# IBM_PROLOG_BEGIN_TAG # This is an automatically generated prolog. # # $Source: src/kernel/start.S $ # # OpenPOWER HostBoot Project # # Contributors Listed Below - COPYRIGHT 2010,2016 # [+] International Business Machines Corp. # # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or # implied. See the License for the specific language governing # permissions and limitations under the License. # # IBM_PROLOG_END_TAG .include "kernel/ppcconsts.S" .section .text.intvects .global _start _start: ;// Set thread priority high. or 2,2,2 ;// Clear MSR[TA] (bit 1) and enable MSR[ME] (bit 51). mfmsr r2 rldicl r2,r2,1,1 ;// Clear bit 1 - result [1-63,0] rotrdi r2,r2,1 ;// Rotate right 1 - result [0,63] ori r2,r2,4096 ;// Set bit 51 ;// Set up SRR0 / SRR1 to enable new MSR. mtsrr1 r2 li r2, _start_postmsr@l mtsrr0 r2 rfid _start_postmsr: ;// Determine if this is the first thread. li r4, 2 ;// Read spinlock value. lis r2, kernel_other_thread_spinlock@h ori r2, r2, kernel_other_thread_spinlock@l lwsync 1: ldarx r3, 0, r2 cmpwi r3, 0 ;// Non-zero means this thread wasn't first. bnel cr0, _other_thread_spinlock stdcx. r4, 0, r2 ;// Attempt to store 2. bne 1b ;// Loop until sucessful at stwcx. isync b _main /* ;// Relocate code bl pre_relocate ;// fill LR with address pre_relocate: mflr r2 lis r1,0x0010 cmpl cr0,r2,r1 ;// Check LR is less than 1MB blt finished_relocate ;// No need to relocate if less than 1MB ;// Get addresses for relocation. ;// Write address in r5 ;// Read address in r1 li r5,0 lis r1, -1 ;// fill r1 with ffff..ff0000 and r1,r1,r2 ;// and with pre_relocate's address from r2 to get start of ;// rom section. ;// Update LR to low address. clrldi r2,r2,48 ;// Equiv to ~(0x0FFFF) mtlr 2 ;// Moving 1MB , so load r2 with (1MB / 8 bytes per word) lis r2, 0x2 mtctr r2 relocate_loop: ;// The dcbst/sync/icbi/isync sequence comes from PowerISA ld r4, 0(r1) std r4, 0(r5) dcbst 0,r5 sync icbi 0,r5 isync addi r1,r1,8 addi r5,r5,8 bdnz+ relocate_loop ;// Now that we've relocated, erase exception prefix. mfmsr r11 rldicl r11,r11,57,1 ;// Erase bit 6 ( equiv to r11 & ~(0x40)) rotldi r11,r11,7 mtmsr r11 ;// Jump to low address. blr finished_relocate: ;// Jump to main. b _main */ ;// Interrupt vectors. #define UNIMPL_INTERRUPT(name, address) \ .org _start + address; \ UNIMPL_INTERRUPT_NOADDR(name, address) #define UNIMPL_INTERRUPT_STUB(name, address) \ .org _start + address; \ b intvect_unimpl_##name; #define UNIMPL_INTERRUPT_NOADDR(name, address) \ intvect_unimpl_##name: \ or 2,2,2; /* Ensure thread priority is high. */ \ mtsprg0 r1; /* Save GRP1 */ \ li r1, address; /* Save exception address. */ \ mtsprg2 r1; /* Move exception address to SPRG2 */ \ ;/* Retrieve processing address for interrupt. */ \ lis r1, intvect_unhandled_finish_save@h; \ ori r1, r1, intvect_unhandled_finish_save@l; \ ;/* Save processing address in SPRG0 */ \ mtsprg0 r1; \ mfsprg1 r1; /* Restore GPR1 */ \ b kernel_save_task ; /* Save current task. */ #define STD_INTERRUPT(name, address) \ .org _start + address; \ STD_INTERRUPT_NOADDR(name) #define STD_INTERRUPT_STUB(name, address) \ .org _start + address; \ intvect_stub_##name: \ b intvect_##name; #define STD_INTERRUPT_NOADDR(name) \ intvect_##name: \ or 2,2,2; /* Ensure thread priority is high. */ \ mtsprg1 r1; /* Save GPR1 */ \ ;/* Retrieve processing address for interrupt. */ \ lis r1, intvect_##name##_finish_save@h; \ ori r1, r1, intvect_##name##_finish_save@l; \ ;/* Save interrupt address in SPRG0 */ \ mtsprg0 r1; \ mfsprg1 r1; /* Restore GPR1 */ \ b kernel_save_task ; /* Save current task. */ \ intvect_##name##_finish_save: \ ; /* Get TOC entry for kernel C function */ \ lis r2, kernel_execute_##name##@h; \ ori r2, r2, kernel_execute_##name##@l; \ ld r0, 0(r2); /* Load call address */ \ mtlr r0; \ ld r2, 8(r2); /* Load TOC base. */ \ blrl; /* Call kernel function */ \ nop; \ b kernel_dispatch_task; /* Return to task */ STD_INTERRUPT_STUB(system_reset, 0x100) .org _start + 0x180 intvect_inst_start: b _start STD_INTERRUPT(machine_check, 0x200) STD_INTERRUPT(data_storage, 0x300) STD_INTERRUPT(data_segment, 0x380) STD_INTERRUPT(inst_storage, 0x400) STD_INTERRUPT(inst_segment, 0x480) STD_INTERRUPT(external, 0x500) STD_INTERRUPT(alignment, 0x600) STD_INTERRUPT(prog_ex, 0x700) STD_INTERRUPT(fp_unavail, 0x800) STD_INTERRUPT(decrementer, 0x900) UNIMPL_INTERRUPT(hype_decrementer, 0x980) ;// System Call Exception Vector ;// ;// This exception vector implements the save/restore for normal system calls ;// that require C++ code for handling but also implements a fast-path for ;// some simple calls, such as reading protected SPRs. ;// ;// Since this is called from userspace as a function call (see __syscall* ;// functions) we only need to honor the ELF ABI calling conventions. That ;// means some registers and condition fields can be considered volatile and ;// modified prior to being saved. ;// .org _start + 0xC00 intvect_system_call_fast: cmpi cr0, r3, 0x0800 bge cr0, system_call_fast_path STD_INTERRUPT(system_call, 0xC08) UNIMPL_INTERRUPT_STUB(trace, 0xD00) UNIMPL_INTERRUPT_STUB(hype_data_storage, 0xE00) UNIMPL_INTERRUPT_STUB(hype_inst_storage, 0xE20) STD_INTERRUPT_STUB(hype_emu_assist, 0xE40) UNIMPL_INTERRUPT_STUB(hype_maint, 0xE60) UNIMPL_INTERRUPT_STUB(perf_monitor, 0xF00) UNIMPL_INTERRUPT_STUB(vector_unavail, 0xF20) UNIMPL_INTERRUPT_STUB(vsx_unavail, 0xF40) UNIMPL_INTERRUPT_STUB(fac_unavail, 0xF60) ;// P8 has a new HFSCR register which allows the hypervisor to disable ;// access to facilities such as floating point to a partition, even if ;// the partition enables via the MSR bits. Since the only of these ;// facilities we allow is FP, we'll just set the HFSCR bits here if we ;// get this exception. .org _start + 0xF80 hype_fac_unavail: mtspr HSPRG0, r0 ;// Free up a temporary register. mfspr r0,HFSCR ori r0, r0, 1 ;// Set FP=1 (bit 63). mtspr HFSCR, r0 mfspr r0, HSPRG0 ;// Restore temporary hrfid ;// Softpatch Exception Vector ;// ;// This exception vector implements the softpatch / denormalization assist ;// for certain floating point instructions which are unable to handle a ;// certain format of floating point numbers. The softpatch code will run ;// a denormalization assist procedure. ;// ;// The processor sets HSRR0/HSRR1 for this exception