# configure.in for GNU CC # Process this file with autoconf to generate a configuration script. # Copyright (C) 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. #This file is part of GNU CC. #GNU CC is free software; you can redistribute it and/or modify #it under the terms of the GNU General Public License as published by #the Free Software Foundation; either version 2, or (at your option) #any later version. #GNU CC is distributed in the hope that it will be useful, #but WITHOUT ANY WARRANTY; without even the implied warranty of #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #GNU General Public License for more details. #You should have received a copy of the GNU General Public License #along with GNU CC; see the file COPYING. If not, write to #the Free Software Foundation, 59 Temple Place - Suite 330, #Boston, MA 02111-1307, USA. # Initialization and defaults AC_PREREQ(2.13) AC_INIT(tree.c) AC_CONFIG_HEADER(auto-host.h:config.in) remove=rm hard_link=ln symbolic_link='ln -s' copy=cp # Check for bogus environment variables. # Test if LIBRARY_PATH contains the notation for the current directory # since this would lead to problems installing/building glibc. # LIBRARY_PATH contains the current directory if one of the following # is true: # - one of the terminals (":" and ";") is the first or last sign # - two terminals occur directly after each other # - the path contains an element with a dot in it AC_MSG_CHECKING(LIBRARY_PATH variable) changequote(,)dnl case ${LIBRARY_PATH} in [:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* ) library_path_setting="contains current directory" ;; *) library_path_setting="ok" ;; esac changequote([,])dnl AC_MSG_RESULT($library_path_setting) if test "$library_path_setting" != "ok"; then AC_MSG_ERROR([ *** LIBRARY_PATH shouldn't contain the current directory when *** building gcc. Please change the environment variable *** and run configure again.]) fi # Test if GCC_EXEC_PREFIX contains the notation for the current directory # since this would lead to problems installing/building glibc. # GCC_EXEC_PREFIX contains the current directory if one of the following # is true: # - one of the terminals (":" and ";") is the first or last sign # - two terminals occur directly after each other # - the path contains an element with a dot in it AC_MSG_CHECKING(GCC_EXEC_PREFIX variable) changequote(,)dnl case ${GCC_EXEC_PREFIX} in [:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* ) gcc_exec_prefix_setting="contains current directory" ;; *) gcc_exec_prefix_setting="ok" ;; esac changequote([,])dnl AC_MSG_RESULT($gcc_exec_prefix_setting) if test "$gcc_exec_prefix_setting" != "ok"; then AC_MSG_ERROR([ *** GCC_EXEC_PREFIX shouldn't contain the current directory when *** building gcc. Please change the environment variable *** and run configure again.]) fi # Check for additional parameters # With GNU ld AC_ARG_WITH(gnu-ld, [ --with-gnu-ld arrange to work with GNU ld.], gnu_ld_flag="$with_gnu_ld", gnu_ld_flag=no) # With pre-defined ld AC_ARG_WITH(ld, [ --with-ld arrange to use the specified ld (full pathname).], DEFAULT_LINKER="$with_ld") if test x"${DEFAULT_LINKER+set}" = x"set"; then if test ! -x "$DEFAULT_LINKER"; then AC_MSG_WARN([cannot execute: $DEFAULT_LINKER: check --with-ld or env. var. DEFAULT_LINKER]) elif $DEFAULT_LINKER -v < /dev/null 2>&1 | grep GNU > /dev/null; then gnu_ld_flag=yes fi AC_DEFINE_UNQUOTED(DEFAULT_LINKER,"$DEFAULT_LINKER", [Define to enable the use of a default linker.]) fi # With GNU as AC_ARG_WITH(gnu-as, [ --with-gnu-as arrange to work with GNU as.], gas_flag="$with_gnu_as", gas_flag=no) AC_ARG_WITH(as, [ --with-as arrange to use the specified as (full pathname).], DEFAULT_ASSEMBLER="$with_as") if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then if test ! -x "$DEFAULT_ASSEMBLER"; then AC_MSG_WARN([cannot execute: $DEFAULT_ASSEMBLER: check --with-as or env. var. DEFAULT_ASSEMBLER]) elif $DEFAULT_ASSEMBLER -v < /dev/null 2>&1 | grep GNU > /dev/null; then gas_flag=yes fi AC_DEFINE_UNQUOTED(DEFAULT_ASSEMBLER,"$DEFAULT_ASSEMBLER", [Define to enable the use of a default assembler.]) fi # With stabs AC_ARG_WITH(stabs, [ --with-stabs arrange to use stabs instead of host debug format.], stabs="$with_stabs", stabs=no) # With ELF AC_ARG_WITH(elf, [ --with-elf arrange to use ELF instead of host debug format.], elf="$with_elf", elf=no) # Specify the local prefix local_prefix= AC_ARG_WITH(local-prefix, [ --with-local-prefix=DIR specifies directory to put local include.], [case "${withval}" in yes) AC_MSG_ERROR(bad value ${withval} given for local include directory prefix) ;; no) ;; *) local_prefix=$with_local_prefix ;; esac]) # Default local prefix if it is empty if test x$local_prefix = x; then local_prefix=/usr/local fi # Don't set gcc_gxx_include_dir to gxx_include_dir since that's only # passed in by the toplevel make and thus we'd get different behavior # depending on where we built the sources. gcc_gxx_include_dir= # Specify the g++ header file directory AC_ARG_WITH(gxx-include-dir, [ --with-gxx-include-dir=DIR specifies directory to put g++ header files.], [case "${withval}" in yes) AC_MSG_ERROR(bad value ${withval} given for g++ include directory) ;; no) ;; *) gcc_gxx_include_dir=$with_gxx_include_dir ;; esac]) if test x${gcc_gxx_include_dir} = x; then if test x${enable_version_specific_runtime_libs} = xyes; then gcc_gxx_include_dir='${libsubdir}/include/g++' else topsrcdir=${srcdir}/.. . ${srcdir}/../config.if changequote(<<, >>)dnl gcc_gxx_include_dir="\$(libsubdir)/\$(unlibsubdir)/..\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/[^/]*|/..