summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Axone pibmem repair logicRaja Das2019-02-224-85/+331
| | | | | | | | | | | | | | | | | | | | | | | | | - Read ring from MVPD - Uncompress rs4 to raw bit stream - encode raw bit stream to scom data table format per struct - append this table into repair section into seeprom Key_Cronus_Test=XIP_REGRESS Change-Id: I405ef44cc5c4c5a42018cc124d2903cd5b38a241 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/67195 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com> Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com> Tested-by: Cronus HW CI <cronushw-ci+hostboot@us.ibm.com> Reviewed-by: Joseph J. McGill <jmcgill@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: SRINIVAS V. POLISETTY <srinivan@in.ibm.com> Reviewed-by: Claus M. Olsen <cmolsen@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/67198 Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Tested-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Update p9a_10 engd - spy name changesSoma BhanuTej2019-02-223-3/+13
| | | | | | | | | | | | | | | | | | PVR_VERSION added. Change-Id: If7adb6125b13f0868a4bed4f468422b5c0628fce Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71567 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com> Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Benjamin Gass <bgass@us.ibm.com> Reviewed-by: Thi N. Tran <thi@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71623 Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Tested-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* p9_sbe_npll_setup: Enable spread spectrum before starting PLLJoachim Fenkes2019-02-221-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | There's a synchronizer missing on the sscgen input of the filter PLLs, thus any changes to that input must be made before the PLL is taken out of reset, or the spread generator inside the PLL might start up in a skewed state, resulting in a broken spread profile. Thus, change the procedure to enable spread before taking the PLL out of reset, and also make sure we never try to synchronously enable spread. Change-Id: Ie0e545a6baf492d394a7d63d99ba5b83a0c46423 CQ: SW457204 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71886 Reviewed-by: Joseph J. McGill <jmcgill@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com> Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: Kevin F. Reick <reick@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71913 Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Tested-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* PRD: MPIPL Make sure PRD is initialized in startScrubCaleb Palmer2019-02-221-0/+13
| | | | | | | | | Change-Id: I4bf8e460c4087ada07112aedb7c990d497f8234b CQ: SW457994 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72336 Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com>
* PRD: Explorer rule and makefile updatesCaleb Palmer2019-02-225-2/+10
| | | | | | | | | | | | Change-Id: Id35a1f07a025566bcf082d5fcc0f773c4477257e Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72199 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Brian J. Stegmiller <bjs@us.ibm.com> Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72279 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
* PRD: Add MCFIR to capture group for mem mirror FFDCCaleb Palmer2019-02-224-1/+45
| | | | | | | | | | | Change-Id: I40a1f35abb1fdd37e0e30b3414e286f3f3845fd9 CQ: SW457142 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71896 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Brian J. Stegmiller <bjs@us.ibm.com> Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72278 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
* Revert "PRD: Initial NVDIMM Support"Caleb Palmer2019-02-2215-480/+9
| | | | | | | | | | | | | | This reverts commit 027226769c8b4f6f57c31e5ebbc41eca5ade2a28. Change-Id: I4b618250a71432121900ac711210723d0129d463 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72081 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Brian J. Stegmiller <bjs@us.ibm.com> Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72277 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
* Adds RAS features to LRDIMM MRD_FINE and use fine_recorder classLi Meng2019-02-221-1/+13
| | | | | | | | | | | | | Change-Id: I379b888251910097a6c011978384b6feaecf258f Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69377 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com> Reviewed-by: ANDRE A. MARIN <aamarin@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69432 Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Adds new algorithm for DWLLi Meng2019-02-221-1/+14
| | | | | | | | | | | | | | | Change-Id: Icc6321c9ed690bd67a640f2b0ea317f562a37fcb Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69339 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: Louis Stermole <stermole@us.ibm.com> Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69341 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* PM: fix cable pull issue in clearing clock sync upon PM Complex ResetGreg Still2019-02-221-11/+11
