarget, mfgModeBadBitsPresent, l_tmpData, l_eccSpareBitmap ); if ( l_rc ) { FAPI_ERR( "fapiAttrSetBadDqBitmap: Error comparing " "bitmap with ECC/Spare bits set with " "caller's data." ); break; } // Don't write bad dq bitmap if discrepancies are found // Break out of do while loop if ( mfgModeBadBitsPresent ) break; } // Set up the data to write to SPD dimmBadDqDataFormat l_spdData; l_spdData.iv_magicNumber = htobe32( DIMM_BAD_DQ_MAGIC_NUMBER ); l_spdData.iv_version = DIMM_BAD_DQ_VERSION; l_spdData.iv_reserved1 = 0; l_spdData.iv_reserved2 = 0; l_spdData.iv_reserved3 = 0; memset( l_spdData.iv_bitmaps, 0, sizeof(l_spdData.iv_bitmaps) ); // We need to make sure the rest of the data in VPD beyond the bad dq // bitmap is unchanged. l_errl = deviceRead(l_dimmTarget, l_badDqData, DIMM_BAD_DQ_SIZE_BYTES, DEVICE_SPD_ADDRESS(SPD::DIMM_BAD_DQ_DATA)); if ( l_errl ) { FAPI_ERR( "fapiAttrSetBadDqBitmap: Failed to read DIMM Bad DQ " "data." ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } dimmBadDqDataFormat l_prevSpdData; memcpy( &l_prevSpdData, l_badDqData, sizeof(dimmBadDqDataFormat) ); memcpy( &l_spdData.iv_rowRepairData, l_prevSpdData.iv_rowRepairData, sizeof(l_spdData.iv_rowRepairData) ); memcpy( &l_spdData.iv_unused, l_prevSpdData.iv_unused, sizeof(l_spdData.iv_unused) ); // Get the spare byte uint8_t spareByte[mss::MAX_RANK_PER_DIMM]; memset( spareByte, 0, sizeof(spareByte) ); l_rc = __dimmGetDqBitmapSpareByte( l_dimmTarget, spareByte ); if ( l_rc ) { FAPI_ERR( "fapiAttrSetBadDqBitmap: Error getting spare byte" ); break; } // Translate bitmap from MC Logical to DIMM DQ format l_rc = __mcLogicalToDimmDq( i_dimmFapiTarget, i_data, l_spdData.iv_bitmaps, l_wiringData, spareByte, l_ps ); if ( l_rc ) { FAPI_ERR( "fapiAttrSetBadDqBitmap: Error from " "__mcLogicalToDimmDq." ); break; } l_errl = deviceWrite( l_dimmTarget, &l_spdData, DIMM_BAD_DQ_SIZE_BYTES, DEVICE_SPD_ADDRESS(SPD::DIMM_BAD_DQ_DATA) ); if ( l_errl ) { FAPI_ERR( "fapiAttrSetBadDqBitmap: Failed to write DIMM " "Bad DQ data." ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } }while(0); if ( l_badDqData != nullptr ) { free( l_badDqData ); l_badDqData = nullptr; } return l_rc; } //****************************************************************************** // fapi2::platAttrSvc::getRowRepairData function //****************************************************************************** ReturnCode getRowRepairData( const Target& i_fapiDimm, ATTR_ROW_REPAIR_DATA_Type (&o_data) ) { fapi2::ReturnCode l_rc; errlHndl_t l_errl = nullptr; uint8_t * l_data = static_cast( malloc(DIMM_BAD_DQ_SIZE_BYTES) ); do { // Get targeting target for the dimm TARGETING::TargetHandle_t l_dimm = nullptr; l_errl = getTargetingTarget( i_fapiDimm, l_dimm ); if ( l_errl ) { FAPI_ERR( "getRowRepairData: Error from getTargetingTarget" ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } // Zero callers data. memset(o_data, 0, sizeof(o_data)); // Read the data l_errl = deviceRead( l_dimm, l_data, DIMM_BAD_DQ_SIZE_BYTES, DEVICE_SPD_ADDRESS(SPD::DIMM_BAD_DQ_DATA) ); if ( l_errl ) { FAPI_ERR( "getRowRepairData: Failed to call deviceRead to get " "l_data." ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } dimmBadDqDataFormat l_spdData; memcpy( &l_spdData, l_data, sizeof(dimmBadDqDataFormat) ); // Check the header for correct data. if ( (be32toh(l_spdData.iv_magicNumber) != DIMM_BAD_DQ_MAGIC_NUMBER) || (l_spdData.iv_version != DIMM_BAD_DQ_VERSION) ) { FAPI_INF( "getRowRepairData: DIMM VPD not initialized." ); } else { // Get the row repair data. memcpy( &o_data, &l_spdData.iv_rowRepairData, sizeof(ATTR_ROW_REPAIR_DATA_Type) ); } }while(0); if ( l_data != nullptr ) { free( l_data ); l_data = nullptr; } return l_rc; } //****************************************************************************** // fapi2::platAttrSvc::setRowRepairData function //****************************************************************************** ReturnCode setRowRepairData( const Target& i_fapiDimm, ATTR_ROW_REPAIR_DATA_Type (&i_data) ) { fapi2::ReturnCode l_rc; errlHndl_t l_errl = nullptr; uint8_t * l_data = static_cast( malloc(DIMM_BAD_DQ_SIZE_BYTES) ); do { // Get targeting target for the dimm TARGETING::TargetHandle_t l_dimm = nullptr; l_errl = getTargetingTarget( i_fapiDimm, l_dimm ); if ( l_errl ) { FAPI_ERR( "setRowRepairData: Error from getTargetingTarget" ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } // Get the original data. l_errl = deviceRead( l_dimm, l_data, DIMM_BAD_DQ_SIZE_BYTES, DEVICE_SPD_ADDRESS(SPD::DIMM_BAD_DQ_DATA) ); if ( l_errl ) { FAPI_ERR( "setRowRepairData: Failed to call deviceRead to get " "l_data." ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } dimmBadDqDataFormat l_spdData; memcpy( &l_spdData, l_data, sizeof(dimmBadDqDataFormat) ); // Update the header l_spdData.iv_magicNumber = htobe32( DIMM_BAD_DQ_MAGIC_NUMBER ); l_spdData.iv_version = DIMM_BAD_DQ_VERSION; l_spdData.iv_reserved1 = 0; l_spdData.iv_reserved2 = 0; l_spdData.iv_reserved3 = 0; // Update the row repair data memcpy( &l_spdData.iv_rowRepairData, i_data, sizeof(ATTR_ROW_REPAIR_DATA_Type) ); // Write the data back to VPD. l_errl = deviceWrite( l_dimm, &l_spdData, DIMM_BAD_DQ_SIZE_BYTES, DEVICE_SPD_ADDRESS(SPD::DIMM_BAD_DQ_DATA) ); if ( l_errl ) { FAPI_ERR( "setRowRepairData: Failed to call deviceWrite to set " "l_data." ); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } }while(0); if ( l_data != nullptr ) { free( l_data ); l_data = nullptr; } return l_rc; } //****************************************************************************** // fapi::platAttrSvc::platGetSecurityMode function //****************************************************************************** ReturnCode platGetSecurityMode(uint8_t & o_securityMode) { #ifndef __HOSTBOOT_RUNTIME o_securityMode = SECUREBOOT::getSbeSecurityMode(); #else o_securityMode = 0xFF; FAPI_INF("Get SECURITY_MODE not supported from hostboot runtime"); #endif return fapi2::ReturnCode(); } //****************************************************************************** // fapi::platAttrSvc::platSetSecurityMode function //****************************************************************************** ReturnCode platSetSecurityMode() { FAPI_INF("Set SECURITY_MODE ignored when called from FAPI code"); return fapi2::ReturnCode(); } //----------------------------------------------------------------------------- ReturnCode platGetControlCapableData( const Target& i_fapiTarget, ATTR_CEN_VPD_POWER_CONTROL_CAPABLE_Type& o_vpdPowerControlCapableVal ) { ReturnCode rc; // Don't need to check the type here, the FAPI_ATTR_GET macro clause // "fapi2::Target(TARGET)" does it for us. However, // to enable a streamlined dump of the attributes, all plat code must use // the generic TARGET_TYPE_ALL -- so convert back to the correct type // manually TARGETING::Target * l_pTarget = NULL; errlHndl_t l_errl = getTargetingTarget(i_fapiTarget, l_pTarget); if (l_errl) { FAPI_ERR("platGetControlCapableData: Error from getTargetingTarget"); rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { fapi2::Target l_fapiTarget(l_pTarget); rc = getControlCapableData(l_fapiTarget, o_vpdPowerControlCapableVal); } return