|g'\`/include/"${libstdcxx_incdir} changequote([, ])dnl fi fi # Determine whether or not multilibs are enabled. AC_ARG_ENABLE(multilib, [ --enable-multilib enable library support for multiple ABIs], [], [enable_multilib=yes]) AC_SUBST(enable_multilib) # Enable expensive internal checks AC_ARG_ENABLE(checking, [ --enable-checking[=LIST] enable expensive run-time checks. With LIST, enable only specific categories of checks. Categories are: misc,tree,rtl,gc,gcac; default is misc,tree,gc], [ac_checking= ac_tree_checking= ac_rtl_checking= ac_gc_checking= ac_gc_always_collect= case "${enableval}" in yes) ac_checking=1 ; ac_tree_checking=1 ; ac_gc_checking=1 ;; no) ;; *) IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="$IFS," set fnord $enableval; shift IFS="$ac_save_IFS" for check do case $check in misc) ac_checking=1 ;; tree) ac_tree_checking=1 ;; rtl) ac_rtl_checking=1 ;; gc) ac_gc_checking=1 ;; gcac) ac_gc_always_collect=1 ;; *) AC_MSG_ERROR(unknown check category $check) ;; esac done ;; esac ], # Enable some checks by default for development versions of GCC [ac_checking=1; ac_tree_checking=1; ac_gc_checking=1;]) if test x$ac_checking != x ; then AC_DEFINE(ENABLE_CHECKING, 1, [Define if you want more run-time sanity checks. This one gets a grab bag of miscellaneous but relatively cheap checks.]) fi if test x$ac_tree_checking != x ; then AC_DEFINE(ENABLE_TREE_CHECKING, 1, [Define if you want all operations on trees (the basic data structure of the front ends) to be checked for dynamic type safety at runtime. This is moderately expensive.]) fi if test x$ac_rtl_checking != x ; then AC_DEFINE(ENABLE_RTL_CHECKING, 1, [Define if you want all operations on RTL (the basic data structure of the optimizer and back end) to be checked for dynamic type safety at runtime. This is quite expensive.]) fi if test x$ac_gc_checking != x ; then AC_DEFINE(ENABLE_GC_CHECKING, 1, [Define if you want the garbage collector to do object poisoning and other memory allocation checks. This is quite expensive.]) fi if test x$ac_gc_always_collect != x ; then AC_DEFINE(ENABLE_GC_ALWAYS_COLLECT, 1, [Define if you want the garbage collector to operate in maximally paranoid mode, validating the entire heap and collecting garbage at every opportunity. This is extremely expensive.]) fi AC_ARG_ENABLE(cpp, [ --disable-cpp don't provide a user-visible C preprocessor.], [], [enable_cpp=yes]) AC_ARG_WITH(cpp_install_dir, [ --with-cpp-install-dir=DIR install the user visible C preprocessor in DIR (relative to PREFIX) as well as PREFIX/bin.], [if test x$withval = xyes; then AC_MSG_ERROR([option --with-cpp-install-dir requires an argument]) elif test x$withval != xno; then cpp_install_dir=$withval fi]) # Enable Multibyte Characters for C/C++ AC_ARG_ENABLE(c-mbchar, [ --enable-c-mbchar Enable multibyte characters for C and C++.], if test x$enable_c_mbchar != xno; then AC_DEFINE(MULTIBYTE_CHARS, 1, [Define if you want the C and C++ compilers to support multibyte character sets for source code.]) fi) # Enable threads # Pass with no value to take the default # Pass with a value to specify a thread package AC_ARG_ENABLE(threads, [ --enable-threads enable thread usage for target GCC. --enable-threads=LIB use LIB thread package for target GCC.],, enable_threads='') enable_threads_flag=$enable_threads # Check if a valid thread package case x${enable_threads_flag} in x | xno) # No threads target_thread_file='single' ;; xyes) # default target_thread_file='' ;; xdecosf1 | xirix | xmach | xos2 | xposix | xpthreads | xsingle | \ xsolaris | xwin32 | xdce | xvxworks | xaix) target_thread_file=$enable_threads_flag ;; *) echo "$enable_threads is an unknown thread package" 1>&2 exit 1 ;; esac AC_ARG_ENABLE(objc-gc, [ --enable-objc-gc enable the use of Boehm's garbage collector with the GNU Objective-C runtime.], if test x$enable_objc_gc = xno; then objc_boehm_gc='' else objc_boehm_gc=1 fi, objc_boehm_gc='') AC_ARG_WITH(dwarf2, [ --with-dwarf2 force the default debug format to be DWARF2.], dwarf2="$with_dwarf2", dwarf2=no) AC_ARG_ENABLE(shared, [ --disable-shared don't provide a shared libgcc.], [], [enable_shared=yes]) AC_SUBST(enable_shared) # Determine the host, build, and target systems AC_CANONICAL_SYSTEM # Find the native compiler AC_PROG_CC AC_PROG_CC_C_O # autoconf is lame and doesn't give us any substitution variable for this. if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then NO_MINUS_C_MINUS_O=yes else OUTPUT_OPTION='-o $@' fi AC_SUBST(NO_MINUS_C_MINUS_O) AC_SUBST(OUTPUT_OPTION) gcc_AC_C_LONG_DOUBLE AC_CACHE_CHECK(whether ${CC-cc} accepts -Wno-long-long, ac_cv_prog_cc_no_long_long, [save_CFLAGS="$CFLAGS" CFLAGS="-Wno-long-long" AC_TRY_COMPILE(,,ac_cv_prog_cc_no_long_long=yes, ac_cv_prog_cc_no_long_long=no) CFLAGS="$save_CFLAGS"]) strict1_warn= if test $ac_cv_prog_cc_no_long_long = yes; then strict1_warn="-pedantic -Wno-long-long" fi AC_SUBST(strict1_warn) # If the native compiler is GCC, we can enable warnings even in stage1. # That's useful for people building cross-compilers, or just running a # quick `make'. warn_cflags= if test "x$GCC" = "xyes"; then warn_cflags='$(GCC_WARN_CFLAGS)' fi AC_SUBST(warn_cflags) # Stage specific cflags for build. stage1_cflags= case $build in vax-*-*) if test x$GCC = xyes then stage1_cflags="-Wa,-J" else stage1_cflags="-J" fi ;; esac AC_SUBST(stage1_cflags) AC_PROG_MAKE_SET AC_MSG_CHECKING([whether a default assembler was specified]) if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then if test x"$gas_flag" = x"no"; then AC_MSG_RESULT([yes ($DEFAULT_ASSEMBLER)]) else AC_MSG_RESULT([yes ($DEFAULT_ASSEMBLER - GNU as)]) fi else AC_MSG_RESULT(no) fi AC_MSG_CHECKING([whether a default linker was specified]) if test x"${DEFAULT_LINKER+set}" = x"set"; then if test x"$gnu_ld_flag" = x"no"; then AC_MSG_RESULT([yes ($DEFAULT_LINKER)]) else AC_MSG_RESULT([yes ($DEFAULT_LINKER - GNU ld)]) fi else AC_MSG_RESULT(no) fi AC_MSG_CHECKING(for GNU C library) AC_CACHE_VAL(gcc_cv_glibc, [AC_TRY_COMPILE( [#include ],[ #if ! (defined __GLIBC__ || defined __GNU_LIBRARY__) #error Not a GNU C library system #endif], [gcc_cv_glibc=yes], gcc_cv_glibc=no)]) AC_MSG_RESULT($gcc_cv_glibc) if test $gcc_cv_glibc = yes; then AC_DEFINE(_GNU_SOURCE, 1, [Always define this when using the GNU C Library]) fi AC_C_INLINE # Find some useful tools AC_PROG_AWK gcc_AC_PROG_LN gcc_AC_PROG_LN_S gcc_AC_C_VOLATILE AC_PROG_RANLIB gcc_AC_PROG_INSTALL AC_HEADER_STDC AC_HEADER_TIME gcc_AC_HEADER_STRING AC_HEADER_SYS_WAIT AC_CHECK_HEADERS(limits.h stddef.h string.h strings.h stdlib.h time.h \ fcntl.h unistd.h stab.h sys/file.h sys/time.h \ sys/resource.h sys/param.h sys/times.h sys/stat.h \ direct.h malloc.h langinfo.h iconv.h) # Check for thread headers. AC_CHECK_HEADER(thread.h, [have_thread_h=yes], [have_thread_h=]) AC_CHECK_HEADER(pthread.h, [have_pthread_h=yes], [have_pthread_h=]) # See if GNAT has been installed AC_CHECK_PROG(have_gnat, gnatbind, yes, no) # See if we have the mktemp command. AC_CHECK_PROG(have_mktemp_command, mktemp, yes, no) # Do we have a single-tree copy of texinfo? if test -f $srcdir/../texinfo/Makefile.in; then MAKEINFO='$(objdir)/../texinfo/makeinfo/makeinfo' gcc_cv_prog_makeinfo_modern=yes AC_MSG_RESULT([Using makeinfo from the unified source tree.]) else # See if makeinfo has been installed and is modern enough # that we can use it. gcc_AC_CHECK_PROG_VER(MAKEINFO, makeinfo, --version, [GNU texinfo.