instead of SRR0/SRR1 ;// because it is a hypervisor-level exception. It is not possible for us ;// to be in exception state already when this exception is called (since ;// kernel code doesn't use floating-point), so it is safe to just move HSSR0 ;// onto SRR0 so that the normal save/restore code can be used. ;// ;// We also need to roll back the HSRR0 1 instruction (4 bytes) since the ;// HSRR0 gets set to the instruction after the exception according to the ;// P7 Book IV. .org _start + 0x1500 softpatch_stub: mtsprg1 r1 ;// Save of R1 temporarily. mfspr r1, HSRR0 ;// Move HSRR0 -> SRR0. subi r1, r1, 4 ;// Roll back SRR0 1 instruction to one taking except. mtsrr0 r1 mfsprg1 r1 ;// Restore R1 and use normal interrupt code. STD_INTERRUPT_NOADDR(softpatch) .section .text.kernelasm ;// Hostboot descriptor pointer. ;// ;// This must be the first entry in the .text.kernelasm section so that it ;// ends up at 0x2000 in our kernel image. kernel_descriptor: .byte 'H', 'O', 'S', 'T', 'B', 'O', 'O', 'T' .quad kernel_hbDescriptor ;// _main: ;// Set up stack and TOC and call kernel's main. _main: ;// Set up initial TOC Base lis r2, main@h ori r2, r2, main@l ld r2,8(r2) ;// Set up initial stack, space for 8 double-words lis r1, kernel_stack@h ori r1, r1, kernel_stack@l addi r1, r1, 16320 ;// Call main. bl main _main_loop: b _main_loop ;// _other_thread_spinlock: ;// Used for threads other than first to wait for the system to boot to a ;// stable point where we can start the other threads. At this point ;// nothing is initalized in the thread. _other_thread_spinlock: ;// Read spinlock value. lis r2, kernel_other_thread_spinlock@h ori r2, r2, kernel_other_thread_spinlock@l 1: ld r3, 0(r2) ;// Loop until value is 1... cmpi cr0, r3, 1 beq _other_thread_spinlock_complete or 1,1,1 ;// Lower thread priority. b 1b ;// Now released by primary thread. _other_thread_spinlock_complete: or 2,2,2 ;// Raise thread priority. isync ;// Get CPU object from thread ID. lis r2, _ZN10CpuManager7cv_cpusE@h ori r2, r2, _ZN10CpuManager7cv_cpusE@l mfspr r1, PIR ;// Extract node id. extrwi r1, r1, 3, 19 sldi r1, r1, 3 ldx r2, r1, r2 ;// Dereference to get on-node CPUs array. cmpi cr0, r2, 0 ;// Check for NULL node array. beq- 1f mfspr r1, PIR ;// Extract on-node CPU id. clrlslwi r1, r1, 22, 3 ldx r3, r1, r2 ;// Load CPU object. cmpi cr0, r3, 0 ;// Check for NULL CPU object. beq- 1f ld r1, CPU_KERNEL_STACK(r3) ;// Load initial stack. lis r2, smp_slave_main@h ;// Load TOC base. ori r2, r2, smp_slave_main@l ld r2, 8(r2) bl smp_slave_main ;// Call smp_slave_main b _main_loop 1: ;// No CPU object available, nap this CPU. ;// We should only get to this point on simics. SBE will only wake up ;// a single core / thread at a time and we are responsible for ;// further sequencing. nap b 1b ;// @fn kernel_save_task ;// Saves context to task structure and branches back to requested addr. ;// ;// Requires: ;// * SPRG3 -> Task Structure. ;// * SPRG0 -> Return address. ;// * SPRG1 -> Safe for scratch (temporary save of r1) kernel_save_task: mtsprg1 r1 ;// Save r1. mfsprg3 r1 ;// Get task structure. std r0, TASK_GPR_0(r1) ;// Save GPR0 