diff options
-rw-r--r-- | src/import/chips/p9/procedures/hwp/nest/p9_pcie_config.C | 58 | ||||
-rw-r--r-- | src/import/chips/p9/procedures/hwp/nest/p9_pcie_scominit.C | 13 |
2 files changed, 69 insertions, 2 deletions
diff --git a/src/import/chips/p9/procedures/hwp/nest/p9_pcie_config.C b/src/import/chips/p9/procedures/hwp/nest/p9_pcie_config.C index 0a8ef5c95..de440c49f 100644 --- a/src/import/chips/p9/procedures/hwp/nest/p9_pcie_config.C +++ b/src/import/chips/p9/procedures/hwp/nest/p9_pcie_config.C @@ -74,6 +74,13 @@ const uint64_t PCI_PFIR_ACTION0_REG = 0xB000000000000000ULL; const uint64_t PCI_PFIR_ACTION1_REG = 0xB000000000000000ULL; const uint64_t PCI_PFIR_MASK_REG = 0x0E00000000000000ULL; +// PEC IOVALID constants +const uint8_t PEC0_IOP_IOVALID_PHB0_MASK = 1; +const uint8_t PEC1_IOP_IOVALID_PHB1_MASK = 2; +const uint8_t PEC1_IOP_IOVALID_PHB2_MASK = 1; +const uint8_t PEC2_IOP_IOVALID_PHB3_MASK = 4; +const uint8_t PEC2_IOP_IOVALID_PHB4_MASK = 2; +const uint8_t PEC2_IOP_IOVALID_PHB5_MASK = 1; //------------------------------------------------------------------------------ // Function definitions @@ -93,6 +100,9 @@ fapi2::ReturnCode p9_pcie_config( fapi2::Target<fapi2::TARGET_TYPE_SYSTEM> FAPI_SYSTEM; fapi2::buffer<uint64_t> l_buf = 0; + uint8_t pec0_iovalid_bits = 0; + uint8_t pec1_iovalid_bits = 0; + uint8_t pec2_iovalid_bits = 0; uint8_t l_attr_proc_pcie_iovalid_enable = 0; std::vector<uint64_t> l_base_addr_nm0, l_base_addr_nm1, l_base_addr_m; uint64_t l_base_addr_mmio; @@ -163,6 +173,21 @@ fapi2::ReturnCode p9_pcie_config( l_attr_proc_pcie_iovalid_enable)); FAPI_DBG("l_attr_proc_pcie_iovalid_enable: %#x", l_attr_proc_pcie_iovalid_enable); + if (l_pec_id == 0) + { + pec0_iovalid_bits = l_attr_proc_pcie_iovalid_enable; + } + + if (l_pec_id == 1) + { + pec1_iovalid_bits = l_attr_proc_pcie_iovalid_enable; + } + + if (l_pec_id == 2) + { + pec2_iovalid_bits = l_attr_proc_pcie_iovalid_enable; + } + // configure extended addressing facility if (l_extended_addressing_mode) { @@ -278,7 +303,7 @@ fapi2::ReturnCode p9_pcie_config( l_buf.setBit<PEC_PBAIBHWCFG_REG_PE_PCIE_CLK_TRACE_EN>(); l_buf.insertFromRight<PEC_PBAIBHWCFG_REG_PE_OSMB_HOL_BLK_CNT, PEC_PBAIBHWCFG_REG_PE_OSMB_HOL_BLK_CNT_LEN>(PEC_AIB_HWCFG_OSBM_HOL_BLK_CNT); - FAPI_DBG("PECc%i: %#lx", l_pec_id, l_buf()); + FAPI_DBG("PEC%i: %#lx", l_pec_id, l_buf()); FAPI_TRY(fapi2::putScom(l_pec_chiplet, PEC_PBAIBHWCFG_REG, l_buf)); } @@ -297,6 +322,37 @@ fapi2::ReturnCode p9_pcie_config( l_phb_id), "Error from FAPI_ATTR_GET (ATTR_CHIP_UNIT_POS)"); + // Initialize PHBs with IOVALID set (SW417485) + if ((l_phb_id == 0) && !