# GCC target-specific configuration file.
# Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.

#This file is part of GCC.

#GCC is free software; you can redistribute it and/or modify it under
#the terms of the GNU General Public License as published by the Free
#Software Foundation; either version 3, or (at your option) any later
#version.

#GCC is distributed in the hope that it will be useful, but WITHOUT
#ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
#FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
#for more details.

#You should have received a copy of the GNU General Public License
#along with GCC; see the file COPYING3.  If not see
#<http://www.gnu.org/licenses/>.

# This is the GCC target-specific configuration file
# where a configuration type is mapped to different system-specific
# definitions and files.  This is invoked by the autoconf-generated
# configure script.  Putting it in a separate shell file lets us skip
# running autoconf when modifying target-specific information.

# When you change the cases in the OS or target switches, consider
# updating ../libgcc/config.host also.

# This file switches on the shell variable ${target}, and also uses the
# following shell variables:
#
#  with_*		Various variables as set by configure.
#
#  enable_threads	Either the name, yes or no depending on whether
#			threads support was requested.
#
#  default_use_cxa_atexit
#			  The default value for the $enable___cxa_atexit
#			variable.  enable___cxa_atexit needs to be set to
#			"yes" for the correct operation of C++ destructors
#			but it relies upon the presence of a non-standard C
#			library	function called	__cxa_atexit.
#			  Since not all C libraries provide __cxa_atexit the
#			default value of $default_use_cxa_atexit is set to
#			"no" except for targets which are known to be OK.
#
#  default_gnu_indirect_function
#                       The default value for the $enable_gnu_indirect_function
#                       variable.  enable_gnu_indirect_function relies
#			upon the presence of a non-standard gnu ifunc support
#			in the assembler, linker and dynamic linker.
#			Since not all libraries provide the dynamic linking
#			support, the default value of
#			$default_gnu_indirect_function is set to
#			"no" except for targets which are known to be OK.
#
#  gas_flag		Either yes or no depending on whether GNU as was
#			requested.
#
#  gnu_ld_flag		Either yes or no depending on whether GNU ld was
#			requested.

# This file sets the following shell variables for use by the
# autoconf-generated configure script:
#
#  cpu_type		The name of the cpu, if different from the first
#			chunk of the canonical target name.
#
#  tm_defines		List of target macros to define for all compilations.
#
#  tm_file		A list of target macro files, if different from
#			"$cpu_type/$cpu_type.h". Usually it's constructed
#			per target in a way like this:
#			tm_file="${tm_file} dbxelf.h elfos.h ${cpu_type.h}/elf.h"
#			Note that the preferred order is:
#			- specific target header "${cpu_type}/${cpu_type.h}"
#			- generic headers like dbxelf.h elfos.h, etc.
#			- specializing target headers like ${cpu_type.h}/elf.h
#			This helps to keep OS specific stuff out of the CPU
#			defining header ${cpu_type}/${cpu_type.h}.
#
#			It is possible to include automatically-generated
#			build-directory files by prefixing them with "./".
#			All other files should relative to $srcdir/config.
#
#  tm_p_file		Location of file with declarations for functions
#			in $out_file.
#
#  out_file		The name of the machine description C support
#			file, if different from "$cpu_type/$cpu_type.c".
#
#  common_out_file	The name of the source file for code shared between
#			the compiler proper and the driver.
#
#  md_file		The name of the machine-description file, if
#			different from "$cpu_type/$cpu_type.md".
#
#  tmake_file		A list of machine-description-specific
#			makefile-fragments, if different from
#			"$cpu_type/t-$cpu_type".
#
#  extra_modes          The name of the file containing a list of extra
#                       machine modes, if necessary and different from
#                       "$cpu_type/$cpu_type-modes.def".
#
#  extra_objs		List of extra objects that should be linked into
#			the compiler proper (cc1, cc1obj, cc1plus)
#			depending on target.
#
#  extra_gcc_objs	List of extra objects that should be linked into
#			the compiler driver (gcc) depending on target.
#
#  extra_headers	List of used header files from the directory
#			config/${cpu_type}.
#
#  user_headers_inc_next_pre
#			List of header file names of internal gcc header
#			files, which should be prefixed by an include_next.
#  user_headers_inc_next_post
#			List of header file names of internal gcc header
#			files, which should be postfixed by an include_next.
#  use_gcc_tgmath	If set, add tgmath.h to the list of used header
#			files.
#
#  use_gcc_stdint	If "wrap", install a version of stdint.h that
#			wraps the system's copy for hosted compilations;
#			if "provide", provide a version of systems without
#			such a system header; otherwise "none", do not
#			provide such a header at all.
#
#  extra_programs	List of extra executables compiled for this target
#			machine, used when linking.
#
#  extra_options	List of target-dependent .opt files.
#
#  c_target_objs	List of extra target-dependent objects that be
#			linked into the C compiler only.
#
#  cxx_target_objs	List of extra target-dependent objects that be
#			linked into the C++ compiler only.
#
#  fortran_target_objs	List of extra target-dependent objects that be
#			linked into the fortran compiler only.
#
#  target_gtfiles       List of extra source files with type information.
#
#  xm_defines		List of macros to define when compiling for the
#			target machine.
#
#  xm_file		List of files to include when compiling for the
#			target machine.
#
#  use_collect2		Set to yes or no, depending on whether collect2
#			will be used.
#
#  target_cpu_default	Set to override the default target model.
#
#  gdb_needs_out_file_path
#			Set to yes if gdb needs a dir command with
#			`dirname $out_file`.
#
#  thread_file		Set to control which thread package to use.
#
#  gas			Set to yes or no depending on whether the target
#			system normally uses GNU as.
#
#  need_64bit_hwint	Set to yes if HOST_WIDE_INT must be 64 bits wide
#			for this target.  This is true if this target
#			supports "long" or "wchar_t" wider than 32 bits,
#			or BITS_PER_WORD is wider than 32 bits.
#			The setting made here must match the one made in
#			other locations such as libcpp/configure.ac
#
#  configure_default_options
#			Set to an initializer for configure_default_options
#			in configargs.h, based on --with-cpu et cetera.
#
#  native_system_header_dir
#			Where system header files are found for this
#			target.  This defaults to /usr/include.  If
#			the --with-sysroot configure option or the
#			--sysroot command line option is used this
#			will be relative to the sysroot.
# target_type_format_char 
# 			The default character to be used for formatting
#			the attribute in a
#			.type symbol_name, ${t_t_f_c}<property>
#			directive.

# The following variables are used in each case-construct to build up the
# outgoing variables:
#
#  gnu_ld		Set to yes or no depending on whether the target
#			system normally uses GNU ld.
#
#  target_has_targetcm	Set to yes or no depending on whether the target
#			has its own definition of targetcm.
#
#  target_has_targetm_common	Set to yes or no depending on whether the
#			target has its own definition of targetm_common.

out_file=
common_out_file=
tmake_file=
extra_headers=
user_headers_inc_next_pre=
user_headers_inc_next_post=
use_gcc_tgmath=yes
use_gcc_stdint=none
extra_programs=
extra_objs=
extra_gcc_objs=
extra_options=
c_target_objs=
cxx_target_objs=
fortran_target_objs=
target_has_targetcm=no
target_has_targetm_common=yes
tm_defines=
xm_defines=
# Set this to force installation and use of collect2.
use_collect2=
# Set this to override the default target model.
target_cpu_default=
# Set this if gdb needs a dir command with `dirname $out_file`
gdb_needs_out_file_path=
# Set this to control which thread package will be used.
thread_file=
# Reinitialize these from the flag values every loop pass, since some
# configure entries modify them.
gas="$gas_flag"
gnu_ld="$gnu_ld_flag"
default_use_cxa_atexit=no
default_gnu_indirect_function=no
target_gtfiles=
need_64bit_hwint=
need_64bit_isa=
native_system_header_dir=/usr/include
target_type_format_char='@'

# Don't carry these over build->host->target.  Please.
xm_file=
md_file=

# Obsolete configurations.
case ${target} in
   picochip-*				\
 | score-*				\
 )
    if test "x$enable_obsolete" != xyes; then
      echo "*** Configuration ${target} is obsolete." >&2
      echo "*** Specify --enable-obsolete to build it anyway." >&2
      echo "*** Support will be REMOVED in the next major release of GCC," >&2
      echo "*** unless a maintainer comes forward." >&2
      exit 1
    fi;;
esac

# Unsupported targets list.  Do not put an entry in this list unless
# it would otherwise be caught by a more permissive pattern.  The list
# should be in alphabetical order.
case ${target} in
 # Avoid special cases that are not obsolete
   arm*-*-*eabi*			\
 )
	;;
   arm*-wince-pe*			\
 | arm*-*-ecos-elf			\
 | arm*-*-elf				\
 | arm*-*-freebsd*			\
 | arm*-*-linux*			\
 | arm*-*-rtems*			\
 | arm*-*-uclinux*			\
 | i[34567]86-go32-*			\
 | i[34567]86-*-go32*			\
 | m68k-*-uclinuxoldabi*		\
 | mips64orion*-*-rtems*		\
 | pdp11-*-bsd				\
 | sparc-hal-solaris2*			\
 | thumb-*-*				\
 | *-*-freebsd[12] | *-*-freebsd[12].*	\
 | *-*-freebsd*aout*			\
 | *-*-linux*aout*			\
 | *-*-linux*coff*			\
 | *-*-linux*libc1*			\
 | *-*-linux*oldld*			\
 | *-*-rtemsaout*			\
 | *-*-rtemscoff*			\
 | *-*-solaris2				\
 | *-*-solaris2.[0-8]			\
 | *-*-solaris2.[0-8].*			\
 | *-*-sysv*				\
 | vax-*-vms*				\
 )
	echo "*** Configuration ${target} not supported" 1>&2
	exit 1
	;;
esac

# Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
# updated in each machine entry.  Also set default extra_headers for some
# machines.
tm_p_file=
cpu_type=`echo ${target} | sed 's/-.*$//'`
cpu_is_64bit=
case ${target} in
m32c*-*-*)
        cpu_type=m32c
	tmake_file=m32c/t-m32c
	target_has_targetm_common=no
        ;;
alpha*-*-*)
	cpu_type=alpha
	need_64bit_hwint=yes
	extra_options="${extra_options} g.opt"
	;;
am33_2.0-*-linux*)
	cpu_type=mn10300
	;;
arm*-*-*)
	cpu_type=arm
	extra_headers="mmintrin.h arm_neon.h"
	target_type_format_char='%'
	c_target_objs="arm-c.o"
	cxx_target_objs="arm-c.o"
	extra_options="${extra_options} arm/arm-tables.opt"
	;;
avr-*-*)
	cpu_type=avr
	c_target_objs="avr-c.o"
	cxx_target_objs="avr-c.o"
	extra_options="${extra_options} avr/avr-tables.opt"
	;;
bfin*-*)
	cpu_type=bfin
	;;
crisv32-*)
	cpu_type=cris
	;;
frv*)	cpu_type=frv
	extra_options="${extra_options} g.opt"
	;;
moxie*)	cpu_type=moxie
	target_has_targetm_common=no
	;;
fido-*-*)
	cpu_type=m68k
	extra_headers=math-68881.h
	extra_options="${extra_options} m68k/m68k-tables.opt"
        ;;
i[34567]86-*-*)
	cpu_type=i386
	c_target_objs="i386-c.o"
	cxx_target_objs="i386-c.o"
	need_64bit_hwint=yes
	extra_options="${extra_options} fused-madd.opt"
	extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
		       pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
		       nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
		       immintrin.h x86intrin.h avxintrin.h xopintrin.h
		       ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
		       lzcntintrin.h bmiintrin.h bmi2intrin.h tbmintrin.h
		       avx2intrin.h fmaintrin.h f16cintrin.h rtmintrin.h
		       xtestintrin.h rdseedintrin.h prfchwintrin.h adxintrin.h"
	;;
x86_64-*-*)
	cpu_type=i386
	c_target_objs="i386-c.o"
	cxx_target_objs="i386-c.o"
	extra_options="${extra_options} fused-madd.opt"
	extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
		       pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
		       nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
		       immintrin.h x86intrin.h avxintrin.h xopintrin.h
		       ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
		       lzcntintrin.h bmiintrin.h tbmintrin.h bmi2intrin.h
		       avx2intrin.h fmaintrin.h f16cintrin.h rtmintrin.h
		       xtestintrin.h rdseedintrin.h prfchwintrin.h adxintrin.h"
	need_64bit_hwint=yes
	;;
ia64-*-*)
	extra_headers=ia64intrin.h
	need_64bit_hwint=yes
	extra_options="${extra_options} g.opt fused-madd.opt"
	;;
hppa*-*-*)
	cpu_type=pa
	;;
lm32*)
	extra_options="${extra_options} g.opt"
	;;
m32r*-*-*)
        cpu_type=m32r
	extra_options="${extra_options} g.opt"
        ;;
m68k-*-*)
	extra_headers=math-68881.h
	extra_options="${extra_options} m68k/m68k-tables.opt"
	;;
microblaze*-*-*)
        cpu_type=microblaze
	extra_options="${extra_options} g.opt"
        ;;
mips*-*-*)
	cpu_type=mips
	need_64bit_hwint=yes
	extra_headers="loongson.h"
	extra_options="${extra_options} g.opt mips/mips-tables.opt"
	;;
picochip-*-*)
        cpu_type=picochip
        ;;
powerpc*-*-*)
	cpu_type=rs6000
	extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h"
	need_64bit_hwint=yes
	case x$with_cpu in
	    xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[34567]|xpower6x|xrs64a|xcell|xa2|xe500mc64|xe5500|Xe6500)
		cpu_is_64bit=yes
		;;
	esac
	extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
	;;
rs6000*-*-*)
	need_64bit_hwint=yes
	extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
	;;
score*-*-*)
	cpu_type=score
	extra_options="${extra_options} g.opt"
	;;
sparc*-*-*)
	cpu_type=sparc
	c_target_objs="sparc-c.o"
	cxx_target_objs="sparc-c.o"
	extra_headers="visintrin.h"
	need_64bit_hwint=yes
	;;
spu*-*-*)
	cpu_type=spu
	need_64bit_hwint=yes
	;;
s390*-*-*)
	cpu_type=s390
	need_64bit_hwint=yes
	extra_options="${extra_options} fused-madd.opt"
	;;
# Note the 'l'; we need to be able to match e.g. "shle" or "shl".
sh[123456789lbe]*-*-* | sh-*-*)
	cpu_type=sh
	need_64bit_hwint=yes
	extra_options="${extra_options} fused-madd.opt"
	;;
v850*-*-*)
	cpu_type=v850
	;;
tic6x-*-*)
	cpu_type=c6x
	extra_headers="c6x_intrinsics.h"
	extra_options="${extra_options} c6x/c6x-tables.opt"
	;;
xtensa*-*-*)
	extra_options="${extra_options} fused-madd.opt"
	;;
tilegx*-*-*)
	cpu_type=tilegx
	need_64bit_hwint=yes
	;;
tilepro-*-*)
	cpu_type=tilepro
	need_64bit_hwint=yes
	;;
esac

tm_file=${cpu_type}/${cpu_type}.h
if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
then
	tm_p_file=${cpu_type}/${cpu_type}-protos.h
fi
extra_modes=
if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
then
	extra_modes=${cpu_type}/${cpu_type}-modes.def
fi
if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
then
	extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
fi

case ${target} in
i[34567]86-*-*)
	if test "x$with_abi" != x; then
		echo "This target does not support --with-abi."
		exit 1
	fi
	if test "x$enable_cld" = xyes; then
		tm_defines="${tm_defines} USE_IX86_CLD=1"
	fi
	if test "x$enable_frame_pointer" = xyes; then
		tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
	fi
	tm_file="vxworks-dummy.h ${tm_file}"
	;;
x86_64-*-*)
	case ${with_abi} in
	"")
		if test "x$with_multilib_list" = xmx32; then
			tm_file="i386/biarchx32.h ${tm_file}"
		else
			tm_file="i386/biarch64.h ${tm_file}"
		fi
		;;
	64 | m64)
		tm_file="i386/biarch64.h ${tm_file}"
		;;
	x32 | mx32)
		tm_file="i386/biarchx32.h ${tm_file}"
		;;
	*)
		echo "Unknown ABI used in --with-abi=$with_abi"
		exit 1
	esac
	if test "x$enable_cld" = xyes; then
		tm_defines="${tm_defines} USE_IX86_CLD=1"
	fi
	if test "x$enable_frame_pointer" = xyes; then
		tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
	fi
	tm_file="vxworks-dummy.h ${tm_file}"
	;;
esac

# On a.out targets, we need to use collect2.
case ${target} in
*-*-*aout*)
	use_collect2=yes
	;;
esac

# Common C libraries.
tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3"

# Common parts for widely ported systems.
case ${target} in
*-*-darwin*)
  tmake_file="t-darwin ${cpu_type}/t-darwin"
  tm_file="${tm_file} darwin.h"
  case ${target} in
  *-*-darwin9*)
    tm_file="${tm_file} darwin9.h"
    ;;
  *-*-darwin[12][0-9]*)
    tm_file="${tm_file} darwin9.h darwin10.h"
    ;;
  esac
  tm_file="${tm_file} ${cpu_type}/darwin.h"
  tm_p_file="${tm_p_file} darwin-protos.h"
  target_gtfiles="\$(srcdir)/config/darwin.c"
  extra_options="${extra_options} darwin.opt"
  c_target_objs="${c_target_objs} darwin-c.o"
  cxx_target_objs="${cxx_target_objs} darwin-c.o"
  fortran_target_objs="darwin-f.o"
  target_has_targetcm=yes
  extra_objs="darwin.o"
  extra_gcc_objs="darwin-driver.o"
  default_use_cxa_atexit=yes
  use_gcc_stdint=wrap
  case ${enable_threads} in
    "" | yes | posix) thread_file='posix' ;;
  esac
  ;;
*-*-freebsd*)
  # This is the generic ELF configuration of FreeBSD.  Later
  # machine-specific sections may refine and add to this
  # configuration.
  #
  # Due to tm_file entry ordering issues that vary between cpu
  # architectures, we only define fbsd_tm_file to allow the
  # machine-specific section to dictate the final order of all
  # entries of tm_file with the minor exception that components
  # of the tm_file set here will always be of the form:
  #
  # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
  #
  # The machine-specific section should not tamper with this
  # ordering but may order all other entries of tm_file as it
  # pleases around the provided core setting.
  gas=yes
  gnu_ld=yes
  fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
  tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
  tmake_file="t-slibgcc"
  case ${enable_threads} in
    no)
      fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
      ;;
    "" | yes | posix)
      thread_file='posix'
      ;;
    *)
      echo 'Unknown thread configuration for FreeBSD'
      exit 1
      ;;
  esac
  fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h"
  extra_options="$extra_options rpath.opt freebsd.opt"
  case ${target} in
    *-*-freebsd[345].*)
      :;;
    *)
      default_use_cxa_atexit=yes;;
  esac
  # need_64bit_hwint=yes # system compiler has this for all arch!
  use_gcc_stdint=wrap
  ;;
*-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu)
  extra_options="$extra_options gnu-user.opt"
  gas=yes
  gnu_ld=yes
  case ${enable_threads} in
    "" | yes | posix) thread_file='posix' ;;
  esac
  tmake_file="t-slibgcc"
  case $target in
    *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-kopensolaris*-gnu)
      :;;
    *-*-gnu*)
      native_system_header_dir=/include
      ;;
  esac
  # glibc / uclibc / bionic switch.
  # uclibc and bionic aren't usable for GNU/Hurd and neither for GNU/k*BSD.
  case $target in
    *linux*)
      extra_options="$extra_options linux.opt";;
  esac
  case $target in
    *-*-*android*)
      tm_defines="$tm_defines DEFAULT_LIBC=LIBC_BIONIC"
      ;;
    *-*-*uclibc*)
      tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
      ;;
    *)
      tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
      ;;
  esac
  # Assume that glibc or uClibc or Bionic are being used and so __cxa_atexit
  # is provided.
  default_use_cxa_atexit=yes
  use_gcc_tgmath=no
  use_gcc_stdint=wrap
  # Add Android userspace support to Linux targets.
  case $target in
    *linux*)
      tm_file="$tm_file linux-android.h"
      extra_options="$extra_options linux-android.opt"
      ;;
  esac
  # Enable compilation for Android by default for *android* targets.
  case $target in
    *-*-*android*)
      tm_defines="$tm_defines ANDROID_DEFAULT=1"
      ;;
    *)
      tm_defines="$tm_defines ANDROID_DEFAULT=0"
      ;;
  esac
  ;;
*-*-netbsd*)
  tmake_file="t-slibgcc"
  gas=yes
  gnu_ld=yes

  # NetBSD 2.0 and later get POSIX threads enabled by default.
  # Allow them to be explicitly enabled on any other version.
  case ${enable_threads} in
    "")
      case ${target} in
        *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
          thread_file='posix'
          tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
          ;;
      esac
      ;;
    yes | posix)
      thread_file='posix'
      tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
      ;;
  esac

  # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
  # default (unless overridden by --disable-__cxa_atexit).
  case ${target} in
    *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
      default_use_cxa_atexit=yes
      ;;
  esac
  ;;
*-*-openbsd*)
  tmake_file="t-openbsd"
  case ${enable_threads} in
    yes)
      thread_file='posix'
      ;;
  esac
  case ${target} in
    *-*-openbsd2.*|*-*-openbsd3.[012])
      tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
  esac
  case ${target} in
    *-*-openbsd4.[3-9]|*-*-openbsd[5-9]*)
      default_use_cxa_atexit=yes
      ;;
  esac
  ;;
*-*-rtems*)
  case ${enable_threads} in
    yes) thread_file='rtems' ;;
  esac
  extra_options="${extra_options} rtems.opt"
  use_gcc_stdint=wrap
  ;;
*-*-uclinux*)
  extra_options="$extra_options gnu-user.opt"
  use_gcc_stdint=wrap
  tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC SINGLE_LIBC"
  ;;
*-*-solaris2*)
  # i?86-*-solaris2* needs to insert headers between cpu default and
  # Solaris 2 specific ones.
  sol2_tm_file="dbxelf.h elfos.h ${cpu_type}/sysv4.h sol2.h ${cpu_type}/sol2.h"
  case ${target} in
    *-*-solaris2.1[0-9]*)
      sol2_tm_file="${sol2_tm_file} sol2-10.h"
      use_gcc_stdint=wrap
      ;;
    *)
      use_gcc_stdint=provide
      ;;
  esac
  if test x$gnu_ld = xyes; then
    tm_file="usegld.h ${tm_file}"
  fi
  if test x$gas = xyes; then
    tm_file="usegas.h ${tm_file}"
  fi
  tm_p_file="${tm_p_file} sol2-protos.h"
  tmake_file="${tmake_file} t-sol2 t-slibgcc"
  c_target_objs="${c_target_objs} sol2-c.o"
  cxx_target_objs="${cxx_target_objs} sol2-c.o sol2-cxx.o"
  extra_objs="sol2.o sol2-stubs.o"
  extra_options="${extra_options} sol2.opt"
  case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
    "":yes:* | yes:yes:* )
      thread_file=posix
      ;;
  esac
  ;;
*-*-*vms*)
  extra_options="${extra_options} vms/vms.opt"
  xmake_file=vms/x-vms
  tmake_file="vms/t-vms t-slibgcc"
  extra_objs="vms.o"
  target_gtfiles="$target_gtfiles \$(srcdir)/config/vms/vms.c"
  tm_p_file="${tm_p_file} vms/vms-protos.h"
  xm_file="vms/xm-vms.h"
  c_target_objs="vms-c.o"
  cxx_target_objs="vms-c.o"
  fortran_target_objs="vms-f.o"
  use_gcc_stdint=provide
  tm_file="${tm_file} vms/vms-stdint.h"
  if test x$gnu_ld != xyes; then
    # Build wrappers for native case.
    extra_programs="ld\$(exeext) ar\$(exeext)"
    tmake_file="$tmake_file vms/t-vmsnative"
  fi
  ;;
*-*-vxworks*)
  tmake_file=t-vxworks
  xm_defines=POSIX
  extra_options="${extra_options} vxworks.opt"
  extra_objs=vxworks.o
  case ${enable_threads} in
    no) ;;
    "" | yes | vxworks) thread_file='vxworks' ;;
    *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
  esac
  ;;
*-*-elf)
  # Assume that newlib is being used and so __cxa_atexit is provided.
  default_use_cxa_atexit=yes
  use_gcc_stdint=wrap
  ;;
esac

