summaryrefslogtreecommitdiffstats
path: root/src/usr/targeting
Commit message (Collapse)AuthorAgeFilesLines
...
* OPAL/MPIPL: Processor Dump Area Table interfacesRaja Das2019-03-212-0/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support to collect processor architected register data. SBE <--> Hostboot : ------------------- During first boot, hostboot reserves memory to copy architected register data by SBE and sends address to each SBE (see commit 9f49d11b). During MPIPL SBE collects architected register data and copies to reserved memory. Hostboot <--> Hypervisor : -------------------------- HDAT/SPIRAH has new ntuple (Processor Dump Area) to pass various architected register data. During IPL/runtime hypervisor reserves memory for architected register data and updates SPIRAH. During MPIPL (istep 14.8), hostboot converts SBE formated architected registers data to HDAT format and copies to hypervisor reserved memory. It uses NACA/SPIRAH pointers to get hypervisor reserved memory details. Hostboot has to update SPIRAH ntuple after loading new LID to memory. Hence this patch introdues below new attributes: - PDA_CAPTURED_THREAD_REG_ARRAY_ADDR - PDA_CAPTURED_THREAD_REG_ARRAY_SIZE - PDA_THREAD_REG_ENTRY_SIZE - PDA_THREAD_REG_STATE_ENTRY_FORMAT Change-Id: Idc7489e8cf6fc68fe80f028ba6deb97aa72486bf CC: Sampa Misra <sampmisr@in.ibm.com> CC: Daniel M. Crowell <dcrowell@us.ibm.com> Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/61627 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Catch Unknown Values for CONFIG_APPLY attributeBill Hoffa2019-03-191-0/+7
| | | | | | | | | | | | | | - If an unknown value is encountered the default value will be used instead Change-Id: I151574914d4e2a72fd4cdca0ca014dd45eab9ac8 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/73256 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add UCD devices to ATTR_I2C_BUS_SPEED_ARRAY for ZZMike Baiocchi2019-03-181-1/+6
| | | | | | | | | | | | | | | | | | This commit adds specific support for the UCD9090 and UCD90120A devices to be added to the ATTR_I2C_BUS_SPEED_ARRAY that Hostboot uses to know which I2C buses have devices on them and what speed thoses buses should be run at. Change-Id: I74c73dc4ed6528eb8937795c105da79101a9f1e3 RTC:205979 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/73505 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Reviewed-by: Matthew Raybuck <matthew.raybuck@ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Set MAX_COMPUTE_NODES attribute so TOD code gets setup correctlyChristian Geddes2019-03-171-0/+4
| | | | | | | | | | | | | | | | | Without this change during istep 18 we hit errors trying to determine correct configs. This attribute was getting defaulted to 0 which got multiplied resulting the software telling us 0 procs were allowed. By setting this to 1 the issue was resolved Change-Id: I78ed0a82036f86daf8de02d14107de86ccbf2d7f Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/73151 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Allow single dimm configurations in AxoneChristian Geddes2019-03-171-1/+1
| | | | | | | | | | | | | | | | | | This attribute was likely copied from Cumulus where single dimm configurations we invalid. In Axone single dimm configurations should be valid. I hit this during bringup when I had the simics scripts configured in a way that was only making a single dimm detectable Change-Id: I13908a18ba22a63fae74c68f2d43221dce0a07f1 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/73194 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Chen Du <duchen@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Support UCD target generation for Zeppelin MRWMatthew Raybuck2019-03-152-27/+198
| | | | | | | | | | | | | | | Update processMrw.pl and Targets.pm to generate UCD targets for Zeppelin Change-Id: Ie7e6513b4072c2d9f4a989914337ec72c018fe6b RTC:201991 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/73072 Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Support UCD discoveryNick Bofferding2019-03-153-1/+48
| | | | | | | | | | | | | | | | | | - Added new attribute to indicate if target should be assumed present - Added that attribute to SP/BMC/UCD targets - Check for assumed present UCDs in discover targets - Iterate through every UCD for data flash update RTC: 201991 Change-Id: Ia535a58ea0355582621a23d3c1b50b2417ad362f Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/73047 Reviewed-by: Matthew Raybuck <matthew.raybuck@ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Dropped messages at shutdownChen Du2019-03-151-34/+95
| | | | | | | | | | | | | | | | | | | Mailbox is needed to send attrs to FSP but it is disabled after a shutdown request, which causes messages to be dropped. Solution is to process messages as normal, but after the shutdown is requested we then ignore all future attr messages Change-Id: I7f3cc4bea66f324ae9ab8dbffe59bf9a7a7edc87 CQ: SW448904 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71012 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Support UCD target generation for ZZ MRWNick Bofferding2019-03-131-3/+109
