| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Simics provided an AVS bus fix so this
call should now pass. Previously failed
for bad CRC (computed 7, received 0)
Change-Id: I74a15263244aa66158bf33e68eceddcb439edd15
RTC:209750
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/78244
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Glenn Miles <milesg@ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add pmic_enable to istep 8.12 host_set_voltages.
Change-Id: I67079281fd72c2c651db069479882dd7c9e4587c
RTC:209259
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/77402
Reviewed-by: Glenn Miles <milesg@ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently there is no VRM hooked up to the other side of the AVSbus
in simics. The simics team is working on this but for now we need
to skip the istep that calls setup evid to set voltages. This can
be removed when Simics gets this working. Also for now we are will
skip starting checkstop handling early on in the IPL because the
OCC model is not finished. This also can be changed when the model
starts working.
Change-Id: Ia0df49fedae97acceefe07e3f3c903bbe6aac83d
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71097
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Need to let ATTN know that they need to start monitoring non-primary
processors and centaurs after we determine they are functional.
Change-Id: Ia33ddc87a94c0ca972accb2d6078c2f9f2e7bd2c
CQ: SW446697
CMVC-Prereq: 1070543
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66717
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is done in order to avoid an error if the PPE code
isn't loaded when we attempt to start the PPE.
CQ:SW446328
Change-Id: I32f5ae0c617cf4d29dd6a6744158febe7b05e9da
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66885
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Structure sbeCapabilities_t was added to the sbe_utils.H, a common file that
can be shared among other files that need the sbeCapabilities_t struct.
The psuCommand structure was updated, in file sbe_psudd.H, to facilitate the
PSU call to get SBE Capabilities. Also structs fifoGetCapabilitiesResponse/
fifoGetCapabilitiesRequest were added to file sbe_fifodd to facilitate
the FIFO call to get SBE Capabilities.
Attributes SBE_COMMIT_ID, SBE_VERSION_INFO and SBE_RELEASE_TAGS were added to
the target '<id>chip-processor</id>'. These attributes are the ultimate
receiver of the SBE capabilities' version, commit id and release tags info.
New file sbe_capabilities.C contains the call to getPsuSbeCapabilities and
getFifoSbeCapabilities which ultimately perform the call to do the PSU chip
operation, FIFO chip operation and update the attributes above. In step 6,
host_discover_targets, and in step 8,
call_proc_check_slave_sbe_seeprom_complete, is where the calls to
getPsuSbeCapabilities and getFifoSbeCapabilities are made respectively.
The file FipS_SBE_Interface_Specification_v1.3a.pdf (FIFO), file
Host_SBE_Interface_Specification_v0.9d.pdf and looking at
HW code were used to guide the coding of this.
Change-Id: I32ccdeab7bf0a478298b199d42d74650a3f393f6
RTC:181139
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56317
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The current code enables PRD/Attention Handling on the slave
processors as soon as we get the SBE started (clocks running).
This is a problem because most of the FIR regs are blacklisted
such that we cannot write them until after the SMP is up and
we are using xscom. This restriction will lead to an infinite
loop in PRD if we get a recoverable attention on the slave proc.
The fix is to defer all of the attention handling on the slave
procs until after the SMP is up. We will move the enabled from
istep 8.5 host_attnlisten_proc to the end of istep 10.1
proc_build_smp. Note that this makes 8.5 a complete NOOP.
Change-Id: I1b6542efe2cd14717d7fa55d01327121027c6862
CQ: SW429438
Backport: yes
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/59268
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com>
Reviewed-by: Dean Sanner <dsanner@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
During Hostboot IPL time it is impossible to see OBUS peers because
they exists on different nodes and Hostboot is unaware of other nodes.
Because of this we must mask off additional OBUS related firs during
Hostboot IPL time. After we have reached runtime and have re-adjusted
PEER targets we can restore the FIR values to what they were prior
to the additional masking Hostboot does during IPL time.