case ${target} in
alpha*-*-linux*)
	tm_file="elfos.h ${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
	extra_options="${extra_options} alpha/elf.opt"
	;;
alpha*-*-freebsd*)
	tm_file="elfos.h ${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
	extra_options="${extra_options} alpha/elf.opt"
	;;
alpha*-*-netbsd*)
	tm_file="elfos.h ${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
	extra_options="${extra_options} netbsd.opt netbsd-elf.opt \
		       alpha/elf.opt"
	;;
alpha*-*-openbsd*)
	tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
	tm_file="elfos.h alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h"
	extra_options="${extra_options} openbsd.opt alpha/elf.opt"
	# default x-alpha is only appropriate for dec-osf.
	;;
alpha*-dec-*vms*)
	tm_file="${tm_file} vms/vms.h alpha/vms.h"
	tmake_file="${tmake_file} alpha/t-vms"
	;;
arm-wrs-vxworks)
	tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
	extra_options="${extra_options} arm/vxworks.opt"
	tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
	;;
arm*-*-netbsdelf*)
	tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
	extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
	tmake_file="${tmake_file} arm/t-arm"
	;;
arm*-*-linux-*)			# ARM GNU/Linux with ELF
	tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
	case $target in
	arm*b-*-linux*)
	    tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
	    ;;
	esac
	tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
	tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h arm/aout.h arm/arm.h"
	# Define multilib configuration for arm-linux-androideabi.
	case ${target} in
	*-androideabi)
	    tmake_file="$tmake_file arm/t-linux-androideabi"
	    ;;
	esac
  	# The BPABI long long divmod functions return a 128-bit value in
	# registers r0-r3.  Correctly modeling that requires the use of
	# TImode.
	need_64bit_hwint=yes
	# The EABI requires the use of __cxa_atexit.
	default_use_cxa_atexit=yes
	with_tls=${with_tls:-gnu}
	;;
arm*-*-uclinux*eabi*)		# ARM ucLinux
	tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
	tmake_file="arm/t-arm arm/t-arm-elf arm/t-bpabi"
	tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h arm/aout.h arm/arm.h"
	# The BPABI long long divmod functions return a 128-bit value in
	# registers r0-r3.  Correctly modeling that requires the use of
	# TImode.
	need_64bit_hwint=yes
	# The EABI requires the use of __cxa_atexit.
	default_use_cxa_atexit=yes
	;;
arm*-*-eabi* | arm*-*-symbianelf* | arm*-*-rtemseabi*)
	# The BPABI long long divmod functions return a 128-bit value in
	# registers r0-r3.  Correctly modeling that requires the use of
	# TImode.
	need_64bit_hwint=yes
	default_use_cxa_atexit=yes
	tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
	tmake_file="arm/t-arm arm/t-arm-elf"
	case ${target} in
	arm*-*-eabi*)
	  tm_file="$tm_file newlib-stdint.h"
	  tmake_file="${tmake_file} arm/t-bpabi"
	  use_gcc_stdint=wrap
	  ;;
	arm*-*-rtemseabi*)
	  tm_file="${tm_file} rtems.h arm/rtems-eabi.h newlib-stdint.h"
	  tmake_file="${tmake_file} arm/t-bpabi t-rtems arm/t-rtems-eabi"
	  ;;
	arm*-*-symbianelf*)
	  tm_file="${tm_file} arm/symbian.h"
	  # We do not include t-bpabi for Symbian OS because the system
	  # provides its own implementation of the BPABI functions.
	  tmake_file="${tmake_file} arm/t-symbian"
	  ;;
	esac
	tm_file="${tm_file} arm/aout.h arm/arm.h"
	;;
avr-*-rtems*)
	tm_file="elfos.h avr/elf.h avr/avr-arch.h avr/avr.h dbxelf.h avr/rtems.h rtems.h newlib-stdint.h"
	tmake_file="avr/t-avr avr/t-multilib t-rtems avr/t-rtems"
	extra_gcc_objs="driver-avr.o avr-devices.o"
	extra_objs="avr-devices.o avr-log.o"
	;;
avr-*-*)
	tm_file="elfos.h avr/elf.h avr/avr-arch.h avr/avr.h dbxelf.h avr/avr-stdint.h"
	if test x${with_avrlibc} != xno; then
	    tm_file="${tm_file} ${cpu_type}/avrlibc.h"
	    tm_defines="${tm_defines} WITH_AVRLIBC"
	fi
	tmake_file="avr/t-avr avr/t-multilib"
	use_gcc_stdint=wrap
	extra_gcc_objs="driver-avr.o avr-devices.o"
	extra_objs="avr-devices.o avr-log.o"
	;;
bfin*-elf*)
	tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
	tmake_file=bfin/t-bfin-elf
	use_collect2=no
	;;
bfin*-uclinux*)
	tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h"
	tmake_file=bfin/t-bfin-uclinux
	use_collect2=no
	;;
bfin*-linux-uclibc*)
	tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
	tmake_file="bfin/t-bfin-linux t-slibgcc"
	use_collect2=no
	;;
bfin*-rtems*)
	tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h"
	tmake_file="t-rtems bfin/t-rtems"
	;;
bfin*-*)
	tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
	use_collect2=no
	use_gcc_stdint=wrap
	;;
cr16-*-elf)
        tm_file="elfos.h ${tm_file}"
        tmake_file="${tmake_file} cr16/t-cr16 "
        use_collect2=no
        ;;
crisv32-*-elf | crisv32-*-none)
	tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
	tmake_file="cris/t-cris"
	target_cpu_default=32
	gas=yes
	extra_options="${extra_options} cris/elf.opt"
	use_gcc_stdint=wrap
	;;
cris-*-elf | cris-*-none)
	tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
	tmake_file="cris/t-cris cris/t-elfmulti"
	gas=yes
	extra_options="${extra_options} cris/elf.opt"
	use_gcc_stdint=wrap
	;;
crisv32-*-linux* | cris-*-linux*)
	tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h cris/linux.h"
	# We need to avoid using t-linux, so override default tmake_file
	tmake_file="cris/t-cris cris/t-linux t-slibgcc"
	extra_options="${extra_options} cris/linux.opt"
	case $target in
	  cris-*-*)
		target_cpu_default=10
		;;
	  crisv32-*-*)
		target_cpu_default=32
		;;
	esac
	;;
epiphany-*-elf )
	tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
	tmake_file="epiphany/t-epiphany"
	extra_options="${extra_options} fused-madd.opt"
	extra_objs="$extra_objs mode-switch-use.o resolve-sw-modes.o"
	tm_defines="${tm_defines} EPIPHANY_STACK_OFFSET=${with_stack_offset:-8}"
	extra_headers="epiphany_intrinsics.h"
	;;
fr30-*-elf)
	tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
	;;
frv-*-elf)
	tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
	tmake_file=frv/t-frv
	;;
frv-*-*linux*)
	tm_file="dbxelf.h elfos.h ${tm_file} \
	         gnu-user.h linux.h glibc-stdint.h frv/linux.h"
	tmake_file="${tmake_file} frv/t-frv frv/t-linux"
	;;
moxie-*-elf)
	gas=yes
	gnu_ld=yes
	tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
	tmake_file="${tmake_file} moxie/t-moxie"
	;;
moxie-*-uclinux*)
	gas=yes
	gnu_ld=yes
	tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h"
	tmake_file="${tmake_file} moxie/t-moxie"
	;;
moxie-*-rtems*)
	tmake_file="${tmake_file} moxie/t-moxie t-rtems"
	tm_file="moxie/moxie.h dbxelf.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h"
	;;
h8300-*-rtems*)
	tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
	tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h newlib-stdint.h"
	;;
h8300-*-elf*)
	tmake_file="h8300/t-h8300"
	tm_file="h8300/h8300.h dbxelf.h elfos.h newlib-stdint.h h8300/elf.h"
	;;
hppa*64*-*-linux*)
	target_cpu_default="MASK_PA_11|MASK_PA_20"
	tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h gnu-user.h linux.h \
		 glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
		 pa/pa64-linux.h"
	gas=yes gnu_ld=yes
	need_64bit_hwint=yes
	;;
hppa*-*-linux*)
	target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
	tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \
		 pa/pa32-regs.h pa/pa32-linux.h"
	;;
hppa*-*-openbsd*)
	target_cpu_default="MASK_PA_11"
	tm_file="${tm_file} dbxelf.h elfos.h openbsd.h openbsd-stdint.h openbsd-libpthread.h \
		 pa/pa-openbsd.h pa/pa32-regs.h pa/pa32-openbsd.h"
	tmake_file="${tmake_file} pa/t-openbsd"
	extra_options="${extra_options} openbsd.opt"
	gas=yes
	gnu_ld=yes
	;;
hppa[12]*-*-hpux10*)
	case ${target} in
	hppa1.1-*-* | hppa2*-*-*)
		target_cpu_default="MASK_PA_11"
		;;
	esac
	tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
		 pa/pa-hpux.h pa/pa-hpux10.h"
	extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux10.opt"
	case ${target} in
	*-*-hpux10.[1-9]*)
		tm_file="${tm_file} pa/pa-hpux1010.h"
		extra_options="${extra_options} pa/pa-hpux1010.opt"
		;;
	esac
	use_gcc_stdint=provide
	tm_file="${tm_file} hpux-stdint.h"
	tmake_file="t-slibgcc"
	case ${enable_threads} in
	  "")
	    if test x$have_pthread_h = xyes ; then
	      tmake_file="${tmake_file} pa/t-dce-thr"
	    fi
	    ;;
	  yes | dce)
	    tmake_file="${tmake_file} pa/t-dce-thr"
	    ;;
	esac
	use_collect2=yes
	gas=yes
	if test "x$with_dwarf2" != x; then
		echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
		dwarf2=no
	fi
	;;
hppa*64*-*-hpux11*)
	target_cpu_default="MASK_PA_11|MASK_PA_20"
	if test x$gnu_ld = xyes
	then
		target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
	fi
	tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
		 pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
		 pa/pa-hpux11.h"
	case ${target} in
	*-*-hpux11.[12]*)
		tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
		extra_options="${extra_options} pa/pa-hpux1111.opt"
		;;
	*-*-hpux11.[3-9]*)
		tm_file="${tm_file} pa/pa-hpux1131.h pa/pa-64.h pa/pa64-hpux.h"
		extra_options="${extra_options} pa/pa-hpux1131.opt"
		;;
	*)
		tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
		;;
	esac
	extra_options="${extra_options} pa/pa-hpux.opt \
		       pa/pa-hpux1010.opt pa/pa64-hpux.opt hpux11.opt"
	need_64bit_hwint=yes
	tmake_file="t-slibgcc"
	case x${enable_threads} in
	x | xyes | xposix )
		thread_file=posix
		;;
	esac
	gas=yes
	case ${target} in
	  *-*-hpux11.[01]*)
		use_gcc_stdint=provide
		tm_file="${tm_file} hpux-stdint.h"
		;;
	  *-*-hpux11.[23]*)
		use_gcc_stdint=wrap
		tm_file="${tm_file} hpux-stdint.h"
		;;
	esac
	;;
hppa[12]*-*-hpux11*)
	case ${target} in
	hppa1.1-*-* | hppa2*-*-*)
		target_cpu_default="MASK_PA_11"
		;;
	esac
	tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
		 pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
	extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt \
		       hpux11.opt"
	case ${target} in
	*-*-hpux11.[12]*)
		tm_file="${tm_file} pa/pa-hpux1111.h"
		extra_options="${extra_options} pa/pa-hpux1111.opt"
		;;
	*-*-hpux11.[3-9]*)
		tm_file="${tm_file} pa/pa-hpux1131.h"
		extra_options="${extra_options} pa/pa-hpux1131.opt"
		;;
	esac
	tmake_file="t-slibgcc"
	case x${enable_threads} in
	x | xyes | xposix )
		thread_file=posix
		;;
	esac
	use_collect2=yes
	gas=yes
	case ${target} in
	  *-*-hpux11.[01]*)
		use_gcc_stdint=provide
		tm_file="${tm_file} hpux-stdint.h"
		;;
	  *-*-hpux11.[23]*)
		use_gcc_stdint=wrap
		tm_file="${tm_file} hpux-stdint.h"
		;;
	esac
	if test "x$with_dwarf2" != x; then
		echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
		dwarf2=no
	fi
	;;
i[34567]86-*-darwin*)
	need_64bit_isa=yes
	# Baseline choice for a machine that allows m64 support.