* \([0-9][0-9.]*\)], [4.*]) fi if test $gcc_cv_prog_makeinfo_modern = no; then AC_MSG_WARN([ *** Makeinfo is missing or too old. *** Info documentation will not be built.]) BUILD_INFO= else BUILD_INFO=info AC_SUBST(BUILD_INFO) fi # Is pod2man recent enough to regenerate manpages? AC_MSG_CHECKING([for recent Pod::Man]) if perl -e 'use 1.10 Pod::Man' >/dev/null 2>&1; then AC_MSG_RESULT(yes) GENERATED_MANPAGES=generated-manpages AC_SUBST(GENERATED_MANPAGES) else AC_MSG_RESULT(no) GENERATED_MANPAGES= fi # How about lex? dnl Don't use AC_PROG_LEX; we insist on flex. dnl LEXLIB is not useful in gcc. if test -f $srcdir/../flex/skel.c; then FLEX='$(objdir)/../flex/flex' else AC_CHECK_PROG(FLEX, flex, flex, false) fi # Bison? # The -L switch is so bison can find its skeleton file. if test -f $srcdir/../bison/bison.simple; then BISON='$(objdir)/../bison/bison -L $(srcdir)/../bison/' else AC_CHECK_PROG(BISON, bison, bison, false) fi # See if the stage1 system preprocessor understands the ANSI C # preprocessor stringification operator. AC_C_STRINGIZE # Use only if it exists, # doesn't clash with , and declares intmax_t. AC_MSG_CHECKING(for inttypes.h) AC_CACHE_VAL(gcc_cv_header_inttypes_h, [AC_TRY_COMPILE( [#include #include ], [intmax_t i = -1;], [gcc_cv_header_inttypes_h=yes], gcc_cv_header_inttypes_h=no)]) AC_MSG_RESULT($gcc_cv_header_inttypes_h) if test $gcc_cv_header_inttypes_h = yes; then AC_DEFINE(HAVE_INTTYPES_H, 1, [Define if you have a working header file.]) fi # # Determine if enumerated bitfields are unsigned. ISO C says they can # be either signed or unsigned. # AC_CACHE_CHECK(for unsigned enumerated bitfields, gcc_cv_enum_bf_unsigned, [AC_TRY_RUN(#include enum t { BLAH = 128 } ; struct s_t { enum t member : 8; } s ; int main(void) { s.member = BLAH; if (s.member < 0) exit(1); exit(0); }, gcc_cv_enum_bf_unsigned=yes, gcc_cv_enum_bf_unsigned=no, gcc_cv_enum_bf_unsigned=yes)]) if test $gcc_cv_enum_bf_unsigned = yes; then AC_DEFINE(ENUM_BITFIELDS_ARE_UNSIGNED, 1, [Define if enumerated bitfields are treated as unsigned values.]) fi AC_CHECK_FUNCS(strtoul bsearch putenv popen bcopy \ strchr strrchr kill getrlimit setrlimit atoll atoq \ sysconf isascii gettimeofday strsignal putc_unlocked fputc_unlocked \ fputs_unlocked getrusage iconv nl_langinfo) AC_CHECK_TYPE(ssize_t, int) # Try to determine the array type of the second argument of getgroups # for the target system (int or gid_t). AC_TYPE_GETGROUPS if test "${target}" = "${build}"; then TARGET_GETGROUPS_T=$ac_cv_type_getgroups else case "${target}" in # This condition may need some tweaking. It should include all # targets where the array type of the second argument of getgroups # is int and the type of gid_t is not equivalent to int. *-*-sunos* | *-*-ultrix*) TARGET_GETGROUPS_T=int ;; *) TARGET_GETGROUPS_T=gid_t ;; esac fi AC_SUBST(TARGET_GETGROUPS_T) gcc_AC_FUNC_VFPRINTF_DOPRNT gcc_AC_FUNC_STRSTR gcc_AC_FUNC_PRINTF_PTR case "${host}" in *-*-uwin*) AC_MSG_ERROR([ *** UWIN may not be used as a host platform because *** linking with posix.dll is not allowed by the GNU GPL]) ;; esac AC_FUNC_VFORK AC_FUNC_MMAP_ANYWHERE AC_FUNC_MMAP_FILE # We will need to find libiberty.h and ansidecl.h saved_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -I${srcdir} -I${srcdir}/../include" gcc_AC_CHECK_DECLS(bcopy \ getenv atol sbrk abort atof getcwd getwd \ strsignal putc_unlocked fputs_unlocked strstr environ \ malloc realloc calloc free basename getopt, , ,[ #include "gansidecl.h" #include "system.h"]) gcc_AC_CHECK_DECLS(getrlimit setrlimit getrusage, , ,[ #include "gansidecl.h" #include "system.h" #ifdef HAVE_SYS_RESOURCE_H #include #endif ]) # Restore CFLAGS from before the gcc_AC_NEED_DECLARATIONS tests. CFLAGS="$saved_CFLAGS" # mkdir takes a single argument on some systems. gcc_AC_FUNC_MKDIR_TAKES_ONE_ARG # File extensions manext='.1' objext='.o' AC_SUBST(manext) AC_SUBST(objext) build_xm_file= build_xm_defines= build_install_headers_dir=install-headers-tar build_exeext= host_xm_file= host_xm_defines= host_xmake_file= host_truncate_target= host_exeext= # Decode the host machine, then the target machine. # For the host machine, we save the xm_file variable as host_xm_file; # then we decode the target machine and forget everything else # that came from the host machine. for machine in $build $host $target; do . ${srcdir}/config.gcc done extra_objs="${host_extra_objs} ${extra_objs}" # Default the target-machine variables that were not explicitly set. if test x"$tm_file" = x then tm_file=$cpu_type/$cpu_type.h; fi if test x"$extra_headers" = x then extra_headers=; fi if test x"$xm_file" = x then xm_file=$cpu_type/xm-$cpu_type.h; fi if test x$md_file = x then md_file=$cpu_type/$cpu_type.md; fi if test x$out_file = x then out_file=$cpu_type/$cpu_type.c; fi if test x"$tmake_file" = x then tmake_file=$cpu_type/t-$cpu_type fi if test x"$dwarf2" = xyes then tm_file="$tm_file tm-dwarf2.h" fi if test x$float_format = x then float_format=i64 fi if test $float_format = none then float_h_file=Makefile.in else float_h_file=float-$float_format.h fi # Handle cpp installation. if test x$enable_cpp != xno then tmake_file="$tmake_file t-install-cpp" fi # Say what files are being used for the output code and MD file. echo "Using \`$srcdir/config/$out_file' to output insns." echo "Using \`$srcdir/config/$md_file' as machine description file." count=a for f in $tm_file; do count=${count}x done if test $count = ax; then echo "Using \`$srcdir/config/$tm_file' as target machine macro file." else echo "Using the following target machine macro files:" for f in $tm_file; do echo " $srcdir/config/$f" done fi count=a for f in $host_xm_file; do count=${count}x done if test $count = ax; then echo "Using \`$srcdir/config/$host_xm_file' as host machine macro file." else echo "Using the following host machine macro files:" for f in $host_xm_file; do echo " $srcdir/config/$f" done fi if test "$host_xm_file" != "$build_xm_file"; then count=a for f in $build_xm_file; do count=${count}x done if test $count = ax; then echo "Using \`$srcdir/config/$build_xm_file' as build machine macro file." else echo "Using the following build machine macro files:" for f in $build_xm_file; do echo " $srcdir/config/$f" done fi fi if test x$thread_file = x; then if test x$target_thread_file != x; then thread_file=$target_thread_file else thread_file='single' fi fi # Set up the header files. # $links is the list of header files to create. # $vars is the list of shell variables with file names to include. # auto-host.h is the file containing items generated by autoconf and is # the first file included by config.h. null_defines= host_xm_file="auto-host.h gansidecl.h ${host_xm_file} defaults.h hwint.h" # If host=build, it is correct to have hconfig include auto-host.h # as well. If host!