# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/fragment.am subdir = src ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/../config/enable.m4 \ $(top_srcdir)/../config/iconv.m4 \ $(top_srcdir)/../config/lead-dot.m4 \ $(top_srcdir)/../config/lib-ld.m4 \ $(top_srcdir)/../config/lib-link.m4 \ $(top_srcdir)/../config/lib-prefix.m4 \ $(top_srcdir)/../config/multi.m4 \ $(top_srcdir)/../config/no-executables.m4 \ $(top_srcdir)/../config/unwind_ipinfo.m4 \ $(top_srcdir)/../libtool.m4 $(top_srcdir)/crossconfig.m4 \ $(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/../config/tls.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(toolexeclibdir)" toolexeclibLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(toolexeclib_LTLIBRARIES) am__libstdc___la_SOURCES_DIST = bitmap_allocator.cc pool_allocator.cc \ mt_allocator.cc codecvt.cc compatibility.cc complex_io.cc \ ctype.cc debug.cc debug_list.cc functexcept.cc globals_io.cc \ ios.cc ios_failure.cc ios_init.cc ios_locale.cc limits.cc \ list.cc locale.cc locale_init.cc locale_facets.cc \ localename.cc stdexcept.cc strstream.cc tree.cc \ allocator-inst.cc concept-inst.cc fstream-inst.cc ext-inst.cc \ ios-inst.cc iostream-inst.cc istream-inst.cc istream.cc \ locale-inst.cc misc-inst.cc ostream-inst.cc sstream-inst.cc \ streambuf-inst.cc streambuf.cc string-inst.cc valarray-inst.cc \ wlocale-inst.cc wstring-inst.cc atomicity.cc \ codecvt_members.cc collate_members.cc ctype_members.cc \ messages_members.cc monetary_members.cc numeric_members.cc \ time_members.cc basic_file.cc c++locale.cc \ compatibility-ldbl.cc am__objects_1 = atomicity.lo codecvt_members.lo collate_members.lo \ ctype_members.lo messages_members.lo monetary_members.lo \ numeric_members.lo time_members.lo am__objects_2 = basic_file.lo c++locale.lo @GLIBCXX_LDBL_COMPAT_TRUE@am__objects_3 = compatibility-ldbl.lo am__objects_4 = bitmap_allocator.lo pool_allocator.lo mt_allocator.lo \ codecvt.lo compatibility.lo complex_io.lo ctype.lo debug.lo \ debug_list.lo functexcept.lo globals_io.lo ios.lo \ ios_failure.lo ios_init.lo ios_locale.lo limits.lo list.lo \ locale.lo locale_init.lo locale_facets.lo localename.lo \ stdexcept.lo strstream.lo tree.lo allocator-inst.lo \ concept-inst.lo fstream-inst.lo ext-inst.lo ios-inst.lo \ iostream-inst.lo istream-inst.lo istream.lo locale-inst.lo \ misc-inst.lo ostream-inst.lo sstream-inst.lo streambuf-inst.lo \ streambuf.lo string-inst.lo valarray-inst.lo wlocale-inst.lo \ wstring-inst.lo $(am__objects_1) $(am__objects_2) \ $(am__objects_3) am_libstdc___la_OBJECTS = $(am__objects_4) libstdc___la_OBJECTS = $(am_libstdc___la_OBJECTS) DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) depcomp = am__depfiles_maybe = CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) SOURCES = $(libstdc___la_SOURCES) DIST_SOURCES = $(am__libstdc___la_SOURCES_DIST) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) VPATH = $(top_srcdir)/src:$(top_srcdir) ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@ ACLOCAL = @ACLOCAL@ ALLOCATOR_H = @ALLOCATOR_H@ ALLOCATOR_NAME = @ALLOCATOR_NAME@ AMTAR = @AMTAR@ AR = @AR@ AS = @AS@ ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@ ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BASIC_FILE_CC = @BASIC_FILE_CC@ BASIC_FILE_H = @BASIC_FILE_H@ CC = @CC@ CCODECVT_CC = @CCODECVT_CC@ CCOLLATE_CC = @CCOLLATE_CC@ CCTYPE_CC = @CCTYPE_CC@ CFLAGS = @CFLAGS@ CLOCALE_CC = @CLOCALE_CC@ CLOCALE_H = @CLOCALE_H@ CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@ CMESSAGES_CC = @CMESSAGES_CC@ CMESSAGES_H = @CMESSAGES_H@ CMONEY_CC = @CMONEY_CC@ CNUMERIC_CC = @CNUMERIC_CC@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPU_DEFINES_SRCDIR = @CPU_DEFINES_SRCDIR@ CSTDIO_H = @CSTDIO_H@ CTIME_CC = @CTIME_CC@ CTIME_H = @CTIME_H@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ C_INCLUDE_DIR = @C_INCLUDE_DIR@ DEBUG_FLAGS = @DEBUG_FLAGS@ DEFS = @DEFS@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_SYMVERS_DARWIN_FALSE = @ENABLE_SYMVERS_DARWIN_FALSE@ ENABLE_SYMVERS_DARWIN_TRUE = @ENABLE_SYMVERS_DARWIN_TRUE@ ENABLE_SYMVERS_FALSE = @ENABLE_SYMVERS_FALSE@ ENABLE_SYMVERS_GNU_FALSE = @ENABLE_SYMVERS_GNU_FALSE@ ENABLE_SYMVERS_GNU_NAMESPACE_FALSE = @ENABLE_SYMVERS_GNU_NAMESPACE_FALSE@ ENABLE_SYMVERS_GNU_NAMESPACE_TRUE = @ENABLE_SYMVERS_GNU_NAMESPACE_TRUE@ ENABLE_SYMVERS_GNU_TRUE = @ENABLE_SYMVERS_GNU_TRUE@ ENABLE_SYMVERS_TRUE = @ENABLE_SYMVERS_TRUE@ ENABLE_VISIBILITY_FALSE = @ENABLE_VISIBILITY_FALSE@ ENABLE_VISIBILITY_TRUE = @ENABLE_VISIBILITY_TRUE@ EXEEXT = @EXEEXT@ EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@ GLIBCXX_BUILD_DEBUG_FALSE = @GLIBCXX_BUILD_DEBUG_FALSE@ GLIBCXX_BUILD_DEBUG_TRUE = @GLIBCXX_BUILD_DEBUG_TRUE@ GLIBCXX_BUILD_PCH_FALSE = @GLIBCXX_BUILD_PCH_FALSE@ GLIBCXX_BUILD_PCH_TRUE = @GLIBCXX_BUILD_PCH_TRUE@ GLIBCXX_C_HEADERS_COMPATIBILITY_FALSE = @GLIBCXX_C_HEADERS_COMPATIBILITY_FALSE@ GLIBCXX_C_HEADERS_COMPATIBILITY_TRUE = @GLIBCXX_C_HEADERS_COMPATIBILITY_TRUE@ GLIBCXX_C_HEADERS_C_FALSE = @GLIBCXX_C_HEADERS_C_FALSE@ GLIBCXX_C_HEADERS_C_STD_FALSE = @GLIBCXX_C_HEADERS_C_STD_FALSE@ GLIBCXX_C_HEADERS_C_STD_TRUE = @GLIBCXX_C_HEADERS_C_STD_TRUE@ GLIBCXX_C_HEADERS_C_TRUE = @GLIBCXX_C_HEADERS_C_TRUE@ GLIBCXX_HOSTED_FALSE = @GLIBCXX_HOSTED_FALSE@ GLIBCXX_HOSTED_TRUE = @GLIBCXX_HOSTED_TRUE@ GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@ GLIBCXX_LDBL_COMPAT_FALSE = @GLIBCXX_LDBL_COMPAT_FALSE@ GLIBCXX_LDBL_COMPAT_TRUE = @GLIBCXX_LDBL_COMPAT_TRUE@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LIBICONV = @LIBICONV@ LIBMATHOBJS = @LIBMATHOBJS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBSUPCXX_PICFLAGS = @LIBSUPCXX_PICFLAGS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ MAKEINFO = @MAKEINFO@ OBJEXT = @OBJEXT@ OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@ OPT_LDFLAGS = @OPT_LDFLAGS@ OS_INC_SRCDIR = @OS_INC_SRCDIR@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ SECTION_FLAGS = @SECTION_FLAGS@ SECTION_LDFLAGS = @SECTION_LDFLAGS@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SYMVER_FILE = @SYMVER_FILE@ TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ WARN_FLAGS = @WARN_FLAGS@ WERROR = @WERROR@ ac_ct_AR = @ac_ct_AR@ ac_ct_AS = @ac_ct_AS@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__leading_dot = @am__leading_dot@ am__tar = @am__tar@ am__untar = @am__untar@ baseline_dir = @baseline_dir@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ check_msgfmt = @check_msgfmt@ datadir = @datadir@ enable_shared = @enable_shared@ enable_static = @enable_static@ exec_prefix = @exec_prefix@ glibcxx_MOFILES = @glibcxx_MOFILES@ glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@ glibcxx_POFILES = @glibcxx_POFILES@ glibcxx_builddir = @glibcxx_builddir@ glibcxx_localedir = @glibcxx_localedir@ glibcxx_prefixdir = @glibcxx_prefixdir@ glibcxx_srcdir = @glibcxx_srcdir@ glibcxx_thread_h = @glibcxx_thread_h@ glibcxx_toolexecdir = @glibcxx_toolexecdir@ glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@ gxx_include_dir = @gxx_include_dir@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ libtool_VERSION = @libtool_VERSION@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ multi_basedir = @multi_basedir@ oldincludedir = @oldincludedir@ port_specific_symbol_files = @port_specific_symbol_files@ prefix = @prefix@ program_transform_name = @program_transform_name@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target = @target@ target_alias = @target_alias@ target_cpu = @target_cpu@ target_os = @target_os@ target_vendor = @target_vendor@ toplevel_srcdir = @toplevel_srcdir@ # May be used by various substitution variables. gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER) MAINT_CHARSET = latin1 mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs PWD_COMMAND = $${PWDCMD-pwd} STAMP = echo timestamp > toolexecdir = $(glibcxx_toolexecdir) toolexeclibdir = $(glibcxx_toolexeclibdir) # These bits are all figured out from configure. Look in acinclude.m4 # or configure.ac to see how they are set. See GLIBCXX_EXPORT_FLAGS. CONFIG_CXXFLAGS = \ $(SECTION_FLAGS) $(EXTRA_CXX_FLAGS) WARN_CXXFLAGS = \ $(WARN_FLAGS) $(WERROR) -fdiagnostics-show-location=once # -I/-D flags to pass when compiling. AM_CPPFLAGS = $(GLIBCXX_INCLUDES) # Cross compiler support. toolexeclib_LTLIBRARIES = libstdc++.la @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,-exported_symbols_list,libstdc++-symbols.explist @ENABLE_SYMVERS_FALSE@version_arg = @ENABLE_SYMVERS_GNU_NAMESPACE_TRUE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,--version-script=libstdc++-symbols.ver @ENABLE_SYMVERS_GNU_TRUE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,--version-script=libstdc++-symbols.ver @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.explist @ENABLE_SYMVERS_FALSE@version_dep = @ENABLE_SYMVERS_GNU_NAMESPACE_TRUE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.ver @ENABLE_SYMVERS_GNU_TRUE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.ver # Source files linked in via configuration/make substitution for a # particular host. host_sources = \ atomicity.cc \ codecvt_members.cc \ collate_members.cc \ ctype_members.cc \ messages_members.cc \ monetary_members.cc \ numeric_members.cc \ time_members.cc atomicity_file = ${glibcxx_srcdir}/$(ATOMICITY_SRCDIR)/atomicity.h # Source files linked in via configuration/make substitution for a # particular host, but with ad hoc naming rules. host_sources_extra = \ basic_file.cc \ c++locale.cc @GLIBCXX_LDBL_COMPAT_FALSE@ldbl_compat_sources = @GLIBCXX_LDBL_COMPAT_TRUE@ldbl_compat_sources = compatibility-ldbl.cc # Sources present in the src directory. sources = \ bitmap_allocator.cc \ pool_allocator.cc \ mt_allocator.cc \ codecvt.cc \ compatibility.cc \ complex_io.cc \ ctype.cc \ debug.cc \ debug_list.cc \ functexcept.cc \ globals_io.cc \ ios.cc \ ios_failure.cc \ ios_init.cc \ ios_locale.cc \ limits.cc \ list.cc \ locale.cc \ locale_init.cc \ locale_facets.cc \ localename.cc \ stdexcept.cc \ strstream.cc \ tree.cc \ allocator-inst.cc \ concept-inst.cc \ fstream-inst.cc \ ext-inst.cc \ ios-inst.cc \ iostream-inst.cc \ istream-inst.cc \ istream.cc \ locale-inst.cc \ misc-inst.cc \ ostream-inst.cc \ sstream-inst.cc \ streambuf-inst.cc \ streambuf.cc \ string-inst.cc \ valarray-inst.cc \ wlocale-inst.cc \ wstring-inst.cc \ ${host_sources} \ ${host_sources_extra} \ ${ldbl_compat_sources} libstdc___la_SOURCES = $(sources) libstdc___la_LIBADD = \ $(top_builddir)/libmath/libmath.la \ $(top_builddir)/libsupc++/libsupc++convenience.la libstdc___la_DEPENDENCIES = ${version_dep} $(libstdc___la_LIBADD) libstdc___la_LDFLAGS = \ -version-info $(libtool_VERSION) ${version_arg} -lm # Use special rules for the deprecated source files so that they find # deprecated include files. GLIBCXX_INCLUDE_DIR = $(glibcxx_builddir)/include # AM_CXXFLAGS needs to be in each subdirectory so that it can be # modified in a per-library or per-sub-library way. Need to manually # set this option because CONFIG_CXXFLAGS has to be after # OPTIMIZE_CXXFLAGS on the compile line so that -O2 can be overridden # as the occasion calls for it. AM_CXXFLAGS = \ -fno-implicit-templates \ $(WARN_CXXFLAGS) \ $(OPTIMIZE_CXXFLAGS) \ $(CONFIG_CXXFLAGS) # libstdc++ libtool notes # 1) Need to explicitly set LTCXXCOMPILE so that AM_CXXFLAGS is # last. (That way, things like -O2 passed down from the toplevel can # be overridden by --enable-debug.) # 2) In general, libtool expects an argument such as `--tag=CXX' when # using the C++ compiler, because that will enable the settings # detected when C++ support was being configured. However, when no # such flag is given in the command line, libtool attempts to figure # it out by matching the compiler name in each configuration section # against a prefix of the command line. The problem is that, if the # compiler name and its initial flags stored in the libtool # configuration file don't match those in the command line, libtool # can't decide which configuration to use, and it gives up. The # correct solution is to add `--tag CXX' to LTCXXCOMPILE and maybe # CXXLINK, just after $(LIBTOOL), so that libtool doesn't have to # attempt to infer which configuration to use LTCXXCOMPILE = $(LIBTOOL) --tag CXX --mode=compile $(CXX) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTLDFLAGS = $(shell $(SHELL) $(top_srcdir)/../libtool-ldflags $(LDFLAGS)) # 3) We'd have a problem when building the shared libstdc++ object if # the rules automake generates would be used. We cannot allow g++ to # be used since this would add -lstdc++ to the link line which of # course is problematic at this point. So, we get the top-level # directory to configure libstdc++-v3 to use gcc as the C++ # compilation driver. CXXLINK = $(LIBTOOL) --tag CXX --mode=link $(CXX) \ $(OPT_LDFLAGS) $(SECTION_LDFLAGS) $(AM_CXXFLAGS) $(LTLDFLAGS) -o $@ debugdir = debug all: all-am .SUFFIXES: .SUFFIXES: .cc .