| Commit message (Collapse) | Author | Age | Files | Lines |
... | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This hardware procedure is used to read out the chipId and the EC
level of a given explorer ocmb. The chipId is an IBM standard that
provides information about what kind of chip it is and where it was
made. The EC is the write level of the chip. The initial plan was to
read all of this info from the CHIP_INFO register but we found that the
2nd nibble of the EC level , which represents the "minor" ec level, was
not populated correctly so we must instead read that value from the
EFUSE_OUT3 regsiter.
Change-Id: Id3dca4449c010ad42f7f3d55428b4efb3f6dfbf0
RTC: 214627
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82712
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Reviewed-by: Louis Stermole <stermole@us.ibm.com>
Reviewed-by: Mark Pizzutillo <mark.pizzutillo@ibm.com>
Reviewed-by: Jennifer A Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82784
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The obus optical config bits to enable the npu cannot be set
before the NPU transport muxes have been configured or
link errors are generated on Axone. This issue was not
seen on Nimbus/Cumulus so the existing sequence is kept
for those chips.
Change-Id: I95a967213e8d8fd3b3e894c72a073e9f10913f00
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/78203
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Jenny Huynh <jhuynh@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com>
Reviewed-by: Mark S Fredrickson <mfred@us.ibm.com>
Reviewed-by: Jennifer A Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/78214
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: Ic8dea5a3077a34ff10ade3c01f1a5031294156ef
CQ: SW473843
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82947
Reviewed-by: Paul Greenwood <paul.greenwood@ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Brian J Stegmiller <bjs@us.ibm.com>
Reviewed-by: Zane C Shelley <zshelle@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82949
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Added a firmware notify interface, gard_event_t, to accept a
gard event message, from PHYP/OPAL, to log that event.
Change-Id: I9bcf684f0850c9a07ab7d46635aa07a2c1e9917c
RTC: 210201
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82199
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Adds part callouts for all BPM related error logs and collects BPM
traces for any errors that are returned from interactions with the
NVDIMM to provide context. Additionally, if there is an error during the
config updates the code will erase the firmware section to force an
update on any subsequent attempt.
Change-Id: I045b4ba1feea2fbc1ddb5e418bf60b86d6c11bb1
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82946
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
Reviewed-by: Corey V Swenson <cswenson@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There was a lingering issue where an error that was retryable was
thought to be non-retryable. This propagated out of blockWrite() causing
the update to think it had failed when it fact it had not.
Change-Id: I536e79ddd4ac476fdf1aa0b370f81f4b0b198f4c
RTC: 212448
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82614
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Calculate the percentage utilization of a pnor partition by
using binary file size + header size + ecc overhead (if used for partition).
User is warned when a pnor partition exceeds a specific utilization threshold
Change-Id: I00b0b69a039ffefdf086dc470fd0f76b72ee267d
RTC: 212220
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81990
Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E Bofferding <bofferdn@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change fixes an issue where the HBRT reserved trace buffer can
be placed in a new location than it's origination.
When HB crashes, the reserved trace buffer is persisted until next IPL.
With OPAL, the reserved trace buffer may be in a different memory
location than where the buffer was when it crashed, therefore all
internal pointers will be invalid. This change will detect the change
in buffer location and realign all internal pointers to be valid
once again. This is not an issue with PHYP, only with OPAL.
Change-Id: I476845550062433fba190294b0bd2bbcf8dad658
RTC: 206137
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82094
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
Reviewed-by: Glenn Miles <milesg@ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I8160d9662859232dfd612b3a2f5c1c522c02e308
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82534
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If section does not have a starting offset, calculate starting
offset using previous section's offset/size, generate a new
output file with offsets and feed into existing tools, throw
error if any sections collide
Change-Id: I9adf3357b3751087535854a89fc634a415b870d0
RTC: 212219
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80098
Reviewed-by: Nicholas E Bofferding <bofferdn@us.ibm.com>
Reviewed-by: Glenn Miles <milesg@ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I85b34168b8a93ea8c744b6a79f207ce924cdf50f
RTC:195557
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/79326
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I0f721760eebfd805cfd6b939d75d42ec2d46cdc2
CQ: SW469988
Backport: release-op920
Backport: release-op930
Backport: release-op940
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82785
Reviewed-by: Caleb N Palmer <cnpalmer@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Zane C Shelley <zshelle@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82881
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There were a couple functions that checked for non-SMP mode that could
be called for types other than OBUS. This would cause an assert when
calling the SMP mode check.
