diff options
6 files changed, 26 insertions, 1227 deletions
diff --git a/src/import/chips/p9/procedures/hwp/memory/lib/mss_attribute_accessors.H b/src/import/chips/p9/procedures/hwp/memory/lib/mss_attribute_accessors.H index 1803cf909..1a4af3bd4 100644 --- a/src/import/chips/p9/procedures/hwp/memory/lib/mss_attribute_accessors.H +++ b/src/import/chips/p9/procedures/hwp/memory/lib/mss_attribute_accessors.H @@ -27408,49 +27408,6 @@ fapi_try_exit: /// -/// @brief ATTR_FREQ_PROC_REFCLOCK_KHZ getter -/// @param[out] uint32_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note The frequency of the processor refclock in kHz. Provided by the Machine Readable -/// Workbook. This can be overridden to adjust the refclock -/// frequency. -/// -inline fapi2::ReturnCode freq_proc_refclock_khz(uint32_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_FREQ_PROC_REFCLOCK_KHZ, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_FREQ_PROC_REFCLOCK_KHZ: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_FREQ_MEM_REFCLOCK getter -/// @param[out] uint32_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note The frequency of the memory refclock in MHz. Provided by the Machine Readable -/// Workbook. This is read by the set_ref_clock HWP to find out the desired -/// frequency. This can be overridden to adjust the refclock -/// frequency. -/// -inline fapi2::ReturnCode freq_mem_refclock(uint32_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_FREQ_MEM_REFCLOCK, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_FREQ_MEM_REFCLOCK: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// /// @brief ATTR_MAX_ALLOWED_DIMM_FREQ getter /// @param[out] uint32_t* memory to store the value /// @note Generated by gen_accessors.pl generateParameters (SYSTEM A) @@ -27482,31 +27439,6 @@ fapi_try_exit: } /// -/// @brief ATTR_MEMVPD_POS getter -/// @param[in] const ref to the TARGET_TYPE_MCS -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (NODIM A) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note The position of the MCS target's VPD selector data, relative to the EEPROM that -/// contains its data. The VPD defition supports up to 16 values per EEPROM. For -/// systems with an EEPROM per chip, this value should be equivalent to -/// ATTR_CHIP_UNIT_POS. For systems with a single EEPROM for all chips, the value -/// should follow the physical position in such a way to fit within the 16 available -/// slots. -/// -inline fapi2::ReturnCode memvpd_pos(const fapi2::Target<fapi2::TARGET_TYPE_MCS>& i_target, uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_MEMVPD_POS, i_target, o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_MEMVPD_POS: 0x%lx (target: %s)", - uint64_t(fapi2::current_err), mss::c_str(i_target)); - return fapi2::current_err; -} - -/// /// @brief ATTR_REQUIRED_SYNCH_MODE getter /// @param[out] uint8_t& reference to store the value /// @note Generated by gen_accessors.pl generateParameters (SYSTEM) @@ -27552,28 +27484,6 @@ fapi_try_exit: } /// -/// @brief ATTR_EXECUTION_PLATFORM getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Which execution platform the HW Procedure is running on Some HWPs (e.g. special -/// wakeup) use different registers for different platforms to avoid arbitration -/// problems when multiple platforms do the same thing -/// concurrently -/// -inline fapi2::ReturnCode execution_platform(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_EXECUTION_PLATFORM, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_EXECUTION_PLATFORM: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// /// @brief ATTR_MNFG_FLAGS getter /// @param[out] uint64_t& reference to store the value /// @note Generated by gen_accessors.pl generateParameters (SYSTEM) @@ -27594,26 +27504,6 @@ fapi_try_exit: return fapi2::current_err; } -/// -/// @brief ATTR_RECONFIGURE_LOOP getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Used to inidicate if a reconfigure loop is -/// needed -/// -inline fapi2::ReturnCode reconfigure_loop(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_RECONFIGURE_LOOP, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_RECONFIGURE_LOOP: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - /// /// @brief ATTR_FREQ_PB_MHZ getter @@ -27636,1120 +27526,6 @@ fapi_try_exit: return fapi2::current_err; } -/// -/// @brief ATTR_FREQ_A_MHZ getter -/// @param[out] uint32_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note The frequency of a processor's Abus, in MHz. This is the same for all chips in -/// the system. Provided by the -/// MRW. -/// -inline fapi2::ReturnCode freq_a_mhz(uint32_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_FREQ_A_MHZ, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_FREQ_A_MHZ: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_FREQ_X_MHZ getter -/// @param[out] uint32_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note