rc; } //----------------------------------------------------------------------------- ReturnCode platGetDQAttrISDIMM( const Target& i_fapiTarget, ATTR_CEN_VPD_ISDIMMTOC4DQ_Type &o_vpdIsDimmTOC4DQVal ) { ReturnCode rc; // Don't need to check the type here, the FAPI_ATTR_GET macro clause // "fapi2::Target(TARGET)" does it for us. However, // to enable a streamlined dump of the attributes, all plat code must use // the generic TARGET_TYPE_ALL -- so convert back to the correct type // manually TARGETING::Target * l_pTarget = NULL; errlHndl_t l_errl = getTargetingTarget(i_fapiTarget, l_pTarget); if (l_errl) { FAPI_ERR("platGetDQAttrISDIMM: Error from getTargetingTarget"); rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { fapi2::Target l_fapiTarget(l_pTarget); rc = getDQAttrISDIMM(l_fapiTarget, o_vpdIsDimmTOC4DQVal); } return rc; } //----------------------------------------------------------------------------- ReturnCode platGetDQSAttrISDIMM( const Target& i_fapiTarget, ATTR_CEN_VPD_ISDIMMTOC4DQS_Type& o_vpdIsDimmTOC4DQSVal ) { ReturnCode rc; // Don't need to check the type here, the FAPI_ATTR_GET macro clause // "fapi2::Target(TARGET)" does it for us. However, // to enable a streamlined dump of the attributes, all plat code must use // the generic TARGET_TYPE_ALL -- so convert back to the correct type // manually TARGETING::Target * l_pTarget = NULL; errlHndl_t l_errl = getTargetingTarget(i_fapiTarget, l_pTarget); if (l_errl) { FAPI_ERR("platGetDQSAttrISDIMM: Error from getTargetingTarget"); rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { fapi2::Target l_fapiTarget(l_pTarget); rc = getDQSAttrISDIMM(l_fapiTarget,o_vpdIsDimmTOC4DQSVal); } return rc; } //----------------------------------------------------------------------------- ReturnCode platGetMBvpdSensorMapPrimary( const Target& i_fapiTarget, ATTR_CEN_VPD_CDIMM_SENSOR_MAP_PRIMARY_Type& o_SensorMapType ) { ReturnCode rc; // Don't need to check the type here, the FAPI_ATTR_GET macro clause // "fapi2::Target(TARGET)" does it for us. However, // to enable a streamlined dump of the attributes, all plat code must use // the generic TARGET_TYPE_ALL -- so convert back to the correct type // manually TARGETING::Target * l_pTarget = NULL; errlHndl_t l_errl = getTargetingTarget(i_fapiTarget, l_pTarget); if (l_errl) { FAPI_ERR("platGetMBvpdSensorMapPrimary: " "Error from getTargetingTarget"); rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { fapi2::Target l_fapiTarget(l_pTarget); rc = getMBvpdSensorMap(l_fapiTarget, fapi2::SENSOR_MAP_PRIMARY, o_SensorMapType); } return rc; } //----------------------------------------------------------------------------- ReturnCode platGetMBvpdSensorMapSecondary( const Target& i_fapiTarget, ATTR_CEN_VPD_CDIMM_SENSOR_MAP_SECONDARY_Type& o_SensorMapType ) { ReturnCode rc; // Don't need to check the type here, the FAPI_ATTR_GET macro clause // "fapi2::Target(TARGET)" does it for us. However, // to enable a streamlined dump of the attributes, all plat code must use // the generic TARGET_TYPE_ALL -- so convert back to the correct type // manually TARGETING::Target * l_pTarget = NULL; errlHndl_t l_errl = getTargetingTarget(i_fapiTarget, l_pTarget); if (l_errl) { FAPI_ERR("platGetMBvpdSensorMapSecondary: " "Error from getTargetingTarget"); rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { fapi2::Target l_fapiTarget(l_pTarget); rc = getMBvpdSensorMap(l_fapiTarget, fapi2::SENSOR_MAP_SECONDARY, o_SensorMapType); } return rc; } //----------------------------------------------------------------------------- ReturnCode platGetMBvpdDramAddressMirroring( const Target& i_fapiTarget, ATTR_CEN_VPD_DRAM_ADDRESS_MIRRORING_Type& o_dramAddressMirroring ) { ReturnCode rc; // Don't need to check the type here, the FAPI_ATTR_GET macro clause // "fapi2::Target(TARGET)" does it for us. However, // to enable a streamlined dump of the attributes, all plat code must use // the generic TARGET_TYPE_ALL -- so convert back to the correct type // manually TARGETING::Target * l_pTarget = NULL; errlHndl_t l_errl = getTargetingTarget(i_fapiTarget, l_pTarget); if (l_errl) { FAPI_ERR("platGetMBvpdDramAddressMirroring: " "Error from getTargetingTarget"); rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { fapi2::Target l_fapiTarget(l_pTarget); rc = getMBvpdAddrMirrorData(l_fapiTarget, o_dramAddressMirroring); } return rc; } //----------------------------------------------------------------------------- ReturnCode platGetMBvpdDram2NModeEnabled( const Target& i_fapiTarget, ATTR_CEN_VPD_DRAM_2N_MODE_ENABLED_Type& o_dram2NModeEnabled ) { ReturnCode rc; // Don't need to check the type here, the FAPI_ATTR_GET macro clause // "fapi2::Target(TARGET)" does it for us. However, // to enable a streamlined dump of the attributes, all plat code must use // the generic TARGET_TYPE_ALL -- so convert back to the correct type // manually TARGETING::Target * l_pTarget = NULL; errlHndl_t l_errl = getTargetingTarget(i_fapiTarget, l_pTarget); if (l_errl) { FAPI_ERR("platGetMBvpdDram2NModeEnabled: " "Error from getTargetingTarget"); rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { fapi2::Target l_fapiTarget(l_pTarget); rc = getMBvpdDram2NModeEnabled(l_fapiTarget, o_dram2NModeEnabled); } return rc; } //----------------------------------------------------------------------------- ReturnCode platGetMBvpdMemoryDataVersion( const Target& i_fapiTarget, ATTR_CEN_VPD_VM_KEYWORD_Type& o_vpdVMKeywordVal ) { ReturnCode rc; do { // Don't need to check the type here, the FAPI_ATTR_GET macro clause // "fapi2::Target(TARGET)" does it for us. However, // to enable a streamlined dump of the attributes, all plat code must // use the generic TARGET_TYPE_ALL -- so convert back to the correct // type manually TARGETING::Target * l_pTarget = NULL; errlHndl_t l_errl = getTargetingTarget(i_fapiTarget, l_pTarget); if (l_errl) { FAPI_ERR("platGetMBvpdMemoryDataVersion: " "Error from getTargetingTarget"); rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } else { fapi2::Target l_fapiTarget(l_pTarget); rc = getMBvpdMemoryDataVersion(l_fapiTarget, o_vpdVMKeywordVal); } } while(0); return rc; } //----------------------------------------------------------------------------- ReturnCode platGetMBvpdSPDXRecordVersion( const Target& i_fapiTarget, ATTR_CEN_VPD_VD_KEYWORD_Type& o_vpdVDKeywordVal ) { ReturnCode rc; // Don't need to check the type here, the FAPI_ATTR_GET macro clause // "fapi2::Target(TARGET)" does it for us. However, // to enable a streamlined dump of the attributes, all plat code must use // the generic TARGET_TYPE_ALL -- so convert back to the correct type // manually TARGETING::Target * l_pTarget = NULL; errlHndl_t l_errl = getTargetingTarget(i_fapiTarget, l_pTarget); if (l_errl) { FAPI_ERR("platGetMBvpdSPDXRecordVersion: " "Error from getTargetingTarget"); rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { fapi2::Target l_fapiTarget(l_pTarget); rc = getMBvpdSPDXRecordVersion(l_fapiTarget, o_vpdVDKeywordVal); } return rc; } //----------------------------------------------------------------------------- ReturnCode platGetMBvpdSpareDramData( const Target& i_fapiTarget, ATTR_CEN_VPD_DIMM_SPARE_Type& o_vpdDimmSpare ) { ReturnCode rc; // Don't need to check the type here, the FAPI_ATTR_GET macro clause // "fapi2::Target(TARGET)" does it for us. However, // to enable a streamlined dump of the attributes, all plat code must use // the generic TARGET_TYPE_ALL -- so convert back to the correct type // manually TARGETING::Target * l_pTarget = NULL; errlHndl_t l_errl = getTargetingTarget(i_fapiTarget, l_pTarget); if (l_errl) { FAPI_ERR("platGetMBvpdSpareDramData: Error from getTargetingTarget"); rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { fapi2::Target l_fapiTarget(l_pTarget); rc = getMBvpdSpareDramData(l_fapiTarget, o_vpdDimmSpare); } return rc; } //----------------------------------------------------------------------------- ReturnCode platGetMBvpdVersion( const Target& i_fapiTarget, ATTR_CEN_VPD_VERSION_Type& o_vpdVersion ) { ReturnCode rc; do { // Don't need to check the type here, the FAPI_ATTR_GET macro clause // "fapi2::Target(TARGET)" does it for us. However, // to enable a streamlined dump of the attributes, all plat code must use // the generic TARGET_TYPE_ALL -- so convert back to the correct type // manually TARGETING::Target * l_pTarget = NULL; errlHndl_t l_errl = getTargetingTarget(i_fapiTarget, l_pTarget); if (l_errl) { FAPI_ERR("platGetMBvpdVersion: Error from getTargetingTarget"); rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { TARGETING::TargetHandleList l_mbaList; // Find MBA target from DIMM target getParentAffinityTargets(l_mbaList, l_pTarget, TARGETING::CLASS_UNIT, TARGETING::TYPE_MBA, false); const bool hbSwError = true; if(l_mbaList.empty()) { /*@ * @errortype * @moduleid fapi2::MOD_FAPI2_GET_ATTR_CEN_VPD_VERSION * @reasoncode fapi2::RC_NO_PARENT_MBA * @userdata1 DIMM HUID * @userdata2 0 * @devdesc platGetMBvpdMemoryDataVersion could not find * an mba parent target from the passed in * dimm target. */ l_errl = new ERRORLOG::ErrlEntry( ERRORLOG::ERRL_SEV_UNRECOVERABLE, fapi2::MOD_FAPI2_GET_ATTR_CEN_VPD_VERSION, fapi2::RC_NO_SINGLE_MBA, TARGETING::get_huid(l_pTarget), 0, hbSwError); FAPI_ERR("platGetMBvpdVersion: " "Error could not find an MBA parent for DIMM"); rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } else if(l_mbaList.size() != 1) { /*@ * @errortype * @moduleid fapi2::MOD_FAPI2_GET_ATTR_CEN_VPD_VERSION * @reasoncode fapi2::RC_NO_SINGLE_MBA * @userdata1 Number of MBAs * @userdata2 DIMM HUID * @devdesc platGetMBvpdMemoryDataVersion could not find * the expected 1 mba from the passed dimm target */ l_errl = new ERRORLOG::ErrlEntry( ERRORLOG::ERRL_SEV_UNRECOVERABLE, fapi2::MOD_FAPI2_GET_ATTR_CEN_VPD_VERSION, fapi2::RC_NO_SINGLE_MBA, l_mbaList.size(), TARGETING::get_huid(l_pTarget), hbSwError); FAPI_ERR("platGetMBvpdVersion: " "Found multiple MBA chips while " "seeking parent for DIMM"); rc.setPlatDataPtr(reinterpret_cast (l_errl)); break; } fapi2::Target l_fapiTarget(l_mbaList.front()); rc = getMBvpdVersion(l_fapiTarget, o_vpdVersion); } } while(0); return rc; } //----------------------------------------------------------------------------- ReturnCode platGetMBvpdVoltageSettingData( const Target& i_fapiTarget, ATTR_CEN_VPD_DW_KEYWORD_Type& o_vpdDWKeyword ) { ReturnCode rc; // Don't need to check the type here, the FAPI_ATTR_GET macro clause // "fapi2::Target(TARGET)" does it for us. However, // to enable a streamlined dump of the attributes, all plat code must use // the generic TARGET_TYPE_ALL -- so convert back to the correct type // manually TARGETING::Target * l_pTarget = NULL; errlHndl_t l_errl = getTargetingTarget(i_fapiTarget, l_pTarget); if (l_errl) { FAPI_ERR("platGetMBvpdVoltageSettingData: " "Error from getTargetingTarget"); rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { fapi2::Target l_fapiTarget(l_pTarget); rc = getMBvpdVoltageSettingData(l_fapiTarget, o_vpdDWKeyword); } return rc; } //---------------------------------------------------------------------------- ReturnCode platGetMBvpdAttr( const fapi2::Target& i_fapiTarget, const fapi2::AttributeId i_attr, void* o_pVal, const size_t i_valSize ) { ReturnCode rc; constexpr bool hbSwError{true}; do { // Don't need to check the type here, the FAPI_ATTR_GET macro clause // "fapi2::Target(TARGET)" does it for us. However, // to enable a streamlined dump of the attributes, all plat code must // use the generic TARGET_TYPE_ALL -- so convert back to the correct // type manually TARGETING::Target * l_pTarget = NULL; errlHndl_t l_errl = getTargetingTarget(i_fapiTarget, l_pTarget); if (l_errl) { FAPI_ERR("platGetMBvpdAttr: Error from getTargetingTarget"); rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { TARGETING::TYPE l_type = l_pTarget->getAttr(); if(TARGETING::TYPE_MBA != l_type) { if(TARGETING::TYPE_MEMBUF != l_type) { /*@ * @errortype * @moduleid fapi2::MOD_FAPI2_GET_MB_VPD_ATTR * @reasoncode fapi2::RC_INVALID_TARGET_TYPE * @userdata1 Target Type * @userdata2 Target HUID * @devdesc platGetMBvpdMemoryDataVersion requires * a target of type TYPE_MBA or TYPE_MEMBUF */ l_errl = new ERRORLOG::ErrlEntry( ERRORLOG::ERRL_SEV_UNRECOVERABLE, fapi2::MOD_FAPI2_GET_ATTR_CEN_VPD_VERSION, fapi2::RC_INVALID_TARGET_TYPE, l_type, TARGETING::get_huid(l_pTarget), hbSwError); rc = ReturnCode(fapi2::RC_INVALID_TARGET_TYPE); rc.setPlatDataPtr(reinterpret_cast (l_errl)); FAPI_ERR("platGetMBvpdAttr: Invalid Target Type."); break; } TARGETING::TargetHandleList l_mbaList; TARGETING::getChildAffinityTargets(l_mbaList, l_pTarget, TARGETING::CLASS_UNIT, TARGETING::TYPE_MBA, false); if(l_mbaList.empty()) { /*@ * @errortype * @moduleid fapi2::MOD_FAPI2_GET_MB_VPD_ATTR * @reasoncode fapi2::RC_NO_CHILD_MBA * @userdata1 Target Type * @userdata2 Target HUID * @devdesc platGetMBvpdMemoryDataVersion could not * find any child mba's from the passed in * target of type TYPE_MEMBUF */ l_errl = new ERRORLOG::ErrlEntry( ERRORLOG::ERRL_SEV_UNRECOVERABLE, fapi2::MOD_FAPI2_GET_ATTR_CEN_VPD_VERSION, fapi2::RC_NO_CHILD_MBA, l_type, TARGETING::get_huid(l_pTarget), hbSwError); rc.setPlatDataPtr(reinterpret_cast (l_errl)); FAPI_ERR("platGetMBvpdAttr: Could not find a child mba " "for the passed in membuf target." ); break; } //since we have to get the value from a child mba, try all //child mba's until successful. for(auto l_currentMba: l_mbaList) { fapi2::Target l_fapiTarget(l_currentMba); rc = getMBvpdAttr(l_fapiTarget, i_attr, o_pVal, i_valSize); if(rc == fapi2::FAPI2_RC_SUCCESS) { break; } } } else { fapi2::Target l_fapiTarget(l_pTarget); rc = getMBvpdAttr(l_fapiTarget, i_attr, o_pVal, i_valSize); } } } while(0); return rc; } //****************************************************************************** // fapi::platAttrSvc::getPllBucket function //****************************************************************************** ReturnCode getPllBucket(const Target& i_fapiTarget, uint8_t & o_bucket_val, const uint8_t i_index) { fapi2::ReturnCode l_rc; errlHndl_t l_errl = nullptr; TARGETING::Target * l_chipTarget = nullptr; l_errl = getTargetingTarget(i_fapiTarget, l_chipTarget); if(l_errl) { FAPI_ERR("getPllBucket: Error from getTargetingTarget"); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { l_errl = Util::getObusPllBucket(l_chipTarget, o_bucket_val, i_index); if (l_errl) { FAPI_ERR("getPllBucket: Error from getObusPllBucket"); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); } } return