=build, we are in error and need to do more # work to find out the build config parameters. if test x$host = x$build then build_xm_file="auto-host.h gansidecl.h ${build_xm_file} defaults.h hwint.h" else # We create a subdir, then run autoconf in the subdir. # To prevent recursion we set host and build for the new # invocation of configure to the build for this invocation # of configure. tempdir=build.$$ rm -rf $tempdir mkdir $tempdir cd $tempdir case ${srcdir} in /* | [A-Za-z]:[\\/]* ) realsrcdir=${srcdir};; *) realsrcdir=../${srcdir};; esac CC=${CC_FOR_BUILD} ${realsrcdir}/configure \ --target=$target --host=$build --build=$build # We just finished tests for the build machine, so rename # the file auto-build.h in the gcc directory. mv auto-host.h ../auto-build.h cd .. rm -rf $tempdir build_xm_file="auto-build.h gansidecl.h ${build_xm_file} defaults.h hwint.h" fi xm_file="gansidecl.h ${xm_file} defaults.h" tm_file="gansidecl.h ${tm_file} defaults.h" vars="host_xm_file tm_file tm_p_file xm_file build_xm_file" links="config.h tm.h tm_p.h tconfig.h hconfig.h" defines="host_xm_defines null_defines null_defines xm_defines build_xm_defines" rm -f config.bak if test -f config.status; then mv -f config.status config.bak; fi # Make the links. while test -n "$vars" do set $vars; var=$1; shift; vars=$* set $links; link=$1; shift; links=$* set $defines; define=$1; shift; defines=$* rm -f $link # Make sure the file is created, even if it is empty. echo >$link # Define TARGET_CPU_DEFAULT if the system wants one. # This substitutes for lots of *.h files. if test "$target_cpu_default" != "" -a $link = tm.h then echo "#define TARGET_CPU_DEFAULT ($target_cpu_default)" >>$link fi for file in `eval echo '$'$var`; do case $file in auto-host.h | auto-build.h ) ;; *) echo '#ifdef IN_GCC' >>$link ;; esac echo "#include \"$file\"" >>$link case $file in auto-host.h | auto-build.h ) ;; *) echo '#endif' >>$link ;; esac done for def in `eval echo '$'$define`; do echo "#ifndef $def" >>$link echo "#define $def" >>$link echo "#endif" >>$link done if test $link = tm.h then # Include insn-codes.h last, because it includes machmode.h, # and we want EXTRA_CC_MODES to be taken into account. echo "#ifndef GENERATOR_FILE" >>$link echo "#include \"insn-codes.h\"" >>$link echo "#endif" >>$link fi done # Truncate the target if necessary if test x$host_truncate_target != x; then target=`echo $target | sed -e 's/\(..............\).*/\1/'` fi # Get the version trigger filename from the toplevel if test "${with_gcc_version_trigger+set}" = set; then gcc_version_trigger=$with_gcc_version_trigger else gcc_version_trigger=${srcdir}/version.c fi changequote(,)dnl gcc_version_full=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^\"]*\)\".*/\1/'` gcc_version=`echo ${gcc_version_full} | sed -e 's/\([^ ]*\) .*/\1/'` # Compile in configure arguments. if test -f configargs.h ; then # Being re-configured. gcc_config_arguments=`grep configuration_arguments configargs.h | sed -e 's/.*\"\([^\"]*\)\".*/\1/'` gcc_config_arguments="$gcc_config_arguments : (reconfigured) $TOPLEVEL_CONFIGURE_ARGUMENTS" else gcc_config_arguments="$TOPLEVEL_CONFIGURE_ARGUMENTS" fi cat > configargs.h </dev/null then cc_set_by_configure="\$(CC)" quoted_cc_set_by_configure="\$(CC)" stage_prefix_set_by_configure="\$(STAGE_PREFIX)" else rm -f symtest.tem if cp -p $srcdir/gcc.c symtest.tem 2>/dev/null then symbolic_link="cp -p" else symbolic_link="cp" fi cc_set_by_configure="\`case '\$(CC)' in stage*) echo '\$(CC)' | sed -e 's|stage|../stage|g';; *) echo '\$(CC)';; esac\`" quoted_cc_set_by_configure="\\\`case '\\\$(CC)' in stage*) echo '\\\$(CC)' | sed -e 's|stage|../stage|g';; *) echo '\\\$(CC)';; esac\\\`" stage_prefix_set_by_configure="\`case '\$(STAGE_PREFIX)' in stage*) echo '\$(STAGE_PREFIX)' | sed -e 's|stage|../stage|g';; *) echo '\$(STAGE_PREFIX)';; esac\`" fi rm -f symtest.tem out_object_file=`basename $out_file .c`.o tm_file_list= for f in $tm_file; do case $f in gansidecl.h | defaults.h ) tm_file_list="${tm_file_list} $f" ;; *) tm_file_list="${tm_file_list} \$(srcdir)/config/$f" ;; esac done host_xm_file_list= for f in $host_xm_file; do case $f in auto-host.h | gansidecl.h | defaults.h | hwint.h ) host_xm_file_list="${host_xm_file_list} $f" ;; *) host_xm_file_list="${host_xm_file_list} \$(srcdir)/config/$f" ;; esac done build_xm_file_list= for f in $build_xm_file; do case $f in auto-build.h | auto-host.h | gansidecl.h | defaults.h | hwint.h ) build_xm_file_list="${build_xm_file_list} $f" ;; *) build_xm_file_list="${build_xm_file_list} \$(srcdir)/config/$f" ;; esac done # Define macro CROSS_COMPILE in compilation # if this is a cross-compiler. # Also use all.cross instead of all.internal # and add cross-make to Makefile. cross_overrides="/dev/null" if test x$host != x$target then cross_defines="CROSS=-DCROSS_COMPILE" cross_overrides="${topdir}/cross-make" fi # If this is a cross-compiler that does not # have its own set of headers then define # inhibit_libc # If this is using newlib, then define inhibit_libc in # LIBGCC2_CFLAGS. This will cause __eprintf to be left out of # libgcc.a, but that's OK because newlib should have its own version of # assert.h. inhibit_libc= if [test x$host != x$target] && [test x$with_headers = x]; then inhibit_libc=-Dinhibit_libc else if [test x$with_newlib = xyes]; then inhibit_libc=-Dinhibit_libc fi fi AC_SUBST(inhibit_libc) # When building gcc with a cross-compiler, we need to fix a few things. # This must come after cross-make as we want all.build to override # all.cross. build_overrides="/dev/null" if test x$build != x$host then build_overrides="${topdir}/build-make" fi # Expand extra_headers to include complete path. # This substitutes for lots of t-* files. extra_headers_list= if test "x$extra_headers" = x then true else # Prepend ${srcdir}/ginclude/ to every entry in extra_headers. for file in $extra_headers; do extra_headers_list="${extra_headers_list} \$(srcdir)/ginclude/${file}" done