Add More Attribute Support for I2C and EEPROM Drivers

This commit adds more attribute fields to be used in the
EEPROM device drivers.  The I2C device driver is also being
updated so that it can eventually get the desired bus speed
from an attribute, as well.

Change-Id: I6b609cafdd7ea3b015a4f62009297e0149ba5b84
RTC: 72715
Reviewed-on: http://gfw160.austin.ibm.com:8080/gerrit/6116
Tested-by: Jenkins Server
Reviewed-by: A. Patrick Williams III <iawillia@us.ibm.com>

11 files changed, 1556 insertions, 607 deletions

diff --git a/src/usr/i2c/eepromdd.C b/src/usr/i2c/eepromdd.C
index f734b66cc..8ea9b94c1 100755
--- a/src/usr/i2c/eepromdd.C
+++ b/src/usr/i2c/eepromdd.C
@@ -38,10 +38,10 @@
 #include <trace/interface.H>
 #include <errl/errlentry.H>
 #include <errl/errlmanager.H>
+#include <errl/errludtarget.H>
 #include <targeting/common/targetservice.H>
 #include <devicefw/driverif.H>
 #include <i2c/eepromddreasoncodes.H>
-
 #include <i2c/eepromif.H>
 #include "eepromdd.H"
 
@@ -90,6 +90,7 @@ DEVICE_REGISTER_ROUTE( DeviceFW::WILDCARD,
                        TARGETING::TYPE_MEMBUF,
                        eepromPerformOp );
 
+
 // ------------------------------------------------------------------
 // eepromPerformOp
 // ------------------------------------------------------------------
@@ -103,7 +104,6 @@ errlHndl_t eepromPerformOp( DeviceFW::OperationType i_opType,
     errlHndl_t err = NULL;
     TARGETING::Target * theTarget = NULL;
     eeprom_addr_t i2cInfo;
-    i2cInfo.deviceType = LAST_DEVICE_TYPE;
 
     i2cInfo.chip = va_arg( i_args, uint64_t );
     i2cInfo.offset = va_arg( i_args, uint64_t );
@@ -138,6 +138,38 @@ errlHndl_t eepromPerformOp( DeviceFW::OperationType i_opType,
             break;
         }
 
+        // Check that the offset + data length is less than device max size
+        if ( ( i2cInfo.offset + io_buflen ) >
+             ( i2cInfo.devSize_KB * KILOBYTE  ) )
+        {
+            TRACFCOMP( g_trac_eeprom,
+                       ERR_MRK"eepromPerformOp(): Device Overflow! "
+                       "C-p/e/dA=%d-%d/%d/0x%X, offset=0x%X, len=0x%X "
+                       "devSizeKB=0x%X", i2cInfo.chip, i2cInfo.port,
+                       i2cInfo.engine, i2cInfo.devAddr, i2cInfo.offset,
+                       io_buflen, i2cInfo.devSize_KB);
+
+
+            /*@
+             * @errortype
+             * @reasoncode       EEPROM_OVERFLOW_ERROR
+             * @severity         ERRL_SEV_UNRECOVERABLE
+             * @moduleid         EEPROM_PERFORM_OP
+             * @userdata1[0:31]  Offset
+             * @userdata1[32:63] Buffer Length
+             * @userdata2        Device Max Size (in KB)
+             * @devdesc          I2C Buffer Length + Offset > Max Size
+             */
+            err = new ERRORLOG::ErrlEntry( ERRORLOG::ERRL_SEV_UNRECOVERABLE,
+                                           EEPROM_PERFORM_OP,
+                                           EEPROM_OVERFLOW_ERROR,
+                                           TWO_UINT32_TO_UINT64(
+                                               i2cInfo.offset,
+                                               io_buflen       ),
+                                           i2cInfo.devSize_KB );
+            break;
+        }
+
         // Do the read or write
         if( i_opType == DeviceFW::READ )
         {
@@ -187,6 +219,13 @@ errlHndl_t eepromPerformOp( DeviceFW::OperationType i_opType,
         }
     } while( 0 );
 
+
+    // If there is an error, add target to log
+    if ( (err != NULL) && (i_target != NULL) )
+    {
+        ERRORLOG::ErrlUserDetailsTarget(i_target).addToLog(err);
+    }
+
     TRACDCOMP( g_trac_eeprom,
                EXIT_MRK"eepromPerformOp() - %s",
                ((NULL == err) ? "No Error" : "With Error") );
@@ -250,7 +289,7 @@ errlHndl_t eepromRead ( TARGETING::Target * i_target,
             {
                 TRACFCOMP(g_trac_eeprom,
                           ERR_MRK"eepromRead(): I2C Read-Offset failed on "
-                          "%d/%d/0x%x",
+                          "%d/%d/0x%X",
                           i_i2cInfo.port, i_i2cInfo.engine, i_i2cInfo.devAddr);
                 break;
             }
@@ -269,7 +308,7 @@ errlHndl_t eepromRead ( TARGETING::Target * i_target,
             if( err )
             {
                 TRACFCOMP(g_trac_eeprom,
-                          ERR_MRK"eepromRead(): I2C Read failed on %d/%d/0x%x",
+                          ERR_MRK"eepromRead(): I2C Read failed on %d/%d/0x%0X",
                           i_i2cInfo.port, i_i2cInfo.engine, i_i2cInfo.devAddr);
                 break;
             }
@@ -312,7 +351,6 @@ errlHndl_t eepromWrite ( TARGETING::Target * i_target,
     uint8_t * newBuffer = NULL;
     bool needFree = false;
     bool unlock = false;
-    eeprom_addr_t l_i2cInfo = i_i2cInfo;
 
     TRACDCOMP( g_trac_eeprom,
                ENTER_MRK"eepromWrite()" );
@@ -337,8 +375,8 @@ errlHndl_t eepromWrite ( TARGETING::Target * i_target,
         // EEPROM devices have write page boundaries, so when necessary
         // need to split up command into multiple write operations
 
-        // Setup a max-size buffer of byteAddrSize + writePageSize
-        size_t newBufLen = byteAddrSize + i_i2cInfo.writePageSize;
+        // Setup a max-size buffer of writePageSize
+        size_t newBufLen = i_i2cInfo.writePageSize;
         newBuffer = static_cast<uint8_t*>(malloc( newBufLen ));
         needFree = true;
 
@@ -351,7 +389,6 @@ errlHndl_t eepromWrite ( TARGETING::Target * i_target,
 
         // variables to store different amount of data length
         size_t loop_data_length = 0;
-        size_t loop_buffer_length = 0;
         size_t total_bytes_written = 0;
 
         for ( uint64_t i = 0 ;
@@ -372,55 +409,56 @@ errlHndl_t eepromWrite ( TARGETING::Target * i_target,
                 loop_data_length = io_buflen % i_i2cInfo.writePageSize;
             }
 
-            // Update the offset for each loop
-            l_i2cInfo.offset += i * i_i2cInfo.writePageSize;
+            // Add the data the user wanted to write
+            memcpy( newBuffer,
+                    &l_data_ptr[i * i_i2cInfo.writePageSize],
+                    loop_data_length);
+
 
-            err = eepromPrepareAddress( &byteAddr,
-                                        byteAddrSize,
-                                        l_i2cInfo );
 
-            if (err)
+            // Update the offset for each loop after the first one
+            if ( i > 0 )
             {
-                break;
+                i_i2cInfo.offset += i_i2cInfo.writePageSize;
             }
 
-            // Add the byte address to the buffer
-            memcpy( newBuffer,
-                    byteAddr,
-                    byteAddrSize );
+            // Setup offset/address parms
+            err = eepromPrepareAddress(  &byteAddr,
+                                         byteAddrSize,
+                                         i_i2cInfo );
 
-            // Now add the data the user wanted to write
-            memcpy( &newBuffer[byteAddrSize],
-                    &l_data_ptr[i * i_i2cInfo.writePageSize],
-                    loop_data_length);
+            if( err )
+            {
+                break;
+            }
 
-            // Calculate Total Length
-            loop_buffer_length = loop_data_length + byteAddrSize;
 
-            TRACUCOMP(g_trac_eeprom,"eepromWrite() Loop: %d/%d/0x%x "
-                "loop=%d, l_b_l=%d, l_d_l=%d, offset=0x%x",
-                i_i2cInfo.port, i_i2cInfo.engine,
-                i_i2cInfo.devAddr, i, loop_buffer_length, loop_data_length,
-                l_i2cInfo.offset);
+            TRACUCOMP(g_trac_eeprom,"eepromWrite() Loop: %d/%d/0x%X "
+                "loop=%d, l_d_l=%d, offset=0x%X, bAS=%d",
+                i_i2cInfo.port, i_i2cInfo.engine, i_i2cInfo.devAddr,
+                i, loop_data_length, i_i2cInfo.offset, byteAddrSize);
 
 
             // Do the actual data write
             err = deviceOp( DeviceFW::WRITE,
                             i_target,
                             newBuffer,
-                            loop_buffer_length,
-                            DEVICE_I2C_ADDRESS( i_i2cInfo.port,
-                                                i_i2cInfo.engine,
-                                                i_i2cInfo.devAddr ) );
+                            loop_data_length,
+                            DEVICE_I2C_ADDRESS_OFFSET(
+                                               i_i2cInfo.port,
+                                               i_i2cInfo.engine,
+                                               i_i2cInfo.devAddr,
+                                               byteAddrSize,
+                                               reinterpret_cast<uint8_t*>(
+                                               &byteAddr)));
 
             if( err )
             {
                 TRACFCOMP(g_trac_eeprom,
-                    ERR_MRK"eepromWrite(): I2C Write failed on %d/%d/0x%x "
-                    "loop=%d, l_b_l=%d, offset=0x%x",
-                    i_i2cInfo.port, i_i2cInfo.engine,
-                    i_i2cInfo.devAddr, i, loop_buffer_length, l_i2cInfo.offset);
-
+                    ERR_MRK"eepromWrite(): I2C Write failed on %d/%d/0x%X "
+                    "loop=%d, l_d_l=%d, offset=0x%X, aS=%d",
+                    i_i2cInfo.port, i_i2cInfo.engine, i_i2cInfo.devAddr, i,
+                    loop_data_length, i_i2cInfo.offset, i_i2cInfo.addrSize);
 
                 // Can't assume that anything was written if
                 // there was an error, so no update to total_bytes_written
@@ -430,7 +468,8 @@ errlHndl_t eepromWrite ( TARGETING::Target * i_target,
 
             // Update how much data was written
             total_bytes_written += loop_data_length;
-        }
+
+        } // end of write for-loop
 
         // Release mutex lock
         mutex_unlock( &g_eepromMutex );
@@ -473,7 +512,7 @@ errlHndl_t eepromWrite ( TARGETING::Target * i_target,
 // ------------------------------------------------------------------
 // eepromPrepareAddress
 // ------------------------------------------------------------------
-errlHndl_t eepromPrepareAddress ( void * o_buffer,
+errlHndl_t eepromPrepareAddress ( void * io_buffer,
                                   size_t & o_bufSize,
                                   eeprom_addr_t i_i2cInfo )
 {
@@ -486,57 +525,53 @@ errlHndl_t eepromPrepareAddress ( void * o_buffer,
 
     do
     {
+
         // --------------------------------------------------------------------
-        // @todo RTC:72715 - support different I2C devices and the way
-        // they handle addressing.  A new attribute will need to be added to
-        // EEPROM_ADDR_INFOx to indicate the device type so the addressing
-        // here can be handled properly.
-        //
-        // Until we get a different device, we'll just code for the 2 examples
-        // that I know of now.
+        // Currently only supporting I2C devices and that use 0, 1, or 2 bytes
+        // to set the offset (ie, internal address) into the device.
         // --------------------------------------------------------------------
-        switch( i_i2cInfo.deviceType )
+        switch( i_i2cInfo.addrSize )
         {
             case TWO_BYTE_ADDR:
                 o_bufSize = 2;
-                memset( o_buffer, 0x0, o_bufSize );
-                *((uint8_t*)o_buffer) = (i_i2cInfo.offset & 0xFF00ull) >> 8;
-                *((uint8_t*)o_buffer+1) = (i_i2cInfo.offset & 0x00FFull);
+                memset( io_buffer, 0x0, o_bufSize );
+                *((uint8_t*)io_buffer) = (i_i2cInfo.offset & 0xFF00ull) >> 8;
+                *((uint8_t*)io_buffer+1) = (i_i2cInfo.offset & 0x00FFull);
                 break;
 
             case ONE_BYTE_ADDR:
                 o_bufSize = 1;
-                memset( o_buffer, 0x0, o_bufSize );
-                *((uint8_t*)o_buffer) = (i_i2cInfo.offset & 0xFFull);
+                memset( io_buffer, 0x0, o_bufSize );
+                *((uint8_t*)io_buffer) = (i_i2cInfo.offset & 0xFFull);
+                break;
+
+            case ZERO_BYTE_ADDR:
+                o_bufSize = 0;
+                // nothing to do with the buffer in this case
                 break;
 
             default:
                 TRACFCOMP( g_trac_eeprom,
-                           ERR_MRK"eepromPrepareAddress() - Invalid device type: %08x",
-                           i_i2cInfo.deviceType );
+                           ERR_MRK"eepromPrepareAddress() - Invalid Device "
+                           "Address Size: 0x%08x", i_i2cInfo.addrSize);
 
                 /*@
                  * @errortype
                  * @reasoncode       EEPROM_INVALID_DEVICE_TYPE
                  * @severity         ERRL_SEV_UNRECOVERABLE
                  * @moduleid         EEPROM_PREPAREADDRESS
-                 * @userdata1        Device Type
+                 * @userdata1        Address Size (aka Device Type)
                  * @userdata2        EEPROM chip
-                 * @devdesc          The Device type was not recognized as one supported.
+                 * @devdesc          The Device type not supported (addrSize)
                  */
                 err = new ERRORLOG::ErrlEntry( ERRORLOG::ERRL_SEV_UNRECOVERABLE,
                                                EEPROM_PREPAREADDRESS,
                                                EEPROM_INVALID_DEVICE_TYPE,
-                                               i_i2cInfo.deviceType,
-                                               i_i2cInfo.chip );
-
+                                               i_i2cInfo.addrSize,
+                                               i_i2cInfo.chip);
                 break;
-        };
-
-        if( err )
-        {
-            break;
         }
+
     } while( 0 );
 
     TRACDCOMP( g_trac_eeprom,
@@ -553,227 +588,174 @@ errlHndl_t eepromReadAttributes ( TARGETING::Target * i_target,
                                   eeprom_addr_t & o_i2cInfo )
 {
     errlHndl_t err = NULL;
+    bool fail_reading_attribute = false;
 
     TRACDCOMP( g_trac_eeprom,
                ENTER_MRK"eepromReadAttributes()" );
 