The frequency of a processor's Xbus mesh clocks, in MHz. This is the same for -/// all chips in the -/// system. -/// -inline fapi2::ReturnCode freq_x_mhz(uint32_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_FREQ_X_MHZ, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_FREQ_X_MHZ: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_FREQ_CORE_FLOOR_MHZ getter -/// @param[out] uint32_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note The lowest frequency that a core can be set to in MHz. This is the same for all -/// cores in the system. Provided by the MVPD #V and is calculated as the max of the -/// Power Save -/// frequencies. -/// -inline fapi2::ReturnCode freq_core_floor_mhz(uint32_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_FREQ_CORE_FLOOR_MHZ, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_FREQ_CORE_FLOOR_MHZ: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_FREQ_CORE_NOMINAL_MHZ getter -/// @param[out] uint32_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note The nominal core frequency in MHz. This is the same for all cores in the system. -/// Provided by the #V bucket of module -/// VPD. -/// -inline fapi2::ReturnCode freq_core_nominal_mhz(uint32_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_FREQ_CORE_NOMINAL_MHZ, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_FREQ_CORE_NOMINAL_MHZ: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_FREQ_CORE_CEILING_MHZ getter -/// @param[out] uint32_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note The maximum core frequency in MHz. This is the same for all cores in the system. -/// Provided by the #V bucket of module VPD and is calculated as the minimum of the -/// turbo -/// frequencies. -/// -inline fapi2::ReturnCode freq_core_ceiling_mhz(uint32_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_FREQ_CORE_CEILING_MHZ, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_FREQ_CORE_CEILING_MHZ: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PM_SAFE_FREQUENCY_MHZ getter -/// @param[out] uint32_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Frequency (in MHz) to move to if the Power Management function fails. This is -/// the same for all cores in the system. Provided by the -/// MRW. -/// -inline fapi2::ReturnCode pm_safe_frequency_mhz(uint32_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PM_SAFE_FREQUENCY_MHZ, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PM_SAFE_FREQUENCY_MHZ: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PM_SAFE_VOLTAGE_MV getter -/// @param[out] uint32_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Voltage (in mV) to move to if the Power Management function fails. Provided by -/// the -/// MRW. -/// -inline fapi2::ReturnCode pm_safe_voltage_mv(uint32_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PM_SAFE_VOLTAGE_MV, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PM_SAFE_VOLTAGE_MV: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_FREQ_PCIE_MHZ getter -/// @param[out] uint32_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note The frequency of a processor's PCI-e bus in MHz. This is the same for all PCI-e -/// busses in the system. Provided by the -/// MRW. -/// -inline fapi2::ReturnCode freq_pcie_mhz(uint32_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_FREQ_PCIE_MHZ, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_FREQ_PCIE_MHZ: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_DD1_SLOW_PCI_REF_CLOCK getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note MRW control to permit Normal (100 MHz) or Slow (94 MHz) operation of PCIE -/// reference clock. On Nimbus DD1 HW, Slow operation is required to achieve Gen4 -/// operation. Provided by the -/// MRW. -/// -inline fapi2::ReturnCode dd1_slow_pci_ref_clock(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_DD1_SLOW_PCI_REF_CLOCK, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_DD1_SLOW_PCI_REF_CLOCK: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PROC_FABRIC_ASYNC_SAFE_MODE getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Set to force all fabric asynchronous boundary crossings into safe -/// mode. -/// -inline fapi2::ReturnCode proc_fabric_async_safe_mode(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PROC_FABRIC_ASYNC_SAFE_MODE, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PROC_FABRIC_ASYNC_SAFE_MODE: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PROC_FABRIC_A_BUS_WIDTH getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Processor SMP A bus width. Provided by the -/// MRW. -/// -inline fapi2::ReturnCode proc_fabric_a_bus_width(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PROC_FABRIC_A_BUS_WIDTH, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PROC_FABRIC_A_BUS_WIDTH: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PROC_FABRIC_X_BUS_WIDTH getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Processor