| | | | | | | | | | | | | | | - Updated Hostboot parser to generate UCD targets for ZZ Change-Id: Iac08aa456d8ba7e429473b196c7fdcdad426ac63 RTC: 201991 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72968 Reviewed-by: Matthew Raybuck <matthew.raybuck@ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add callouts for NVDIMM errorsCorey Swenson2019-03-111-1/+1
| | | | | | | | | | | | | | | | | | - Add part callout for NVDIMM controller - Add part callout for Backup Power Module - Call new procedure for NVDIMM errors Change-Id: I33d14b8e4220ced3c632c8174eaed5faca4f088d RTC:199645 CMVC-Prereq:1077602 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71977 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: TSUNG K. YEUNG <tyeung@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* UCD attribute and targeting updatesMatt Raybuck2019-03-112-1/+113
| | | | | | | | | | | Change-Id: I6e9f237b421f4eadac8c000784548cf5880582bd RTC: 201991 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71891 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Always use original defaults for attribute fields with no valueDan Crowell2019-03-115-29/+34
| | | | | | | | | | | | | | | | | | When a complex attribute is modified to add new fields, it is possible for the system xml to get generated with blank values for the new fields. This value will then get pushed into the final binary instead of a valid default from the metadata xml files. Change-Id: I26d5434c7039d62486b52eb79b395c6dd3d77db7 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/73089 Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Disable Mutex Attribute Test Cases for nowChristian Geddes2019-03-081-2/+5
| | | | | | | | | | | | | | | | | We have been seeing random fails in our CI , there is a story that is looking into this. To avoid useless CI fails we will disable this for now. Change-Id: I19cb4f9ff0dffe0ede6d5d6970608f6c8e5b8067 RTC: 204720 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72916 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Matthew Raybuck <matthew.raybuck@ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Updates to testcases for AxoneDan Crowell2019-03-071-2/+2
| | | | | | | | | | | | | | | | | | Disabling a few testcases temporarily until Axone gets off the ground. Cleaned up some bad traces, etc in existing code. Add CI support for AXONE config Change-Id: I7a2140366e225971c91a50cec1f7e822e4847078 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72186 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
* Base HWP mirroring control on HB policyDean Sanner2019-03-061-0/+5
| | | | | | | | | | | | | | | | | | | PHYP can't support mixed mirroring/non mirroed memory, so MRW mirroring needs to be on/off. HB already has this info in a TARGETING ATTR (but not FAPI) and they don't match meaning one for one. Thus make ATTR writable and replicate FW setting to HWP setting Change-Id: I899272d338947f4c41f93c1ece88028053ce9d5f CQ:SW438826 CQ:SW459005 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64580 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Secure Boot: Log error when attribute override attempted in secure modeLuis Fernandez2019-03-062-0/+25
| | | | | | | | | | | | | | | | | | | | While in secure boot, the first time an attribute override is attempted, an error is logged to let the User know that the override did not take. A flag was created in hb only attributes which tracks if attribute override has been attempted. Change-Id: Ife99e0cfa17934a02abeb291dfd7e06fe86e75e2 RTC: 205071 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72079 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Reviewed-by: Matthew Raybuck <matthew.raybuck@ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Set early test case IPL step to be 14.7 in Axone simicsChristian Geddes2019-03-061-1/+1
| | | | | | | | | | | | | | | Currently in Axone simics we can boot up to exit_cache_contain before failing. Change-Id: I56ca91045c2645d69da5ba9cb18616db2a90706d Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72721 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Delete complextype fields in attributes if they have no valueDan Crowell2019-03-061-0/+10
| | | | | | | | | | | | | | | | | | | The targeting binary build will fail if it sees an attribute with a complex type that has a field with an empty value tag. However if the field isn't present at all, we properly fill in the default value from our xml metadata files. This change will delete any field that is found to have an empty value. Change-Id: I9d9b2b7870bef067d434f4698efac597043db2bf Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72875 Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add interface to look up model type of master processor on targetServiceChristian Geddes2019-03-051-2/+36
