/* IBM_PROLOG_BEGIN_TAG */ /* This is an automatically generated prolog. */ /* */ /* $Source: src/import/chips/p9/xip/p9_xip_image.h $ */ /* */ /* OpenPOWER HostBoot Project */ /* */ /* Contributors Listed Below - COPYRIGHT 2015,2018 */ /* [+] International Business Machines Corp. */ /* */ /* */ /* Licensed under the Apache License, Version 2.0 (the "License"); */ /* you may not use this file except in compliance with the License. */ /* You may obtain a copy of the License at */ /* */ /* http://www.apache.org/licenses/LICENSE-2.0 */ /* */ /* Unless required by applicable law or agreed to in writing, software */ /* distributed under the License is distributed on an "AS IS" BASIS, */ /* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or */ /* implied. See the License for the specific language governing */ /* permissions and limitations under the License. */ /* */ /* IBM_PROLOG_END_TAG */ /// \file p9_xip_image.h /// \brief definition of structs in sections /// /// Contains struct ProcSbeFixed which contains functions, rings and /// attributes whose pointers are stored in the fixed and fixed_toc section /// Everything related to creating and manipulating P9-XIP binary images // *INDENT-OFF* #ifndef __P9_XIP_IMAGE_H #define __P9_XIP_IMAGE_H /// Current version (fields, layout, sections) of the P9_XIP header /// /// If any changes are made to this file or to p9_xip_header.H, please update /// the header version and follow-up on all of the error messages. #define P9_XIP_HEADER_VERSION 9 /// \defgroup p9_xip_magic_numbers P9-XIP magic numbers /// /// An P9-XIP magic number is a 64-bit constant. The 4 high-order bytes /// contain the ASCII characters "XIP " and identify the image as a P9-XIP /// image, while the 4 low-order bytes identify the type of the image. /// /// @{ #ifdef __ASSEMBLER__ #define ULL(x) x #else #define ULL(x) x##ull #endif #define P9_XIP_MAGIC 0x58495020 // "XIP " #define P9_XIP_MAGIC_BASE ULL(0x5849502042415345) // "XIP BASE" #define P9_XIP_MAGIC_SEEPROM ULL(0x584950205345504d) // "XIP SEPM" #define P9_XIP_MAGIC_CENTAUR ULL(0x58495020434e5452) // "XIP CNTR" #define P9_XIP_MAGIC_HW ULL(0x5849502020204857) // "XIP HW" #define P9_XIP_MAGIC_SGPE ULL(0x5849502053475045) // "XIP SGPE" #define P9_XIP_MAGIC_RESTORE ULL(0x5849502052455354) // "XIP REST" #define P9_XIP_MAGIC_CME ULL(0x5849502020434d45) // "XIP CME" #define P9_XIP_MAGIC_PGPE ULL(0x5849502050475045) // "XIP PGPE" #define P9_XIP_MAGIC_IOPPE ULL(0x5849502049505045) // "XIP IPPE" #define P9_XIP_MAGIC_FPPE ULL(0x5849502046505045) // "XIP FPPE" /// @} /// \defgroup p9_xip_sections P9-XIP Image Section Indexes /// /// These constants define the order that the P9XipSection structures appear /// in the header, which is not necessarily the order the sections appear in /// the binary image. Given that P9-XIP image contents are tightly /// controlled, we use this simple indexing scheme for the allowed sections /// rather than a more general approach, e.g., allowing arbitrary sections /// identified by their names. /// /// @{ // fixed number of entries in section table including common and // image-specific sections #define P9_XIP_SECTIONS 15 // this ensures that common sections go first followed by image-specific // sections, to be used to define image-specific sections #define P9_XIP_SECTIONS_PLUS(num) (P9_XIP_SECTIONS_COMMON + num) #ifndef __ASSEMBLER__ // List of image section types supported in the XIP image typedef enum { IST_XIP, // A legacy XIP image IST_TOR, // A standalone TOR ring section image IST_DDCO, // A standalone DD level container NOOF_IST, IST_UNDEFINED = 0xff } image_section_type_t; // These are the common P9-XIP sections defined for every image typedef enum { P9_XIP_SECTION_HEADER = 0, P9_XIP_SECTION_FIXED = 1, P9_XIP_SECTION_FIXED_TOC = 2, P9_XIP_SECTION_TOC = 3, P9_XIP_SECTION_STRINGS = 4, P9_XIP_SECTIONS_COMMON = 5 // total number of common sections } p9_xip_section_common_t; /// Applications can expand this macro to create an array of section names. #define P9_XIP_SECTION_NAMES_COMMON \ ".header", \ ".fixed", \ ".fixedtoc", \ ".toc", \ ".strings" #define P9_XIP_SECTION_NAMES(var, ...) \ const char* var[] = { \ P9_XIP_SECTION_NAMES_COMMON, \ __VA_ARGS__ \ } /// Applications can use this macro to safely index the array of section /// names. #define P9_XIP_SECTION_NAME(var, n) \ ((((n) < 0) || ((n) >= (int)(sizeof(var) / sizeof(char*)))) ? \ "" : var[n]) #endif /* __ASSEMBLER__ */ /// @} /// \defgroup p9_xip_validate() ignore masks. /// /// These defines, when matched in p9_xip_validate(), cause the validation /// to skip the check of the corresponding property. The purpose is to more /// effectively debug images that may be damaged and which have excess info /// before or after the image. The latter will be the case when dumping the /// image as a memory block without knowing where the image starts and ends. /// /// @{ #define P9_XIP_IGNORE_FILE_SIZE (uint32_t)0x00000001 #define P9_XIP_IGNORE_ALL (uint32_t)0x80000000 /// @} /// Maximum section alignment for P9-XIP sections #define P9_XIP_MAX_SECTION_ALIGNMENT 128 /// \defgroup p9_xip_toc_types P9-XIP Table of Contents data types /// /// These are the data types stored in the \a iv_type field of the P9XipToc /// objects. These must be defined as manifest constants because they are /// required to be recognized as manifest constants in C (as opposed to C++) /// code. /// /// NB: The 0x0 code is purposefully left undefined to catch bugs. /// /// @{ /// Data is a single unsigned byte #define P9_XIP_UINT8 0x01 /// Data is a 16-bit unsigned integer #define P9_XIP_UINT16 0x02 /// Data is a 32-bit unsigned integer #define P9_XIP_UINT32 0x03 /// Data is a 64-bit unsigned integer #define P9_XIP_UINT64 0x04 /// Data is a single signed byte #define P9_XIP_INT8 0x05 /// Data is a 16-bit signed integer #define P9_XIP_INT16 0x06 /// Data is a 32-bit signed integer #define P9_XIP_INT32 0x07 /// Data is a 64-bit signed integer #define P9_XIP_INT64 0x08 /// Data is a 0-byte terminated ASCII string #define P9_XIP_STRING 0x09 /// Data is an address #define P9_XIP_ADDRESS 0x0A /// The maximum type number #define P9_XIP_MAX_TYPE_INDEX 0x0A /// Applications can expand this macro to get access to string forms of the /// P9-XIP data types if desired. #define P9_XIP_TYPE_STRINGS(var) \ const char* var[] = { \ "Illegal 0 Code", \ "P9_XIP_UINT8", \ "P9_XIP_UINT16", \ "P9_XIP_UINT32", \ "P9_XIP_UINT64", \ "P9_XIP_INT8", \ "P9_XIP_INT16", \ "P9_XIP_INT32", \ "P9_XIP_INT64", \ "P9_XIP_STRING", \ "P9_XIP_ADDRESS", \ } /// Applications can expand this macro to get access to abbreviated string /// forms of the P9-XIP data types if desired. #define P9_XIP_TYPE_ABBREVS(var) \ const char* var[] = { \ "Illegal 0 Code", \ "u8 ", \ "u16", \ "u32", \ "u64", \ "i8 ", \ "i16", \ "i32", \ "i64", \ "str", \ "adr", \ } /// Applications can use this macro to safely index either array of P9-XIP /// type strings. #define P9_XIP_TYPE_STRING(var, n) \ (((n) > (sizeof(var) / sizeof(char*))) ? \ "Invalid P9-XIP type specification" : var[n]) /// @} /// Final alignment constraint for P9-XIP images. /// /// images are required to be multiples of 8 bytes in length, to /// gaurantee that the something will be able to complete any 8-byte load/store. #define P9_XIP_FINAL_ALIGNMENT 8 //////////////////////////////////////////////////////////////////////////// // C Definitions //////////////////////////////////////////////////////////////////////////// #ifndef __ASSEMBLER__ #ifdef _WIN32 #include "win32_stdint.h" #else #include #endif #include #include #ifdef __cplusplus extern "C" { #endif #if 0 } /* So __cplusplus doesn't mess w/auto-indent */ #endif /// P9-XIP Section information /// /// This structure defines the data layout of section table entries in the /// P9-XIP image header. // -*- DO NOT REORDER OR EDIT THIS STRUCTURE DEFINITION WITHOUT ALSO -*- // -*- EDITING THE ASSEMBLER LAYOUT IN p9_xip_header.H -*- typedef struct { /// The offset (in bytes) of the section from the beginning of the image /// /// In normalized images the section offset will always be 0 if the /// section size is also 0. uint32_t iv_offset; /// The size of the section in bytes, exclusive of alignment padding /// /// This is the size of the program-significant data in the section, /// exclusive of any alignment padding or reserved or extra space. The /// alignment padding (reserved space) is not represented explicitly, but /// is only implied by the offset of any subsequent non-empty section, or /// in the case of the final section in the image, the image size. /// /// Regardless of the \a iv_offset, if the \a iv_size of a section is 0 it /// should be considered "not present" in the image. In normalized images /// the section offset will always be 0 if the section size is also 0. uint32_t iv_size; /// The required initial alignment for the section offset /// /// The image and the applications using P9-XIP images have strict /// alignment/padding requirements. The image does not handle any type of /// unaligned instruction or data fetches. Some sections and subsections /// must also be POWER cache-line aligned. The \a iv_alignment applies to /// the first byte of the section. image images are also required to be /// multiples of 8 bytes in length, to gaurantee that the something will be /// able to complete any 8-byte load/store. These constraints are checked /// by p9_xip_validate() and enforced by p9_xip_append(). The alignment /// constraints may force a section to be padded, which may create "holes" /// in the image as explained in the comments for the \a iv_size field. /// /// Note that alignment constraints are always checked relative to the /// first byte of the image for in-memory images, not relative to the host /// address. Alignment specifications are required to be a power-of-2. uint8_t iv_alignment; /// Indicate if section has DD-level support. This value must be set /// to either 1 for true or 0 for false (default). uint8_t iv_ddSupport; /// Reserved structure alignment padding; Pad to 12 bytes uint8_t iv_reserved8[2]; } P9XipSection; /// The P9XipSection structure is created by assembler code and is expected /// to have the same size in C code. This constraint is checked in /// p9_xip_validate(). #define SIZE_OF_P9_XIP_SECTION 12 /// P9-XIP binary image header /// /// This header occupies the initial bytes of a P9-XIP binary image. /// The header contents are documented here, however the structure is actually /// defined in the file p9_xip_header.S, and these two definitions must be /// kept consistent. /// /// The header is a fixed-format representation of the most critical /// information about the image. The large majority of information about the /// image and its contents are available through the searchable table of /// contents. image code itself normally accesses the data directly through /// global symbols. /// /// The header only contains information 1) required by OTPROM code (e.g., the /// entry point); 2) required by search and updating APIs (e.g., the /// locations and sizes of all of the sections.); a few pieces of critical /// meta-data (e.g., information about the image build process). /// /// Any entries that are accessed by image code are required to be 64 bits, and /// will appear at the beginning of the header. /// /// The header also contains bytewise offsets and sizes of all of the sections /// that are assembled to complete the image. The offsets are relative to the /// start of the image (where the header is loaded). The sizes include any /// padding inserted by the link editor to guarantee section alignment. /// /// Every field of the header is also accesssible through the searchable table /// of contents as documented in p9_xip_header.S. // -*- DO NOT REORDER OR EDIT THIS STRUCTURE DEFINITION WITHOUT ALSO -*- // -*- EDITING THE ASSEMBLER LAYOUT IN p9_xip_header.S, AND WITHOUT -*- // -*- UPDATING THE p9_xip_translate_header() API IN p9_xip_image.c. -*- typedef struct { ////////////////////////////////////////////////////////////////////// // Identification - 8-byte aligned; 8 entries ////////////////////////////////////////////////////////////////////// /// Contains P9_XIP_MAGIC to identify a P9-XIP image uint64_t iv_magic; /// The entry address of the L1 loader entry point in SEEPROM uint64_t iv_L1LoaderAddr; /// The entry address of the L2 loader entry point in SRAM uint64_t iv_L2LoaderAddr; /// The entry address of Kernel in SRAM uint64_t iv_kernelAddr; /// The base address used to link the image, as a full relocatable image /// address uint64_t iv_linkAddress; /// Reserved for future expansion uint64_t iv_reserved64[3]; ////////////////////////////////////////////////////////////////////// // Section Table - 4-byte aligned; 15 entries ////////////////////////////////////////////////////////////////////// P9XipSection iv_section[P9_XIP_SECTIONS]; ////////////////////////////////////////////////////////////////////// // Other information - 4-byte aligned; 8 entries ////////////////////////////////////////////////////////////////////// /// The size of the image (including padding) in bytes uint32_t iv_imageSize; /// Build date generated in yyyymmdd format, e.g., 20110630 uint32_t iv_buildDate; /// Build time generated in hhmm format, e.g., 0756 uint32_t iv_buildTime; /// Build tag, generated when releasing this image to fw char iv_buildTag[20]; ////////////////////////////////////////////////////////////////////// // Other Information - 1-byte aligned; 8 entries ////////////////////////////////////////////////////////////////////// /// Header format version number uint8_t iv_headerVersion; /// Indicates whether the image has been normalized (0/1) uint8_t iv_normalized; /// Indicates whether the TOC has been sorted to speed searching (0/1) uint8_t iv_tocSorted; /// Reserved for future expansion uint8_t iv_reserved8[5]; ////////////////////////////////////////////////////////////////////// // Strings; 64 characters allocated ////////////////////////////////////////////////////////////////////// /// Build user, generated by `id -un` char iv_buildUser[16]; /// Build host, generated by `hostname` char iv_buildHost[40]; /// Reserved for future expansion char iv_reservedChar[8]; } P9XipHeader; /// A C-structure form of the P9-XIP Table of Contents (TOC) entries /// /// The .toc section consists entirely of an array of these structures. /// TOC entries are never accessed by image code. /// /// These structures store indexing information for global data required to be /// manipulated by external tools. The actual data is usually allocated in a /// data section and manipulated by the SBE code using global or local symbol /// names. Each TOC entry contains a pointer to a keyword string naming the /// data, the address of the data (or the data itself), the data type, /// meta-information about the data, and for vectors the vector size. // -*- DO NOT REORDER OR EDIT THIS STRUCTURE DEFINITION WITHOUT ALSO -*- // -*- EDITING THE ASSEMBLER MACROS (BELOW) THAT CREATE THE TABLE OF -*- // -*- CONTENTS ENTRIES. -*- typedef struct { /// A pointer to a 0-byte terminated ASCII string identifying the data. /// /// When allocated by the .xip_toc macro this is a pointer to the string /// form of the symbol name for the global or local symbol associated with /// the data which is allocated in the .strings section. This pointer is /// not aligned. /// /// When the image is normalized this pointer is replaced by the offset of /// the string in the .strings section. uint32_t iv_id; /// A 32-bit pointer locating the data /// /// This field is initially populated by the link editor. For scalar, /// vector and string types this is the final relocated address of the /// first byte of the data. For address types, this is the relocated /// address. When the image is normalized, these addresses are converted /// into the equivalent offsets from the beginning of the section holding /// the data. uint32_t iv_data; /// The type of the data; See \ref p9_xip_toc_types. uint8_t iv_type; /// The section containing the data; See \ref p9_xip_sections. uint8_t iv_section; /// The number of elements for vector types, otherwise 1 for scalar types /// and addresses. /// /// Vectors are naturally limited in size, e.g. to the number of cores, /// chips in a node, DD-levels etc. If \a iv_elements is 0 then no bounds /// checking is done on get/set accesses of the data. uint8_t iv_elements; /// Structure alignment padding; Pad to 12 bytes uint8_t iv_pad; } P9XipToc; /// The P9XipToc structure is created by assembler code and is expected /// to have the same size in C code. This constraint is checked in /// p9_xip_validate(). #define SIZE_OF_P9_XIP_TOC 12 /// A C-structure form of hashed P9-XIP Table of Contents (TOC) entries /// /// This structure was introduced in order to allow a small TOC for the .fixed /// section to support minimum-sized SEEPROM images in which the global TOC /// and all strings have been stripped out. In this structure