mfsrr0 r0 std r0, TASK_NIP(r1) ;// Save NIP mflr r0 std r0, TASK_LR(r1) ;// Save LR mfcr r0 std r0, TASK_CR(r1) ;// Save CR mfctr r0 std r0, TASK_CTR(r1) ;// Save CTR mfxer r0 std r0, TASK_XER(r1) ;// Save XER mfsprg1 r0 std r0, TASK_GPR_1(r1) ;// Save GPR1 std r2, TASK_GPR_2(r1) ;// Save GPR2 std r3, TASK_GPR_3(r1) ;// Save GPR3 std r4, TASK_GPR_4(r1) ;// Save GPR4 std r5, TASK_GPR_5(r1) ;// Save GPR5 std r6, TASK_GPR_6(r1) ;// Save GPR6 std r7, TASK_GPR_7(r1) ;// Save GPR7 std r8, TASK_GPR_8(r1) ;// Save GPR8 std r9, TASK_GPR_9(r1) ;// Save GPR9 std r10, TASK_GPR_10(r1) ;// Save GPR10 std r11, TASK_GPR_11(r1) ;// Save GPR11 std r12, TASK_GPR_12(r1) ;// Save GPR12 std r13, TASK_GPR_13(r1) ;// Save GPR13 std r14, TASK_GPR_14(r1) ;// Save GPR14 std r15, TASK_GPR_15(r1) ;// Save GPR15 std r16, TASK_GPR_16(r1) ;// Save GPR16 std r17, TASK_GPR_17(r1) ;// Save GPR17 std r18, TASK_GPR_18(r1) ;// Save GPR18 std r19, TASK_GPR_19(r1) ;// Save GPR19 std r20, TASK_GPR_20(r1) ;// Save GPR20 std r21, TASK_GPR_21(r1) ;// Save GPR21 std r22, TASK_GPR_22(r1) ;// Save GPR22 std r23, TASK_GPR_23(r1) ;// Save GPR23 std r24, TASK_GPR_24(r1) ;// Save GPR24 std r25, TASK_GPR_25(r1) ;// Save GPR25 std r26, TASK_GPR_26(r1) ;// Save GPR26 std r27, TASK_GPR_27(r1) ;// Save GPR27 std r28, TASK_GPR_28(r1) ;// Save GPR28 std r29, TASK_GPR_29(r1) ;// Save GPR29 std r30, TASK_GPR_30(r1) ;// Save GPR30 std r31, TASK_GPR_31(r1) ;// Save GPR31 ld r2, TASK_FP_CONTEXT(r1) ;// Load FP Context pointer. cmpi cr0, r2, 0 bne- cr0, 1f ;// Jump to FP-save if != NULL. 2: ld r1, TASK_CPUPTR(r1) ;// Get CPU pointer ld r1, CPU_KERNEL_STACK(r1) ;// Get kernel stack pointer. mfsprg0 r0 ;// Retrieve return address from SPRG0 mtlr r0 ;// Call blr ;// Save FP context. 1: ;// Enable FP. mfmsr r3 ori r3,r3,0x2000 mtmsrd r3 ;// Save FPRs. stfd f0, TASK_FPR_0(r2) stfd f1, TASK_FPR_1(r2) stfd f2, TASK_FPR_2(r2) stfd f3, TASK_FPR_3(r2) stfd f4, TASK_FPR_4(r2) stfd f5, TASK_FPR_5(r2) stfd f6, TASK_FPR_6(r2) stfd f7, TASK_FPR_7(r2) stfd f8, TASK_FPR_8(r2) stfd f9, TASK_FPR_9(r2) stfd f10, TASK_FPR_10(r2) stfd f11, TASK_FPR_11(r2) stfd f12, TASK_FPR_12(r2) stfd f13, TASK_FPR_13(r2) stfd f14, TASK_FPR_14(r2) stfd f15, TASK_FPR_15(r2) stfd f16, TASK_FPR_16(r2) stfd f17, TASK_FPR_17(r2) stfd f18, TASK_FPR_18(r2) stfd f19, TASK_FPR_19(r2) stfd f20, TASK_FPR_20(r2) stfd f21, TASK_FPR_21(r2) stfd f22, TASK_FPR_22(r2) stfd f23, TASK_FPR_23(r2) stfd f24, TASK_FPR_24(r2) stfd f25, TASK_FPR_25(r2) stfd f26, TASK_FPR_26(r2) stfd f27, TASK_FPR_27(r2) stfd f28, TASK_FPR_28(r2) stfd f29, TASK_FPR_29(r2) stfd f30, TASK_FPR_30(r2) stfd f31, TASK_FPR_31(r2) ;// Save FPSRC mffs f0 stfd f0, TASK_FPSCR(r2) b 2b ;// @fn dispatch_task ;// Loads context from task structure and performs rfi. ;// ;// Requires: ;// * SPRG3 -> Task Structure. ;// * Current contents of registers are not needed. kernel_dispatch_task: .global kernel_dispatch_task mfsprg3 r1 ;// Load task structure to r1. ldarx r0, TASK_CPUPTR, r1 ;// Clear the reservation by loading / storing stdcx. r0, TASK_CPUPTR, r1 ;// the CPU pointer in the task. mfmsr r2 ;// Get current MSR ori r2,r2, 0xD030 ;// Enable MSR[EE,ME,PR,IR,DR]. rldicl r2,r2,50,1 ;// Clear ... rotldi r2,r2,14 ;// MSR[FP] ld r3, TASK_MSR_MASK(r1) ;// Load MSR mask. xor r2, r2, r3 ;// Apply MSR mask (XOR). mtsrr1 r2 ;// Set task MSR (SRR1) ld r2, TASK_NIP(r1) ;// Load NIP from context. mtsrr0 r2 ;// Set task NIP (SRR0) ;// Check if FP enabled, load context. ld r2, TASK_FP_CONTEXT(r1) cmpi cr0, r2, 0 bne- 1f 2: ;// Restore GPRs from context. ld r0, TASK_GPR_0(r1) ;// GPR0 ld r2, TASK_GPR_2(r1) ;// GPR2 ld r3, TASK_GPR_3(r1) ;// GPR3 ld r4, TASK_GPR_4(r1) ;// GPR4 ld r5, TASK_GPR_5(r1) ;// GPR5 ld r6, TASK_GPR_6(r1) ;// GPR6 ld r7, TASK_GPR_7(r1) ;// GPR7 ld r8, TASK_GPR_8(r1) ;// GPR8 ld r9, TASK_GPR_9(r1) ;// GPR9 ld r10, TASK_GPR_10(r1) ;// GPR10 ld r11, TASK_GPR_11(r1) ;// GPR11 ld r12, TASK_GPR_12(r1) ;// GPR12 ld r13, TASK_GPR_13(r1) ;// GPR13 ld r14, TASK_GPR_14(r1) ;// GPR14 ld r15, TASK_GPR_15(r1) ;// GPR15 ld r16, TASK_GPR_16(r1) ;// GPR16 ld r17, TASK_GPR_17(r1) ;// GPR17 ld r18, TASK_GPR_18(r1) ;// GPR18 ld r19, TASK_GPR_19(r1) ;// GPR19 ld r20, TASK_GPR_20(r1) ;// GPR20 ld r21, TASK_GPR_21(r1) ;// GPR21 ld r22, TASK_GPR_22(r1) ;// GPR22 ld r23, TASK_GPR_23(r1) ;// GPR23 ld r24, TASK_GPR_24(r1) ;// GPR24 ld r25, TASK_GPR_25(r1) ;// GPR25 ld r26, TASK_GPR_26(r1) ;// GPR26 ld r27, TASK_GPR_27(r1) ;// GPR27 ld r28, TASK_LR(r1) ;// Load from context: LR, CR, CTR, XER ld r29, TASK_CR(r1) ld r30, TASK_CTR(r1) ld r31, TASK_XER(r1) mtlr r28 ;// Restore LR mtcr r29 ;// Restore CR mtctr r30 ;// Restore CTR mtxer r31 ;// Restore XER ld r28, TASK_GPR_28(r1) ;// GPR28 ld r29, TASK_GPR_29(r1) ;// GPR29 ld r30, TASK_GPR_30(r1) ;// GPR30 ld r31, TASK_GPR_31(r1) ;// GPR31 ld r1, TASK_GPR_1(r1) ;// GPR1 rfid ;// Execute task. ;// Load FP context. 1: ;// Set MSR[FP] and also in SRR1. mfmsr r3 ori r3,r3,0x2000 mtmsrd r3 mfsrr1 r3 ori r3,r3,0x2000 mtsrr1 r3 ;// Restore FPSCR lfd f0, TASK_FPSCR(r2) mtfsf f0,f0,1,1 ;// Restore FPRs lfd f0, TASK_FPR_0(r2) lfd f1, TASK_FPR_1(r2) lfd f2, TASK_FPR_2(r2) lfd f3, TASK_FPR_3(r2) lfd f4, TASK_FPR_4(r2) lfd f5, TASK_FPR_5(r2) lfd f6, TASK_FPR_6(r2) lfd f7, TASK_FPR_7(r2) lfd f8, TASK_FPR_8(r2) lfd f9, TASK_FPR_9(r2) lfd f10, TASK_FPR_10(r2) lfd f11, TASK_FPR_11(r2) lfd f12, TASK_FPR_12(r2) lfd f13, TASK_FPR_13(r2) lfd f14, TASK_FPR_14(r2) lfd f15, TASK_FPR_15(r2) lfd f16, TASK_FPR_16(r2) lfd f17, TASK_FPR_17(r2) lfd f18, TASK_FPR_18(r2) lfd f19, TASK_FPR_19(r2) lfd f20, TASK_FPR_20(r2) lfd f21, TASK_FPR_21(r2) lfd f22, TASK_FPR_22(r2) lfd f23, TASK_FPR_23(r2) lfd f24, TASK_FPR_24(r2) lfd f25, TASK_FPR_25(r2) lfd f26, TASK_FPR_26(r2) lfd f27, TASK_FPR_27(r2) lfd f28, TASK_FPR_28(r2) lfd f29, TASK_FPR_29(r2) lfd f30, TASK_FPR_30(r2) lfd f31, TASK_FPR_31(r2) b 2b intvect_system_reset: ;// Need to identify reason for SRESET and then perform appropriate ;// action. ;// Current support: ;// - Initial sreset. ;// - Decrementer wake-up from nap. ;// - External interrupt from nap or winkle. ;// - IPI wake-up from winkle of slave core. ;// Raise priority to high. or 2,2,2 ;// Free up two registers temporarily. mtsprg0 r1 mtsprg1 r2 ;// Check spinlock for 0, which implies we haven't started