| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replaced the invalid trace buffer "FW_REQ" with valid trace buffer
RUNTIME_COMP_NAME in a collectTrace call.
Change-Id: I9e75efd1cda4a86781f4075d774df8dcbc00cb8b
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81317
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Matthew Raybuck <matthew.raybuck@ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We did not figure out what register to read prior to bringup. This
commit will allow progress on the gemini swift machines until we
determine the correct register to read.
Change-Id: I7319e3fc204efe08c4cc38cf354df28cca87346b
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81213
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit removes the MVPD, MEMD and CENHWIMG sections from the axone
pnor layout as they are not being used and pnor space is limited.
Along with removing the defintion in the pnor layout xml some code
changes were required to no longer attempt to load the MVPD/MEMD sections.
Change-Id: I20739e30ad497737c0a30b66cc36052c08c11de2
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80295
Reviewed-by: Glenn Miles <milesg@ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While building up the reserved memory sections if we encounter
and error trying to load one of the reserved memory sections we
should stop iterating through the sections and return the error.
Change-Id: I0652cdf9a9ce28c91092be01105938d9a3b6a0bb
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80217
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When the TPM required policy is off, node comm path should
not commit any errors as to not confuse the testers/customers.
This commit silences the errors from the node comm protocol
when TPM is not required. In addition, when TPM is required,
we want to fail the boot if node comm is unsuccessful. Logic
has been added to pass the error info up to FSP in case
of any error in istep18 (when node comm runs).
Change-Id: I76d48780790b6fee759b3ccc60a858f0a8835dee
CQ: SW466658
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80937
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Reviewed-by: Glenn Miles <milesg@ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I06f6cccdc5f55cdbd6a91240a034e6e46fe1fc30
CQ: SW471022
Backport: release-fips930
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80823
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Brian J Stegmiller <bjs@us.ibm.com>
Reviewed-by: Caleb N Palmer <cnpalmer@us.ibm.com>
Reviewed-by: Paul Greenwood <paul.greenwood@ibm.com>
Reviewed-by: Zane C Shelley <zshelle@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81063
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: Iaa1c8b4e92377f2b6bf854f21ee334e915745ff5
CQ: SW470603
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80608
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Brian J Stegmiller <bjs@us.ibm.com>
Reviewed-by: Paul Greenwood <paul.greenwood@ibm.com>
Reviewed-by: Zane C Shelley <zshelle@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81062
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I22be3cdc538624980aeb958725245071925f0e7a
CQ: SW470335
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/77690
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Benjamen G. Tyner <ben.tyner@ibm.com>
Reviewed-by: Paul Greenwood <paul.greenwood@ibm.com>
Reviewed-by: Brian J. Stegmiller <bjs@us.ibm.com>
Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81061
Reviewed-by: Zane C Shelley <zshelle@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: If91bf9ce96e2e56fc1abd33baf5217347740acb3
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80605
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Brian J. Stegmiller <bjs@us.ibm.com>
Reviewed-by: Benjamen G. Tyner <ben.tyner@ibm.com>
Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81060
Reviewed-by: Zane C Shelley <zshelle@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I55ecce1a2665accdef7087430ab4e5dbe0388831
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80408
Reviewed-by: Brian J. Stegmiller <bjs@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Benjamen G. Tyner <ben.tyner@ibm.com>
Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81059
Reviewed-by: Zane C Shelley <zshelle@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I6a705fc2429b1b49b766f72d1ace818ad8b9b87d
RTC: 199034
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80168
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Benjamen G. Tyner <ben.tyner@ibm.com>
Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81058
Reviewed-by: Zane C Shelley <zshelle@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: Id553eb5d4ab2dd716331f7ffbda12b18096bd2bd
RTC: 208211
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80110
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81057
Reviewed-by: Zane C Shelley <zshelle@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I6733b2b9062c5ac7b348bcc5ff0171ab384fba9a
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80934
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Louis Stermole <stermole@us.ibm.com>
Reviewed-by: ANDRE A MARIN <aamarin@us.ibm.com>
Reviewed-by: Jennifer A Stofer <stofer@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81179
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Initially tried with local checkstop register,
but that register has simics actions which will
clear the set bit0. This was previously incorrectly
setting the wrong bit, but FIR action was executed
and setting bit0. To make things cleaner a new
FIR register was chosen that doesn't have simics
actions associated with it.
Change-Id: Iae2d429b82b8c3eab94db2f46495a1b488347b15
RTC:201738
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80426
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Corey V Swenson <cswenson@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- The HUID value is non-existent in swift xml processing,
this fix will set a valid HUID for each ddimm
Change-Id: Ifbd16b41a1959715324e533e60d39c050c06c2bd
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/81177
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For Enterprise systems that will boot OPAL, hostboot code will now
securely verify the OPAL payload before starting instructions if
secureboot is enabled.
Change-Id: I1c392758f90c4a886d2a7731d78980bdaa21837f
RTC:187304
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80818
Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com>
Reviewed-by: Zachary Clark <zach@ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- MEM_PORT is connected to the OCMB_CHIP target type via
DDR4 BUS connections. Use those to process the MEM_PORT
target type.