fi if test x$use_collect2 = xno; then use_collect2= fi # Add a definition of USE_COLLECT2 if system wants one. # Also tell toplev.c what to do. # This substitutes for lots of t-* files. if test x$use_collect2 = x then will_use_collect2= maybe_use_collect2= else will_use_collect2="collect2" maybe_use_collect2="-DUSE_COLLECT2" fi # If we have gas in the build tree, make a link to it. if test -f ../gas/Makefile; then rm -f as; $symbolic_link ../gas/as-new$host_exeext as$host_exeext 2>/dev/null fi # If we have nm in the build tree, make a link to it. if test -f ../binutils/Makefile; then rm -f nm; $symbolic_link ../binutils/nm-new$host_exeext nm$host_exeext 2>/dev/null fi # If we have ld in the build tree, make a link to it. if test -f ../ld/Makefile; then # if test x$use_collect2 = x; then # rm -f ld; $symbolic_link ../ld/ld-new$host_exeext ld$host_exeext 2>/dev/null # else rm -f collect-ld; $symbolic_link ../ld/ld-new$host_exeext collect-ld$host_exeext 2>/dev/null # fi fi # Figure out what assembler we will be using. AC_MSG_CHECKING(what assembler to use) gcc_cv_as= gcc_cv_gas_major_version= gcc_cv_gas_minor_version= gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas if test -x "$DEFAULT_ASSEMBLER"; then gcc_cv_as="$DEFAULT_ASSEMBLER" elif test -x "$AS"; then gcc_cv_as="$AS" elif test -x as$host_exeext; then # Build using assembler in the current directory. gcc_cv_as=./as$host_exeext elif test -f $gcc_cv_as_gas_srcdir/configure.in -a -f ../gas/Makefile; then # Single tree build which includes gas. for f in $gcc_cv_as_gas_srcdir/configure $gcc_cv_as_gas_srcdir/configure.in $gcc_cv_as_gas_srcdir/Makefile.in do changequote(,)dnl gcc_cv_gas_version=`grep '^VERSION=[0-9]*\.[0-9]*' $f` changequote([,])dnl if test x$gcc_cv_gas_version != x; then break fi done changequote(,)dnl gcc_cv_gas_major_version=`expr "$gcc_cv_gas_version" : "VERSION=\([0-9]*\)"` gcc_cv_gas_minor_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.\([0-9]*\)"` changequote([,])dnl fi if test "x$gcc_cv_as" = x -a x$host = x$target; then # Native build. # Search the same directories that the installed compiler will # search. Else we may find the wrong assembler and lose. If we # do not find a suitable assembler binary, then try the user's # path. # # Also note we have to check MD_EXEC_PREFIX before checking the # user's path. Unfortunately, there is no good way to get at the # value of MD_EXEC_PREFIX here. So we do a brute force search # through all the known MD_EXEC_PREFIX values. Ugh. This needs # to be fixed as part of the make/configure rewrite too. if test "x$exec_prefix" = xNONE; then if test "x$prefix" = xNONE; then test_prefix=/usr/local else test_prefix=$prefix fi else test_prefix=$exec_prefix fi # If the loop below does not find an assembler, then use whatever # one we can find in the users's path. # user's path. as=as$host_exeext test_dirs="$test_prefix/lib/gcc-lib/$target/$gcc_version \ $test_prefix/lib/gcc-lib/$target \ /usr/lib/gcc/$target/$gcc_version \ /usr/lib/gcc/$target \ $test_prefix/$target/bin/$target/$gcc_version \ $test_prefix/$target/bin \ /usr/libexec \ /usr/ccs/gcc \ /usr/ccs/bin \ /udk/usr/ccs/bin \ /bsd43/usr/lib/cmplrs/cc \ /usr/cross64/usr/bin \ /usr/lib/cmplrs/cc \ /sysv/usr/lib/cmplrs/cc \ /svr4/usr/lib/cmplrs/cc \ /usr/bin" for dir in $test_dirs; do if test -f $dir/as$host_exeext; then gcc_cv_as=$dir/as$host_exeext break; fi done fi if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then AC_MSG_RESULT("newly built gas") else AC_MSG_RESULT($gcc_cv_as) fi # Figure out what nm we will be using. AC_MSG_CHECKING(what nm to use) if test -x nm$host_exeext; then gcc_cv_nm=./nm$host_exeext elif test x$host = x$target; then # Native build. gcc_cv_nm=nm$host_exeext fi AC_MSG_RESULT($gcc_cv_nm) # Figure out what assembler alignment features are present. AC_MSG_CHECKING(assembler alignment features) gcc_cv_as_alignment_features=none if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then # Gas version 2.6 and later support for .balign and .p2align. # bytes to skip when using .p2align. if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 6 -o "$gcc_cv_gas_major_version" -gt 2; then gcc_cv_as_alignment_features=".balign and .p2align" AC_DEFINE(HAVE_GAS_BALIGN_AND_P2ALIGN) fi # Gas version 2.8 and later support specifying the maximum # bytes to skip when using .p2align. if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 8 -o "$gcc_cv_gas_major_version" -gt 2; then gcc_cv_as_alignment_features=".p2align including maximum skip" AC_DEFINE(HAVE_GAS_MAX_SKIP_P2ALIGN) fi elif test x$gcc_cv_as != x; then # Check if we have .balign and .p2align echo ".balign 4" > conftest.s echo ".p2align 2" >> conftest.s if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then gcc_cv_as_alignment_features=".balign and .p2align" AC_DEFINE(HAVE_GAS_BALIGN_AND_P2ALIGN) fi rm -f conftest.s conftest.o # Check if specifying the maximum bytes to skip when # using .p2align is supported. echo ".p2align 4,,7" > conftest.s if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then gcc_cv_as_alignment_features=".p2align including maximum skip" AC_DEFINE(HAVE_GAS_MAX_SKIP_P2ALIGN) fi rm -f conftest.s conftest.o fi AC_MSG_RESULT($gcc_cv_as_alignment_features) AC_MSG_CHECKING(assembler subsection support) gcc_cv_as_subsections=no if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then gcc_cv_as_subsections="working .subsection -1" fi elif test x$gcc_cv_as != x; then # Check if we have .subsection echo ".subsection 1" > conftest.s if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then gcc_cv_as_subsections=".subsection" if test x$gcc_cv_nm != x; then cat > conftest.s < /dev/null 2>&1; then $gcc_cv_nm conftest.o | grep conftest_label1 > conftest.nm1 $gcc_cv_nm conftest.o | grep conftest_label2 | sed -e 's/label2/label1/' > conftest.nm2 if cmp conftest.nm1 conftest.nm2 > /dev/null 2>&1; then : else gcc_cv_as_subsections="working .subsection -1" fi fi fi fi rm -f conftest.s conftest.o conftest.nm1 conftest.nm2 fi if test x"$gcc_cv_as_subsections" = x"working .subsection -1"; then AC_DEFINE(HAVE_GAS_SUBSECTION_ORDERING, 1, [Define if your assembler supports .subsection and .subsection -1 starts emitting at the beginning of your section.]) fi AC_MSG_RESULT($gcc_cv_as_subsections) AC_MSG_CHECKING(assembler weak support) gcc_cv_as_weak=no if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 2 -o "$gcc_cv_gas_major_version" -gt 