/* IBM_PROLOG_BEGIN_TAG                                                   */
/* This is an automatically generated prolog.                             */
/*                                                                        */
/* $Source: src/import/chips/p9/procedures/hwp/nest/p9_mss_eff_grouping.C $ */
/*                                                                        */
/* OpenPOWER HostBoot Project                                             */
/*                                                                        */
/* Contributors Listed Below - COPYRIGHT 2015,2018                        */
/* [+] International Business Machines Corp.                              */
/*                                                                        */
/*                                                                        */
/* Licensed under the Apache License, Version 2.0 (the "License");        */
/* you may not use this file except in compliance with the License.       */
/* You may obtain a copy of the License at                                */
/*                                                                        */
/*     http://www.apache.org/licenses/LICENSE-2.0                         */
/*                                                                        */
/* Unless required by applicable law or agreed to in writing, software    */
/* distributed under the License is distributed on an "AS IS" BASIS,      */
/* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or        */
/* implied. See the License for the specific language governing           */
/* permissions and limitations under the License.                         */
/*                                                                        */
/* IBM_PROLOG_END_TAG                                                     */
///----------------------------------------------------------------------------
/// @file  p9_mss_eff_grouping.C
///
/// @brief Perform Memory Controller grouping on a processor chip
///
/// The purpose of this procedure is to effectively group the memory on each
/// processor chip based on available memory behind its memory grouping ports.
/// Some placement policy/scheme and other info that are stored in the
/// attributes are used as part of the grouping process.
///
///----------------------------------------------------------------------------
/// *HWP HWP Owner   : Joe McGill <jmcgill@us.ibm.com>
/// *HWP FW Owner    : Thi Tran <thi@us.ibm.com>
/// *HWP Team        : Nest
/// *HWP Level       : 3
/// *HWP Consumed by : HB
///----------------------------------------------------------------------------

//------------------------------------------------------------------------------
// Includes
//------------------------------------------------------------------------------
#include <p9_mss_eff_grouping.H>
#include <p9_fbc_utils.H>
#include <map>
#include <generic/memory/lib/utils/memory_size.H>

///----------------------------------------------------------------------------
/// Constant definitions
///----------------------------------------------------------------------------
// ------------------
// System structure
// ------------------
// MC port position
const uint8_t MCPORTID_0 = 0x0;
const uint8_t MCPORTID_1 = 0x1;
const uint8_t MCPORTID_2 = 0x2;
const uint8_t MCPORTID_3 = 0x3;
const uint8_t MCPORTID_4 = 0x4;
const uint8_t MCPORTID_5 = 0x5;
const uint8_t MCPORTID_6 = 0x6;
const uint8_t MCPORTID_7 = 0x7;

// Max queues per port (MCPERF0 16:21)
const uint8_t MAX_HTM_QUEUE_PER_PORT = 16;

// -----------------------
// Group allow definitions
// -----------------------
// Enum value used to decode ATTR_MSS_INTERLEAVE_ENABLE
// P9 allows 1, 2, 3, 4, 6, or 8 memory ports to be grouped together.
enum GroupAllowed
{
    GROUP_1    = 0b00000001,   // 0x01 Group of 1 port allowed
    GROUP_2    = 0b00000010,   // 0x02 Group of 2 ports allowed
    GROUP_3    = 0b00000100,   // 0x04 Group of 3 ports allowed
    GROUP_4    = 0b00001000,   // 0x08 Group of 4 ports allowed
    GROUP_6    = 0b00100000,   // 0x20 Group of 6 ports allowed
    GROUP_8    = 0b10000000,   // 0x80 Group of 8 ports allowed
    ALL_GROUPS = GROUP_1 |
                 GROUP_2 |
                 GROUP_3 |
                 GROUP_4 |
                 GROUP_6 |
                 GROUP_8,
};

///----------------------------------------------------------------------------
/// struct EffGroupingSysAttrs
///----------------------------------------------------------------------------
///
/// @struct EffGroupingSysAttrs
/// Contains system attribute values that are needed to perform
/// memory effective grouping.
///
struct EffGroupingSysAttrs
{
    ///
    /// @brief getAttrs
    /// Function that reads the system attributes and load their values
    /// into the struct.
    ///
    /// @return FAPI2_RC_SUCCESS if success, else error code.
    ///
    fapi2::ReturnCode getAttrs();

    // Public data
    uint8_t iv_selectiveMode = 0;        // ATTR_MEM_MIRROR_PLACEMENT_POLICY
    uint8_t iv_hwMirrorEnabled = 0;      // ATTR_MRW_HW_MIRRORING_ENABLE
    uint8_t iv_groupsAllowed = 0;        // ATTR_MSS_INTERLEAVE_ENABLE
};

// See doxygen in struct definition.
fapi2::ReturnCode EffGroupingSysAttrs::getAttrs()
{
    FAPI_DBG("Entering EffGroupingSysAttrs::getAttrs");

    fapi2::ReturnCode l_rc;
    const fapi2::Target<fapi2::TARGET_TYPE_SYSTEM> FAPI_SYSTEM;
    uint8_t l_addr_extension_group_id = 0;
    uint8_t l_addr_extension_chip_id = 0;
    uint64_t l_max_interleave_group_size;
    fapi2::ATTR_CHIP_EC_FEATURE_EXTENDED_ADDRESSING_MODE_Type l_extended_addressing_mode = 0;
    fapi2::ATTR_CHIP_EC_FEATURE_HW423589_OPTION2_Type l_hw423589_option2 = 0;

    auto l_targets = FAPI_SYSTEM.getChildren<fapi2::TARGET_TYPE_PROC_CHIP>();

    if (l_targets.size() != 0)
    {
        FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_CHIP_EC_FEATURE_EXTENDED_ADDRESSING_MODE,
                               l_targets.front(),
                               l_extended_addressing_mode),
                 "Error from FAPI_ATTR_GET (fapi2::ATTR_CHIP_EC_FEATURE_EXTENDED_ADDRESSING_MODE)");

        FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_CHIP_EC_FEATURE_HW423589_OPTION2,
                               l_targets.front(),
                               l_hw423589_option2),
                 "Error from FAPI_ATTR_GET (ATTR_CHIP_EC_FEATURE_HW423589_OPTION2)");

        FAPI_DBG("Extended addressing supported: %d, HW423589 option2: %d",
                 l_extended_addressing_mode,
                 l_hw423589_option2);
    }

    if (l_extended_addressing_mode)
    {
        if (l_hw423589_option2)
        {
            l_addr_extension_group_id = CHIP_ADDRESS_EXTENSION_GROUP_ID_MASK_HW423589_OPTION2;
            l_addr_extension_chip_id = CHIP_ADDRESS_EXTENSION_CHIP_ID_MASK_HW423589_OPTION2;
        }

        // enable extended addressing mode, seed attributes from defaults
        // should allow for testing alternate configurations via Cronus with const
        // attribute overrides
        FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_FABRIC_ADDR_EXTENSION_GROUP_ID,
                               FAPI_SYSTEM,
                               l_addr_extension_group_id),
                 "Error from FAPI_ATTR_SET (ATTR_FABRIC_ADDR_EXTENSION_GROUP_ID)");
        FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_FABRIC_ADDR_EXTENSION_CHIP_ID,
                               FAPI_SYSTEM,
                               l_addr_extension_chip_id),
                 "Error from FAPI_ATTR_SET (ATTR_FABRIC_ADDR_EXTENSION_CHIP_ID)");
    }

    if (l_hw423589_option2)
    {
        // restrict max size for MCD issue
        l_max_interleave_group_size = MAX_INTERLEAVE_GROUP_SIZE_HW423589_OPTION2;
    }
    else
    {
        l_max_interleave_group_size = MAX_INTERLEAVE_GROUP_SIZE;
    }

    // store attribute in GB for direct comparison with group size attributes
    l_max_interleave_group_size = l_max_interleave_group_size >> 30;

    FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_MAX_INTERLEAVE_GROUP_SIZE,
                           FAPI_SYSTEM,
                           l_max_interleave_group_size),
             "Error from FAPI_ATTR_SET (ATTR_MAX_INTERLEAVE_GROUP_SIZE)");

    // Get mirror placement policy
    FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_MEM_MIRROR_PLACEMENT_POLICY,
                           FAPI_SYSTEM, iv_selectiveMode),
             "Error getting ATTR_MEM_MIRROR_PLACEMENT_POLICY, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Get mirror option
    FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_MRW_HW_MIRRORING_ENABLE,
                           FAPI_SYSTEM, iv_hwMirrorEnabled),
             "Error getting ATTR_MRW_HW_MIRRORING_ENABLE, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Get interleave option
    FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_MSS_INTERLEAVE_ENABLE, FAPI_SYSTEM,
                           iv_groupsAllowed),
             "Error getting ATTR_MSS_INTERLEAVE_ENABLE, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    if (l_hw423589_option2)
    {
        // Disallow 6-way/3-way interleave to prevent overflow of 512 GB
        // footprint with 7 of 8 max-sized DIMMs present
        FAPI_INF("Groups of 6 & 3 are not allowed with HW423589 option2");
        iv_groupsAllowed &= ~GROUP_6;
        iv_groupsAllowed &= ~GROUP_3;
    }

    // Display attribute values
    FAPI_INF("EffGroupingSysAttrs: ");
    FAPI_INF("   ATTR_MEM_MIRROR_PLACEMENT_POLICY 0x%.8X", iv_selectiveMode);
    FAPI_INF("   ATTR_MRW_HW_MIRRORING_ENABLE 0x%.8X", iv_hwMirrorEnabled);
    FAPI_INF("   ATTR_MSS_INTERLEAVE_ENABLE 0x%.8X", iv_groupsAllowed);

fapi_try_exit:
    FAPI_DBG("Exiting EffGroupingSysAttrs::getAttrs");
    return fapi2::current_err;
}


///----------------------------------------------------------------------------
/// struct EffGroupingProcAttrs
///----------------------------------------------------------------------------
///
/// @struct EffGroupingProcAttrs
/// Contains processor chip attribute values that are needed to perform
/// memory effective grouping.
///
struct EffGroupingProcAttrs
{
    ///
    /// @brief getAttrs
    /// Function that reads the processor target attributes and load their
    /// values into the struct.
    ///
    /// @param[in] i_target    Reference to processor chip target
    ///
    /// @return FAPI2_RC_SUCCESS if success, else error code.
    ///
    fapi2::ReturnCode getAttrs(
        const fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target,
        const EffGroupingSysAttrs i_sysAttrs);

    ///
    /// @brief calcProcBaseAddr
    /// Function that calculates the Memory base address values (for both
    /// non-mirrored/mirrored memory) for this proc target.
    /// The memory base addresses then will be written to the
    /// ATTR_PROC_MEM_BASE and ATTR_PROC_MIRROR_BASE attributes.
    ///
    /// @param[in] i_target    Reference to processor chip target
    ///
    /// @return FAPI2_RC_SUCCESS if success, else error code.
    ///
    fapi2::ReturnCode calcProcBaseAddr(
        const fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target,
        const EffGroupingSysAttrs i_sysAttrs);

    // Public data
    std::vector<uint64_t> iv_memBaseAddr;    // ATTR_PROC_MEM_BASE
    std::vector<uint64_t> iv_mirrorBaseAddr; // ATTR_PROC_MIRROR_BASE

    uint64_t iv_maxGroupMemSize = 0;         // ATTR_MAX_INTERLEAVE_GROUP_SIZE

    uint64_t iv_nhtmBarSize;                        // ATTR_PROC_NHTM_BAR_SIZE
    uint64_t iv_chtmBarSizes[NUM_OF_CHTM_REGIONS];  // ATTR_PROC_CHTM_BAR_SIZES

    uint64_t iv_occSandboxSize = 0; // ATTR_PROC_OCC_SANDBOX_SIZE
    uint32_t iv_fabricSystemId = 0; // ATTR_PROC_FABRIC_SYSTEM_ID
    uint8_t  iv_fabricGroupId = 0;  // ATTR_PROC_FABRIC_GROUP_ID
    uint8_t  iv_fabricChipId = 0;   // ATTR_PROC_FABRIC_CHIP_ID
};


// See doxygen in struct definition.
fapi2::ReturnCode EffGroupingProcAttrs::calcProcBaseAddr(
    const fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target,
    const EffGroupingSysAttrs i_sysAttrs)
{
    FAPI_DBG("Entering");

    std::vector<uint64_t> l_memBaseAddr1;
    uint64_t l_mmioBaseAddr;

    // Get the Mirror/Non-mirror base addresses
    FAPI_TRY(p9_fbc_utils_get_chip_base_address(i_target,
             EFF_FBC_GRP_CHIP_IDS,
             iv_memBaseAddr,
             l_memBaseAddr1,
             iv_mirrorBaseAddr,
             l_mmioBaseAddr),
             "p9_fbc_utils_get_chip_base_address() returns an error, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    iv_memBaseAddr.insert(iv_memBaseAddr.end(), l_memBaseAddr1.begin(), l_memBaseAddr1.end());

fapi_try_exit:
    FAPI_DBG("Exiting");
    return fapi2::current_err;
}

// See doxygen in struct definition.
fapi2::ReturnCode EffGroupingProcAttrs::getAttrs(
    const fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target,
    const EffGroupingSysAttrs i_sysAttrs)
{
    FAPI_DBG("Entering EffGroupingProcAttrs::getAttrs");

    // Get size (max) of each msel region
    FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_MAX_INTERLEAVE_GROUP_SIZE,
                           fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(),
                           iv_maxGroupMemSize),
             "Error from FAPI_ATTR_GET (ATTR_MAX_INTERLEAVE_GROUP_SIZE)");

    // Get Nest Hardware Trace Macro (NHTM) bar size
    FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_PROC_NHTM_BAR_SIZE, i_target, iv_nhtmBarSize),
             "Error getting ATTR_PROC_HTM_BAR_SIZE, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Get Core Hardware Trace Macro (CHTM) bar size
    FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_PROC_CHTM_BAR_SIZES, i_target, iv_chtmBarSizes),
             "Error getting ATTR_PROC_CHTM_BAR_SIZES, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Get On Chip Controler (OCC) sandbox size
    FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_PROC_OCC_SANDBOX_SIZE, i_target,
                           iv_occSandboxSize),
             "Error getting ATTR_PROC_OCC_SANDBOX_SIZE, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Get Fabric system ID
    FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_PROC_FABRIC_SYSTEM_ID, i_target,
                           iv_fabricSystemId),
             "Error getting ATTR_PROC_FABRIC_SYSTEM_ID, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Get Fabric group ID
    FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_PROC_FABRIC_GROUP_ID, i_target,
                           iv_fabricGroupId),
             "Error getting ATTR_PROC_FABRIC_GROUP_ID, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Get Fabric chip ID
    FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_PROC_FABRIC_CHIP_ID, i_target,
                           iv_fabricChipId),
             "Error getting ATTR_PROC_FABRIC_CHIP_ID, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Figure out memory base addresses for this proc and
    // writes values to ATTR_PROC_MEM_BASE and ATTR_PROC_MIRROR_BASE
    FAPI_TRY(calcProcBaseAddr(i_target, i_sysAttrs),
             "EffGroupingProcAttrs::getAttrs: calcProcBaseAddr() returns "
             "error, l_rc 0x%.8X", (uint64_t)fapi2::current_err);

    // Display attribute values
    FAPI_INF("EffGroupingProcAttrs::getAttrs: ");
    FAPI_INF("  ATTR_PROC_NHTM_BAR_SIZE 0x%.16llX", iv_nhtmBarSize);

    for (uint8_t ii = 0; ii < NUM_OF_CHTM_REGIONS; ii++)
    {
        FAPI_INF("  ATTR_PROC_CHTM_BAR_SIZES[%u] 0x%.16llX", ii, iv_chtmBarSizes[ii]);
    }

    FAPI_INF("  ATTR_PROC_OCC_SANDBOX_SIZE 0x%.16llX", iv_occSandboxSize);
    FAPI_INF("  ATTR_PROC_FABRIC_SYSTEM_ID 0x%.8X", iv_fabricSystemId);
    FAPI_INF("  ATTR_PROC_FABRIC_GROUP_ID 0x%.8X", iv_fabricGroupId);
    FAPI_INF("  ATTR_PROC_FABRIC_CHIP_ID 0x%.8X", iv_fabricChipId);

    for (uint8_t ii = 0; ii < iv_memBaseAddr.size(); ii++)
    {
        FAPI_INF("  ATTR_PROC_MEM_BASE[%d] 0x%.16llX", ii, iv_memBaseAddr[ii]);
    }

    for (uint8_t ii = 0; ii < iv_mirrorBaseAddr.size(); ii++)
    {
        FAPI_INF("  ATTR_PROC_MIRROR_BASE[%d] 0x%.16llX", ii, iv_mirrorBaseAddr[ii]);
    }

fapi_try_exit:
    FAPI_DBG("Exiting EffGroupingProcAttrs::getAttrs");
    return fapi2::current_err;
}

///----------------------------------------------------------------------------
/// struct EffGroupingMcaAttrs
///----------------------------------------------------------------------------
///
/// @struct EffGroupingMcaAttrs
///
/// Contains attributes for an MCA Chiplet (Nimbus only)
///
struct EffGroupingMcaAttrs
{
    ///
    /// @brief Getting attribute of an MCA chiplet
    ///
    /// Function that reads the MCA target attributes and load their
    /// values into the struct.
    ///
    /// @param[in] i_target Reference to MCA chiplet target
    ///
    /// @return FAPI2_RC_SUCCESS if success, else error code.
    ///
    fapi2::ReturnCode getAttrs(
        const fapi2::Target<fapi2::TARGET_TYPE_MCA>& i_target);

    // Unit Position
    uint8_t iv_unitPos = 0;

    // Dimm size behind this MCA
    uint64_t iv_dimmSize = 0;

};

// See doxygen in struct definition.
fapi2::ReturnCode EffGroupingMcaAttrs::getAttrs(
    const fapi2::Target<fapi2::TARGET_TYPE_MCA>& i_target)
{
    FAPI_DBG("Entering EffGroupingMcaAttrs::getAttrs");

