| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the Resource Recovery redesign, the Block Spec Deconfig attribute gets set
when a check for minimal hardware fails to find enough hardware, and it gets
cleared when there is a hardware change. Now, the Block Spec Deconfig attribute
will also be cleared when a target that had gard applied no longer has any gard
records.
Change-Id: I8f93ca4821b1360638a94855c0aadb3dda365046
CQ: SW429890
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/59325
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Brian E. Bakke <bbakke@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Thi N. Tran <thi@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit adds a new custom Node Comm Device Driver error log
user details section and its parser code. It also adds a function
to add the target and important HW registers to an error log.
Change-Id: I11893af06b7a097b43106117d648e9a431c4f3ea
RTC:191008
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/59079
Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit establishes base support for Secure Node Communications.
It creates a new device driver to operate the XBUS and ABUS Link
Mailboxes and adds base support for using these device drivers to
send and receive messages. It also adds a test to perform a 2-chip
XBUS Link Mailbox operation.
Change-Id: I19510888c0922e5bb857cffc9426399e79e113ba
RTC:191008
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/58376
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com>
Reviewed-by: Marshall J. Wilks <mjwilks@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To support Fleetwood secure inter-node communication, we need to
“poison” the PCRs of all still functional non-master node TPMs
just prior to transferring control to PHyp, and report that
poisoned state to HDAT.
Change-Id: Ic104ef2e44fc98895b9b435fdf8ba4c5e4972818
RTC:191001
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/58244
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The SMP_CABLE part callout will be used to indicate to the FSP
that a SMP cable is at fault. The FSP code will do further
analysis, possibly adding more FFDC to the error log or triggering
recovery code.
Change-Id: Ib7463e5e21c1a9aa75e6a6121e31d742293ef928
RTC: 180336
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/59132
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Sachin Gupta <sgupta2m@in.ibm.com>
Reviewed-by: Srikantha S. Meesala <srikantha@in.ibm.com>
Disable-CI: Srikantha S. Meesala <srikantha@in.ibm.com>
Reviewed-by: Benjamin J. Weisenbeck <bweisenb@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
-On a multi node Fleetwood system with node0 deconfigured
the index into the hostboot reserved memory array for the
master node exceeds the limit check due to an invalid
calculation when nodes other than 0 become the master.
The calculation was using the node id instead of the
effective instance id.
Change-Id: I55d991eda04452aa242fcccad07fede05d29eccb
CQ:SW425720
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/58113
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Adding some more traces to the error log we grab for core
activation failures.
Change-Id: I30c6985060fcffcb3382b775a52e59c08d2b51b7
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57907
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Resolves #135
Change-Id: I46b5c2208ed28822c6001a955f4056d976e79339
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/58010
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit adds an option to the two masterProcChipTargetHandle()
functions to only look for and return a functional master proc chip
as necessary with the issue in Defect SW424528. The default behavior
of these functions - where the functionality is not checked - remains
the same. Once use of these functions has also been updated to use
this new option.
Change-Id: I37049d2cb9299a9404b57d85031a364bdb257c82
CQ:SW424528
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/58920
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: Marshall J. Wilks <mjwilks@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Sachin Gupta <sgupta2m@in.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
-Existing code ensures consistency of frequency data
across all modules in istep6.12.
-In a multi-drawer config this data needs to be consistent
across all drawers.
-Master drawer sends the frequency data to all the other
via IPC mechanism.
-This data is compared and error is returned if there is a mismatch.
Change-Id: Ia1daf1f0eeb90fbafb68417b979488b040efe535
RTC:158036
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57542
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Resource recovery is a RAS feature wherein we do not apply certain gard records
if those records would result in a boot fail due to a lack of hardware. Change
the logic from applying speculative deconfiguration one by one to applying all
predictive gard records and then removing those records if minimal hardware is
not available. Also add BLOCK_SPEC_DECONFIG attribute to flag when speculative
deconfiguration is not allowed. This flag is set if minimum hardware is not
available and is cleared after a hardware change.