	with_cpu=${with_cpu:-core2}
	tmake_file="${tmake_file} t-slibgcc"
	;;
x86_64-*-darwin*)
	with_cpu=${with_cpu:-core2}
	tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc"
	tm_file="${tm_file} ${cpu_type}/darwin64.h"
	;;
i[34567]86-*-elf*)
	tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
	;;
x86_64-*-elf*)
	tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
	;;
i[34567]86-*-freebsd*)
	tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
	;;
x86_64-*-freebsd*)
	tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
	;;
i[34567]86-*-netbsdelf*)
	tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
	extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
	;;
x86_64-*-netbsd*)
	tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
	extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
	;;
i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
	tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
	extra_options="${extra_options} openbsd.opt"
	# needed to unconfuse gdb
	tmake_file="${tmake_file} t-openbsd i386/t-openbsd"
	# we need collect2 until our bug is fixed...
	use_collect2=yes
	;;
i[34567]86-*-openbsd*)
	tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
	tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
	extra_options="${extra_options} openbsd.opt"
	gas=yes
	gnu_ld=yes
	;;
x86_64-*-openbsd*)
	tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
	tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/x86-64.h i386/openbsdelf.h"
	extra_options="${extra_options} openbsd.opt"
	gas=yes
	gnu_ld=yes
	;;
i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
			# Intel 80386's running GNU/*
			# with ELF format using glibc 2
	tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h"
	case ${target} in
	i[34567]86-*-linux*)
		tm_file="${tm_file} linux.h"
		# Assume modern glibc
		default_gnu_indirect_function=yes
		if test x$enable_targets = xall; then
			tm_file="${tm_file} i386/x86-64.h i386/gnu-user-common.h i386/gnu-user64.h i386/linux-common.h i386/linux64.h"
			tm_defines="${tm_defines} TARGET_BI_ARCH=1"
			tmake_file="${tmake_file} i386/t-linux64"
			x86_multilibs="${with_multilib_list}"
			if test "$x86_multilibs" = "default"; then
				x86_multilibs="m64,m32"
			fi
			x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
			for x86_multilib in ${x86_multilibs}; do
				case ${x86_multilib} in
				m32 | m64 | mx32)
					TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
					;;
				*)
					echo "--with-multilib-list=${x86_with_multilib} not supported."
					exit 1
				esac
			done
			TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
			need_64bit_isa=yes
			case X"${with_cpu}" in
			Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver2|Xbdver1|Xbtver2|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
				;;
			X)
				if test x$with_cpu_64 = x; then
					with_cpu_64=generic
				fi
				;;
			*)
				echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
				echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver2 bdver1 btver2 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
				exit 1
				;;
			esac
		else
			tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h i386/linux-common.h i386/linux.h"
		fi
		;;
	i[34567]86-*-knetbsd*-gnu)
		tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h knetbsd-gnu.h i386/knetbsd-gnu.h"
		;;
	i[34567]86-*-kfreebsd*-gnu)
		tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h kfreebsd-gnu.h i386/kfreebsd-gnu.h"
		;;
	i[34567]86-*-kopensolaris*-gnu)
		tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h kopensolaris-gnu.h i386/kopensolaris-gnu.h"
		;;
	i[34567]86-*-gnu*)
		tm_file="$tm_file i386/gnu-user-common.h i386/gnu-user.h gnu.h i386/gnu.h"
		;;
	esac
	;;
x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
	tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h \
		 i386/x86-64.h i386/gnu-user-common.h i386/gnu-user64.h"
	case ${target} in
	x86_64-*-linux*)
		tm_file="${tm_file} linux.h i386/linux-common.h i386/linux64.h"
		# Assume modern glibc
		default_gnu_indirect_function=yes
	  	;;
	x86_64-*-kfreebsd*-gnu)
		tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu64.h"
		;;
	x86_64-*-knetbsd*-gnu)
		tm_file="${tm_file} knetbsd-gnu.h"
		;;
	esac
	tmake_file="${tmake_file} i386/t-linux64"
	x86_multilibs="${with_multilib_list}"
	if test "$x86_multilibs" = "default"; then
		case ${with_abi} in
		x32 | mx32)
			x86_multilibs="mx32"
			;;
		*)
			x86_multilibs="m64,m32"
			;;
		esac
	fi
	x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
	for x86_multilib in ${x86_multilibs}; do
		case ${x86_multilib} in
		m32 | m64 | mx32)
			TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
			;;
		*)
			echo "--with-multilib-list=${x86_with_multilib} not supported."
			exit 1
		esac
	done
	TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
	;;
i[34567]86-pc-msdosdjgpp*)
	xm_file=i386/xm-djgpp.h
	tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h i386/djgpp-stdint.h"
	native_system_header_dir=/dev/env/DJDIR/include
	extra_options="${extra_options} i386/djgpp.opt"
	gnu_ld=yes
	gas=yes
	use_gcc_stdint=wrap
	;;
i[34567]86-*-lynxos*)
	xm_defines=POSIX
	tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
	tmake_file="${tmake_file} t-lynx"
	extra_options="${extra_options} lynx.opt"
	thread_file=lynx
	gnu_ld=yes
	gas=yes
	;;
i[34567]86-*-nto-qnx*)
	tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h"
	extra_options="${extra_options} i386/nto.opt"
	gnu_ld=yes
	gas=yes
	;;
i[34567]86-*-rtems*)
	tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
	tmake_file="${tmake_file} i386/t-rtems t-rtems"
	;;
i[34567]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*)
	tm_file="${tm_file} i386/unix.h i386/att.h ${sol2_tm_file}"
	# Set default arch_32 to pentium4, tune_32 to generic like the other
	# i386 targets, although config.guess defaults to i386-pc-solaris2*.
	case ${target} in
	*-*-solaris2.9*)
		# Solaris 9/x86 cannot execute SSE/SSE2 instructions by default.
		with_arch_32=${with_arch_32:-pentiumpro}
		;;
	*)
		with_arch_32=${with_arch_32:-pentium4}
		;;
	esac
	with_tune_32=${with_tune_32:-generic}
	case ${target} in
	*-*-solaris2.1[0-9]*)
		tm_file="${tm_file} i386/x86-64.h i386/sol2-bi.h sol2-bi.h"
		tm_defines="${tm_defines} TARGET_BI_ARCH=1"
		tmake_file="$tmake_file i386/t-sol2-64"
		need_64bit_isa=yes
		case X"${with_cpu}" in
		Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver2|Xbdver1|Xbtver2|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
			;;
		X)
			if test x$with_cpu_64 = x; then
				with_cpu_64=generic
			fi
			;;
		*)
			echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
			echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver2 bdver1 btver2 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
			exit 1
			;;
		esac
		;;
	esac
	;;
i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
	tm_file="${tm_file} i386/unix.h i386/att.h elfos.h vx-common.h"
	case ${target} in
	  *-vxworksae*)
	    tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
	    tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
	    ;;
	  *)
	    tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
	    tmake_file="${tmake_file} i386/t-vxworks"
	    ;;
	esac
	;;
i[34567]86-*-cygwin*)
	tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
	xm_file=i386/xm-cygwin.h
	tmake_file="${tmake_file} i386/t-cygming t-slibgcc"
	target_gtfiles="\$(srcdir)/config/i386/winnt.c"
	extra_options="${extra_options} i386/cygming.opt"
	extra_objs="winnt.o winnt-stubs.o"
	c_target_objs="${c_target_objs} msformat-c.o"
	cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
	if test x$enable_threads = xyes; then
		thread_file='posix'
	fi
	use_gcc_stdint=wrap
	;;
i[34567]86-*-mingw* | x86_64-*-mingw*)
	tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h"
	xm_file=i386/xm-mingw32.h
	case ${target} in
		x86_64-*-* | *-w64-*)
			need_64bit_isa=yes
			;;
		*)
			;;
	esac
	if test x$enable_threads = xposix ; then
		tm_file="${tm_file} i386/mingw-pthread.h"
	fi
	tm_file="${tm_file} i386/mingw32.h"
	# This makes the logic if mingw's or the w64 feature set has to be used
	case ${target} in
		*-w64-*)
			user_headers_inc_next_post="${user_headers_inc_next_post} float.h"
			user_headers_inc_next_pre="${user_headers_inc_next_pre} stddef.h stdarg.h"
			tm_file="${tm_file} i386/mingw-w64.h"
			if test x$enable_targets = xall; then
				tm_defines="${tm_defines} TARGET_BI_ARCH=1"
				case X"${with_cpu}" in
				Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver2|Xbdver1|Xbtver2|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
					;;
				X)
					if test x$with_cpu_64 = x; then
						with_cpu_64=generic
					fi
					;;
				*)
					echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
					echo "generic atom core2 corei7 Xcorei7-avx nocona x86-64 bdver2 bdver1 btver2 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
					exit 1
					;;
				esac
			fi
			;;
		*)
			;;
	esac
	tm_file="${tm_file} i386/mingw-stdint.h"
	tmake_file="${tmake_file} i386/t-cygming t-slibgcc"
        case ${target} in
               x86_64-w64-*)
               		tmake_file="${tmake_file} i386/t-mingw-w64"
			;;
	       i[34567]86-w64-*)
			tmake_file="${tmake_file} i386/t-mingw-w32"
			;;
	esac
        native_system_header_dir=/mingw/include
	target_gtfiles="\$(srcdir)/config/i386/winnt.c"
	extra_options="${extra_options} i386/cygming.opt i386/mingw.opt"
	case ${target} in
		*-w64-*)
			extra_options="${extra_options} i386/mingw-w64.opt"
			;;
		*)
			;;
	esac
	extra_objs="winnt.o winnt-stubs.o"
	c_target_objs="${c_target_objs} msformat-c.o"
	cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
	gas=yes
	gnu_ld=yes
	default_use_cxa_atexit=yes
	use_gcc_stdint=wrap
	case ${enable_threads} in
	  "" | yes | win32)
	    thread_file='win32'
	    ;;
	  posix)
	    thread_file='posix'
	    ;;
	esac
	case ${target} in
 		*mingw32crt*)
 			tm_file="${tm_file} i386/crtdll.h"
 			;;
		*mingw32msv* | *mingw*)
			;;
	esac
	;;
i[34567]86-*-interix[3-9]*)
	tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h"
	tmake_file="${tmake_file} i386/t-interix"
	extra_options="${extra_options} rpath.opt i386/interix.opt"
	extra_objs="winnt.o winnt-stubs.o"
	target_gtfiles="\$(srcdir)/config/i386/winnt.c"
	if test x$enable_threads = xyes ; then
		thread_file='posix'
	fi
	if test x$stabs = xyes ; then
		tm_file="${tm_file} dbxcoff.h"
	fi
	;;
ia64*-*-elf*)
	tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
	tmake_file="ia64/t-ia64"
	target_cpu_default="0"
	if test x$gas = xyes
	then
		target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
	fi
	if test x$gnu_ld = xyes
	then
		target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
