diff options
Diffstat (limited to 'src/usr/targeting/common/xmltohb/attribute_types.xml')
| -rw-r--r--[-rwxr-xr-x] | src/usr/targeting/common/xmltohb/attribute_types.xml | 215 |
1 files changed, 206 insertions, 9 deletions
diff --git a/src/usr/targeting/common/xmltohb/attribute_types.xml b/src/usr/targeting/common/xmltohb/attribute_types.xml index 6b0c2acdd..5250b2b05 100755..100644 --- a/src/usr/targeting/common/xmltohb/attribute_types.xml +++ b/src/usr/targeting/common/xmltohb/attribute_types.xml @@ -959,6 +959,24 @@ <type>uint64_t</type> <default>0x05</default> </field> + <!-- i2c Mux Bus Selector Definition --> + <field> + <default>0xFF</default> + <description>Determines which of the N selectable buses the mux + will connect to. OxFF indicates no mux present + or N/A.</description> + <name>i2cMuxBusSelector</name> + <type>uint8_t</type> + </field> + <!-- i2c Mux Path Definition --> + <field> + <!-- NOTE: physical:sys-0 implies that there is no mux in + the bus path for this part. --> + <default>physical:sys-0</default> + <description>Entity path to the I2C mux for this device.</description> + <name>i2cMuxPath</name> + <type>EntityPath</type> + </field> </complexType> <persistency>non-volatile</persistency> <readable/> @@ -1033,6 +1051,24 @@ <name>writeCycleTime</name> <type>uint64_t</type> </field> + <!-- i2c Mux Bus Selector Definition --> + <field> + <default>0xFF</default> + <description>Determines which of the N selectable buses the mux + will connect to. OxFF indicates no mux present + or N/A.</description> + <name>i2cMuxBusSelector</name> + <type>uint8_t</type> + </field> + <!-- i2c Mux Path Definition --> + <field> + <!-- NOTE: physical:sys-0 implies that there is no mux in + the bus path for this part. --> + <default>physical:sys-0</default> + <description>Entity path to the I2C mux for this device.</description> + <name>i2cMuxPath</name> + <type>EntityPath</type> + </field> </complexType> <description>Information needed to address the EERPROM slaves</description> <id>EEPROM_SBE_BACKUP_INFO</id> @@ -1109,6 +1145,24 @@ <name>writeCycleTime</name> <type>uint64_t</type> </field> + <!-- i2c Mux Bus Selector Definition --> + <field> + <default>0xFF</default> + <description>Determines which of the N selectable buses the mux + will connect to. OxFF indicates no mux present + or N/A.</description> + <name>i2cMuxBusSelector</name> + <type>uint8_t</type> + </field> + <!-- i2c Mux Path Definition --> + <field> + <!-- NOTE: physical:sys-0 implies that there is no mux in + the bus path for this part. --> + <default>physical:sys-0</default> + <description>Entity path to the I2C mux for this device.</description> + <name>i2cMuxPath</name> + <type>EntityPath</type> + </field> </complexType> <description>Information needed to address the EERPROM slaves</description> <id>EEPROM_SBE_PRIMARY_INFO</id> @@ -1185,6 +1239,24 @@ <name>writeCycleTime</name> <type>uint64_t</type> </field> + <!-- i2c Mux Bus Selector Definition --> + <field> + <default>0xFF</default> + <description>Determines which of the N selectable buses the mux + will connect to. OxFF indicates no mux present + or N/A.</description> + <name>i2cMuxBusSelector</name> + <type>uint8_t</type> + </field> + <!-- i2c Mux Path Definition --> + <field> + <!-- NOTE: physical:sys-0 implies that there is no mux in + the bus path for this part. --> + <default>physical:sys-0</default> + <description>Entity path to the I2C mux for this device.</description> + <name>i2cMuxPath</name> + <type>EntityPath</type> + </field> </complexType> <description>Information needed to address the EERPROM slaves</description> <id>EEPROM_VPD_BACKUP_INFO</id> @@ -1268,6 +1340,24 @@ <name>writeCycleTime</name> <type>uint64_t</type> </field> + <!-- i2c Mux Bus Selector Definition --> + <field> + <default>0xFF</default> + <description>Determines which of the N selectable buses the mux + will connect to. OxFF indicates no mux present + or N/A.</description> + <name>i2cMuxBusSelector</name> + <type>uint8_t</type> + </field> + <!-- i2c Mux Path Definition --> + <field> + <!-- NOTE: physical:sys-0 implies that there is no mux in + the bus path for this part. --> + <default>physical:sys-0</default> + <description>Entity path to the I2C mux for this device.</description> + <name>i2cMuxPath</name> + <type>EntityPath</type> + </field> </complexType> <description>Information needed to address the EEPROM slaves</description> <id>EEPROM_VPD_PRIMARY_INFO</id> @@ -1295,8 +1385,8 @@ </attribute> <attribute> - <!-- @fixme --> <id>EFF_DRAM_COLS</id> + <!-- @fixme --> <description>Number of DRAM columns. Initialized and used by HWPs.</description> <simpleType> <uint8_t/> @@ -1307,8 +1397,8 @@ </attribute> <attribute> - <!-- @fixme --> <id>EFF_DRAM_ROWS</id> + <!-- @fixme --> <description>Number of DRAM rows. Initialized and used by HWPs.</description> <simpleType> <uint8_t/> @@ -1455,6 +1545,24 @@ <name>devAddr</name> <type>uint8_t</type> </field> + <!-- i2c Mux Bus Selector Definition --> + <field> + <default>0xFF</default> + <description>Determines which of the N selectable buses the mux + will connect to. OxFF indicates no mux present + or N/A.</description> + <name>i2cMuxBusSelector</name> + <type>uint8_t</type> + </field> + <!