the index /// string has been replaced by a 32-bit hash, and there is no longer a record /// of the original data name other then the hash. The section of the data is /// assumed to be .fixed, with a maximum 16-bit offset. /// /// These structures are created when entries are made in the .fixed section. /// They are created empty, then filled in during image normalization. /// /// This structure allows the p9_xip_get*() and p9_xip_set*() APIs to work /// even on highly-stripped SEEPROM images. typedef struct { /// A 32-bit hash (FNV-1a) of the Id string. uint32_t iv_hash; /// The offset in bytes from the start of the (implied) section of the data uint16_t iv_offset; /// The type of the data; See \ref p9_xip_toc_types. uint8_t iv_type; /// The number of elements for vector types, otherwise 1 for scalar types /// and addresses. /// /// Vectors are naturally limited in size, e.g. to the number of cores, /// chips in a node, DD-levels etc. If \a iv_elements is 0 then no bounds /// checking is done on get/set accesses of the data. uint8_t iv_elements; } P9XipHashedToc; /// The P9XipHashedToc structure is created by assembler code and is expected /// to have the same size in C code. This constraint is checked in /// p9_xip_validate(). #define SIZE_OF_P9_XIP_HASHED_TOC 8 /// A decoded TOC entry for use by applications /// /// This structure is a decoded form of a normalized TOC entry, filled in by /// the p9_xip_decode_toc() and p9_xip_find() APIs. This structure is /// always returned with data elements in host-endian format. /// /// In the event that the TOC has been removed from the image, this structure /// will also be returned by p9_xip_find() with information populated from /// the .fixed_toc section if possible. In this case the field \a iv_partial /// will be set and only the fields \a iv_address, \a iv_imageData, \a iv_type /// and \a iv_elements will be populated (all other fields will be set to 0). /// /// \note Only special-purpose applications will ever need to use this /// structure given that the higher-level APIs p9_xip_get_*() and /// p9_xip_set_*() are provided and should be used if possible, especially /// given that the information may be truncated as described above. typedef struct { /// A pointer to the associated TOC entry as it exists in the image /// /// If \a iv_partial is set this field is returned as 0. P9XipToc* iv_toc; /// The full relocatable image address /// /// All relocatable addresses are computed from the \a iv_linkAddress /// stored in the header. For scalar and string data, this is the /// relocatable address of the data. For address-only entries, this is /// the indexed address itself. uint64_t iv_address; /// A host pointer to the first byte of text or data within the image /// /// For scalar or string types this is a host pointer to the first byte of /// the data. For code pointers (addresses) this is host pointer to the /// first byte of code. Note that any use of this field requires the /// caller to handle conversion of the data to host endian-ness if /// required. Only 8-bit and string data can be used directly on all /// hosts. void* iv_imageData; /// The item name /// /// This is a pointer in host memory to a string that names the TOC entry /// requested. This field is set to a pointer to the ID string of the TOC /// entry inside the image. If \a iv_partial is set this field is returned /// as 0. char* iv_id; /// The data type, one of the P9_XIP_* constants uint8_t iv_type; /// The number of elements in a vector /// /// This field is set from the TOC entry when the TOC entry is /// decoded. This value is stored as 1 for scalar declarations, and may be /// set to 0 for vectors with large or undeclared sizes. Otherwise it is /// used to bounds check indexed accesses. uint8_t iv_elements; /// Is this record only partially populated? /// /// This field is set to 0 normally, and only set to 1 if a lookup is made /// in an image that only has the fixed TOC and the requested Id hashes to /// the fixed TOC. uint8_t iv_partial; } P9XipItem; /// Validate a P9-XIP image /// /// \param[in] i_image A pointer to a P9-XIP image in host memory. /// /// \param[in] i_size The putative size of the image /// /// \param[in] i_maskIgnores Array of ignore bits representing which properties /// should not be checked for in p9_xip_validate2(). /// /// This API should be called first by all applications that manipulate /// P9-XIP images in host memory. The magic number is validated, and /// the image is checked for consistency of the section table and table of /// contents. The \a iv_imageSize field of the header must also match the /// provided \a i_size parameter. Validation does not modify the image. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_validate(void* i_image, const uint32_t i_size); int p9_xip_validate2(void* i_image, const uint32_t i_size, const uint32_t i_maskIgnores); /// Normalize the P9-XIP image /// /// \param[in] io_image A pointer to a P9-XIP image in host memory. The /// image is assumed to be consistent with the information contained in the /// header regarding the presence of and sizes of all sections. /// /// P9-XIP images must be normalized before any other APIs are allowed to /// operate on the image. Since normalization modifies the image, an explicit /// call to normalize the image is required. Briefly, normalization modifies /// the TOC entries created by the final link to simplify search, updates, /// modification and relocation of the image. Normalization is explained in /// the written documentation of the P9-XIP binary format. Normalization does /// not modify the size of the image. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_normalize(void* io_image); /// Return the size of a P9-XIP image from the image header /// /// \param[in] i_image A pointer to a P9-XIP image in host memory. The /// image is assumed to be consistent with the information contained in the /// header regarding the presence of and sizes of all sections. /// /// \param[out] o_size A pointer to a variable returned as the size of the /// image in bytes, as recorded in the image header. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_image_size(void* i_image, uint32_t* o_size); /// Locate a section table entry and translate into host format /// /// \param[in] i_image A pointer to a P9-XIP image in host memory. /// /// \param[in] i_sectionId Identifies the section to be queried. See \ref /// p9_xip_sections. /// /// \param[out] o_hostSection Updated to contain the section table entry /// translated to host byte order. /// /// \param[in] i_ddLevel Specified the DD level of the sub-section within /// the XIP section to be extracted. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_get_section(const void* i_image, const int i_sectionId, P9XipSection* o_hostSection, #if defined(__PPE__) uint8_t i_ddLevel); #else uint8_t i_ddLevel=UNDEFINED_DD_LEVEL); #endif /// Endian translation of a P9XipHeader object /// /// \param[out] o_hostHeader The destination object. /// /// \param[in] i_imageHeader The source object. /// /// Translation of a P9XipHeader includes translation of all data members /// including traslation of the embedded section table. This translation /// works even if \a o_src == \a o_dest, i.e., in the destructive case. void p9_xip_translate_header(P9XipHeader* o_hostHeader, const P9XipHeader* i_imageHeader); /// Get scalar data from a P9-XIP image /// /// \param[in] i_image A pointer to a P9-XIP image in host memory. The /// image is assumed to be consistent with the information contained in the /// header regarding the presence of and sizes of all sections. The image is /// also required to have been normalized. /// /// \param[in] i_id A pointer to a 0-terminated ASCII string naming the item /// requested. /// /// \param[out] o_data A pointer to an 8-byte integer to receive the scalar /// data. Assuming the item is located this variable is assigned by the call. /// In the event of an error the final state of \a o_data is not specified. /// /// This API searches the P9-XIP Table of Contents (TOC) for the item named /// \a i_id, assigning \a o_data from the image if the item is found and is a /// scalar value. Scalar values include 8- 32- and 64-bit integers and image /// addresses. Image data smaller than 64 bits are extracted as unsigned /// types, and it is the caller's responsibility to cast or convert the /// returned data as appropriate. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_get_scalar(void* i_image, const char* i_id, uint64_t* o_data); /// Get endianness converted value from the P9-XIP image toc data /// /// \param[in] i_item - decoded toc entry /// \param[out] o_data A pointer to an 8-byte integer to receive the scalar /// data. Assuming the item is located this variable is assigned by the call. /// In the event of an error the final state of \a o_data is not specified. /// /// \param[in] i_index The index of the vector element to return. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_get_item(const P9XipItem *i_item, uint64_t* o_data, uint32_t i_index); /// Get an integral element from a vector held in a P9-XIP image /// /// \param[in] i_image A pointer to a P9-XIP image in host memory. The /// image is assumed to be consistent with the information contained in the /// header regarding the presence of and sizes of all sections. The image is /// also required to have been normalized. /// /// \param[in] i_id A pointer to a 0-terminated ASCII string naming the item /// requested. /// /// \param[in] i_index The index of the vector element to return. /// /// \param[out] o_data A pointer to an 8-byte integer to receive the /// data. Assuming the item is located this variable is assigned by the call. /// In the event of an error the final state of \a o_data is not specified. /// /// This API searches the P9-XIP Table of Contents (TOC) for the \a i_index /// element of the item named \a i_id, assigning \a o_data from the image if /// the item is found, is a vector of an integral type, and the \a i_index is /// in bounds. Vector elements smaller than 64 bits are extracted as unsigned /// types, and it is the caller's responsibility to cast or convert the /// returned data as appropriate. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_get_element(void* i_image, const char* i_id, const uint32_t i_index, uint64_t* o_data); /// Get string data from a P9-XIP image /// /// \param[in] i_image A pointer to a P9-XIP image in host memory. The /// image is assumed to be consistent with the information contained in the /// header regarding the presence of and sizes of all sections. The image is /// also required to have been normalized. /// /// \param[in] i_id A pointer to a 0-terminated ASCII string naming the item /// requested. /// /// \param[out] o_data A pointer to a character pointer. Assuming the /// item is located this variable is assigned by the call to point to the /// string as it exists in the \a i_image. In the event of an error the final /// state of \a o_data is not specified. /// /// This API searches the P9-XIP Table of Contents (TOC) for the item named /// \a i_id, assigning \a o_data if the item is found and is a string. It is /// the caller's responsibility to copy the string from the \a i_image memory /// space if necessary. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_get_string(void* i_image, const char* i_id, char** o_data); /// Directly read 64-bit data from the image based on a image address /// /// \param[in] i_image A pointer to a P9-XIP image in host memory. The /// image is assumed to be consistent with the information contained in the /// header regarding the presence of and sizes of all sections. /// /// \param[in] i_imageAddress A relocatable IMAGE address contained in the /// image, presumably of an 8-byte data area. The \a i_imageAddress is /// required to be 8-byte aligned, otherwise the P9_XIP_ALIGNMENT_ERROR code /// is returned. /// /// \param[out] o_data The 64 bit data in host format that was found at \a /// i_imageAddress. /// /// This API is provided for applications that need to manipulate P9-XIP /// images in terms of their relocatable IMAGE addresses. The API checks that /// the \a i_imageAddress is properly aligned and contained in the image, then /// reads the contents of \a i_imageAddress into \a o_data, performing /// image-to-host endianess conversion if required. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_read_uint64(const void* i_image, const uint64_t i_imageAddress, uint64_t* o_data); /// Set scalar data in a P9-XIP image /// /// \param[in,out] io_image A pointer to a P9-XIP image in host memory. /// The image is assumed to be consistent with the information contained in /// the header regarding the presence of and sizes of all sections. The image /// is also required to have been normalized. /// /// \param[in] i_id A pointer to a 0-terminated ASCII string naming the item /// to be modified. /// /// \param[in] i_data The new scalar data. /// /// This API searches the P9-XIP Table of Contents (TOC) for the item named /// by \a i_id, updating the image from \a i_data if the item is found, has /// a scalar type and can be modified. For this API the scalar types include /// 8- 32- and 64-bit integers. Although IMAGE addresses are considered a /// scalar type for p9_xip_get_scalar(), IMAGE addresses can not be modified /// by this API. The caller is responsible for ensuring that the \a i_data is /// of the correct size for the underlying data element in the image. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_set_scalar(void* io_image, const char* i_id, const uint64_t i_data); /// Set an integral element in a vector held in a P9-XIP image /// /// \param[in] i_image A pointer to a P9-XIP image in host memory. The /// image is assumed to be consistent with the information contained in the /// header regarding the presence of and sizes of all sections. The image is /// also required to have been normalized. /// /// \param[in] i_id A pointer to a 0-terminated ASCII string naming the item /// to be updated. /// /// \param[in] i_index The index of the vector element to update. /// /// \param[out] i_data The new vector element. /// /// This API searches the P9-XIP Table of Contents (TOC) for the \a i_index /// element of the item named \a i_id, update the image from \a i_data if the /// item is found, is a vector of an integral type, and the \a i_index is in /// bounds. The caller is responsible for ensuring that the \a i_data is of /// the correct size for the underlying data element in the image. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_set_element(void* i_image, const char* i_id, const uint32_t i_index, const uint64_t i_data); /// Set string data in a P9-XIP image /// /// \param[in,out] io_image A pointer to a P9-XIP image in host memory. The /// image is assumed to be consistent with the information contained in the /// header regarding the presence of and sizes of all sections. The image is /// also required to have been normalized. /// /// \param[in] i_id A pointer to a 0-terminated ASCII string naming the item /// to be modified. /// /// \param[in] i_data A pointer to the new string data. /// /// This API searches the P9-XIP Table of Contents (TOC) for the item named /// \a i_id, which must be a string variable. If found, then the string data /// in the image is overwritten with \a i_data. Strings are held 0-terminated /// in the image, and the P9-XIP format does not maintain a record of the /// amount of memory allocated for an individual string. If a string is /// overwritten by a shorter string then the 'excess' storage is effectively /// lost. If the length of \a i_data is longer that the current strlen() of /// the string data then \a i_data is silently truncated to the first /// strlen(old_string) characters. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_set_string(void* io_image, const char* i_id, const char* i_data); /// Directly write 64-bit data into the image based on a IMAGE address /// /// \param[in, out] io_image A pointer to a P9-XIP image in host memory. The /// image is assumed to be consistent with the information contained in the /// header regarding the presence of and sizes of all sections. /// /// \param[in] i_imageAddress A relocatable IMAGE address contained in the /// image, presumably of an 8-byte data area. The \a i_imageAddress is /// required to be 8-byte aligned, otherwise the P9_XIP_ALIGNMENT_ERROR code /// is returned. /// /// \param[in] i_data The 64 bit data in host format to be written to \a /// i_imageAddress. /// /// This API is provided for applications that need to manipulate P9-XIP /// images in terms of their relocatable IMAGE addresses. The API checks that /// the \a i_imageAddress is properly aligned and contained in the image, then /// updates the contents of \a i_imageAddress with \a i_data, performing /// host-to-image endianess conversion if required. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_write_uint64(void* io_image, const uint64_t i_imageAddress, const uint64_t i_data); /// Map over a P9-XIP image Table of Contents /// /// \param[in,out] io_image A pointer to a P9-XIP image in host memory. The /// image is assumed to be consistent with the information contained in the /// header regarding the presence of and sizes of all sections. The image is /// also required to have been normalized. /// /// \param[in] i_fn A pointer to a function to call on each TOC entry. The /// function has the prototype: /// /// \code /// int (*i_fn)(void* io_image, /// const P9XipItem* i_item, /// void* io_arg) /// \endcode /// /// \param[in,out] io_arg The private argument of \a i_fn. /// /// This API iterates over each entry of the TOC, calling \a i_fn with /// pointers to the image, a P9XipItem* pointer, and a private argument. The /// iteration terminates either when all TOC entries have been mapped, or \a /// i_fn returns a non-zero code. /// /// \retval 0 Success; All TOC entries were mapped, including the case that /// the .toc section is empty. /// /// \retval non-0 May be either one of the P9-XIP image error codes (see \ref /// p9_xip_image_errors), or a non-zero code from \a i_fn. Since the standard /// P9_XIP return codes are > 0, application-defined codes should be < 0. int p9_xip_map_toc(void* io_image, int (*i_fn)(void* io_image, const P9XipItem* i_item, void* io_arg), void* io_arg); /// Find a P9-XIP TOC entry /// /// \param[in] i_image A pointer to a P9-XIP image in host memory. The /// image is assumed to be consistent with the information contained in the /// header regarding the presence of and sizes of all sections. The image is /// also required to have been normalized. /// /// \param[in] i_id A 0-byte terminated ASCII string naming the item to be /// searched for. /// /// \param[out] o_item If the search is successful, then the object /// pointed to by \a o_item is filled in with the decoded form of the /// TOC entry for \a i_id. If the API returns a non-0 error code then the /// final state of the storage at \a o_item is undefined. This parameter may /// be suppied as 0, in which case p9_xip_find() serves as a simple predicate /// on whether an item is indexded in the TOC. /// /// This API searches the TOC of a normalized P9-XIP image for the item named /// \a i_id, and if found, fills in the structure pointed to by \a /// o_item with a decoded form of the TOC entry. If the item is not found, /// the following two return codes may be considered non-error codes: /// /// - P9_XIP_ITEM_NOT_FOUND : No TOC record for \a i_id was found. /// /// - P9_XIP_DATA_NOT_PRESENT : The item appears in the TOC, however the /// section containing the data is no longer present in the image. /// /// If the TOC section has been deleted from the image, then the search is /// restricted to the abbreviated TOC that indexes data in the .fixed section. /// In this case the \a o_item structure is marked with a 1 in the \a /// iv_partial field since the abbreviated TOC can not populate the entire /// P9XipItem structure. /// /// \note This API should typically only be used as a predicate, not as a way /// to access the image via the returned P9XipItem structure. To obtain data /// from the image or update data in the image use the p9_xip_get_*() and /// p9_xip_set_*() APIs respectively. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_find(void* i_image, const char* i_id, P9XipItem* o_item); /// Delete any section, except .header, from a P9-XIP image in host memory, /// even in-between sections, i.e. non-final sections. /// /// \param[in,out] io_image A pointer to a P9-XIP image in host memory. The /// image is assumed to be consistent with the information contained in the /// header regarding the presence of and sizes of all sections. The image is /// also required to have been normalized. In case of failure in this /// funtion, the io_image will get restored to its input value. /// /// \param[out] o_imageBuf A pointer to a pre-allocated buffer that MUST /// BE greater than or equal to the size of the \a io_image. The size of /// this buffer must be supplied in \a i_imageBufSize. If \a o_imageBuf /// is NULL, the supplied \a i_sectionId must be the final section in the /// image or this function will fail at deleting the section. On return /// from this function, o_imageBuf contains a copy of the initial input /// image \a io_image, but only if it's a valid buffer. /// /// \param[in] i_imageBufSize The size of \a o_imageBuf buffer. It MUST /// BE greater than or equal to the size of \a io_image. However, if \a /// o_imageBuf is NULL, then this arg is ignored. /// /// \param[in] i_sectionId Identifies the section to be deleted. See \ref /// p9_xip_sections. /// /// This API effectively deletes a section from a P9-XIP image held in host /// memory. Deleting a section of the image means that the section size is /// set to 0, and the size of the image recorded in the header is reduced by /// the section size. Any alignment padding of the in-between section is /// also handled, i.e. removed if final section and re-applied upon /// re-appending sections. In the special case where \a o_imageBuf is /// NULL, unless the requested \a i_sectionId is already empty, only the final /// section (highest address offset) of the image may be deleted. /// /// \note This API does not check for or warn if other sections in the image /// reference the deleted section. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_delete_section(void* io_image, void* o_imageBuf, const uint32_t i_imageBufSize, const int i_sectionId); #ifndef PPC_HYP /// Duplicate a section from a P9-XIP image in host memory /// /// \param[in,out] i_image A pointer to a P9-XIP image in host memory. The /// image is assumed to be consistent with the information contained in the /// header regarding the presence of and sizes of all sections. /// /// \param[in] i_sectionId Identifies the section to be duplicated. See \ref /// p9_xip_sections. /// /// \param[out] o_duplicate At exit, points to the newly allocated and /// initialized duplicate of the given section. The caller is responsible for /// free()-ing this memory when no longer required. /// /// \param[out] o_size At exit, contains the size (in bytes) of the duplicated /// section. /// /// This API creates a bytewise duplicate of a non-empty section into newly /// malloc()-ed memory. At exit \a o_duplicate points to the duplicate, and \a /// o_size is set the the size of the duplicated section. The caller is /// responsible for free()-ing the memory when no longer required. The /// pointer at \a o_duplicate is set to NULL (0) and the \a o_size is set to 0 /// in the event of any failure. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_duplicate_section(const void* i_image, const int i_sectionId, void** o_duplicate, uint32_t* o_size); #endif // PPC_HYP /// Append binary data to a P9-XIP image held in host memory /// /// \param[in,out] io_image A pointer to a P9-XIP image in host memory. The /// image is assumed to be consistent with the information contained in the /// header regarding the presence of and sizes of all sections. The image is /// also required to have been normalized. /// /// \param[in] i_sectionId Identifies the section to contain the new data. /// /// \param[in] i_data A pointer to the data to be appended to the image. If /// this pointer is NULL (0), then the effect is as if \a i_data were a /// pointer to an \a i_size array of 0 bytes. /// /// \param[in] i_size The size of the data to be appended in bytes. If \a /// i_data is 0, then this is the number of bytes to clear. /// /// \param[in] i_allocation The size of the memory region containing the /// image, measured from the first byte of the image. The call will fail if /// appending the new data plus any alignment padding would overflow the /// allocated memory. /// /// \param[out] o_sectionOffset If non-0 at entry, then the API updates the /// location pointed to by \a o_sectionOffset with the offset of the first /// byte of the appended data within the indicated section. This return value /// is invalid in the event of a non-0 return code. /// /// \param[in] i_ddSupport Specifies if the section contains ddLevel sub- /// sections (=1) or if it does not have ddLevel support (=0). /// /// This API copies data from \a i_data to the end of the indicated \a /// i_section. The section \a i_section must either be empty, or must be the /// final (highest address) section