Change-Id: I044108e40c305cd87861989c0dd69bda3bd79480
CQ: SW473849
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82851
Reviewed-by: Caleb N Palmer <cnpalmer@us.ibm.com>
Reviewed-by: Paul Greenwood <paul.greenwood@ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Zane C Shelley <zshelle@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82880
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I0dd124c1d797baa50de78f01f01c29b6af524a32
CQ: SW473646
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82702
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Benjamen G Tyner <ben.tyner@ibm.com>
Reviewed-by: Zane C Shelley <zshelle@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82761
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- 0x10: Contents are encrypted
Set when encryption is enabled
Clear when encryption is disabled
Attribute comments should match HDAT
Change-Id: I52805f6c8c3f303ce29cf8b8534304dfd0a09821
RTC:214625
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82638
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
nvdimmResetController() will call nvdimm_encrypt_unlock() to unlock
encryption if needed. Without it nvdimm ops could fail on runtime
Change-Id: Iad4c4d354d3b9522ee0544b5c8de7484dcf89c6c
CQ:SW474050
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82838
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
-fix NVDIMM FFDC misalignment
-correct NV_STATUS enum naming
Change-Id: Ib0084f5fb95ce8a93ee5e85a0790878469065acb
CQ:SW473934
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82775
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: Id377be5775a8b660818ef39dfa724bbc4c11969d
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82533
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Reviewed-by: Louis Stermole <stermole@us.ibm.com>
Reviewed-by: Mark Pizzutillo <mark.pizzutillo@ibm.com>
Reviewed-by: Jennifer A Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82714
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I6468addadd23f6f252ade88eacfd6a1fd2f47025
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82625
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com>
Reviewed-by: Mark Pizzutillo <mark.pizzutillo@ibm.com>
Reviewed-by: Devon A Baughen <devon.baughen1@ibm.com>
Reviewed-by: Jennifer A Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82636
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Allocate HTM/OCC memory location in order from largest -> smallest.
- Verify memory bar addresses aligned with memory allocation size.
Set #3: Address Joe's and Jenny's comments from set #2
Change-Id: I1000b3d6de371c129ae62ca53be36b632a1c545e
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82121
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Reviewed-by: Joseph J McGill <jmcgill@us.ibm.com>
Reviewed-by: Jenny Huynh <jhuynh@us.ibm.com>
Reviewed-by: Jennifer A Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82196
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I9b91640992550a61d9fd20ea605fb9a2f9b776b7
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81463
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
Reviewed-by: Mark Pizzutillo <mark.pizzutillo@ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Reviewed-by: Jennifer A Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81485
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I6efe5d4f8fbb9f893a2371acd108d9d1d3002ecd
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82496
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Reviewed-by: Matt K Light <mklight@us.ibm.com>
Reviewed-by: Thi N Tran <thi@us.ibm.com>
Reviewed-by: Jennifer A Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82504
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I88903ba637a1f89910fcd226325a220c98169945
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82617
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Caleb N Palmer <cnpalmer@us.ibm.com>
Reviewed-by: Benjamen G Tyner <ben.tyner@ibm.com>
Reviewed-by: Zane C Shelley <zshelle@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82786
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I5f912de4fd98914e6b9f4fd9ff2cbbb2134575ad
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82772
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Reviewed-by: William G Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
See defect for register list and hard-coded values
Change-Id: Ibc32ddfcb4719388dd744aa946df62e27066a05c
CQ:SW472435
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82348
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Glenn Miles <milesg@ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Missing a few things in our mrw xml processing for OMIC
targets.
- Added a maxInstance value for the OMIC targets. This
prevents the HUIDs from repeating the same value behind each proc.
- Modified OMIC_PARENT calculation to use existing PATHs
instead of calculating (incorrectly) from FAPI_POS.
- Added correct unit_pos calculation
Change-Id: I4e0dee4ec1aa9a080f2ce49922659c4c7b5ca548
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82629
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Chen Du <duchen@us.ibm.com>
Reviewed-by: William G Hoffa <wghoffa@us.ibm.com>
Reviewed-by: Nicholas E Bofferding <bofferdn@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A bug was discovered on OpenPOWER systems wherein if SMF
is enabled, we would checkstop in istep10.1 when trying
to XSCOM to the slave proc. The issue was that SBE at that
time didn't know we were booting in SMF mode and so didn't
set up the XSCOM BAR for the slave proc appropriately.