Change-Id: Id3d743c54b2e1ed06924ceaee1c1017b18d1cc15
RTC: 211467
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80848
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Hostboot currently spends a significant percentage of
time loading data from PNOR across a relatively slow LPC
bus. This commit enables compilation of Hostboot with
-Os, optimized for space to reduce the amount of data required
to be transferred across the LPC bus
Rough measurements show a ~30% size reduction of the hostboot
image and a ~10% reduction (improvement) in boot time
Change-Id: Ib140e6f07b112ae95a901f49b75416ef91c94a9d
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/79059
Reviewed-by: Nicholas E Bofferding <bofferdn@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Zachary Clark <zach@ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Reviewed-by: William G Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The MRW xml uses chip-PCA9847 whereas we use i2c_mux_pca9847. This
changes creates a thin parent class so that we recognize the MRW
type as ours.
Change-Id: I02b74d1f6af24f35e87591c1b1494c02f730e6a0
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80859
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G Hoffa <wghoffa@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
Reviewed-by: Chen Du <duchen@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a preventive measure to avoid access from the proc to
step on the restore.
Change-Id: I8d190f1cf2d49663ee40caaae56cb3b63e7b5d0c
CQ:SW470208
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80571
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Corey V Swenson <cswenson@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Deserialization pointer was getting double updated. This commit
fixes
Change-Id: I41f38633f057bcda93f0ed35500dce034cf55425
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80777
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
Reviewed-by: Zachary Clark <zach@ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
According to section 6.6 Power management of DCMI spec, the DCMI
Get Power Limit command isn`t supported if Get DCMI Capabilities
Info command indicates no Power Management support. Commit adds
code to get DCMI capabilities information from BMC to check this
Tested on the Vesnin P8 server
Change-Id: I3c4216e2ee4f5fa98ffbcfa95c4af6771f81b43c
RTC: 123256
Resolves #176
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80681
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Martha Broyles <mbroyles@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Adds the necessary code to update the firmware data of the BPM. This
commit doesn't support the config data portion of the update. The BPM
code hasn't been hooked into the existing NVDIMM code yet either. These
things, along with error paths, will be added in future commits.
Change-Id: I11aa8b8afda26a093682765e488a4de0e31c0f6c
RTC:210367
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/79277
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously when adding PVPD support for Axone we we forgot to register
the NODE targets for the EEPROM_CACHE device route. This was causing
the PVPD eeprom to not be cached. This commit registers the device
route and fixes the issue.
Change-Id: Ib530c552eb5c2fed1757f536a400752369de161f
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80559
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Glenn Miles <milesg@ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To support VPD accesses at runtime we had to add support to access
the information in the EECACHE section of pnor during runtime. To
do this we copy the contents of the EECACHE section into reserved
memory during the runtime setup steps of hostboot. Then when HBRT
is loaded we will process that EECACHE section and built up a map
that will allow read/write accesses to the eecache section just
like during the IPL.
Change-Id: I2d08c883e6c09c3194d85abe141c35bb2b76b126
RTC: 204341
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/79985
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Glenn Miles <milesg@ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After we parse the SPD to determine correct frequency settings we
need to check if the optimal settings found differ from the original
settings we booted with. This commit adds a check for OMI frequency
changes in addition to the existing nest frequency and mc sync mode
checks.
Change-Id: Icaf64eda225df3aab82a033866663e3103cef55f
RTC: 207596
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/78739
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
Tested-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Added a factory reset function along with a overridable attribute
(ATTR_FORCE_NVDIMM_RESET) to trigger the reset during boot.
Change-Id: Ib39675e53d693ede897ace0f4432e104dcf8062e
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80293
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Current OpenPOWER code doesn't properly form
the LX VPD record and instead tacks it into the
VINI record. This causes PowerVM to fail to boot.
Correct this by fully forming a LXR0 record, populate
the LX keyword from the value in the system
MRW, and then append the fully formed LXR0 record to
the HDAT VPD.
Change-Id: I2128e4ddef8e3c5c1373fd4c6b5bf6de50901ef1
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/78489
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I806ecadb4c8882ce119a855982f0fc162e6d6659
CQ: SW469979
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80225
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Brian J. Stegmiller <bjs@us.ibm.com>
Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80352
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: Id310de4e82ead523588b1f7674bf0ecb2aa1696c
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80350
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80366
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Encryption requires additional time on certain ops which pushes
the time required close to the timeout value. Double the timeout
values for safety margins.
Change-Id: Idcd147fe613059cb03592d46b36537e882b8e7f2
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80242
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I7c9c7a9d7923f96816e4baf82443855fb64aaa03
CQ:SW469507
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80164
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Need to unlock nvdimm encryption before draminit.
CQ:SW469239
Change-Id: Ib8d228470431082f3450cdeb52cfef1c7cff18dc
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/79873
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Removed extra object inclusion from the PRD runtime code and
added an additional CONFIG_NVDIMM check to the PRD code to avoid
some link errors that we saw when compiling in non-NVDIMM
configurations.