(pec0_iovalid_bits & PEC0_IOP_IOVALID_PHB0_MASK)) + { + continue; + } + + if ((l_phb_id == 1) && !(pec1_iovalid_bits & PEC1_IOP_IOVALID_PHB1_MASK)) + { + continue; + } + + if ((l_phb_id == 2) && !(pec1_iovalid_bits & PEC1_IOP_IOVALID_PHB2_MASK)) + { + continue; + } + + if ((l_phb_id == 3) && !(pec2_iovalid_bits & PEC2_IOP_IOVALID_PHB3_MASK)) + { + continue; + } + + if ((l_phb_id == 4) && !(pec2_iovalid_bits & PEC2_IOP_IOVALID_PHB4_MASK)) + { + continue; + } + + if ((l_phb_id == 5) && !(pec2_iovalid_bits & PEC2_IOP_IOVALID_PHB5_MASK)) + { + continue; + } + if (!l_hw363246) { // Phase2 init step 12_a diff --git a/src/import/chips/p9/procedures/hwp/nest/p9_pcie_scominit.C b/src/import/chips/p9/procedures/hwp/nest/p9_pcie_scominit.C index 84b4573ff..ac00d7e61 100644 --- a/src/import/chips/p9/procedures/hwp/nest/p9_pcie_scominit.C +++ b/src/import/chips/p9/procedures/hwp/nest/p9_pcie_scominit.C @@ -5,7 +5,7 @@ /* */ /* OpenPOWER HostBoot Project */ /* */ -/* Contributors Listed Below - COPYRIGHT 2015,2017 */ +/* Contributors Listed Below - COPYRIGHT 2015,2018 */ /* [+] International Business Machines Corp. */ /* */ /* */ @@ -64,6 +64,9 @@ const uint8_t PEC2_IOP_SWAP_START_BIT = 7; const uint8_t PEC0_IOP_IOVALID_ENABLE_START_BIT = 4; const uint8_t PEC1_IOP_IOVALID_ENABLE_START_BIT = 4; const uint8_t PEC2_IOP_IOVALID_ENABLE_START_BIT = 4; +const uint8_t PEC_IOP_IOVALID_ENABLE_STACK0_BIT = 4; +const uint8_t PEC_IOP_IOVALID_ENABLE_STACK1_BIT = 5; +const uint8_t PEC_IOP_IOVALID_ENABLE_STACK2_BIT = 6; const uint8_t PEC_IOP_REFCLOCK_ENABLE_START_BIT = 32; const uint8_t PEC_IOP_PMA_RESET_START_BIT = 29; const uint8_t PEC_IOP_PIPE_RESET_START_BIT = 28; @@ -257,6 +260,14 @@ fapi2::ReturnCode p9_pcie_scominit(const fapi2::Target<fapi2::TARGET_TYPE_PROC_C PEC1_IOP_IOVALID_ENABLE_START_BIT, PEC1_IOP_BIT_COUNT, PEC2_IOP_IOVALID_ENABLE_START_BIT, PEC2_IOP_BIT_COUNT)); FAPI_DBG("pec%i: %#lx", l_pec_id, l_buf()); + + // Set IOVALID for base PHB if PHB2, or PHB4, or PHB5 are set (SW417485) + if ((l_buf.getBit(PEC_IOP_IOVALID_ENABLE_STACK1_BIT)) || (l_buf.getBit(PEC_IOP_IOVALID_ENABLE_STACK2_BIT))) + { + l_buf.setBit<PEC_IOP_IOVALID_ENABLE_STACK0_BIT>(); + } + + FAPI_DBG("pec%i: %#lx", l_pec_id, l_buf()); FAPI_TRY(fapi2::putScom(l_pec_chiplets, PEC_CPLT_CONF1_OR, l_buf), "Error from putScom (0x%.16llX), PEC_CPLT_CONF1_OR"); |