| | | | | | | | | | | | | | | | | | | | | - Don't clear CACCR[15] (clock sync enable); allow it to be fully managed by STOP entry/exit in CME Hcode. Key_Cronus_Test=PM_REGRESS Change-Id: I92cc74043b8aefd7351ff765083de703675b8a39 CQ: SW453649 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71990 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: RAHUL BATRA <rbatra@us.ibm.com> Dev-Ready: Michael S. Floyd <mfloyd@us.ibm.com> Reviewed-by: Michael S. Floyd <mfloyd@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71991 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* P9 Obus MNFG Errors Attribute FixChris Steffen2019-02-221-3/+3
| | | | | | | | | | | | | | | | | | | - Changed MNFG thresholds coniditional statement to bitwise AND Change-Id: I71cdad3384f2ba942a5bd13754ce200ed1d76da3 CQ: SW457203 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71887 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: Dean Sanner <dsanner@us.ibm.com> Reviewed-by: Megan P. Nguyen <pmegan@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71901 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* PM HWP: Fixed error path bug pertaining to query STOP state.Prem Shanker Jha2019-02-221-10/+12
| | | | | | | | | | | | | | | | | | | | | | | | If HWP fails to scom core or cache clock status register, it appropriately initiatlizes the data structs and attributes to correctly reflect the hardware state as known at the point of failure. Key_Cronus_Test=PM_REGRESS Change-Id: I585277fcc475f074a5db45b5aa1f1517e0ca2531 CQ: SW455632 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70790 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com> Tested-by: Cronus HW CI <cronushw-ci+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: RANGANATHPRASAD G. BRAHMASAMUDRA <prasadbgr@in.ibm.com> Reviewed-by: Gregory S. Still <stillgs@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70812 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add ATTR_ENABLED_OBUS_BRICKSDan Crowell2019-02-221-0/+15
| | | | | | | | | | | | | | | | | | | Adding a new attribute for p9_check_proc_config to consume as the first step in removing the OBUS_BRICK target. Change-Id: Ic2bccde518e6f01f2df4d9f7e03571a2208a534c Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70546 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com> Tested-by: PPE CI <ppe-ci+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: Prem Shanker Jha <premjha2@in.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70558 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
* Adds the explorer training response structureStephen Glancy2019-02-222-24/+218
| | | | | | | | | | | | | | | Change-Id: I30e1e66620d1cfab3b2349899baac3e8ed325e4d Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71767 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: ANDRE A. MARIN <aamarin@us.ibm.com> Reviewed-by: Mark Pizzutillo <mark.pizzutillo@ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: Louis Stermole <stermole@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71805 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Secureboot: Enable New Multinode Trustedboot TransferMike Baiocchi2019-02-223-54/+215
| | | | | | | | | | | | | | | | | | This commit adds a new exchange of data between the master and slave nodes to further enhance our Trustedboot IPL. It builds upon updates to the transfer mechanism between the nodes and new TPM commands on the nodes. Change-Id: I18bd152e4bd3aeb9b79eb9ec774fc80871874155 RTC:203642 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71903 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Secureboot: Enhanced Multinode Comm: Quote Size FixIlya Smirnov2019-02-222-1/+5
| | | | | | | | | | | | | | | | | | It was discovered that the quote and signature data returned from TPM as part of the new multinode comm contained an extra uint32 size field that should not be inlcuded into the slave quote blob. This commit removes that size field from the quote. Change-Id: Ia40eeee67567d08b1c1982f964dab1db411ff81b RTC: 203645 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72216 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Christopher J. Engel <cjengel@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Statically allocate work pages for PNOR Resource ProviderDan Crowell2019-02-222-20/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | Any time the PNOR Resource Provider loads in a page that is ECC protected it allocates 0x1200 bytes to hold the data while it is decoded. Continuously allocating 2 pages from the heap leads to a couple of potential issues: - fragmentation of memory due to constant new/delete of pages - extremely low memory situation could prevent new code from paging in The solution here is to place the working buffer inside the PNOR RP class itself. This means we will only do a single allocation of the memory early on in the boot and the memory is always available. Change-Id: I7faabb6be7cc89abdb8a8fb962e0623a2bcd5e99 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71546 Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Adds blank files for explorer training handlerStephen Glancy2019-02-223-0/+72