| | | | | | | | | | | | | | | | | | While going through IPL flow updates for Axone I realized it would be handy to have a targetService utility function that told us what MODEL we are running hostboot for. This commit introduced the interface TargetService::getProcessorModel() which will return the model of the master processor. Change-Id: Ia4c9a578bc39f08c69946b6fbbcb800707342e7d Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72587 Reviewed-by: Matthew Raybuck <matthew.raybuck@ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Make overrideOnly fapi attributes volatile-zeroDan Crowell2019-03-041-1/+8
| | | | | | | | | | | | | | | | Changing the volatility of platInit+overrideOnly ekb attributes to be volatile-zero so that they don't take up any space in the PNOR. They will only be volatile (current setting) if they have an explicit default value set. Change-Id: Idff90d8d7062a360cc0ac1e0b365e3ea59d50d8f Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72736 Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Secureboot: Enhanced Multinode Comm: TPM_POISONEDIlya Smirnov2019-03-013-0/+27
| | | | | | | | | | | | | | | | | | | This commit introduces a new attribute TPM_POISONED used to indicate that a certain TPM was poisoned during the boot. This attribute is also used to adjust the trustedboot flag in HDAT: if the primary TPM was poisoned during the IPL, the trustedboot setting is turned off in HDAT. Change-Id: I32ff6e79ebba0e38c0e8b4b9bd4aa0f52a250d9a RTC: 203645 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72129 Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Framework for NVDIMM updateMatt Derksen2019-02-281-8/+16
| | | | | | | | | | | | | | | | | This includes framework to update the firmware running on the NV controller. The controller requires 12V power to update, so this function in inside hostboot. Change-Id: I0733d83ff6ba2fc3f026d49c72784b1295bd3eed RTC:201197 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69879 Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Method to execute testcases early in the bootDan Crowell2019-02-283-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | A new CONFIG variable has been created that will trigger the istep dispatcher to start the CXX unit test execution at some point during the boot rather than waiting until the end. This is useful for quick targeted testing and also for early bringup of new platforms. CONFIG_EARLY_TESTCASES is the new flag, and it uses ATTR_EARLY_TESTCASES_ISTEP to determine where in the boot to stop. Changes were required in several testcases to either skip the test completely (typically due to not having enough memory) or to add additional logic to load new support libraries on demand. The Axone platform has this flag enabled by default to execute testcases at the end of istep 6.9 (host_gard). Change-Id: I1da9479e2147d68102f44d60e064c3b79cc41bb6 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71693 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* OpenPOWER support for native and compatibility mode for DD2.3Matt Derksen2019-02-283-1/+80
| | | | | | | | | | | | | | | | | | | | | | | Witherspoon (OpenPOWER) will run in native mode, which means all the processors have to be at the same level (all DD2.2 or all DD2.3). Other systems (ZZ) we support running in a mixed configuration where DD2.3 processors will be run in 2.2 compatibility mode. We also need to support arbitrary OP systems that might want to run in compatibility mode even without mixed parts. See src/usr/hwas/common/README.md for the rules and resulting mode. Change-Id: I80fb98e2687b945ba506f2d75b1533884443e10b RTC:201485 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72214 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* fix VINI RT HW LX keyword for PhypSampa Misra2019-02-211-0/+1
| | | | | | | | | | | Change-Id: I7757b11bdb8643d7f0ea85cc881e00826e5715bb Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/68904 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Jayashankar Padath <jayashankar.padath@in.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add new path in EEPROM device op to allow reading from new EECACHEChristian Geddes2019-02-161-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Recently a new EECACHE section was introduced to Hostboot. This section gets populated with a copy of every PRIMARY_VPD eeprom (someday could contain other eeprom roles also) during host_discover_targets. This commit add support to allow users to select where they want to perform their EEPROM device operation. If they pass CACHE to the deviceOp macro then a read will come from the pnor cache, writes will write to pnor cache and then also write to the eeprom HW. If HARDWARE is passed in then reads and writes will be directly done on the eeprom hardware. If AUTOSELECT is passed the code will check our cache to see if we have a copy of the eeprom in question, if we have a copy we will go the CACHE path, if no copy exists we will go the HARDWARE path. Along with this change some reorganization was done w/ the eeprom related files. RTC: 196805 Change-Id: If2c4e5d3e338a1a10780740c1a019eb4af003b73 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70822 Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Set simics xml to match simics model for OCMB port numberingChristian Geddes2019-02-151-7/+7