2; then gcc_cv_as_weak="yes" fi elif test x$gcc_cv_as != x; then # Check if we have .weak echo " .weak foobar" > conftest.s if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then gcc_cv_as_weak="yes" fi rm -f conftest.s conftest.o conftest.nm1 conftest.nm2 fi if test x"$gcc_cv_as_weak" = xyes; then AC_DEFINE(HAVE_GAS_WEAK, 1, [Define if your assembler supports .weak.]) fi AC_MSG_RESULT($gcc_cv_as_weak) AC_MSG_CHECKING(assembler hidden support) gcc_cv_as_hidden=no if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 10 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then gcc_cv_as_hidden="yes" fi elif test x$gcc_cv_as != x; then # Check if we have .hidden echo " .hidden foobar" > conftest.s echo "foobar:" >> conftest.s if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then gcc_cv_as_hidden="yes" fi rm -f conftest.s conftest.o conftest.nm1 conftest.nm2 fi if test x"$gcc_cv_as_hidden" = xyes; then AC_DEFINE(HAVE_GAS_HIDDEN, 1, [Define if your assembler supports .hidden.]) fi AC_MSG_RESULT($gcc_cv_as_hidden) case "$target" in sparc*-*-*) AC_CACHE_CHECK([assembler .register pseudo-op support], gcc_cv_as_register_pseudo_op, [ gcc_cv_as_register_pseudo_op=unknown if test x$gcc_cv_as != x; then # Check if we have .register echo ".register %g2, #scratch" > conftest.s if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then gcc_cv_as_register_pseudo_op=yes else gcc_cv_as_register_pseudo_op=no fi rm -f conftest.s conftest.o fi ]) if test "x$gcc_cv_as_register_pseudo_op" = xyes; then AC_DEFINE(HAVE_AS_REGISTER_PSEUDO_OP, 1, [Define if your assembler supports .register.]) fi AC_CACHE_CHECK([assembler supports -relax], gcc_cv_as_relax_opt, [ gcc_cv_as_relax_opt=unknown if test x$gcc_cv_as != x; then # Check if gas supports -relax echo ".text" > conftest.s if $gcc_cv_as -relax -o conftest.o conftest.s > /dev/null 2>&1; then gcc_cv_as_relax_opt=yes else gcc_cv_as_relax_opt=no fi rm -f conftest.s conftest.o fi ]) if test "x$gcc_cv_as_relax_opt" = xyes; then AC_DEFINE(HAVE_AS_RELAX_OPTION, 1, [Define if your assembler supports -relax option.]) fi case "$tm_file" in *64*) AC_CACHE_CHECK([for 64 bit support in assembler ($gcc_cv_as)], gcc_cv_as_flags64, [ if test -n "$gcc_cv_as"; then echo ".xword foo" > conftest.s gcc_cv_as_flags64=no for flag in "-xarch=v9" "-64 -Av9"; do if $gcc_cv_as $flag -o conftest.o conftest.s \ > /dev/null 2>&1; then gcc_cv_as_flags64=$flag break fi done rm -f conftest.s conftest.o else if test "$gas" = yes; then gcc_cv_as_flags64="-64 -Av9" else gcc_cv_as_flags64="-xarch=v9" fi fi ]) if test "x$gcc_cv_as_flags64" = xno; then changequote(, ) tmake_file=`echo " $tmake_file " | sed -e 's, sparc/t-sol2-64 , ,' -e 's,^ ,,' -e 's, $,,'` dep_tmake_file=`echo " $dep_tmake_file " | sed -e 's, [^ ]*/config/sparc/t-sol2-64 , ,' -e 's,^ ,,' -e 's, $,,'` changequote([, ]) else AC_DEFINE_UNQUOTED(AS_SPARC64_FLAG, "$gcc_cv_as_flags64", [Define if the assembler supports 64bit sparc.]) fi ;; *) gcc_cv_as_flags64=${gcc_cv_as_flags64-no} ;; esac if test "x$gcc_cv_as_flags64" != xno; then AC_CACHE_CHECK([for assembler offsetable %lo() support], gcc_cv_as_offsetable_lo10, [ gcc_cv_as_offsetable_lo10=unknown if test "x$gcc_cv_as" != x; then # Check if assembler has offsetable %lo() echo "or %g1, %lo(ab) + 12, %g1" > conftest.s echo "or %g1, %lo(ab + 12), %g1" > conftest1.s if $gcc_cv_as $gcc_cv_as_flags64 -o conftest.o conftest.s \ > /dev/null 2>&1 && $gcc_cv_as $gcc_cv_as_flags64 -o conftest1.o conftest1.s \ > /dev/null 2>&1; then if cmp conftest.o conftest1.o > /dev/null 2>&1; then gcc_cv_as_offsetable_lo10=no else gcc_cv_as_offsetable_lo10=yes fi else gcc_cv_as_offsetable_lo10=no fi rm -f conftest.s conftest.o conftest1.s conftest1.o fi ]) if test "x$gcc_cv_as_offsetable_lo10" = xyes; then AC_DEFINE(HAVE_AS_OFFSETABLE_LO10, 1, [Define if your assembler supports offsetable %lo().]) fi fi ;; changequote(,)dnl i[34567]86-*-*) changequote([,])dnl AC_MSG_CHECKING(assembler instructions) gcc_cv_as_instructions= if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2; then gcc_cv_as_instructions="filds fists" fi elif test x$gcc_cv_as != x; then set "filds fists" "filds mem; fists mem" while test $# -gt 0 do echo "$2" > conftest.s if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then gcc_cv_as_instructions=${gcc_cv_as_instructions}$1" " fi shift 2 done rm -f conftest.s conftest.o fi if test x"$gcc_cv_as_instructions" != x; then AC_DEFINE_UNQUOTED(HAVE_GAS_`echo "$gcc_cv_as_instructions" | sed -e 's/ $//' | tr '[a-z ]' '[A-Z_]'`) fi AC_MSG_RESULT($gcc_cv_as_instructions) ;; esac AC_MSG_CHECKING(assembler dwarf2 debug_line support) gcc_cv_as_dwarf2_debug_line=no # ??? Not all targets support dwarf2 debug_line, even within a version # of gas. Moreover, we need to emit a valid instruction to trigger any # info to the output file. So, as supported targets are added to gas 2.11, # add some instruction here to (also) show we expect this might work. # ??? Once 2.11 is released, probably need to add first known working # version to the per-target configury. case "$target" in i?86*-*-* | mips*-*-* | alpha*-*-* | powerpc*-*-* | sparc*-*-*) insn="nop" ;; ia64*-*-*) insn="nop 0" ;; esac if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then if test "$gcc_cv_gas_major_version" -eq 2 \ -a "$gcc_cv_gas_minor_version" -ge 11 \ -o "$gcc_cv_gas_major_version" -gt 2 \ && grep 'obj_format = elf' ../gas/Makefile > /dev/null \ && test x"$insn" != x ; then gcc_cv_as_dwarf2_debug_line="yes" fi elif test x$gcc_cv_as != x -a x"$insn" != x ; then echo ' .file 0 "conftest.s"' > conftest.s echo ' .loc 0 3 0' >> conftest.s echo " $insn" >> conftest.s if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1 \ && grep debug_line conftest.o > /dev/null 2>&1 ; then gcc_cv_as_dwarf2_debug_line="yes" fi rm -f conftest.s conftest.o conftest.nm1 conftest.nm2 fi if test x"$gcc_cv_as_dwarf2_debug_line" = xyes; then AC_DEFINE(HAVE_AS_DWARF2_DEBUG_LINE, 1, [Define if your assembler supports dwarf2 .file/.loc directives.]) fi AC_MSG_RESULT($gcc_cv_as_dwarf2_debug_line) # Figure out what language subdirectories are present. # Look if the user specified --enable-languages="..."; if not, use # the environment variable $LANGUAGES if defined. $LANGUAGES might # go away some day. if test x"${enable_languages+set}" != xset; then if test x"${LANGUAGES+set}" = xset; then enable_languages="`echo ${LANGUAGES} | tr ' ' ','`" else enable_languages=all fi else if test x"${enable_languages}" = x; then AC_MSG_ERROR([--enable-languages needs at least one argument]) fi fi subdirs= for lang in ${srcdir}/*/config-lang.in .. do case $lang in ..) ;; # The odd quoting in the next line works around # an apparent bug in bash 1.12 on linux. changequote(,)dnl ${srcdir}/[*]/config-lang.in) ;; *) lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang` this_lang_libs=`sed -n -e 's,^target_libs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^target_libs=\([^ ]*\).