| | | | | | | | | | | | | | | Change-Id: I07727776900ee36a63e0bc9036d9fde92347cdf3 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71705 Reviewed-by: Mark Pizzutillo <mark.pizzutillo@ibm.com> Reviewed-by: Louis Stermole <stermole@us.ibm.com> Reviewed-by: ANDRE A. MARIN <aamarin@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71804 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Generalize set fields in pre_data_initAndre Marin2019-02-217-571/+699
| | | | | | | | | | | | | | | | | | | | | | Added a definition file for data engine traits for specialization purposes. Moved pre_data_engine definitions into a common templated version. Change-Id: I891690f9f4d9d6865309c329f8fc769dd4836a23 Original-Change-Id: Ifb204da9cc6eb9d5d36b6eaeb1e1a5e99c97544e Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69411 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Louis Stermole <stermole@us.ibm.com> Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com> Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com> Dev-Ready: ANDRE A. MARIN <aamarin@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72223 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Update Bad Bits and Row Repair for new MSS attrsCaleb Palmer2019-02-211-20/+59
| | | | | | | | | | | | Change-Id: I9aa911e5620a19d5b0af69f3f16975a3a0f55b71 RTC: 192544 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70138 Reviewed-by: Brian J. Stegmiller <bjs@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com>
* fix VINI RT HW LX keyword for PhypSampa Misra2019-02-212-0/+5
| | | | | | | | | | | Change-Id: I7757b11bdb8643d7f0ea85cc881e00826e5715bb Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/68904 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Jayashankar Padath <jayashankar.padath@in.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add omi setup/training calls to istep 12Christian Geddes2019-02-203-8/+129
| | | | | | | | | | | | | | | | | Recently we have imported some of the HWPs for omi training. This commit adds calls to our ISTEP code to make these omi HWPs get called during istep 12. This is done according to P9A IPL Flow doc. Steps added : exp_omi_setup ( 12.7 ) exp_omi_train ( 12.8 ) p9a_omi_train ( 12.8 ) Change-Id: Ia6ba21beb7348945cd93719dc65966f6af1887ab RTC: 195554 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71988 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Use shell command to look up CEC_TYPEChristian Geddes2019-02-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | Using the native 'env' command in simics causes users to have problems when reloading checkpoints on pre-axone systems. When you reload the checkpoint CEC_MODEL is not defined and it gives env an error which crashes the simics run. Using the shell command allows it to fail to find the CEC_MODEL variable and is able to continue on. This is actually reverting back to the original behavior prior to suggestions from simics team. Change-Id: Ieefd0d73e0651cf233f94a297f8f4ea2f5f0dbfe Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72161 Reviewed-by: Hieu C. Nguyen <hieu.nguyen@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: CALEB SCHLOSSIN <calebs@us.ibm.com> Reviewed-by: Michael J. Walsh <micwalsh@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Secureboot: Enhanced Multinode Comm: Master NodeIlya Smirnov2019-02-2019-118/+590
| | | | | | | | | | | | | | | | | | | | | | | | This commit introduces the logic to create the master node nodecomm request to the slave nodes and logic to process the responses from the slave nodes. The data from the slave nodes (the slave quote) is hashed and extended into PCR1. The binary quote blob is also included in the TPM log as a log message. Additional changes: the logic to relocate the TPM log to increase its size, and the logic to allow uint8_t* instead of char* as the TPM log message. Change-Id: Ide4465f0d4a91aec815c9db5d765cdbde231dcd3 RTC: 203644 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71407 Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Reviewed-by: Christopher J. Engel <cjengel@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Update simics build and pull in Axone binary to pnor generationChristian Geddes2019-02-206-26/+25
| | | | | | | | | | | | | | | | | | | | | | Previously we were using some CUMULUS binaries as placeholders until Axone versions were available. We now use the Axone version of the SBE and HW ref images. Also for MEMD we will now just fill it in with zeroed out ECC (all FF's w/ 0 for ECC bit). No plans to use that MEMD now but setting it aside for DDIMM config overwrites. When we pulled in the new SBE image we hit issues with the VPD being used not having the correct sizes. MVPD for Axone is not complete yet so until that gets resolved we will disable sbe updates for Axone. RTC: 197497 Change-Id: I470f44d297179556d7c2eb7b210c91a2cd38f23c Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72090 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Secureboot: Enhanced Multinode Comm: Slave NodeIlya Smirnov2019-02-1914-61/+632