	fi
	;;
ia64*-*-freebsd*)
	tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
	target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
	tmake_file="${tmake_file} ia64/t-ia64"
	;;
ia64*-*-linux*)
	tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
	tmake_file="${tmake_file} ia64/t-ia64 t-libunwind"
	target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
	;;
ia64*-*-hpux*)
	tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/hpux.h"
	tmake_file="ia64/t-ia64 ia64/t-hpux t-slibgcc"
	target_cpu_default="MASK_GNU_AS"
	case x$enable_threads in
	x | xyes | xposix )
		thread_file=posix
		;;
	esac
	use_collect2=no
	c_target_objs="ia64-c.o"
	cxx_target_objs="ia64-c.o"
	extra_options="${extra_options} ia64/ilp32.opt hpux11.opt"
	use_gcc_stdint=wrap
	tm_file="${tm_file} hpux-stdint.h"
	case ${target} in
	*-*-hpux11.3*)
		tm_file="${tm_file} ia64/hpux-unix2003.h"
		;;
	esac
	;;
ia64-hp-*vms*)
	tm_file="${tm_file} elfos.h ia64/sysv4.h vms/vms.h ia64/vms.h"
	tmake_file="${tmake_file} ia64/t-ia64"
	target_cpu_default="0"
	if test x$gas = xyes
	then
		target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
	fi
	extra_options="${extra_options} ia64/vms.opt"
	;;
iq2000*-*-elf*)
        tm_file="elfos.h newlib-stdint.h iq2000/iq2000.h"
        out_file=iq2000/iq2000.c
        md_file=iq2000/iq2000.md
        ;;
lm32-*-elf*)
        tm_file="dbxelf.h elfos.h ${tm_file}"
	tmake_file="${tmake_file} lm32/t-lm32"
        ;;
lm32-*-rtems*)
	tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h"
	tmake_file="${tmake_file} lm32/t-lm32"
	tmake_file="${tmake_file} t-rtems"
	tmake_file="${tmake_file} lm32/t-rtems"
         ;;
lm32-*-uclinux*)
        tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h"
	tmake_file="${tmake_file} lm32/t-lm32"
        ;;
m32r-*-elf*)
	tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
 	;;
m32rle-*-elf*)
	tm_file="dbxelf.h elfos.h newlib-stdint.h m32r/little.h ${tm_file}"
	;;
m32r-*-rtems*)
	tm_file="dbxelf.h elfos.h ${tm_file} m32r/rtems.h rtems.h newlib-stdint.h"
	tmake_file="m32r/t-m32r t-rtems"
 	;;
m32r-*-linux*)
	tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h"
	# We override the tmake_file for linux -- why?
	tmake_file="m32r/t-linux t-slibgcc"
	gnu_ld=yes
	if test x$enable_threads = xyes; then
		thread_file='posix'
	fi
 	;;
m32rle-*-linux*)
	tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h"
	# We override the tmake_file for linux -- why?
	tmake_file="m32r/t-linux t-slibgcc"
	gnu_ld=yes
	if test x$enable_threads = xyes; then
		thread_file='posix'
	fi
	;;
m68k-*-elf* | fido-*-elf*)
	case ${target} in
	fido-*-elf*)
		# Check that $with_cpu makes sense.
		case $with_cpu in
		"" | "fidoa")
			;;
		*)
			echo "Cannot accept --with-cpu=$with_cpu"
			exit 1
			;;
		esac
		with_cpu=fidoa
		;;
	*)
		default_m68k_cpu=68020
		default_cf_cpu=5206
		;;
	esac
	tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
	tm_defines="${tm_defines} MOTOROLA=1"
	tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
	# Add multilibs for targets other than fido.
	case ${target} in
	fido-*-elf*)
		;;
	*)
		tmake_file="$tmake_file m68k/t-mlibs"
		;;
	esac
	;;
m68k*-*-netbsdelf*)
	default_m68k_cpu=68020
	default_cf_cpu=5475
	tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
	extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
	tm_defines="${tm_defines} MOTOROLA=1"
	;;
m68k*-*-openbsd*)
	default_m68k_cpu=68020
	default_cf_cpu=5475
	# needed to unconfuse gdb
	tm_defines="${tm_defines} OBSD_OLD_GAS"
	tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h m68k/openbsd.h"
	extra_options="${extra_options} openbsd.opt"
	tmake_file="t-openbsd m68k/t-openbsd"
	# we need collect2 until our bug is fixed...
	use_collect2=yes
	;;
m68k-*-uclinux*)		# Motorola m68k/ColdFire running uClinux
				# with uClibc, using the new GNU/Linux-style
				# ABI.
	default_m68k_cpu=68020
	default_cf_cpu=5206
	tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
	extra_options="${extra_options} m68k/uclinux.opt"
 	tm_defines="${tm_defines} MOTOROLA=1"
	tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
	;;
m68k-*-linux*)			# Motorola m68k's running GNU/Linux
				# with ELF format using glibc 2
				# aka the GNU/Linux C library 6.
	default_m68k_cpu=68020
	default_cf_cpu=5475
	with_arch=${with_arch:-m68k}
	tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
	extra_options="${extra_options} m68k/ieee.opt"
	tm_defines="${tm_defines} MOTOROLA=1"
	tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
	;;
m68k-*-rtems*)
	default_m68k_cpu=68020
	default_cf_cpu=5206
	tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
	tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
	tm_defines="${tm_defines} MOTOROLA=1"
	;;
mcore-*-elf)
	tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
	tmake_file=mcore/t-mcore
	inhibit_libc=true
	;;
mep-*-*)
	tm_file="dbxelf.h elfos.h ${tm_file}"
	tmake_file=mep/t-mep
	c_target_objs="mep-pragma.o"
	cxx_target_objs="mep-pragma.o"
	if test -d "${srcdir}/../newlib/libc/include" &&
	   test "x$with_headers" = x; then
		with_headers=yes
	fi
	use_gcc_stdint=wrap
	;;
microblaze*-linux*)
	tm_file="${tm_file} dbxelf.h gnu-user.h linux.h microblaze/linux.h"
	c_target_objs="${c_target_objs} microblaze-c.o"
	cxx_target_objs="${cxx_target_objs} microblaze-c.o"
	;;
microblaze*-*-*)
        tm_file="${tm_file} dbxelf.h"
	c_target_objs="${c_target_objs} microblaze-c.o"
	cxx_target_objs="${cxx_target_objs} microblaze-c.o"
        tmake_file="${tmake_file} microblaze/t-microblaze"
        ;;
mips*-*-netbsd*)			# NetBSD/mips, either endian.
	target_cpu_default="MASK_ABICALLS"
	tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
	extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
	;;
mips*-mti-linux*)
	tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/gnu-user64.h mips/linux64.h mips/linux-common.h mips/mti-linux.h"
	tmake_file="${tmake_file} mips/t-mti-linux"
	tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
	gnu_ld=yes
	gas=yes
	test x$with_llsc != x || with_llsc=yes
	;;
mips64*-*-linux* | mipsisa64*-*-linux*)
	tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/gnu-user64.h mips/linux64.h mips/linux-common.h"
	tmake_file="${tmake_file} mips/t-linux64"
	tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
	case ${target} in
		mips64el-st-linux-gnu)
			tm_file="${tm_file} mips/st.h"
			tmake_file="${tmake_file} mips/t-st"
			;;
		mips64octeon*-*-linux*)
			tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\""
			target_cpu_default=MASK_SOFT_FLOAT_ABI
			;;
		mipsisa64r2*-*-linux*)
			tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
			;;
	esac
	gnu_ld=yes
	gas=yes
	test x$with_llsc != x || with_llsc=yes
	;;
mips*-*-linux*)				# Linux MIPS, either endian.
        tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h"
	if test x$enable_targets = xall; then
		tm_file="${tm_file} mips/gnu-user64.h mips/linux64.h"
		tmake_file="${tmake_file} mips/t-linux64"
	fi
	tm_file="${tm_file} mips/linux-common.h"
	case ${target} in
        mipsisa32r2*)
		tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
                ;;
        mipsisa32*)
		tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
        esac
	test x$with_llsc != x || with_llsc=yes
	;;
mips*-mti-elf*)
	tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/sde.h mips/mti-elf.h"
	tmake_file="mips/t-mti-elf"
	tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
	;;
mips*-sde-elf*)
	tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/sde.h"
	tmake_file="mips/t-sde"
	extra_options="${extra_options} mips/sde.opt"
	case "${with_newlib}" in
	  yes)
	    # newlib / libgloss.
	    ;;
	  *)
	    # MIPS toolkit libraries.
	    tm_file="$tm_file mips/sdemtk.h"
	    tmake_file="$tmake_file mips/t-sdemtk"
	    case ${enable_threads} in
	      "" | yes | mipssde)
		thread_file='mipssde'
		;;
	    esac
	    ;;
	esac
	case ${target} in
	  mipsisa32r2*)
	    tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
	    ;;
	  mipsisa32*)
	    tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32"
	    ;;
	  mipsisa64r2*)
	    tm_defines="MIPS_ISA_DEFAULT=65 MIPS_ABI_DEFAULT=ABI_N32"
	    ;;
	  mipsisa64*)
	    tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32"
	    ;;
	esac
	;;
mipsisa32-*-elf* | mipsisa32el-*-elf* | \
mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
mipsisa64-*-elf* | mipsisa64el-*-elf* | \
mipsisa64r2-*-elf* | mipsisa64r2el-*-elf*)
	tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
	tmake_file="mips/t-isa3264"
	case ${target} in
	  mipsisa32r2*)
	    tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
	    ;;
	  mipsisa32*)
	    tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
	    ;;
	  mipsisa64r2*)
	    tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
	    ;;
	  mipsisa64*)
	    tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64"
	    ;;
	esac
	case ${target} in
	  mipsisa32*-*-elfoabi*)
	    tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
	    tm_file="${tm_file} mips/elfoabi.h"
	    ;;
	  mipsisa64*-*-elfoabi*)
	    tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
	    tm_file="${tm_file} mips/elfoabi.h"
	    ;;
	  *-*-elf*)
	    tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
	    ;;
	esac
	;;
mipsisa64sr71k-*-elf*)
        tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
        tmake_file=mips/t-sr71k
	target_cpu_default="MASK_64BIT|MASK_FLOAT64"
	tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
        ;;
mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
	tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
	tmake_file="mips/t-elf mips/t-sb1"
	target_cpu_default="MASK_64BIT|MASK_FLOAT64"
	tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
	;;
mips-*-elf* | mipsel-*-elf*)
	tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
	tmake_file="mips/t-elf"
	;;
mips64-*-elf* | mips64el-*-elf*)
	tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
	tmake_file="mips/t-elf"
	target_cpu_default="MASK_64BIT|MASK_FLOAT64"
	tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
	;;
mips64vr-*-elf* | mips64vrel-*-elf*)
        tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h"
        tmake_file=mips/t-vr
	tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
        ;;
mips64orion-*-elf* | mips64orionel-*-elf*)
	tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h"
	tmake_file="mips/t-elf"
	target_cpu_default="MASK_64BIT|MASK_FLOAT64"
	tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
	;;
mips*-*-rtems*)
	tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
	tmake_file="mips/t-elf t-rtems mips/t-rtems"
	;;
mips-wrs-vxworks)
	tm_file="elfos.h ${tm_file} mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