+    // These variables will be used to hold the EEPROM attribute data
+    // Note:  each 'EepromVpd' struct is kept the same via the attributes
+    //        so will be copying each to eepromData to save code space
+    TARGETING::EepromVpdPrimaryInfo eepromData;
+
     do
     {
-        if( VPD_PRIMARY == o_i2cInfo.chip )
+
+        switch (o_i2cInfo.chip )
         {
-            // Read Attributes from EEPROM_VPD_PRIMARY_INFO
-            TARGETING::EepromVpdPrimaryInfo eepromData;
-            if( i_target->tryGetAttr<TARGETING::ATTR_EEPROM_VPD_PRIMARY_INFO>
-                                    ( eepromData ) )
-            {
-                o_i2cInfo.chipTypeEnum = VPD_PRIMARY;
-                o_i2cInfo.port = eepromData.port;
-                o_i2cInfo.devAddr = eepromData.devAddr;
-                o_i2cInfo.engine = eepromData.engine;
-                o_i2cInfo.i2cMasterPath = eepromData.i2cMasterPath;
+            case VPD_PRIMARY:
+                if( !( i_target->
+                         tryGetAttr<TARGETING::ATTR_EEPROM_VPD_PRIMARY_INFO>
+                             ( eepromData ) ) )
+
+                {
+                    fail_reading_attribute = true;
+                }
+                break;
 
-                // @todo RTC:72715 - More attributes to be read
-                o_i2cInfo.deviceType = TWO_BYTE_ADDR;
-                o_i2cInfo.writePageSize = 128;
+            case VPD_BACKUP:
 
-            }
-            else
-            {
-                TRACFCOMP( g_trac_eeprom,
-                           ERR_MRK"eepromReadAttributes() - ERROR reading "
-                           "attributes for chip %d! (VPD_PRIMARY)",
-                           o_i2cInfo.chip );
+                if( !(i_target->
+                        tryGetAttr<TARGETING::ATTR_EEPROM_VPD_BACKUP_INFO>
+                        ( reinterpret_cast<
+                            TARGETING::ATTR_EEPROM_VPD_BACKUP_INFO_type&>
+                                ( eepromData) ) ) )
+                {
+                    fail_reading_attribute = true;
+                }
+                break;
 
-                /*@
-                 * @errortype
-                 * @reasoncode       EEPROM_VPD_PRIMARY_INFO_NOT_FOUND
-                 * @severity         ERRORLOG::ERRL_SEV_UNRECOVERABLE
-                 * @moduleid         EEPROM_READATTRIBUTES
-                 * @userdata1        HUID of target
-                 * @userdata2[0:31]  EEPROM chip
-                 * @userdata2[32:63] Attribute Enumeration
-                 * @devdesc          ATTR_EEPROM_VPD_PRIMARY_INFO Attribute
-                 *                   was not found
-                 */
-                err = new ERRORLOG::ErrlEntry(
-                                    ERRORLOG::ERRL_SEV_UNRECOVERABLE,
-                                    EEPROM_READATTRIBUTES,
-                                    EEPROM_VPD_PRIMARY_INFO_NOT_FOUND,
-                                    TARGETING::get_huid(i_target),
-                                    TWO_UINT32_TO_UINT64(
-                                      o_i2cInfo.chip,
-                                      TARGETING::ATTR_EEPROM_VPD_PRIMARY_INFO));
+            case SBE_PRIMARY:
+                if( !(i_target->
+                        tryGetAttr<TARGETING::ATTR_EEPROM_SBE_PRIMARY_INFO>
+                        ( reinterpret_cast<
+                            TARGETING::ATTR_EEPROM_SBE_PRIMARY_INFO_type&>
+                                ( eepromData) ) ) )
+                {
+                    fail_reading_attribute = true;
+                }
+                break;
+
+            case SBE_BACKUP:
 
+                if( (!i_target->
+                        tryGetAttr<TARGETING::ATTR_EEPROM_SBE_BACKUP_INFO>
+                        ( reinterpret_cast<
+                            TARGETING::ATTR_EEPROM_SBE_BACKUP_INFO_type&>
+                                ( eepromData) ) ) )
+                {
+                    fail_reading_attribute = true;
+                }
                 break;
-            }
-        }
-        else if( VPD_BACKUP == o_i2cInfo.chip )
-        {
-            // Read Attributes from EEPROM_VPD_BACKUP_INFO
-            TARGETING::EepromVpdBackupInfo eepromData;
-            if( i_target->tryGetAttr<TARGETING::ATTR_EEPROM_VPD_BACKUP_INFO>
-                                    ( eepromData ) )
-            {
-                o_i2cInfo.chipTypeEnum = VPD_BACKUP;
-                o_i2cInfo.port = eepromData.port;
-                o_i2cInfo.devAddr = eepromData.devAddr;
-                o_i2cInfo.engine = eepromData.engine;
-                o_i2cInfo.i2cMasterPath = eepromData.i2cMasterPath;
-
-                // @todo RTC:72715 - More attributes to be read
-                o_i2cInfo.deviceType = TWO_BYTE_ADDR;
-                o_i2cInfo.writePageSize = 128;
-            }
-            else
-            {
-                TRACFCOMP( g_trac_eeprom,
-                           ERR_MRK"eepromReadAttributes() - ERROR reading "
-                           "attributes for chip %d! (VPD_BACKUP)",
-                           o_i2cInfo.chip );
+
+            default:
+                TRACFCOMP( g_trac_eeprom,ERR_MRK"eepromReadAttributes() - "
+                           "Invalid chip (%d) to read attributes from!",
+                            o_i2cInfo.chip );
 
                 /*@
                  * @errortype
-                 * @reasoncode       EEPROM_VPD_BACKUP_INFO_NOT_FOUND
+                 * @reasoncode       EEPROM_INVALID_CHIP
                  * @severity         ERRORLOG::ERRL_SEV_UNRECOVERABLE
                  * @moduleid         EEPROM_READATTRIBUTES
-                 * @userdata1        HUID of target
-                 * @userdata2[0:31]  EEPROM chip
-                 * @userdata2[32:63] Attribute Enumeration
-                 * @devdesc          ATTR_EEPROM_VPD_BACKUP_INFO Attribute
-                 *                   was not found
+                 * @userdata1        EEPROM Chip
+                 * @userdata2        HUID of target
+                 * @devdesc          Invalid EEPROM chip to access
                  */
-                err = new ERRORLOG::ErrlEntry(
-                                    ERRORLOG::ERRL_SEV_UNRECOVERABLE,
-                                    EEPROM_READATTRIBUTES,
-                                    EEPROM_VPD_BACKUP_INFO_NOT_FOUND,
-                                    TARGETING::get_huid(i_target),
-                                    TWO_UINT32_TO_UINT64(
-                                      o_i2cInfo.chip,
-                                      TARGETING::ATTR_EEPROM_VPD_PRIMARY_INFO));
+                err = new ERRORLOG::ErrlEntry(ERRORLOG::ERRL_SEV_UNRECOVERABLE,
+                                           EEPROM_READATTRIBUTES,
+                                           EEPROM_INVALID_CHIP,
+                                           o_i2cInfo.chip,
+                                           TARGETING::get_huid(i_target) );
 
                 break;
-            }
         }
-        else if( SBE_PRIMARY == o_i2cInfo.chip )
+
+        // Check if Attribute Data was found
+        if( fail_reading_attribute == true )
         {
-            // Read Attributes from EEPROM_SBE_PRIMARY_INFO
-            TARGETING::EepromSbePrimaryInfo eepromData;
-            if( i_target->tryGetAttr<TARGETING::ATTR_EEPROM_SBE_PRIMARY_INFO>
-                                    ( eepromData ) )
-            {
-                o_i2cInfo.chipTypeEnum = SBE_PRIMARY;
-                o_i2cInfo.port = eepromData.port;
-                o_i2cInfo.devAddr = eepromData.devAddr;
-                o_i2cInfo.engine = eepromData.engine;
-                o_i2cInfo.i2cMasterPath = eepromData.i2cMasterPath;
-
-                // @todo RTC:72715 - More attributes to be read
-                o_i2cInfo.deviceType = TWO_BYTE_ADDR;
-                o_i2cInfo.writePageSize = 128;
-            }
-            else
-            {
-                TRACFCOMP( g_trac_eeprom,
-                           ERR_MRK"eepromReadAttributes() - ERROR reading "
-                           "attributes for chip %d! (SBE_PRIMARY)",
-                           o_i2cInfo.chip );
+            TRACFCOMP( g_trac_eeprom,
+                       ERR_MRK"eepromReadAttributes() - ERROR reading "
+                       "attributes for chip %d!",
+                       o_i2cInfo.chip );
 
                 /*@
                  * @errortype
-                 * @reasoncode       EEPROM_SBE_PRIMARY_INFO_NOT_FOUND
+                 * @reasoncode       EEPROM_ATTR_INFO_NOT_FOUND
                  * @severity         ERRORLOG::ERRL_SEV_UNRECOVERABLE
                  * @moduleid         EEPROM_READATTRIBUTES
                  * @userdata1        HUID of target
-                 * @userdata2[0:31]  EEPROM chip
-                 * @userdata2[32:63] Attribute Enumeration
-                 * @devdesc          ATTR_EEPROM_SBE_PRIMARY_INFO Attribute
-                 *                   was not found
+                 * @userdata2        EEPROM chip
+                 * @devdesc          EEPROM Attribute was not found
                  */
                 err = new ERRORLOG::ErrlEntry(
                                     ERRORLOG::ERRL_SEV_UNRECOVERABLE,
                                     EEPROM_READATTRIBUTES,
-                                    EEPROM_SBE_PRIMARY_INFO_NOT_FOUND,
+                                    EEPROM_ATTR_INFO_NOT_FOUND,
                                     TARGETING::get_huid(i_target),
-                                    TWO_UINT32_TO_UINT64(
-                                      o_i2cInfo.chip,
-                                      TARGETING::ATTR_EEPROM_VPD_PRIMARY_INFO));
+                                    o_i2cInfo.chip);
 
                 break;
-            }
+
+        }
+
+        // Successful reading of Attribute, so extract the data
+        o_i2cInfo.port          = eepromData.port;
+        o_i2cInfo.devAddr       = eepromData.devAddr;
+        o_i2cInfo.engine        = eepromData.engine;
+        o_i2cInfo.i2cMasterPath = eepromData.i2cMasterPath;
+        o_i2cInfo.writePageSize = eepromData.writePageSize;
+        o_i2cInfo.devSize_KB    = eepromData.maxMemorySizeKB;
+
+        // Convert attribute info to eeprom_addr_size_t enum
+        if ( eepromData.byteAddrOffset == 0x2 )
+        {
+            o_i2cInfo.addrSize = TWO_BYTE_ADDR;
         }
-        else if( SBE_BACKUP == o_i2cInfo.chip )
+        else if ( eepromData.byteAddrOffset == 0x1 )
         {
-            // Read Attributes from EEPROM_SBE_BACKUP_INFO
-            TARGETING::EepromSbeBackupInfo eepromData;
-            if( i_target->tryGetAttr<TARGETING::ATTR_EEPROM_SBE_BACKUP_INFO>
-                                    ( eepromData ) )
-            {
-                o_i2cInfo.chipTypeEnum = SBE_BACKUP;
-                o_i2cInfo.port = eepromData.port;
-                o_i2cInfo.devAddr = eepromData.devAddr;
-                o_i2cInfo.engine = eepromData.engine;
-                o_i2cInfo.i2cMasterPath = eepromData.i2cMasterPath;
-
-                // @todo RTC:72715 - More attributes to be read
-                o_i2cInfo.deviceType = TWO_BYTE_ADDR;
-                o_i2cInfo.writePageSize = 128;
-            }
-            else
-            {
-                TRACFCOMP( g_trac_eeprom,
-                           ERR_MRK"eepromReadAttributes() - ERROR reading "
-                           "attributes for chip %d! (SBE_BACKUP)",
-                           o_i2cInfo.chip );
+            o_i2cInfo.addrSize = ONE_BYTE_ADDR;
+        }
+        else if ( eepromData.byteAddrOffset == 0x0 )
+        {
+            o_i2cInfo.addrSize = ZERO_BYTE_ADDR;
+        }
+        else
+        {
+            TRACFCOMP( g_trac_eeprom,
+                       ERR_MRK"eepromReadAttributes() - INVALID ADDRESS "
+                       "OFFSET SIZE %d!",
+                       o_i2cInfo.addrSize );
 
                 /*@
                  * @errortype
-                 * @reasoncode       EEPROM_SBE_BACKUP_INFO_NOT_FOUND
+                 * @reasoncode       EEPROM_INVALID_ADDR_OFFSET_SIZE
                  * @severity         ERRORLOG::ERRL_SEV_UNRECOVERABLE
                  * @moduleid         EEPROM_READATTRIBUTES
                  * @userdata1        HUID of target
-                 * @userdata2[0:31]  EEPROM chip
-                 * @userdata2[32:63] Attribute Enumeration
-                 * @devdesc          ATTR_EEPROM_SBE_BACKUP_INFO Attribute
-                 *                   was not found
+                 * @userdata2        Address Offset Size
+                 * @devdesc          Invalid Address Offset Size
                  */
                 err = new ERRORLOG::ErrlEntry(
                                     ERRORLOG::ERRL_SEV_UNRECOVERABLE,
                                     EEPROM_READATTRIBUTES,
-                                    EEPROM_SBE_BACKUP_INFO_NOT_FOUND,
+                                    EEPROM_INVALID_ADDR_OFFSET_SIZE,
                                     TARGETING::get_huid(i_target),
-                                    TWO_UINT32_TO_UINT64(
-                                      o_i2cInfo.chip,
-                                      TARGETING::ATTR_EEPROM_VPD_PRIMARY_INFO));
+                                    o_i2cInfo.addrSize);
 
                 break;
-            }
-        }
-        else
-        {
-            TRACFCOMP( g_trac_eeprom,
-                       ERR_MRK"eepromReadAttributes() - Invalid chip (%d) to read "
-                       "attributes from!",
-                       o_i2cInfo.chip );
-
-            /*@
-             * @errortype
-             * @reasoncode       EEPROM_INVALID_CHIP
-             * @severity         ERRORLOG::ERRL_SEV_UNRECOVERABLE
-             * @moduleid         EEPROM_READATTRIBUTES
-             * @userdata1        EEPROM Chip
-             * @userdata2        HUID of target
-             * @devdesc          Invalid EEPROM chip to access
-             */
-            err = new ERRORLOG::ErrlEntry( ERRORLOG::ERRL_SEV_UNRECOVERABLE,
-                                           EEPROM_READATTRIBUTES,
-                                           EEPROM_INVALID_CHIP,
-                                           o_i2cInfo.chip,
-                                           TARGETING::get_huid(i_target) );
 
-            break;
         }
+
     } while( 0 );
 
+    TRACUCOMP(g_trac_eeprom,"eepromReadAttributes() %d/%d/0x%X "
+              "wpw=0x%X, dsKb=0x%X, aS=%d (%d)",
+              o_i2cInfo.port, o_i2cInfo.engine, o_i2cInfo.devAddr,
+              o_i2cInfo.writePageSize, o_i2cInfo.devSize_KB,
+              o_i2cInfo.addrSize, eepromData.byteAddrOffset);
+
+
     TRACDCOMP( g_trac_eeprom,
                EXIT_MRK"eepromReadAttributes()" );
 