in the image. If the section is initially /// empty and \a i_size is non-0 then the section is created at the end of the /// image. The size of \a i_section and the size of the image are always /// adjusted to reflect the newly added data. This is a simple binary copy /// without any interpretation (e.g., endian-translation) of the copied data. /// The caller is responsible for insuring that the host memory area /// containing the P9-XIP image is large enough to hold the newly appended /// data without causing addressing errors or buffer overrun errors. /// /// The final parameter \a o_sectionOffset is optional, and may be passed as /// NULL (0) if the application does not require the information. This return /// value is provided to simplify typical use cases of this API: /// /// - A scan program is appended to the image, or a run-time data area is /// allocated and cleared at the end of the image. /// /// - Pointer variables in the image are updated with IMAGE addresses obtained /// via p9_xip_section2image(), or /// other procedure code initializes a newly allocated and cleared data area /// via host addresses obtained from p9_xip_section2host(). /// /// Regarding alignment, note that the P9-XIP format requires that sections /// maintain an initial alignment that varies by section, and the API will /// enforce these alignment constraints for all sections created by the API. /// All alignment is relative to the first byte of the image (\a io_image) - /// \e not to the current in-memory address of the image. By specification /// P9-XIP images must be loaded at a 4K alignment in order for IMAGE hardware /// relocation to work, however the APIs don't require this 4K alignment for /// in-memory manipulation of images. Images to be executed on ImageVe will /// normally require at least 8-byte final aligment in order to guarantee that /// the ImageVe can execute an 8-byte fetch or load/store of the final /// doubleword. /// /// \note If the TOC section is modified then the image is marked as having an /// unsorted TOC. /// /// \note If the call fails for any reason (other than a bug in the API /// itself) then the \a io_image data is returned unmodified. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_append(void* io_image, const int i_sectionId, const void* i_data, const uint32_t i_size, const uint32_t i_allocation, uint32_t* o_sectionOffset, uint8_t i_ddSupport); /// Convert a P9-XIP section offset to a relocatable IMAGE address /// /// \param[in] i_image A pointer to a P9-XIP image in host memory /// /// \param[in] i_sectionId A valid P9-XIP section identifier; The section /// must be non-empty. /// /// \param[in] i_offset An offset (in bytes) within the section. At least one /// byte at \a i_offset must be currently allocated in the section. /// /// \param[in] o_imageAddress The equivalent relocatable IMAGE address is /// returned via this pointer. Since valid IMAGE addresses are always either /// 4-byte (code) or 8-byte (data) aligned, this API checks the aligment of /// the translated address and returns P9_XIP_ALIGNMENT_ERROR if the IMAGE /// address is not at least 4-byte aligned. Note that the translated address /// is still returned even if incorrectly aligned. /// /// This API is typically used to translate section offsets returned from /// p9_xip_append() into relocatable IMAGE addresses. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_section2image(const void* i_image, const int i_sectionId, const uint32_t i_offset, uint64_t* o_imageAddress); /// Convert a P9-XIP relocatable image address to a host memory address /// /// \param[in] i_image A pointer to a P9-XIP image in host memory. /// /// \param[in] i_imageAddress A relocatable image address putatively addressing /// relocatable memory contained in the image. /// /// \param[out] o_hostAddress The API updates the location pointed to by \a /// o_hostAddress with the host address of the memory addressed by \a /// i_imageAddress. In the event of an error (non-0 return code) the final /// content of \a o_hostAddress is undefined. /// /// This API is typically used to translate relocatable image addresses stored /// in the P9-XIP image into the equivalent host address of the in-memory /// image, allowing host-code to manipulate arbitrary data structures in the /// image. If the \a i_imageAddress does not refer to memory within the image /// (as determined by the link address and image size) then the /// P9_XIP_INVALID_ARGUMENT error code is returned. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_image2host(const void* i_image, const uint64_t i_imageAddress, void** o_hostAddress); /// Convert a P9-XIP relocatable image address to section Id and offset /// /// \param[in] i_image A pointer to a P9-XIP image in host memory. /// /// \param[in] i_imageAddress A relocatable image address putatively addressing /// relocatable memory contained in the image. /// /// \param[out] o_section The API updates the location pointed to by \a /// o_section with the section Id of the memory addressed by \a /// i_imageAddress. In the event of an error (non-0 return code) the final /// content of \a o_section is undefined. /// /// \param[out] o_offset The API updates the location pointed to by \a /// o_offset with the byte offset of the memory addressed by \a i_imageAddress /// within \a o_section. In the event of an error (non-0 return code) the /// final content of \a o_offset is undefined. /// /// This API is typically used to translate relocatable image addresses stored /// in the P9-XIP image into the equivalent section + offset form, allowing /// host-code to manipulate arbitrary data structures in the image. If the \a /// i_imageAddress does not refer to memory within the image (as determined by /// the link address and image size) then the P9_XIP_INVALID_ARGUMENT error /// code is returned. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_image2section(const void* i_image, const uint64_t i_imageAddress, int* o_section, uint32_t* o_offset); /// Convert an in-memory P9-XIP host address to a relocatable image address /// /// \param[in] i_image A pointer to a P9-XIP image in host memory /// /// \param[in] i_hostAddress A host address addressing data within the image. /// /// \param[out] o_imageAddress The API updates the location pointed to by \a /// o_imageAddress with the equivelent relocatable image address of the memory /// addressed by i_hostAddress. Since valid image addresses are always either /// 4-byte (code) or 8-byte (data) aligned, this API checks the aligment of /// the translated address and returns P9_XIP_ALIGNMENT_ERROR if the image /// address is not at least 4-byte aligned. Note that the translated address /// is still returned evn if incorrectly aligned. /// /// This API is provided as a convenient way to convert host memory addresses /// for an in-memory P9-XIP image into image addresses correctly relocated for /// the image, for example to update pointer variables in the image. If the /// \a i_hostAddress does not refer to memory within the image (as determined /// by the image address and image size) then the P9_XIP_INVALID_ARGUMENT /// error code is returned. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_host2image(const void* i_image, void* i_hostAddress, uint64_t* o_imageAddress); /// Get all the information required to search and find the TOC /// /// \param[in] i_image A pointer to a P9-XIP image in host memory /// /// \param[out][optional] o_toc A pointer to TOC listing /// /// \param[out][optional] o_entries Number of TOC entries located /// /// \param[out][optional] o_sorted Indication if the TOC is sorted /// /// \param[out][optional] o_strings A pointer to String section containing TOC /// names /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_get_toc(void* i_image, P9XipToc** o_toc, size_t* o_entries, int* o_sorted, char** o_strings); /// Inform caller if specified sectionId has DD support /// /// \param[in] i_image A pointer to a P9-XIP image in host memory. /// /// \param[in] i_sectionId Identifies the section to be queried. See \ref /// p9_xip_sections. /// /// \param[out] o_bDdSupport Updated to contain true or false whether /// sectionId has DD support or not. /// /// \retval 0 Success /// /// \retval non-0 See \ref p9_xip_image_errors int p9_xip_dd_section_support(const void* i_image, const int i_sectionId, MyBool_t* o_bDdSupport); /// \brief Decode a TOC entry from dump file /// ///\param[in] - i_image - seeprom image ///\param[in] - i_dump - dump file ///\param[in] - i_imageToc - TOC entry ///\param[out] - o_item - decoded toc entry /// ///\return - 0 Success; non-0 See \ref p9_xip_image_errors int p9_xip_decode_toc_dump(void* i_image, void* i_dump, P9XipToc* i_imageToc, P9XipItem* o_item); // PHYP has their own way of implementing the functions. PHYP also // does not allow static functions or data, so all of the XIP_STATIC functions // defined here are global to PHYP. #ifdef PPC_HYP #ifdef PLIC_MODULE #define strcpy(dest, src) hvstrcpy(dest, src) #define strlen(s) hvstrlen(s) #define strcmp(s1, s2) hvstrcmp(s1, s2) #endif //PLIC_MODULE #define XIP_STATIC #else // PPC_HYP // #define XIP_STATIC static #define XIP_STATIC #endif // PPC_HYP /// \defgroup p9_xip_image_errors Error codes from P9-XIP image APIs /// /// @{ /// A putative P9-XIP image does not have the correct magic number, or /// contains some other major inconsistency. #define P9_XIP_IMAGE_ERROR 1 /// The TOC may be missing, partially present or may have an alignment problem. #define P9_XIP_TOC_ERROR 2 /// A named item was not found in the P9-XIP TOC, or a putative HALT address /// is not associated with a halt code in .halt. #define P9_XIP_ITEM_NOT_FOUND 3 /// A named item appears in the P9-XIP TOC, but the data is not present in /// the image. This error can occur if sections have been deleted from the /// image. #define P9_XIP_DATA_NOT_PRESENT 4 /// A named item appears in the P9-XIP TOC, but the data can not be /// modified. This error will occur if an attempt is made to modify an /// address-only entry. #define P9_XIP_CANT_MODIFY 5 /// A direct or implied argument is invalid, e.g. an illegal data type or /// section identifier, or an address not contained within the image. #define P9_XIP_INVALID_ARGUMENT 6 /// A data type mismatch or an illegal type was specified or implied for an /// operation. #define P9_XIP_TYPE_ERROR 7 /// A bug in a P9-XIP image API #define P9_XIP_BUG 8 /// The image must first be normalized with p9_xip_normalize(). #define P9_XIP_NOT_NORMALIZED 9 /// Attempt to delete a non-empty section that is not the final section of the /// image, or an attempt to append data to a non-empty section that is not the /// final section of the image, or an attempt to operate on an empty section /// for those APIs that prohibit this. #define P9_XIP_SECTION_ERROR 10 /// An address translation API returned a image address that was not at least /// 4-byte aligned, or alignment violations were observed by /// p9_xip_validate() or p9_xip_append(). #define P9_XIP_ALIGNMENT_ERROR 11 /// An API that performs dynamic memory allocation was unable to allocate /// memory. #define P9_XIP_NO_MEMORY 12 /// Attempt to get or set a vector element with an index that is outside of /// the declared bounds of the vector. #define P9_XIP_BOUNDS_ERROR 13 /// Attempt to grow the image past its defined memory allocation #define P9_XIP_WOULD_OVERFLOW 14 /// Error associated with the disassembler occured. #define P9_XIP_DISASSEMBLER_ERROR 15 /// Hash collision creating the .fixed_toc section #define P9_XIP_HASH_COLLISION 16 /// Invalid buffer. It had a NULL ptr. #define P9_XIP_NULL_BUFFER 17 /// Image has been broken and unable to restore original image. #define P9_XIP_CANT_RESTORE_IMAGE 18 /// .rings seciton for specific dd level is larger than the allowable size #define P9_XIP_SBE_DD_SIZE_ERR 19 /// Specified section has no ddLevel support #define P9_XIP_NO_DDLEVEL_SUPPORT 20 /// Specified ddLevel was not found in section #define P9_XIP_DDLEVEL_NOT_FOUND 21 /// Code bug in the ddLevel handling codes #define P9_XIP_DDLEVEL_CODE_BUG 22 /// Applications can expand this macro to declare an array of string forms of /// the error codes if desired. #define P9_XIP_ERROR_STRINGS(var) \ const char* var[] = { \ "Success", \ "P9_XIP_IMAGE_ERROR", \ "P9_XIP_TOC_ERROR", \ "P9_XIP_ITEM_NOT_FOUND", \ "P9_XIP_DATA_NOT_PRESENT", \ "P9_XIP_CANT_MODIFY", \ "P9_XIP_INVALID_ARGUMENT", \ "P9_XIP_TYPE_ERROR", \ "P9_XIP_BUG", \ "P9_XIP_NOT_NORMALIZED", \ "P9_XIP_SECTION_ERROR", \ "P9_XIP_ALIGNMENT_ERROR", \ "P9_XIP_NO_MEMORY", \ "P9_XIP_BOUNDS_ERROR", \ "P9_XIP_WOULD_OVERFLOW", \ "P9_XIP_DISASSEMBLER_ERROR", \ "P9_XIP_HASH_COLLISION", \ "P9_XIP_NULL_BUFFER", \ "P9_XIP_CANT_RESTORE_IMAGE", \ "P9_XIP_SBE_DD_SIZE_ERR", \ "P9_XIP_NO_DDLEVEL_SUPPORT", \ "P9_XIP_DDLEVEL_NOT_FOUND", \ "P9_XIP_DDLEVEL_CODE_BUG", \ } /// Applications can use this macro to safely index the array of error /// strings. #define P9_XIP_ERROR_STRING(var, n) \ ((((n) < 0) || ((n) > (int)(sizeof(var) / sizeof(char*)))) ? \ "Bug : Invalid P9-XIP error code" : var[n]) /// @} /// Disassembler error codes. #define DIS_IMAGE_ERROR 1 #define DIS_MEMORY_ERROR 2 #define DIS_DISASM_ERROR 3 #define DIS_RING_NAME_ADDR_MATCH_SUCCESS 4 #define DIS_RING_NAME_ADDR_MATCH_FAILURE 5 #define DIS_TOO_MANY_DISASM_WARNINGS 6 #define DIS_DISASM_TROUBLES 7 #define DIS_ERROR_STRINGS(var) \ const char* var[] = { \ "Success", \ "DIS_IMAGE_ERROR", \ "DIS_MEMORY_ERROR", \ "DIS_DISASM_ERROR", \ "DIS_RING_NAME_ADDR_MATCH_SUCCESS", \ "DIS_RING_NAME_ADDR_MATCH_FAILURE", \ "DIS_TOO_MANY_DISASM_WARNINGS", \ "DIS_DISASM_TROUBLES", \ } #define DIS_ERROR_STRING(var, n) \ ((((n) < 0) || ((n) > (int)(sizeof(var) / sizeof(char*)))) ? \ "Bug : Invalid DIS error code" : var[n]) #if 0 { /* So __cplusplus doesn't mess w/auto-indent */ #endif #ifdef __cplusplus } #endif #endif // __ASSEMBLER__ //////////////////////////////////////////////////////////////////////////// // Assembler Definitions //////////////////////////////////////////////////////////////////////////// #ifdef __ASSEMBLER__ /// Create an XIP TOC entry /// /// \param[in] index The string form of the \a index symbol is created and /// linked from the TOC entry to allow external search procedures to locate /// the \a address. /// /// \param[in] type One of the P9_XIP_* type constants; See \ref /// p9_xip_toc_types. /// /// \param[in] address The address of the idexed code or data; This will /// typically be a symbol. /// /// \param[in] elements For vector types, number of elements in the /// vector, which is limited to an 8-bit unsigned integer. This parameter /// defaults to 1 which indicates a scalar type. Declaring a vector with 0 /// elements disables bounds checking on vector accesses, and can be used if /// very large or indeterminate sized vectors are required. The TOC format /// does not support vectors of strings or addresses. /// /// The \c .xip_toc macro creates a XIP Table of Contents (TOC) structure in /// the \c .toc section, as specified by the parameters. This macro is /// typically not used directly in assembly code. Instead programmers should /// use .xip_quad, .xip_quada, .xip_quadia, .xip_address or .xip_string .macro .xip_toc, index:req, type:req, address:req, elements=1 .if (((\type) < 1) || ((\type) > P9_XIP_MAX_TYPE_INDEX)) .error ".xip_toc : Illegal type index" .endif // First push into the .strings section to lay down the // string form of the index name under a local label. .pushsection .strings 7667862: .asciz "\index" .popsection // Now the 12-byte TOC entry is created. Push into the .toc section // and lay down the first 4 bytes which are always a pointer to the // string just declared. The next 4 bytes are the address of the data // (or the address itself in the case of address types). The final 4 // bytes are the type, section (always 0 prior to normalization), // number of elements, and a padding byte. .pushsection .toc .long 7667862b, (\address) .byte (\type), 0, (\elements), 0 .popsection .endm /// Allocate and initialize 64-bit global scalar or vector data and create the /// TOC entry. /// /// \param[in] symbol The name of the scalar or vector; this name is also used /// as the TOC index of the data. /// /// \param[in] init The initial value of (each element of) the data. /// This is a 64-bit integer; To allocate address pointers use .xip_quada. /// /// \param[in] elements The number of 64-bit elements in the data structure, /// defaulting to 1, with a maximum value of 255. /// /// \param[in] section The section where the data will be allocated, /// default depends on the memory space .macro .xip_quad, symbol:req, init:req, elements=1, section ..xip_quad_helper .quad, \symbol, (\init), (\elements), \section .endm /// Allocate and initialize 64-bit global scalar or vector data containing a /// relocatable address in and create the TOC entry. /// /// \param[in] symbol The name of the scalar or vector; this name is also used /// as the TOC