| | | | | | | | | | | | | | | | | There was a bug where the i2c controller information had the wrong port values for OCBM targets 2-8. Correct value for the port for these targets is 0. In the current axone simics model OCMB 0 is on port 1 and OCMBs 1-8 are behind a 8-1 mux on port 0. Port was correct for OCMB 0 and 1 but incorrect for 2-8. Change-Id: Id34a812e2f278d0bc90beb44ba26b0fec32d2087 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71700 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add EEPROM caching device opChristian Geddes2019-02-131-34/+174
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit introduces a new EEPROM_CACHE deviceOp and registers the OCMB_CHIP, PROC, and DIMM targets to it. This is part of the larger effort to transition for a "VPD" cache to an "EEPROM" cache in pnor. The deviceOp is currently called in hwasPlat's platPresenceDetect if the target in question has a ATTR_EEPROM_VPD_PRIMARY_INFO associated with it. The layout for the new EECACHE section in pnor is defined in eepromCache_const.H. Essentially it is a header that contains an array of record headers that tell where in the EECACHE pnor section a given cached EEPROM can be found. All EEPROM targets will be allocated space in the EECACHE section but only present targets will have their cache filled in. RTC: 196805 Change-Id: I49c341c9784be04ddf0259bd444f06c9baf8c6f1 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70520 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add call to p9a_ocmb_enable to istep 10.4Christian Geddes2019-02-111-0/+64
| | | | | | | | | | | | | | | | Per IPL Flow doc for P9 Axone, p9a_ocmb_enable needs to be called on all processors during istep 10.4 RTC: 195553 Change-Id: I50fa98959008cccfe0620c8bc6e62f33ee91c135 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71229 Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Correct invalid HUID and chiplet id values for NPU targetsMatt Raybuck2019-02-081-2/+6
| | | | | | | | | | | | | | | | | | There was a bug for NPU targets would incorrectly have a HUID with a value indicating that they were of target type MC instead of target type NPU. This commit corrects that issue and gives the correct chiplet id for NPU targets. Change-Id: I543e80e1c0da7a02bef61f9657270684abc6e7c7 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71159 Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Updates to processMrw.pl to fix erroneous chiplet idsMatt Raybuck2019-02-081-8/+176
| | | | | | | | | | | | | | | | | | In some mrw .xml files there are bugs where the some unit's chiplet ids were set to an incorrect value. This update to processMrw.pl will override whatever value is in that xml and correct it to the appropriate value for hostboot consumption. Change-Id: I88fbeb893bbbbbd6e0a88adea3041df822c6a70d Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70742 Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Fix deconfigure parent rollup policyMatt Derksen2019-01-313-46/+798
| | | | | | | | | | | | | | | | | | | Change to specifically designate if a target is allowed to be deconfigured by child rollup and if it should rollup to its parent. Need to cover the case where there are two different types of children and only one is allowed to rollup to the parent. Also prevent the deconfigure rollup from happening to the parent. Change-Id: I514876a46e9c8180e1fc99a969e0ca4247fbf2d9 CQ:SW454562 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70759 Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Set the I2C MUX bus selector in the i2cPresence functionRoland Veloz2019-01-301-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | - Expanded the i2cPresence API to take in the I2C MUX bus selector and the I2C MUX path. This will facilitate setting the bus selector within the i2cPresence function. - Set the I2C MUX bus selector in the i2cPresence function via the call to i2cAccessMux. - Simplified the i2cAccessMux API. It only takes in what it really uses. - Added several dump utility functions that are strictly there to dump certain data structures on an as needed basis. Was useful to have these utilities to see certain data structures but does not slow down the run time because the user must explicitly call them. - The structures that can get dumped are TARGETING::EepromVpdPrimaryInfo, eeprom_addr_t, TARGETING::FapiI2cControlInfo and I2C::misc_args_t. Change-Id: I14943687a934bfb21bc5cf3db0540b7e629a6257 RTC:203596 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71011 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