@@ -831,7 +813,7 @@ errlHndl_t eepromGetI2CMasterTarget ( TARGETING::Target * i_target,
                                     ERRORLOG::ERRL_SEV_UNRECOVERABLE,
                                     EEPROM_GETI2CMASTERTARGET,
                                     EEPROM_DIMM_I2C_MASTER_PATH_ERROR,
-                                    i_i2cInfo.chipTypeEnum,
+                                    i_i2cInfo.chip,
                                     TARGETING::get_huid(i_target) );
 
                 break;
@@ -858,7 +840,7 @@ errlHndl_t eepromGetI2CMasterTarget ( TARGETING::Target * i_target,
                 err = new ERRORLOG::ErrlEntry( ERRORLOG::ERRL_SEV_UNRECOVERABLE,
                                                EEPROM_GETI2CMASTERTARGET,
                                                EEPROM_TARGET_NULL,
-                                               i_i2cInfo.chipTypeEnum,
+                                               i_i2cInfo.chip,
                                                TARGETING::get_huid(i_target) );
 
                 break;
diff --git a/src/usr/i2c/eepromdd.H b/src/usr/i2c/eepromdd.H
index 7464e1881..d30862b62 100755
--- a/src/usr/i2c/eepromdd.H
+++ b/src/usr/i2c/eepromdd.H
@@ -44,10 +44,11 @@ namespace EEPROM
 */
 typedef enum
 {
-    TWO_BYTE_ADDR,
-    ONE_BYTE_ADDR,
+    ZERO_BYTE_ADDR  = 0,
+    ONE_BYTE_ADDR   = 1,
+    TWO_BYTE_ADDR   = 2,
     LAST_DEVICE_TYPE
-} eeprom_device_t;
+} eeprom_addr_size_t;
 
 /**
  * @brief Structure of common parameters needed by different parts of
@@ -60,10 +61,10 @@ typedef struct
     uint64_t devAddr;
     int64_t  chip;
     uint64_t offset;
-    eeprom_device_t deviceType;
+    eeprom_addr_size_t addrSize;
     TARGETING::EntityPath i2cMasterPath;
     uint64_t writePageSize;  // in bytes
-    eeprom_chip_types_t chipTypeEnum;
+    uint64_t devSize_KB;     // in kilobytes
 } eeprom_addr_t;
 
 /**
@@ -156,8 +157,8 @@ errlHndl_t eepromWrite ( TARGETING::Target * i_target,
  *      existing buffer (for Writes), or as a separate write operation
  *      (for Reads).
  *
- * @param[out] o_buffer - The buffer to be written as a byte address to
- *      the EEPROM device.
+ * @param[in/out] io_buffer - The buffer to be written as a byte address to
+ *      the EEPROM device.  Must be pre-allocated to MAX_BYTE_ADDR size.
  *
  * @param[out] o_bufSize - The size of the buffer to be written.
  *
@@ -167,7 +168,7 @@ errlHndl_t eepromWrite ( TARGETING::Target * i_target,
  * @return errlHndl_t - NULL if successful, otherwise a pointer to the
  *      error log.
  */
-errlHndl_t eepromPrepareAddress ( void * o_buffer,
+errlHndl_t eepromPrepareAddress ( void * io_buffer,
                                   size_t & o_bufSize,
                                   eeprom_addr_t i_i2cInfo );
 
diff --git a/src/usr/i2c/i2c.C b/src/usr/i2c/i2c.C
index 66d39bc6e..19403c9b4 100755
--- a/src/usr/i2c/i2c.C
+++ b/src/usr/i2c/i2c.C
@@ -36,6 +36,7 @@
 #include <trace/interface.H>
 #include <errl/errlentry.H>
 #include <errl/errlmanager.H>
+#include <errl/errludtarget.H>
 #include <targeting/common/targetservice.H>
 #include <devicefw/driverif.H>
 #include <targeting/common/predicates/predicates.H>
@@ -97,12 +98,14 @@ errlHndl_t i2cPerformOp( DeviceFW::OperationType i_opType,
                          va_list i_args )
 {
     errlHndl_t err = NULL;
-    bool      l_withStop      = false;
-    bool      l_skipModeSetup = false;
+
+    mutex_t * engineLock = NULL;
+    bool mutex_needs_unlock = false;
 
     // Get the input args our of the va_list
     //  Address, Port, Engine, Device Addr.
-    input_args_t args;
+    // Other args set below
+    misc_args_t args;
     args.port = va_arg( i_args, uint64_t );
     args.engine = va_arg( i_args, uint64_t );
     args.devAddr = va_arg( i_args, uint64_t );
@@ -132,6 +135,7 @@ errlHndl_t i2cPerformOp( DeviceFW::OperationType i_opType,
                (uint64_t) i_opType, i_accessType, args.port, args.engine,
                args.devAddr, io_buflen, l_offset_length, l_offset_buffer);
 
+
     do
     {
         // Check for Master Sentinel chip
@@ -160,10 +164,8 @@ errlHndl_t i2cPerformOp( DeviceFW::OperationType i_opType,
             break;
         }
 
-        // @todo RTC:72715 - Check that target is an I2C master
 
         // Get the mutex for the requested engine
-        mutex_t * engineLock = NULL;
         switch( args.engine )
         {
             case 0:
@@ -191,10 +193,21 @@ errlHndl_t i2cPerformOp( DeviceFW::OperationType i_opType,
                    INFO_MRK"Obtaining lock for engine: %d",
                    args.engine );
         (void)mutex_lock( engineLock );
+        mutex_needs_unlock = true;
         TRACUCOMP( g_trac_i2c,
                    INFO_MRK"Locked on engine: %d",
                    args.engine );
 
+
+        // Calculate variables related to I2C Bus Speed in 'args' struct
+        err =  i2cSetBusVariables( i_target, READ_I2C_BUS_ATTRIBUTES, args);
+
+        if( err )
+        {
+            break;
+        }
+
+
         for( int attempt = 0; attempt < I2C_COMMAND_ATTEMPTS; attempt++ )
         {
             if( err )
@@ -227,25 +240,30 @@ errlHndl_t i2cPerformOp( DeviceFW::OperationType i_opType,
             {
 
                 // First WRITE offset to device without a stop
-                l_withStop = false;
+                args.read_not_write  = false;
+                args.with_stop       = false;
+                args.skip_mode_setup = false;
 
                 err = i2cWrite( i_target,
                                 l_offset_buffer,
                                 l_offset_length,
-                                l_withStop,
                                 args );
 
-
-
-                // Now do the READ with a stop (reads always have 'stop')
-                // Skip mode setup on this cmd - already set with previous cmd
-                l_skipModeSetup = true;
-
-                err = i2cRead( i_target,
-                               io_buffer,
-                               io_buflen,
-                               l_skipModeSetup,
-                               args );
+                if( err == NULL )
+                {
+                    // Now do the READ with a stop
+                    args.read_not_write = true;
+                    args.with_stop      = true;
+
+                    // Skip mode setup on this cmd -
+                    // already set with previous cmd
+                    args.skip_mode_setup = true;
+
+                    err = i2cRead( i_target,
+                                   io_buffer,
+                                   io_buflen,
+                                   args );
+                }
             }
 
             else if( i_opType        == DeviceFW::WRITE &&
@@ -264,14 +282,14 @@ errlHndl_t i2cPerformOp( DeviceFW::OperationType i_opType,
                 // Now add the data the user wanted to write
                 memcpy( &newBuffer[l_offset_length], io_buffer, io_buflen);
 
-                // Other parms:
-                l_withStop = true;
-                l_skipModeSetup = false;
+                // Write parms:
+                args.read_not_write  = false;
+                args.with_stop       = true;
+                args.skip_mode_setup = false;
 
                 err = i2cWrite( i_target,
                                 newBuffer,
                                 newBufLen,
-                                l_withStop,
                                 args );
 
 
@@ -283,13 +301,14 @@ errlHndl_t i2cPerformOp( DeviceFW::OperationType i_opType,
                       l_offset_length == 0 )
             {
                 // Do a direct READ
-                l_skipModeSetup = false;
+                args.read_not_write  = true;
+                args.with_stop       = true;
+                args.skip_mode_setup = false;
 
                 err = i2cRead( i_target,
                                io_buffer,
                                io_buflen,
-                               l_skipModeSetup,
-                               args );
+                               args);
             }
 
 
@@ -297,12 +316,14 @@ errlHndl_t i2cPerformOp( DeviceFW::OperationType i_opType,
                      l_offset_length == 0 )
             {
                 // Do a direct WRITE with a stop
-                l_withStop = true;
+                args.read_not_write  = false;
+                args.with_stop       = true;
+                args.skip_mode_setup = false;
+
                 err = i2cWrite( i_target,
                                 io_buffer,
                                 io_buflen,
-                                l_withStop,
-                                args );
+                                args);
             }
             else
             {
@@ -342,17 +363,27 @@ errlHndl_t i2cPerformOp( DeviceFW::OperationType i_opType,
             }
         }
 
+        if( err )
+        {
+            break;
+        }
+    } while( 0 );
+
+    // Check if we need to unlock the mutex
+    if ( mutex_needs_unlock == true )
+    {
         // Unlock
         (void) mutex_unlock( engineLock );
         TRACUCOMP( g_trac_i2c,
                    INFO_MRK"Unlocked engine: %d",
                    args.engine );
+    }
 
-        if( err )
-        {
-            break;
-        }
-    } while( 0 );
+    // If there is an error, add target to log
+    if ( (err != NULL) && (i_target != NULL) )
+    {
+        ERRORLOG::ErrlUserDetailsTarget(i_target).addToLog(err);
+    }
 
     TRACDCOMP( g_trac_i2c,
                EXIT_MRK"i2cPerformOp() - %s",
@@ -367,40 +398,35 @@ errlHndl_t i2cPerformOp( DeviceFW::OperationType i_opType,
 errlHndl_t i2cRead ( TARGETING::Target * i_target,
                      void * o_buffer,
                      size_t & i_buflen,
-                     bool & i_skipModeSetup,
-                     input_args_t i_args )
+                     misc_args_t & i_args)
 {
     errlHndl_t err = NULL;
-    size_t size = sizeof(uint64_t);
     uint64_t bytesRead = 0x0;
+    size_t size = sizeof(uint64_t);
 
-    uint64_t engine = i_args.engine;
-    uint64_t devAddr = i_args.devAddr;
-    uint64_t port = i_args.port;
 
-    // @todo RTC:72715 - Add multiple bus speed support (set to 400KHz for now)
-    uint64_t interval = I2C_TIMEOUT_INTERVAL( I2C_CLOCK_DIVISOR_400KHZ );
-    uint64_t timeoutCount = I2C_TIMEOUT_COUNT( interval );
+    // Use Local Variables (timeoutCount gets derecmented)
+    uint64_t interval     = i_args.timeout_interval;
+    uint64_t timeoutCount = i_args.timeout_count;
 
     // Define the regs we'll be using
-    statusreg status;
-    fiforeg fifo;
+    status_reg_t status;
+    fifo_reg_t fifo;
 
     TRACDCOMP( g_trac_i2c,
                ENTER_MRK"i2cRead()" );
 
     TRACSCOMP( g_trac_i2cr,
                "I2C READ  START : engine %.2X : port %.2X : devAddr %.2X : len %d",
-               engine, port, devAddr, i_buflen );
+               i_args.engine, i_args.port, i_args.devAddr, i_buflen );
 
     do
     {
         // Do Command/Mode reg setups.
+        i_args.read_not_write = true;
+
         err = i2cSetup( i_target,
                         i_buflen,
-                        true,  // i_readNotWrite
-                        true,  // i_withStop
-                        i_skipModeSetup,
                         i_args );
 
         if( err )
@@ -455,8 +481,8 @@ errlHndl_t i2cRead ( TARGETING::Target * i_target,
                                ERR_MRK"i2cRead() - Timed out waiting for data in FIFO!" );
 
                     uint64_t userdata2 = i_args.port;
-                    userdata2 = (userdata2 << 16) | engine;
-                    userdata2 = (userdata2 << 16) | devAddr;
+                    userdata2 = (userdata2 << 16) | i_args.engine;
+                    userdata2 = (userdata2 << 16) | i_args.devAddr;
 
                     /*@
                      * @errortype
@@ -464,8 +490,7 @@ errlHndl_t i2cRead ( TARGETING::Target * i_target,
                      * @severity         ERRL_SEV_UNRECOVERABLE
                      * @moduleid         I2C_READ
                      * @userdata1        Status Register Value
-                     * @userdata2[0:15]  <UNUSED>
-                     * @userdata2[16:31] Master Port
+                     * @userdata2[0:31]  Master Port
                      * @userdata2[32:47] Master Engine
                      * @userdata2[48:63] Slave Device Address
                      * @devdesc          Timed out waiting for data in FIFO to read
@@ -490,11 +515,12 @@ errlHndl_t i2cRead ( TARGETING::Target * i_target,
             err = deviceRead( i_target,
                               &fifo.value,
                               size,
-                              DEVICE_SCOM_ADDRESS( masterAddrs[engine].fifo ) );
+                              DEVICE_SCOM_ADDRESS(
+                                  masterAddrs[i_args.engine].fifo ) );
 
             TRACUCOMP( g_trac_i2c,
                        INFO_MRK"i2cRead() - FIFO[0x%lx] = 0x%016llx",
-                       masterAddrs[engine].fifo, fifo.value);
+                       masterAddrs[i_args.engine].fifo, fifo.value);
 
             if( err )
             {
@@ -509,7 +535,7 @@ errlHndl_t i2cRead ( TARGETING::Target * i_target,
             TRACUCOMP( g_trac_i2cr,
                        "I2C READ  DATA  : engine %.2X : port %.2x : "
                        "devAddr %.2X : byte %d : %.2X (0x%lx)",
-                       engine, port, devAddr, bytesRead,
+                       i_args.engine, i_args.port, i_args.devAddr, bytesRead,
                        fifo.byte_0, fifo.value );
         }
 
@@ -530,7 +556,7 @@ errlHndl_t i2cRead ( TARGETING::Target * i_target,
 
     TRACSCOMP( g_trac_i2cr,
                "I2C READ  END   : engine %.2X : port %.2x : devAddr %.2X : len %d",
-               engine, port, devAddr, i_buflen );
+               i_args.engine, i_args.port, i_args.devAddr, i_buflen );
 
     TRACDCOMP( g_trac_i2c,
                EXIT_MRK"i2cRead()" );
@@ -544,36 +570,30 @@ errlHndl_t i2cRead ( TARGETING::Target * i_target,
 errlHndl_t i2cWrite ( TARGETING::Target * i_target,
                       void * i_buffer,
                       size_t & io_buflen,
-                      bool & i_withStop,
-                      input_args_t i_args )
+                      misc_args_t & i_args)
 {
     errlHndl_t err = NULL;
-    size_t size = sizeof(uint64_t);
     uint64_t bytesWritten = 0x0;
-
-    uint64_t engine = i_args.engine;
-    uint64_t devAddr = i_args.devAddr;
-    uint64_t port = i_args.port;
+    size_t size = sizeof(uint64_t);
 
     // Define regs we'll be using
-    fiforeg fifo;
+    fifo_reg_t fifo;
 
     TRACDCOMP( g_trac_i2c,
                ENTER_MRK"i2cWrite()" );
 