yet. lis r2, kernel_other_thread_spinlock@h ori r2, r2, kernel_other_thread_spinlock@l ld r2, 0(r2) cmpi cr0, r2, 0 beq- _start ;// Get CPU object from thread ID, check for NULL which implies not ;// started yet. lis r2, _ZN10CpuManager7cv_cpusE@h ori r2, r2, _ZN10CpuManager7cv_cpusE@l mfspr r1, PIR ;// Extract node id. extrwi r1, r1, 3, 19 sldi r1, r1, 3 ldx r2, r1, r2 ;// Dereference to get on-node CPUs array. cmpi cr0, r2, 0 ;// Check for NULL node array. beq- _start mfspr r1, PIR ;// Extract on-node CPU id. clrlslwi r1, r1, 22, 3 ldx r2, r1, r2 ;// Load CPU object. cmpi cr0, r2, 0 ;// Check for NULL CPU object. beq- _start ;// Check for inactive CPU. ld r1, CPU_STATUS(r2) extrdi. r1, r1, 1, CPU_STATUS_ACTIVE beq- intvect_system_reset_inactive ;// Now we were an active processor so this must be a nap-wakeup. ;// Find bit 42:44 of SRR1 (reason for SRESET). mfsrr1 r2 extrdi r2, r2, 3, 42 ;// Check for decrementer (bits = 011). cmpi cr0, r2, 0x3 beq+ intvect_system_reset_decrementer ;// Check for external interrupt (bits = 010). cmpi cr0, r2, 0x4 beq+ intvect_system_reset_external ;// Check for HMI (bits = 101). cmpi cr0, r2, 0x5 beq+ 1f ;// Unable to handle HMI, jump to 'unknown reason'. 1: ;// Unknown reason, call as unhandled_exception. sldi r1, r2, 32 ;// Save 42:44 of SRR1 and ori r1, r1, 0x100 ;// SRESET address to mtsprg2 r1 ;// SPRG2 for unhandled_exception. ;/* Restore R2 and R1 */ mfsprg1 r2 mfsprg0 r1 ;/* Need to load unhandled_exception into SPRG0 for kernel_save_task */ mtsprg1 r1 ;/* Save off R1 again. */ lis r1, intvect_unhandled_finish_save@h ori r1, r1, intvect_unhandled_finish_save@l mtsprg0 r1; mfsprg1 r1; /* Restore GPR1 */ b kernel_save_task ; /* Save current task, call unhandled_exception */ ;// @fn intvect_system_reset_inactive ;// Handle SRESET on an inactive processor. ;// This is due to either instruction start or winkle-wakeup. intvect_system_reset_inactive: ;// Check winkle state in CPU. ld r1, CPU_STATUS(r2) extrdi. r1, r1, 1, CPU_STATUS_WINKLED beq+ _start ;// Now we are a winkled processor that is awoken. ld r1, CPU_KERNEL_STACK_BOTTOM(r2) ld r1, 0(r1) mtsprg3 r1 b kernel_dispatch_task ;// @fn intvect_system_reset_decrementer ;// Handle SRESET due to decrementer wake-up. ;// This is a wake-up from 'nap'. ;// ;// When entering nap, all thread-state is lost (GPRs, etc). In order ;// to execute nap the task had to first make a system call to raise ;// priviledge which has the side effect of saving state in the task ;// struct. None of the state can be changed by the nap instruction ;// itself. Therefore, we need to remove priviledge escalation, ;// increment the NIA (past the nap instruction), and execute the ;// post-task-save portion of the decrementer vector. intvect_system_reset_decrementer: ;// Clear MSR mask, since privilaged instruction was now executed (nap). mfsprg3 r1 ;// Load task structure to r1. li r2, 0 ;// Zero r2. std r2, TASK_MSR_MASK(r1) ;// Zero msr_mask. ;// Advance saved NIA (past nap). ld r2, TASK_NIP(r1) addi r2, r2, 4 std r2, TASK_NIP(r1) ;// Restore kernel stack. ld r1, TASK_CPUPTR(r1) ;// Get CPU pointer ld r1, CPU_KERNEL_STACK(r1) ;// Get