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps src/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign --ignore-deps src/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(toolexeclibdir)" || $(mkdir_p) "$(DESTDIR)$(toolexeclibdir)" @list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ f=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=install $(toolexeclibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(toolexeclibdir)/$$f'"; \ $(LIBTOOL) --mode=install $(toolexeclibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(toolexeclibdir)/$$f"; \ else :; fi; \ done uninstall-toolexeclibLTLIBRARIES: @$(NORMAL_UNINSTALL) @set -x; list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \ p=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(toolexeclibdir)/$$p'"; \ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(toolexeclibdir)/$$p"; \ done clean-toolexeclibLTLIBRARIES: -test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES) @list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libstdc++.la: $(libstdc___la_OBJECTS) $(libstdc___la_DEPENDENCIES) $(CXXLINK) -rpath $(toolexeclibdir) $(libstdc___la_LDFLAGS) $(libstdc___la_OBJECTS) $(libstdc___la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c .cc.o: $(CXXCOMPILE) -c -o $@ $< .cc.obj: $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cc.lo: $(LTCXXCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(mkdir_p) $(distdir)/.. @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) all-local installdirs: for dir in "$(DESTDIR)$(toolexeclibdir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-toolexeclibLTLIBRARIES \ mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-libtool distclean-tags dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-data-local install-exec-am: install-toolexeclibLTLIBRARIES install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-info-am uninstall-toolexeclibLTLIBRARIES .PHONY: CTAGS GTAGS all all-am all-local check check-am clean \ clean-generic clean-libtool clean-toolexeclibLTLIBRARIES ctags \ distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-data-local install-exec \ install-exec-am install-info install-info-am install-man \ install-strip install-toolexeclibLTLIBRARIES installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags uninstall uninstall-am uninstall-info-am \ uninstall-toolexeclibLTLIBRARIES # Symbol versioning for shared libraries. @ENABLE_SYMVERS_TRUE@libstdc++-symbols.ver: ${glibcxx_srcdir}/$(SYMVER_FILE) \ @ENABLE_SYMVERS_TRUE@ $(port_specific_symbol_files) @ENABLE_SYMVERS_TRUE@ cp ${glibcxx_srcdir}/$(SYMVER_FILE) ./libstdc++-symbols.ver @ENABLE_SYMVERS_TRUE@ if test "x$(port_specific_symbol_files)" != x; then \ @ENABLE_SYMVERS_TRUE@ if grep '^# Appended to version file.' \ @ENABLE_SYMVERS_TRUE@ $(port_specific_symbol_files) /dev/null > /dev/null 2>&1; then \ @ENABLE_SYMVERS_TRUE@ cat $(port_specific_symbol_files) >> $@; \ @ENABLE_SYMVERS_TRUE@ else \ @ENABLE_SYMVERS_TRUE@ sed -n '1,/DO NOT DELETE/p' $@ > tmp.top; \ @ENABLE_SYMVERS_TRUE@ sed -n '/DO NOT DELETE/,$$p' $@ > tmp.bottom; \ @ENABLE_SYMVERS_TRUE@ cat tmp.top $(port_specific_symbol_files) tmp.bottom > $@; \ @ENABLE_SYMVERS_TRUE@ rm tmp.top tmp.bottom; \ @ENABLE_SYMVERS_TRUE@ fi; \ @ENABLE_SYMVERS_TRUE@ fi @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@libstdc++-symbols.explist : libstdc++-symbols.ver \ @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ ${glibcxx_srcdir}/scripts/make_exports.pl \ @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ $(libstdc___la_OBJECTS) $(libstdc___la_LIBADD) @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ perl ${glibcxx_srcdir}/scripts/make_exports.pl \ @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ libstdc++-symbols.ver \ @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ $(libstdc___la_OBJECTS:%.lo=.libs/%.o) \ @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ `echo $(libstdc___la_LIBADD) | \ @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ sed 's,/\([^/.]