	tmake_file="${tmake_file} mips/t-vxworks"
	;;
mipstx39-*-elf* | mipstx39el-*-elf*)
	tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
	tmake_file="mips/t-r3900"
	;;
mmix-knuth-mmixware)
	tm_file="${tm_file} newlib-stdint.h"
	need_64bit_hwint=yes
	use_gcc_stdint=wrap
	;;
mn10300-*-*)
	tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
	if test x$stabs = xyes
	then
		tm_file="${tm_file} dbx.h"
	fi
	use_collect2=no
	use_gcc_stdint=wrap
	;;
pdp11-*-*)
	tm_file="${tm_file} newlib-stdint.h"
	use_gcc_stdint=wrap
	;;
picochip-*)
	tm_file="${tm_file} newlib-stdint.h"
	use_gcc_stdint=wrap
	tmake_file="picochip/t-picochip t-pnt16-warn"
        ;;
# port not yet contributed
#powerpc-*-openbsd*)
#	tmake_file="${tmake_file} rs6000/t-fprules"
#	extra_headers=
#	;;
powerpc-*-darwin*)
	extra_options="${extra_options} rs6000/darwin.opt"
	case ${target} in
	  *-darwin1[0-9]* | *-darwin[8-9]*)
	    tmake_file="${tmake_file} rs6000/t-darwin8"
	    tm_file="${tm_file} rs6000/darwin8.h"
	    ;;
	  *-darwin7*)
	    tm_file="${tm_file} rs6000/darwin7.h"
	    ;;
	  *-darwin[0-6]*)
	    ;;
	esac
	tmake_file="${tmake_file} t-slibgcc"
	extra_headers=altivec.h
	;;
powerpc64-*-darwin*)
	extra_options="${extra_options} ${cpu_type}/darwin.opt"
	tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc"
	tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
	extra_headers=altivec.h
	;;
powerpc*-*-freebsd*)
	tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h"
	extra_options="${extra_options} rs6000/sysv4.opt"
	tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
	case ${target} in
	     powerpc64*)
	    	tm_file="${tm_file} rs6000/default64.h rs6000/freebsd64.h"
		tmake_file="${tmake_file} rs6000/t-freebsd64"
		extra_options="${extra_options} rs6000/linux64.opt"
		;;
	     *)
	        tm_file="${tm_file} rs6000/freebsd.h"
		;;
	esac
	;;
powerpc-*-netbsd*)
	tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
	extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
	tmake_file="${tmake_file} rs6000/t-netbsd"
	extra_options="${extra_options} rs6000/sysv4.opt"
	;;
powerpc-*-eabispe*)
	tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
	extra_options="${extra_options} rs6000/sysv4.opt"
	tmake_file="rs6000/t-spe rs6000/t-ppccomm"
	use_gcc_stdint=wrap
	;;
powerpc-*-eabisimaltivec*)
	tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
	extra_options="${extra_options} rs6000/sysv4.opt"
	tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
	use_gcc_stdint=wrap
	;;
powerpc-*-eabisim*)
	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
	extra_options="${extra_options} rs6000/sysv4.opt"
	tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
	use_gcc_stdint=wrap
	;;
powerpc-*-elf*)
	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
	extra_options="${extra_options} rs6000/sysv4.opt"
	tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
	;;
powerpc-*-eabialtivec*)
	tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
	extra_options="${extra_options} rs6000/sysv4.opt"
	tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
	use_gcc_stdint=wrap
	;;
powerpc-xilinx-eabi*)
	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h rs6000/xilinx.h"
	extra_options="${extra_options} rs6000/sysv4.opt rs6000/xilinx.opt"
	tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm rs6000/t-xilinx"
	use_gcc_stdint=wrap
	;;
powerpc-*-eabi*)
	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
	extra_options="${extra_options} rs6000/sysv4.opt"
	tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
	use_gcc_stdint=wrap
	;;
powerpc-*-rtems*)
	tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
	extra_options="${extra_options} rs6000/sysv4.opt"
	tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm"
	;;
powerpc-*-linux* | powerpc64-*-linux*)
	tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h rs6000/sysv4.h"
	extra_options="${extra_options} rs6000/sysv4.opt"
	tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
	maybe_biarch=yes
	case ${target} in
	    powerpc64-*-linux*spe* | powerpc64-*-linux*paired*)
	    	echo "*** Configuration ${target} not supported" 1>&2
		exit 1
		;;
	    powerpc-*-linux*spe* | powerpc-*-linux*paired*)
		maybe_biarch=
		;;
	    powerpc64-*-linux*)
	    	test x$with_cpu != x || cpu_is_64bit=yes
		maybe_biarch=always
		;;
	esac
	case ${maybe_biarch}:${enable_targets}:${cpu_is_64bit} in
	    always:* | yes:*powerpc64* | yes:all:* | yes:*:yes)
		if test x$cpu_is_64bit = xyes; then
		    tm_file="${tm_file} rs6000/default64.h"
		fi
		tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h"
		tmake_file="$tmake_file rs6000/t-linux64"
		extra_options="${extra_options} rs6000/linux64.opt"
		;;
	    *)
		tm_file="${tm_file} rs6000/linux.h glibc-stdint.h"
		;;
	esac
	case ${target} in
	    powerpc*-*-linux*ppc476*)
		tm_file="${tm_file} rs6000/476.h"
		extra_options="${extra_options} rs6000/476.opt" ;;
	    powerpc*-*-linux*altivec*)
		tm_file="${tm_file} rs6000/linuxaltivec.h" ;;
	    powerpc*-*-linux*spe*)
		tm_file="${tm_file} rs6000/linuxspe.h rs6000/e500.h" ;;
	    powerpc*-*-linux*paired*)
		tm_file="${tm_file} rs6000/750cl.h" ;;
	esac
	if test x${enable_secureplt} = xyes; then
		tm_file="rs6000/secureplt.h ${tm_file}"
	fi
	;;
powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
	tm_file="${tm_file} elfos.h freebsd-spec.h rs6000/sysv4.h"
	tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
	extra_options="${extra_options} rs6000/sysv4.opt"
	extra_headers=ppc-asm.h
	case ${target} in
	  *-vxworksae*)
	    tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h"
	    tmake_file="${tmake_file} rs6000/t-vxworksae"
	    ;;
	  *-vxworks*)
	    tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
	    ;;
	esac
	;;
powerpc-*-lynxos*)
	xm_defines=POSIX
	tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
	tmake_file="t-lynx rs6000/t-lynx"
	extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
	thread_file=lynx
	gnu_ld=yes
	gas=yes
	;;
powerpcle-*-elf*)
	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
	tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
	extra_options="${extra_options} rs6000/sysv4.opt"
	;;
powerpcle-*-eabisim*)
	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
	tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
	extra_options="${extra_options} rs6000/sysv4.opt"
	use_gcc_stdint=wrap
	;;
powerpcle-*-eabi*)
	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
	tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
	extra_options="${extra_options} rs6000/sysv4.opt"
	use_gcc_stdint=wrap
	;;
rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
	tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h rs6000/aix-stdint.h"
	tmake_file="rs6000/t-aix43 t-slibgcc"
	extra_options="${extra_options} rs6000/aix64.opt"
	use_collect2=yes
	thread_file='aix'
	use_gcc_stdint=provide
	extra_headers=
	;;
rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
	tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h rs6000/aix-stdint.h"
	extra_options="${extra_options} rs6000/aix64.opt"
	tmake_file="rs6000/t-aix43 t-slibgcc"
	use_collect2=yes
	thread_file='aix'
	use_gcc_stdint=wrap
	extra_headers=
	;;
rs6000-ibm-aix5.2.* | powerpc-ibm-aix5.2.*)
	tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h rs6000/aix-stdint.h"
	tmake_file="rs6000/t-aix52 t-slibgcc"
	extra_options="${extra_options} rs6000/aix64.opt"
	use_collect2=yes
	thread_file='aix'
	use_gcc_stdint=wrap
	extra_headers=
	;;
rs6000-ibm-aix5.3.* | powerpc-ibm-aix5.3.*)
	tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h rs6000/aix-stdint.h"
	tmake_file="rs6000/t-aix52 t-slibgcc"
	extra_options="${extra_options} rs6000/aix64.opt"
	use_collect2=yes
	thread_file='aix'
	use_gcc_stdint=wrap
	extra_headers=altivec.h
	;;
rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*)
	tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h rs6000/aix-stdint.h"
	tmake_file="rs6000/t-aix52 t-slibgcc"
	extra_options="${extra_options} rs6000/aix64.opt"
	use_collect2=yes
	thread_file='aix'
	use_gcc_stdint=wrap
	extra_headers=altivec.h
	;;
rl78-*-elf*)
	tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
	target_has_targetm_common=no
	c_target_objs="rl78-c.o"
	cxx_target_objs="rl78-c.o"
	tmake_file="${tmake_file} rl78/t-rl78"
	;;
rx-*-elf*)
	tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
	tmake_file="${tmake_file} rx/t-rx"
	;;
s390-*-linux*)
	default_gnu_indirect_function=yes
	tm_file="s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
	if test x$enable_targets = xall; then
		tmake_file="${tmake_file} s390/t-linux64"
	fi
	;;
s390x-*-linux*)
	default_gnu_indirect_function=yes
	tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
	tm_p_file=s390/s390-protos.h
	md_file=s390/s390.md
	extra_modes=s390/s390-modes.def
	out_file=s390/s390.c
	tmake_file="${tmake_file} s390/t-linux64"
	;;
s390x-ibm-tpf*)
        tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h s390/tpf.h"
        tm_p_file=s390/s390-protos.h
        md_file=s390/s390.md
        extra_modes=s390/s390-modes.def
        out_file=s390/s390.c
        thread_file='tpf'
	extra_options="${extra_options} s390/tpf.opt"
	;;
score-*-elf)
	gas=yes
	gnu_ld=yes
        tm_file="dbxelf.h elfos.h score/elf.h score/score.h newlib-stdint.h"
        ;;
sh-*-elf* | sh[12346l]*-*-elf* | \
  sh-*-linux* | sh[2346lbe]*-*-linux* | \
  sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
  sh64-*-netbsd* | sh64l*-*-netbsd*)
	tmake_file="${tmake_file} sh/t-sh sh/t-elf"
	if test x${with_endian} = x; then
		case ${target} in
		sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
		shbe-*-* | sheb-*-*)		   with_endian=big,little ;;
		sh[1234]l* | sh[34]*-*-linux*)	   with_endian=little ;;
		shl* | sh64l* | sh*-*-linux* | \
		  sh5l* | sh-superh-elf)	   with_endian=little,big ;;
		sh[1234]*-*-*)			   with_endian=big ;;
		*)				   with_endian=big,little ;;
		esac
	fi
	# TM_ENDIAN_CONFIG is used by t-sh to determine multilibs.
	#  First word : the default endian.
	#  Second word: the secondary endian (optional).
	case ${with_endian} in
	big)		TM_ENDIAN_CONFIG=mb ;;
	little)		TM_ENDIAN_CONFIG=ml ;;
	big,little)	TM_ENDIAN_CONFIG="mb ml" ;;
	little,big)	TM_ENDIAN_CONFIG="ml mb" ;;
	*)	echo "with_endian=${with_endian} not supported."; exit 1 ;;
	esac
	case ${with_endian} in
	little*)	tm_file="sh/little.h ${tm_file}" ;;
	esac
	tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h"
	case ${target} in
	sh*-*-linux*)	tmake_file="${tmake_file} sh/t-linux"
			tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h sh/linux.h" ;;
	sh*-*-netbsd*)
			tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h"
			extra_options="${extra_options} netbsd.opt netbsd-elf.opt"