Change-Id: Ib9c158191c7f68f4bd7126799ba0a0aba40cee18
CQ: SW425530
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/58916
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I347075dd2424ee8b96805456b3d7d9962f428b64
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/58347
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Adding support, in Istep 08 to make HWP calls for many various
components. In the various istep 8 call_proc_* and istep 10
call_proc*, I was able to consolidate the HWP call into a single
single function. The consolidated code for these calls exists
in the file nest/nestHwpHelperFuncs. Also added a function to
capture errors in file isteps/istepHelperFuncs.
Change-Id: I64f73d64950a52d2923f1c3fe280c55dffd1d742
RTC:190096
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56518
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If we fail to boot the slave SBE we should mark it in the istep
errlog to ensure that we fail the istep and perform a reconfig
loop.
Change-Id: I70e67b5b3e1e35e0ee76eb1f158435ee44a436ef
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56882
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously the sbe_retry_handler had logic and wording that
assumed that it was being used to tell if the slave sbe booted or not.
However this code has many more use cases then that. Also there was some
indirect recursion that made the code hard to follow. With this refactor
the code should be easier to follow and the vocabulary used should be more
generic.
Change-Id: If6520197b3dd561857e336ed89d9356c1f2601d6
CQ: SW416106
RTC: 167191
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/55896
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
Tested-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously in P8 when running the xbus scominit hwp we needed to
include duplicate connections IE xbus0->xbus1 and xbus1->xbus0 when
we look up what to run the xbus scominit hwp on. In p9 the HWP will
initialize both ends of the xbus connection when we pass both ends
into the xbus scominit hardware procedure
Change-Id: I5a0a356e2086b15ee5d25cf350c9a0559ec2084b
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/54726
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This was a temporary workaround that needed to be removed
CMVC-Prereq: 1041146
Change-Id: I0a16bffab8ebd576ca5f21f748874a11ee90ae84
RTC: 174563
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/46094
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Stephen M. Cprek <smcprek@us.ibm.com>
Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- This will still be called in istep 10.3 as well for now
until the FSP dependencies can be removed
Change-Id: I8df3b65f6ca62ffc810619d289b68f1cd938cc37
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/50956
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If there is an error in the PSU, and there is no FFDC, there is
probably something wrong with the SBE. Since there is new support
to attempt an SBE reboot if there's an error, we want to add that
functionality to the PSU flow as well.
Change-Id: I8203193b49caaf640962e181a814df83c0760ff4
RTC:178801
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/46641
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit takes care of a few things
1) Removing the sbe threshold handler - we decided
that retrying after the initial loop was overkill
2) Making use of the class structure - we added a lot
of class elements to decrease things passed
between functions and to facilitate debugging
3) Creating a main entry point and simplifying functions
We decided that we wanted one function to handle all
actions. This also made some function irrelevant and
as such they were removed. Additionally, this also
fixes an infinite circular logic bug.
Change-Id: I9556e3181226755150c3debd1471f1be23e13be4
RTC:180961
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/49886
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I9c71969486d8160caa6e675ea91ba9aed5e088a9
RTC:180961
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/49109
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit restructures the sbe_extract_rc_handler code into
its own class.
Change-Id: Ib6ecb1a67353b060a6578b13da951b276bc93ca7
RTC:180961
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/48511
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Introduces Centaur ring ID header files and ring_apply support to generate
a separate Centaur ring image file.
- Introduces common ring ID header file consumed by both P9 and Centaur and
all user codes, e.g. putRing, ipl_build, xip_tool, etc.
- Introduces a namespace approach for complete separation of P9 and Centaur
ring data and to facilitate execution time selection of either P9 and
Centaur ring data.
- Added Centaur image .rings generation function to p9_ring_apply.
- This commit does NOT support Centaur in the TOR API nor in xip_tool. See
commit 38018 for that support.
- Modified hw_image.mk file to support Centaur XIP image generation.
- Updated ring_apply to also support .overrides ring gen for Centaur.