SMP X bus width. Provided by the -/// MRW. -/// -inline fapi2::ReturnCode proc_fabric_x_bus_width(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PROC_FABRIC_X_BUS_WIDTH, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PROC_FABRIC_X_BUS_WIDTH: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PROC_FABRIC_CORE_FLOOR_RATIO getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Processor SMP core floor/nest frequency -/// ratio -/// -inline fapi2::ReturnCode proc_fabric_core_floor_ratio(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PROC_FABRIC_CORE_FLOOR_RATIO, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), - o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PROC_FABRIC_CORE_FLOOR_RATIO: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PROC_FABRIC_CORE_CEILING_RATIO getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Processor SMP core celing/nest frequency -/// ratio -/// -inline fapi2::ReturnCode proc_fabric_core_ceiling_ratio(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PROC_FABRIC_CORE_CEILING_RATIO, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), - o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PROC_FABRIC_CORE_CEILING_RATIO: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PROC_FABRIC_PUMP_MODE getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Processor SMP Fabric broadcast scope configuration. CHIP_IS_NODE = MODE1 = -/// default CHIP_IS_GROUP = MODE2 Provided by the -/// MRW. -/// -inline fapi2::ReturnCode proc_fabric_pump_mode(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PROC_FABRIC_PUMP_MODE, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PROC_FABRIC_PUMP_MODE: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PROC_FABRIC_CCSM_MODE getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Processor SMP topology configuration. 0 = default = 1 or 2 hop topology (PHYP -/// image spans system) Provided by the -/// MRW. -/// -inline fapi2::ReturnCode proc_fabric_ccsm_mode(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PROC_FABRIC_CCSM_MODE, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PROC_FABRIC_CCSM_MODE: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PROC_FABRIC_SMP_OPTICS_MODE getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Processor SMP optics mode. 0 = default = Optics_is_X_bus 1 = Optics_is_A_bus -/// Provided by the -/// MRW. -/// -inline fapi2::ReturnCode proc_fabric_smp_optics_mode(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PROC_FABRIC_SMP_OPTICS_MODE, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PROC_FABRIC_SMP_OPTICS_MODE: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PROC_FABRIC_CAPI_MODE getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Processor CAPI attachement protocol mode. 0 = default = no: SMPA CAPI -/// attachement 1 = yes: SMPA CAPI attachement Provided by the -/// MRW. -/// -inline fapi2::ReturnCode proc_fabric_capi_mode(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PROC_FABRIC_CAPI_MODE, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PROC_FABRIC_CAPI_MODE: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PROC_EPS_GB_PERCENTAGE getter -/// @param[out] int8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Guardband percentage to apply to baseline epsilon calculations Set by -/// p9_fbc_eff_config. -/// -inline fapi2::ReturnCode proc_eps_gb_percentage(int8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PROC_EPS_GB_PERCENTAGE, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PROC_EPS_GB_PERCENTAGE: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PROC_EPS_TABLE_TYPE getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Processor epsilon table type. Used to calculate the processor nest epsilon -/// register values. Provided by the -/// MRW. -/// -inline fapi2::ReturnCode proc_eps_table_type(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PROC_EPS_TABLE_TYPE, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PROC_EPS_TABLE_TYPE: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PROC_EPS_READ_CYCLES_T0 getter -/// @param[out] uint32_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Calculated read tier0 epsilon protection -/// count. -/// -inline fapi2::ReturnCode proc_eps_read_cycles_t0(uint32_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PROC_EPS_READ_CYCLES_T0, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PROC_EPS_READ_CYCLES_T0: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PROC_EPS_READ_CYCLES_T1 getter -/// @param[out] uint32_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Calculated read tier1 epsilon protection -/// count. -/// -inline fapi2::ReturnCode proc_eps_read_cycles_t1(uint32_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PROC_EPS_READ_CYCLES_T1, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PROC_EPS_READ_CYCLES_T1: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PROC_EPS_READ_CYCLES_T2 