diff options
Diffstat (limited to 'src/import/chips/p9/procedures/hwp/memory/lib/mc/port.C')
| -rw-r--r-- | src/import/chips/p9/procedures/hwp/memory/lib/mc/port.C | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/src/import/chips/p9/procedures/hwp/memory/lib/mc/port.C b/src/import/chips/p9/procedures/hwp/memory/lib/mc/port.C index 0703fd828..4f5b2ad6b 100644 --- a/src/import/chips/p9/procedures/hwp/memory/lib/mc/port.C +++ b/src/import/chips/p9/procedures/hwp/memory/lib/mc/port.C @@ -85,8 +85,8 @@ fapi2::ReturnCode enable_periodic_cal( const fapi2::Target<fapi2::TARGET_TYPE_MC FAPI_INF("Enable periodic cal"); - uint8_t is_sim = 0; - FAPI_TRY( mss::is_simulation(is_sim) ); + uint8_t l_sim = 0; + FAPI_TRY( mss::is_simulation(l_sim) ); // Even if we're in sim, do these so that we do the attribute work (even though the values aren't used.) FAPI_TRY( mss::eff_memcal_interval(i_target, l_memcal_interval) ); @@ -140,7 +140,7 @@ fapi2::ReturnCode enable_periodic_cal( const fapi2::Target<fapi2::TARGET_TYPE_MC fapi2::buffer<uint64_t> l_data; // Don't enable zcal in sim as we don't enable it in the PHY - l_data.writeBit<TT::CAL0Q_CAL_INTERVAL_TMR0_ENABLE>(is_sim ? 0 : 1); + l_data.writeBit<TT::CAL0Q_CAL_INTERVAL_TMR0_ENABLE>(l_sim ? 0 : 1); l_data.insertFromRight<TT::CAL0Q_TIME_BASE_TMR0, TT::CAL0Q_TIME_BASE_TMR0_LEN>(0b01); l_data.insertFromRight<TT::CAL0Q_INTERVAL_COUNTER_TMR0, TT::CAL0Q_INTERVAL_COUNTER_TMR0_LEN>(0b010000000); @@ -162,7 +162,7 @@ fapi2::ReturnCode enable_periodic_cal( const fapi2::Target<fapi2::TARGET_TYPE_MC FAPI_TRY( reset_zqcal_config(i_target) ); // No ZQCAL in sim - l_periodic_cal_config.writeBit<TT::PER_ENA_ZCAL>(is_sim ? 0 : 1); + l_periodic_cal_config.writeBit<TT::PER_ENA_ZCAL>(l_sim ? 0 : 1); // Write the ZQCAL timer reload register // # DPHY01_DDRPHY_PC_ZCAL_TIMER_RELOAD_VALUE_P0 0x00A 0x8000c0090301143f @@ -180,7 +180,7 @@ fapi2::ReturnCode enable_periodic_cal( const fapi2::Target<fapi2::TARGET_TYPE_MC // have the story above opened to investigate fapi2::buffer<uint64_t> l_zcal_timer_reload; l_zcal_timer_reload.insertFromRight<TT::ZCAL_TIMER_RELOAD_VALUE, TT::ZCAL_TIMER_RELOAD_VALUE_LEN>( - is_sim ? (l_zqcal_interval / TT::MAGIC_NUMBER_SIM) + 1 : (l_zqcal_interval / TT::MAGIC_NUMBER_NOT_SIM) + 1); + l_sim ? (l_zqcal_interval / TT::MAGIC_NUMBER_SIM) + 1 : (l_zqcal_interval / TT::MAGIC_NUMBER_NOT_SIM) + 1); FAPI_INF("zcal timer reload: 0x%016lx", l_zcal_timer_reload); FAPI_TRY( mss::putScom(i_target, TT::PHY_ZCAL_TIMER_RELOAD_REG, l_zcal_timer_reload) ); } @@ -251,7 +251,7 @@ fapi2::ReturnCode enable_periodic_cal( const fapi2::Target<fapi2::TARGET_TYPE_MC // scom 0x800(0,1)c0080301143f { # _P[0:1] // bits , scom_data, expr; # must be >= 2... // # 0:47 , 0x000000000000, any ;# reserved - // # 48:63 , 0x0000, (def_is_sim) ;# match dials + // # 48:63 , 0x0000, (def_l_sim) ;# match dials // 48:63 , ((ATTR_EFF_MEMCAL_INTERVAL/196605)+1), (def_FAST_SIM_PC==0) ;# FAST_SIM_PER_CNTR=0 // 48:63 , ((ATTR_EFF_MEMCAL_INTERVAL/765)+1), (def_FAST_SIM_PC==1) ;# FAST_SIM_PER_CNTR=1 // # 48:63 , 0x01D1, any ; # 464 = 114ms @ 1600MHz @@ -263,7 +263,7 @@ fapi2::ReturnCode enable_periodic_cal( const fapi2::Target<fapi2::TARGET_TYPE_MC } // If we're in sim, enable the fast-sim mode - l_periodic_cal_config.writeBit<TT::PER_FAST_SIM_CNTR>(is_sim); + l_periodic_cal_config.writeBit<TT::PER_FAST_SIM_CNTR>(l_sim); l_periodic_cal_config.writeBit<TT::PER_ENA_SYSCLK_ALIGN>( l_per_memcal_mode_options.getBit<BIT_SYSCLK_ALIGN>() ); @@ -292,7 +292,7 @@ fapi2::ReturnCode enable_periodic_cal( const fapi2::Target<fapi2::TARGET_TYPE_MC // have the story above opened to investigate fapi2::buffer<uint64_t> l_cal_timer_reload; l_cal_timer_reload.insertFromRight<TT::PC_CAL_TIMER_RELOAD_VALUE, TT::PC_CAL_TIMER_RELOAD_VALUE_LEN>( - is_sim ? (l_memcal_interval / TT::MAGIC_NUMBER_SIM) + 1 : (l_memcal_interval / TT::MAGIC_NUMBER_NOT_SIM) + 1); + l_sim ? (l_memcal_interval / TT::MAGIC_NUMBER_SIM) + 1 : (l_memcal_interval / TT::MAGIC_NUMBER_NOT_SIM) + 1); FAPI_INF("phy cal timer reload: 0x%016lx", l_cal_timer_reload); FAPI_TRY( mss::putScom(i_target, TT::PHY_CAL_TIMER_RELOAD_REG, l_cal_timer_reload ) ); } |