l_rc; } //----------------------------------------------------------------------------- ReturnCode platGetMBvpdSlopeInterceptData( const Target& i_fapiTarget, const uint32_t i_attr, uint32_t& o_val) { ReturnCode rc; // Don't need to check the type here, the FAPI_ATTR_GET macro clause // "fapi2::Target(TARGET)" does it for us. However, // to enable a streamlined dump of the attributes, all plat code must use // the generic TARGET_TYPE_ALL -- so convert back to the correct type // manually TARGETING::Target * l_pTarget = NULL; errlHndl_t l_errl = getTargetingTarget(i_fapiTarget, l_pTarget); if (l_errl) { FAPI_ERR("platGetMBvpdSPDXRecordVersion: " "Error from getTargetingTarget"); rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { MBvpdSlopeIntercept l_val; switch (i_attr) { case ATTR_CEN_CDIMM_VPD_MASTER_POWER_INTERCEPT: l_val = MASTER_POWER_INTERCEPT; break; case ATTR_CEN_CDIMM_VPD_MASTER_POWER_SLOPE: l_val = MASTER_POWER_SLOPE; break; case ATTR_CEN_CDIMM_VPD_MASTER_TOTAL_POWER_INTERCEPT: l_val = MASTER_TOTAL_POWER_INTERCEPT; break; case ATTR_CEN_CDIMM_VPD_MASTER_TOTAL_POWER_SLOPE: l_val = MASTER_TOTAL_POWER_INTERCEPT; break; case ATTR_CEN_CDIMM_VPD_SUPPLIER_POWER_INTERCEPT: l_val = SUPPLIER_POWER_INTERCEPT; break; case ATTR_CEN_CDIMM_VPD_SUPPLIER_POWER_SLOPE: l_val = SUPPLIER_POWER_SLOPE; break; case ATTR_CEN_CDIMM_VPD_SUPPLIER_TOTAL_POWER_INTERCEPT: l_val = SUPPLIER_TOTAL_POWER_INTERCEPT; break; case ATTR_CEN_CDIMM_VPD_SUPPLIER_TOTAL_POWER_SLOPE: l_val = SUPPLIER_TOTAL_POWER_SLOPE; break; default: l_val = MASTER_POWER_INTERCEPT; } fapi2::Target l_fapiTarget(l_pTarget); rc = getMBvpdSlopeInterceptData(l_fapiTarget, l_val, o_val); } return rc; } //****************************************************************************** // fapi::platAttrSvc::platGetFreqMcaMhz function //****************************************************************************** ReturnCode platGetFreqMcaMhz(const Target& i_fapiTarget, uint32_t & o_val) { // The POR config for Cumulus is to run the MC/DMI clocks directly // off of the NEST PLL in 'sync' mode. To support 'sync' mode FW // can pin ATTR_FREQ_MCA_MHZ == ATTR_FREQ_PB_MHZ. fapi2::ReturnCode l_rc; errlHndl_t l_errl = nullptr; TARGETING::Target * l_chipTarget = nullptr; l_errl = getTargetingTarget(i_fapiTarget, l_chipTarget); if(l_errl) { FAPI_ERR("platGetFreqMcaMhz: Error from getTargetingTarget"); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { o_val = l_chipTarget->getAttr(); } return l_rc; } //****************************************************************************** // fapi::platAttrSvc::platSetFreqMcaMhz function //****************************************************************************** ReturnCode platSetFreqMcaMhz(const Target& i_fapiTarget, uint32_t i_val) { fapi2::ReturnCode l_rc; TARGETING::Target * l_pTarget = NULL; errlHndl_t l_errl = getTargetingTarget(i_fapiTarget, l_pTarget); if (l_errl) { FAPI_ERR("platSetFreqMcaMhz: Error from getTargetingTarget"); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); } else { /*@ * @errortype * @moduleid fapi2::MOD_FAPI2_SET_ATTR_FREQ_MCA_MHZ * @reasoncode fapi2::RC_SET_ATTR_NOT_VALID * @userdata1 HUID * @userdata2 Requested attr value * @devdesc platSetFreqMcaMhz should never be called */ l_errl = new ERRORLOG::ErrlEntry( ERRORLOG::ERRL_SEV_UNRECOVERABLE, fapi2::MOD_FAPI2_SET_ATTR_FREQ_MCA_MHZ, fapi2::RC_SET_ATTR_NOT_VALID, TARGETING::get_huid(l_pTarget), i_val, true); FAPI_ERR("platSetFreqMcaMhz: Function should never be called"); l_rc.setPlatDataPtr(reinterpret_cast (l_errl)); } return l_rc; } } // End platAttrSvc namespace } // End fapi2 namespace