     TRACSCOMP( g_trac_i2cr,
                "I2C WRITE START : engine %.2X : port %.2X : devAddr %.2X : len %d",
-               engine, port, devAddr, io_buflen );
+               i_args.engine, i_args.port, i_args.devAddr, io_buflen );
 
     do
     {
         // Do Command/Mode reg setups
+        i_args.read_not_write = false;
+
         err = i2cSetup( i_target,
                         io_buflen,
-                        false, // i_readNotWrite
-                        i_withStop,
-                        false, // i_skipModeSetup,
-                        i_args );
+                        i_args);
 
         if( err )
         {
@@ -598,7 +618,8 @@ errlHndl_t i2cWrite ( TARGETING::Target * i_target,
             err = deviceWrite( i_target,
                                &fifo.value,
                                size,
-                               DEVICE_SCOM_ADDRESS( masterAddrs[engine].fifo ) );
+                               DEVICE_SCOM_ADDRESS(
+                                   masterAddrs[i_args.engine].fifo ) );
 
             if( err )
             {
@@ -608,8 +629,8 @@ errlHndl_t i2cWrite ( TARGETING::Target * i_target,
             TRACUCOMP( g_trac_i2cr,
                        "I2C WRITE DATA  : engine %.2X : port %.2X : "
                        "devAddr %.2X : byte %d : %.2X (0x%lx)",
-                       engine, port, devAddr, bytesWritten,
-                       fifo.byte_0, fifo.value );
+                       i_args.engine, i_args.port, i_args.devAddr,
+                       bytesWritten, fifo.byte_0, fifo.value );
         }
 
         if( err )
@@ -632,7 +653,7 @@ errlHndl_t i2cWrite ( TARGETING::Target * i_target,
 
     TRACSCOMP( g_trac_i2cr,
                "I2C WRITE END   : engine %.2X: port %.2X : devAddr %.2X : len %d",
-               engine, port, devAddr, io_buflen );
+               i_args.engine, i_args.port, i_args.devAddr, io_buflen );
 
     TRACDCOMP( g_trac_i2c,
                EXIT_MRK"i2cWrite()" );
@@ -645,25 +666,19 @@ errlHndl_t i2cWrite ( TARGETING::Target * i_target,
 // ------------------------------------------------------------------
 errlHndl_t i2cSetup ( TARGETING::Target * i_target,
                       size_t & i_buflen,
-                      bool i_readNotWrite,
-                      bool i_withStop,
-                      bool i_skipModeSetup,
-                      input_args_t i_args )
+                      misc_args_t & i_args)
 {
     errlHndl_t err = NULL;
     size_t size = sizeof(uint64_t);
 
-    uint64_t port = i_args.port;
-    uint64_t engine = i_args.engine;
-    uint64_t devAddr = i_args.devAddr;
-
     TRACDCOMP( g_trac_i2c,
-               ENTER_MRK"i2cSetup(): buf_len=%d, r_nw=%d, w_stop=%d",
-               i_buflen, i_readNotWrite, i_withStop );
+               ENTER_MRK"i2cSetup(): buf_len=%d, r_nw=%d, w_stop=%d, sms=%d",
+               i_buflen, i_args.read_not_write, i_args.with_stop,
+               i_args.skip_mode_setup);
 
     // Define the registers that we'll use
-    modereg mode;
-    cmdreg cmd;
+    mode_reg_t mode;
+    command_reg_t cmd;
 
     do
     {
@@ -680,25 +695,24 @@ errlHndl_t i2cSetup ( TARGETING::Target * i_target,
         // Skip mode setup on 2nd of 2 cmd strung together - like when sending
         //  device offset first before read or write
 
-        if ( i_skipModeSetup == false)
+        if ( i_args.skip_mode_setup == false)
         {
             // Write Mode Register:
-            //      - bit rate divisor
+            //      - bit rate divisor (set in i2cSetClockVariables() )
             //      - port number
+
             mode.value = 0x0ull;
+            mode.bit_rate_div = i_args.bit_rate_divisor;
+            mode.port_num = i_args.port;
 
-            // @todo RTC:72715 - Add multiple bus speed support
-            // Hard code to 400KHz until we get attributes in place to get
-            // this from the target.
-            mode.bit_rate_div = I2C_CLOCK_DIVISOR_400KHZ;
-            mode.port_num = port;
 
             TRACUCOMP( g_trac_i2c,"i2cSetup(): set mode = 0x%lx", mode.value);
 
             err = deviceWrite( i_target,
                                &mode.value,
                                size,
-                               DEVICE_SCOM_ADDRESS( masterAddrs[engine].mode));
+                               DEVICE_SCOM_ADDRESS(
+                                   masterAddrs[i_args.engine].mode));
 
             if( err )
             {
@@ -714,7 +728,7 @@ errlHndl_t i2cSetup ( TARGETING::Target * i_target,
         //      - length
         cmd.value = 0x0ull;
         cmd.with_start = 1;
-        cmd.with_stop = (i_withStop ? 1 : 0);
+        cmd.with_stop = (i_args.with_stop ? 1 : 0);
         cmd.with_addr = 1;
 
         // cmd.device_addr is 7 bits
@@ -722,9 +736,9 @@ errlHndl_t i2cSetup ( TARGETING::Target * i_target,
         //  -- value stored in LSB byte of uint64_t
         //  -- LS-bit is unused, creating the 7 bit cmd.device_addr
         //  So will be masking for LSB, and then shifting to push off LS-bit
-        cmd.device_addr = (0x000000FF & devAddr) >> 1;
+        cmd.device_addr = (0x000000FF & i_args.devAddr) >> 1;
 
-        cmd.read_not_write = (i_readNotWrite ? 1 : 0);
+        cmd.read_not_write = (i_args.read_not_write ? 1 : 0);
         cmd.length_b = i_buflen;
 
         TRACUCOMP( g_trac_i2c,"i2cSetup(): set cmd = 0x%lx", cmd.value);
@@ -732,7 +746,8 @@ errlHndl_t i2cSetup ( TARGETING::Target * i_target,
         err = deviceWrite( i_target,
                            &cmd.value,
                            size,
-                           DEVICE_SCOM_ADDRESS( masterAddrs[engine].command ) );
+                           DEVICE_SCOM_ADDRESS(
+                               masterAddrs[i_args.engine].command ) );
 
         if( err )
         {
@@ -750,7 +765,7 @@ errlHndl_t i2cSetup ( TARGETING::Target * i_target,
 // i2cWaitForCmdComp
 // ------------------------------------------------------------------
 errlHndl_t i2cWaitForCmdComp ( TARGETING::Target * i_target,
-                               input_args_t i_args )
+                               misc_args_t & i_args)
 {
     errlHndl_t err = NULL;
     uint64_t engine = i_args.engine;
@@ -759,11 +774,11 @@ errlHndl_t i2cWaitForCmdComp ( TARGETING::Target * i_target,
                ENTER_MRK"i2cWaitForCmdComp()" );
 
     // Define the registers that we'll use
-    statusreg status;
+    status_reg_t status;
 
-    // @todo RTC:72715 - Add multiple bus speed support (set to 400KHz for now)
-    uint64_t interval = I2C_TIMEOUT_INTERVAL( I2C_CLOCK_DIVISOR_400KHZ );
-    uint64_t timeoutCount = I2C_TIMEOUT_COUNT( interval );
+    // Use Local Variables (timeoutCount gets derecmented)
+    uint64_t interval     = i_args.timeout_interval;
+    uint64_t timeoutCount = i_args.timeout_count;
 
     TRACUCOMP(g_trac_i2c, "i2cWaitForCmdComp(): timeoutCount=%d, interval=%d",
               timeoutCount, interval);
@@ -824,12 +839,11 @@ errlHndl_t i2cWaitForCmdComp ( TARGETING::Target * i_target,
 // i2cReadStatusReg
 // ------------------------------------------------------------------
 errlHndl_t i2cReadStatusReg ( TARGETING::Target * i_target,
-                              input_args_t i_args,
-                              statusreg & o_statusReg )
+                              misc_args_t & i_args,
+                              status_reg_t & o_statusReg )
 {
     errlHndl_t err = NULL;
     size_t size = sizeof(uint64_t);
-    uint64_t engine = i_args.engine;
 
     TRACDCOMP( g_trac_i2c,
                ENTER_MRK"i2cReadStatusReg()" );
@@ -840,7 +854,8 @@ errlHndl_t i2cReadStatusReg ( TARGETING::Target * i_target,
         err = deviceRead( i_target,
                           &o_statusReg.value,
                           size,
-                          DEVICE_SCOM_ADDRESS( masterAddrs[engine].status ) );
+                          DEVICE_SCOM_ADDRESS(
+                              masterAddrs[i_args.engine].status ) );
 
         if( err )
         {
@@ -849,7 +864,7 @@ errlHndl_t i2cReadStatusReg ( TARGETING::Target * i_target,
 
         TRACUCOMP(g_trac_i2c,"i2cReadStatusReg(): "
                   INFO_MRK"status[0x%lx]: 0x%016llx",
-                  masterAddrs[engine].status, o_statusReg.value );
+                  masterAddrs[i_args.engine].status, o_statusReg.value );
 
 
         // Check for Errors
@@ -875,8 +890,8 @@ errlHndl_t i2cReadStatusReg ( TARGETING::Target * i_target,
 // i2cCheckForErrors
 // ------------------------------------------------------------------
 errlHndl_t i2cCheckForErrors ( TARGETING::Target * i_target,
-                               input_args_t i_args,
-                               statusreg i_statusVal )
+                               misc_args_t & i_args,
+                               status_reg_t i_statusVal )
 {
     errlHndl_t err = NULL;
     bool errorFound = false;
@@ -1003,16 +1018,16 @@ errlHndl_t i2cCheckForErrors ( TARGETING::Target * i_target,
 // i2cWaitForFifoSpace
 // ------------------------------------------------------------------
 errlHndl_t i2cWaitForFifoSpace ( TARGETING::Target * i_target,
-                                 input_args_t i_args )
+                                 misc_args_t & i_args )
 {
     errlHndl_t err = NULL;
 
-    // @todo RTC:72715 - support multiple bus speeds (set to 400KHz for now)
-    uint64_t interval = I2C_TIMEOUT_INTERVAL( I2C_CLOCK_DIVISOR_400KHZ );
-    uint64_t timeoutCount = I2C_TIMEOUT_COUNT( interval );
+    // Use Local Variables (timeoutCount gets derecmented)
+    uint64_t interval     = i_args.timeout_interval;
+    uint64_t timeoutCount = i_args.timeout_count;
 
     // Define regs we'll be using
-    statusreg status;
+    status_reg_t status;
 
     TRACDCOMP( g_trac_i2c,
                ENTER_MRK"i2cWaitForFifoSpace()" );
@@ -1096,19 +1111,18 @@ errlHndl_t i2cWaitForFifoSpace ( TARGETING::Target * i_target,
 // i2cReset
 // ------------------------------------------------------------------
 errlHndl_t i2cReset ( TARGETING::Target * i_target,
-                      input_args_t i_args )
+                      misc_args_t & i_args)
 {
     errlHndl_t err = NULL;
     size_t size = sizeof(uint64_t);
 
     // Get Args
-    uint64_t engine = i_args.engine;
 
     TRACDCOMP( g_trac_i2c,
                ENTER_MRK"i2cReset()" );
 
     // Writing to the Status Register does a full I2C reset.
-    statusreg reset;
+    status_reg_t reset;
 
     do
     {
@@ -1116,12 +1130,13 @@ errlHndl_t i2cReset ( TARGETING::Target * i_target,
 
         TRACUCOMP(g_trac_i2c,"i2cReset() "
                   "reset[0x%lx]: 0x%016llx",
-                  masterAddrs[engine].reset, reset.value );
+                  masterAddrs[i_args.engine].reset, reset.value );
 
         err = deviceWrite( i_target,
                            &reset.value,
                            size,
-                           DEVICE_SCOM_ADDRESS( masterAddrs[engine].reset ) );
+                           DEVICE_SCOM_ADDRESS(
+                               masterAddrs[i_args.engine].reset ) );
 
         if( err )
         {
@@ -1152,16 +1167,14 @@ errlHndl_t i2cReset ( TARGETING::Target * i_target,
 // i2cSendSlaveStop
 // ------------------------------------------------------------------
 errlHndl_t i2cSendSlaveStop ( TARGETING::Target * i_target,
-                              input_args_t i_args )
+                              misc_args_t & i_args)
 {
     errlHndl_t err = NULL;
     size_t size = sizeof(uint64_t);
-    uint64_t engine = i_args.engine;
-    uint64_t port = i_args.port;
 
     // Master Registers
-    modereg mode;
-    cmdreg cmd;
+    mode_reg_t mode;
+    command_reg_t cmd;
 
     TRACDCOMP( g_trac_i2c,
                ENTER_MRK"i2cSendSlaveStop()" );
@@ -1170,11 +1183,8 @@ errlHndl_t i2cSendSlaveStop ( TARGETING::Target * i_target,
     {
         mode.value = 0x0ull;
 
-        // @todo RTC:72715 - support multiple bus speeds
-        // Hard code to 400KHz until we get attributes in place to get
-        // this from the target.
-        mode.bit_rate_div = I2C_CLOCK_DIVISOR_400KHZ;
-        mode.port_num = port;
+        mode.bit_rate_div = i_args.bit_rate_divisor;
+        mode.port_num = i_args.port;
         mode.enhanced_mode = 1;
 
         TRACUCOMP(g_trac_i2c,"i2cSendSlaveStop(): "
@@ -1184,7 +1194,8 @@ errlHndl_t i2cSendSlaveStop ( TARGETING::Target * i_target,
         err = deviceWrite( i_target,
                            &mode.value,
                            size,
-                           DEVICE_SCOM_ADDRESS( masterAddrs[engine].mode ) );
+                           DEVICE_SCOM_ADDRESS(
+                               masterAddrs[i_args.engine].mode ) );
 
         if( err )
         {
@@ -1201,7 +1212,8 @@ errlHndl_t i2cSendSlaveStop ( TARGETING::Target * i_target,
         err = deviceWrite( i_target,
                            &cmd.value,
                            size,
-                           DEVICE_SCOM_ADDRESS( masterAddrs[engine].command ) );
+                           DEVICE_SCOM_ADDRESS(
+                               masterAddrs[i_args.engine].command ) );
 
         if( err )
         {
@@ -1229,15 +1241,14 @@ errlHndl_t i2cSendSlaveStop ( TARGETING::Target * i_target,
 // i2cGetInterrupts
 // ------------------------------------------------------------------
 errlHndl_t i2cGetInterrupts ( TARGETING::Target * i_target,
-                              input_args_t i_args,
+                              misc_args_t & i_args,
                               uint64_t & o_intRegValue )
 {
     errlHndl_t err = NULL;
     size_t size = sizeof(uint64_t);
-    uint64_t engine = i_args.engine;
 
     // Master Regs
-    interruptreg intreg;
+    interrupt_reg_t intreg;
 
     TRACDCOMP( g_trac_i2c,
                ENTER_MRK"i2cGetInterrupts()" );
@@ -1248,7 +1259,8 @@ errlHndl_t i2cGetInterrupts ( TARGETING::Target * i_target,
         err = deviceRead( i_target,
                           &intreg.value,
                           size,
-                          DEVICE_SCOM_ADDRESS( masterAddrs[engine].interrupt ) );
+                          DEVICE_SCOM_ADDRESS(
+                              masterAddrs[i_args.engine].interrupt ) );
 
         if( err )
         {
@@ -1277,10 +1289,12 @@ errlHndl_t i2cGetInterrupts ( TARGETING::Target * i_target,
 errlHndl_t i2cSetupMasters ( void )
 {
     errlHndl_t err = NULL;
-
-    modereg mode;
     size_t size = sizeof(uint64_t);
 