Change-Id: I12a27b194dc14d906fea7bc273eb9f766f0fc5bf
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/35639
Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Sumit Kumar <sumit_kumar@in.ibm.com>
Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com>
Reviewed-by: Richard J. Knight <rjknight@us.ibm.com>
Reviewed-by: Thi N. Tran <thi@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com>
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/36011
Reviewed-by: Hostboot Team <hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I15438b21692f45899efb75afcc1db31f9caece15
RTC:178801
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/46843
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Set slave processors to use FSI SCOM until SBE is running, then
switch to using SBE SCOM. Re-enable calls that were blocked
because they would attempt an SBE SCOM before the slave SBE was
running, and so, would fail.
Change-Id: I4d3e93ac6e53a6073584043c6adc7ecf32a4714b
RTC: 177921
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/45063
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Elizabeth K. Liner <eliner@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
SBE failure paths in call_proc_check_slave_sbe_seeprom_complete.C need to be
updated to check the async FFDC bit after returning from the timout handler
and detecting that the SBE is not in the RUNNING state. If the async FFDC bit
is set, get and handle the SBE FFDC.
Change-Id: Idd35ed975affbdd27a1ca5074a1416fd80d3b875
RTC: 178346
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/44973
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: Elizabeth K. Liner <eliner@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
SBE failure paths in sbe_extract_rc_handler.C need to be updated.
- Add support for getting out of the timeout loop if the SBE state is
changed to DUMPING or if the async FFDC bit is set in the SBE register.
- Add support to check the async FFDC bit after returning from the
timout handler and detecting that the SBE is not in the RUNNING state.
If the async FFDC bit is set, get and handle the SBE FFDC.
Change-Id: I460a6dd81f8bbce8e92dcc19f68ec8489f38c19c
RTC: 178347
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/44827
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Elizabeth K. Liner <eliner@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: Sachin Gupta <sgupta2m@in.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
A recent workaround added a double commit for an error log.
Change-Id: I218500576e8b5f7af232e8311f2657e2717b1bf2
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/44623
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The changes that just went in to enable recovery from non-fatal
SBE issues have had an unintended consequence of making live
debug of SBE failures much more difficult. This change will
temporarily disable the code path until we put in a real
solution that works for live and automated scenarios.
Change-Id: I17b06ec8aaa8f593af2671bccb55554380a28ea8
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/44026
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Sachin Gupta <sgupta2m@in.ibm.com>
Reviewed-by: Elizabeth K. Liner <eliner@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fixed a race condition in clearing out the PSU interrupt
register that existed between the INTR and SBEIO code.
We can sometimes lose interrupts for SBE PSU operations
which leads to a timeout.
Also added code to look for SBE errors if a PSU
operation times out
Change-Id: I8cdcdcc08956b038bcc65ad7e00a34719bf14c61
CQ: SW396057
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/43339
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Elizabeth K. Liner <eliner@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit adds in an additional hwp needed for the SBE conditions
handling, p9_get_sbe_msg_register. This HWP pulls out the SBE
register and determines if it got to runtime or not. From there
there are handler functions that decide what to do next.
Change-Id: I0e17b345bb983ed6373ec36ea2a6eb9b5e1bf3f1
RTC:173809
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/41503
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commits sets up the specific details for every function
included in the finite state machine. Basically, it calls
a retry of the SBE if applicable, and then handles the error
or pass for what it needs to do next. In the end, we either
pass with a working SBE or we fail, gard out the proc and continue.
Change-Id: I298e43e85bfd4f0591aefe289d6792f001fb24b2
RTC:173809
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/41075
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit finalizes the different steps for each SBE condition,
whether that's trying again, increasing the error to a more
serious condition, or failing and garding the proc. In most
instances we attempt to restart the SBE through the threshold handler.
Change-Id: I1bd485557f6999a20a1a52c92f06be3df528ca8c
RTC:173809
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/41074
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit sets up the basic structure for the SBE extract
return code handler from the HWP. It sets up attributes,
error codes, the inital call to the function, the different
paths for the sbe conditions and the basic finite state machine
structure for the threshold handling.
Change-Id: I47a07226da0d3e5a45606a496795636511d621a8
RTC:173809
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/41073
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: Ic9b220dc3480c13e1b1ac1c69a0be148ab5ea977
RTC:163094
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/41114
Reviewed-by: Stephen M. Cprek <smcprek@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Marshall J. Wilks <mjwilks@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
p9_chiplet_scominit, move from istep 8 to istep 10
shift content required for XBUS, fabric establishment
into p9_chiplet_fabric_scominit, to be called in istep 8
p9_chiplet_enable_ridi, move from istep 8 to istep 10
shift content required for XBUS establishment
into p9_xbus_enable_ridi, to be called in istep
CMVC-Coreq: 1023401
Change-Id: I4c60e4c41211976c7919a603ab679357cc4af106
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/39956
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Reviewed-by: Brent Wieman <bwieman@us.ibm.com>
Dev-Ready: Brent Wieman <bwieman@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com>
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/39960
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
| |
RTC: 168620
Change-Id: If1e099411f5b5b12be1a3832ad818c2019f4dadb
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/39432
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Added new mailbox scratch reg 3 bit 6 for security override
- Trace propagation of this bit across the chips
Change-Id: Ib353a1856dc68566cb090163fab532d7a4607073
RTC: 170650
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/39527
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Stephen M. Cprek <smcprek@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I3aee218a8c482877b3595ced9721919da28d711f
CQ:SW384841
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/39067
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I2d0a8b6cfef172304ec4d873c263208286c10f52
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/37556
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I7d84e2bef86ec17acc722f4ec9c9c19341d29ac8
RTC:160422
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/37640
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After we collect the ECID from the processor we will apply the
MINI_EC value that was computed to HDAT_EC so that PHYP can
see it later.
Change-Id: I771d2ba8e2e6b521b50e8ac7e824651d126b3c83
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/37912
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Base SBE boot side for slave processor off SB keyword in MVPD rather
than off boot side used by master processor.
Change-Id: I3165d536f104c0d1f394de93a390bd0f722e4777
CQ: SW383676
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/38152
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Richard J. Knight <rjknight@us.ibm.com>
Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I4f746bd54b7fc501756e65b0201dcac863e70a44
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/37559
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
| |
RTC:167304
Change-Id: I1be23aa1e52faf91dae495b33d94c794e2035249
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/37876
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The HB Bootloader now owns the responsibility of selecting the
appropriate side of PNOR to use when loading the HBB image. There
is no longer a HBB pointer in the SBE image itself. This commit
removes the code that dealt with that support. There is also
some cleaning up of a few other related functions.
Change-Id: I35bfccb3590f81867d8222333cb4be66718828fa
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/36358
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
More data to help debug SW380025
Change-Id: I4bcbf546e538c84e601d1719700d55654b90095d
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/36808
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
RTC:167302
Change-Id: Ie8bc04f0643cf196edd17d4cb7575236a9c3fd51
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/35055
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I31ea76f8cd28c77e64c9437d8e0bd9a40f09f7d4
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/31498
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com>
Reviewed-by: Gary A. Peterson <garyp@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com>
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/31501
Reviewed-by: Hostboot Team <hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I440d6f5bd6aa1c3c72b3d8df581262b01765214c
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/35447
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Long-term fix to get boot side before SBE is started
Code can attempt to get the boot side for an SBE before the SBE is
started and the SCOM can be read. In this case the boot side for the
master processor should be used. Second step of this fix is to
read the SCOM for the master processor target when finding the boot
side of the master processor SBE or a slave processor SBE that is not
started and read the SCOM for the slave processor target only after
its SBE is started. A new processor target attribute will be set
after the processor's SBE has been started.
Change-Id: I12f97435f8872e41f06dcff6120abe4c24a1bb22
CQ: SW378865
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/35938
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Increasing the timeout for the slave SBE to be ready by 10x for
Simics.
Change-Id: I9d10372d060f6fa83063330e22110bad88a8272a
CQ: SW378197
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/35615
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: Sachin Gupta <sgupta2m@in.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Setup PROC_PCIE_REFCLOCK_ENABLE and PROC_PCIE_PCS_SYSTEM_CNTL
- Update missing PCIE attribute settings in XML
Change-Id: Iac6e74812e6875ad4513cba0eff0c2d664a81241
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/34543
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
|