index of the data. /// /// \param[in] init The initial value of (each element of) the data. This /// will typically be a symbolic address. If the intention is to define an /// address that will always be filled in later by image manipulation tools, /// then use the .xip_quad macro with a 0 initial value. /// /// \param[in] elements The number of 64-bit elements in the data structure, /// defaulting to 1, with a maximum value of 255. /// /// \param[in] section The section where the data will be allocated, /// default depends on the memory space .macro .xip_quada, symbol:req, offset:req, elements=1, section ..xip_quad_helper .quada, \symbol, (\offset), (\elements), \section .endm /// Helper for .xip_quad and .xip_quada .macro ..xip_quad_helper, directive, symbol, init, elements, section .if (((\elements) < 1) || ((\elements) > 255)) .error "The number of vector elements must be in the range 1..255" .endif ..xip_pushsection \section .balign 8 .global \symbol \symbol\(): .rept (\elements) \directive (\init) .endr .popsection .xip_toc \symbol, P9_XIP_UINT64, \symbol, (\elements) .endm /// Allocate and initialize 64-bit global scalar or vector data containing /// full 64-bit addresses and create a TOC entry /// /// \param[in] symbol The name of the scalar or vector; this name is also used /// as the TOC index of the data. /// /// \param[in] space A valid image memory space descriptor /// /// \param[in] offset A 32-bit relocatable offset /// /// \param[in] elements The number of 64-bit elements in the data structure, /// defaulting to 1, with a maximum value of 255. /// /// \param[in] section The section where the data will be allocated, /// default depends on the memory space .macro .xip_quadia, symbol:req, space:req, offset:req, elements=1, section .if (((\elements) < 1) || ((\elements) > 255)) .error "The number of vector elements must be in the range 1..255" .endif ..xip_pushsection \section .balign 8 .global \symbol \symbol\(): .rept (\elements) .quadia (\space), (\offset) .endr .popsection .xip_toc \symbol, P9_XIP_UINT64, \symbol, (\elements) .endm /// Default push into .ipl_data unless in an OCI space, then .data .macro ..xip_pushsection, section .ifnb \section .pushsection \section .else .if (_PGAS_DEFAULT_SPACE == PORE_SPACE_OCI) .pushsection .data .else .pushsection .ipl_data .endif .endif .balign 8 .endm /// Allocate and initialize a string in .strings /// /// \param[in] index The string will be stored in the TOC using this index /// symbol. /// /// \param[in] string The string to be allocated in .strings. String space is /// fixed once allocated. Strings designed to be overwritten by external tools /// should be allocated to be as long as eventually needed (e.g., by a string /// of blanks.) .macro .xip_string, index:req, string:req .pushsection .strings 7874647: .asciz "\string" .popsection .xip_toc \index, P9_XIP_STRING, 7874647b .endm /// Shorthand to create a TOC entry for an address /// /// \param[in] index The symbol will be indexed as this name /// /// \param[in] symbol The symbol to index; by default the same as /// the index. .macro .xip_address, index:req, symbol .ifb \symbol .xip_toc \index, P9_XIP_ADDRESS, \index .else .xip_toc \index, P9_XIP_ADDRESS, \symbol .endif .endm .macro .xip_section, s, alignment=1, empty=0 .ifnb \s _\s\()_section: .if \empty .long 0 .long 0 .else .long _\s\()_offset .long _\s\()_size .endif .else .long 0 .long 0 .endif .byte (\alignment) .byte 0, 0, 0 .endm #endif // __ASSEMBLER__ #ifndef __ASSEMBLER__ /**************************************************************************/ /* SBE Image */ /**************************************************************************/ typedef enum { P9_XIP_SECTION_SBE_LOADERTEXT = P9_XIP_SECTIONS_PLUS(0), P9_XIP_SECTION_SBE_LOADERDATA = P9_XIP_SECTIONS_PLUS(1), P9_XIP_SECTION_SBE_TEXT = P9_XIP_SECTIONS_PLUS(2), P9_XIP_SECTION_SBE_DATA = P9_XIP_SECTIONS_PLUS(3), P9_XIP_SECTION_SBE_BASE = P9_XIP_SECTIONS_PLUS(4), P9_XIP_SECTION_SBE_BASELOADER = P9_XIP_SECTIONS_PLUS(5), P9_XIP_SECTION_SBE_OVERRIDES = P9_XIP_SECTIONS_PLUS(6), P9_XIP_SECTION_SBE_RINGS = P9_XIP_SECTIONS_PLUS(7), P9_XIP_SECTION_SBE_OVERLAYS = P9_XIP_SECTIONS_PLUS(8), P9_XIP_SECTION_SBE_HBBL = P9_XIP_SECTIONS_PLUS(9), P9_XIP_SECTIONS_SBE = P9_XIP_SECTIONS_PLUS(10) // # sections } p9_xip_section_sbe_t; #define P9_XIP_SECTION_NAMES_SBE(var) \ P9_XIP_SECTION_NAMES(var, \ ".loader_text", \ ".loader_data", \ ".text", \ ".data", \ ".base", \ ".baseloader", \ ".overrides", \ ".rings", \ ".overlays", \ ".hbbl") /**************************************************************************/ /* Hardware Image */ /**************************************************************************/ typedef enum { P9_XIP_SECTION_HW_SGPE = P9_XIP_SECTIONS_PLUS(0), P9_XIP_SECTION_HW_RESTORE = P9_XIP_SECTIONS_PLUS(1), P9_XIP_SECTION_HW_CME = P9_XIP_SECTIONS_PLUS(2), P9_XIP_SECTION_HW_PGPE = P9_XIP_SECTIONS_PLUS(3), P9_XIP_SECTION_HW_IOPPE = P9_XIP_SECTIONS_PLUS(4), P9_XIP_SECTION_HW_FPPE = P9_XIP_SECTIONS_PLUS(5), P9_XIP_SECTION_HW_RINGS = P9_XIP_SECTIONS_PLUS(6), P9_XIP_SECTION_HW_OVERLAYS = P9_XIP_SECTIONS_PLUS(7), P9_XIP_SECTIONS_HW = P9_XIP_SECTIONS_PLUS(8) // # sections } p9_xip_section_hw_t; #define P9_XIP_SECTION_NAMES_HW(var) \ P9_XIP_SECTION_NAMES(var, \ ".sgpe", \ ".core_restore", \ ".cme", \ ".pgpe", \ ".ioppe", \ ".fppe", \ ".rings", \ ".overlays") /**************************************************************************/ /* SGPE Image */ /**************************************************************************/ typedef enum { P9_XIP_SECTION_SGPE_QPMR = P9_XIP_SECTIONS_PLUS(0), P9_XIP_SECTION_SGPE_LVL1_BL = P9_XIP_SECTIONS_PLUS(1), P9_XIP_SECTION_SGPE_LVL2_BL = P9_XIP_SECTIONS_PLUS(2), P9_XIP_SECTION_SGPE_HCODE = P9_XIP_SECTIONS_PLUS(3), P9_XIP_SECTIONS_SGPE = P9_XIP_SECTIONS_PLUS(4) // # sections } p9_xip_section_sgpe_t; #define P9_XIP_SECTION_NAMES_SGPE(var) \ P9_XIP_SECTION_NAMES(var, \ ".qpmr", \ ".lvl1_bl", \ ".lvl2_bl", \ ".hcode") /**************************************************************************/ /* Core Restore Image */ /**************************************************************************/ typedef enum { P9_XIP_SECTION_RESTORE_CPMR = P9_XIP_SECTIONS_PLUS(0), P9_XIP_SECTION_RESTORE_SELF = P9_XIP_SECTIONS_PLUS(1), P9_XIP_SECTIONS_RESTORE = P9_XIP_SECTIONS_PLUS(2) // # sections } p9_xip_section_restore_t; #define P9_XIP_SECTION_NAMES_RESTORE(var) \ P9_XIP_SECTION_NAMES(var, \ ".cpmr", \ ".self_restore") /**************************************************************************/ /* CME Image */ /**************************************************************************/ typedef enum { P9_XIP_SECTION_CME_HCODE = P9_XIP_SECTIONS_PLUS(0), P9_XIP_SECTIONS_CME = P9_XIP_SECTIONS_PLUS(1) // # sections } p9_xip_section_cme_t; #define P9_XIP_SECTION_NAMES_CME(var) \ P9_XIP_SECTION_NAMES(var, \ ".hcode") /**************************************************************************/ /* PGPE Image */ /**************************************************************************/ typedef enum { P9_XIP_SECTION_PGPE_PPMR = P9_XIP_SECTIONS_PLUS(0), P9_XIP_SECTION_PGPE_LVL1_BL = P9_XIP_SECTIONS_PLUS(1), P9_XIP_SECTION_PGPE_LVL2_BL = P9_XIP_SECTIONS_PLUS(2), P9_XIP_SECTION_PGPE_HCODE = P9_XIP_SECTIONS_PLUS(3), P9_XIP_SECTION_PGPE_AUX_TASK = P9_XIP_SECTIONS_PLUS(4), P9_XIP_SECTIONS_PGPE = P9_XIP_SECTIONS_PLUS(5) // # sections } p9_xip_section_pgpe_t; #define P9_XIP_SECTION_NAMES_PGPE(var) \ P9_XIP_SECTION_NAMES(var, \ ".ppmr_header", \ ".lvl1_bl", \ ".lvl2_bl", \ ".hcode", \ ".aux_task") /**************************************************************************/ /* IOPPE Image */ /**************************************************************************/ typedef enum { P9_XIP_SECTION_IOPPE_IOF = P9_XIP_SECTIONS_PLUS(0), P9_XIP_SECTION_IOPPE_IOO_ABUS = P9_XIP_SECTIONS_PLUS(1), P9_XIP_SECTION_IOPPE_IOO_NV = P9_XIP_SECTIONS_PLUS(2), P9_XIP_SECTIONS_IOPPE = P9_XIP_SECTIONS_PLUS(3) // # sections } p9_xip_section_ioppe_t; #define P9_XIP_SECTION_NAMES_IOPPE(var) \ P9_XIP_SECTION_NAMES(var, \ ".iof", \ ".ioo_abus", \ ".ioo_nv") /**************************************************************************/ /* FPPE Image */ /**************************************************************************/ typedef enum { P9_XIP_SECTIONS_FPPE = P9_XIP_SECTIONS_PLUS(0) // # sections } p9_xip_section_fppe_t; #define P9_XIP_SECTION_NAMES_FPPE(var) \ P9_XIP_SECTION_NAMES(var) #endif /* !__ASSEMBLER__ */ #endif // __P9_XIP_IMAGE_H // *INDENT-ON*