* Do not gard cores on the initial core wakeup failureDan Crowell2019-01-292-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | We have seen rare (but non-zero) errors during slave core wakeup where we never see the new core reporting in. Currently this will result in a visible log and a core gard. However, there is currently no indication this failure is actually due to bad hardware. As a workaround, this commit adds an indicator that keeps track of if a core has failed wakeup previously. The first time we encounter the error there will be a visible log with a FW callout and no deconfig or gard of the core. That will trigger a boot failure and a reboot. If we don't fail on the next boot (which is expected), the counter will be cleared. If we do fail again there will be a visible log (with a new SRC) that calls out the core as the primary cause, plus does a deconfig+gard. Change-Id: I3a25537cf9c9c8e0b679519b67e9ae4e3492736d Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70992 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Set TPM model to be the x75 nuvoton for axone simicsChristian Geddes2019-01-241-0/+4
| | | | | | | | | | | | | | | | Current axone simics model has this as the x75. This might change but for now we will set it to be x75 in the hostboot xml so we dont get error logs. Change-Id: I7d86bb36cbb31fd4bae02a7e7f29bc3f385fd6d8 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70827 Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: Hieu C. Nguyen <hieu.nguyen@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Inform PHYP of NVDIMM protection by OCCMatt Derksen2019-01-244-14/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OCC is responsible for detecting the EPOW signal and triggering the save operation on the NVDIMM. Therefore, if the OCC is not running we are unprotected from a poweroff event. PHYP needs to inform the LPARs using the NV (non-volatile) memory of this state so they can behave accordingly. HBRT is responsible for telling PHYP when we get into this state. There are two ways we can detect this state: a) HBRT explicitly puts the PM complex into reset b) PRD detects a specific FIR bit The message should include this data: - what state we are in (protected or unprotected) - which processor is affected Work for this story will include: - Definition of the new message - Creating a utility function to send the message - Calling utility function to send 'unprotected' message inside of all pm reset paths at runtime Change-Id: Ib015d001d47883a247faedabedb0705ba0f1b215 RTC:201181 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/68870 Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: TSUNG K. YEUNG <tyeung@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add Support for Nuvoton 75x Model of TPMsMike Baiocchi2019-01-172-0/+20
| | | | | | | | | | | | | | | | | | This commit adds the ability for hostboot code to support the Nuvoton 75x TPMs along with the current support of the 65x models. A new attribute TPM_MODEL is used to configure the appropriate settings for each model. Change-Id: I14b0f6606a1a94d0ed300fd51bbf3f50e63dfb01 RTC:202356 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70464 Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Set the DIMM SPD sizeRoland Veloz2019-01-162-1/+18
| | | | | | | | | | | | | | | | | | | | - Created attribute DIMM_SPD_BYTE_SIZE to contain the DIMM SPD size - Added the attribute DIMM_SPD_BYTE_SIZE to target lcard-dimm so that all DIMMs get this attribute - Enumerated the sizes of DDR3, DDR4 and DDR5 for easy access and easy updates if necessary. - Added code in spd.C to set the size of the DIMM at presence detect Change-Id: Ia08fd41ef93f54f7f695c92e346e92bda8cd6d64 RTC: 202746 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70008 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Replace attribute I2C_MUX_INFO with attribute FAPI_I2C_CONTROL_INFORoland Veloz2019-01-155-106/+5
| | | | | | | | | | | | | | | -- Just removed all instances of I2C_MUX_INFO and replaced with FAPI_I2C_CONTROL_INFO if not already there. Change-Id: Ie161abb25ef75b632d6c429fb247ccbd04eb2135 RTC: 203024 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70022 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Fix EEPROM_VPD_PRIMARY_INFO attribute on proc targ in axone sim XMLChristian Geddes2019-01-141-4/+8
| | | | | | | | | | | | | | | | | | | | | | Up until this point in P9 systems this attribute has had the maxMemorySizeKB = 0x80 (128 KB) and the chipCount = 0x02. While this is partially true, hostboot should never access the 2nd 64 KB chip. The MVPD is completely stored in the first 64 KB chip. This commit intentionally does not fix previous system XMLs but it might be worth investigating. MRW is still supplying the old 0x80, 0x02 values for Nimbus/Cumuls system so it was decided to leave old values in our sim xmls for those systems. RTC: 196805 Change-Id: Ibec7412359b6cda24a255ec612a5774a7ed3ac30 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70259 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* HTMGT: Clear OCC reset counts after an hourChris Cain2019-01-142-36/+36
| | | | | | | | | | | | | | | | | | - add HTMGT/OCC data to elogs - parse HTMGT/OCC data in elogs - add reset count per OCC since last boot - remove unused legacy pstate attributes/code Change-Id: I69f9fe504af13eae86ec423a329a7bc46286f906 RTC: 202016 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69717 Reviewed-by: Martha Broyles <mbroyles@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Sheldon Bailey <baileysh@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* No parent rollup for OBUS childrenMatt Derksen2019-01-112-3/+13