*\)\.la,/.libs/\1.a,g'` \ @ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@ > $@ || (rm -f $@ ; exit 1) codecvt_members.cc: ${glibcxx_srcdir}/$(CCODECVT_CC) $(LN_S) ${glibcxx_srcdir}/$(CCODECVT_CC) . || true collate_members.cc: ${glibcxx_srcdir}/$(CCOLLATE_CC) $(LN_S) ${glibcxx_srcdir}/$(CCOLLATE_CC) . || true ctype_members.cc: ${glibcxx_srcdir}/$(CCTYPE_CC) $(LN_S) ${glibcxx_srcdir}/$(CCTYPE_CC) . || true messages_members.cc: ${glibcxx_srcdir}/$(CMESSAGES_CC) $(LN_S) ${glibcxx_srcdir}/$(CMESSAGES_CC) . || true monetary_members.cc: ${glibcxx_srcdir}/$(CMONEY_CC) $(LN_S) ${glibcxx_srcdir}/$(CMONEY_CC) . || true numeric_members.cc: ${glibcxx_srcdir}/$(CNUMERIC_CC) $(LN_S) ${glibcxx_srcdir}/$(CNUMERIC_CC) . || true time_members.cc: ${glibcxx_srcdir}/$(CTIME_CC) $(LN_S) ${glibcxx_srcdir}/$(CTIME_CC) . || true atomicity.cc: ${atomicity_file} $(LN_S) ${atomicity_file} ./atomicity.cc || true c++locale.cc: ${glibcxx_srcdir}/$(CLOCALE_CC) $(LN_S) ${glibcxx_srcdir}/$(CLOCALE_CC) ./$@ || true basic_file.cc: ${glibcxx_srcdir}/$(BASIC_FILE_CC) $(LN_S) ${glibcxx_srcdir}/$(BASIC_FILE_CC) ./$@ || true strstream.lo: strstream.cc $(LTCXXCOMPILE) -I$(GLIBCXX_INCLUDE_DIR)/backward -Wno-deprecated -c $< strstream.o: strstream.cc $(CXXCOMPILE) -I$(GLIBCXX_INCLUDE_DIR)/backward -Wno-deprecated -c $< # Use special rules for the concept-checking instantiations so that all # the generated template functions are also instantiated. Force the checks # to be on so that the instantiations are actually seen. concept-inst.lo: concept-inst.cc $(LTCXXCOMPILE) -D_GLIBCXX_CONCEPT_CHECKS -fimplicit-templates -c $< concept-inst.o: concept-inst.cc $(CXXCOMPILE) -D_GLIBCXX_CONCEPT_CHECKS -fimplicit-templates -c $< # Use special rules for compatibility-ldbl.cc compilation, as we need to # pass -mlong-double-64. @GLIBCXX_LDBL_COMPAT_TRUE@compatibility-ldbl.lo: compatibility-ldbl.cc @GLIBCXX_LDBL_COMPAT_TRUE@ $(LTCXXCOMPILE) -mlong-double-64 -c $< @GLIBCXX_LDBL_COMPAT_TRUE@compatibility-ldbl.o: compatibility-ldbl.cc @GLIBCXX_LDBL_COMPAT_TRUE@ $(CXXCOMPILE) -mlong-double-64 -c $< # Added bits to build debug library. @GLIBCXX_BUILD_DEBUG_TRUE@all-local: build_debug @GLIBCXX_BUILD_DEBUG_TRUE@install-data-local: install_debug @GLIBCXX_BUILD_DEBUG_FALSE@all-local: @GLIBCXX_BUILD_DEBUG_FALSE@install-data-local: # Build parallel set of debug objects here. stamp-debug: if test ! -d ${debugdir}; then \ mkdir -p ${debugdir}; \ (cd ${debugdir}; \ sed -e 's/top_builddir = \.\./top_builddir = ..\/../' \ -e 's/srcdir = \.\./srcdir = ..\/../' \ -e 's/glibcxx_basedir = \.\./glibcxx_basedir = ..\/../' \ -e 's/all-local: build_debug/all-local:/' \ -e 's/install-data-local: install_debug/install-data-local:/' \ < ../Makefile > Makefile) ; \ fi; \ echo `date` > stamp-debug; build_debug: stamp-debug (cd ${debugdir} && $(MAKE) CXXFLAGS='$(DEBUG_FLAGS)' all) # Install debug library here. install_debug: (cd ${debugdir} && $(MAKE) \ toolexeclibdir=$(glibcxx_toolexeclibdir)/debug install) # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: