# Note : Assumes these vars were setup in startup.simics
# $hb_masterproc : name of master proc chip object
# $hb_pnor : name of pnor object associated with master proc

($hb_masterproc).proc_fsi2host_mbox->responder_enable=1

# @todo RTC:138068 Replace this when we get a working image
$hb_pnor.sfc_master_mem.load-file $hb_pnor->flash_file

# Preload VPD in PNOR
    try {
        run-python-file (lookup-file hbfw/hb-pnor-vpd-preload.py)
            ($hb_pnor).sfc_master_mem.load-file ./sysmvpd.dat.ecc 0x1C5000
            ($hb_pnor).sfc_master_mem.load-file ./sysspd.dat.ecc 0x17D000
            ($hb_pnor).sfc_master_mem.load-file ./syscvpd.dat.ecc 0x255000
    } except { echo "ERROR: Failed to preload VPD into PNOR." }

#Write the PNOR MMIO addr into Scratch 2, 0x283A
($hb_masterproc).proc_lbus_map.write 0x28e8 0xFFF78000  #HB PNOR addr
foreach $cc in (get-object-list p9_proc) {
    ($cc).proc_lbus_map.write 0x28e8 0xFFF78000
}

# Loop through every processor chip
foreach $cc in (get-object-list p9_proc) {
    echo $cc

    #Trigger a power on to cec-chip
    #echo "-Trigger power on"
    @mp="%s.proc_chip"%simenv.cc
    @SIM_get_interface(SIM_get_object(mp),"signal").signal_raise()

    # @todo-RTC:130184 Add real SBE behavior
    #Trigger the flush, load, and SBE start
    #echo "-Trigger SBE"
    #($cc).proc_lbus_map.write 0x28E0 0x0000F3FF  #NonFunc EX (only 4,5 is good)
    #($cc).proc_lbus_map.write 0x2848 0x00000FFF  #GP3 0x2812 (flush)
    #($cc).proc_lbus_map.write 0x2870 0xB0000000  #SBE Vital 0x281C (load)
    #($cc).proc_lbus_map.write 0x2870 0x30000000  #SBE Vital 0x281C (start)
    # workaround to trigger sbe start
    ($cc).proc_chip.invoke parallel_store STARTSBEREGS 0 "80000000" 32
}

system_cmp0.cpu0_0_00_0.enable

###################################
#Enable the IPMI Responder
###################################
echo "Enable IPMI Responder"
try {
      run-python-file (lookup-file hbfw/ipmi_bt_responder.py)
} except { echo "ERROR: Failed to load IPMIresponder." }