Change-Id: Ia065de3a44ab29fbf33ad4ce98bc42ea5144463f
RTC: 191414
CQ: SW424137
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/58041
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Added flag to force a HB dump for most VFS crashes.
Also added a few constants in the ErrlEntry constructor to make
the bool args more obvious.
Change-Id: I4f90ee694cece10f567df787f851dca78a895ad7
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57272
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The existing key transition flow updates all SBE SEEPROMs within the system in
the same boot, thereby quiescing all SBEs. This compromises the ability of FSP
to detect a key transition TI at the end of the update process because the SBE
is not alive to service FSP's incoming SBE FIFO request to read the memory
holding the attention information. This change adds new support to log
the key transition progress in a node target attribute introduced in an
earlier commit and send that status to FSP via a new mailbox message.
Change-Id: I828184ae8be89ac87137d7510a3c375cef2e05d7
CQ: SW418697
CMVC-Prereq: 1053806
CMVC-Prereq: 1053552
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56677
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Reviewed-by: Marshall J. Wilks <mjwilks@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A new programming interface allows us to obtain random numbers
from the TPM more easily (i.e. in a more high-level way).
Change-Id: Ibd3d3b320411bea146d6eab4d1a59ca760bc726c
RTC:191000
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57802
Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit retrieves the amount of space the PAYLOAD has reserved
for the HDAT content in its SPIRA section. It then uses this size
when copying the HDAT from the temporary location (where the FSP
put it with DMAs-via-TCEs) to its final location.
Change-Id: I430a78a1655db85f448b3f5c30e6a83f5be4b1f6
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/58261
Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change implements a Centaur SCOM cache for sensitive SCOM registers. The
cache is initialized and enabled before the first Centaur SCOM, and disabled
just prior to locking down the Centaur configuration. Once the Centaur has been
locked down, the real register values are compared to the cache entries, and the
Centaur is deconfigured (not garded) on any mismatch in assumptions.
RTC: 187288
Change-Id: I7b13bfd7eb6b427aba115d6944958bf55e171008
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57532
Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
I think this is all that's required to define the SCOM interface
to FSP. I used a single structure for request/response because
I want to use the generic FSP messaging code, and it assumes that
the request and response structs are the same (at least in size).
Change-Id: I45d3678db1e265cc1ba5108ea6ffbbe9a15bc307
RTC:189294
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57807
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Alpana Kumari <alpankum@in.ibm.com>
Reviewed-by: Sachin Gupta <sgupta2m@in.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit introduces a new error log that will get displayed
when a slave SBE fails to reach runtime after the intial start_cbs.
Before adding this there was no notification letting the user know
that Hostboot failed to boot the slave sbe and that it gave control
to the FSP so hwsv can figure out what to do next. In addition to
this new error log this commit also updates other errlCommit func
calls in the sbe_retry_handler to ensure we are using SBEIO as the
component id for these error logs.
Change-Id: I73854f753a6186958d55909e8e37a605c1ad57c9
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/58049
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: Brian E. Bakke <bbakke@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I347075dd2424ee8b96805456b3d7d9962f428b64
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/58347
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Continuing the support, in IStep 09 to make the call to
p9_io_obus_linktrain and p9_io_obus_post_trainadv.
Change-Id: I3d070bfc6c55224b77b6342362d5d008d0f0a61b
RTC:190096
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56886
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
Disable-CI: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Adding support, in Istep 08 to make HWP calls for many various
components. In the various istep 8 call_proc_* and istep 10
call_proc*, I was able to consolidate the HWP call into a single
single function. The consolidated code for these calls exists
in the file nest/nestHwpHelperFuncs. Also added a function to
capture errors in file isteps/istepHelperFuncs.
Change-Id: I64f73d64950a52d2923f1c3fe280c55dffd1d742
RTC:190096
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56518
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It's possible that some targets that use I2C to detect if they are
present might not be present after a system re-IPLs and performs a
FSI I2C Reset. Therefore, later in the IPL, after a Host I2C Reset
sequence an attempt to rediscover any of these targets is made.