The solution is to force SBE update in istep7.5 if SMF is
enabled in the MRW (ATTR_SMF_CONFIG) but SBE doesn't yet
know about that (bit 16 in scratch reg6 is not set).
Change-Id: Ibaa2d1e5b441f378528443aa84e5cd61789792dd
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81950
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E Bofferding <bofferdn@us.ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I47d4612fa063cd43e3d49e4cc47e466620add3c9
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82514
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Benjamen G Tyner <ben.tyner@ibm.com>
Reviewed-by: Zane C Shelley <zshelle@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A few new part callouts were added to support the NVDIMM function
but a corresponding error log subsystem was never added.
This change also adds a testcase to check for missing subsystems
going forward.
Change-Id: I523840615fe734553dd30af8e608c1aa214fd2dc
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82591
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Corey V Swenson <cswenson@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: ARAVIND T. NAIR <aravindnair@in.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The ID/EC values of Gemini card are written to SPD contain on its
eeprom device but we need to validate that the SPD matches what the
contents of the actual regisers are when we get up to a point where
we can read these registers.
Change-Id: I11874573e8978e3b0ebb652ded800f2d68d1d40b
RTC:209353
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82118
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matthew Raybuck <matthew.raybuck@ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: Icfab984a55c660ec10bfb5b5b268f6ef2aa9ff32
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82153
Reviewed-by: Mark Pizzutillo <mark.pizzutillo@ibm.com>
Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Dev-Ready: Louis Stermole <stermole@us.ibm.com>
Reviewed-by: Jennifer A Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82193
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Software callouts, ADD_SW_CALLOUT, where added to the error logs
for errors associated with the health check status when they
should not have. Changed them to NO_SW_CALLOUT.
Change-Id: Iccf5289a38053aa3eccaa59b200a99fa1f14f83b
CQ: SW473391
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82540
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Corey V Swenson <cswenson@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
verbose is not a parameter for handle_duplicates.pl so
it should not be called from makefile.
Results in two cluttering/misleading traces:
Unknown option: verbose
Change-Id: I6a8f1a383ec3351c50b18080f7215635e657cc76
CQ:SW473214
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82452
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Corey V Swenson <cswenson@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: Ia5e6c86124b1a5ecece87eed43721fc38486ae88
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82216
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Benjamen G Tyner <ben.tyner@ibm.com>
Reviewed-by: Zane C Shelley <zshelle@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82566
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I925e06e59ecab97d4f951ea4eafca6d27238312d
RTC: 199037
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82156
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Benjamen G Tyner <ben.tyner@ibm.com>
Reviewed-by: Paul Greenwood <paul.greenwood@ibm.com>
Reviewed-by: Zane C Shelley <zshelle@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82565
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: Ifc379d6180fc85f784397d66cfc5a6aed8c2670d
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81992
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Paul Greenwood <paul.greenwood@ibm.com>
Reviewed-by: Caleb N Palmer <cnpalmer@us.ibm.com>
Reviewed-by: Benjamen G Tyner <ben.tyner@ibm.com>
Reviewed-by: Zane C Shelley <zshelle@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82030
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I099c3ab4d5a1b14936097d7d231682a0362a3be1
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82139
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Reviewed-by: Louis Stermole <stermole@us.ibm.com>
Reviewed-by: Mark Pizzutillo <mark.pizzutillo@ibm.com>
Reviewed-by: Jennifer A Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82316
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I2d78d348aa64f40410b697aae9bdd44ebc8faf1b
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82086
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Reviewed-by: Louis Stermole <stermole@us.ibm.com>
Reviewed-by: Mark Pizzutillo <mark.pizzutillo@ibm.com>
Reviewed-by: Jennifer A Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82238
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Key_Cronus_Test=PM_REGRESS
Change-Id: I706ec7b87e777b736153d5765ced0a3f6cea5d96
CQ: SW470688
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81266
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com>
Tested-by: Cronus HW CI <cronushw-ci+hostboot@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com>
Reviewed-by: YUE DU <daviddu@us.ibm.com>
Reviewed-by: RANGANATHPRASAD G. BRAHMASAMUDRA <prasadbgr@in.ibm.com>
Reviewed-by: Jennifer A Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81559