+    misc_args_t io_args;
+
+    mode_reg_t mode;
+
     TRACDCOMP( g_trac_i2c,
                ENTER_MRK"i2cSetupMasters()" );
 
@@ -1346,14 +1360,32 @@ errlHndl_t i2cSetupMasters ( void )
                 // Write Mode Register:
                 mode.value = 0x0ull;
 
-                // @todo RTC:72715 - support multiple bus speeds
-                // Hard code to 400KHz until we get attributes in place
-                // to get this from the target.
-                mode.bit_rate_div = I2C_CLOCK_DIVISOR_400KHZ;
+                // Hardcode to 400KHz for PHYP
+                err = i2cSetBusVariables ( centList[centaur],
+                                           SET_I2C_BUS_400KHZ,
+                                           io_args );
+
+                if( err )
+                {
+                    TRACFCOMP( g_trac_i2c,
+                               ERR_MRK"i2cSetupMasters: Error Setting Bus "
+                               "Speed Variables-Centaur, engine: %d",
+                               engine );
+
+                    // If we get error skip setting this target, but still need
+                    // to continue to program the I2C Bus Divisor for the rest
+                    errlCommit( err,
+                                I2C_COMP_ID );
+                    continue;
+                }
+
+                mode.bit_rate_div = io_args.bit_rate_divisor;
+
                 err = deviceWrite( centList[centaur],
                                    &mode.value,
                                    size,
-                                   DEVICE_SCOM_ADDRESS( masterAddrs[engine].mode ) );
+                                   DEVICE_SCOM_ADDRESS(
+                                       masterAddrs[engine].mode));
 
                 if( err )
                 {
@@ -1434,14 +1466,33 @@ errlHndl_t i2cSetupMasters ( void )
                 // Write Mode Register:
                 mode.value = 0x0ull;
 
-                // @todo RTC:72715 - support multiple bus speeds
-                // Hard code to 400KHz until we get attributes in place
-                // to get this from the target.
-                mode.bit_rate_div = I2C_CLOCK_DIVISOR_400KHZ;
+                // Hardcode to 400KHz for PHYP
+                err = i2cSetBusVariables ( procList[proc],
+                                           SET_I2C_BUS_400KHZ,
+                                           io_args );
+
+                if( err )
+                {
+                    TRACFCOMP( g_trac_i2c,
+                               ERR_MRK"i2cSetupMasters: Error Setting Bus "
+                               "Speed Variables-Processor, engine: %d",
+                               engine );
+
+                    // If we get error skip setting this target, but still need
+                    // to continue to program the I2C Bus Divisor for the rest
+                    errlCommit( err,
+                                I2C_COMP_ID );
+
+                    continue;
+                }
+
+                mode.bit_rate_div = io_args.bit_rate_divisor;
+
                 err = deviceWrite( procList[proc],
                                    &mode.value,
                                    size,
-                                   DEVICE_SCOM_ADDRESS( masterAddrs[engine].mode ) );
+                                   DEVICE_SCOM_ADDRESS(
+                                       masterAddrs[engine].mode));
 
                 if( err )
                 {
@@ -1476,4 +1527,85 @@ errlHndl_t i2cSetupMasters ( void )
 }
 
 
+
+// ------------------------------------------------------------------
+//  i2cSetClockVariables
+// ------------------------------------------------------------------
+errlHndl_t i2cSetBusVariables ( TARGETING::Target * i_target,
+                                i2c_bus_setting_mode_t i_mode,
+                                misc_args_t & io_args)
+{
+    errlHndl_t err = NULL;
+
+    TRACDCOMP( g_trac_i2c,
+               ENTER_MRK"i2cSetBusVariables()" );
+
+    do
+    {
+
+        // @todo RTC:80614 - Read I2C bus speed attributes from I2C Master
+        // For now, hardcode to 400KHz
+        i_mode = SET_I2C_BUS_400KHZ;
+
+        if (i_mode == SET_I2C_BUS_400KHZ)
+        {
+
+            io_args.bus_speed = 400;
+            io_args.bit_rate_divisor = I2C_CLOCK_DIVISOR_400KHZ;
+            io_args.timeout_interval = I2C_TIMEOUT_INTERVAL(
+                                           I2C_CLOCK_DIVISOR_400KHZ);
+            io_args.timeout_count = I2C_TIMEOUT_COUNT(
+                                        io_args.timeout_interval);
+
+
+        }
+
+        /* @todo RTC:80614 - sync up reading attributes with MRW
+        else if (i_mode == READ_I2C_BUS_ATTRIBUTES)
+        {
+
+        }
+        */
+
+        else
+        {
+            TRACFCOMP( g_trac_i2c, ERR_MRK"i2cSetBusVariables: "
+                       "Invalid Bus Speed Mode Input!" );
+
+            /*@
+             * @errortype
+             * @reasoncode       I2C_INVALID_BUS_SPEED_MODE
+             * @severity         ERRORLOG::ERRL_SEV_UNRECOVERABLE
+             * @moduleid         I2C_SET_BUS_VARIABLES
+             * @userdata1        I2C Bus Setting Mode Enum
+             * @userdata2        <UNUSED>
+             * @frucallout       <NONE>
+             * @devdesc          Invalid I2C bus speed mode input
+             */
+            err = new ERRORLOG::ErrlEntry( ERRORLOG::ERRL_SEV_UNRECOVERABLE,
+                                           I2C_SET_BUS_VARIABLES,
+                                           I2C_INVALID_BUS_SPEED_MODE,
+                                           i_mode,
+                                           0x0 );
+            break;
+
+        }
+
+
+    } while( 0 );
+
+
+    TRACUCOMP(g_trac_i2c,"i2cSetBusVariables(): e/p/dA=%d/%d/0x%x: "
+              "mode=%d: b_sp=%d, b_r_d=0x%x, to_i=%d, to_c = %d",
+              io_args.engine, io_args.port, io_args.devAddr,
+              i_mode, io_args.bus_speed, io_args.bit_rate_divisor,
+              io_args.timeout_interval, io_args.timeout_count);
+
+    TRACDCOMP( g_trac_i2c,
+               EXIT_MRK"i2cSetBusVariables()" );
+
+    return err;
+}
+
+
 } // end namespace I2C
diff --git a/src/usr/i2c/i2c.H b/src/usr/i2c/i2c.H
index d1b3b2afd..e864df093 100755
--- a/src/usr/i2c/i2c.H
+++ b/src/usr/i2c/i2c.H
@@ -105,7 +105,7 @@ namespace I2C
 /**
  * @brief I2C Master register structure and address definition
  */
-typedef struct
+struct i2c_addrs_t
 {
     uint64_t fifo;
     uint64_t command;
@@ -114,9 +114,11 @@ typedef struct
     uint64_t interrupt;
     uint64_t status;
     uint64_t reset;
-} i2c_addrs_t;
+};
 
-// Addresses for each of the registers in each engine.
+/**
+ * @brief Addresses for each of the registers in each engine.
+ */
 static i2c_addrs_t masterAddrs[] =
 {
     { /* Master 0 */
@@ -148,6 +150,34 @@ static i2c_addrs_t masterAddrs[] =
     }
 };
 
+/**
+ * @brief Structure used to pass important variables between functions
+ */
+struct misc_args_t
+{
+    uint8_t  port;
+    uint8_t  engine;
+    uint64_t devAddr;
+    bool     skip_mode_setup;
+    bool     with_stop;
+    bool     read_not_write;
+    uint64_t bus_speed;          // in kbits/sec (ie 400KHz)
+    uint16_t bit_rate_divisor;   // uint16_t to match size in mode register
+    uint64_t timeout_interval;
+    uint64_t timeout_count;
+};
+
+/**
+ * @brief Different ways of setting the I2C Bus Speed
+ */
+enum i2c_bus_setting_mode_t
+{
+    READ_I2C_BUS_ATTRIBUTES,
+    SET_I2C_BUS_400KHZ,
+    LAST_BUS_SETTING_MODE_TYPE
+};
+
+
 
 // -----------------------------------------------------------------------
 // NOTE: Addressing listed below is from the PIB I2C Master Addressing
@@ -159,7 +189,7 @@ static i2c_addrs_t masterAddrs[] =
 * @brief I2C FIFO register definition
 *       Address 0x04
 */
-union fiforeg
+union fifo_reg_t
 {
     uint64_t value;
     struct
@@ -167,13 +197,13 @@ union fiforeg
         uint64_t byte_0 : 8;
         uint64_t padding : 56;
     } PACKED;
-} fifo_reg_t;
+};
 
 /**
  * @brief I2C Command register definition
  *      Address 0x05
  */
-union cmdreg
+union command_reg_t
 {
     uint64_t value;
     struct
@@ -188,13 +218,13 @@ union cmdreg
         uint64_t length_b : 16;
         uint64_t padding : 32;
     } PACKED;
-} command_reg_t;
+};
 
 /**
  * @brief I2C Mode register definition
  *      Address 0x06
  */
-union modereg
+union mode_reg_t
 {
     uint64_t value;
     struct
@@ -208,13 +238,13 @@ union modereg
         uint64_t wrap_mode : 1;
         uint64_t padding : 32;
     } PACKED;
-} mode_reg_t;
+};
 
 /**
  * @brief Watermark register definition
  *      Address 0x07
  */
-union watermarkreg
+union watermark_reg_t
 {
     uint64_t value;
     struct
@@ -226,13 +256,13 @@ union watermarkreg
         uint64_t reserved2 : 4;
         uint64_t padding : 32;
     } PACKED;
-} watermark_reg_t;
+};
 
 /**
  * @brief Interrupt Mask register definition
  *      Address 0x08
  */
-union intmaskreg
+union interrupt_mask_reg_t
 {
     uint64_t value;
     struct
@@ -256,13 +286,13 @@ union intmaskreg
         uint64_t sda_eq_0 : 1;
         uint64_t padding : 32;
     } PACKED;
-} interrupt_mask_reg_t;
+};
 
 /**
  * @brief Interrupt Condition register definition
  *      Address 0x09
  */
-union intcondreg
+union interrupt_cond_reg_t
 {
     uint64_t value;
     struct
@@ -286,13 +316,13 @@ union intcondreg
         uint64_t sda_eq_0 : 1;
         uint64_t padding : 32;
     } PACKED;
-} interrupt_cond_reg_t;
+};
 
 /**
  * @brief Interrupt register definition
  *      Address 0x0A
  */
-union interruptreg
+union interrupt_reg_t
 {
     uint64_t value;
     struct
@@ -316,13 +346,13 @@ union interruptreg
         uint64_t sda_eq_0 : 1;
         uint64_t padding: 32;
     } PACKED;
-} interrupt_reg_t;
+};
 
 /**
  * @brief Status register definition
  *      Address 0x0B
  */
-union statusreg
+union status_reg_t
 {
     uint64_t value;
     struct
@@ -347,13 +377,13 @@ union statusreg
         uint64_t fifo_entry_count : 8;
         uint64_t padding : 32;
     } PACKED;
-} status_reg_t;
+};
 
 /**
  * @brief Extended Status register definition
  *      Address 0x0C
  */
-union extstatusreg
+union extended_status_reg_t
 {
     uint64_t value;
     struct
@@ -375,13 +405,13 @@ union extstatusreg
         uint64_t i2c_version : 5;
         uint64_t padding : 32;
     } PACKED;
-} extended_status_reg_t;
+};
 
 /**
  * @brief Residual Front/Back end length register definition
  *      Address 0x0D
  */
-union residuallengthreg
+union residual_length_reg_t
 {
     uint64_t value;
     struct
@@ -390,14 +420,8 @@ union residuallengthreg
         uint64_t back_end_length : 16;
         uint64_t padding : 32;
     } PACKED;
-} residual_length_reg_t;
+};
 
-typedef struct
-{
-    uint64_t port;
-    uint64_t engine;
-    uint64_t devAddr;
-} input_args_t;
 
 
 /**
@@ -451,9 +475,6 @@ errlHndl_t i2cPerformOp( DeviceFW::OperationType i_opType,
  * @param[in] i_buflen - The size of the data to read and place in the
  *      buffer.
  *
- * @param[in] i_skipModeSetup - true if mode register setup needs to be
- *      skipped
- *
  * @param[in] i_args - Structure containing arguments needed for a command
  *  transaction.
  *
@@ -463,8 +484,7 @@ errlHndl_t i2cPerformOp( DeviceFW::OperationType i_opType,
 errlHndl_t i2cRead ( TARGETING::Target * i_target,
                      void * o_buffer,
                      size_t & i_buflen,
-                     bool & i_skipModeSetup,
-                     input_args_t i_args );
+                     misc_args_t & i_args);
 
 /**
  * @brief This function will do the real work of writinging to the I2C
@@ -478,9 +498,6 @@ errlHndl_t i2cRead ( TARGETING::Target * i_target,
  * @param[in/out] io_buflen - INPUT: The size of the data to write to the
  *      target device.   OUTPUT: The size of the data buffer written.
  *
- * @param[in] i_withStop - true if with_stop bit is to be set on operation;
- *                         otherwise, with_stop bit will be set to zero.
- *
  * @param[in] i_args - Structure containing arguments needed for a command
  *  transaction.
  *
@@ -491,8 +508,7 @@ errlHndl_t i2cRead ( TARGETING::Target * i_target,
 errlHndl_t i2cWrite ( TARGETING::Target * i_target,
                       void * i_buffer,
                       size_t & io_buflen,
-                      bool & i_withStop,
-                      input_args_t i_args );
+                      misc_args_t & i_args);
 
 /**
  * @brief This function will do the I2C setup of the Address/Command registers
@@ -502,15 +518,6 @@ errlHndl_t i2cWrite ( TARGETING::Target * i_target,
  *
  * @param[in] i_buflen - The size of the data that will be read/written.
  *
- * @param[in] i_readNotWrite - true if doing a read operation, false if
- *      doing a write operation.
- *
- * @param[in] i_withStop - true if with_stop bit is to be set, otherwise
- *      with_stop will be set to zero.
- *
- * @param[in] i_skipModeSetup - true if mode register setup needs to be
- *      skipped
- *
  * @param[in] i_args - Structure containing arguments needed for a command
  *  transaction.
  *
@@ -519,10 +526,7 @@ errlHndl_t i2cWrite ( TARGETING::Target * i_target,
  */
 errlHndl_t i2cSetup ( TARGETING::Target * i_target,
                       size_t & i_buflen,
-                      bool i_readNotWrite,
-                      bool i_withStop,
-                      bool i_skipModeSetup,
-                      input_args_t i_args );
+                      misc_args_t & i_args);
 
 /**
  * @brief This function will wait for the command to be complete or
@@ -537,7 +541,7 @@ errlHndl_t i2cSetup ( TARGETING::Target * i_target,
  *      the error log.
  */
 errlHndl_t i2cWaitForCmdComp ( TARGETING::Target * i_target,
-                               input_args_t i_args );
+                               misc_args_t & i_args);
 
 /**
  * @brief This function will read the I2C Master engine status register
@@ -554,8 +558,8 @@ errlHndl_t i2cWaitForCmdComp ( TARGETING::Target * i_target,
  *      the error log.
  */
 errlHndl_t i2cReadStatusReg ( TARGETING::Target * i_target,
-                              input_args_t i_args,
-                              statusreg & o_statusReg );
+                              misc_args_t & i_args,
+                              status_reg_t & o_statusReg );
 