kernel stack pointer. ;// Jump to post-save portion of decrementer. b intvect_decrementer_finish_save ;// @fn intvect_system_reset_external ;// Handle SRESET due to wake-up from external interrupt. ;// This is a wake-up from 'nap', but not due to the decrementer ;// itself firing. Therefore, leave 'nap' process state alone ;// including NIA and handle the external interrupt. intvect_system_reset_external: ;// Restore save registers. mfsprg0 r1 mfsprg1 r2 b intvect_external ;// @fn system_call_fast_path ;// Handle fast path system calls. ;// 0x800 = HMER read (HMER -> r3). ;// 0x801 = HMER write (r4 -> HMER). ;// 0x802 = SCRATCH read (r4 -> SPRC, SPRD -> r3). ;// 0x803 = SCRATCH write (r4 -> SPRC, r5 -> SPRD). ;// 0x804 = PVR read (PVR -> r3). system_call_fast_path: ;// Check if this is HMER read (0x800). ;// Compare was already done in system call path. bne cr0, 2f mfspr r3, HMER ;// Do XSCOM workaround for Errata HW822317. ;// If the done bit (10) is on in HMER, it could take another cycle ;// for any error status to show up. Perform another HMER read. rldicr. r0, r3, 10, 0 beq cr0, 1f ;// Done bit not set, jump to exit. mfspr r0, HMER ;// Read HMER again and OR results. or r3, r3, r0 ;// --- end workaround HW822317 b 1f ;// Jump to exit point. ;// Check if this is HMER write (0x801). 2: cmpi cr0, r3, 0x801 bne cr0, 3f mtspr HMER, r4 li r3, 0 b 1f ;// Jump to exit point. ;// Check if this is SCRATCH read (0x802). 3: cmpi cr0, r3, 0x802 bne cr0, 4f ;// Check for being on master processor. mfsprg3 r6 ;// Get task structure. ld r6, TASK_CPUPTR(r6) ;// Get CPU structure. ld r6, CPU_STATUS(r6) ;// Read master boolean. extrdi. r6, r6, 1, CPU_STATUS_MASTER beq cr0, 300f ;// Call TASK_MIGRATE_TO_MASTER if not on master. ;// Read scratch. mtspr SPRC, r4 isync mfspr r3, SPRD b 1f ;// Jump to exit point. ;// Migrate task via TASK_MIGRATE_TO_MASTER 300: ;// Roll back NIA one instruction. mfsrr0 r6 addi r6, r6, -4 mtsrr0 r6 ;// Move our syscall number to r6 (for TASK_MIGRATE_TO_MASTER handler). mr r6, r3 ;// Set up TASK_MIGRATE_TO_MASTER syscall number. li r3, 3 ;// Call back to syscall handler. b intvect_system_call ;// Check if this is SCRATCH write (0x803). 4: cmpi cr0, r3, 0x803 bne cr0, 5f ;// Check for master processor. mfsprg3 r6 ;// Get task structure. ld r6, TASK_CPUPTR(r6) ;// Get CPU structure. ld r6, CPU_STATUS(r6) ;// Read master boolean. extrdi. r6, r6, 1, CPU_STATUS_MASTER beq cr0, 300b ;// Call TASK_MIGRATE_TO_MASTER if not on master. ;// Write scratch. mtspr SPRC, r4 isync mtspr SPRD, r5 b 1f ;// Jump to exit point. ;// Check if this is PVR read (0x804). 5: cmpi cr0, r3, 0x804 bne cr0, 6f mfspr r3, PVR b 1f ;// Jump to exit point. ;// Invalid system call, loop for debug. 