getter -/// @param[out] uint32_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Calculated read tier2 epsilon protection -/// count. -/// -inline fapi2::ReturnCode proc_eps_read_cycles_t2(uint32_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PROC_EPS_READ_CYCLES_T2, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PROC_EPS_READ_CYCLES_T2: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PROC_EPS_WRITE_CYCLES_T1 getter -/// @param[out] uint32_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Calculated write tier1 epsilon protection -/// count. -/// -inline fapi2::ReturnCode proc_eps_write_cycles_t1(uint32_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PROC_EPS_WRITE_CYCLES_T1, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PROC_EPS_WRITE_CYCLES_T1: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PROC_EPS_WRITE_CYCLES_T2 getter -/// @param[out] uint32_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Calculated write tier2 epsilon protection -/// count. -/// -inline fapi2::ReturnCode proc_eps_write_cycles_t2(uint32_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PROC_EPS_WRITE_CYCLES_T2, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PROC_EPS_WRITE_CYCLES_T2: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_SYSTEM_IPL_PHASE getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Define context for current phase of system -/// IPL. -/// -inline fapi2::ReturnCode system_ipl_phase(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_SYSTEM_IPL_PHASE, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_SYSTEM_IPL_PHASE: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_IS_MPIPL getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Indicates if current IPL is -/// memory-preserving -/// -inline fapi2::ReturnCode is_mpipl(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_IS_MPIPL, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_IS_MPIPL: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PROC_XSCOM_BAR_BASE_ADDR_OFFSET getter -/// @param[out] uint64_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note XSCOM BAR base address offset creator: platform consumer: p9_sbe_scominit -/// firmware notes: Defines 16GB range (size implied) mapped for XSCOM usage -/// Attribute holds offset (relative to chip MMIO origin) to program into chip -/// address range field of BAR -- RA bits 22:29 (excludes system/memory -/// select/group/chip -/// fields) -/// -inline fapi2::ReturnCode proc_xscom_bar_base_addr_offset(uint64_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PROC_XSCOM_BAR_BASE_ADDR_OFFSET, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), - o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PROC_XSCOM_BAR_BASE_ADDR_OFFSET: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PROC_LPC_BAR_BASE_ADDR_OFFSET getter -/// @param[out] uint64_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note LPC BAR base address offset creator: platform consumer: p9_sbe_scominit firmware -/// notes: Defines 4GB range (size implied) mapped for LPC usage Attribute holds -/// offset (relative to chip MMIO origin) to program into chip address range field -/// of BAR -- RA bits 22:31 (excludes system/memory select/group/chip -/// fields) -/// -inline fapi2::ReturnCode proc_lpc_bar_base_addr_offset(uint64_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PROC_LPC_BAR_BASE_ADDR_OFFSET, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), - o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PROC_LPC_BAR_BASE_ADDR_OFFSET: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_MEM_MIRROR_PLACEMENT_POLICY getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Define placement policy/scheme for non-mirrored/mirrored memory layout NORMAL = -/// non-mirrored start: 0, mirrored start: 1024TB FLIPPED = mirrored start: 0, -/// non-mirrored start: 512TB Set by platform. Used by -/// mss_eff_grouping. -/// -inline fapi2::ReturnCode mem_mirror_placement_policy(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_MEM_MIRROR_PLACEMENT_POLICY, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_MEM_MIRROR_PLACEMENT_POLICY: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_MSS_INTERLEAVE_ENABLE getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Used in the setting of groups. It is a bit vector. If the value BITWISE_AND 0x01 -/// = 0x01 then groups of 1 are enabled, if the value BITWISE_AND 0x02 = 0x02, then -/// groups of 2 are possible, if the value BITWISE_AND 0x04 = 0x04, then group of 3 -/// are possible, if the value BITWISE_AND 0x08 = 0x08, then groups of 4 are -/// possible, if the value BITWISE_AND 0x20 = 0x20, then groups of 6 are possible, -/// if the value BITWISE_AND 0x80 = 0x80, then groups of 8 are possible. If no -/// groups can formed according to this input, then