talos-hostboot/src/usr/errl/runtime, branch master

Add deconfigTargetAtRuntime interface

2018-04-12T20:31:07+00:00

-PRD will call this function in response to a core unit checkstop detected by PHYP. The new function will mark the core as non-functional and call a hardware procdure to update the multicast groups for cores and chiplets. The procedure will also update the OCC core configuration status and the quad core status registers which reflect the number of enable cores/quad in the system at runtime. Change-Id: Ia7fc3f47dc1fee1f84d877d3d56b609d1aee1b17 RTC:188918 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/55154 Tested-by: Jenkins Server Reviewed-by: Richard Ward Reviewed-by: Christian R. Geddes Tested-by: FSP CI Jenkins Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Reviewed-by: William G. Hoffa

Fix EID range for HBRT logs

2018-03-10T04:44:47+00:00

Add back in the lost 0x89 subsystem specifier to the HBRT error logs. Change-Id: Idf9a5a90e79137df3745e5a3d387255e5c87f715 CQ: SW420482 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/55364 Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins Reviewed-by: Daniel M. Crowell

Initialize FIRDATA section and ErrlManager just incase BMC resets

2018-03-07T17:54:24+00:00

PRD needs to read the PNOR to tell OCC where to write in the pnor. This will cache the PNOR section so PRD will not fail the read call. If an error is created with pnor inaccessible, errl manager could get stuck unless it was initialized first. Change-Id: Ia7212bf99e947a1016423b37aff6f13ddfc7190a CQ:SW412798 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/54990 Reviewed-by: Martin Gloff Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Reviewed-by: Roland Veloz Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins CI-Ready: Daniel M. Crowell Reviewed-by: Daniel M. Crowell

Fix rollover of PLID numbers

2018-02-21T21:28:18+00:00

Need to avoid incrementing into the processor node field of the PLID. Decided to use the highest bit in the last 3 bytes as a dividing bit. [0x##800000 - 0x##FFFFFF] -- for pre-boot setup errors. [0x##000000 - 0x##7FFFFF] -- for post setup errors When setting up from PNOR, we will look for the max EID in the post-setup range. If no max is found, restart at 0. Change-Id: I4a8811d9c93039090504ca9cf8c0eebc6812a4ca CQ:SW416592 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/54362 Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins Reviewed-by: Daniel M. Crowell

Handles FSP reset-reload in HBRT messages

2017-12-21T05:12:25+00:00

For every instance where a firmware_request is made, it is possible to get an error if the FSP is doing a reset/reload. Now, if an error returned from the firmware_request call indicates that the FSP is doing a reset/reload, the firmware_request call will be made again. Also refactored the code. Consolidated the calls to firmware_request to another file to facilitate the adding/updating of messages. Change-Id: I5be440927ab255c55b40a0a0ed26f786d31a9317 RTC:182606 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/50505 Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Reviewed-by: Daniel M. Crowell

Log traces to error logs in HBRT

2017-10-20T02:17:55+00:00

This enables buffer tracing at hostboot runtime. Will add these traces to runtime errors for better debug Change-Id: I795bb7deafdd02adea4588ebf8dfb11cbce116a0 RTC:172770 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/48084 Tested-by: Jenkins Server Reviewed-by: Christian R. Geddes Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins Reviewed-by: Martin Gloff Reviewed-by: Daniel M. Crowell

Added code to send an Error Log to FSP via the firmware_request

2017-09-18T19:33:08+00:00

Change-Id: I6ce94d9cbf62fa7d2afe53b83b6bc5588a39a5d6 RTC:178947 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/45442 Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: FSP CI Jenkins Tested-by: Jenkins OP HW Reviewed-by: ILYA SMIRNOV Reviewed-by: Daniel M. Crowell

Undo hbrt errl into pnor workaround

2017-07-07T19:32:11+00:00

Change-Id: I0c00eb1a400410a72cabb89d57d80e70d0ab3ebe RTC: 131067 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/42657 Tested-by: Jenkins Server Reviewed-by: Martin Gloff Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins Reviewed-by: Corey V. Swenson Reviewed-by: Nicholas E. Bofferding

Propagate attribute overrides up to the HBRT code

2017-04-17T01:32:17+00:00

Attribute overrides are stored in a separate tank of memory from the regular attribute values. This tank will be added as an additional reserved memory section for HBRT to consume (only if overrides exist). Also fixed a couple bugs encountered while testing: - No longer crashes if an error is created inside the targeting initialization code. - Added reserved bytes to RHB definition. Change-Id: I5b10f7ad8dfcb58c550868bb83c4d843f48e1aae RTC: 169942 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/38547 Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: FSP CI Jenkins Reviewed-by: Corey V. Swenson Reviewed-by: Martin Gloff Reviewed-by: Christian R. Geddes Reviewed-by: Daniel M. Crowell

Revert "Adding in support for PHYP SRC and all 9 words"

2017-03-23T19:24:17+00:00

This reverts commit a0c2aa6132a0b49975327f5aa9238d1d3e2b750b. Change-Id: I6cfe36de59e6981ff23aa7d9aea1474f14729d2d Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/38362 Tested-by: Jenkins Server Tested-by: FSP CI Jenkins Reviewed-by: Daniel M. Crowell