-- i2c Mux Path Definition --> + <field> + <!-- NOTE: physical:sys-0 implies that there is no mux in + the bus path for this part. --> + <default>physical:sys-0</default> + <description>Entity path to the I2C mux for this device.</description> + <name>i2cMuxPath</name> + <type>EntityPath</type> + </field> </complexType> <persistency>non-volatile</persistency> <readable/> @@ -1621,6 +1729,7 @@ <writeable/> </attribute> + <!-- Required by FSP --> <attribute> <id>FREQ_PROC_REFCLOCK</id> <description> @@ -2016,8 +2125,8 @@ <value>0xA</value> </enumerator> <enumerator> - <!-- deprecated --> <name>NVLINK</name> + <!-- deprecated --> <value>0xB</value> </enumerator> <enumerator> @@ -2056,13 +2165,13 @@ <value>0x1</value> </enumerator> <enumerator> - <!-- deprecated --> <name>955X</name> + <!-- deprecated --> <value>0x1</value> </enumerator> <enumerator> - <!-- deprecated --> <name>SEEPROM</name> + <!-- deprecated --> <value>0x2</value> </enumerator> <enumerator> @@ -2082,8 +2191,8 @@ <value>0x5</value> </enumerator> <enumerator> - <!-- deprecated --> <name>NVLINK</name> + <!-- deprecated --> <value>0x6</value> </enumerator> <enumerator> @@ -2398,6 +2507,51 @@ <attribute> <complexType> + <description>Structure to define the addressing for + an I2C mux target. </description> + <!-- Master Target Definition --> + <field> + <!--- NOTE: default physical sys-0 is not a valid entity path, + this must be populated with a valid entity path. --> + <default>physical:sys-0</default> + <description>Entity path to the chip that contains the I2C + master.</description> + <name>i2cMasterPath</name> + <type>EntityPath</type> + </field> + <!-- Port Definition --> + <field> + <default>0x00</default> + <description>Port from the I2C Master device. This is a + 6-bit value. </description> + <name>port</name> + <type>uint8_t</type> + </field> + <!-- Device Address Definition --> + <field> + <default>0x00</default> + <description>Device address on the I2C bus. This is a 7-bit + value, but then shifted 1 bit left. </description> + <name>devAddr</name> + <type>uint8_t</type> + </field> + <!-- Engine Definition --> + <field> + <default>0x00</default> + <description>I2C master engine. This is a 2-bit value. </description> + <name>engine</name> + <type>uint8_t</type> + </field> + </complexType> + <description>Information used to control a specific i2c mux device, + to select a particular target bus. </description> + <id>I2C_MUX_INFO</id> + <persistency>non-volatile</persistency> + <readable/> + </attribute> + + <attribute> + <complexType> <description>Structure which defines which I2C access method to use at a point in time. Only applicable if target supports one or more I2C types. Only one bit (of the first two) can ever be set at any one time. @@ -2774,6 +2928,7 @@ </simpleType> </attribute> + <!-- End Required by FSP --> <attribute> <id>MAX_DMI_PER_PROC</id> <description> @@ -3172,7 +3327,6 @@ </description> <simpleType> <uint64_t> - <!-- 4PT --> <default>0x4000000000000</default> </uint64_t> </simpleType> @@ -3689,6 +3843,9 @@ <enumerator> <name>AST2500</name> </enumerator> + <enumerator> + <name>PCA9847</name> + </enumerator> <id>MODEL</id> </enumerationType> @@ -6068,8 +6225,8 @@ <simpleType> <uint16_t/> </simpleType> - <!-- @fixme --> <persistency>non-volatile</persistency> + <!-- @fixme --> <readable/> <writeable/> <ignoreEkb/> @@ -6979,6 +7136,24 @@ <name>devAddr</name> <type>uint8_t</type> </field> + <!-- i2c Mux Bus Selector Definition --> + <field> + <default>0xFF</default> + <description>Determines which of the N selectable buses the mux + will connect to. OxFF indicates no mux present + or N/A.</description> + <name>i2cMuxBusSelector</name> + <type>uint8_t</type> + </field> + <!-- i2c Mux Path Definition --> + <field> + <!-- NOTE: physical:sys-0 implies that there is no mux in + the bus path for this part. --> + <default>physical:sys-0</default> + <description>Entity path to the I2C mux for this device.</description> + <name>i2cMuxPath</name> + <type>EntityPath</type> + </field> </complexType> <description>Information needed to address an I2C slave device</description> <id>TEMP_SENSOR_I2C_CONFIG</id> @@ -7255,6 +7430,24 @@ <name>byteAddrOffset</name> <type>uint8_t</type> </field> + <!-- i2c Mux Bus Selector Definition --> + <field> + <default>0xFF</default> + <description>Determines which of the N selectable buses the mux + will connect to. OxFF indicates no mux present + or N/A.</description> + <name>i2cMuxBusSelector</name> + <type>uint8_t</type> + </field> + <!-- i2c Mux Path Definition --> + <field> + <!-- NOTE: physical:sys-0 implies that there is no mux in + the bus path for this part. --> + <default>physical:sys-0</default> + <description>Entity path to the I2C mux for this device.</description> + <name>i2cMuxPath</name> + <type>EntityPath</type> + </field> </complexType> <description>Information needed to address the TPM slaves</description> <id>TPM_INFO</id> @@ -7624,9 +7817,13 @@ <value>76</value> </enumerator> <enumerator> - <name>LAST_IN_RANGE</name> + <name>I2C_MUX</name> <value>77</value> </enumerator> + <enumerator> + <name>LAST_IN_RANGE</name> + <value>78</value> + </enumerator> <id>TYPE</id> </enumerationType> |