an error will be thrown. -/// Provided by the -/// MRW -/// -inline fapi2::ReturnCode mss_interleave_enable(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_MSS_INTERLEAVE_ENABLE, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_MSS_INTERLEAVE_ENABLE: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_MSS_INTERLEAVE_GRANULARITY getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Determines the stride covered by each granule in an interleaving group. The -/// default stride -- 128B -- is the only value intended for production FW use. All -/// other combinations are for experimental performance evaluation. Regardless of -/// this attribute value, groups of size 1, 3, and 6 will be forced to 128B stride -/// based on the logic -/// capabilities. -/// -inline fapi2::ReturnCode mss_interleave_granularity(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_MSS_INTERLEAVE_GRANULARITY, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_MSS_INTERLEAVE_GRANULARITY: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_MRW_HW_MIRRORING_ENABLE getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note TRUE : HW mirroring is enabled. FALSE : HW mirroring is disabled. Provided by -/// the -/// MRW. -/// -inline fapi2::ReturnCode mrw_hw_mirroring_enable(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_MRW_HW_MIRRORING_ENABLE, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_MRW_HW_MIRRORING_ENABLE: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - - -/// -/// @brief ATTR_NEST_PLL_BUCKET getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Select Nest I2C and pll setting from one of the supported -/// frequencies -/// -inline fapi2::ReturnCode nest_pll_bucket(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_NEST_PLL_BUCKET, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_NEST_PLL_BUCKET: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_RISK_LEVEL getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note HWP/Init "risk level" enabled. Used by HB to pass to HB driven -/// HWPs -/// -inline fapi2::ReturnCode risk_level(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_RISK_LEVEL, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_RISK_LEVEL: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_DISABLE_HBBL_VECTORS getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note BootLoader HWP flag to not place 12K exception vectors. This flag is only -/// applicable when security is -/// disabled. -/// -inline fapi2::ReturnCode disable_hbbl_vectors(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_DISABLE_HBBL_VECTORS, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_DISABLE_HBBL_VECTORS: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_BOOT_FLAGS getter -/// @param[out] uint32_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Switch to using a flag to indicate SEEPROM side -/// SBE -/// -inline fapi2::ReturnCode boot_flags(uint32_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_BOOT_FLAGS, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_BOOT_FLAGS: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_SYS_FORCE_ALL_CORES getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Indicate that p9_sbe_select_ex should force selection to ALL good EX chiplets -/// having good cores even if only a single EX chiplet mode is -/// executed. -/// -inline fapi2::ReturnCode sys_force_all_cores(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_SYS_FORCE_ALL_CORES, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_SYS_FORCE_ALL_CORES: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_SECURITY_ENABLE getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Holds the state of Security Access Bit -/// (SAB) -/// -inline fapi2::ReturnCode security_enable(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_SECURITY_ENABLE, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_SECURITY_ENABLE: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_SECURITY_MODE getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note SBE context: If SBE image has ATTR_SECURITY_MODE == 0b1, leave SAB bit as is. -/// Otherwise (ATTR_SECURITY_MODE == 0b0), query mailbox scratch register 3 bit 6 -/// and if set, clear the SAB bit. Non-SBE context: If ATTR_SECURITY_MODE == 0b1, do -/// not attempt to clear the SAB bit via the FSI path. Otherwise (ATTR_SECURITY_MODE -/// == 0b0), attempt to clear the SAB bit via the FSI path. Customer level chips -/// will silently ignore such a request, whereas early lab versions may honor it for -/// debug -/// purposes. -/// -inline fapi2::ReturnCode security_mode(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_SECURITY_MODE, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_SECURITY_MODE: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PIBMEM_REPAIR0 getter -/// @param[out] uint64_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Pibmem repair attribute -/// 0 -/// -inline fapi2::ReturnCode pibmem_repair0(uint64_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PIBMEM_REPAIR0, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PIBMEM_REPAIR0: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PIBMEM_REPAIR1 getter -/// @param[out] uint64_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Pibmem repair attribute -/// 1 -/// -inline fapi2::ReturnCode pibmem_repair1(uint64_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PIBMEM_REPAIR1, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PIBMEM_REPAIR1: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PIBMEM_REPAIR2 getter -/// @param[out] uint64_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Pibmem repair attribute -/// 2 -/// -inline fapi2::ReturnCode pibmem_repair2(uint64_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PIBMEM_REPAIR2, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PIBMEM_REPAIR2: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_SBE_SYS_CONFIG getter -/// @param[out] uint64_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note System Configurtion information - 1 indicates a chip -/// present -/// -inline fapi2::ReturnCode sbe_sys_config(uint64_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_SBE_SYS_CONFIG, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_SBE_SYS_CONFIG: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_CP_REFCLOCK_RCVR_TERM getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Defines system specific value of processor refclock receiver -/// termination -/// -inline fapi2::ReturnCode cp_refclock_rcvr_term(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_CP_REFCLOCK_RCVR_TERM, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_CP_REFCLOCK_RCVR_TERM: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_IO_REFCLOCK_RCVR_TERM getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Defines system specific value of PCI refclock receiver -/// termination -/// -inline fapi2::ReturnCode io_refclock_rcvr_term(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_IO_REFCLOCK_RCVR_TERM, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_IO_REFCLOCK_RCVR_TERM: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_SECTOR_BUFFER_STRENGTH getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Sector buffer -/// strength -/// -inline fapi2::ReturnCode sector_buffer_strength(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_SECTOR_BUFFER_STRENGTH, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_SECTOR_BUFFER_STRENGTH: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PULSE_MODE_ENABLE getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note enable the pulse -/// mode -/// -inline fapi2::ReturnCode pulse_mode_enable(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PULSE_MODE_ENABLE, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PULSE_MODE_ENABLE: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_PULSE_MODE_VALUE getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note value for pulse -/// mode -/// -inline fapi2::ReturnCode pulse_mode_value(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_PULSE_MODE_VALUE, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_PULSE_MODE_VALUE: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_START_CBS_FIFO_RESET_SKIP getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note Allow skipping fifo reset during p9_start_cbs, to enable systems without cfam -/// access to fifo registers -/// (WAFER/RBI). -/// -inline fapi2::ReturnCode start_cbs_fifo_reset_skip(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_START_CBS_FIFO_RESET_SKIP, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_START_CBS_FIFO_RESET_SKIP: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_SYSTEM_CORECACHE_SKEWADJ_DISABLE getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note To allow for selective enablement for lab testing To allow skew function to be -/// enabled/disabled. -/// -inline fapi2::ReturnCode system_corecache_skewadj_disable(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_SYSTEM_CORECACHE_SKEWADJ_DISABLE, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), - o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_SYSTEM_CORECACHE_SKEWADJ_DISABLE: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_SYSTEM_CORECACHE_DCADJ_DISABLE getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note To allow for selective enablement for lab testing To allow dcadj function to be -/// enabled/disabled. -/// -inline fapi2::ReturnCode system_corecache_dcadj_disable(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_SYSTEM_CORECACHE_DCADJ_DISABLE, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), - o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_SYSTEM_CORECACHE_DCADJ_DISABLE: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - -/// -/// @brief