 /**
  * @brief This function will check for errors in the status register
@@ -572,8 +576,8 @@ errlHndl_t i2cReadStatusReg ( TARGETING::Target * i_target,
  *      the error log.
  */
 errlHndl_t i2cCheckForErrors ( TARGETING::Target * i_target,
-                               input_args_t i_args,
-                               statusreg i_statusVal );
+                               misc_args_t & i_args,
+                               status_reg_t i_statusVal );
 
 /**
  * @brief This function will read the status register and not return
@@ -590,7 +594,7 @@ errlHndl_t i2cCheckForErrors ( TARGETING::Target * i_target,
  *      the error log.
  */
 errlHndl_t i2cWaitForFifoSpace ( TARGETING::Target * i_target,
-                                 input_args_t i_args );
+                                 misc_args_t & i_args);
 
 /**
  * @brief This function will reset the I2C Master engine specified
@@ -606,7 +610,7 @@ errlHndl_t i2cWaitForFifoSpace ( TARGETING::Target * i_target,
  *      the error log.
  */
 errlHndl_t i2cReset ( TARGETING::Target * i_target,
-                      input_args_t i_args );
+                      misc_args_t & i_args );
 
 /**
  * @brief This function will send the Stop command to the slave device
@@ -621,7 +625,7 @@ errlHndl_t i2cReset ( TARGETING::Target * i_target,
  *      the error log.
  */
 errlHndl_t i2cSendSlaveStop ( TARGETING::Target * i_target,
-                              input_args_t i_args );
+                              misc_args_t & i_args );
 
 /**
  * @brief This function will read the interrupt register and return the
@@ -639,9 +643,27 @@ errlHndl_t i2cSendSlaveStop ( TARGETING::Target * i_target,
  *      the error log.
  */
 errlHndl_t i2cGetInterrupts ( TARGETING::Target * i_target,
-                              input_args_t i_args,
+                              misc_args_t & i_args,
                               uint64_t & o_intRegValue );
 
+/**
+ * @brief This function calculates the different variables related to the
+ *        I2C Bus Speed that are used in the other functions
+ *
+ * @param[in] i_target - The I2C master target.
+ *
+ * @param[in] i_mode - States how bus setting will be determined
+ *
+ * @param[in/out] io_args - Structure containing arguments needed for a command
+ *      transaction. Clock arguments set in this function.
+ *
+ * @return errHndl_t - NULL if successful, otherwise a pointer to
+ *      the error log.
+ */
+errlHndl_t i2cSetBusVariables ( TARGETING::Target * i_target,
+                                i2c_bus_setting_mode_t i_mode,
+                                misc_args_t & io_args );
+
 
 }; // end I2C namespace
 
diff --git a/src/usr/i2c/test/eepromddtest.H b/src/usr/i2c/test/eepromddtest.H
index 48b6329cc..d8e0fef9f 100755
--- a/src/usr/i2c/test/eepromddtest.H
+++ b/src/usr/i2c/test/eepromddtest.H
@@ -28,14 +28,15 @@
  *
  *  @brief Test cases for the eeprom dd code
  */
-#include <sys/time.h>
 
+#include <sys/time.h>
 #include <cxxtest/TestSuite.H>
 #include <errl/errlmanager.H>
 #include <errl/errlentry.H>
 #include <devicefw/driverif.H>
 #include <i2c/eepromddreasoncodes.H>
 #include <targeting/common/commontargeting.H>
+#include <pnor/pnorif.H>
 #include "i2ctest.H"
 #include "../eepromdd.H"
 
@@ -47,7 +48,6 @@ using namespace TARGETING;
 using namespace EEPROM;
 
 
-
 class EEPROMTest: public CxxTest::TestSuite
 {
     public:
@@ -63,10 +63,6 @@ class EEPROMTest: public CxxTest::TestSuite
             int fails = 0;
             int num_ops = 0;
 
-            uint8_t* testBuffer = NULL;
-            uint8_t* testBuffer_read = NULL;
-
-
             TRACFCOMP( g_trac_eeprom,
                        "testEEPROMReadWrite - Start" );
 
@@ -151,8 +147,8 @@ class EEPROMTest: public CxxTest::TestSuite
                 for( uint32_t j = 0; j < fullList.size(); j++ )
                 {
                     // Skip this target if EEPROM isn't available. or if non functional
-                    if( !isI2CAvailable( fullList[j] ) ||
-                        !fullList[j]->getAttr<TARGETING::ATTR_HWAS_STATE>().functional)
+                    if( !fullList[j]->getAttr<TARGETING::ATTR_HWAS_STATE>()\
+                        .functional)
                     {
                         continue;
                     }
@@ -208,93 +204,256 @@ class EEPROMTest: public CxxTest::TestSuite
                     }
                 }
 
-                // Test EEPROM Write of large size
-                // @todo RTC:69113 - will clean this up:
-                //  1) Make its own testcase function
-                //  2) Will use a larger data set: Plan on using 4K header of
-                //  test_signed_container and putting it into un-used area of
-                //  SBE_BACKUP
-                //  3) Will restore original data just in case
-                uint64_t testBufLen = 0xF1;
-                testBuffer = static_cast<uint8_t*>(malloc(testBufLen));
-                memset(testBuffer, 0xFE, testBufLen);
-
-                // Randomize the Data a bit
-                for (uint64_t i = 0;
-                       i < ((testBufLen / 8) + 1);
-                     i++)
-                    testBuffer[i*8] = i;
-
-                for (uint64_t k = 0; k < 8; k++)
-                    testBuffer[k] = k;
-
-                // do the Write operation
-                err = deviceOp( DeviceFW::WRITE,
-                                fullList[0],
-                                testBuffer,
-                                testBufLen,
-                                DEVICE_EEPROM_ADDRESS(SBE_BACKUP,0x0));
-                if( err )
-                {
-                    TS_FAIL( "testEEPROMReadWrite - FAIL on large Data Write");
-                    errlCommit( err,
-                                EEPROM_COMP_ID );
-                    delete err;
-                    break;
-                }
+            } while( 0 );
 
-                // Read Back and Compare
-                testBuffer_read = static_cast<uint8_t*>(malloc( testBufLen ));
+            TRACFCOMP( g_trac_eeprom,
+                       "testEEPROMReadWrite - End: %d/%d fails",
+                       fails, num_ops );
+        }
 
-                // clear read buffer
-                memset (testBuffer_read, 0, testBufLen);
 
-                // do the Read operation
-                err = deviceOp( DeviceFW::READ,
-                                fullList[0],
-                                testBuffer_read,
-                                testBufLen,
-                                DEVICE_EEPROM_ADDRESS(SBE_BACKUP,0x0));
+        /**
+         * @brief EEPROM Read/Write Large Test
+         *      This test will read and write 1KB of data to SBE Backup
+         *      VPD.  It will attempt to restore the original data at
+         *      the end of the test.
+         *
+         *      Note: 1st 1K of SBE EEPROM data is currently blank, so this
+         *      test will read and write to that address space
+         */
+        void testEEPROMReadWriteLarge ( void )
+        {
+            errlHndl_t err = NULL;
+            int fails = 0;
+            int num_ops = 0;
+            int cmds = 0;
+
+            // Create 1KB buffers
+            size_t  testBufLen = 1024;
+            uint8_t testBuffer[testBufLen];
+            uint8_t new_data[testBufLen];
+            uint8_t original_data[testBufLen];
+
+
+            TRACFCOMP( g_trac_eeprom,
+                       "testEEPROMReadWriteLarge - Start" );
+
+            // Skipping EEPROM test altogether in VBU/VPO environment
+            if( TARGETING::is_vpo() )
+            {
+                return;
+            }
+
+            do
+            {
+                // Get a processor Target
+                TARGETING::TargetService& l_targetService =
+                                          TARGETING::targetService();
+                TARGETING::Target* testTarget = NULL;
+                l_targetService.masterProcChipTargetHandle( testTarget );
+                assert(testTarget != NULL);
+                TargetHandleList fullList;
+                fullList.push_back( testTarget );
+
+                // 5 operations of 1K data per target (details below)
+                const uint32_t NUM_CMDS = 5;
+
+                // Number of total operations
+                num_ops = fullList.size() * NUM_CMDS;
+
 
+                /************************************************************/
+                /* Using PNOR to return the extended image to use as new_data */
+                /**************************************************************/
+                // Jumping 32K into extended image for more dense data
+                static const uint64_t HEADER_OFFSET = 0x8000;
+                PNOR::SectionInfo_t pnorSectionInfo;
 
-                if( err )
+                err = PNOR::getSectionInfo(PNOR::HB_EXT_CODE,
+                                           PNOR::CURRENT_SIDE,
+                                           pnorSectionInfo);
+
+                if ( err ||
+                     (pnorSectionInfo.size < HEADER_OFFSET + testBufLen)
+                   )
                 {
-                    TS_FAIL( "testEEPROMReadWrite - FAIL on large Data Read");
-                    errlCommit( err,
-                                EEPROM_COMP_ID );
+                    TS_FAIL("testEEPROMReadWriteLarge: PNOR::getSectionInfo failed or size too small: pnorSize=0x%X, HEADER_OFFSET=0x%X, testBufLen = 0x%X", pnorSectionInfo.size, HEADER_OFFSET, testBufLen);
+                    errlCommit(err, EEPROM_COMP_ID);
                     delete err;
+                    fails++;
                     break;
                 }
 
 
-                // Compare the data
-                if ( memcmp( testBuffer, testBuffer_read, testBufLen) )
+                void* tmp_ptr = reinterpret_cast<void*>(pnorSectionInfo.vaddr +
+                                                         HEADER_OFFSET);
+
+                if (tmp_ptr == NULL)
                 {
-                    TS_FAIL( "testEEPROMReadWrite - MISCOMPARE on large Data");
+                    TS_FAIL("testEEPROMReadWriteLarge: Couldn't get tmp_ptr for new data");
+                    errlCommit(err, EEPROM_COMP_ID);
+                    delete err;
+                    fails++;
                     break;
+
                 }
-                else
+
+                //  Valid Buffer, so memcpy the first 1KB
+                memcpy( new_data, tmp_ptr, testBufLen );
+
+
+                /************************************************************/
+                /* Loop through targets and perform operations              */
+                /************************************************************/
+
+                for( uint32_t i = 0; i < fullList.size(); i++ )
                 {
-                    TRACUCOMP( g_trac_eeprom, "testEEPROMReadWrite - large "
-                                              "Data R/W Successful");
-                }
+                    // Skip this target if EEPROM isn't available
+                    // or if non functional
+                    if( !fullList[i]->getAttr<TARGETING::ATTR_HWAS_STATE>()\
+                        .functional)
+                    {
+                        continue;
+                    }
 
-            } while( 0 );
 
-            // Clean up malloc'ed buffers
-            if ( testBuffer != NULL)
-            {
-                free(testBuffer);
-            }
+                    // Before starting, clear original data buffer
+                    memset(original_data, 0x0, testBufLen);
 
-            if ( testBuffer_read != NULL)
-            {
-                free(testBuffer_read);
-            }
+                    for (uint8_t j = 1; j <= NUM_CMDS; j++)
+                    {
+
+                        // Details: 5 operations of 1K data per target
+                        // 1) Read Original Data and Save It
+                        // 2) Write New Data
+                        // 3) Read New Data and Compare
+                        // 4) Write Back Original Data
+                        // 5) Read Back Original Data and Compare
+
+                        // Clear data buffer before reads
+                        if ( (j == 1) || (j == 3) || (j == 5) )
+                        {
+                            memset(testBuffer, 0x0, testBufLen);
+                        }
+
+                        // For Loop 2: set data to new data
+                        if ( j == 2 )
+                        {
+                            memcpy(testBuffer, new_data, testBufLen);
+                        }
 
+                        // For Loop 4: set data to original_data
+                        if ( j == 4 )
+                        {
+                            memcpy(testBuffer, original_data, testBufLen);
+                        }
+
+                        // increment cmd op counter
+                        cmds++;
+
+                        // do the Operation
+                        err = deviceOp(
+                                (j%2) ? DeviceFW::READ : DeviceFW::WRITE,
+                                fullList[0],
+                                testBuffer,
+                                testBufLen,
+                                DEVICE_EEPROM_ADDRESS(SBE_BACKUP,0x0));
+
+                        if( err )
+                        {
+                            TS_FAIL( "testEEPROMReadWriteLarge = OP %d FAILED "
+                                     "- cmd %d out of %d",
+                                     j, i, NUM_CMDS );
+                            errlCommit( err,
+                                        EEPROM_COMP_ID );
+                            delete err;
+                            fails++;
+                            continue;
+                        }
+
+
+                        // Handle loop-specific results
+
+                        // For Loop 1: save original data
+                        if ( j == 1 )
+                        {
+                            memcpy(original_data, testBuffer, testBufLen);
+
+                            TRACUCOMP(g_trac_eeprom,"testEEPROMReadWriteLarge:"
+                                      " saving original data. i=%d, j=%d",
+                                      i, j);
+                        }
+
+                        // For Loop 3: compare new data
+                        if ( j == 3 )
+                        {
+                            // Compare the data
+                            if ( memcmp(testBuffer, new_data, testBufLen) )
+                            {
+                                TRACFCOMP(g_trac_eeprom,
+                                          "testEEPROMReadWriteLarge: MISCOMPARE"
+                                          " of new data, len=0x%X", testBufLen);
+
+                                TRACFBIN( g_trac_eeprom, "testBuffer=",
+                                          testBuffer, testBufLen);
+                                TRACFBIN( g_trac_eeprom, "new_data=",
+                                          new_data, testBufLen);
+                                TS_FAIL( "testEEPROMReadWriteLarge - MISCOMPARE"
+                                         " on writing new data");
+                                fails++;
+
+                                // Don't break - try to write back original data
+                                continue;
+                            }
+                            else
+                            {
+                                TRACUCOMP(g_trac_eeprom,
+                                          "testEEPROMReadWriteLarge: New "
+                                          "Data R/W Successful i=%d,j=%d",
+                                          i, j);
+                            }
+                        }
+
+
+                        // For Loop 5: compare writing-back original data
+                        if ( j == 5 )
+                        {
+                            // Compare the data
+                            if ( memcmp(testBuffer, original_data, testBufLen) )
+                            {
+                                TRACFCOMP(g_trac_eeprom,
+                                          "testEEPROMReadWriteLarge: MISCOMPARE"
+                                          " of original data, len=0x%X",
+                                          testBufLen);
+
+                                TRACFBIN( g_trac_eeprom, "testBuffer=",
+                                          testBuffer, testBufLen);
+                                TRACFBIN( g_trac_eeprom, "orig_data=",
+                                          original_data, testBufLen);
+
+                                TS_FAIL( "testEEPROMReadWriteLarge - MISCOMPARE"
+                                         " on writing back original data");
+                                fails++;
+
+                                break;
+                            }
+                            else
+                            {
+                                TRACUCOMP(g_trac_eeprom,
+                                          "testEEPROMReadWriteLarge: Original "
+                                          "Data R/W Successful i=%d,j=%d",
+                                          i, j);
+                            }
+                        }
+
+                    }  // end of 'j' loop: 5 ops per target
+
+                }  // end of 'i' loop: target loop
+
+            } while( 0 );
 