6: b 6b 1: rfid ;// Return from interrupt. ;// @fn userspace_task_entry ;// Stub to load the function address and TOC base from userspace and ;// jump to task entry point. Used so the kernel doesn't need to ;// dereference userspace addresses (which could be bad). ;// ;// Requires: ;// * GPR4 -> Function pointer. ;// * LR -> task_end stub. ;// * GPR3 -> Task argument. ;// * GPR1 -> Task stack pointer. ;// Results: ;// * TOC base -> GPR2 ;// * Function Address -> CTR ;// * GPR3 preserved. ;// * Initial stack-frame created. ;// * Branch to CTR (no link). .global userspace_task_entry userspace_task_entry: ;// Skip stack frame if GPR1 == NULL. cmpi cr0, r1, 0 beq- 1f ;// Create frame. ;// NULL back-chain + 48 bytes + quad-word alignment. See ABI. stdu r1, -56(r1) 1: ld r5, 0(r4) mtctr r5 ld r2, 8(r4) bctr ;// @fn task_end_stub ;// Stub to call a TASK_END syscall in the event that a task 'returns' from ;// its entry point. We cannot call task_end() directly because profiling ;// inserts garbage code into the task_end C function. .global task_end_stub task_end_stub: // Check for a NULL stack pointer and skip TLS cleanup. cmpi cr0, r1, 0 beq 1f // Check for a NULL TLS-context and skip TLS cleanup. ld r0, TASK_TLS_CONTEXT(r13) cmpi cr0, r0, 0 beq 1f // Save off r3. mr r31, r3 // Set up TOC for __tls_cleanup lis r2, __tls_cleanup@h ori r2, r2, __tls_cleanup@l ld r2, 8(r2) // Call __tls_cleanup mr r3, r0 bl __tls_cleanup // Restore r3. mr r3, r31 1: // Call task-end syscall. mr r4, r3 ;// Move current rc (r3) to status value (r4) li r3, 2 ;// TASK_END -> r3 (syscall number) sc ;// @fn intvect_unhandled_finish_save ;// Tail-end of a intvect_*_finish_save code block generated by ;// STD_INTERRUPT_NOADDR for use by the unhandled interrupt code. This is ;// used by the UNIMPL_INTERRUPT_* macros so that we have a single C ;// function to deal with the unhandled / unimplemented interrupt. intvect_unhandled_finish_save: \ ; /* Get TOC entry for kernel C function */ lis r2, kernel_execute_unhandled_exception@h; ori r2, r2, kernel_execute_unhandled_exception@l; ld r0, 0(r2); /* Load call address */ mtlr r0; ld r2, 8(r2); /* Load TOC base. */ blrl; /* Call kernel function */ nop; b kernel_dispatch_task; /* Return to task */ STD_INTERRUPT_NOADDR(hype_emu_assist) UNIMPL_INTERRUPT_NOADDR(trace, 0xD00) UNIMPL_INTERRUPT_NOADDR(hype_data_storage, 0xE00) UNIMPL_INTERRUPT_NOADDR(hype_inst_storage, 0xE20) UNIMPL_INTERRUPT_NOADDR(hype_maint, 0xE60) UNIMPL_INTERRUPT_NOADDR(perf_monitor, 0xF00) UNIMPL_INTERRUPT_NOADDR(vector_unavail, 0xF20) UNIMPL_INTERRUPT_NOADDR(vsx_unavail, 0xF40) UNIMPL_INTERRUPT_NOADDR(fac_unavail, 0xF60) ;// @fn kernel_execute_stop ;// ;// Saves kernel state into a specified task structure and then executes ;// the stop instruction. ;// ;// @param r3 - task_t* to save kernel state into. ;// .global kernel_execute_stop kernel_execute_stop: ;// Move save area to SPRG3 for kernel_save_task. mtsprg3 r3 ;// Copy LR to SRR0 (since that is where kernel_save_task gets it from). mflr r3 mtsrr0 r3 ;// Load stop instruction address into the "return to" address (SPRG0). lis r3, 1f@h ori r3, r3, 1f@l mtsprg0 r3 ;// Save kernel state. b kernel_save_task ;// Execute stop. 1: ;// Magic instruction(7015) to allow simics to trigger thread wakeup rlwimi r27,r27,0,6,23 ;// When GCC supports 'stop', you can use it .long 0x4C0002E4 .section .data .balign 1024 kernel_stack: .space 16*1024 .global kernel_other_thread_spinlock kernel_other_thread_spinlock: .space 8 .global hbi_ImageId hbi_ImageId: .space 128