If any new targets are found, the system will re-IPL. Currently
only supporting looking for DIMMs now on OpenPower systems with
securemode enabled.
Change-Id: I010135231f2f74869529a3dbc3344413b6d19dc9
RTC:178973
Backport:release-op920
CQ:SW427365
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57744
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change the "TPM Required" policy to "Primary TPM Required," wherein
only the presence and functionality of the primary TPM (attached to
the acting master proc) will be considered when evaluating the
TPM required condition. The presence and functionality of the backup
TPM will not play a role in this policy.
Change-Id: Id968123d0fc399c531da7429fdb8efabfa66c53c
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57843
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change implements the detection and initialization of the backup
TPM in istep 10.14. The backup TPM is presence-detected and initialized;
the logs of the primary TPM are extended into the secondary TPM in istep
10.14. After the initialization of the secondary TPM, all events are
extended into both TPMs. A test was created to test whether the backup
TPM is initialized correctly.
Change-Id: I305500c9f680115e684ab153fc882b8d5364b0d4
RTC: 134912
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57374
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Attribute Overrides from FAPI tank are ignored as the Target Type
is defaulted in the call tree and thus Attributes for FAPI
Targets are never extracted.
Add a error log if FAPI Attributes are ingested so there
is an indication that these are not supported rather than
throwing them silently on the floor.
Change-Id: I595e07b03df4d093d7f91b0a8513a8d94c9844dc
RTC:177224
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57683
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Brian E. Bakke <bbakke@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When console traces are enabled, the boot takes significantly
longer than usual. Our standard watchdog timeout of 2 minutes
is not sufficient.
Made the following changes:
- Tied the enablement of the long timeout to the CONFIG flags for
console traces
- Increased the timeout to 1 hour (from 40 minutes) since this is
lab only and false positives are the worst...
- Added a couple clarifying traces to make future watchdog debug
simpler
Change-Id: I92bb0b07cb77a13cb390450999b285f2ad74168d
CQ: SW425407
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57580
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: Richard J. Knight <rjknight@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Due to fabric limitations, we can only have 2 OBUSes
enabled at a time. This commit deconfigures the OBUSes
that do not belong the set of links to enable in
this boot based on attributes.
Change-Id: I15f5e9f3ea186367b9c4d55f4dc2e9b32b251f6d
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57836
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Elizabeth K. Liner <eliner@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In case of OPAL system MDST and MDDT contains entries from multiple sources
(OPAL, kernel, etc,). Post MPIPL OPAL needs a way to differentiate between
them. Hence copy type field from MDST table to MDRT table.
Change-Id: I3f196cdc58e7376d7743188d0a6b76c99799b5ad
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/55187
CI-Ready: RAJA DAS <rajadas2@in.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
CI-Ready: Sachin Gupta <sgupta2m@in.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
OPAL relocates itself after boot. During MPIPL, hostboot needs to access
relocated SPIRAH. Hence lets add support to get relocated payload base address.
OPAL will use SBE stash chip-op to send relocated address to SBE. During early
IPL SBE sends stashed data to hostboot. And hostboot will use that information
to find relocated payload (OPAL) base.
SBE stash chip op:
key = 0x03
val = <relocated payload base address>
Change-Id: I1089bd38f32b01b877d1580ba76313fc250e5c08
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/55190
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Allow the RC of a HWP to be returned along with the associated
error log. This allows logic to be based on the specific RC if
needed.
Change-Id: I90a78ace2cc4263265940764dffd0691dd56e2f5
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57302
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Caleb N. Palmer <cnpalmer@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When proc0 doesn't have memory, and we are on a phyp system, we
don't need to swap our master proc and we can instead just swap
memory. This commit adds in the functionality to look for working
memory, and send both the group and chip ID down to HWSV.
Change-Id: I664d5bfcd308a4ba2ee71e3e708533c6ec9a0a71
RTC:176434
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/54403
CI-Ready: Elizabeth K. Liner <eliner@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
CI-Ready: Sachin Gupta <sgupta2m@in.ibm.com>
Reviewed-by: Sachin Gupta <sgupta2m@in.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A new XML file with list of attributes need not be synced is
accepted by the script. The attributes in the list is excluded
from the output XML processed to create system model tables.