*$,\1,p' $lang` build_by_default=`sed -n -e 's,^build_by_default=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^build_by_default=\([^ ]*\).*$,\1,p' $lang` if test "x$lang_alias" = x then echo "$lang doesn't set \$language." 1>&2 exit 1 fi case ${build_by_default},${enable_languages}, in *,$lang_alias,*) add_this_lang=yes ;; no,*) add_this_lang=no ;; *,all,*) add_this_lang=yes ;; *) add_this_lang=no ;; esac if test x"${add_this_lang}" = xyes; then case $lang in ${srcdir}/ada/config-lang.in) if test x$have_gnat = xyes ; then subdirs="$subdirs `echo $lang | sed -e 's,^.*/\([^/]*\)/config-lang.in$,\1,'`" fi ;; *) subdirs="$subdirs `echo $lang | sed -e 's,^.*/\([^/]*\)/config-lang.in$,\1,'`" ;; esac fi ;; changequote([,])dnl esac done # Make gthr-default.h if we have a thread file. gthread_flags= if test $thread_file != single; then rm -f gthr-default.h echo "#include \"gthr-${thread_file}.h\"" > gthr-default.h gthread_flags=-DHAVE_GTHR_DEFAULT fi AC_SUBST(gthread_flags) # Find out what GC implementation we want, or may, use. AC_ARG_WITH(gc, [ --with-gc={simple,page} Choose the garbage collection mechanism to use with the compiler.], [case "$withval" in simple | page) GGC=ggc-$withval ;; *) AC_MSG_ERROR([$withval is an invalid option to --with-gc]) ;; esac], [GGC=ggc-page]) AC_SUBST(GGC) echo "Using $GGC for garbage collection." # Use the system's zlib library. zlibdir=-L../zlib zlibinc="-I\$(srcdir)/../zlib" AC_ARG_WITH(system-zlib, [ --with-system-zlib use installed libz], zlibdir= zlibinc= ) AC_SUBST(zlibdir) AC_SUBST(zlibinc) AC_DEFINE_UNQUOTED(ENABLE_STD_NAMESPACE, 1, [Define to 1 if you want to enable namespaces (-fhonor-std) by default.]) dnl Very limited version of automake's enable-maintainer-mode AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode is disabled by default AC_ARG_ENABLE(maintainer-mode, [ --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer], maintainer_mode=$enableval, maintainer_mode=no) AC_MSG_RESULT($maintainer_mode) if test "$maintainer_mode" = "yes"; then MAINT='' else MAINT='#' fi AC_SUBST(MAINT)dnl # Make empty files to contain the specs and options for each language. # Then add #include lines to for a compiler that has specs and/or options. lang_specs_files= lang_options_files= lang_tree_files= rm -f specs.h options.h gencheck.h touch specs.h options.h gencheck.h for subdir in . $subdirs do if test -f $srcdir/$subdir/lang-specs.h; then echo "#include \"$subdir/lang-specs.h\"" >>specs.h lang_specs_files="$lang_specs_files $srcdir/$subdir/lang-specs.h" fi if test -f $srcdir/$subdir/lang-options.h; then echo "#include \"$subdir/lang-options.h\"" >>options.h lang_options_files="$lang_options_files $srcdir/$subdir/lang-options.h" fi if test -f $srcdir/$subdir/$subdir-tree.def; then echo "#include \"$subdir/$subdir-tree.def\"" >>gencheck.h lang_tree_files="$lang_tree_files $srcdir/$subdir/$subdir-tree.def" fi done # These (without "all_") are set in each config-lang.in. # `language' must be a single word so is spelled singularly. all_languages= all_boot_languages= all_compilers= all_stagestuff= all_diff_excludes= all_outputs='Makefile intl/Makefile po/Makefile.in fixinc/Makefile gccbug mklibgcc' # List of language makefile fragments. all_lang_makefiles= all_headers= all_lib2funcs= # Add the language fragments. # Languages are added via two mechanisms. Some information must be # recorded in makefile variables, these are defined in config-lang.in. # We accumulate them and plug them into the main Makefile. # The other mechanism is a set of hooks for each of the main targets # like `clean', `install', etc. language_fragments="Make-lang" language_hooks="Make-hooks" for s in .. $subdirs do if test $s != ".." then language= boot_language= compilers= stagestuff= diff_excludes= headers= outputs= lib2funcs= . ${srcdir}/$s/config-lang.in if test "x$language" = x then echo "${srcdir}/$s/config-lang.in doesn't set \$language." 1>&2 exit 1 fi all_lang_makefiles="$all_lang_makefiles ${srcdir}/$s/Make-lang.in" if test -f ${srcdir}/$s/Makefile.in then all_lang_makefiles="$all_lang_makefiles ${srcdir}/$s/Makefile.in" fi all_languages="$all_languages $language" if test "x$boot_language" = xyes then all_boot_languages="$all_boot_languages $language" fi all_compilers="$all_compilers $compilers" all_stagestuff="$all_stagestuff $stagestuff" all_diff_excludes="$all_diff_excludes $diff_excludes" all_headers="$all_headers $headers" all_outputs="$all_outputs $outputs" all_lib2funcs="$all_lib2funcs $lib2funcs" fi done # Since we can't use `::' targets, we link each language in # with a set of hooks, reached indirectly via lang.${target}. rm -f Make-hooks touch Make-hooks target_list="all.build all.cross start.encap rest.encap \ info dvi \ install-normal install-common install-info install-man \ uninstall \ mostlyclean clean distclean extraclean maintainer-clean \ stage1 stage2 stage3 stage4" for t in $target_list do x= for lang in .. $all_languages do if test $lang != ".."; then x="$x $lang.$t" fi done echo "lang.