| | | | | | | | | | | | | | | | | | | | | | This commit introduces the logic to create the slave response for the new enhanced multinode comm protocol. The slave response consists of an eye catcher, node ID, quote and signature data from TPM, PCR contents of the slave node TPM, Attestation Key Certificate, and the TPM log. All of the above data is packaged into a binary blob to be sent back to the master node. Change-Id: I927c6ca937e6c07af4185cf54c782697c5d822f6 RTC: 203643 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70791 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com> Reviewed-by: Marshall J. Wilks <mjwilks@us.ibm.com> Reviewed-by: Christopher J. Engel <cjengel@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* P9 Xbus/DMI CM WorkaroundChris Steffen2019-02-196-31/+134
| | | | | | | | | | | | | | | | | | - Linearity Workaround to help with data compression Change-Id: I7957e5aa6c2e10463e09ca6c6d2ddcacb8aee7d2 CQ: FW685728 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/68851 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Megan P. Nguyen <pmegan@us.ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/68853 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
* Enable mss_scrub on MPIPL if NVDIMM is configuredTsung Yeung2019-02-196-80/+122
| | | | | | | | | | | | | | | | NVDIMM restore blows away the scrub settings so it needs to be reinitialized during MPIPL Change-Id: I67f74c71e98b8907351eb7477bf197a941aefb8d Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71786 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Caleb N. Palmer <cnpalmer@us.ibm.com> Reviewed-by: TSUNG K. YEUNG <tyeung@us.ibm.com> Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Create FAPI mapping function for DDIM SPD dataRoland Veloz2019-02-193-0/+881
| | | | | | | | | | | | | | | | | | - Created files p9_get_ddr_efd.mk/H/C which contain the FAPI mapping function Change-Id: I0f21380b7f6234ab3b88ffc0490c36e5dcd204e0 RTC:203718 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71910 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Louis Stermole <stermole@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Reviewed-by: Matt K. Light <mklight@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72072 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
* Add p9a_mss_volt procedureLouis Stermole2019-02-192-1/+95
| | | | | | | | | | | | | | | | Change-Id: Ibcbfc4fbd78beb2a4793f15dcc61a3d1ff5cf679 Original-Change-Id: I893685b365f6c815653717d4cc8149f2ea7acb94 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/68412 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com> Reviewed-by: ANDRE A. MARIN <aamarin@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72089 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
* Add L1 procedures for p9a and makefilesAndre Marin2019-02-193-0/+62
| | | | | | | | | | | | | | Change-Id: I87317508f31a2efecaffcf6aed05c0b76579dfd6 Original-Change-Id: I9f56a57f85a1b970bb17adde474ff6f89dc3c19d Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69155 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Louis Stermole <stermole@us.ibm.com> Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72088 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
* Add empty HWPs, UTs, and makefiles needed for AxoneAndre Marin2019-02-194-0/+96
| | | | | | | | | | | | | | | Change-Id: I0442c28cd6bf8d9e1677a38a5fbc804773b1f512 Original-Change-Id: Iba9ffe506bd84667240f6cb00accbb362e93813d Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69142 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com> Reviewed-by: Louis Stermole <stermole@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72087 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
* Handle partial-bad MCS logic correctlyDan Crowell2019-02-192-5/+13
| | | | | | | | | | | | | | | | | One of the rewritten PG rules was incorrect for modules that have a MCS marked bad, e.g. Sforza. Change-Id: I30672b51f81ba74b51ece6e878e462106c090350 CQ: SW457231 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72010 Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matthew Raybuck <matthew.raybuck@ibm.com> Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
* Support reading UCD flash update LIDsNick Bofferding2019-02-189-24/+327
| | | | | | | | | | | | | | | | | | | - Added support to read a single LID container and securely verify it - Added new compile flag CONFIG_UCD_FLASH_UPDATES to enable/disable future TI UCD9090/UCD90120A flash updates - Created shell function to hold the UCD flash update logic Change-Id: I94f3e43558af5d7951febdf6ff0685c120d2db0e RTC: 201992 CMVC-Prereq: 1076388 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71945 Reviewed-by: Marshall J. Wilks <mjwilks@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* HTMGT: Change OCC logs to info while recovery is still being attemptedChris Cain2019-02-182-61/+100