             TRACFCOMP( g_trac_eeprom,
-                       "testEEPROMReadWrite - %d/%d fails",
+                       "testEEPROMReadWriteLarge - End: %d/%d fails",
                        fails, num_ops );
         }
 
@@ -310,6 +469,9 @@ class EEPROMTest: public CxxTest::TestSuite
             uint64_t data = 0x0ull;
             size_t dataSize = 8;
 
+            TRACFCOMP( g_trac_eeprom,
+                       "testEEPROMInvalidOperation - Start" );
+
             do
             {
                 // Get a processor Target
@@ -318,10 +480,9 @@ class EEPROMTest: public CxxTest::TestSuite
                 tS.masterProcChipTargetHandle( testTarget );
                 assert(testTarget != NULL);
 
-                // Skip this target if EEPROM isn't available or target is non
-                // functional
-                if( !isI2CAvailable( testTarget )  ||
-                    !testTarget->getAttr<TARGETING::ATTR_HWAS_STATE>().functional)
+                // Skip this target if target is non-functional
+                if(!testTarget->getAttr<TARGETING::ATTR_HWAS_STATE>().\
+                                                   functional)
                 {
                     continue;
                 }
@@ -337,23 +498,96 @@ class EEPROMTest: public CxxTest::TestSuite
                 if( NULL == err )
                 {
                     fails++;
-                    TS_FAIL( "Error should've resulted in Operation type of LAST_OP_TYPE!" );
+                    TS_FAIL( "testEEPROMInvalidOperation - Error should've "
+                             " resulted in Operation type of LAST_OP_TYPE!" );
                 }
                 else
                 {
+                    TRACUCOMP(g_trac_eeprom, "testEEPROMInvalidOperation - "
+                              "Error log returned as expected. RC=0x%X",
+                              err->reasonCode() );
                     delete err;
                     err = NULL;
                 }
             } while( 0 );
             TRACFCOMP( g_trac_eeprom,
-                       "testEEPROMInvalidOperation - %d/%d fails",
+                       "testEEPROMInvalidOperation - End: %d/%d fails",
                        fails, num_ops );
         }
 
+
+        /**
+         * @brief EEPROM Overflow Test
+         *      This test will pass in a target which does not have an
+         *      EEPROM attribute associated with it.  It is expected that i
+         *      an error log is to be returned.
+         */
+        void testEEPROMOverflow ( void )
+        {
+            errlHndl_t err = NULL;
+            int64_t fails = 0, num_ops = 0;
+            uint64_t data = 0x0ull;
+            size_t dataSize = 0;
+            uint64_t offset = 0x0ull;
+
+            TRACFCOMP( g_trac_eeprom,
+                       "testEEPROMOverflow - Start" );
+
+            do
+            {
+                // Get a processor Target
+                TARGETING::TargetService& tS = TARGETING::targetService();
+                TARGETING::Target* testTarget = NULL;
+                tS.masterProcChipTargetHandle( testTarget );
+                assert(testTarget != NULL);
+
+                // Skip this target if target is non-functional
+                if(!testTarget->getAttr<TARGETING::ATTR_HWAS_STATE>()
+                                                   .functional)
+                {
+                    continue;
+                }
+
+                // Set max length and offset
+                dataSize = 0xFFFFFFFFFFFFFFFF;
+                offset = 0xFFFFFFFFFFFFFFFF;
+
+                num_ops++;
+                err = deviceOp( DeviceFW::WRITE,
+                                testTarget,
+                                &data,
+                                dataSize,
+                                DEVICE_EEPROM_ADDRESS( 0x0,
+                                                       offset ) );
+
+                if( NULL == err )
+                {
+                    fails++;
+                    TS_FAIL( "testEEPROMOverflow - Error should've "
+                             "resulted from overflow offset and length: "
+                             "offset=0x%X, length = 0x%x",
+                             offset, dataSize);
+                }
+                else
+                {
+                    TRACUCOMP(g_trac_eeprom, "testEEPROMOverflow - "
+                              "Error log returned as expectede. RC=0x%X",
+                              err->reasonCode() );
+                    delete err;
+                    err = NULL;
+                }
+            } while( 0 );
+
+            TRACFCOMP( g_trac_eeprom,
+                       "testEEPROMInvalidChip - End: %d/%d fails",
+                       fails, num_ops );
+        }
+
+
         /**
          * @brief EEPROM Invalid Chip Test
          *      This test will pass in an invalid chip identifier which should
-         *      result in an error being returned back from
+         *      result in an error being returned.
          */
         void testEEPROMInvalidChip ( void )
         {
@@ -362,19 +596,21 @@ class EEPROMTest: public CxxTest::TestSuite
             uint64_t data = 0x0ull;
             size_t dataSize = 8;
 
+            TRACFCOMP( g_trac_eeprom,
+                       "testEEPROMInvalidChip - Start" );
 
             do
             {
+
                 // Get a processor Target
                 TARGETING::TargetService& tS = TARGETING::targetService();
                 TARGETING::Target* testTarget = NULL;
                 tS.masterProcChipTargetHandle( testTarget );
                 assert(testTarget != NULL);
 
-                // Skip this target if EEPROM isn't available. or target is non
-                // functional
-                if( !isI2CAvailable( testTarget )  ||
-                    !testTarget->getAttr<TARGETING::ATTR_HWAS_STATE>().functional)
+                // Skip this target if target is non-functional
+                if(!testTarget->getAttr<TARGETING::ATTR_HWAS_STATE>()
+                                                   .functional)
                 {
                     continue;
                 }
@@ -390,21 +626,28 @@ class EEPROMTest: public CxxTest::TestSuite
                 if( NULL == err )
                 {
                     fails++;
-                    TS_FAIL( "Error should've resulted in using EEPROM chip %d!",
+                    TS_FAIL( "testEEPROMInvalidChip - Error should've "
+                             "resulted in using EEPROM chip %d!",
                              LAST_CHIP_TYPE );
                 }
                 else
                 {
+                    TRACUCOMP(g_trac_eeprom, "testEEPROMInvalidChip - "
+                              "Error log returned as expected. RC=0x%x ",
+                              err->reasonCode() );
                     delete err;
                     err = NULL;
                 }
+
             } while( 0 );
 
             TRACFCOMP( g_trac_eeprom,
-                       "testEEPROMInvalidChip - %d/%d fails",
+                       "testEEPROMInvalidChip - End: %d/%d fails",
                        fails, num_ops );
         }
 
+
+
 };
 
 #endif
diff --git a/src/usr/i2c/test/i2ctest.H b/src/usr/i2c/test/i2ctest.H
index 12b12385f..15fe1f226 100755
--- a/src/usr/i2c/test/i2ctest.H
+++ b/src/usr/i2c/test/i2ctest.H
@@ -35,6 +35,7 @@
 #include <errl/errlentry.H>
 #include <devicefw/driverif.H>
 #include <i2c/i2creasoncodes.H>
+#include <i2c/i2cif.H>
 #include <targeting/common/predicates/predicates.H>
 #include <targeting/common/attributes.H>
 
@@ -50,33 +51,6 @@ using namespace TARGETING;
 // Used to ignore comparing data on reads
 #define I2C_TEST_IGNORE_DATA_COMPARE 0xFFFFFFFFFFFFFFFF
 
-// @todo RTC:72715: Re-visit the use of this function when we have full
-// Attribute support
-bool isI2CAvailable( TARGETING::Target * i_target )
-{
-    bool avail = true;
-
-    // Rudimentary Check - Every I2C Master has VPD Primary Attribute
-    EepromVpdPrimaryInfo eepromData;
-    if( i_target->tryGetAttr<ATTR_EEPROM_VPD_PRIMARY_INFO>( eepromData ) )
-    {
-
-        if( ( 0x80 == eepromData.port ) &&
-            ( 0x80 == eepromData.devAddr ) &&
-            ( 0x80 == eepromData.engine ) )
-        {
-            // Default values, thus, not present
-            avail = false;
-        }
-    }
-    else
-    {
-        // Didn't find attribute, thus, not present
-        avail = false;
-    }
-
-    return avail;
-}
 
 class I2CTest: public CxxTest::TestSuite
 {
@@ -296,28 +270,21 @@ class I2CTest: public CxxTest::TestSuite
                             break;
 
                         default:
-                            TS_FAIL( "Invalid Chip type specificed in testData!" );
+                            TS_FAIL( "testI2CDirect - Invalid Chip type "
+                                     "specificed in testData!" );
                             fails++;
                             continue;
                             break;
                     };
 
-                    // Check to see if I2C function is there
-                    if( !isI2CAvailable( theTarget ) )
-                    {
-                        TRACFCOMP( g_trac_i2c,
-                               "testI2CDirect Operation - no i2c function" );
-                        continue;
-                    }
-
-                    // check to see if the target is functional before we
+                    // Check to see if the target is functional before we
                     // continue..
                     if
                         (!theTarget->getAttr<TARGETING::ATTR_HWAS_STATE>().functional)
                     {
 
                         TRACFCOMP( g_trac_i2c,
-                            "testI2CDirect Operation - target not functional");
+                            "testI2CDirect - target not functional");
 
                         continue;
                     }
@@ -363,7 +330,7 @@ class I2CTest: public CxxTest::TestSuite
             } while( 0 );
 
             TRACFCOMP( g_trac_i2c,
-                       "testI2CDirect - %d/%d fails",
+                       "testI2CDirect - End: %d/%d fails",
                        fails, cmds );
         }
 
@@ -494,29 +461,22 @@ class I2CTest: public CxxTest::TestSuite
                             break;
 
                         default:
-                            TS_FAIL( "Invalid Chip type specificed in testData!" );
+                            TS_FAIL( "testI2COffset - Invalid Chip type "
+                                     "specificed in testData!" );
                             fails++;
                             continue;
                             break;
                     };
 
 
-                    // Check to see if I2C function is there
-                    if( !isI2CAvailable( theTarget ) )
-                    {
-                        TRACFCOMP( g_trac_i2c,
-                               "testI2COfset Operation - no i2c function" );
-                        continue;
-                    }
-
-                    // check to see if the target is functional before we
+                    // Check to see if the target is functional before we
                     // continue..
                     if
                         (!theTarget->getAttr<TARGETING::ATTR_HWAS_STATE>().functional)
                     {
 
                         TRACFCOMP( g_trac_i2c,
-                            "testI2COffset Operation - target not functional");
+                            "testI2COffset - target not functional");
 
                         continue;
                     }
@@ -603,7 +563,8 @@ class I2CTest: public CxxTest::TestSuite
                                     "Data Compare Fail: wrote=%016llx, "
                                     "read back=%016llx. cmd: %d/%d (%d)",
                                     testData[i].data, data, i, NUM_CMDS, j);
-                                TS_FAIL( "testI2COffset - Failure comparing new data!" );
+                                TS_FAIL( "testI2COffset - Failure comparing "
+                                         "new data!" );
                                 fails++;
 
                                 // Don't break - try to write back original data
@@ -626,7 +587,8 @@ class I2CTest: public CxxTest::TestSuite
                                     "Data Compare Fail: original=%016llx, "
                                     "read back=%016llx. cmd: %d/%d (%d)",
                                     original_data, data, i, NUM_CMDS, j);
-                                TS_FAIL( "testI2COffset - Failure comparing original data!" );
+                                TS_FAIL( "testI2COffset - Failure comparing "
+                                         "original data!" );
                                 fails++;
 
                                 // Break: stop testing if we can't write back
@@ -642,11 +604,41 @@ class I2CTest: public CxxTest::TestSuite
             } while( 0 );
 
             TRACFCOMP( g_trac_i2c,
-                       "testI2COffset - %d/%d fails",
+                       "testI2COffset - End: %d/%d fails",
                        fails, cmds );
         }
 
 
+        /**
+         * @brief Call I2C Setup Masters Function
+         *      This function is part of the shutdown path and is
+         *      needed by PHYP to ensure that the I2C masters are
+         *      setup correctly on the system.
+         */
+        void testI2CSetupMasters ( void )
+        {
+            errlHndl_t err = NULL;
+            int fails = 0;
+            const int NUM_CMDS = 1;
+
+            TRACFCOMP( g_trac_i2c,
+                       "testI2CSetupMasters - Start" );
+
+            err = I2C::i2cSetupMasters();
+
+            if( err )
+            {
+                TS_FAIL( "testI2CSetupMasters - Error returned from "
+                         "i2cSetupMasters()");
+                fails++;
+                delete err;
+            }
+
+            TRACFCOMP( g_trac_i2c,
+                       "testI2CSetupMasters - End: %d/%d fails",
+                       fails, NUM_CMDS );
+        }
+
 
         /**
          * @brief I2C Invalid Target test
@@ -678,7 +670,8 @@ class I2CTest: public CxxTest::TestSuite
 
             if( !err )
             {
-                TS_FAIL( "Failure to return error using Master Sentinel Chip!" );
+                TS_FAIL( "testI2CInvalidTarget - Failure to return error "
+                         "using Master Sentinel Chip!" );
                 fails++;
             }
             else
@@ -688,7 +681,7 @@ class I2CTest: public CxxTest::TestSuite
             }
 
             TRACFCOMP( g_trac_i2c,
-                       "testI2CInvalidTarget - %d/%d fails",
+                       "testI2CInvalidTarget - End: %d/%d fails",
                        fails, NUM_CMDS );
         }
 
@@ -704,6 +697,9 @@ class I2CTest: public CxxTest::TestSuite
             uint64_t data = 0x0ull;
             size_t dataSize = 8;
 
+            TRACFCOMP( g_trac_i2c,
+                       "testI2CInvalidOperation - Start" );
+
             do
             {
                 // Get a processor Target
@@ -712,15 +708,6 @@ class I2CTest: public CxxTest::TestSuite
                 tS.masterProcChipTargetHandle( testTarget );
                 assert(testTarget != NULL);
 
-                // Check to see if I2C function is there
-                if( !isI2CAvailable( testTarget ) )
-                {
-                    TRACFCOMP( g_trac_i2c,
-                               "testI2CInvalid Operation - no i2c function" );
-
-
-                    continue;
-                }
 
                 // check to see if the target is functional before we
                 // continue..
@@ -728,7 +715,7 @@ class I2CTest: public CxxTest::TestSuite
                     (!testTarget->getAttr<TARGETING::ATTR_HWAS_STATE>().functional)
                 {
                     TRACFCOMP( g_trac_i2c,
-                               "testI2CInvalide Operation - not functional" );
+                               "testI2CInvalidOperation - not functional" );
 
 
                     continue;
@@ -746,7 +733,8 @@ class I2CTest: public CxxTest::TestSuite
                 if( NULL == err )
                 {
                     fails++;
-                    TS_FAIL( "Error should've resulted in Operation type of LAST_OP_TYPE!" );
+                    TS_FAIL( "testI2CInvalidOperation - Error should've "
+                             "resulted in Operation type of LAST_OP_TYPE!" );
                 }
                 else
                 {
@@ -755,7 +743,7 @@ class I2CTest: public CxxTest::TestSuite
                 }
             } while( 0 );
             TRACFCOMP( g_trac_i2c,
-                       "testI2CInvalidOperation - %d/%d fails",
+                       "testI2CInvalidOperation - End: %d/%d fails",
                        fails, num_ops );
         }
 
diff --git a/src/usr/targeting/common/genHwsvMrwXml.pl b/src/usr/targeting/common/genHwsvMrwXml.pl
index aff21e4a8..9d167f23e 100755
--- a/src/usr/targeting/common/genHwsvMrwXml.pl
+++ b/src/usr/targeting/common/genHwsvMrwXml.pl
@@ -42,7 +42,6 @@
 #   This perl script processes the various xml files of the MRW to
 #   extract the needed information for generating the final xml file.
 #
-
 use strict;
 use XML::Simple;
 use Data::Dumper;
@@ -1948,6 +1947,10 @@ sub generate_proc
     #TODO RTC [59707]
     #Update Lane equalization values
 