| | | | | | | | | | | | | | | HWSV code is deconfiguring either SMPGROUP or OBUS_BRICKS under the OBUS. Need to prevent the deconfigures from also deconfiguring the parent OBUS. Change-Id: Ibca2766009b63582fcfa537139a078bef3a58f47 CQ:SW454103 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70322 Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add presence detection for i2c mux targetsChristian Geddes2019-01-112-0/+12
| | | | | | | | | | | | | | | | | | | | | | | This commit removes the ddimm.C file that had the deviceFramework routing for OCMB presence detection and replaces it with a new file in src/usr/i2c/i2cTargetPres.C that is more generic for any target that has the FAPI_I2C_CONTROLLER_INFO attribute. The i2c_mux target also now uses this same code for its presence detection. As a result of this change the src/usr/i2c/mux_i2c.* files have also been removed. When getting rid of the ddimm.C file I had to put the IDEC device routing somewhere else so I moved it to the hwasPlat code where the other IDEC device routes are registered. RTC: 196805 Change-Id: I27e5e3e8d0fe107c3d44a450e20efa6f50fa0c5f Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69944 Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Updates to processMrw to fix Chiplet IdsMatt Raybuck2019-01-091-1/+11
| | | | | | | | | | | | | | | Update the process functions to correctly determine the appropriate chiplet id and set it for each target. Change-Id: Ice68d9424a8a3a3f2ef64e9c6a303ee289aa2768 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70118 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Move NVDIMM Erase and Arm to RuntimeTsung Yeung2019-01-091-0/+45
| | | | | | | | | | | -Move erase and arm to after OCC has started -Address several TODOs in I2d68123ceb0b8e7a33b54f9acad0968670a67ea9 -Combine arm and erase into an atomic operation with ATOMIC_SAVE_AND_ERASE Change-Id: Iad06f6fe7128df3defc4ded57b0151f9c4b9d15e Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/68197 Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Tested-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Real OCMB presence detection support for Axone simicsChristian Geddes2019-01-082-17/+358
| | | | | | | | | | | | | | Previously a hacked up copy of OCMB presence detection that always returned that the OCMB was present. This commit will actually look up the VPD to determine if the OCMB is present or not. Change-Id: Id8c51587b9e5c63dfd68d2463f24aa419426d9ab Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69905 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Deconfigure parent if no more functioning children of child's typeMatt Derksen2019-01-081-1/+5
| | | | | | | | | | | | | | | | | | Defect discovered that a DIMM deconfig did not rollup to the membuf because the membuf also has an l4_centaur child. The fix is to check that the parent has no more children like the one being deconfigured. Also make sure that deconfiguring l4_centaur does not deconfigure its parent membuf. Change-Id: Ic499092d0da926dcd3e0c08f5205e491e04f9680 CQ:SW451955 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70093 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add ATTR_REL_POS to NIMBUS system xmlMatt Derksen2019-01-051-1/+185
| | | | | | | | | | | | | | ATTR_EFF_HYBRID and ATTR_EFF_HYBRID_MEMORY_TYPE use ATTR_REL_POS of dimms and mcas as index values. Need this update to avoid using default 0xFF value as an index. Change-Id: I71741bf4e0bd183fe65e1d14b1a53017df7053b6 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70056 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* HB Axone simics model changes to support DDIMM SPD i2c accessRoland Veloz2018-12-183-8/+232
| | | | | | | | | | | | | | | | | | | | --- Added an I2C MUX target at engine 3, port 0, device address 0xE0 --- Added EEPROM_VPD_PRIMARY_INFO data to the DIMMs. This info also includes the I2C MUX target details to get to the MUX. EEPROM_VPD_PRIMARY_INFO fields: * byteAddrOffset set to 0x00 * chipCount set to 0x01 * maxMemorySizeKB set to 0x4000 (4 KB) * writeCycleTime set to 0x05 (5 ms) * writePageSize set to 0x20 --- Updated the I2C_BUS_SPEED_ARRAY attribute for target sys0node0proc0. Added speed 400 to array that corresponds to engine 3, port 0. Change-Id: Ia1965803a12f08e816b19d9d9a6fe2dfe3a2df36 RTC: 202358 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69835 Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: Christian R. Geddes <crgeddes@us.ibm.com>
* Fill in remaining dimms for simics_AXONE.system.xmlChristian Geddes2018-12-181-7/+247
| | | | | | | | | | | | | | | | | | Initial DIMM xmls was taken from cumulus where we skipped dimms due to memory pair testing. In axone it makes more sense to have use dimms 0-8 instead of 0,2,4,..14 Change-Id: I9d3c85e96415c0a7908c859697891da703ea8e9d Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69902 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
OpenPOWER on IntegriCloud