Change-Id: I84f8ce6b4ff0ec007ee0bdd419879683b3414aea
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/79872
Reviewed-by: Caleb N. Palmer <cnpalmer@us.ibm.com>
Reviewed-by: Brian J. Stegmiller <bjs@us.ibm.com>
Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous code used a naked wildcard to grab the fapi attribute
xml files. This can cause local build failures if there are editor
temporary files or anything else non-standard in the same directory.
The makefile was modified to explicitly look for only .xml files.
Change-Id: Iba6434e150b823b74a65ba15084fb18905083de2
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/79550
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Now that MMIO is functional we can enable tests that test writing
with I2C and making sure we read back the same value with MMIO and
vice versa.
Change-Id: I95ac8694117784e6da2a7b38608c9b890d84938e
RTC: 211130
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/79870
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Added code to force using MMIO for doing SCOMs before
running the test.
Change-Id: I57ef764a5e86634224852b8496faec1eca2f1a8c
RTC:211487
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/79486
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I1bac1d632a0d37f7c97ed5b54de28feac7ab5e4e
CQ:SW469679
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/80083
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Dean Sanner <dsanner@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Added a unit test for the firmware request sendAttributes. The unit
test exercises and verifies the correctness of the sendAttribute
firmware request method.
Did some massive cleanup of the testing framework/harness. It was
becoming unwieldy and cumbersome to update. I create methods for the
individual firmware request test instead of having the test reside in
over bloated method.
Added a section, in the README file, on how to test new interfaces
that are added for firmware request lineup.
Change-Id: I0ff7c0e48211b12d81be1f179ad3ee08e4d254af
RTC: 208343
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/78934
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Glenn Miles <milesg@ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Restore with encryption requires longer time and could be hitting timeout value.
Modify the polling condition to allow one extra iteration as buffer.
Change-Id: Ib69774a67062be7d9d57a6880b9a31155a84d11b
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/79876
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If the NVDIMM is not armed when the save/flush call is made during
a mpipl reboot, it will cause errors in the memory. To avoid this
we need HBRT to push down the armed state to the FSP so that HWSV
can skip the save call in the case where the NVDIMM is not armed.
Change-Id: I16611e8fcb5274c3cb0aee6fec1300a95579b11b
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/79825
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I8b0e17cd2f7549b9372fd93feca9bcef4106aa33
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/79631
Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
An eflash will set ATTR_NVDIMM_ENCRYPTION_ENABLE = 0, so only
use HW encryption enabled to decide whether to unlock.
Also need to unlock whenever the nvdimm controller is reset.
Change-Id: I1505573283da5611354dcfb296b1cf488fa8aef9
CQ:SW469014
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/79674
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The function updates ATTR_NVDIMM_ARMED and
ATTR_NV_STATUS_FLAG. These need to be kept up-to-date
during IPL as well as runtime.
Change-Id: If2e8ce9bcc78fb54a0852d3d42753898c199570f
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/79472
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Split the plugin file into a separate file and renamed it to make
it obvious which file (runtime or parser) is which.
Change-Id: I60d1b9cf7e5816e2d03ce56f6529c0b88178c489
CQ: SW469233
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/79762
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The FREQ_MCA_MHZ is being used differently in Axone than previously
in P9 systems. Now this attribute is now tied in a relationship with
the MC_PLL_BUCKET and OMI_PLL_VCO attributes which is defined in the
OMI_PLL_FREQ_LIST in the EKB. Hostboot will use the FREQ_OMI_MHZ,
which was determined from the parsing DDIMM's VPD, to tell if we
have decided that a different PLL bucket than what we booted with
is more optimal. At least one scominit procedure is also looking up
these values. This commit provides that functions that will allow
the Hostboot platform to easily lookup these values.
Change-Id: I8e8d970c682d11a73f9fd1962782b613f55bee48
RTC: 207596
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/78542
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Changed ordring of SRC from in order by subsystems reason,
then by reason code to in order by reason code then by subsystems reason.
This change enable as to easly detect changes when we do diffs between
versions. We end up getting 1 chuck that has changed per SRC, vs a lot
of changes all scattered through the file.
Change-Id: I2d6377078209c324a155c8d29e4f5085e8e68a7b
RTC: Story 210547
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/79525
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The new HDAT spec added a new 'TCG_i2c_TPM' Slave Device Type for the
Host I2C Device Entry Structure. This commit adds the use of it for
Nuvoton 75x support.
Change-Id: I01f75c919f255786e5b32dcde9b86b2e15d33986
RTC:204133
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/79527
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While checking if PN/SN has changed for a given part we will lookup
those PN/SN in the eeprom cache. If we are unable to understand the
contents of the eeprom cache then we want to make sure some sort of
message gets out to the user. This would likely happen in bringup or
lab scenario, and there are other logs generated that would lead you
to this code so this trace should suffice.
Change-Id: Id45c6de42ee6792e8d4bbfdc460da371a5bcb99e
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/78504
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: Ie7edc1f1c9a95647e45508ebd53ad424dc6eb718
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/77798
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Brian J. Stegmiller <bjs@us.ibm.com>
Reviewed-by: Benjamen G. Tyner <ben.tyner@ibm.com>
Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com>
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/79673
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
|