+    # add EEPROM attributes
+    addEeproms($sys, $node, $proc);
+
+
     # fsp-specific proc attributes
     do_plugin('fsp_proc', $scompath, $scomsize, $scanpath, $scansize,
             $node, $proc, $fruid, $ipath, $hwTopology, $mboxpath, $mboxsize,
@@ -2787,6 +2790,113 @@ sub addProcPcieAttrs
     }
 }
 
+# RTC 80614 - these values will eventually be pulled from the MRW
+sub addEeproms
+{
+    my ($sys, $node, $proc) = @_;
+
+    my $id_name eq "";
+    my $port = 0;
+    my $devAddr = 0x00;
+    my $mur_num = $proc % 2;
+
+
+    for my $i (0 .. 3)
+    {
+        # Loops on $i
+        # %i = 0 -> EEPROM_VPD_PRIMARY_INFO
+        # %i = 1 -> EEPROM_VPD_BACKUP_INFO
+        # %i = 2 -> EEPROM_SBE_PRIMARY_INFO
+        # %i = 3 -> EEPROM_SBE_BACKUP_INFO
+
+        # no EEPROM_VPD_BACKUP on Murano
+        if ( ($i eq 1) && ($CHIPNAME eq "murano"))
+        {
+            next;
+        }
+
+
+        if($CHIPNAME eq "murano")
+        {
+            if ($i eq 0 )
+            {
+                $id_name = "EEPROM_VPD_PRIMARY_INFO";
+                $port    = 1;
+
+                if ($mur_num eq 0)
+                {
+                    $devAddr = 0xA4;
+                }
+                else
+                {
+                    $devAddr = 0xA6;
+                }
+            }
+
+            # $i = 1: EEPROM_VPD_BACKUP_INFO skipped above
+
+            elsif ($i eq 2 )
+            {
+                $id_name = "EEPROM_SBE_PRIMARY_INFO";
+                $port    = 0;
+                $devAddr = 0xAC;
+            }
+            elsif ($i eq 3 )
+            {
+                $id_name = "EEPROM_SBE_BACKUP_INFO";
+                $port    = 0;
+                $devAddr = 0xAE;
+            }
+        }
+
+        elsif ($CHIPNAME eq "venice")
+        {
+            if ($i eq 0 )
+            {
+                $id_name = "EEPROM_VPD_PRIMARY_INFO";
+                $port    = 0;
+                $devAddr = 0xA0;
+            }
+            elsif ($i eq 1 )
+            {
+                $id_name = "EEPROM_VPD_BACKUP_INFO";
+                $port    = 1;
+                $devAddr = 0xA0;
+            }
+            elsif ($i eq 2 )
+            {
+                $id_name = "EEPROM_SBE_PRIMARY_INFO";
+                $port    = 0;
+                $devAddr = 0xA2;
+            }
+            elsif ($i eq 3 )
+            {
+                $id_name = "EEPROM_SBE_BACKUP_INFO";
+                $port    = 1;
+                $devAddr = 0xA2;
+            }
+        }
+
+        # make devAddr show as a hex number
+        my $devAddr_hex = sprintf("0x%02X", $devAddr);
+
+        print "    <attribute>\n";
+        print "        <id>$id_name</id>\n";
+        print "        <default>\n";
+        print "            <field><id>i2cMasterPath</id><value>physical:sys-$sys/node-$node/proc-$proc</value></field>\n";
+        print "             <field><id>port</id><value>$port</value></field>\n";
+        print "             <field><id>devAddr</id><value>$devAddr_hex</value></field>\n";
+        print "             <field><id>engine</id><value>0</value></field>\n";
+        print "             <field><id>byteAddrOffset</id><value>0x02</value></field>\n";
+        print "             <field><id>maxMemorySizeKB</id><value>0x40</value></field>\n";
+        print "             <field><id>writePageSize</id><value>0x80</value></field>\n";
+        print "        </default>\n";
+        print "    </attribute>\n";
+    }
+
+}
+
+
 sub display_help
 {
     use File::Basename;
diff --git a/src/usr/targeting/common/xmltohb/attribute_types.xml b/src/usr/targeting/common/xmltohb/attribute_types.xml
index bc1a530ef..3f0f253fd 100644
--- a/src/usr/targeting/common/xmltohb/attribute_types.xml
+++ b/src/usr/targeting/common/xmltohb/attribute_types.xml
@@ -1052,6 +1052,28 @@
             <type>uint8_t</type>
             <default>0x80</default>
         </field>
+        <field>
+            <name>byteAddrOffset</name>
+            <description>The number of bytes a device requires to set its
+                         internal address/offset.</description>
+            <type>uint8_t</type>
+            <default>0x02</default>
+        </field>
+        <field>
+            <name>maxMemorySizeKB</name>
+            <description>The number of kilobytes a device can hold.  'Zero'
+                         value possible for some devices.</description>
+            <type>uint64_t</type>
+            <default>0x0</default>
+        </field>
+        <field>
+            <name>writePageSize</name>
+            <description>The maximum number of bytes that can be written to
+                         a device at one time. 'Zero' value means no maximum
+                         value is expected or checked.</description>
+            <type>uint64_t</type>
+            <default>0x0</default>
+        </field>
     </complexType>
     <persistency>non-volatile</persistency>
     <readable/>
@@ -1091,6 +1113,28 @@
             <type>uint8_t</type>
             <default>0x80</default>
         </field>
+        <field>
+            <name>byteAddrOffset</name>
+            <description>The number of bytes a device requires to set its
+                         internal address/offset.</description>
+            <type>uint8_t</type>
+            <default>0x02</default>
+        </field>
+        <field>
+            <name>maxMemorySizeKB</name>
+            <description>The number of kilobytes a device can hold.  'Zero'
+                         value possible for some devices.</description>
+            <type>uint64_t</type>
+            <default>0x0</default>
+        </field>
+        <field>
+            <name>writePageSize</name>
+            <description>The maximum number of bytes that can be written to
+                         a device at one time. 'Zero' value means no maximum
+                         value is expected or checked.</description>
+            <type>uint64_t</type>
+            <default>0x0</default>
+        </field>
     </complexType>
     <persistency>non-volatile</persistency>
     <readable/>
@@ -1130,6 +1174,28 @@
             <type>uint8_t</type>
             <default>0x80</default>
         </field>
+        <field>
+            <name>byteAddrOffset</name>
+            <description>The number of bytes a device requires to set its
+                         internal address/offset.</description>
+            <type>uint8_t</type>
+            <default>0x02</default>
+        </field>
+        <field>
+            <name>maxMemorySizeKB</name>
+            <description>The number of kilobytes a device can hold.  'Zero'
+                         value possible for some devices.</description>
+            <type>uint64_t</type>
+            <default>0x0</default>
+        </field>
+        <field>
+            <name>writePageSize</name>
+            <description>The maximum number of bytes that can be written to
+                         a device at one time. 'Zero' value means no maximum
+                         value is expected or checked.</description>
+            <type>uint64_t</type>
+            <default>0x0</default>
+        </field>
     </complexType>
     <persistency>non-volatile</persistency>
     <readable/>
@@ -1169,6 +1235,28 @@
             <type>uint8_t</type>
             <default>0x80</default>
         </field>
+        <field>
+            <name>byteAddrOffset</name>
+            <description>The number of bytes a device requires to set its
+                         internal address/offset.</description>
+            <type>uint8_t</type>
+            <default>0x02</default>
+        </field>
+        <field>
+            <name>maxMemorySizeKB</name>
+            <description>The number of kilobytes a device can hold.  'Zero'
+                         value possible for some devices.</description>
+            <type>uint64_t</type>
+            <default>0x0</default>
+        </field>
+        <field>
+            <name>writePageSize</name>
+            <description>The maximum number of bytes that can be written to
+                         a device at one time. 'Zero' value means no maximum
+                         value is expected or checked.</description>
+            <type>uint64_t</type>
+            <default>0x0</default>
+        </field>
     </complexType>
     <persistency>non-volatile</persistency>
     <readable/>
diff --git a/src/usr/targeting/common/xmltohb/simics_MURANO.system.xml b/src/usr/targeting/common/xmltohb/simics_MURANO.system.xml
index c831d37be..9c21b2440 100644
--- a/src/usr/targeting/common/xmltohb/simics_MURANO.system.xml
+++ b/src/usr/targeting/common/xmltohb/simics_MURANO.system.xml
@@ -451,6 +451,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA4</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -460,6 +463,9 @@
              <field><id>port</id><value>0xFF</value></field>
              <field><id>devAddr</id><value>0xFF</value></field>
              <field><id>engine</id><value>0xFF</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -469,6 +475,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xAC</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -478,6 +487,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xAE</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -1201,6 +1213,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA6</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -1210,6 +1225,9 @@
              <field><id>port</id><value>0xFF</value></field>
              <field><id>devAddr</id><value>0xFF</value></field>
              <field><id>engine</id><value>0xFF</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -1219,6 +1237,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xAC</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -1228,6 +1249,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xAE</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -1950,6 +1974,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA4</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -1959,6 +1986,9 @@
              <field><id>port</id><value>0xFF</value></field>
              <field><id>devAddr</id><value>0xFF</value></field>
              <field><id>engine</id><value>0xFF</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -1968,6 +1998,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xAC</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -1977,6 +2010,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xAE</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -2701,6 +2737,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA6</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -2710,6 +2749,9 @@
              <field><id>port</id><value>0xFF</value></field>
              <field><id>devAddr</id><value>0xFF</value></field>
              <field><id>engine</id><value>0xFF</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -2719,6 +2761,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xAC</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -2728,6 +2773,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xAE</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -3285,6 +3333,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -3395,6 +3446,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -3505,6 +3559,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -3615,6 +3672,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -3724,6 +3784,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -3834,6 +3897,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -3944,6 +4010,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -4054,6 +4123,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -4163,6 +4235,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -4273,6 +4348,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -4383,6 +4461,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -4493,6 +4574,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -4602,6 +4686,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -4712,6 +4799,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -4822,6 +4912,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -4932,6 +5025,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
diff --git a/src/usr/targeting/common/xmltohb/simics_VENICE.system.xml b/src/usr/targeting/common/xmltohb/simics_VENICE.system.xml
index c96ca606c..13c8c3b3d 100644
--- a/src/usr/targeting/common/xmltohb/simics_VENICE.system.xml
+++ b/src/usr/targeting/common/xmltohb/simics_VENICE.system.xml
@@ -427,6 +427,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -436,6 +439,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -445,6 +451,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA2</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -454,6 +463,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA2</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -1540,6 +1552,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -1549,6 +1564,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -1558,6 +1576,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA2</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -1567,6 +1588,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA2</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -2653,6 +2677,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -2662,6 +2689,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -2671,6 +2701,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA2</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -2680,6 +2713,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA2</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -3766,6 +3802,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -3775,6 +3814,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -3784,6 +3826,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA2</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -3793,6 +3838,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA2</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -4878,6 +4926,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -4887,6 +4938,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -4896,6 +4950,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA2</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -4905,6 +4962,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA2</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -5959,6 +6019,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -5968,6 +6031,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -5977,6 +6043,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA2</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -5986,6 +6055,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA2</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -7038,6 +7110,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -7047,6 +7122,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -7056,6 +7134,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA2</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -7065,6 +7146,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA2</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -8117,6 +8201,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -8126,6 +8213,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -8135,6 +8225,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA2</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
     <attribute>
@@ -8144,6 +8237,9 @@
              <field><id>port</id><value>1</value></field>
              <field><id>devAddr</id><value>0xA2</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x40</value></field>
+             <field><id>writePageSize</id><value>0x80</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -9028,6 +9124,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -9138,6 +9237,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -9248,6 +9350,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -9358,6 +9463,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -9468,6 +9576,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -9578,6 +9689,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -9688,6 +9802,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -9798,6 +9915,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -9908,6 +10028,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -10018,6 +10141,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -10128,6 +10254,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -10238,6 +10367,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -10348,6 +10480,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -10458,6 +10593,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -10568,6 +10706,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -10678,6 +10819,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -10788,6 +10932,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -10898,6 +11045,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -11008,6 +11158,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -11118,6 +11271,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -11228,6 +11384,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -11338,6 +11497,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -11448,6 +11610,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -11558,6 +11723,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -11668,6 +11836,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -11778,6 +11949,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -11888,6 +12062,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -11998,6 +12175,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -12108,6 +12288,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -12218,6 +12401,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -12328,6 +12514,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -12438,6 +12627,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
      <attribute><id>EI_BUS_TX_MSBSWAP</id>
@@ -12548,6 +12740,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -12655,6 +12850,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -12762,6 +12960,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -12869,6 +13070,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -12976,6 +13180,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -13083,6 +13290,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -13190,6 +13400,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -13297,6 +13510,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -13404,6 +13620,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -13511,6 +13730,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -13618,6 +13840,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -13725,6 +13950,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -13832,6 +14060,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -13939,6 +14170,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -14046,6 +14280,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -14153,6 +14390,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -14260,6 +14500,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -14367,6 +14610,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -14474,6 +14720,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -14581,6 +14830,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -14688,6 +14940,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -14795,6 +15050,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -14902,6 +15160,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -15009,6 +15270,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -15116,6 +15380,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -15223,6 +15490,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -15330,6 +15600,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -15437,6 +15710,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -15544,6 +15820,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -15651,6 +15930,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -15758,6 +16040,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
@@ -15865,6 +16150,9 @@
              <field><id>port</id><value>0</value></field>
              <field><id>devAddr</id><value>0xA0</value></field>
              <field><id>engine</id><value>0</value></field>
+             <field><id>byteAddrOffset</id><value>0x02</value></field>
+             <field><id>maxMemorySizeKB</id><value>0x04</value></field>
+             <field><id>writePageSize</id><value>0x20</value></field>
          </default>
      </attribute>
 </targetInstance>
diff --git a/src/usr/targeting/common/xmltohb/target_types.xml b/src/usr/targeting/common/xmltohb/target_types.xml
index 76a8f12ff..d6b8bb657 100644
--- a/src/usr/targeting/common/xmltohb/target_types.xml
+++ b/src/usr/targeting/common/xmltohb/target_types.xml
@@ -1256,7 +1256,6 @@
         <default>0x00000003</default> <!--GARD | MEMDIAG -->
     </attribute>
 
-    <!-- Defaulting this info to the one Simics Dummy device that we have -->
     <attribute><id>EEPROM_VPD_PRIMARY_INFO</id></attribute>
 
     <attribute><id>VPD_REC_NUM</id></attribute>