Change-Id: If1d3a02d574988ce5e0fa503bab2fd0e4accdb8d
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56636
CI-Ready: DHRUVARAJ SUBHASH CHANDRAN <dhruvaraj@in.ibm.com>
Reviewed-by: Sachin Gupta <sgupta2m@in.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously if a PLID was passed to the ctor of the sbe_retry_handler
we would link all errors logs created during the process of recovering
the SBE with this PLID. But if no PLID was passed then we would not
link the logs. This commit changes it so if no PLID is passed to the
ctor then the first log created in the recovery process will become
the PLID that all logs after will be set to.
Change-Id: I93ef3a48b4cc1d7df3237d7ba3dfefba21d5fb6b
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56885
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Code for SP ATTN, COMM, and SBE FFDC areas has been extended to
all chips/nodes. The COMM area base address calculation is now
updated to use the lowest addressable location for the master
node.
Change-Id: Ib02e62958a520c60e4bcc5bd9d4c4257893adbd9
RTC:189038
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56614
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Extends SBE window support to open a new window for OPAL trace.
Change-Id: Ifee6fe4a8cc1e58ca9ddd00d57c91356ad55cc3d
RTC:191010
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57054
CI-Ready: Marshall J. Wilks <mjwilks@us.ibm.com>
Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add the Istep number and substep number to Hostboot Error Logs
to assist in problem debug. These items will be added as a user
data record to all Hostboot Error Logs prior to Runtime.
Change-Id: Ib5d269f3c1853d6d6856669744630dc130fa7094
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/54764
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
-PRD will call this function in response to a core unit
checkstop detected by PHYP.
The new function will mark the core as non-functional
and call a hardware procdure to update the multicast
groups for cores and chiplets. The procedure
will also update the OCC core configuration status
and the quad core status registers which reflect the
number of enable cores/quad in the system at runtime.
Change-Id: Ia7fc3f47dc1fee1f84d877d3d56b609d1aee1b17
RTC:188918
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/55154
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Richard Ward <rward15@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Partitions marked with readOnly tag in the xml were treated
as WRITABLE in the code. This change modifies the permissions
to be READ_ONLY and adds unit tests to test the read only functionality.
Change-Id: I8c1f23fd7e30edc38ff882c59716ab63a4f310e6
CQ: SW423350
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56771
CI-Ready: ILYA SMIRNOV <ismirno@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57066
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There are some items that applied to a single node implementation that can
be removed after all dependencies on them have been removed by other tasks.
This single node support is being moved/removed. Also a check is being
added to the VPD support so the node value does not index beyond the end
of the array of reserved memory addresses.
Change-Id: I7fea5ac9cdfa9f37caa57905d320633a8039e79d
RTC: 186585
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/55917
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit 4f32915aa1240d07bb2671010f95695ba5f306c3.
Change-Id: Ie51fd274d018df63aef6f725bf57c7b1f7f59265
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57026
CI-Ready: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Tested-by: Christian R. Geddes <crgeddes@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Before we initiate an HRESET we need to make sure that the perv
scratch register that the SBE looks at during boot are all zeros.
When these registers are zeros the SBE will ignore them and pull
values from its own image. We need to do this because Hostboot will
repurpose these registers after the SBE boots the first time so the
data in the registers is no longer valid. It is okay for the SBE to
pull the values from it's own image because during the IPL hostboot
customized the SBE image with the correct values.
Change-Id: I8b434d04cde3c384e35a3089a349a1d121b6b1dc
RTC: 180242
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56959
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
CI-Ready: Christian R. Geddes <crgeddes@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If we fail to boot the slave SBE we should mark it in the istep
errlog to ensure that we fail the istep and perform a reconfig
loop.