ATTR_MC_PLL_BUCKET getter -/// @param[out] uint8_t& reference to store the value -/// @note Generated by gen_accessors.pl generateParameters (SYSTEM) -/// @return fapi2::ReturnCode - FAPI2_RC_SUCCESS iff get is OK -/// @note MC pll bucket selection in async mode for -/// Cumulus -/// -inline fapi2::ReturnCode mc_pll_bucket(uint8_t& o_value) -{ - - FAPI_TRY( FAPI_ATTR_GET(fapi2::ATTR_MC_PLL_BUCKET, fapi2::Target<fapi2::TARGET_TYPE_SYSTEM>(), o_value) ); - return fapi2::current_err; - -fapi_try_exit: - FAPI_ERR("failed accessing ATTR_MC_PLL_BUCKET: 0x%lx (system target)", - uint64_t(fapi2::current_err)); - return fapi2::current_err; -} - } diff --git a/src/import/chips/p9/procedures/xml/attribute_info/chip_ec_attributes.xml b/src/import/chips/p9/procedures/xml/attribute_info/chip_ec_attributes.xml index eb1f6f9db..71074a289 100644 --- a/src/import/chips/p9/procedures/xml/attribute_info/chip_ec_attributes.xml +++ b/src/import/chips/p9/procedures/xml/attribute_info/chip_ec_attributes.xml @@ -3907,6 +3907,24 @@ </chip> </chipEcFeature> </attribute> + + <attribute> + <id>ATTR_CHIP_EC_FEATURE_MSS_PERIODICS</id> + <targetType>TARGET_TYPE_PROC_CHIP</targetType> + <description> + For Nimbus DD1.** turn off periodics by default (zqcal and memcal). + For Nimbus DD2.** it will be attribute driven without any restrictions. + </description> + <chipEcFeature> + <chip> + <name>ENUM_ATTR_NAME_NIMBUS</name> + <ec> + <value>0x20</value> + <test>LESS_THAN</test> + </ec> + </chip> + </chipEcFeature> + </attribute> <!-- ******************************************************************** --> <!-- End Memory Section --> <!-- ******************************************************************** --> diff --git a/src/import/chips/p9/procedures/xml/attribute_info/freq_attributes.xml b/src/import/chips/p9/procedures/xml/attribute_info/freq_attributes.xml index 4d6ad1229..7a1d1e1e1 100644 --- a/src/import/chips/p9/procedures/xml/attribute_info/freq_attributes.xml +++ b/src/import/chips/p9/procedures/xml/attribute_info/freq_attributes.xml @@ -72,6 +72,7 @@ <valueType>uint32</valueType> <array>5</array> <platInit/> + <mssAccessorName>max_allowed_dimm_freq</mssAccessorName> </attribute> <!-- ********************************************************************* --> <attribute> @@ -104,6 +105,7 @@ <valueType>uint8</valueType> <enum>UNDETERMINED=0, ALWAYS=1, NEVER=2</enum> <platInit/> + <mssAccessorName>required_synch_mode</mssAccessorName> </attribute> <!-- ********************************************************************* --> </attributes> diff --git a/src/import/chips/p9/procedures/xml/attribute_info/memory_dq_attributes.xml b/src/import/chips/p9/procedures/xml/attribute_info/memory_dq_attributes.xml index 673346c8c..f15bde923 100644 --- a/src/import/chips/p9/procedures/xml/attribute_info/memory_dq_attributes.xml +++ b/src/import/chips/p9/procedures/xml/attribute_info/memory_dq_attributes.xml @@ -5,7 +5,7 @@ <!-- --> <!-- OpenPOWER HostBoot Project --> <!-- --> -<!-- Contributors Listed Below - COPYRIGHT 2016 --> +<!-- Contributors Listed Below - COPYRIGHT 2016,2017 --> <!-- [+] International Business Machines Corp. --> <!-- --> <!-- --> @@ -52,7 +52,8 @@ All of these details are hidden from the user of this attribute. </description> <valueType>uint8</valueType> - <array>2 2 4 10</array> + <mssAccessorName>bad_dq_bitmap</mssAccessorName> + <array>2 2 4 10</array> <platInit/> <initToZero/> <writeable/> diff --git a/src/import/chips/p9/procedures/xml/attribute_info/nest_attributes.xml b/src/import/chips/p9/procedures/xml/attribute_info/nest_attributes.xml index 6e3e059b4..f456c8464 100644 --- a/src/import/chips/p9/procedures/xml/attribute_info/nest_attributes.xml +++ b/src/import/chips/p9/procedures/xml/attribute_info/nest_attributes.xml @@ -43,6 +43,7 @@ </enum> <writeable/> <platInit/> + <mssAccessorName>freq_pb_mhz</mssAccessorName> </attribute> <!-- ********************************************************************** --> <attribute> diff --git a/src/import/hwpf/fapi2/xml/attribute_info/system_attributes.xml b/src/import/hwpf/fapi2/xml/attribute_info/system_attributes.xml index 865553a88..1c99eeda5 100644 --- a/src/import/hwpf/fapi2/xml/attribute_info/system_attributes.xml +++ b/src/import/hwpf/fapi2/xml/attribute_info/system_attributes.xml @@ -30,6 +30,7 @@ <description>env: 1 = Awan/HWSimulator. 0 = Simics/RealHW.</description> <valueType>uint8</valueType> <platInit/> + <mssAccessorName>is_simulation</mssAccessorName> </attribute> <!-- ********************************************************************* --> <attribute> @@ -77,6 +78,7 @@ --> </enum> <platInit/> + <mssAccessorName>mnfg_flags</mssAccessorName> </attribute> <attribute> <id>ATTR_RECONFIGURE_LOOP</id> @@ -95,4 +97,3 @@ <!-- ********************************************************************* --> </attributes> - |