| | | | | | | | | | | | | Change-Id: I0a46cacbc7e473dedd38ce9656ab25f5452c77c1 CQ: SW456777 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71869 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Sheldon Bailey <baileysh@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Christopher J. Cain <cjcain@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add empty p9a unit test and axone_pre_data_engine files for HB mirroringAndre Marin2019-02-171-0/+24
| | | | | | | | | | | | | | Change-Id: I771015bb61d4b89d46c9570bbe16a57f55645818 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/68668 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Louis Stermole <stermole@us.ibm.com> Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71982 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
* Add L1 procedures for p9a and makefilesAndre Marin2019-02-174-0/+28
| | | | | | | | | | | | | | | Change-Id: Ifffd416d18cf52d76e7fb93f5aa73408d5cacd17 Original-Change-Id: I9f56a57f85a1b970bb17adde474ff6f89dc3c19d Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69155 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Louis Stermole <stermole@us.ibm.com> Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71981 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
* Add empty HWPs, UTs, and makefiles needed for AxoneAndre Marin2019-02-174-0/+96
| | | | | | | | | | | | | | Change-Id: Iba9ffe506bd84667240f6cb00accbb362e93813d Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69142 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com> Reviewed-by: Louis Stermole <stermole@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71980 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
* Add new path in EEPROM device op to allow reading from new EECACHEChristian Geddes2019-02-1628-2602/+3328
| | | | | | | | | | | | | | | | | | | | | | | | | | Recently a new EECACHE section was introduced to Hostboot. This section gets populated with a copy of every PRIMARY_VPD eeprom (someday could contain other eeprom roles also) during host_discover_targets. This commit add support to allow users to select where they want to perform their EEPROM device operation. If they pass CACHE to the deviceOp macro then a read will come from the pnor cache, writes will write to pnor cache and then also write to the eeprom HW. If HARDWARE is passed in then reads and writes will be directly done on the eeprom hardware. If AUTOSELECT is passed the code will check our cache to see if we have a copy of the eeprom in question, if we have a copy we will go the CACHE path, if no copy exists we will go the HARDWARE path. Along with this change some reorganization was done w/ the eeprom related files. RTC: 196805 Change-Id: If2c4e5d3e338a1a10780740c1a019eb4af003b73 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70822 Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Update istep_mss modules makefile to generate mss accessorsChristian Geddes2019-02-162-2/+159
| | | | | | | | | | | | | | | | | | Recently in hostboot we have pulled in a script from the EKB that will parse various memory related XML files and generated header files that the memory HWPs use to access various attributes. This commit will add calls to the makefile to make sure that these headers get generated during the build. Change-Id: I071f32553fc9f8e5cdc3645b18f1ca7870cb80ad Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71870 Reviewed-by: Louis Stermole <stermole@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Set simics xml to match simics model for OCMB port numberingChristian Geddes2019-02-151-7/+7
| | | | | | | | | | | | | | | | | There was a bug where the i2c controller information had the wrong port values for OCBM targets 2-8. Correct value for the port for these targets is 0. In the current axone simics model OCMB 0 is on port 1 and OCMBs 1-8 are behind a 8-1 mux on port 0. Port was correct for OCMB 0 and 1 but incorrect for 2-8. Change-Id: Id34a812e2f278d0bc90beb44ba26b0fec32d2087 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71700 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add new P9A hwp error xml path to fapi2 file generation makefileChristian Geddes2019-02-151-1/+3
| | | | | | | | | | | | | | | | In fapi2.mk we run a lot of scripts which generate various headers based upon information we parse for different XML files. We were missing the new path of XML files that was added for Axone and this commit addresses that. Change-Id: I2815221483a71d62120503b35feaa5c719cc8866 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71943 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Explorer_inband support: add response data buffer to getRSPMatt Derksen2019-02-153-4/+23
