talos-hostboot/src/include/usr/ipmi, branch master

Get SN from BMC and update into PVPD EEPROM

2018-05-19T21:09:16+00:00

Resolves #135 Change-Id: I46b5c2208ed28822c6001a955f4056d976e79339 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/58010 Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins Reviewed-by: Daniel M. Crowell

Enable super-long watchdog timer when console traces are enabled

2018-05-02T17:53:54+00:00

When console traces are enabled, the boot takes significantly longer than usual. Our standard watchdog timeout of 2 minutes is not sufficient. Made the following changes: - Tied the enablement of the long timeout to the CONFIG flags for console traces - Increased the timeout to 1 hour (from 40 minutes) since this is lab only and false positives are the worst... - Added a couple clarifying traces to make future watchdog debug simpler Change-Id: I92bb0b07cb77a13cb390450999b285f2ad74168d CQ: SW425407 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57580 Reviewed-by: Martin Gloff Reviewed-by: Richard J. Knight Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: FSP CI Jenkins Reviewed-by: Christian R. Geddes Tested-by: Jenkins OP HW Reviewed-by: William G. Hoffa

Fix setting hbVolatile and RebootControl sensors

2018-01-16T16:34:14+00:00

Setting sensor to 2 equates to BMC setting of 1, Setting sensor to 1 equates to BMC setting of 0. Change-Id: Ib3c4b4a144a8fad5bd4f93be88bbe0ff7476ab64 RTC: 180772 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/51787 Tested-by: Jenkins Server Reviewed-by: Adriana Kobylak Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins Reviewed-by: Christian R. Geddes Reviewed-by: Daniel M. Crowell

Add HB_VOLATILE sensor so OpenBMC can mark volatile sections

2017-12-21T21:51:42+00:00

Set sensor to 1 to tell OpenBMC code to allow hostboot volatile section to be cleared. RTC: 180772 Change-Id: Id63e3ae8a24facd5e01e8bf94688a60f066ba838 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/51101 Tested-by: Jenkins Server Tested-by: FSP CI Jenkins Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Reviewed-by: Martin Gloff Reviewed-by: Christian R. Geddes Reviewed-by: William G. Hoffa

Increase error log size to 4K for obmc systems

2017-12-11T22:57:33+00:00

Change-Id: I63f4dfd21080693aaf7eabe682fa597b40f7d77b RTC: 182608 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/50603 Reviewed-by: Matt Derksen Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins Reviewed-by: Christian R. Geddes Reviewed-by: Daniel M. Crowell

Send down OCC info logs to BMC for call-home

2017-11-09T22:47:52+00:00

This creates a new eSEL type (dd) to display informational callhome logs. The OCC will send down telemetry information to track the general health of the system using this new log. Change-Id: I0319798554c4e48c287953bd2d0de8352bfc4909 RTC:180324 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/48776 Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins Reviewed-by: Brian E. Bakke Reviewed-by: Christian R. Geddes Reviewed-by: William G. Hoffa

Control Host reboots for manufacturing

2017-11-06T16:20:30+00:00

In a manufacturing environment it is desired to reboot once (and only once) to get the FIRDATA analysis on checkstop. This commit adds functionality to control the auto reboot policy on the BMC. It then "remembers" the state using the HB VOLATILE PNOR partition to enable reboots when in MFG mode. Note that when in this mode, any reboot (even from host) will terminate the boot. Change-Id: If5ce133b59e10c659d7024d1ae08a40988e35190 RTC:180772 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/48116 Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins Reviewed-by: Corey V. Swenson Reviewed-by: Dean Sanner Reviewed-by: Christian R. Geddes

ipmi: add support for reading SEL time from BMC

2017-10-31T03:42:26+00:00

The SEL time is used as the equivalent of the RTC on OpenPOWER platforms and can be used to timestamp events. Resolves #116 Signed-off-by: Robert Lippert Change-Id: I2cc7f3054e0d58fa3e2d083005d0f4e05adf8d2f Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/48375 Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: FSP CI Jenkins Tested-by: Jenkins OP HW Reviewed-by: Richard J. Knight Reviewed-by: Daniel M. Crowell

Remove NETFUN_AMI from ipmiif.H

2017-10-12T03:22:22+00:00

Change-Id: Ic46fc04f682554e2aa9f7bfafa09cd667574825f RTC:180471 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/47018 Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: Jenkins OP HW Tested-by: FSP CI Jenkins Reviewed-by: William G. Hoffa Reviewed-by: Prachi Gupta Reviewed-by: Daniel M. Crowell

New OCC/HTMGT interfaces for GPU sensor support

2017-09-05T14:29:35+00:00

getGpuSensors() and updateGpuSensorStatus() Depends-on: I8a0de390516fd02df07860b960db506899b13f14 Change-Id: I290876d0e5f4889e6f2b1a45b5f81172acb28caf RTC:178218 Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/45196 Reviewed-by: Martin Gloff Reviewed-by: Christian R. Geddes Tested-by: Jenkins Server Tested-by: Jenkins OP Build CI Tested-by: FSP CI Jenkins Reviewed-by: Daniel M. Crowell