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: Id2203423b5cde2f0babfb30adfb5875ebf8ab2be
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82194
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Reviewed-by: Louis Stermole <stermole@us.ibm.com>
Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com>
Reviewed-by: Jennifer A Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82206
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
p9_tracearray_defs.H:
- adjust value of PROC_TB_LAST_AXONE_CHIP_TARGET, to cover NPU busses
only
- introduce PROC_TB_LAST_AXONE_MC_TARGET, to cover OMI busses
that logically associate with MC pervasive targets
p9_proc_gettracearray.H:
- update proc_gettracearray_target_type to return TARGET_TYPE_MC for
Axone OMI busses
p9_sbe_tracearray.H:
- update p9_sbe_tracearray_target_type to return TARGET_TYPE_PERV for
Axone OMI busses
p9_proc_gettracearray_wrap.C:
- add eCMD looper to determine chip type
- use chip type to swizzle target type returned by
proc_gettracearray_target_type from MCBIST to MC, when running
on Axone or Cumulus
Change-Id: I5c729385c685ed3b1aac02f1f63b2c81f3e2f0e0
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82308
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com>
Reviewed-by: Adam S Hale <adam.samuel.hale@ibm.com>
Dev-Ready: Joseph J McGill <jmcgill@us.ibm.com>
Reviewed-by: Benjamin Gass <bgass@us.ibm.com>
Reviewed-by: Jennifer A Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82318
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit turns on BPM updates and fixes several issues that were
preventing them from occuring successfully.
Change-Id: I2aa544c59f04fcc06bf7f10bdff5026579d7f053
RTC:212448
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82487
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
First line of error log comment must include /*@
or error log will not be documented. Also fixed
in other HB files.
Change-Id: Ifa5eba6d6abd7f8565a4cc8d62a25a2b833725f2
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82497
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E Bofferding <bofferdn@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: Ibe98c4b9f56efa7fc2edd75cab4b11f13e5226b4
CQ: SW473078
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82347
Reviewed-by: Benjamen G Tyner <ben.tyner@ibm.com>
Reviewed-by: Zane C Shelley <zshelle@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82441
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Needed to disable i2c explorer command tests during
runtime. Currently just support mmio operations for runtime.
Change-Id: Ifd2888b1deb03b76408b03516a9dd030896e1ee1
RTC:210321
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80236
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update the simics scripts to use variables provided by simics
Change-Id: I5c01760630911d723286fcb1450a78e7e44c56a1
RTC: 204842
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82306
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Corey V Swenson <cswenson@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Helps ease porting for p10 by removing chip specific
code and targets that doesn't exit in p10 master
Change-Id: I986070c358d9513b8b89c7d10c27418cd0d43e70
Original-Change-Id: Iaae2dc44f48d208bcf6b80e9555f7cfec060b390
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80607
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com>
Reviewed-by: Mark Pizzutillo <mark.pizzutillo@ibm.com>
Dev-Ready: ANDRE A MARIN <aamarin@us.ibm.com>
Reviewed-by: Jennifer A Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82439
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I6abab4893b95330fbac2753f6c6e827f158864b9
Original-Change-Id: I3b5ce73bce01b36fa8faef7810002eecabbe6d35
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/75003
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com>
Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com>
Dev-Ready: Alvin Wang <wangat@tw.ibm.com>
Reviewed-by: Louis Stermole <stermole@us.ibm.com>
Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82438
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I69c6618e3ef9d98c7b46d5b8a0e9379fa759ff41
Original-Change-Id: Ib717742707bea6a626131578f5a3b1aeebc76281
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69677
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com>
Dev-Ready: STEPHEN GLANCY <sglancy@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Reviewed-by: Louis Stermole <stermole@us.ibm.com>
Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com>
Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82437
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
Tested-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix p9_mss_grouping dependancy
Fix setup_bars include path
build-fix
Change-Id: I0883347bd830977a783cc6fddb74534858c074a1
Original-Change-Id: Ie32721f027f48a4faf3842bc30a1632cbaca1d93
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/75082
Dev-Ready: Steven B. Janssen <janssens@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Reviewed-by: Louis Stermole <stermole@us.ibm.com>
Reviewed-by: Steven B. Janssen <janssens@us.ibm.com>
Reviewed-by: ANDRE A. MARIN <aamarin@us.ibm.com>
Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82436
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
Tested-by: Daniel M Crowell <dcrowell@us.ibm.com>
|