$t: $x" >> Make-hooks done # If we're not building in srcdir, create .gdbinit. if test ! -f Makefile.in; then echo "dir ." > .gdbinit echo "dir ${srcdir}" >> .gdbinit if test x$gdb_needs_out_file_path = xyes then echo "dir ${srcdir}/config/"`dirname ${out_file}` >> .gdbinit fi if test "x$subdirs" != x; then for s in $subdirs do echo "dir ${srcdir}/$s" >> .gdbinit done fi echo "source ${srcdir}/.gdbinit" >> .gdbinit fi # Define variables host_canonical and build_canonical # because some Cygnus local changes in the Makefile depend on them. build_canonical=${build} host_canonical=${host} target_subdir= if test "${host}" != "${target}" ; then target_subdir=${target}/ fi AC_SUBST(build_canonical) AC_SUBST(host_canonical) AC_SUBST(target_subdir) # If $(exec_prefix) exists and is not the same as $(prefix), then compute an # absolute path for gcc_tooldir based on inserting the number of up-directory # movements required to get from $(exec_prefix) to $(prefix) into the basic # $(libsubdir)/@(unlibsubdir) based path. # Don't set gcc_tooldir to tooldir since that's only passed in by the toplevel # make and thus we'd get different behavior depending on where we built the # sources. if test x$exec_prefix = xNONE -o x$exec_prefix = x$prefix; then gcc_tooldir='$(libsubdir)/$(unlibsubdir)/../$(target_alias)' else changequote(<<, >>)dnl # An explanation of the sed strings: # -e 's|^\$(prefix)||' matches and eliminates 'prefix' from 'exec_prefix' # -e 's|/$||' match a trailing forward slash and eliminates it # -e 's|^[^/]|/|' forces the string to start with a forward slash (*) # -e 's|/[^/]*|../|g' replaces each occurance of / with ../ # # (*) Note this pattern overwrites the first character of the string # with a forward slash if one is not already present. This is not a # problem because the exact names of the sub-directories concerned is # unimportant, just the number of them matters. # # The practical upshot of these patterns is like this: # # prefix exec_prefix result # ------ ----------- ------ # /foo /foo/bar ../ # /foo/ /foo/bar ../ # /foo /foo/bar/ ../ # /foo/ /foo/bar/ ../ # /foo /foo/bar/ugg ../../ # dollar='$$' gcc_tooldir="\$(libsubdir)/\$(unlibsubdir)/\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/\$(dollar)||' -e 's|^[^/]|/|' -e 's|/[^/]*|../|g'\`\$(target_alias)" changequote([, ])dnl fi AC_SUBST(gcc_tooldir) AC_SUBST(dollar) # Find a directory in which to install a shared libgcc. AC_ARG_ENABLE(version-specific-runtime-libs, [ --enable-version-specific-runtime-libs Specify that runtime libraries shou ld be installed in a compiler-specific directory ]) AC_ARG_WITH(slibdir, [ --with-slibdir=DIR shared libraries in DIR [LIBDIR]], slibdir="$with_slibdir", if test "${enable_version_specific_runtime_libs+set}" = set; then slibdir='$(libsubdir)' elif test "$host" != "$target"; then slibdir='$(build_tooldir)/lib' else slibdir='$(libdir)' fi) AC_SUBST(slibdir) # Nothing to do for FLOAT_H, float_format already handled. objdir=`pwd` AC_SUBST(objdir) # Process the language and host/target makefile fragments. ${CONFIG_SHELL-/bin/sh} $srcdir/configure.frag $srcdir "$subdirs" "$dep_host_xmake_file" "$dep_tmake_file" # Substitute configuration variables AC_SUBST(subdirs) AC_SUBST(all_boot_languages) AC_SUBST(all_compilers) AC_SUBST(all_diff_excludes) AC_SUBST(all_headers) AC_SUBST(all_lang_makefiles) AC_SUBST(all_languages) AC_SUBST(all_lib2funcs) AC_SUBST(all_stagestuff) AC_SUBST(build_exeext) AC_SUBST(build_install_headers_dir) AC_SUBST(build_xm_file_list) AC_SUBST(cc_set_by_configure) AC_SUBST(quoted_cc_set_by_configure) AC_SUBST(cpp_install_dir) AC_SUBST(dep_host_xmake_file) AC_SUBST(dep_tmake_file) AC_SUBST(extra_c_flags) AC_SUBST(extra_headers_list) AC_SUBST(extra_objs) AC_SUBST(extra_parts) AC_SUBST(extra_passes) AC_SUBST(extra_programs) AC_SUBST(float_h_file) AC_SUBST(gcc_config_arguments) AC_SUBST(gcc_gxx_include_dir) AC_SUBST(libstdcxx_incdir) AC_SUBST(gcc_version) AC_SUBST(gcc_version_full) AC_SUBST(gcc_version_trigger) AC_SUBST(host_exeext) AC_SUBST(host_extra_gcc_objs) AC_SUBST(host_xm_file_list) AC_SUBST(install) AC_SUBST(lang_options_files) AC_SUBST(lang_specs_files) AC_SUBST(lang_tree_files) AC_SUBST(local_prefix) AC_SUBST(maybe_use_collect2) AC_SUBST(md_file) AC_SUBST(objc_boehm_gc) AC_SUBST(out_file) AC_SUBST(out_object_file) AC_SUBST(stage_prefix_set_by_configure) AC_SUBST(symbolic_link) AC_SUBST(thread_file) AC_SUBST(tm_file_list) AC_SUBST(will_use_collect2) AC_SUBST(c_target_objs) AC_SUBST(cxx_target_objs) AC_SUBST_FILE(target_overrides) AC_SUBST_FILE(host_overrides) AC_SUBST(cross_defines) AC_SUBST_FILE(cross_overrides) AC_SUBST_FILE(build_overrides) AC_SUBST_FILE(language_fragments) AC_SUBST_FILE(language_hooks) # Echo that links are built if test x$host = x$target then str1="native " else str1="cross-" str2=" from $host" fi if test x$host != x$build then str3=" on a $build system" fi if test "x$str2" != x || test "x$str3" != x then str4= fi echo "Links are now set up to build a ${str1}compiler for ${target}$str4" 1>&2 if test "x$str2" != x || test "x$str3" != x then echo " ${str2}${str3}." 1>&2 fi # Truncate the target if necessary if test x$host_truncate_target != x; then target=`echo $target | sed -e 's/\(..............\).*/\1/'` fi # Configure the subdirectories # AC_CONFIG_SUBDIRS($subdirs) # Create the Makefile # and configure language subdirectories AC_OUTPUT($all_outputs, [ case x$CONFIG_HEADERS in xauto-host.h:config.in) echo > cstamp-h ;; esac # If the host supports symlinks, point stage[1234] at ../stage[1234] so # bootstrapping and the installation procedure can still use # CC="stage1/xgcc -Bstage1/". If the host doesn't support symlinks, # FLAGS_TO_PASS has been modified to solve the problem there. # This is virtually a duplicate of what happens in configure.lang; we do # an extra check to make sure this only happens if ln -s can be used. if test "$symbolic_link" = "ln -s"; then for d in .. ${subdirs} ; do if test $d != ..; then STARTDIR=`pwd` cd $d for t in stage1 stage2 stage3 stage4 include do rm -f $t $symbolic_link ../$t $t 2>/dev/null done cd $STARTDIR fi done else true ; fi # Avoid having to add intl to our include paths. if test -f intl/libintl.h; then echo creating libintl.h echo '#include "intl/libintl.h"' >libintl.h fi ], [ host='${host}' build='${build}' target='${target}' target_alias='${target_alias}' srcdir='${srcdir}' subdirs='${subdirs}' symbolic_link='${symbolic_link}' program_transform_set='${program_transform_set}' program_transform_name='${program_transform_name}' dep_host_xmake_file='${dep_host_xmake_file}' host_xmake_file='${host_xmake_file}' dep_tmake_file='${dep_tmake_file}' tmake_file='${tmake_file}' thread_file='${thread_file}' gcc_config_arguments='${gcc_config_arguments}' gcc_version='${gcc_version}' gcc_version_full='${gcc_version_full}' gcc_version_trigger='${gcc_version_trigger}' local_prefix='${local_prefix}' build_install_headers_dir='${build_install_headers_dir}' build_exeext='${build_exeext}' host_exeext='${host_exeext}' out_file='${out_file}' gdb_needs_out_file_path='${gdb_needs_out_file_path}' SET_MAKE='${SET_MAKE}' target_list='${target_list}' target_overrides='${target_overrides}' host_overrides='${host_overrides}' cross_defines='${cross_defines}' cross_overrides='${cross_overrides}' build_overrides='${build_overrides}' cpp_install_dir='${cpp_install_dir}' ])