    // Get the amount of memory behind this MCA target
    // Note: DIMM must be enabled to be accounted for.
    FAPI_TRY(mss::eff_memory_size(i_target, iv_dimmSize),
             "Error returned from eff_memory_size, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Get the MCA unit position
    FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_CHIP_UNIT_POS, i_target, iv_unitPos),
             "Error getting MCA ATTR_CHIP_UNIT_POS, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // MCA's total dimm size
    FAPI_INF("MCA %u: Total DIMM size %lu GB", iv_unitPos, iv_dimmSize);

fapi_try_exit:
    FAPI_DBG("Exiting EffGroupingMcaAttrs::getAttrs");
    return fapi2::current_err;
}

///----------------------------------------------------------------------------
/// struct EffGroupingDmiAttrs
///----------------------------------------------------------------------------
///
/// @struct EffGroupingDmiAttrs
///
/// Contains attributes for an DMI Chiplet (Cumulus only)
///
struct EffGroupingDmiAttrs
{
    ///
    /// @brief Getting attribute of a DMI chiplet
    ///
    /// Function that reads the DMI target attributes and load their
    /// values into the struct.
    ///
    /// @param[in] i_target Reference to DMI chiplet target
    ///
    /// @return FAPI2_RC_SUCCESS if success, else error code.
    ///
    fapi2::ReturnCode getAttrs(
        const fapi2::Target<fapi2::TARGET_TYPE_DMI>& i_target);

    // Unit Position
    uint8_t iv_unitPos = 0;

    // Dimm size behind this DMI
    uint64_t iv_dimmSize = 0;

    // The membuf chip associated with this DMI
    // (for deconfiguring if cannot group)
    fapi2::Target<fapi2::TARGET_TYPE_MEMBUF_CHIP> iv_membuf;
};

// See doxygen in struct definition.
fapi2::ReturnCode EffGroupingDmiAttrs::getAttrs(
    const fapi2::Target<fapi2::TARGET_TYPE_DMI>& i_target)
{
    FAPI_DBG("Entering EffGroupingDmiAttrs::getAttrs");

    // Get the membuf attached to this DMI
    auto l_attachedMembuf = i_target.getChildren<fapi2::TARGET_TYPE_MEMBUF_CHIP>();

    if (l_attachedMembuf.size() > 0)
    {
        // Set the membuf associated with this DMI, supposed to be only 1
        // Centaur per DMI
        iv_membuf = l_attachedMembuf.front();

        // Get the amount of memory behind this DMI target
        FAPI_TRY(mss::eff_memory_size(i_target, iv_dimmSize),
                 "Error returned from eff_memory_size, l_rc 0x%.8X",
                 (uint64_t)fapi2::current_err);
    }

    // Get the DMI unit position
    FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_CHIP_UNIT_POS, i_target, iv_unitPos),
             "Error getting DMI ATTR_CHIP_UNIT_POS, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Display this DMI's attribute info
    FAPI_INF("EffGroupingDmiAttrs::getAttrs: DMI %d, Centaur attached %d, "
             "iv_dimmSize %d GB ",
             iv_unitPos, l_attachedMembuf.size(), iv_dimmSize);

fapi_try_exit:
    FAPI_DBG("Exiting EffGroupingDmiAttrs::getAttrs");
    return fapi2::current_err;
}


///----------------------------------------------------------------------------
/// struct EffGroupingMemInfo
///----------------------------------------------------------------------------
///
/// @struct EffGroupingMemInfo
/// Contains Memory Information for a processor chip.
///
/// Nimbus - 4 MCS total, 2 MCA ports per MCS, 2 DIMMSs per MCA port
///
///          MCS0 --> MCA port0 --> DIMM0
///                                 DIMM1
///                   MCA port1 --> DIMM0
///                                 DIMM1
///          MCS1 --> MCA port2 --> DIMM0
///                                 DIMM1
///                   MCA port3 --> DIMM0
///                                 DIMM1
///          MCS2 --> MCA port4 --> DIMM0
///                                 DIMM1
///                   MCA port5 --> DIMM0
///                                 DIMM1
///          MCS3 --> MCA port6 --> DIMM0
///                                 DIMM1
///                   MCA port7 --> DIMM0
///                                 DIMM1
///          ----------------------------
///   Total   4           8
///
///
/// Cumulus - 4 MIs total, each MI has 2 DMIs (MC ports) with memBufs
///           connected.
///           Each memBuf has 2 MBAs, each MBA has 2 DRAM ports, each
///           DRAM port has 2 DIMMs
///
///          MI0 --> DMI0 --> memBuf --> MBA01 --> Port0 --> DIMM0
///                                                          DIMM1
///                                                Port1 --> DIMM0
///                                                          DIMM1
///                                      MBA23 --> Port2 --> DIMM0
///                                                          DIMM1
///                                                Port3 --> DIMM0
///                                                          DIMM1
///
///                  DMI1 --> memBuf --> MBA01 --> Port0 --> DIMM0
///                                                          DIMM1
///                                                Port1 --> DIMM0
///                                                          DIMM1
///                                      MBA23 --> Port2 --> DIMM0
///                                                          DIMM1
///                                                Port3 --> DIMM0
///                                                          DIMM1
///          ......
///          ......
///
///          MI3 --> DMI6 --> memBuf --> MBA01 --> Port0 --> DIMM0
///                                                          DIMM1
///                                                Port1 --> DIMM0
///                                                          DIMM1
///                                      MBA23 --> Port2 --> DIMM0
///                                                          DIMM1
///                                                Port3 --> DIMM0
///                                                          DIMM1
///
///                  DMI7 --> memBuf --> MBA01 --> Port0 --> DIMM0
///                                                          DIMM1
///                                                Port1 --> DIMM0
///                                                          DIMM1
///                                      MBA23 --> Port2 --> DIMM0
///                                                          DIMM1
///                                                Port3 --> DIMM0
///                                                          DIMM1
///   ----------------------------------------------------------------
///   Total  4        8
///
struct EffGroupingMemInfo
{
    // Constructor
    EffGroupingMemInfo()
    {
        memset(iv_portSize, 0, sizeof(iv_portSize));
    }

    ///
    /// @brief Gets the memory information of a processor
    ///
    /// @param[in] i_target    Reference to processor chip target
    ///
    /// @return FAPI2_RC_SUCCESS if success, else error code.
    ///
    fapi2::ReturnCode getMemInfo(
        const fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target);

    // Mark if this proc is a Nimbus
    bool iv_nimbusProc = false;

    // Memory sizes behind MC ports
    uint32_t iv_portSize[NUM_MC_PORTS_PER_PROC];

    // maximum group size which can be formed
    uint64_t iv_maxGroupMemSize = 0;
};

// See doxygen in struct definition.
fapi2::ReturnCode EffGroupingMemInfo::getMemInfo (
    const fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target)
{
    FAPI_DBG("Entering");

    // Memory info will be filled in differently for Nimbus vs Cumulus
    // due to chip structure

    // Get the functional MCAs
    auto l_mcaChiplets = i_target.getChildren<fapi2::TARGET_TYPE_MCA>();

    FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_MAX_INTERLEAVE_GROUP_SIZE,
                           fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(),
                           iv_maxGroupMemSize),
             "Error from FAPI_ATTR_GET (ATTR_MAX_INTERLEAVE_GROUP_SIZE)");

    FAPI_DBG("iv_maxGroupMemSize: 0x%016lX", iv_maxGroupMemSize);

    if (l_mcaChiplets.size() > 0)
    {
        FAPI_DBG("Number of MCAs found: %d", l_mcaChiplets.size());

        // MCA found, proc is a Nimbus.
        iv_nimbusProc = true;

        for (auto l_mca : l_mcaChiplets)
        {
            // Get the MCA attributes
            EffGroupingMcaAttrs l_mcaAttrs;
            FAPI_TRY(l_mcaAttrs.getAttrs(l_mca),
                     "l_mcaAttrs.getAttrs() returns error, l_rc 0x%.8X",
                     (uint64_t)fapi2::current_err);
            // Get the mem size behind this MCA
            iv_portSize[l_mcaAttrs.iv_unitPos] = l_mcaAttrs.iv_dimmSize;
        }
    }
    else
    {
        auto l_dmiChiplets = i_target.getChildren<fapi2::TARGET_TYPE_DMI>();

        if (l_dmiChiplets.size() > 0)
        {
            FAPI_DBG("Number of DMIs found: %d", l_dmiChiplets.size());

            // DMI found, proc is a Cumulus.
            for (auto l_dmi : l_dmiChiplets)
            {
                // Get this DMI attribute info
                EffGroupingDmiAttrs l_dmiAttrs;
                FAPI_TRY(l_dmiAttrs.getAttrs(l_dmi),
                         "l_dmiAttrs.getAttrs() returns error, l_rc 0x%.8X",
                         (uint64_t)fapi2::current_err);

                // Fill in memory info
                iv_portSize[l_dmiAttrs.iv_unitPos] = l_dmiAttrs.iv_dimmSize;
            }
        }
        else
        {
            // Note: You may have none of DMI nor MCA but it's a valid state;
            // therefore don't flag an error
            FAPI_INF("No MCA or DMI found in this proc target");
        }
    }

    // Display amount of memory for each MC port
    for (uint8_t ii = 0; ii < NUM_MC_PORTS_PER_PROC; ii++)
    {
        FAPI_INF("MCport[%d] = %d GB", ii, iv_portSize[ii]);
    }

fapi_try_exit:
    FAPI_DBG("Exiting");
    return fapi2::current_err;
}

///----------------------------------------------------------------------------
/// struct EffGroupingData
///----------------------------------------------------------------------------
///
/// @struct EffGroupingData
/// Contains Effective Grouping Data for a processor chip.
///
struct EffGroupingData
{
    // Constructor
    EffGroupingData()
    {
        memset(iv_data, 0, sizeof(iv_data));
        memset(iv_mirrorOn, 0, sizeof(iv_mirrorOn));

        for (uint8_t l_port = 0; l_port < NUM_MC_PORTS_PER_PROC; l_port++)
        {
            iv_portGrouped[l_port] = false;
        }
    }

    // The ATTR_MSS_MCS_GROUP_32 attribute
    uint32_t iv_data[DATA_GROUPS][DATA_ELEMENTS];

    // The ports that have been grouped
    bool iv_portGrouped[NUM_MC_PORTS_PER_PROC];

    // The number of groups
    uint8_t iv_numGroups = 0;

    // The total non-mirrored memory size in GB
    uint32_t iv_totalSizeNonMirr = 0;

    // Indicates if mirror group is to be created
    // from data of this non-mirror group
    uint8_t iv_mirrorOn[DATA_GROUPS / 2];
};


///----------------------------------------------------------------------------
/// struct EffGroupingBaseSizeData
///----------------------------------------------------------------------------
struct EffGroupingBaseSizeData
{
    // Constructor
    EffGroupingBaseSizeData()
    {
        memset(iv_mem_bases, 0, sizeof(iv_mem_bases));
        memset(iv_mem_bases_ack, 0, sizeof(iv_mem_bases_ack));
        memset(iv_memory_sizes, 0, sizeof(iv_memory_sizes));
        memset(iv_memory_sizes_ack, 0, sizeof(iv_memory_sizes_ack));
        memset(iv_mirror_bases, 0, sizeof(iv_mirror_bases));
        memset(iv_mirror_bases_ack, 0, sizeof(iv_mirror_bases_ack));
        memset(iv_mirror_sizes, 0, sizeof(iv_mirror_sizes));
        memset(iv_mirror_sizes_ack, 0, sizeof(iv_mirror_sizes_ack));
        memset(iv_chtm_bar_bases, 0, sizeof(iv_chtm_bar_bases));
        memset(iv_numHtmQueues, 0, sizeof(iv_numHtmQueues));
    }

    ///
    /// @brief setBaseSizeData
    /// Function that set base and size values for both mirror
    /// and non-mirror.
    ///
    /// @param[in] i_sysAttrs    System attribute settings
    /// @param[in] i_groupData   Effective grouping data info
    ///
    /// @return void.
    ///
    void setBaseSizeData(const EffGroupingSysAttrs& i_sysAttrs,
                         const EffGroupingData& i_groupData);

    ///
    /// @brief Figure out which memory region (index) an address belongs to.
    ///
    /// @param[in]  i_addr         Given address
    /// @param[in]  i_sysAttrs     System attribute settings
    /// @param[out] o_accMemSize   Accumulated memory size to cover address
    ///
    /// @return Memory region index where i_addr belongs to.
    ///
    uint8_t getMemoryRegionIndex(const uint64_t i_addr,
                                 const EffGroupingSysAttrs& i_sysAttrs,
                                 uint64_t& o_accMemSize);

    ///
    /// @brief Calculate then assign the number of HTM queues for each
    ///        channel.  This is done for performance purpose when dumping
    ///        out HTM traces.
    ///
    /// @param[in] i_groupData      Effective grouping data info
    /// @param[in] i_startHtmIndex  Start HTM group index
    /// @param[in] i_endHtmIndex    End HTM group index
    ///
    /// @return void
    ///
    void calcHtmQueues(const EffGroupingData& i_groupData,
                       const uint64_t i_startHtmIndex,
                       const uint64_t i_endHtmIndex);

    // Calculate # of HTM queues to be reserved
    // To improve trace performance, we need to reserve HTM queues on
    // the channels that serve HTM trace space.
    // The # of queues will be 16 (maximum) divided by the # of ports

    ///
    /// @brief Setting HTM and OCC base address based on HTM/OCC bar size
    ///
    /// @param[in] i_target       Reference to Processor Chip Target
    /// @param[in] i_sysAttrs     System attribute settings
    /// @param[in] i_groupData    Effective grouping data info
    /// @param[in] i_procAttrs    Proc attribute values
    ///
    /// @return FAPI2_RC_SUCCESS if success, else error code.
    ///
    fapi2::ReturnCode set_HTM_OCC_base_addr(
        const fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target,
        const EffGroupingSysAttrs& i_sysAttrs,
        const EffGroupingData& i_groupData,
        const EffGroupingProcAttrs& i_procAttrs);

    ///
    /// @brief setBaseSizeAttr
    /// Function that set base and size attribute values for both mirror
    /// and non-mirror based on given base/size data.
    ///
    /// @param[in]     i_target      Reference to Processor Chip Target
    /// @param[in]     i_sysAttrs    System attribute settings
    /// @param[in/out] i_groupData   Effective grouping data info
    ///
    /// @return FAPI2_RC_SUCCESS if success, else error code.
    ///
    fapi2::ReturnCode setBaseSizeAttr(
        const fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target,
        const EffGroupingSysAttrs& i_sysAttrs,
        EffGroupingData& io_groupData);

    // Public data
    uint64_t iv_mem_bases[NUM_NON_MIRROR_REGIONS];
    uint64_t iv_mem_bases_ack[NUM_NON_MIRROR_REGIONS];
    uint64_t iv_memory_sizes[NUM_NON_MIRROR_REGIONS];
    uint64_t iv_memory_sizes_ack[NUM_NON_MIRROR_REGIONS];

    uint64_t iv_mirror_bases[NUM_MIRROR_REGIONS];
    uint64_t iv_mirror_bases_ack[NUM_MIRROR_REGIONS];
    uint64_t iv_mirror_sizes[NUM_MIRROR_REGIONS];
    uint64_t iv_mirror_sizes_ack[NUM_MIRROR_REGIONS];

    uint64_t iv_occ_sandbox_base = 0;
    uint64_t iv_nhtm_bar_base = 0;
    uint64_t iv_chtm_bar_bases[NUM_OF_CHTM_REGIONS];

    // Num of HTM queues to be reserved for each port
    uint8_t iv_numHtmQueues[NUM_MC_PORTS_PER_PROC];
};

// See description in struct definition
void EffGroupingBaseSizeData::setBaseSizeData(
    const EffGroupingSysAttrs& i_sysAttrs,
    const EffGroupingData& i_groupData)
{
    FAPI_DBG("Entering");

    // Process non-mirrored ranges
    for (uint8_t ii = 0; ii < (DATA_GROUPS / 2); ii++) // 0-7 --> Non mirror
    {
        // Base addresses for distinct non-mirrored ranges
        iv_mem_bases[ii]     = i_groupData.iv_data[ii][BASE_ADDR];
        iv_mem_bases_ack[ii] = i_groupData.iv_data[ii][BASE_ADDR];
        iv_memory_sizes[ii]  = i_groupData.iv_data[ii][PORT_SIZE] *
                               i_groupData.iv_data[ii][PORTS_IN_GROUP];
        iv_memory_sizes_ack[ii] = i_groupData.iv_data[ii][GROUP_SIZE];

        // Convert to full byte addresses
        iv_mem_bases[ii]        <<= 30;
        iv_mem_bases_ack[ii]    <<= 30;
        iv_memory_sizes[ii]     <<= 30;
        iv_memory_sizes_ack[ii] <<= 30;

        FAPI_DBG("Non-mirror, Group %d:", ii);
        FAPI_DBG("    i_groupData.iv_data[%d][BASE_ADDR] = %d",
                 ii,  i_groupData.iv_data[ii][BASE_ADDR]);
        FAPI_DBG("    i_groupData.iv_data[%d][PORT_SIZE] = %d",
                 ii,  i_groupData.iv_data[ii][PORT_SIZE]);
        FAPI_DBG("    i_groupData.iv_data[%d][PORTS_IN_GROUP] = %d",
                 ii,  i_groupData.iv_data[ii][PORTS_IN_GROUP]);

        FAPI_DBG("    iv_mem_bases[%d] = 0x%.16llX (%d GB)",
                 ii, iv_mem_bases[ii], iv_mem_bases[ii] >> 30);
        FAPI_DBG("    iv_mem_bases_ack[%d] = 0x%.16llX (%d GB)",
                 ii, iv_mem_bases_ack[ii], iv_mem_bases_ack[ii] >> 30);
        FAPI_DBG("    iv_memory_sizes[%d] = %.16lld bytes (%d GB)",
                 ii, iv_memory_sizes[ii], iv_memory_sizes[ii] >> 30);
        FAPI_DBG("    iv_memory_sizes_ack[%d] = %.16lld bytes (%d GB)",
                 ii, iv_memory_sizes_ack[ii], iv_memory_sizes_ack[ii] >> 30);
    }

    // Process mirrored ranges
    if (i_sysAttrs.iv_hwMirrorEnabled)
    {
        for (uint8_t ii = 0; ii < NUM_MIRROR_REGIONS; ii++)
        {
            uint8_t l_index = ii + MIRR_OFFSET;

            if (i_groupData.iv_data[l_index][PORTS_IN_GROUP] != 0)
            {
                // Set base address for distinct mirrored ranges
                iv_mirror_bases[ii] = i_groupData.iv_data[l_index][BASE_ADDR];
                iv_mirror_bases_ack[ii] = i_groupData.iv_data[l_index][BASE_ADDR];
                // Set sizes for distinct mirrored ranges
                iv_mirror_sizes[ii] = (i_groupData.iv_data[ii][PORT_SIZE] *
                                       i_groupData.iv_data[ii][PORTS_IN_GROUP]) / 2;
                iv_mirror_sizes_ack[ii] = i_groupData.iv_data[l_index][GROUP_SIZE];

                // Convert to full byte addresses
                iv_mirror_bases[ii]     <<= 30;
                iv_mirror_bases_ack[ii] <<= 30;
                iv_mirror_sizes[ii]     <<= 30;
                iv_mirror_sizes_ack[ii] <<= 30;
            }

            FAPI_DBG("Mirror: %d", ii);
            FAPI_DBG("    i_groupData.iv_data[%d][BASE_ADDR] = 0x%.16llX (%d GB)",
                     l_index,  i_groupData.iv_data[l_index][BASE_ADDR],
                     i_groupData.iv_data[l_index][BASE_ADDR] >> 30);
            FAPI_DBG("    i_groupData.iv_data[%d][PORTS_IN_GROUP] = %d",
                     l_index,  i_groupData.iv_data[l_index][PORTS_IN_GROUP]);
            FAPI_DBG("    i_groupData.iv_data[%d][PORT_SIZE] = %d",
                     l_index, i_groupData.iv_data[l_index][PORT_SIZE]);

            FAPI_DBG("    iv_mirror_bases[%d] = 0x%.16llX (%d GB)",
                     ii, iv_mirror_bases[ii], iv_mirror_bases[ii] >> 30);
            FAPI_DBG("    iv_mirror_bases_ack[%d] = 0x%.16llX (%d GB)",
                     ii, iv_mirror_bases_ack[ii], iv_mirror_bases_ack[ii] >> 30);
            FAPI_DBG("    iv_mirror_sizes[%d] = %.16lld bytes (%d GB)",
                     ii, iv_mirror_sizes[ii], iv_mirror_sizes[ii] >> 30);
            FAPI_DBG("    iv_mirror_sizes_ack[%d] = %.16lld bytes (%d GB)",
                     ii, iv_mirror_sizes_ack[ii], iv_mirror_sizes_ack[ii] >> 30);
        }
    }

    FAPI_DBG("Exiting");
    return;
}

// See description in struct definition
uint8_t EffGroupingBaseSizeData::getMemoryRegionIndex(
    const uint64_t i_addr,
    const EffGroupingSysAttrs& i_sysAttrs,
    uint64_t& o_accMemSize)
{
    uint8_t l_index = 0xFF;
    uint8_t l_numRegions = 0;
    uint64_t* l_memSizePtr = NULL;
    uint64_t l_startBaseAddr = 0;

    FAPI_DBG("Entering EffGroupingBaseSizeData::getMemoryRegionIndex: "
             "i_addr = %.16lld bytes (%d GB)",  i_addr,  i_addr >> 30);

    // Point to non-mirror or mirror memory data
    l_memSizePtr = &iv_memory_sizes[0];
    l_numRegions = NUM_NON_MIRROR_REGIONS;
    l_startBaseAddr = iv_mem_bases[0];

    if (i_sysAttrs.iv_selectiveMode ==
        fapi2::ENUM_ATTR_MEM_MIRROR_PLACEMENT_POLICY_FLIPPED)
    {
        l_memSizePtr = &iv_mirror_sizes[0] ;
        l_numRegions = NUM_MIRROR_REGIONS;
        l_startBaseAddr = iv_mirror_bases[0];
    }

    FAPI_DBG(" Start base addr: %.16lld (%d GB), Num regions %d",
             l_startBaseAddr, l_startBaseAddr >> 30, l_numRegions);

    o_accMemSize = 0;

    for (uint8_t ii = 0; ii < l_numRegions; ii++)
    {
        // If mem available in region, add them up
        if ( (*l_memSizePtr) > 0 )
        {
            o_accMemSize += (*l_memSizePtr);

            FAPI_DBG("ii = %d, o_accMemSize = %.16lld (%d GB)",
                     ii, o_accMemSize, o_accMemSize >> 30);

            if ( (l_startBaseAddr + o_accMemSize) >= i_addr )
            {
                l_index = ii;
                break;
            }
        }

        // Passed last region (no more memory). This is the case where
        // ALT_MEM exists, just return highest region index that contains memory.
        else
        {
            l_index = ii - 1;
            break;
        }

        // Point to next region
        l_memSizePtr++;
    }

    FAPI_INF("Exiting - Index = %d, , o_accAddrValue = %.16lld (%d GB)",
             l_index,  o_accMemSize, o_accMemSize >> 30);

    return l_index;
}

// See description in struct definition
void EffGroupingBaseSizeData::calcHtmQueues(const EffGroupingData& i_groupData,
        const uint64_t i_startHtmIndex,
        const uint64_t i_endHtmIndex)
{
    // To improve trace performance, we need to reserve HTM queues on
    // the channels that serve HTM trace space.

    // Number of ports from HTM start -> HTM end
    uint8_t l_totalPorts = 0;

    for (uint8_t ii = i_startHtmIndex; ii <= i_endHtmIndex; ii++)
    {
        l_totalPorts += i_groupData.iv_data[ii][PORTS_IN_GROUP];
    }

    // Spread the queues evenly to all the ports that serve HTM
    // Each will have max queues (16) divided by the # of ports
    uint8_t l_numQueues =  MAX_HTM_QUEUE_PER_PORT / l_totalPorts;

    FAPI_DBG("l_totalPorts = %d, l_numQueues %d", l_totalPorts, l_numQueues);

    // Set the queues to the port array
    for (uint8_t ii = i_startHtmIndex; ii <= i_endHtmIndex; ii++)
    {
        // Ports in group loop
        for (uint8_t l_memberIdx = 0;
             l_memberIdx < i_groupData.iv_data[ii][PORTS_IN_GROUP]; l_memberIdx++)
        {
            uint8_t jj = i_groupData.iv_data[ii][MEMBER_IDX(0) + l_memberIdx];
            iv_numHtmQueues[jj] = l_numQueues;
        }
    }

    return;
}

// See description in struct definition
fapi2::ReturnCode EffGroupingBaseSizeData::set_HTM_OCC_base_addr(
    const fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target,
    const EffGroupingSysAttrs& i_sysAttrs,
    const EffGroupingData& i_groupData,
    const EffGroupingProcAttrs& i_procAttrs)
{
    FAPI_DBG("Entering");

    // Hold mem bases & sizes for mirror/non-mirror
    uint8_t l_numRegions = 0;
    uint64_t l_mem_bases[NUM_NON_MIRROR_REGIONS];
    uint64_t l_mem_sizes[NUM_NON_MIRROR_REGIONS];
    uint64_t l_totalSize = 0;
    uint8_t l_memHole = 0;
    uint8_t l_index = 0;
    uint64_t l_accMemSize = 0;
    uint64_t l_memSizeAfterHtmOcc = 0;
    bool l_firstEnabledChtm = false;
    uint8_t l_prevEnabledChtm = 0;
    uint8_t l_start_htm_index = 0;
    uint8_t l_end_htm_index = 0;

    // Calculate OCC/HTM requested space
    uint64_t l_nhtmSize = i_procAttrs.iv_nhtmBarSize;
    uint64_t l_chtmSize = 0;

    for (uint8_t ii = 0; ii < NUM_OF_CHTM_REGIONS; ii++)
    {
        l_chtmSize += i_procAttrs.iv_chtmBarSizes[ii];
    }

    uint64_t l_htmOccSize = l_nhtmSize + l_chtmSize +
                            i_procAttrs.iv_occSandboxSize;

    FAPI_INF("Selective Mode %d", i_sysAttrs.iv_selectiveMode);
    FAPI_INF("l_nhtmSize %.16lld bytes (%d GB), l_chtmSize %.16lld bytes (%d GB) ",
             l_nhtmSize,  l_nhtmSize >> 30, l_chtmSize, l_chtmSize >> 30);
    FAPI_INF("OccSize %.16lld bytes (%d GB)",
             i_procAttrs.iv_occSandboxSize, i_procAttrs.iv_occSandboxSize >> 30);

    // No HTM/OCC space requested, exit
    if (l_htmOccSize == 0)
    {
        FAPI_INF("set_HTM_OCC_base_addr: No HTM/OCC memory requested.");
        goto fapi_try_exit;
    }

    // Setup mem base and size working array depending on mirror setting
    if (i_sysAttrs.iv_selectiveMode ==
        fapi2::ENUM_ATTR_MEM_MIRROR_PLACEMENT_POLICY_NORMAL)   // Normal
    {
        l_numRegions = NUM_NON_MIRROR_REGIONS;
        memcpy(l_mem_bases, iv_mem_bases, sizeof(iv_mem_bases));
        memcpy(l_mem_sizes, iv_memory_sizes,  sizeof(iv_memory_sizes));
    }
    else // Flipped
    {
        l_numRegions = NUM_MIRROR_REGIONS;
        memcpy(l_mem_bases, iv_mirror_bases, sizeof(iv_mirror_bases));
        memcpy(l_mem_sizes, iv_mirror_sizes, sizeof(iv_mirror_sizes));
    }

    // Calculate total available memory
    for (uint8_t ii = 0; ii < l_numRegions; ii++)
    {
        l_totalSize += l_mem_sizes[ii];

        for (uint8_t jj = 0; jj < NUM_OF_ALT_MEM_REGIONS; jj++)
        {
            if (i_groupData.iv_data[ii][ALT_VALID(jj)])
            {
                l_memHole++;
            }
        }
    }

    FAPI_INF("Total memory size = %.16lld bytes (%d GB) , l_memHole %d",
             l_totalSize, l_totalSize >> 30, l_memHole);

    // Error if total memory is not enough for requested HTM & OCC
    FAPI_ASSERT(l_totalSize >= l_htmOccSize,
                fapi2::MSS_EFF_GROUPING_NO_SPACE_FOR_HTM_OCC_BAR()
                .set_TOTAL_SIZE(l_totalSize)
                .set_NHTM_TOTAL_BAR_SIZE(l_nhtmSize)
                .set_CHTM_TOTAL_BAR_SIZE(l_chtmSize)
                .set_OCC_SANDBOX_BAR_SIZE(i_procAttrs.iv_occSandboxSize)
                .set_MIRROR_PLACEMENT_POLICY(i_sysAttrs.iv_selectiveMode),
                "EffGroupingBaseSizeData::set_HTM_OCC_base_addr: Required memory "
                "space for the HTM and OCC SANDBOX BARS is not available. "
                "Placement policy %u, TotalSize 0x%.16llX, HtmOccSize 0x%.16llX",
                i_sysAttrs.iv_selectiveMode, l_totalSize, l_htmOccSize);

    // Calculate which memory region the HTM & OCC memory starts
    l_memSizeAfterHtmOcc = l_totalSize - l_htmOccSize;
    FAPI_DBG("Memsize available after HTM/OCC: %.16lld (%d GB)",
             l_memSizeAfterHtmOcc, l_memSizeAfterHtmOcc >> 30);

    l_index = getMemoryRegionIndex(l_memSizeAfterHtmOcc + l_mem_bases[0],
                                   i_sysAttrs,
                                   l_accMemSize);

    // Adjusted memory size for region where OCC/HTM starts
    l_mem_sizes[l_index] = l_mem_sizes[l_index] -
                           (l_accMemSize - l_memSizeAfterHtmOcc);

    FAPI_DBG("Adjusted memsize at index - l_mem_sizes[%d] = %.16lld (%d GB)",
             l_index,  l_mem_sizes[l_index], l_mem_sizes[l_index] >> 30);

    if (l_memHole)
    {
        FAPI_ASSERT(l_mem_sizes[l_index] >= l_htmOccSize,
                    fapi2::MSS_EFF_GROUPING_HTM_OCC_BAR_NOT_POSSIBLE()
                    .set_AJUSTED_SIZE(l_mem_sizes[l_index])
                    .set_NHTM_TOTAL_BAR_SIZE(l_nhtmSize)
                    .set_CHTM_TOTAL_BAR_SIZE(l_chtmSize)
                    .set_OCC_SANDBOX_BAR_SIZE(i_procAttrs.iv_occSandboxSize)
                    .set_MIRROR_PLACEMENT_POLICY(i_sysAttrs.iv_selectiveMode),
                    "EffGroupingBaseSizeData::set_HTM_OCC_base_addr: Memory HTM/OCC "
                    "BAR not possible, Placement policy %u, "
                    "MemorySizes[%d] 0x%.16llX, HtmOccSize 0x%.16llX",
                    i_sysAttrs.iv_selectiveMode, l_index, l_mem_sizes[l_index],
                    l_htmOccSize);
    }

    // Setting NHTM & OCC base addresses
    if ( (l_nhtmSize + l_chtmSize) < i_procAttrs.iv_occSandboxSize)
    {
        iv_occ_sandbox_base = l_mem_bases[l_index] + l_mem_sizes[l_index];
        iv_nhtm_bar_base = iv_occ_sandbox_base + i_procAttrs.iv_occSandboxSize;
    }
    else
    {
        iv_nhtm_bar_base = l_mem_bases[l_index] + l_mem_sizes[l_index];
        iv_occ_sandbox_base = iv_nhtm_bar_base + l_nhtmSize + l_chtmSize;
    }

    // Setting CHTM base addresses
    for (uint8_t ii = 0; ii < NUM_OF_CHTM_REGIONS; ii++)
    {
        if (i_procAttrs.iv_chtmBarSizes[ii] != 0)
        {
            if (l_firstEnabledChtm == false)
            {
                iv_chtm_bar_bases[ii] = iv_nhtm_bar_base +
                                        i_procAttrs.iv_nhtmBarSize;
                l_firstEnabledChtm = true;
            }
            else
            {
                iv_chtm_bar_bases[ii] = iv_chtm_bar_bases[l_prevEnabledChtm] +
                                        i_procAttrs.iv_chtmBarSizes[l_prevEnabledChtm];
            }

            l_prevEnabledChtm = ii;
        }
    }

    // Calculate num of HTM queues to reserve for each channel
    if ( (l_nhtmSize + l_chtmSize) > 0 )
    {
        l_start_htm_index = getMemoryRegionIndex(iv_nhtm_bar_base,
                            i_sysAttrs,
                            l_accMemSize);
        l_end_htm_index = getMemoryRegionIndex(iv_nhtm_bar_base + l_nhtmSize,
                                               i_sysAttrs,
                                               l_accMemSize);

        FAPI_INF("Start HTM index: %d, End HTM index = %d",
                 l_start_htm_index, l_end_htm_index);

        calcHtmQueues(i_groupData, l_start_htm_index, l_end_htm_index);
    }

    // Zero out memory size of regions used by OCC/HTM
    for (uint8_t ii = l_index + 1; ii < l_numRegions; ii++)
    {
        l_mem_sizes[ii] = 0;
    }

    // Update mem sizes with working array values
    if (l_numRegions == NUM_NON_MIRROR_REGIONS)
    {
        memcpy(iv_memory_sizes, l_mem_sizes, sizeof(iv_memory_sizes));
    }
    else
    {
        memcpy(iv_mirror_sizes, l_mem_sizes, sizeof(iv_mirror_sizes));
    }

    // Result traces
    FAPI_INF("EffGroupingBaseSizeData::set_HTM_OCC_base_addr");
    FAPI_INF("  Placement policy %u, total mem %.16lld (%d GB), HtmOccSize %.16lld (%d GB)",
             i_sysAttrs.iv_selectiveMode, l_totalSize, l_totalSize >> 30,
             l_htmOccSize, l_htmOccSize >> 30);
    FAPI_INF("  Index: %d, iv_mem_bases 0x%.16llX, iv_memory_sizes 0x%.16llX",
             l_index, l_mem_bases[l_index], l_mem_sizes[l_index]);

    FAPI_INF("NHTM_BASE  %.16lld (%d GB)", iv_nhtm_bar_base, iv_nhtm_bar_base >> 30);

    for (uint8_t ii = 0; ii < NUM_OF_CHTM_REGIONS; ii++)
    {
        FAPI_INF("CHTM_BASE[%u] = %.16lld (%d GB)", ii, iv_chtm_bar_bases[ii],
                 iv_chtm_bar_bases[ii] >> 30);
    }

    FAPI_INF("OCC_BASE  %.16lld (%d GB)", iv_occ_sandbox_base, iv_occ_sandbox_base >> 30);

fapi_try_exit:
    FAPI_DBG("Exiting");
    return fapi2::current_err;
}


// See description in struct definition
fapi2::ReturnCode EffGroupingBaseSizeData::setBaseSizeAttr(
    const fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target,
    const EffGroupingSysAttrs& i_sysAttrs,
    EffGroupingData& io_groupData)
{
    FAPI_DBG("Entering");

    //----------------------------------------------------------------------
    //  Setting attributes
    //----------------------------------------------------------------------

    // Set ATTR_PROC_MEM_BASES
    FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_PROC_MEM_BASES, i_target, iv_mem_bases),
             "Error setting ATTR_PROC_MEM_BASES, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Set ATTR_PROC_MEM_BASES_ACK
    FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_PROC_MEM_BASES_ACK, i_target, iv_mem_bases_ack),
             "Error setting ATTR_PROC_MEM_BASES_ACK, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Set ATTR_PROC_MEM_SIZES
    FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_PROC_MEM_SIZES, i_target, iv_memory_sizes),
             "Error setting ATTR_PROC_MEM_SIZES, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Set ATTR_PROC_MEM_SIZES_ACK
    FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_PROC_MEM_SIZES_ACK, i_target,
                           iv_memory_sizes_ack),
             "Error setting ATTR_PROC_MEM_SIZES_ACK, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Set ATTR_MSS_MCS_GROUP_32
    FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_MSS_MCS_GROUP_32, i_target,
                           io_groupData.iv_data),
             "Error setting ATTR_MSS_MCS_GROUP_32, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Set ATTR_PROC_NHTM_BAR_BASE_ADDR
    FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_PROC_NHTM_BAR_BASE_ADDR, i_target,
                           iv_nhtm_bar_base),
             "Error setting ATTR_PROC_HTM_BAR_BASE_ADDR, "
             "l_rc 0x%.8X", (uint64_t)fapi2::current_err);

    // Set ATTR_PROC_CHTM_BAR_BASE_ADDR
    FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_PROC_CHTM_BAR_BASE_ADDR, i_target,
                           iv_chtm_bar_bases),
             "Error setting ATTR_PROC_CHTM_BAR_BASE_ADDR, "
             "l_rc 0x%.8X", (uint64_t)fapi2::current_err);

    // Set ATTR_PROC_OCC_SANDBOX_BASE_ADDR
    FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_PROC_OCC_SANDBOX_BASE_ADDR, i_target,
                           iv_occ_sandbox_base),
             "Error setting ATTR_PROC_OCC_SANDBOX_BASE_ADDR, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Mirror mode attribute setting
    if (i_sysAttrs.iv_hwMirrorEnabled)
    {

        // Set ATTR_PROC_MIRROR_BASES
        FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_PROC_MIRROR_BASES, i_target,
                               iv_mirror_bases),
                 "Error setting ATTR_PROC_MIRROR_BASES, l_rc 0x%.8X",
                 (uint64_t)fapi2::current_err);

        // Set ATTR_PROC_MIRROR_BASES_ACK
        FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_PROC_MIRROR_BASES_ACK, i_target,
                               iv_mirror_bases_ack),
                 "Error setting ATTR_PROC_MIRROR_BASES_ACK, l_rc 0x%.8X",
                 (uint64_t)fapi2::current_err);

        // Set ATTR_PROC_MIRROR_SIZES
        FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_PROC_MIRROR_SIZES, i_target,
                               iv_mirror_sizes),
                 "Error setting ATTR_PROC_MIRROR_SIZES, l_rc 0x%.8X",
                 (uint64_t)fapi2::current_err);

        // Set ATTR_PROC_MIRROR_SIZES_ACK
        FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_PROC_MIRROR_SIZES_ACK, i_target,
                               iv_mirror_sizes_ack),
                 "Error setting ATTR_PROC_MIRROR_SIZES_ACK, l_rc 0x%.8X",
                 (uint64_t)fapi2::current_err);
    }

    // Set ATTR_HTM_QUEUES
    FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_HTM_QUEUES, i_target, iv_numHtmQueues),
             "Error setting ATTR_HTM_QUEUES, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    //----------------------------------------------------------------------
    //  Display attribute values
    //----------------------------------------------------------------------
    for (uint8_t ii = 0; ii < NUM_NON_MIRROR_REGIONS; ii++)
    {
        FAPI_INF("ATTR_PROC_MEM_BASES    [%u]: 0x%.16llX (%d GB)",
                 ii, iv_mem_bases[ii],  iv_mem_bases[ii] >> 30);
        FAPI_INF("ATTR_PROC_MEM_BASES_ACK[%u]: 0x%.16llX (%d GB)",
                 ii, iv_mem_bases_ack[ii], iv_mem_bases_ack[ii] >> 30);
        FAPI_INF("ATTR_PROC_MEM_SIZES    [%u]: 0x%.16llX (%d GB)",
                 ii, iv_memory_sizes[ii], iv_memory_sizes[ii] >> 30);
        FAPI_INF("ATTR_PROC_MEM_SIZES_ACK[%u]: 0x%.16llX (%d GB)",
                 ii, iv_memory_sizes_ack[ii], iv_memory_sizes_ack[ii] >> 30);
    }

    FAPI_INF("ATTR_PROC_NHTM_BAR_BASE_ADDR : 0x%.16llX (%d GB)",
             iv_nhtm_bar_base, iv_nhtm_bar_base >> 30);

    for (uint8_t ii = 0; ii < NUM_OF_CHTM_REGIONS; ii++)
    {
        FAPI_INF("ATTR_PROC_CHTM_BAR_BASE_ADDR[%u] : 0x%.16llX (%d GB)",
                 ii, iv_chtm_bar_bases[ii], iv_chtm_bar_bases[ii] >> 30);
    }

    FAPI_INF("ATTR_PROC_OCC_SANDBOX_BASE_ADDR: 0x%.16llX (%d GB)",
             iv_occ_sandbox_base, iv_occ_sandbox_base >> 30);

    // Display mirror mode attribute values
    if (i_sysAttrs.iv_hwMirrorEnabled)
    {
        for (uint8_t ii = 0; ii < NUM_MIRROR_REGIONS; ii++)
        {
            FAPI_INF("ATTR_PROC_MIRROR_BASES[%u]: 0x%.16llX (%d GB)",
                     ii, iv_mirror_bases[ii], iv_mirror_bases[ii] >> 30);
        }

        for (uint8_t ii = 0; ii < NUM_MIRROR_REGIONS; ii++)
        {
            FAPI_INF("ATTR_PROC_MIRROR_BASES_ACK[%u] "
                     "0x%.16llX (%d GB)",
                     ii, iv_mirror_bases_ack[ii], iv_mirror_bases_ack[ii] >> 30);
        }

        for (uint8_t ii = 0; ii < NUM_MIRROR_REGIONS; ii++)
        {
            FAPI_INF("ATTR_PROC_MIRROR_SIZES[%u]: 0x%.16llX (%d GB)",
                     ii, iv_mirror_sizes[ii], iv_mirror_sizes[ii] >> 30);
        }

        for (uint8_t ii = 0; ii < NUM_MIRROR_REGIONS; ii++)
        {
            FAPI_INF("ATTR_PROC_MIRROR_SIZES_ACK[%u]: 0x%.16llX (%d GB)",
                     ii, iv_mirror_sizes_ack[ii], iv_mirror_sizes_ack[ii] >> 30);
        }
    }

    // Display ATTR_HTM_QUEUES
    FAPI_INF("Num of HTM queues:");

    for (uint8_t ii = 0; ii < NUM_MC_PORTS_PER_PROC; ii++)
    {
        FAPI_INF("ATTR_HTM_QUEUES[%u]: %d", ii, iv_numHtmQueues[ii]);
    }

    // Display ATTR_MSS_MCS_GROUP_32 as debug trace
    for (uint8_t ii = 0; ii < DATA_GROUPS; ii++)
    {
        for (uint8_t jj = 0; jj < DATA_ELEMENTS; jj++)
        {
            FAPI_DBG("ATTR_MSS_MCS_GROUP_32[%u][%u] : 0x%.8X",
                     ii, jj, io_groupData.iv_data[ii][jj]);
        }
    }

fapi_try_exit:
    FAPI_DBG("Exiting ...");
    return fapi2::current_err;
}

///----------------------------------------------------------------------------
/// Function definitions
///----------------------------------------------------------------------------

///
/// @brief grouping_checkValidAttributes
/// Function that checks to make sure the obtained memory grouping
//  attributes are valid.
///
/// @param[in] i_target    Reference to Processor Chip Target
/// @param[in] i_sysAttrs  Reference to system attributes
/// @param[in] i_procAttrs Reference to proc chip attributes
///
/// @return FAPI2_RC_SUCCESS if success, else error code.
///
fapi2::ReturnCode grouping_checkValidAttributes(
    const fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target,
    const EffGroupingSysAttrs& i_sysAttrs,
    const EffGroupingProcAttrs& i_procAttrs)
{
    FAPI_DBG("Entering");

    // If mirror is disabled, then can not be in FLIPPED mode
    if (!i_sysAttrs.iv_hwMirrorEnabled)
    {
        FAPI_ASSERT(i_sysAttrs.iv_selectiveMode !=
                    fapi2::ENUM_ATTR_MEM_MIRROR_PLACEMENT_POLICY_FLIPPED,
                    fapi2::MSS_EFF_CONFIG_MIRROR_DISABLED()
                    .set_MRW_HW_MIRRORING_ENABLE(i_sysAttrs.iv_hwMirrorEnabled)
                    .set_MIRROR_PLACEMENT_POLICY(i_sysAttrs.iv_selectiveMode),
                    "grouping_checkValidAttributes: Error: Mirroring disabled "
                    "but ATTR_MEM_MIRROR_PLACEMENT_POLICY is in FLIPPED mode");
    }

    // There must be at least one type of grouping allowed
    // Unused bits are don't care (i.e.: 0x10, 040)
    FAPI_ASSERT( ((i_sysAttrs.iv_groupsAllowed & ALL_GROUPS) != 0),
                 fapi2::MSS_EFF_GROUPING_NO_GROUP_ALLOWED()
                 .set_MSS_INTERLEAVE_ENABLE_VALUE(i_sysAttrs.iv_groupsAllowed)
                 .set_CHIP(i_target),
                 "grouping_checkValidAttributes: No valid group type allowed" );

fapi_try_exit:
    FAPI_DBG("Exiting");
    return fapi2::current_err;
}

///
/// @brief Attempts to group 8 ports per group
///
/// If they can be grouped, fills in the following fields in o_groupData:
///  - iv_data[<group>][PORT_SIZE]
///  - iv_data[<group>][PORTS_IN_GROUP]
///  - iv_data[<group>][GROUP_SIZE]
///  - iv_data[<group>][MEMBER_IDX(<members>)]
///  - iv_portGrouped[<group>]
///  - iv_numGroups
///
///  @param[in]  i_memInfo   Reference to EffGroupingMemInfo structure
///  @param[out] o_groupData Reference to output data
///
void grouping_group8PortsPerGroup(const EffGroupingMemInfo& i_memInfo,
                                  EffGroupingData& o_groupData)
{
    // There are 8 MC ports (MCA/DMI) in a proc (Nimbus/Cumulus) and they can
    // be grouped together if they all have the same memory size (assumed
    // that no ports have already been grouped
    FAPI_DBG("Entering");

    FAPI_INF("grouping_group8PortsPerGroup: Attempting to group 8 MC ports");
    uint8_t& g = o_groupData.iv_numGroups;

    if ( i_memInfo.iv_portSize[0] != 0 )
    {
        // First MC port has memory
        bool grouped = true;

        for (uint8_t l_pos = 1; l_pos < NUM_MC_PORTS_PER_PROC; l_pos++)
        {
            if (i_memInfo.iv_portSize[0] != i_memInfo.iv_portSize[l_pos])
            {
                // This group port does not have the same size as port 0
                // Can't group by 8
                FAPI_DBG("Can not group by 8: ");
                FAPI_DBG("   i_memInfo.iv_portSize[0] = %d GB", i_memInfo.iv_portSize[0]);
                FAPI_DBG("   i_memInfo.iv_portSize[%d] = %d GB",
                         l_pos, i_memInfo.iv_portSize[l_pos]);
                grouped = false;
                break;
            }
        }

        // Group of 8 is possible
        if (grouped &&
            ((8 * i_memInfo.iv_portSize[0]) <= i_memInfo.iv_maxGroupMemSize))
        {
            // All 8 ports have same amount of memory, group them
            o_groupData.iv_data[g][PORT_SIZE] = i_memInfo.iv_portSize[0];
            o_groupData.iv_data[g][PORTS_IN_GROUP] = 8;
            o_groupData.iv_data[g][GROUP_SIZE] = (NUM_MC_PORTS_PER_PROC * i_memInfo.iv_portSize[0]);
            o_groupData.iv_data[g][MEMBER_IDX(0)] = MCPORTID_0;
            o_groupData.iv_data[g][MEMBER_IDX(1)] = MCPORTID_4;
            o_groupData.iv_data[g][MEMBER_IDX(2)] = MCPORTID_2;
            o_groupData.iv_data[g][MEMBER_IDX(3)] = MCPORTID_6;
            o_groupData.iv_data[g][MEMBER_IDX(4)] = MCPORTID_1;
            o_groupData.iv_data[g][MEMBER_IDX(5)] = MCPORTID_5;
            o_groupData.iv_data[g][MEMBER_IDX(6)] = MCPORTID_3;
            o_groupData.iv_data[g][MEMBER_IDX(7)] = MCPORTID_7;
            g++; // increase o_groupData.iv_numGroups

            // Record which MC ports were grouped
            for (uint8_t ii = 0; ii < NUM_MC_PORTS_PER_PROC; ii++)
            {
                o_groupData.iv_portGrouped[ii] = true;
            }

            FAPI_INF("grouping_group8PortsPerGroup: Successfully grouped 8 "
                     "MC ports.");
        }
    }

    FAPI_DBG("Exiting");
    return;
}

///
/// @brief Attempts to group 6 ports per group
///
/// If they can be grouped, fills in the following fields in o_groupData:
///  - iv_data[<group>][PORT_SIZE]
///  - iv_data[<group>][PORTS_IN_GROUP]
///  - iv_data[<group>][GROUP_SIZE]
///  - iv_data[<group>][MEMBER_IDX(<members>)]
///  - iv_portGrouped[<group>]
///  - iv_numGroups
///
///  @param[in]  i_memInfo   Reference to EffGroupingMemInfo structure
///  @param[out] o_groupData Reference to output data
///
void grouping_group6PortsPerGroup(const EffGroupingMemInfo& i_memInfo,
                                  EffGroupingData& o_groupData)
{
    FAPI_DBG("Entering");

    FAPI_INF("grouping_group6PortsPerGroup: Attempting to group 6 MC ports");
    uint8_t& g = o_groupData.iv_numGroups;

    // The following is all the allowed ways of grouping 6 MC ports per group.
    // Earlier array entries are higher priority.
    const uint8_t NUM_WAYS_6MCPORTS_PER_GROUP = 4;
    const uint8_t PORTS_PER_GROUP = 6;
    const uint8_t CFG_6MCPORT[NUM_WAYS_6MCPORTS_PER_GROUP][PORTS_PER_GROUP] =
    {
        { MCPORTID_0, MCPORTID_1, MCPORTID_2, MCPORTID_3, MCPORTID_4, MCPORTID_5 },
        { MCPORTID_0, MCPORTID_1, MCPORTID_2, MCPORTID_3, MCPORTID_6, MCPORTID_7 },
        { MCPORTID_0, MCPORTID_1, MCPORTID_4, MCPORTID_5, MCPORTID_6, MCPORTID_7 },
        { MCPORTID_2, MCPORTID_3, MCPORTID_4, MCPORTID_5, MCPORTID_6, MCPORTID_7 },
    };

    // Figure out which group of 6 can potentially be grouped
    for (uint8_t ii = 0; ii < NUM_WAYS_6MCPORTS_PER_GROUP; ii++)
    {
        // Skip if first MC port entry is already grouped or has no memory
        if ( (o_groupData.iv_portGrouped[CFG_6MCPORT[ii][0]]) ||
             (i_memInfo.iv_portSize[CFG_6MCPORT[ii][0]] == 0) )

        {
            FAPI_DBG("CFG_6MCPORT[%d][0] is already grouped or has no memory:", ii);
            FAPI_DBG("    o_groupData.iv_portGrouped[CFG_6MCPORT[%d][0]] = %d",
                     ii, o_groupData.iv_portGrouped[CFG_6MCPORT[ii][0]]);
            FAPI_DBG("    i_memInfo.iv_portSize[CFG_6MCPORT[%d][0]] = %d",
                     ii, i_memInfo.iv_portSize[CFG_6MCPORT[ii][0]]);
            continue;
        }

        // Check the remaining MC port ids (horizontally) in this
        // CFG_6MCPORT[ii]
        // If they are not yet grouped and have the same amount of memory
        // as the first entry, then they can be grouped together of 6.
        bool potential_group = true;

        for (uint8_t jj = 1; jj < PORTS_PER_GROUP; jj++)
        {
            FAPI_DBG("Checking CFG_6MCPORT[%d][%d]: MCPORTID %d:",
                     ii, jj, CFG_6MCPORT[ii][jj]);

            if ( (o_groupData.iv_portGrouped[CFG_6MCPORT[ii][jj]]) ||
                 (i_memInfo.iv_portSize[CFG_6MCPORT[ii][0]] !=
                  i_memInfo.iv_portSize[CFG_6MCPORT[ii][jj]]) )
            {
                // This port is already grouped or does not have the same
                // size as first entry CFG_6MCPORT[ii][0]
                FAPI_DBG("   Unable to group way by 6: ");
                FAPI_DBG("      o_groupData.iv_portGrouped[CFG_6MCPORT[%d][%d]] = %d",
                         ii, jj, o_groupData.iv_portGrouped[CFG_6MCPORT[ii][jj]]);
                FAPI_DBG("      i_memInfo.iv_portSize[CFG_6MCPORT[%d][0]] = %d GB",
                         ii, i_memInfo.iv_portSize[CFG_6MCPORT[ii][0]]);
                FAPI_DBG("      i_memInfo.iv_portSize[CFG_6MCPORT[%d][%d]] = %d GB",
                         ii, jj, i_memInfo.iv_portSize[CFG_6MCPORT[ii][jj]]);
                potential_group = false;
                break;
            }
        }

        // Group of 6 is possible
        if (potential_group &&
            ((PORTS_PER_GROUP * i_memInfo.iv_portSize[CFG_6MCPORT[ii][0]]) <= i_memInfo.iv_maxGroupMemSize))
        {
            o_groupData.iv_data[g][PORT_SIZE] =
                i_memInfo.iv_portSize[CFG_6MCPORT[ii][0]];
            o_groupData.iv_data[g][PORTS_IN_GROUP] = PORTS_PER_GROUP;
            o_groupData.iv_data[g][GROUP_SIZE] =
                PORTS_PER_GROUP * i_memInfo.iv_portSize[CFG_6MCPORT[ii][0]];

            // Record which MC ports were grouped
            for (uint8_t jj = 0; jj < PORTS_PER_GROUP; jj++)
            {
                o_groupData.iv_data[g][MEMBER_IDX(jj)] = CFG_6MCPORT[ii][jj];
                o_groupData.iv_portGrouped[CFG_6MCPORT[ii][jj]] = true;
            }

            g++;

            FAPI_INF("grouping_group6PortsPerGroup: Successfuly group 6 MC "
                     "ports.  CFG_6MCPORT[%d]: %u, %u, %u, %u, %u, %u",
                     ii,
                     CFG_6MCPORT[ii][0], CFG_6MCPORT[ii][1],
                     CFG_6MCPORT[ii][2], CFG_6MCPORT[ii][3],
                     CFG_6MCPORT[ii][4], CFG_6MCPORT[ii][5]);
        }
    }

    FAPI_DBG("Exiting");
    return;
}

///
/// @brief Attempts to group 4 ports per group
///
/// If they can be grouped, fills in the following fields in o_groupData:
///  - iv_data[<group>][PORT_SIZE]
///  - iv_data[<group>][PORTS_IN_GROUP]
///  - iv_data[<group>][GROUP_SIZE]
///  - iv_data[<group>][MEMBER_IDX(<members>)]
///  - iv_portGrouped[<group>]
///  - iv_numGroups
///
///  @param[in]  i_memInfo   Reference to EffGroupingMemInfo structure
///  @param[out] o_groupData Reference to output data
///
void grouping_group4PortsPerGroup(const EffGroupingMemInfo& i_memInfo,
                                  EffGroupingData& o_groupData)
{
    FAPI_DBG("Entering");

    // The following is all the allowed ways of grouping 4 MC ports per group.
    // Earlier array entries are higher priority.
    // First try to group 2 sets of 4 (0/1, 2/3 or 4/5)
    // If no success then try to group 1 set of 4
    FAPI_INF("grouping_group4PortsPerGroup: Attempting to group 4 MC ports");
    uint8_t& g = o_groupData.iv_numGroups;

    const uint8_t NUM_WAYS_4MCPORTS_PER_GROUP = 6;
    const uint8_t PORTS_PER_GROUP = 4;
    const uint8_t CFG_4MCPORT[NUM_WAYS_4MCPORTS_PER_GROUP][PORTS_PER_GROUP] =
    {
        { MCPORTID_0, MCPORTID_1, MCPORTID_4, MCPORTID_5 },
        { MCPORTID_2, MCPORTID_3, MCPORTID_6, MCPORTID_7 },
        { MCPORTID_0, MCPORTID_1, MCPORTID_6, MCPORTID_7 },
        { MCPORTID_2, MCPORTID_3, MCPORTID_4, MCPORTID_5 },
        { MCPORTID_0, MCPORTID_1, MCPORTID_2, MCPORTID_3 },
        { MCPORTID_4, MCPORTID_5, MCPORTID_6, MCPORTID_7 }
    };

    // Array recording which groups of 4 can potentially be grouped
    uint8_t config4_gp[NUM_WAYS_4MCPORTS_PER_GROUP];
    memset(config4_gp, 0, sizeof(config4_gp));

    // Figure out which groups of 4 can potentially be grouped
    for (uint8_t ii = 0; ii < NUM_WAYS_4MCPORTS_PER_GROUP; ii++)
    {
        // Skip if first MC port entry is already grouped or has no memory
        if ( (o_groupData.iv_portGrouped[CFG_4MCPORT[ii][0]]) ||
             (i_memInfo.iv_portSize[CFG_4MCPORT[ii][0]] == 0) )

        {
            FAPI_DBG("CFG_4MCPORT[%d][0] is already grouped or has no memory:", ii);
            FAPI_DBG("    o_groupData.iv_portGrouped[CFG_4MCPORT[%d][0]] = %d",
                     ii, o_groupData.iv_portGrouped[CFG_4MCPORT[ii][0]]);
            FAPI_DBG("    i_memInfo.iv_portSize[CFG_4MCPORT[%d][0]] = %d",
                     ii, i_memInfo.iv_portSize[CFG_4MCPORT[ii][0]]);
            continue;
        }

        // Check the remaining MC port ids (horizontally) in this
        // CFG_4MCPORT[ii]
        // If they are not yet grouped and have the same amount of memory
        // as the first entry, then they can be grouped together of 4.
        bool potential_group = true;

        for (uint8_t jj = 1; jj < PORTS_PER_GROUP; jj++)
        {
            FAPI_DBG("Checking CFG_4MCPORT[%d][%d]: MCPORTID %d:",
                     ii, jj, CFG_4MCPORT[ii][jj]);

            if ( (o_groupData.iv_portGrouped[CFG_4MCPORT[ii][jj]]) ||
                 (i_memInfo.iv_portSize[CFG_4MCPORT[ii][0]] !=
                  i_memInfo.iv_portSize[CFG_4MCPORT[ii][jj]]) )
            {
                // This port is already grouped or does not have the same
                // size as first entry CFG_4MCPORT[ii][0]
                FAPI_DBG("   Unable to group way by 4: ");
                FAPI_DBG("      o_groupData.iv_portGrouped[CFG_4MCPORT[%d][%d]] = %d",
                         ii, jj, o_groupData.iv_portGrouped[CFG_4MCPORT[ii][jj]]);
                FAPI_DBG("      i_memInfo.iv_portSize[CFG_4MCPORT[%d][0]] = %d GB",
                         ii, i_memInfo.iv_portSize[CFG_4MCPORT[ii][0]]);
                FAPI_DBG("      i_memInfo.iv_portSize[CFG_4MCPORT[%d][%d]] = %d GB",
                         ii, jj, i_memInfo.iv_portSize[CFG_4MCPORT[ii][jj]]);

                potential_group = false;
                break;
            }
        }

        // Group of 4 is possible
        if (potential_group &&
            ((PORTS_PER_GROUP * i_memInfo.iv_portSize[CFG_4MCPORT[ii][0]]) <= i_memInfo.iv_maxGroupMemSize))
        {
            FAPI_INF("    Potential group MC ports: MCPORTID %u, MCPORTID %u, MCPORTID %u, MCPORTID %u",
                     CFG_4MCPORT[ii][0], CFG_4MCPORT[ii][1],
                     CFG_4MCPORT[ii][2], CFG_4MCPORT[ii][3]);
            config4_gp[ii] = 1;
        }
    }

    // Figure out which groups of 4 to actually group
    uint8_t gp1 = 0xff;
    uint8_t gp2 = 0xff;

    // Check if 2 groups of 4 are possible (0/1, 2/3 or 4/5)
    for (uint8_t ii = 0; ii < NUM_WAYS_4MCPORTS_PER_GROUP; ii += 2)
    {
        if (config4_gp[ii] && config4_gp[ii + 1])
        {
            gp1 = ii;
            gp2 = ii + 1;
            break;
        }
    }

    if (gp1 == 0xff)
    {
        // 2 groups of 4 are not possible, look for 1 group of 4
        for (uint8_t ii = 0; ii < NUM_WAYS_4MCPORTS_PER_GROUP; ii++)
        {
            if (config4_gp[ii])
            {
                gp1 = ii;
                break;
            }
        }
    }

    // If gp1/gp2 marked as succesfful, update o_groupData
    if (gp1 != 0xff)
    {
        o_groupData.iv_data[g][PORT_SIZE] =
            i_memInfo.iv_portSize[CFG_4MCPORT[gp1][0]];
        o_groupData.iv_data[g][PORTS_IN_GROUP] = PORTS_PER_GROUP;
        o_groupData.iv_data[g][GROUP_SIZE] =
            PORTS_PER_GROUP * i_memInfo.iv_portSize[CFG_4MCPORT[gp1][0]];
        o_groupData.iv_data[g][MEMBER_IDX(0)] = CFG_4MCPORT[gp1][0];
        o_groupData.iv_data[g][MEMBER_IDX(1)] = CFG_4MCPORT[gp1][2];
        o_groupData.iv_data[g][MEMBER_IDX(2)] = CFG_4MCPORT[gp1][1];
        o_groupData.iv_data[g][MEMBER_IDX(3)] = CFG_4MCPORT[gp1][3];
        g++;

        // Record which MC ports were grouped
        for (uint8_t ii = 0; ii < PORTS_PER_GROUP; ii++)
        {
            o_groupData.iv_portGrouped[CFG_4MCPORT[gp1][ii]] = true;
        }

        FAPI_INF("grouping_group4PortsPerGroup: Successfully grouped 4 "
                 "MC ports. CFG_4MCPORT[%d] %u, %u, %u, %u", gp1,
                 CFG_4MCPORT[gp1][0], CFG_4MCPORT[gp1][1],
                 CFG_4MCPORT[gp1][2], CFG_4MCPORT[gp1][3]);

    }

    if (gp2 != 0xff)
    {
        o_groupData.iv_data[g][PORT_SIZE] =
            i_memInfo.iv_portSize[CFG_4MCPORT[gp2][0]];
        o_groupData.iv_data[g][PORTS_IN_GROUP] = PORTS_PER_GROUP;
        o_groupData.iv_data[g][GROUP_SIZE] =
            PORTS_PER_GROUP * i_memInfo.iv_portSize[CFG_4MCPORT[gp2][0]];
        o_groupData.iv_data[g][MEMBER_IDX(0)] = CFG_4MCPORT[gp2][0];
        o_groupData.iv_data[g][MEMBER_IDX(1)] = CFG_4MCPORT[gp2][2];
        o_groupData.iv_data[g][MEMBER_IDX(2)] = CFG_4MCPORT[gp2][1];
        o_groupData.iv_data[g][MEMBER_IDX(3)] = CFG_4MCPORT[gp2][3];
        g++;

        // Record which MC ports were grouped
        for (uint8_t ii = 0; ii < PORTS_PER_GROUP; ii++)
        {
            o_groupData.iv_portGrouped[CFG_4MCPORT[gp2][ii]] = true;
        }

        FAPI_INF("grouping_group4PortsPerGroup: Successfully grouped 4 "
                 "MC ports. CFG_4MCPORT[%d] %u, %u, %u, %u", gp2,
                 CFG_4MCPORT[gp2][0], CFG_4MCPORT[gp2][1],
                 CFG_4MCPORT[gp2][2], CFG_4MCPORT[gp2][3]);
    }

    FAPI_DBG("Exiting");
    return;
}

///
/// @brief Attempts to group 3 ports per group
///
/// If they can be grouped, fills in the following fields in o_groupData:
///  - iv_data[<group>][PORT_SIZE]
///  - iv_data[<group>][PORTS_IN_GROUP]
///  - iv_data[<group>][GROUP_SIZE]
///  - iv_data[<group>][MEMBER_IDX(<members>)]
///  - iv_portGrouped[<group>]
///  - iv_numGroups
///
///  @param[in]  i_memInfo   Reference to EffGroupingMemInfo structure
///  @param[out] o_groupData Reference to output data
///
void grouping_group3PortsPerGroup(const EffGroupingMemInfo& i_memInfo,
                                  EffGroupingData& o_groupData)
{
    FAPI_DBG("Entering");

    // The following is all the allowed ways of grouping 3 MC ports per group.
    // Earlier array entries are higher priority.
    FAPI_INF("grouping_group3PortsPerGroup: Attempting to group 3 MC ports");
    uint8_t& g = o_groupData.iv_numGroups;

    const uint8_t NUM_WAYS_3MCPORTS_PER_GROUP = 24;
    const uint8_t PORTS_PER_GROUP = 3;
    const uint8_t CFG_3MCPORT[NUM_WAYS_3MCPORTS_PER_GROUP][PORTS_PER_GROUP] =
    {
        { MCPORTID_0, MCPORTID_1, MCPORTID_2 },
        { MCPORTID_0, MCPORTID_1, MCPORTID_3 },
        { MCPORTID_0, MCPORTID_1, MCPORTID_4 },
        { MCPORTID_0, MCPORTID_1, MCPORTID_5 },
        { MCPORTID_0, MCPORTID_1, MCPORTID_6 },
        { MCPORTID_0, MCPORTID_1, MCPORTID_7 },

        { MCPORTID_2, MCPORTID_3, MCPORTID_0 },
        { MCPORTID_2, MCPORTID_3, MCPORTID_1 },
        { MCPORTID_2, MCPORTID_3, MCPORTID_4 },
        { MCPORTID_2, MCPORTID_3, MCPORTID_5 },
        { MCPORTID_2, MCPORTID_3, MCPORTID_6 },
        { MCPORTID_2, MCPORTID_3, MCPORTID_7 },

        { MCPORTID_4, MCPORTID_5, MCPORTID_0 },
        { MCPORTID_4, MCPORTID_5, MCPORTID_1 },
        { MCPORTID_4, MCPORTID_5, MCPORTID_2 },
        { MCPORTID_4, MCPORTID_5, MCPORTID_3 },
        { MCPORTID_4, MCPORTID_5, MCPORTID_6 },
        { MCPORTID_4, MCPORTID_5, MCPORTID_7 },

        { MCPORTID_6, MCPORTID_7, MCPORTID_0 },
        { MCPORTID_6, MCPORTID_7, MCPORTID_1 },
        { MCPORTID_6, MCPORTID_7, MCPORTID_2 },
        { MCPORTID_6, MCPORTID_7, MCPORTID_3 },
        { MCPORTID_6, MCPORTID_7, MCPORTID_4 },
        { MCPORTID_6, MCPORTID_7, MCPORTID_5 }
    };

    // Figure out which group of 3 can potentially be grouped
    for (uint8_t ii = 0; ii < NUM_WAYS_3MCPORTS_PER_GROUP; ii++)
    {
        // Skip if first MC port entry is already grouped or has no memory
        if ( (o_groupData.iv_portGrouped[CFG_3MCPORT[ii][0]]) ||
             (i_memInfo.iv_portSize[CFG_3MCPORT[ii][0]] == 0) )

        {
            FAPI_DBG("CFG_3MCPORT[%d][0] is already grouped or has no memory:", ii);
            FAPI_DBG("    o_groupData.iv_portGrouped[CFG_3MCPORT[%d][0]] = %d",
                     ii, o_groupData.iv_portGrouped[CFG_3MCPORT[ii][0]]);
            FAPI_DBG("    i_memInfo.iv_portSize[CFG_3MCPORT[%d][0]] = %d",
                     ii, i_memInfo.iv_portSize[CFG_3MCPORT[ii][0]]);
            continue;
        }

        // Rules for group of 3:
        // 1. All 3 ports must have same amount of memory
        // 2. Cross-MCS ports can be grouped if and only if:
        //      - it's an even port (port0) in the MCS
        //      - it's an odd port (port1) in the MCS and the even port is empty.
        //    Ex: MCPORTID_0, MCPORTID_1, MCPORTID_3: MCPORTID_2 must be empty
        //        MCPORTID_2, MCPORTID_3, MCPORTID_5: MCPORTID_4 must be empty
        //        MCPORTID_2, MCPORTID_3, MCPORTID_4: OK to group

        // Variable to indicates reason 3 ports can't be group
        //    0 = OK to group
        //    1 = One of the ports has unequal amount of memory
        //    2 = 3rd entry port is odd and its even port has memory.
        //    3 = group extent exceeds maximum size
        uint8_t l_canNotGroup = 0;
        uint8_t jj = 0;

        for (jj = 1; jj < PORTS_PER_GROUP; jj++)
        {
            FAPI_DBG("Checking CFG_3MCPORT[%d][%d]: MCPORTID %d:",
                     ii, jj, CFG_3MCPORT[ii][jj]);

            // Skip if this port is already grouped or has different
            // amount of memory
            if ( (o_groupData.iv_portGrouped[CFG_3MCPORT[ii][jj]]) ||
                 (i_memInfo.iv_portSize[CFG_3MCPORT[ii][0]] !=
                  i_memInfo.iv_portSize[CFG_3MCPORT[ii][jj]]) )
            {
                l_canNotGroup = 1;
                break;
            }

            // If this is the 3rd entry, the port belong to another MCS.
            if ( jj == (PORTS_PER_GROUP - 1) ) // 3rd entry
            {
                // If this is an odd port of the MCS, its even port
                // must be empty
                if ( (CFG_3MCPORT[ii][jj] % 2) &&
                     (i_memInfo.iv_portSize[CFG_3MCPORT[ii][jj] - 1] != 0) )
                {
                    l_canNotGroup = 2;
                    break;
                }
            }

            if ((PORTS_PER_GROUP * i_memInfo.iv_portSize[CFG_3MCPORT[ii][0]]) >
                i_memInfo.iv_maxGroupMemSize)
            {
                l_canNotGroup = 3;
                break;
            }
        }

        if (l_canNotGroup != 0) // Can not group 3 ports
        {
            FAPI_DBG("   Unable to group way by 3: Can not group reason: %d",
                     l_canNotGroup);
            FAPI_DBG("      o_groupData.iv_portGrouped[CFG_3MCPORT[%d][%d]] = %d",
                     ii, jj, o_groupData.iv_portGrouped[CFG_3MCPORT[ii][jj]]);
            FAPI_DBG("      i_memInfo.iv_portSize[CFG_3MCPORT[%d][0]] = %d GB",
                     ii, i_memInfo.iv_portSize[CFG_3MCPORT[ii][0]]);
            FAPI_DBG("      i_memInfo.iv_portSize[CFG_3MCPORT[%d][%d]] = %d GB",
                     ii, jj, i_memInfo.iv_portSize[CFG_3MCPORT[ii][jj]]);
        }
        else // Group of 3 is possible
        {
            o_groupData.iv_data[g][PORT_SIZE] =
                i_memInfo.iv_portSize[CFG_3MCPORT[ii][0]];
            o_groupData.iv_data[g][PORTS_IN_GROUP] = PORTS_PER_GROUP;
            o_groupData.iv_data[g][GROUP_SIZE] =
                PORTS_PER_GROUP * i_memInfo.iv_portSize[CFG_3MCPORT[ii][0]];
            o_groupData.iv_data[g][MEMBER_IDX(0)] = CFG_3MCPORT[ii][0];
            o_groupData.iv_data[g][MEMBER_IDX(1)] = CFG_3MCPORT[ii][1];
            o_groupData.iv_data[g][MEMBER_IDX(2)] = CFG_3MCPORT[ii][2];
            g++;

            // Record which MC ports were grouped
            for (uint8_t jj = 0; jj < PORTS_PER_GROUP; jj++)
            {
                o_groupData.iv_portGrouped[CFG_3MCPORT[ii][jj]] = true;
            }

            FAPI_INF("grouping_group3PortsPerGroup: Successfully grouped 3 "
                     "MC ports. CFG_3MCPORT[%d] %u, %u, %u, %u", ii,
                     CFG_3MCPORT[ii][0], CFG_3MCPORT[ii][1],
                     CFG_3MCPORT[ii][2]);
        }
    }

    FAPI_DBG("Exiting");
    return;
}

///
/// @brief Attempts to group 2 ports on same MCS
///
/// Rules: Both ports must not be grouped yet
///        Both ports must have the same amound of memory.
///        Both ports must be on the same MCS
///
/// If they can be grouped, fills in the following fields in o_groupData:
///  - iv_data[<group>][PORT_SIZE]
///  - iv_data[<group>][PORTS_IN_GROUP]
///  - iv_data[<group>][GROUP_SIZE]
///  - iv_data[<group>][MEMBER_IDX(<members>)]
///  - iv_portGrouped[<group>]
///  - iv_numGroups
///
///  @param[in]  i_memInfo   Reference to EffGroupingMemInfo structure
///  @param[out] o_groupData Reference to output data
///
void grouping_2ports_same_MCS(const EffGroupingMemInfo& i_memInfo,
                              EffGroupingData& o_groupData)
{
    FAPI_DBG("Entering");
    FAPI_INF("grouping_2ports_same_MCS: Attempting to group 2 ports on same MCS");
    uint8_t& g = o_groupData.iv_numGroups;
    const uint8_t PORTS_PER_GROUP = 2;

    for (uint8_t pos = 0; pos < NUM_MC_PORTS_PER_PROC; pos += 2)
    {
        FAPI_DBG("Trying ports %u & %u", pos, pos + 1);

        // Check 1st port of MCS
        if ( (o_groupData.iv_portGrouped[pos]) ||
             (i_memInfo.iv_portSize[pos] == 0) )
        {
            FAPI_DBG("Port %u already grouped or empty, skip", pos);
            continue;
        }

        // Check 2nd port
        if ( (o_groupData.iv_portGrouped[pos + 1]) ||
             (i_memInfo.iv_portSize[pos + 1] != i_memInfo.iv_portSize[pos]) )
        {
            FAPI_DBG("Port %u already grouped or has different memory size, skip",
                     pos + 1);
            continue;
        }

        if ((PORTS_PER_GROUP * i_memInfo.iv_portSize[pos]) >
            i_memInfo.iv_maxGroupMemSize)
        {
            FAPI_DBG("Ports %u & %u can't be grouped because group size is too large, skip",
                     pos, pos + 1);
            continue;
        }

        // Successfully find 2 ports on same MCS to group
        o_groupData.iv_data[g][PORT_SIZE] = i_memInfo.iv_portSize[pos];
        o_groupData.iv_data[g][PORTS_IN_GROUP] = PORTS_PER_GROUP;
        o_groupData.iv_data[g][GROUP_SIZE] =
            PORTS_PER_GROUP * i_memInfo.iv_portSize[pos];
        o_groupData.iv_data[g][MEMBER_IDX(0)] = pos;
        o_groupData.iv_data[g][MEMBER_IDX(1)] = pos + 1;
        g++;

        // Record which MC ports were grouped
        o_groupData.iv_portGrouped[pos] = true;
        o_groupData.iv_portGrouped[pos + 1] = true;

        FAPI_INF("grouping_2ports_same_MCS: Successfully grouped "
                 "MC ports: %u, %u", pos, pos + 1);
    }

    FAPI_DBG("Exiting");
    return;
}

///
/// @brief Attempts to group 2 groups of 2 on cross-MCS
///
/// Rules: Both ports must not be grouped yet
///        Both ports must have the same amound of memory.
///        The other 2 ports of the same cross-MCS are also grouped by 2.
///
/// If they can be grouped, fills in the following fields in o_groupData:
///  - iv_data[<group>][PORT_SIZE]
///  - iv_data[<group>][PORTS_IN_GROUP]
///  - iv_data[<group>][GROUP_SIZE]
///  - iv_data[<group>][MEMBER_IDX(<members>)]
///  - iv_portGrouped[<group>]
///  - iv_numGroups
///
///  @param[in]  i_memInfo   Reference to EffGroupingMemInfo structure
///  @param[out] o_groupData Reference to output data
///
void grouping_2groupsOf2_cross_MCS(const EffGroupingMemInfo& i_memInfo,
                                   EffGroupingData& o_groupData)
{
    FAPI_DBG("Entering");
    FAPI_INF("grouping_2groupsOf2_cross_MCS: Attempting to group 2 groups of 2 on cross-MCS");
    uint8_t& g = o_groupData.iv_numGroups;
    const uint8_t PORTS_PER_GROUP = 2;
    uint8_t l_port = 0;

    // Try 2 groups of 2 from 2 cross-MCS/MI. Possible combinations:
    // MCS and MCA --> Nimbus
    // MI and DMI --> Cumulus
    //    MCS0 and MCS1 --> MCA0/MCA2 & MCA1/MCA3 or MCA0/MCA3 & MCA1/MCA2
    //    MCS0 and MCS2 --> MCA0/MCA4 & MCA1/MCA5 or MCA0/MCA5 & MCA1/MCA4
    //    MCS0 and MCS3 --> MCA0/MCA6 & MCA1/MCA7 or MCA0/MCA7 & MCA1/MCA6
    //    MCS1 and MCS2 --> MCA2/MCA4 & MCA3/MCA5 or MCA2/MCA5 & MCA3/MCA4
    //    MCS1 and MCS3 --> MCA2/MCA6 & MCA3/MCA7 or MCA2/MCA7 & MCA3/MCA6
    //    MCS2 and MCS3 --> MCA4/MCA6 & MCA5/MCA7 or MCA4/MCA7 & MCA5/MCA6

    // Get the 1st MCS candidate
    for (uint8_t mcs1 = 0; mcs1 < (NUM_MCS_PER_PROC - 1); mcs1++)
    {
        FAPI_DBG("Checking MCS %u", mcs1);

        // Skip if any port of this MCS is already grouped or empty
        l_port = mcs1 * 2; // First port number of this MCS

        if ( (o_groupData.iv_portGrouped[l_port]) ||
             (i_memInfo.iv_portSize[l_port] == 0) ||
             (o_groupData.iv_portGrouped[l_port + 1]) ||
             (i_memInfo.iv_portSize[l_port + 1] == 0) )
        {
            FAPI_DBG("Skip 1st MCS %u, one of its ports already grouped or empty", mcs1);
            continue;
        }

        // only need to check size of 1st MCS (since the 2nd MCS would be the
        // same size)
        if ((PORTS_PER_GROUP * i_memInfo.iv_portSize[l_port]) >
            i_memInfo.iv_maxGroupMemSize)
        {
            FAPI_DBG("Skip 1st MCS %u, as group size formed would be too large",
                     mcs1);
            continue;
        }

        // Found first potential MCS, look for the 2nd MCS
        for (uint8_t mcs2 = mcs1 + 1; mcs2 < NUM_MCS_PER_PROC; mcs2++)
        {
            l_port = mcs2 * 2; // First port number of 2nd MCS

            if ( (o_groupData.iv_portGrouped[l_port]) ||
                 (i_memInfo.iv_portSize[l_port] == 0) ||
                 (o_groupData.iv_portGrouped[l_port + 1]) ||
                 (i_memInfo.iv_portSize[l_port + 1] == 0) )
            {
                FAPI_DBG("Skip 2nd MCS %u, one of its ports already grouped or empty", mcs2);
                continue;
            }

            // Found 2 potential cross-MCS to group 2 groups of 2
            uint8_t mcs1pos0 = mcs1 * 2;
            uint8_t mcs2pos0 = mcs2 * 2;
            bool l_groupSuccess = false;
            uint8_t l_twoGroupOf2[2][PORTS_PER_GROUP] = {0};

            if ( (i_memInfo.iv_portSize[mcs1pos0] == i_memInfo.iv_portSize[mcs2pos0]) &&
                 (i_memInfo.iv_portSize[mcs1pos0 + 1] == i_memInfo.iv_portSize[mcs2pos0 + 1]) )
            {
                l_groupSuccess = true;
                l_twoGroupOf2[0][0] = mcs1pos0;
                l_twoGroupOf2[0][1] = mcs2pos0;
                l_twoGroupOf2[1][0] = mcs1pos0 + 1;
                l_twoGroupOf2[1][1] = mcs2pos0 + 1;
            }
            else if ( (i_memInfo.iv_portSize[mcs1pos0] == i_memInfo.iv_portSize[mcs2pos0 + 1]) &&
                      (i_memInfo.iv_portSize[mcs1pos0 + 1] == i_memInfo.iv_portSize[mcs2pos0]) )
            {
                l_groupSuccess = true;
                l_twoGroupOf2[0][0] = mcs1pos0;
                l_twoGroupOf2[0][1] = mcs2pos0 + 1;
                l_twoGroupOf2[1][0] = mcs1pos0 + 1;
                l_twoGroupOf2[1][1] = mcs2pos0;
            }

            if (l_groupSuccess == false)
            {
                FAPI_DBG("Skip 2nd MCS %u, memory size are not equal for 2 groups of 2", mcs2);
                continue;
            }

            // Successfully group 2 groups of 2 from cross-MCS

            // First group:
            o_groupData.iv_data[g][PORT_SIZE] =
                i_memInfo.iv_portSize[l_twoGroupOf2[0][0]];
            o_groupData.iv_data[g][PORTS_IN_GROUP] = PORTS_PER_GROUP;
            o_groupData.iv_data[g][GROUP_SIZE] =
                PORTS_PER_GROUP * i_memInfo.iv_portSize[l_twoGroupOf2[0][0]];
            o_groupData.iv_data[g][MEMBER_IDX(0)] = l_twoGroupOf2[0][0];
            o_groupData.iv_data[g][MEMBER_IDX(1)] = l_twoGroupOf2[0][1];
            g++;
            // Record which MC ports were grouped
            o_groupData.iv_portGrouped[l_twoGroupOf2[0][0]] = true;
            o_groupData.iv_portGrouped[l_twoGroupOf2[0][1]] = true;

            // Second group:
            o_groupData.iv_data[g][PORT_SIZE] = i_memInfo.iv_portSize[l_twoGroupOf2[1][0]];
            o_groupData.iv_data[g][PORTS_IN_GROUP] = PORTS_PER_GROUP;
            o_groupData.iv_data[g][GROUP_SIZE] =
                PORTS_PER_GROUP * i_memInfo.iv_portSize[l_twoGroupOf2[1][0]];
            o_groupData.iv_data[g][MEMBER_IDX(0)] = l_twoGroupOf2[1][0];
            o_groupData.iv_data[g][MEMBER_IDX(1)] = l_twoGroupOf2[1][1];
            g++;
            // Record which MC ports were grouped
            o_groupData.iv_portGrouped[l_twoGroupOf2[1][0]] = true;
            o_groupData.iv_portGrouped[l_twoGroupOf2[1][1]] = true;

            FAPI_INF("grouping_2groupsOf2_cross_MCS: Successfully grouped "
                     "2 groups of 2 from MCS %u and %u", mcs1, mcs2);
            FAPI_INF("   Group: Ports %u and %u; Group: ports %u and %u",
                     l_twoGroupOf2[0][0], l_twoGroupOf2[0][1],
                     l_twoGroupOf2[1][0], l_twoGroupOf2[1][1]);
            // Break out of mcs2 loop
            break;
        }
    }

    FAPI_DBG("Exiting");
    return;
}

///
/// @brief Attempts to group 2 ports per group
///
/// If they can be grouped, fills in the following fields in o_groupData:
///  - iv_data[<group>][PORT_SIZE]
///  - iv_data[<group>][PORTS_IN_GROUP]
///  - iv_data[<group>][GROUP_SIZE]
///  - iv_data[<group>][MEMBER_IDX(<members>)]
///  - iv_portGrouped[<group>]
///  - iv_numGroups
///
///  @param[in]  i_memInfo   Reference to EffGroupingMemInfo structure
///  @param[out] o_groupData Reference to output data
///
void grouping_group2PortsPerGroup(const EffGroupingMemInfo& i_memInfo,
                                  EffGroupingData& o_groupData)
{
    FAPI_DBG("Entering");
    FAPI_INF("grouping_group2PortsPerGroup: Attempting to group 2 MC ports");
    uint8_t& g = o_groupData.iv_numGroups;
    const uint8_t PORTS_PER_GROUP = 2;
    uint8_t l_otherPort = 0;

    // 1. Try to group 2 ports that are in the same MCS (highest priority)
    grouping_2ports_same_MCS(i_memInfo, o_groupData);

    // 2. Try two groups of 2 on cross-MCS
    grouping_2groupsOf2_cross_MCS(i_memInfo, o_groupData);

    // 3. Attempt group of 2 for the remaining un-grouped ports (cross-MCS)
    FAPI_INF("Attempting to group the remaining ports as group of 2");

    for (uint8_t pos = 0; pos < (NUM_MC_PORTS_PER_PROC - 1); pos++)
    {
        FAPI_DBG("Trying to group port %u with another port..", pos);

        // Skip if port is already grouped or has no memory
        if ( (o_groupData.iv_portGrouped[pos]) ||
             (i_memInfo.iv_portSize[pos] == 0) )

        {
            FAPI_DBG("Skip this port because already grouped or empty:");
            FAPI_DBG("    o_groupData.iv_portGrouped[%d] = %d", pos, o_groupData.iv_portGrouped[pos]);
            FAPI_DBG("    i_memInfo.iv_portSize[%d] = %d", pos, i_memInfo.iv_portSize[pos]);
            continue;
        }

        // Skip if group size would be too large
        if ((PORTS_PER_GROUP * i_memInfo.iv_portSize[pos]) >
            i_memInfo.iv_maxGroupMemSize)
        {
            FAPI_DBG("Skip this port %u, as group size formed would be too large",
                     pos);
            continue;
        }

        // Rules for group of 2 for remaining ports on cross-MCS
        // 1. Both ports must not be grouped yet and have the same amount of memory.
        // 2. For both ports, the other port in their MCS must be empty
        //    Ex: MCPORTID_1, MCPORTID_2: MCPORTID_0 and MCPORTID_3 must be empty
        //        MCPORTID_1, MCPORTID_3: MCPORTID_0 and MCPORTID_2 must be empty
        //        MCPORTID_0, MCPORTID_2: MCPORTID_1 and MCPORTID_3 must be empty

        // Skip if the other port in this MCS is not empty
        if (pos % 2)
        {
            l_otherPort = pos - 1;
        }
        else
        {
            l_otherPort = pos + 1;
        }

        if (i_memInfo.iv_portSize[l_otherPort] != 0)
        {
            FAPI_DBG("Skip this port because the other port (%u) in its MCS is not empty",
                     l_otherPort);
            continue;
        }

        // Check to see if any remaining ungrouped port has the same amount of memory
        for (uint8_t ii = pos + 1; ii < NUM_MC_PORTS_PER_PROC; ii++)
        {
            FAPI_DBG("Checking if base port %u can be grouped with port %u", pos, ii);

            // Can not group if this port already grouped or has different memory size
            if ( (o_groupData.iv_portGrouped[ii]) ||
                 (i_memInfo.iv_portSize[ii] != i_memInfo.iv_portSize[pos]) )
            {
                FAPI_DBG("Skip port %u, it's already grouped or memsize is not equal", ii);
                continue;
            }

            // The other port in the same MCS with ii must be empty
            if (ii % 2)
            {
                l_otherPort = ii - 1;
            }
            else
            {
                l_otherPort = ii + 1;
            }

            if (i_memInfo.iv_portSize[l_otherPort] != 0)
            {
                FAPI_DBG("Cross-MCS, can't group ports %u and %u because port %u is not empty",
                         pos, ii, l_otherPort);
                continue;
            }

            // Successfully find 2 ports to group
            o_groupData.iv_data[g][PORT_SIZE] = i_memInfo.iv_portSize[pos];
            o_groupData.iv_data[g][PORTS_IN_GROUP] = PORTS_PER_GROUP;
            o_groupData.iv_data[g][GROUP_SIZE] =
                PORTS_PER_GROUP * i_memInfo.iv_portSize[pos];
            o_groupData.iv_data[g][MEMBER_IDX(0)] = pos;
            o_groupData.iv_data[g][MEMBER_IDX(1)] = ii;
            g++;

            // Record which MC ports were grouped
            o_groupData.iv_portGrouped[pos] = true;
            o_groupData.iv_portGrouped[ii] = true;

            FAPI_INF("grouping_group2PortsPerGroup: Successfully grouped 2 "
                     "MC ports: %u, %u", pos, ii);

            break; // Break out of remaining port loop
        }
    }

    FAPI_DBG("Exiting");
    return;
}

///
/// @brief Attempts to group 1 port per group
///
/// If they can be grouped, fills in the following fields in o_groupData:
///  - iv_data[<group>][PORT_SIZE]
///  - iv_data[<group>][PORTS_IN_GROUP]
///  - iv_data[<group>][GROUP_SIZE]
///  - iv_data[<group>][MEMBER_IDX(<members>)]
///  - iv_portGrouped[<group>]
///  - iv_numGroups
///
///  @param[in]  i_memInfo   Reference to EffGroupingMemInfo structure
///  @param[out] o_groupData Reference to output data
///
void grouping_group1PortsPerGroup(const EffGroupingMemInfo& i_memInfo,
                                  EffGroupingData& o_groupData)
{
    FAPI_DBG("Entering");

    // Any MC port with a non-zero size can be 'grouped'
    FAPI_INF("grouping_group1PortsPerGroup: Attempting to group 1 MC port");
    uint8_t& g = o_groupData.iv_numGroups;

    for (uint8_t pos = 0; pos < NUM_MC_PORTS_PER_PROC; pos++)
    {
        if ( (!o_groupData.iv_portGrouped[pos]) &&
             (i_memInfo.iv_portSize[pos] != 0) &&
             (i_memInfo.iv_portSize[pos] <= i_memInfo.iv_maxGroupMemSize) )
        {
            // This MCS is not already grouped and has memory
            o_groupData.iv_data[g][PORT_SIZE] = i_memInfo.iv_portSize[pos];
            o_groupData.iv_data[g][PORTS_IN_GROUP] = 1;
            o_groupData.iv_data[g][GROUP_SIZE] = i_memInfo.iv_portSize[pos];
            o_groupData.iv_data[g][MEMBER_IDX(0)] = pos;
            g++;

            // Record which MCS was grouped
            o_groupData.iv_portGrouped[pos] = true;
            FAPI_INF("grouping_group1PortsPerGroup: Successfully grouped 1 "
                     "MC port: %u", pos);

        }
    }

    FAPI_DBG("Exiting");
    return;
}

///
/// @brief Finds ungrouped ports
///
/// If any are found then their associated Memory Controller (MCA/DMI)
//  will be deconfigured
///
/// @param[in] i_mcChiplets  Reference to MC targets (MCA or DMI)
/// @param[in] i_memInfo     Reference to Memory Info
/// @param[in] i_groupData   Reference to Group data
///
/// @return FAPI2_RC_SUCCESS if success, else error code.
///
template<fapi2::TargetType T>
fapi2::ReturnCode grouping_findUngroupedPorts(
    const std::vector< fapi2::Target<T> >& i_mcTargets,
    const EffGroupingMemInfo& i_memInfo,
    const EffGroupingData& i_groupData)
{
    FAPI_DBG("Entering");

    // std_pair<MC number, target>
    std::map<uint8_t, fapi2::Target<T>> l_unGroupedPair;

    // Mark the MCs that are not grouped
    for (uint8_t ii = 0; ii < NUM_MC_PORTS_PER_PROC; ii++)
    {
        if ( (i_memInfo.iv_portSize[ii] != 0) &&
             (i_groupData.iv_portGrouped[ii] == false) )
        {
            FAPI_ERR("grouping_findUngroupedPorts: Unable to group port %u", ii);

            for (auto l_mc : i_mcTargets)
            {
                // Get the MCA position
                uint8_t l_unitPos = 0;
                FAPI_TRY(FAPI_ATTR_GET(fapi2::ATTR_CHIP_UNIT_POS, l_mc, l_unitPos),
                         "Error getting MCA ATTR_CHIP_UNIT_POS, l_rc 0x%.8X",
                         (uint64_t)fapi2::current_err);

                if (l_unitPos == ii)
                {
                    l_unGroupedPair.insert(std::pair<uint8_t, fapi2::Target<T>>
                                           (ii, l_mc));
                    break;
                }
            }
        }
    }

    // There are some ungrouped MC ports
    if (l_unGroupedPair.size() > 0)
    {
        // Assert with first failed port as FFDC
        uint8_t l_mcPortNum = l_unGroupedPair.begin()->first;
        FAPI_ASSERT(false,
                    fapi2::MSS_EFF_GROUPING_UNABLE_TO_GROUP_MC()
                    .set_MC_PORT(l_mcPortNum)
                    .set_MC_PORT_SIZE(i_memInfo.iv_portSize[l_mcPortNum])
                    .set_MAX_REGION_SIZE(i_memInfo.iv_maxGroupMemSize),
                    "grouping_findUngroupedPorts: Unable to group port %u", l_mcPortNum);
    }

fapi_try_exit:
    FAPI_DBG("Exiting");
    return fapi2::current_err;
}

///
/// @brief Determine if memory is a power of 2 in size
///
/// @param[i] i_size Memory Size
///
/// @return True if memory is a power of 2 in size; false otherwise.
///
bool isPowerOf2(uint32_t i_size)
{
    bool l_powerOf2 = false;

    if (i_size > 0)
    {
        l_powerOf2 = !(i_size & (i_size - 1));
    }

    FAPI_DBG("isPowerOf2: MemSize %d GB, l_powerOf2 0x%.8X",
             i_size, l_powerOf2);
    return l_powerOf2;
}

///
/// @brief Determine the next power of 2 value of a memory size.
///
/// @param[i] i_size   Memory size
///
/// @return Next power of 2 value
///
uint32_t nextPowerOf2(uint32_t i_size)
{
    uint32_t l_value = 1;

    while (l_value < i_size)
    {
        l_value <<= 1;
    }

    FAPI_DBG("MemSize %d GB, NextPowerOf2 %d GB", i_size, l_value);

    return l_value;
}

///
/// @brief Calculate Alt Memory
///
/// @param[io] io_groupData Group Data
///
void grouping_calcAltMemory(EffGroupingData& io_groupData)
{
    FAPI_DBG("Entering");

    for (uint8_t pos = 0; pos < io_groupData.iv_numGroups; pos++)
    {
        // Determine if the Group size a power of 2
        if ( !isPowerOf2(io_groupData.iv_data[pos][GROUP_SIZE]) )
        {

            // Note:
            // The 2nd memory hole was intended for use with 12Gb DRAM parts,
            // which we do not have to support - so it will not be used in Nimbus.

            // Memsize is not power of 2, needs ALT bar definition
            FAPI_INF("Group %u needs alt bars definition, group size %u GB",
                     pos, io_groupData.iv_data[pos][GROUP_SIZE]);

            // Alt size is the difference between real group size
            // and next power of 2 size
            io_groupData.iv_data[pos][ALT_SIZE(0)] =
                nextPowerOf2(io_groupData.iv_data[pos][GROUP_SIZE]) -
                io_groupData.iv_data[pos][GROUP_SIZE];

            // Set group size to the next power of 2 value
            io_groupData.iv_data[pos][GROUP_SIZE] =
                nextPowerOf2(io_groupData.iv_data[pos][GROUP_SIZE]);

            FAPI_INF("New Group Size is %u GB, Alt Size %u GB",
                     io_groupData.iv_data[pos][GROUP_SIZE],
                     io_groupData.iv_data[pos][ALT_SIZE(0)]);
            io_groupData.iv_data[pos][ALT_VALID(0)] = 1;
        }
    }

    FAPI_DBG("Exiting");
    return;
}

///
/// @brief Sorts groups from high to low memory size
///
/// @param[io] io_groupData Group Data
///
void grouping_sortGroups(EffGroupingData& io_groupData)
{
    FAPI_DBG("Entering");

    // Done with a simple bubble sort
    FAPI_INF("grouping_sortGroups: Sorting Groups");

    if (io_groupData.iv_numGroups)
    {
        uint32_t temp[DATA_ELEMENTS];
        bool swapped = true;

        while (swapped == true)
        {
            // Make a pass over the groups swapping adjacent sizes as needed
            swapped = false;

            for (uint8_t pos = 0; pos < io_groupData.iv_numGroups - 1; pos++)
            {
                if (io_groupData.iv_data[pos][GROUP_SIZE] <
                    io_groupData.iv_data[pos + 1][GROUP_SIZE])
                {
                    FAPI_INF("grouping_sortGroups: Swapping groups %u and %u",
                             pos, pos + 1);

                    for (uint32_t j = 0; j < DATA_ELEMENTS; j++)
                    {
                        // Save data from group pos
                        temp[j] = io_groupData.iv_data[pos][j];
                        // Copy data from pos+1 to pos
                        io_groupData.iv_data[pos][j] =
                            io_groupData.iv_data[pos + 1][j];
                        // Copy saved data from group pos to pos+1
                        io_groupData.iv_data[pos + 1][j] = temp[j];
                    }

                    swapped = true;
                }
            }
        }
    }

    FAPI_DBG("Exiting");
    return;
}

///
/// @brief Determine if mirror groups are to be created for existing groups.
///
///        Mirror group is created when these conditions are all met:
///           - Processor is Cumulus
///           - ATTR_MRW_HW_MIRRORING_ENABLE = true
///           - Number of MC ports is 2, 4, 6, or 8 and 2 ports are in the same
///             MCS/MI port pair (see MCFGP(1:4) programming in MC workbook)
///
/// @param[in]      i_target       Reference to TARGET_TYPE_PROC_CHIP target
/// @param[in]      i_sysAttrs     System attribute setting
/// @param[in/out]  io_groupData   Grouping data
///
/// @return FAPI2_RC_SUCCESS if success, else error code.
///
void setupMirrorGroup(
    const fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target,
    const EffGroupingSysAttrs& i_sysAttrs,
    EffGroupingData& io_groupData)
{
    FAPI_DBG("Entering setupMirrorGroup");

    // Get the MI chiplets
    auto l_miChiplets = i_target.getChildren<fapi2::TARGET_TYPE_MI>();

    // No mirroring if Nimbus or ATTR_MRW_HW_MIRRORING_ENABLE is off
    if ( (l_miChiplets.size() == 0) || (!i_sysAttrs.iv_hwMirrorEnabled) )
    {
        FAPI_INF("setupMirrorGroup: No mirror group - Num MI chiplets %d, "
                 "ATTR_MRW_HW_MIRRORING_ENABLE = %d",
                 l_miChiplets.size(), i_sysAttrs.iv_hwMirrorEnabled);
        goto fapi_try_exit;
    }

    // Loop thru groups to see if mirror group is possible
    for (uint8_t l_group = 0; l_group < io_groupData.iv_numGroups; l_group++)
    {
        // If group of 4, 6, or 8, mirror is allowed
        // Note: For group of 4/6/8, the ports are always in the same MC
        //       port pair per design.
        if ( (io_groupData.iv_data[l_group][PORTS_IN_GROUP] == 4) ||
             (io_groupData.iv_data[l_group][PORTS_IN_GROUP] == 6) ||
             (io_groupData.iv_data[l_group][PORTS_IN_GROUP] == 8) )
        {
            io_groupData.iv_mirrorOn[l_group] = 1;
        }

        // For group of 2, determine if both ports are in the same MCS/MI
        else if (io_groupData.iv_data[l_group][PORTS_IN_GROUP] == 2)
        {
            if ( (io_groupData.iv_data[l_group][MEMBER_IDX(0)] / 2) ==
                 (io_groupData.iv_data[l_group][MEMBER_IDX(1)] / 2) )
            {
                io_groupData.iv_mirrorOn[l_group] = 1;
            }
        }

        FAPI_INF("setupMirrorGroup: Group %d, PortsInGroup %d, Mirror = %d",
                 l_group, io_groupData.iv_data[l_group][PORTS_IN_GROUP],
                 io_groupData.iv_mirrorOn[l_group]);

    } // Group loop

fapi_try_exit:
    FAPI_DBG("Exiting setupMirrorGroup");
    return;
}


///
/// @brief Calculate base and alt-base addresses
///
/// @param[in] i_target     Reference to processor chip target
/// @param[in] i_procAttrs  Processor Chip Attributes
/// @param[in] i_cfgMirror  Map mirrored memory
/// @param[io] io_groupData Group Data
///
/// @return FAPI2_RC_SUCCESS if success, else error code.
///
fapi2::ReturnCode grouping_calcRegions(
    const fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target,
    const EffGroupingProcAttrs& i_procAttrs,
    const bool i_cfgMirror,
    EffGroupingData& io_groupData)
{
    FAPI_DBG("Entering");

    // index for region which is used for mapping current group
    // group size should never exceed the size of a particular
    // region (enforced by restricting group size at formation time)
    // if current group will stack on top of the prior group & not overflow
    // the region, stack it, else place in next region
    uint8_t l_cur_nm_region_idx = 0;
    uint8_t l_cur_m_region_idx = 0;
    uint8_t l_max_nm_region_idx = 0;
    uint8_t l_max_m_region_idx = 0;
    uint64_t l_nm_region_size_left = i_procAttrs.iv_maxGroupMemSize;
    uint64_t l_m_region_size_left = i_procAttrs.iv_maxGroupMemSize / 2;
    uint64_t l_cur_m_base_addr = 0;

    if (i_procAttrs.iv_memBaseAddr.size())
    {
        l_max_nm_region_idx = i_procAttrs.iv_memBaseAddr.size();
    }

    if (i_procAttrs.iv_mirrorBaseAddr.size())
    {
        l_max_m_region_idx = i_procAttrs.iv_mirrorBaseAddr.size();
    }

    // Calculate mirrored group sizes
    if (i_cfgMirror)
    {
        l_cur_m_base_addr = i_procAttrs.iv_mirrorBaseAddr[l_cur_m_region_idx];

        for (uint8_t pos = 0; pos < io_groupData.iv_numGroups; pos++)
        {
            if (io_groupData.iv_mirrorOn[pos])
            {
                uint8_t l_mirrorOffset = pos + MIRR_OFFSET;

                // Mirrored size is half the group size
                io_groupData.iv_data[l_mirrorOffset][GROUP_SIZE] =
                    io_groupData.iv_data[pos][GROUP_SIZE] / 2;
                io_groupData.iv_data[l_mirrorOffset][PORT_SIZE] =
                    io_groupData.iv_data[pos][PORT_SIZE];
                io_groupData.iv_data[l_mirrorOffset][PORTS_IN_GROUP] =
                    io_groupData.iv_data[pos][PORTS_IN_GROUP];

                // Copy port members fron non-mirrored to mirrored group
                for (uint8_t ii = 0; ii < io_groupData.iv_data[pos][PORTS_IN_GROUP]; ii++)
                {
                    io_groupData.iv_data[l_mirrorOffset][MEMBER_IDX(ii)] =
                        io_groupData.iv_data[pos][MEMBER_IDX(ii)];
                }

                for (uint8_t l_altRegion = 0; l_altRegion < NUM_OF_ALT_MEM_REGIONS; l_altRegion++)
                {
                    if (io_groupData.iv_data[pos][ALT_VALID(l_altRegion)])
                    {
                        FAPI_INF("Mirrored group %u needs alt bars definition, group size %u GB",
                                 pos, io_groupData.iv_data[pos][GROUP_SIZE]);
                        io_groupData.iv_data[l_mirrorOffset][ALT_SIZE(l_altRegion)] =
                            io_groupData.iv_data[pos][ALT_SIZE(l_altRegion)] / 2;
                        io_groupData.iv_data[l_mirrorOffset][ALT_VALID(l_altRegion)] = 1;
                    }
                }
            }
        }
    }

    // Assign non-mirroring base address for each group
    for (uint8_t pos = 0; pos < io_groupData.iv_numGroups; pos++)
    {
        bool l_map_mirror = i_cfgMirror &&
                            (io_groupData.iv_data[pos][PORTS_IN_GROUP] > 1);

        FAPI_DBG("pos: %d, l_map_mirror: %d",
                 pos, l_map_mirror);

        // first group goes in first region
        if (pos == 0)
        {
            FAPI_ASSERT((l_cur_nm_region_idx < l_max_nm_region_idx) &&
                        (l_nm_region_size_left >=
                         io_groupData.iv_data[pos][GROUP_SIZE]),
                        fapi2::MSS_EFF_GROUPING_NM_REGION_MAP_ERROR()
                        .set_PROC_CHIP(i_target)
                        .set_MEM_BASE_ADDRS(i_procAttrs.iv_memBaseAddr)
                        .set_CURR_GROUP_IDX(pos)
                        .set_CURR_GROUP_SIZE(io_groupData.iv_data[pos][GROUP_SIZE])
                        .set_CURR_REGION_IDX(l_cur_nm_region_idx)
                        .set_CURR_REGION_SIZE_LEFT(l_nm_region_size_left)
                        .set_MAX_REGION_IDX(l_max_nm_region_idx)
                        .set_MAX_REGION_SIZE(i_procAttrs.iv_maxGroupMemSize),
                        "Unable to map non-mirrored group!");

            FAPI_ASSERT(!l_map_mirror ||
                        ((l_cur_m_region_idx < l_max_m_region_idx) &&
                         (l_m_region_size_left >=
                          io_groupData.iv_data[pos + MIRR_OFFSET][GROUP_SIZE])),
                        fapi2::MSS_EFF_GROUPING_M_REGION_MAP_ERROR()
                        .set_PROC_CHIP(i_target)
                        .set_MIRROR_BASE_ADDRS(i_procAttrs.iv_memBaseAddr)
                        .set_CURR_GROUP_IDX(pos)
                        .set_CURR_GROUP_SIZE(io_groupData.iv_data[pos + MIRR_OFFSET][GROUP_SIZE])
                        .set_CURR_REGION_IDX(l_cur_m_region_idx)
                        .set_CURR_REGION_SIZE_LEFT(l_m_region_size_left)
                        .set_MAX_REGION_IDX(l_max_m_region_idx)
                        .set_MAX_REGION_SIZE(i_procAttrs.iv_maxGroupMemSize / 2),
                        "Unable to map mirrored group!");

            // assign non mirrored base address
            io_groupData.iv_data[pos][BASE_ADDR] =
                (i_procAttrs.iv_memBaseAddr[l_cur_nm_region_idx] >> 30);

            // assign mirrored base address
            if (l_map_mirror)
            {
                FAPI_DBG("Assigning mirrored base address (=%016lX) for pos: %d in first group",
                         l_cur_m_base_addr, pos + MIRR_OFFSET);
                io_groupData.iv_data[pos + MIRR_OFFSET][BASE_ADDR] =
                    l_cur_m_base_addr >> 30;
            }
        }
        else
        {
            if (l_nm_region_size_left >= io_groupData.iv_data[pos][GROUP_SIZE])
            {
                // stack on top of last region mapped
                io_groupData.iv_data[pos][BASE_ADDR] =
                    io_groupData.iv_data[pos - 1][BASE_ADDR] +
                    io_groupData.iv_data[pos - 1][GROUP_SIZE];

                if (l_map_mirror)
                {
                    // should have space to map mirrored group if non-mirrored
                    // group fits, assert
                    FAPI_ASSERT((l_m_region_size_left >=
                                 io_groupData.iv_data[pos + MIRR_OFFSET][GROUP_SIZE]),
                                fapi2::MSS_EFF_GROUPING_M_REGION_MAP_ERROR()
                                .set_PROC_CHIP(i_target)
                                .set_MIRROR_BASE_ADDRS(i_procAttrs.iv_memBaseAddr)
                                .set_CURR_GROUP_IDX(pos)
                                .set_CURR_GROUP_SIZE(io_groupData.iv_data[pos + MIRR_OFFSET][GROUP_SIZE])
                                .set_CURR_REGION_IDX(l_cur_m_region_idx)
                                .set_CURR_REGION_SIZE_LEFT(l_m_region_size_left)
                                .set_MAX_REGION_IDX(l_max_m_region_idx)
                                .set_MAX_REGION_SIZE(i_procAttrs.iv_maxGroupMemSize / 2),
                                "Unable to map mirrored group!");
                    io_groupData.iv_data[pos + MIRR_OFFSET][BASE_ADDR] =
                        l_cur_m_base_addr >> 30;
                    FAPI_DBG("Assigning mirrored base address (=%016lX) for pos: %d in curr region",
                             l_cur_m_base_addr, pos + MIRR_OFFSET);
                }
            }
            else
            {
                // move to next region (mirrored/non-mirrored)
                l_cur_nm_region_idx++;
                l_cur_m_region_idx++;

                // reset available size variables
                l_nm_region_size_left = i_procAttrs.iv_maxGroupMemSize;
                l_m_region_size_left = i_procAttrs.iv_maxGroupMemSize / 2;

                // assert that mappings are valid
                FAPI_ASSERT((l_cur_nm_region_idx < l_max_nm_region_idx) &&
                            (l_nm_region_size_left >=
                             io_groupData.iv_data[pos][GROUP_SIZE]),
                            fapi2::MSS_EFF_GROUPING_NM_REGION_MAP_ERROR()
                            .set_PROC_CHIP(i_target)
                            .set_MEM_BASE_ADDRS(i_procAttrs.iv_memBaseAddr)
                            .set_CURR_GROUP_IDX(pos)
                            .set_CURR_GROUP_SIZE(io_groupData.iv_data[pos][GROUP_SIZE])
                            .set_CURR_REGION_IDX(l_cur_nm_region_idx)
                            .set_CURR_REGION_SIZE_LEFT(l_nm_region_size_left)
                            .set_MAX_REGION_IDX(l_max_nm_region_idx)
                            .set_MAX_REGION_SIZE(i_procAttrs.iv_maxGroupMemSize),
                            "Unable to map non-mirrored group!");

                FAPI_ASSERT(!l_map_mirror ||
                            ((l_cur_m_region_idx < l_max_m_region_idx) &&
                             (l_m_region_size_left >=
                              io_groupData.iv_data[pos + MIRR_OFFSET][GROUP_SIZE])),
                            fapi2::MSS_EFF_GROUPING_M_REGION_MAP_ERROR()
                            .set_PROC_CHIP(i_target)
                            .set_MIRROR_BASE_ADDRS(i_procAttrs.iv_memBaseAddr)
                            .set_CURR_GROUP_IDX(pos)
                            .set_CURR_GROUP_SIZE(io_groupData.iv_data[pos + MIRR_OFFSET][GROUP_SIZE])
                            .set_CURR_REGION_IDX(l_cur_m_region_idx)
                            .set_CURR_REGION_SIZE_LEFT(l_m_region_size_left)
                            .set_MAX_REGION_IDX(l_max_m_region_idx)
                            .set_MAX_REGION_SIZE(i_procAttrs.iv_maxGroupMemSize / 2),
                            "Unable to map mirrored group!");

                // reset mirror base address
                l_cur_m_base_addr = i_procAttrs.iv_mirrorBaseAddr[l_cur_m_region_idx];
                FAPI_DBG("Resetting mirror base address: %016lX",
                         l_cur_m_base_addr);

                // assign non mirrored base address
                io_groupData.iv_data[pos][BASE_ADDR] =
                    (i_procAttrs.iv_memBaseAddr[l_cur_nm_region_idx] >> 30);

                // assign mirrored base address
                if (l_map_mirror)
                {
                    io_groupData.iv_data[pos + MIRR_OFFSET][BASE_ADDR] =
                        l_cur_m_base_addr >> 30;
                    FAPI_DBG("Assigning mirrored base address (=%016lX) for pos: %d in new region",
                             l_cur_m_base_addr, pos + MIRR_OFFSET);
                }
            }
        }

        // update remaining size in region
        l_nm_region_size_left -= io_groupData.iv_data[pos][GROUP_SIZE];
        l_m_region_size_left -= (io_groupData.iv_data[pos][GROUP_SIZE] / 2);
        FAPI_DBG("l_nm_region_size_left: %016lX, l_m_region_size_left: %016lX",
                 l_nm_region_size_left, l_m_region_size_left);

        // increment mirrored address (regardless of whether mapped
        // for this group)
        l_cur_m_base_addr += (((uint64_t) io_groupData.iv_data[pos][GROUP_SIZE] << 30) / 2);
        FAPI_DBG("l_cur_m_base_addr: %016lX",
                 l_cur_m_base_addr);

        // set alt region information directly based on base region mapping
        for (uint8_t ii = 0; ii < NUM_OF_ALT_MEM_REGIONS; ii++)
        {
            if (io_groupData.iv_data[pos][ALT_VALID(ii)])
            {
                io_groupData.iv_data[pos][ALT_BASE_ADDR(ii)] =
                    io_groupData.iv_data[pos][BASE_ADDR] +
                    io_groupData.iv_data[pos][GROUP_SIZE] -
                    io_groupData.iv_data[pos][ALT_SIZE(ii)];

                if (l_map_mirror)
                {
                    io_groupData.iv_data[pos + MIRR_OFFSET][ALT_BASE_ADDR(ii)] =
                        io_groupData.iv_data[pos + MIRR_OFFSET][BASE_ADDR] +
                        io_groupData.iv_data[pos + MIRR_OFFSET][GROUP_SIZE] / 2;
                    io_groupData.iv_data[pos + MIRR_OFFSET][ALT_VALID(ii)] = 1;
                }
            }
        }
    }

fapi_try_exit:
    FAPI_DBG("Exiting");
    return fapi2::current_err;
}

///
/// @brief Sets the ATTR_MSS_MEM_MC_IN_GROUP attribute
///
/// @param[in] i_target    Reference to Processor Chip target
/// @param[in] i_groupData Group Data
///
/// @return FAPI2_RC_SUCCESS if success, else error code.
///
fapi2::ReturnCode grouping_setATTR_MSS_MEM_MC_IN_GROUP(
    const fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target,
    const EffGroupingData& i_groupData)
{
    FAPI_DBG("Entering");

    fapi2::buffer<uint8_t> MC_IN_GP;
    uint8_t l_mcPort_in_group[NUM_MC_PORTS_PER_PROC];
    memset(l_mcPort_in_group, 0, sizeof(l_mcPort_in_group));

    for (uint8_t ii = 0; ii < i_groupData.iv_numGroups; ii++)
    {
        MC_IN_GP = 0;
        uint8_t l_count = i_groupData.iv_data[ii][PORTS_IN_GROUP];

        for (uint8_t jj = 0; jj < l_count; jj++)
        {
            MC_IN_GP.setBit( i_groupData.iv_data[ii][MEMBER_IDX(jj)] );
        }

        l_mcPort_in_group[ii] = MC_IN_GP;
    }

    FAPI_INF("grouping_setATTR_MSS_MEM_MC_IN_GROUP: ");

    for (uint8_t ii = 0; ii < NUM_MC_PORTS_PER_PROC; ii++)
    {
        FAPI_INF("  ATTR_MSS_MEM_MC_IN_GROUP[%d]: 0x%02x",
                 ii, l_mcPort_in_group[ii]);
    }

    FAPI_TRY(FAPI_ATTR_SET(fapi2::ATTR_MSS_MEM_MC_IN_GROUP, i_target,
                           l_mcPort_in_group),
             "Error setting ATTR_MSS_MEM_MC_IN_GROUP, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

fapi_try_exit:
    FAPI_DBG("Exiting");
    return fapi2::current_err;
}

///
/// @brief Traces the Grouping Data
///
/// @param[in] i_sysAttrs  System Attributes
/// @param[in] i_groupData Group Data
///
void grouping_traceData(const EffGroupingSysAttrs& i_sysAttrs,
                        const EffGroupingData& i_groupData)
{
    FAPI_DBG("Entering");

    // Display number of groups
    FAPI_INF("Total number of Memory groups: %u", i_groupData.iv_numGroups);

    // Display non-mirror groups
    for (uint8_t ii = 0; ii < i_groupData.iv_numGroups; ii++)
    {
        FAPI_INF("NON-MIRROR - Group %u: ", ii);
        FAPI_INF("    MC port size %d GB", i_groupData.iv_data[ii][PORT_SIZE]);
        FAPI_INF("    Num of ports %d", i_groupData.iv_data[ii][PORTS_IN_GROUP]);
        FAPI_INF("    Group size  %d GB", i_groupData.iv_data[ii][GROUP_SIZE]);
        FAPI_INF("    Base addr %.16lld", i_groupData.iv_data[ii][BASE_ADDR]);

        for (uint8_t jj = 0; jj < NUM_OF_ALT_MEM_REGIONS; jj++)
        {
            FAPI_INF("    ALT-BAR(%d) valid %d ", jj, i_groupData.iv_data[ii][ALT_VALID(jj)]);
            FAPI_INF("    ALT-BAR(%d) size %d ", jj, i_groupData.iv_data[ii][ALT_SIZE(jj)]);
            FAPI_INF("    ALT-BAR(%d) base addr %u", jj, i_groupData.iv_data[ii][ALT_BASE_ADDR(jj)]);
        }

        // Display MC in groups
        for (uint8_t jj = 0; jj < i_groupData.iv_data[ii][PORTS_IN_GROUP]; jj++)
        {
            FAPI_INF("    Contains MC %d",
                     i_groupData.iv_data[ii][MEMBER_IDX(jj)]);
        }
    }

    // Display mirror groups
    if (i_sysAttrs.iv_hwMirrorEnabled)
    {
        for (uint8_t ii = 0; ii < i_groupData.iv_numGroups; ii++)
        {
            uint8_t l_mirrorOffset = ii + MIRR_OFFSET;

            // Only display valid mirrored group
            if (i_groupData.iv_data[l_mirrorOffset][GROUP_SIZE] > 0)
            {
                FAPI_INF("MIRROR - Group %u: ", l_mirrorOffset);
                FAPI_INF("    MC port size %d GB", i_groupData.iv_data[l_mirrorOffset][PORT_SIZE]);
                FAPI_INF("    Num of ports %d", i_groupData.iv_data[l_mirrorOffset][PORTS_IN_GROUP]);
                FAPI_INF("    Group size  %d GB", i_groupData.iv_data[l_mirrorOffset][GROUP_SIZE]);
                FAPI_INF("    Base addr 0x%08x", i_groupData.iv_data[l_mirrorOffset][BASE_ADDR]);

                for (uint8_t jj = 0; jj < NUM_OF_ALT_MEM_REGIONS; jj++)
                {
                    FAPI_INF("    ALT-BAR(%d) valid %d ", jj, i_groupData.iv_data[l_mirrorOffset][ALT_VALID(jj)]);
                    FAPI_INF("    ALT-BAR(%d) size %d ", jj, i_groupData.iv_data[l_mirrorOffset][ALT_SIZE(jj)]);
                    FAPI_INF("    ALT-BAR(%d) base addr 0x%08X", jj, i_groupData.iv_data[l_mirrorOffset][ALT_BASE_ADDR(jj)]);
                }

                // Display MC in groups
                for (uint8_t jj = 0; jj < i_groupData.iv_data[l_mirrorOffset][PORTS_IN_GROUP]; jj++)
                {
                    FAPI_INF("    Contains MC %d",
                             i_groupData.iv_data[l_mirrorOffset][MEMBER_IDX(jj)]);
                }
            }
        }
    }

    FAPI_DBG("Exiting");
    return;
}

///
/// @brief p9_mss_eff_grouping procedure entry point
/// See doxygen in p9_mss_eff_grouping.H
///
fapi2::ReturnCode p9_mss_eff_grouping(
    const fapi2::Target<fapi2::TARGET_TYPE_PROC_CHIP>& i_target)
{
    FAPI_DBG("Entering");

    // Create data structures for grouping operation
    EffGroupingSysAttrs l_sysAttrs;
    EffGroupingProcAttrs l_procAttrs;
    EffGroupingMemInfo l_memInfo;
    EffGroupingBaseSizeData l_baseSizeData;
    EffGroupingData l_groupData;
    bool l_mirrorIsOn = false;

    // ----------------------------------------------
    // Get the attributes needed for memory grouping
    // ----------------------------------------------
    FAPI_INF("Getting system memory grouping attributes");

    // Get the system attributes needed to perform grouping
    FAPI_TRY(l_sysAttrs.getAttrs(),
             "l_sysAttrs.getAttrs() returns an error, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Get the proc target attributes needed to perform grouping
    FAPI_TRY(l_procAttrs.getAttrs(i_target, l_sysAttrs),
             "l_procAttrs.getAttrs() returns an error, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Check that the system and processor chip attributes are valid
    FAPI_TRY(grouping_checkValidAttributes(i_target, l_sysAttrs, l_procAttrs),
             "grouping_checkValidAttributes() returns an error, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // ------------------------------------------------------------------
    // Get the memory sizes behind MC ports
    // ------------------------------------------------------------------
    FAPI_INF("Getting memory sizes behind MC ports");
    FAPI_TRY(l_memInfo.getMemInfo(i_target),
             "p9_mss_eff_grouping: l_memInfo.get_memInfo() returns an error, "
             "l_rc 0x%.8X", (uint64_t)fapi2::current_err);

    // ----------------------------------------------------------------------
    // Attempt to group the memory per Group port (per MCA/DMI).
    // P9 MC architecture allows 1, 2, 3, 4, 6, or 8 MC ports to be grouped
    // together.
    // All of the grouping functions are called if allowed.
    // If the memory cannot be grouped by one function they may be grouped by
    // the subsequent functions.
    // ----------------------------------------------------------------------
    FAPI_INF("Attempt memory grouping");

    // Group MCs
    if (l_sysAttrs.iv_groupsAllowed & GROUP_8)
    {
        grouping_group8PortsPerGroup(l_memInfo, l_groupData);
    }

    if (l_sysAttrs.iv_groupsAllowed & GROUP_6)
    {
        // HW423110 - If mirror (i.e. Cumulus and mirror is enabled)
        // then do not allow Group of 6
        if ( (l_memInfo.iv_nimbusProc == false) &&
             (l_sysAttrs.iv_hwMirrorEnabled) )
        {
            FAPI_INF("Group of 6 is not allowed on Cumulus with Mirror enabled");
        }
        else
        {
            grouping_group6PortsPerGroup(l_memInfo, l_groupData);
        }
    }

    if (l_sysAttrs.iv_groupsAllowed & GROUP_4)
    {
        grouping_group4PortsPerGroup(l_memInfo, l_groupData);
    }

    if (l_sysAttrs.iv_groupsAllowed & GROUP_3)
    {
        grouping_group3PortsPerGroup(l_memInfo, l_groupData);
    }

    if (l_sysAttrs.iv_groupsAllowed & GROUP_2)
    {
        grouping_group2PortsPerGroup(l_memInfo, l_groupData);
    }

    if (l_sysAttrs.iv_groupsAllowed & GROUP_1)
    {
        grouping_group1PortsPerGroup(l_memInfo, l_groupData);
    }

    // Verify all ports are grouped, or error out
    if (l_memInfo.iv_nimbusProc == true)
    {
        auto l_mcaChiplets = i_target.getChildren<fapi2::TARGET_TYPE_MCA>();
        FAPI_TRY(grouping_findUngroupedPorts(l_mcaChiplets, l_memInfo, l_groupData),
                 "grouping_findUngroupedPorts() returns an error, l_rc 0x%.8X",
                 (uint64_t)fapi2::current_err);
    }
    else
    {
        auto l_dmiChiplets = i_target.getChildren<fapi2::TARGET_TYPE_DMI>();
        FAPI_TRY(grouping_findUngroupedPorts(l_dmiChiplets, l_memInfo, l_groupData),
                 "grouping_findUngroupedPorts() returns an error, l_rc 0x%.8X",
                 (uint64_t)fapi2::current_err);
    }

    // Calculate Alt Memory
    grouping_calcAltMemory(l_groupData);

    // Sort Groups from high memory size to low
    grouping_sortGroups(l_groupData);

    // Calculate the total non mirrored size
    for (uint8_t pos = 0; pos < l_groupData.iv_numGroups; pos++)
    {
        l_groupData.iv_totalSizeNonMirr += l_groupData.iv_data[pos][GROUP_SIZE];
    }

    FAPI_INF("Total non-mirrored size %u GB", l_groupData.iv_totalSizeNonMirr);

    // Set mirror groups
    setupMirrorGroup(i_target, l_sysAttrs, l_groupData);

    for (uint8_t l_group = 0; l_group < l_groupData.iv_numGroups; l_group++)
    {
        if (l_groupData.iv_mirrorOn[l_group] == 1)
        {
            l_mirrorIsOn = true;
            break;
        }
    }

    FAPI_INF("Mapping groups to regions (mirroring=%s)",
             (l_mirrorIsOn ? ("enabled") : ("disabled")));

    // Calculate base and alt-base addresses
    FAPI_TRY(grouping_calcRegions(i_target, l_procAttrs, l_mirrorIsOn, l_groupData),
             "Error from grouping_calcRegions, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Set the ATTR_MSS_MEM_MC_IN_GROUP attribute
    FAPI_TRY(grouping_setATTR_MSS_MEM_MC_IN_GROUP(i_target, l_groupData),
             "grouping_setATTR_MSS_MEM_MC_IN_GROUP() returns error, l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Trace a summary of the Grouping Data
    grouping_traceData(l_sysAttrs, l_groupData);

    // Set memory base and size
    l_baseSizeData.setBaseSizeData(l_sysAttrs, l_groupData);

    // Set HTM/OCC base addresses
    FAPI_TRY(l_baseSizeData.set_HTM_OCC_base_addr(i_target, l_sysAttrs,
             l_groupData, l_procAttrs),
             "set_HTM_OCC_base_addr() returns error l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

    // Set Memory Base and Size FAPI Attributes
    FAPI_TRY(l_baseSizeData.setBaseSizeAttr(i_target, l_sysAttrs, l_groupData),
             "setBaseSizeAttr returns error l_rc 0x%.8X",
             (uint64_t)fapi2::current_err);

fapi_try_exit:
    FAPI_DBG("Exiting");
    return fapi2::current_err;
}