| | | | | | | | | | | | | | | | | | | getRSP can check if a data response exists and then grab that data and load it into a vector. The caller is responsible for converting the data into big endian format for their expected response structure. Change-Id: Ie97488cde7036c230ab02610b5105e590c5d4249 RTC:186630 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69533 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69561 Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
* Use proper top-level include for fapi2 targetDan Crowell2019-02-157-14/+14
| | | | | | | | | | | | | | | | | | There is a specific order of #include for fapi2 header files. The generic name (target.H) is the only one that should be used by application code. That header will include the fapi2-specific header (fapi2_target.H) and the plat-specific (plat_target.H) in the proper order. Change-Id: I7e7c3429bfccbc7e1e675a8716fc127695cad15a Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71539 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Brian J. Stegmiller <bjs@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Support tool that can package UCD* flash images into a binaryNick Bofferding2019-02-152-1/+488
| | | | | | | | | | | | | | | | - Implements new tool that takes UCD* flash images, aggregates them together, and puts a TOC on the front. Supported UCD models include UCD9090 and UCD90120A - Distributes the tool to FSP and OpenPOWER trees Change-Id: I21af0d0dc5b9234d9be50227c2752a136bb2aad6 RTC: 201992 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71548 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com> Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add call to exp_check_for_ready to istep 10.4Christian Geddes2019-02-152-13/+62
| | | | | | | | | | | | | | | | | | As per P9 Axone IPL flow doc, this HWP needs to be called on every functional OCMB targets. This is called after the p9a_ocmb_enable hwp is called in this istep. Change-Id: I5bab233545769f396ba35b6d61c0733a9afd9087 RTC: 195553 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71787 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Add expscom test casesChristian Geddes2019-02-155-6/+738
| | | | | | | | | | | | | | | | | | This commit introduces some tests that check that scoms out to the explorer chip work. This first commit only enables test through the i2c path to ddimm0. Eventually expscomtest.H should contain tests that write and read over both i2c and mmio on ddimms that are and are not behind mux chips. Change-Id: I9a0e6612fd1d72a26991b936301aabd29508db90 Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69579 Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com> Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Reviewed-by: Matt Derksen <mderkse1@us.ibm.com> Reviewed-by: Roland Veloz <rveloz@us.ibm.com> Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
* Fix tags in exp_omi_train attribute xmlChristian Geddes2019-02-151-5/+7
| | | | | | | | | | | | | | | | | | | There was some bugs where we were defaulting to zero instead of using the <initToZero/> tag and did not specify platInit on values with real defaults. These changes are required in order to make this XML consumable by Hostboot Change-Id: Iab9ea1b4681c2a4d78050f271dc52326016d2ded Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71944 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: Louis Stermole <stermole@us.ibm.com> Reviewed-by: ANDRE A. MARIN <aamarin@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71949 Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: Christian R. Geddes <crgeddes@us.ibm.com>
* Convert mss explorer and axone code to use attr accessorsLouis Stermole2019-02-151-0/+7
| | | | | | | | | | | | | | | | | | Add more xml files to accessor generator makefiles Also fix const param errors in attr setter functions Change-Id: I4d8bd353689fe65179c4cd47cfef11b849e24147 Original-Change-Id: I178ee5c420cf6f9f8bae61a6ad80bdaea81e231f Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69954 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com> Reviewed-by: ANDRE A. MARIN <aamarin@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71935 Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: Christian R. Geddes <crgeddes@us.ibm.com>
* Add new MSS attributes for AxoneLouis Stermole2019-02-151-0/+15
| | | | | | | | | | | | | | | | | | | | | ATTR_MEM_MRW_IS_PLANAR ATTR_MEM_EFF_DIMM_SPARE ATTR_MEM_VPD_DQ_MAP Change-Id: I1e63f4d6113f4adbcd7f149f00c14bb023115611 Original-Change-Id: I36915bf7aa8c6fffc3e8b27aea595d9feb1760dc Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69903 Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com> Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com> Reviewed-by: Caleb N. Palmer <cnpalmer@us.ibm.com> Tested-by: HWSV CI <hwsv-ci+hostboot@us.ibm.com> Tested-by: Hostboot CI <hostboot-ci+hostboot@us.ibm.com> Reviewed-by: STEPHEN GLANCY <sglancy@us.ibm.com> Reviewed-by: ANDRE A. MARIN <aamarin@us.ibm.com> Reviewed-by: Jennifer A. Stofer <stofer@us.ibm.com> Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/71934 Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com> Tested-by: Christian R. Geddes <crgeddes@us.ibm.com>
OpenPOWER on IntegriCloud