Change-Id: I70e67b5b3e1e35e0ee76eb1f158435ee44a436ef
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56882
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If PRD notices that a sbe vital attention is set (TP_LFIR 26) then
it will call hostboot code to attempt to recover the SBE. If this
occurs during IPL time then hostboot will not be able to recover
the SBE and we will deconfigure the processor. If this occurs
during runtime HBRT will attempt to run the retry_handler. This will
result in us calling hreset on the SBE that failed. If we were able
to recover the SBE then no error will be returned. If we are unable
to recover the SBE then we will return an error with a deconfig
record.
Change-Id: I3da6ec932ef8e59f7b2a184621a47e88d465e0c5
RTC: 167191
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56821
CI-Ready: Daniel M. Crowell <dcrowell@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When Hostboot has a TI with a PLID rather than a Reason Code (RC), HWSV does not
attempt the Hostboot Dump. Thought is that happens per the design as the error
log related to the PLID sent by Hostboot should already have the required
information. There are instances where the error log does not have sufficient
data and a dump would be beneficial. A path is being added so an error log can
be flagged as needing a Hostboot dump.
Change-Id: I97972308c70e7210f578fb818563bb9b0cd940b4
CQ: SW420219
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56600
CI-Ready: Daniel M. Crowell <dcrowell@us.ibm.com>
CI-Ready: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Enable HBRT to prepare for a concurrent code update on a multiple node system.
Modify preparation function called by Host to loop through all nodes on the
system. Make additional updates to go from supporting only a single node to
supporting multiple nodes.
Change-Id: I2d72b26abf40812641815051b968d6b540d27b00
RTC: 186584
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/53952
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
PHYP needs a way to know if SBE security backdoor is enabled
for debug purposes. This change creates a flag in TPM instance
data structure to indicate whether the backdoor is enabled. This
flag is passed by SBE to the hb bootloader; also added the flag
to indicate whether PCR is poisoned (default of 0).
The population of this flag will be implemented on Fleetwood.
Change-Id: I22305dbc9651134ba7dfe3b0bd3c760fe53c2c85
RTC: 188961
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56045
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
CI-Ready: Daniel M. Crowell <dcrowell@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the sbe_retry_handler code we have two methods we can use to restart
the sbe. They are restarting the cfam boot sequence (start_cbs HWP) and
performing a hw reset on the PPE (hreset HWP). We use start_cbs if there
are issues with initial power on of the slave proc's SBE because we will
not lose any state info (fabric isn't up yet). During runtime we will want
to use the hreset HWP to recover the SBE. Hreset is handy because it will
not force a reboot of the entire proc chip, so the fabric can stay up while
we reset the PPE in the SBE. This commit implements the code path for the
hreset HWP in the sbe_retry_handler. In addition this commit enables calls to
the sbe_retry_handler in rt_fwnotify's sbeAttemptRecovery function which
handles PHYP requests to recover the SBE.
(Also some small typos in related code fixed)
Change-Id: I8f85c38a09e8d5ab80b2809e5665c77a54e35bc4
CQ: SW415675
RTC: 180242
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56276
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit 571e1d84dfe50aaa674aa7e33abb75868b432d78.
Change-Id: I8720246ef94be07ce0a37151b7209c8080320d59
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56933
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Extends HDAT population to add TPM data to all functional nodes
- Added message sends from the master to each node
- Each node updates # of instances, sizes of structures, etc.
- Each node navigates to its appropriate offset in HDAT
- HDAT now populates entries for all TPMs in the blueprint
- Physical presence interaction mechanism is master-only obtained
- TPM SRTM and DRTM logs are no longer interlaced between TPM info
- Single node workaround reverted
Change-Id: Ic77cbeb7ba3d35a9f02ba68525ed79f27159e9bf
RTC:167290
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/55283
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously the sbe_retry_handler had logic and wording that
assumed that it was being used to tell if the slave sbe booted or not.
However this code has many more use cases then that. Also there was some
indirect recursion that made the code hard to follow. With this refactor
the code should be easier to follow and the vocabulary used should be more
generic.
Change-Id: If6520197b3dd561857e336ed89d9356c1f2601d6
CQ: SW416106
RTC: 167191
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/55896
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
Tested-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|