			;;
	sh*-superh-elf)	if test x$with_libgloss != xno; then
                                with_libgloss=yes
                                tm_file="${tm_file} sh/newlib.h"
                        fi
			tm_file="${tm_file} sh/embed-elf.h"
			tm_file="${tm_file} sh/superh.h"
			extra_options="${extra_options} sh/superh.opt" ;;
	*)		if test x$with_newlib = xyes \
			   && test x$with_libgloss = xyes; then
				tm_file="${tm_file} sh/newlib.h"
			fi
			tm_file="${tm_file} sh/embed-elf.h" ;;
	esac
	case ${target} in
	sh5*-*-netbsd*)
		# SHmedia, 32-bit ABI
		tmake_file="${tmake_file} sh/t-sh64"
		;;
	sh64*-netbsd*)
		# SHmedia, 64-bit ABI
		tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5-64"
		;;
	*-*-netbsd)
		;;
	sh64*-*-linux*)
		tmake_file="${tmake_file} sh/t-sh64"
		tm_file="${tm_file} sh/sh64.h"
		extra_headers="shmedia.h ushmedia.h sshmedia.h"
		;;
	sh64*)
		tmake_file="${tmake_file} sh/t-sh64"
		tm_file="${tm_file} sh/sh64.h"
		if test x$with_newlib = xyes; then
			tm_file="${tm_file} newlib-stdint.h"
		fi
		extra_headers="shmedia.h ushmedia.h sshmedia.h"
		;;
	*-*-elf*)
		tm_file="${tm_file} newlib-stdint.h"
		;;
	esac
	# sed el/eb endian suffixes away to avoid confusion with sh[23]e
	case `echo ${target} | sed 's/e[lb]-/-/'` in
	sh64*-*-netbsd*)	sh_cpu_target=sh5-64media ;;
	sh64* | sh5*-*-netbsd*)	sh_cpu_target=sh5-32media ;;
	sh4a_single_only*)	sh_cpu_target=sh4a-single-only ;;
	sh4a_single*)		sh_cpu_target=sh4a-single ;;
	sh4a_nofpu*)		sh_cpu_target=sh4a-nofpu ;;
	sh4al)			sh_cpu_target=sh4al ;;
	sh4a*)			sh_cpu_target=sh4a ;;
	sh4_single_only*)	sh_cpu_target=sh4-single-only ;;
	sh4_single*)		sh_cpu_target=sh4-single ;;
	sh4_nofpu*)		sh_cpu_target=sh4-nofpu ;;
	sh4* | sh-superh-*)	sh_cpu_target=sh4 ;;
	sh3e*)			sh_cpu_target=sh3e ;;
	sh*-*-netbsd* | sh3*)	sh_cpu_target=sh3 ;;
	sh2a_single_only*)	sh_cpu_target=sh2a-single-only ;;
	sh2a_single*)		sh_cpu_target=sh2a-single ;;
	sh2a_nofpu*)		sh_cpu_target=sh2a-nofpu ;;
	sh2a*)			sh_cpu_target=sh2a ;;
	sh2e*)			sh_cpu_target=sh2e ;;
	sh2*)			sh_cpu_target=sh2 ;;
	*)			sh_cpu_target=sh1 ;;
	esac
	# did the user say --without-fp ?
	if test x$with_fp = xno; then
		case ${sh_cpu_target} in
		sh5-*media)	sh_cpu_target=${sh_cpu_target}-nofpu ;;
		sh4al | sh1)	;;
		sh4a* )		sh_cpu_target=sh4a-nofpu ;;
		sh4*)		sh_cpu_target=sh4-nofpu ;;
		sh3*)		sh_cpu_target=sh3 ;;
		sh2a*)		sh_cpu_target=sh2a-nofpu ;;
		sh2*)		sh_cpu_target=sh2 ;;
		*)	echo --without-fp not available for $target: ignored
		esac
		tm_defines="$tm_defines STRICT_NOFPU=1"
	fi
	sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
	case $sh_cpu_default in
	sh5-64media-nofpu | sh5-64media | \
	  sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
	  sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
	  sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
	  sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
	  sh3e | sh3 | sh2e | sh2 | sh1) ;;
	"")	sh_cpu_default=${sh_cpu_target} ;;
	*)	echo "with_cpu=$with_cpu not supported"; exit 1 ;;
	esac
	sh_multilibs=${with_multilib_list}
	if test "$sh_multilibs" = "default" ; then
		case ${target} in
		sh64-superh-linux* | \
		sh[1234]*)	sh_multilibs=${sh_cpu_target} ;;
		sh64* | sh5*)	sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
		sh-superh-*)	sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
		sh*-*-linux*)	sh_multilibs=m1,m3e,m4 ;;
		sh*-*-netbsd*)	sh_multilibs=m3,m3e,m4 ;;
		*) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
		esac
		if test x$with_fp = xno; then
			sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
		fi
	fi
	target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
	tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
	tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
	sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^[Ss][Hh]/m/' -e 's/ [Ss][Hh]/ m/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
	for sh_multilib in ${sh_multilibs}; do
		case ${sh_multilib} in
		m1 | m2 | m2e | m3 | m3e | \
		m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\
		m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \
		m2a | m2a-single | m2a-single-only | m2a-nofpu | \
		m5-64media | m5-64media-nofpu | \
		m5-32media | m5-32media-nofpu | \
		m5-compact | m5-compact-nofpu)
			# TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition
			# It is passed to MULTIILIB_OPTIONS verbatim.
			TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}"
			tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
			;;
		\!*)	# TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh
			# It is passed the MULTILIB_EXCEPTIONS verbatim.
			TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;;
		*)
			echo "with_multilib_list=${sh_multilib} not supported."
			exit 1
			;;
		esac
	done
	TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'`
	if test x${enable_incomplete_targets} = xyes ; then
		tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
	fi
	tm_file="$tm_file ./sysroot-suffix.h"
	tmake_file="$tmake_file t-sysroot-suffix"
	;;
sh-*-rtems*)
	tmake_file="sh/t-sh t-rtems sh/t-rtems"
	tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
	;;
sh-wrs-vxworks)
	tmake_file="$tmake_file sh/t-sh sh/t-vxworks"
	tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
	;;
sparc-*-elf*)
	tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h"
	case ${target} in
	    *-leon-*)
		tmake_file="sparc/t-sparc sparc/t-leon"
		;;
	    *-leon[3-9]*)
		tmake_file="sparc/t-sparc sparc/t-leon3"
		;;
	    *)
		tmake_file="sparc/t-sparc sparc/t-elf"
		;;
	esac
	;;
sparc-*-rtems*)
	tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
	tmake_file="sparc/t-sparc sparc/t-elf t-rtems"
	;;
sparc-*-linux*)
	tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/tso.h"
	extra_options="${extra_options} sparc/long-double-switch.opt"
	case ${target} in
	    *-leon-*)
		tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon"
		;;
	    *-leon[3-9]*)
		tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon3"
		;;
	    *)
		tmake_file="${tmake_file} sparc/t-sparc"
		;;
	esac
	if test x$enable_targets = xall; then
		tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
		tmake_file="${tmake_file} sparc/t-linux64"
	else
		tm_file="${tm_file} sparc/linux.h"
	fi
	;;
sparc-*-netbsdelf*)
	tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
	extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
	extra_options="${extra_options} sparc/long-double-switch.opt"
	tmake_file="${tmake_file} sparc/t-sparc"
	;;
sparc*-*-solaris2*)
	tm_file="sparc/biarch64.h ${tm_file} ${sol2_tm_file} sol2-bi.h sparc/tso.h"
	case ${target} in
	    sparc64-*-* | sparcv9-*-*)
		tm_file="sparc/default-64.h ${tm_file}"
		;;
	    *)
		test x$with_cpu != x || with_cpu=v9
		;;
	esac
	tmake_file="${tmake_file} sparc/t-sparc sparc/t-sol2-64"
	;;
sparc-wrs-vxworks)
	tm_file="${tm_file} elfos.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
	tmake_file="${tmake_file} sparc/t-sparc sparc/t-vxworks"
	;;
sparc64-*-elf*)
	tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
	extra_options="${extra_options}"
	tmake_file="${tmake_file} sparc/t-sparc"
	;;
sparc64-*-rtems*)
	tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
	extra_options="${extra_options}"
	tmake_file="${tmake_file} sparc/t-sparc t-rtems"
	;;
sparc64-*-linux*)
	tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/default-64.h sparc/linux64.h sparc/tso.h"
	extra_options="${extra_options} sparc/long-double-switch.opt"
	tmake_file="${tmake_file} sparc/t-sparc sparc/t-linux64"
	;;
sparc64-*-freebsd*|ultrasparc-*-freebsd*)
	tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
	extra_options="${extra_options} sparc/long-double-switch.opt"
	case "x$with_cpu" in
		xultrasparc) ;;
		x) with_cpu=ultrasparc ;;
		*) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
	esac
	tmake_file="${tmake_file} sparc/t-sparc"
	;;
sparc64-*-netbsd*)
	tm_file="sparc/biarch64.h ${tm_file}"
	tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
	extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
	extra_options="${extra_options} sparc/long-double-switch.opt"
	tmake_file="${tmake_file} sparc/t-sparc sparc/t-netbsd64"
	;;
sparc64-*-openbsd*)
	tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp64-elf.h"
	tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
	extra_options="${extra_options} openbsd.opt"
	extra_options="${extra_options}"
	gas=yes gnu_ld=yes
	with_cpu=ultrasparc
	tmake_file="${tmake_file} sparc/t-sparc"
	;;
spu-*-elf*)
	tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h newlib-stdint.h"
	tmake_file="spu/t-spu-elf"
        native_system_header_dir=/include
	extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h spu_cache.h"
	extra_modes=spu/spu-modes.def
	c_target_objs="${c_target_objs} spu-c.o"
	cxx_target_objs="${cxx_target_objs} spu-c.o"
	;;
tic6x-*-elf)
	tm_file="elfos.h ${tm_file} c6x/elf-common.h c6x/elf.h"
	tm_file="${tm_file} dbxelf.h tm-dwarf2.h newlib-stdint.h"
	tmake_file="c6x/t-c6x c6x/t-c6x-elf"
	use_collect2=no
	;;
tic6x-*-uclinux)
	tm_file="elfos.h ${tm_file} gnu-user.h linux.h c6x/elf-common.h c6x/uclinux-elf.h"
	tm_file="${tm_file} dbxelf.h tm-dwarf2.h glibc-stdint.h"
	tm_file="${tm_file} ./sysroot-suffix.h"
	tmake_file="t-sysroot-suffix t-slibgcc"
	tmake_file="${tmake_file} c6x/t-c6x c6x/t-c6x-elf c6x/t-c6x-uclinux"
	use_collect2=no
	;;
tilegx-*-linux*)
	tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h tilegx/linux.h ${tm_file}"
        tmake_file="${tmake_file} tilegx/t-tilegx"
	extra_objs="mul-tables.o"
	c_target_objs="tilegx-c.o"
	cxx_target_objs="tilegx-c.o"
	extra_headers="feedback.h"
	;;
tilepro-*-linux*)
	tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h tilepro/linux.h ${tm_file}"
        tmake_file="${tmake_file} tilepro/t-tilepro"
	extra_objs="mul-tables.o"
	c_target_objs="tilepro-c.o"
	cxx_target_objs="tilepro-c.o"
	extra_headers="feedback.h"
	;;
v850-*-rtems*)
	target_cpu_default="TARGET_CPU_generic"
	tm_file="dbxelf.h elfos.h v850/v850.h"
	tm_file="${tm_file} rtems.h v850/rtems.h newlib-stdint.h"
	tmake_file="${tmake_file} v850/t-v850"
	tmake_file="${tmake_file} t-rtems v850/t-rtems"
	use_collect2=no
	c_target_objs="v850-c.o"
	cxx_target_objs="v850-c.o"
	;;
v850*-*-*)
	case ${target} in
	v850e2v3-*-*)
		target_cpu_default="TARGET_CPU_v850e2v3"
		;;
	v850e2-*-*)
		target_cpu_default="TARGET_CPU_v850e2"
		;;
	v850e1-*-* | v850es-*-*)
		target_cpu_default="TARGET_CPU_v850e1"
		;;
	v850e-*-*)
		target_cpu_default="TARGET_CPU_v850e"
		;;
	v850-*-*)
		target_cpu_default="TARGET_CPU_generic"
		;;
	esac
	tm_file="dbxelf.h elfos.h newlib-stdint.h v850/v850.h"
	if test x$stabs = xyes
	then
		tm_file="${tm_file} dbx.h"
	fi
	use_collect2=no
	c_target_objs="v850-c.o"
	cxx_target_objs="v850-c.o"
	use_gcc_stdint=wrap
	;;
vax-*-linux*)
	tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h vax/elf.h vax/linux.h"
	extra_options="${extra_options} vax/elf.opt"
	;;
vax-*-netbsdelf*)
	tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
	extra_options="${extra_options} netbsd.opt netbsd-elf.opt vax/elf.opt"
	;;
vax-*-openbsd*)
	tm_file="vax/vax.h vax/openbsd1.h openbsd.h openbsd-stdint.h openbsd-pthread.h vax/openbsd.h"
	extra_options="${extra_options} openbsd.opt"
	use_collect2=yes
	;;
xstormy16-*-elf)
	# For historical reasons, the target files omit the 'x'.
	tm_file="dbxelf.h elfos.h newlib-stdint.h stormy16/stormy16.h"
	tm_p_file=stormy16/stormy16-protos.h
	md_file=stormy16/stormy16.md
	out_file=stormy16/stormy16.c
	extra_options=stormy16/stormy16.opt
	tmake_file="stormy16/t-stormy16"
	;;
xtensa*-*-elf*)
	tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h xtensa/elf.h"
	extra_options="${extra_options} xtensa/elf.opt"
	;;
xtensa*-*-linux*)
	tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/linux.h"
	tmake_file="${tmake_file} xtensa/t-xtensa"
	;;
am33_2.0-*-linux*)
	tm_file="mn10300/mn10300.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h mn10300/linux.h"
	gas=yes gnu_ld=yes
	use_collect2=no
	;;
m32c-*-rtems*)
	tm_file="dbxelf.h elfos.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
	tmake_file="${tmake_file} t-rtems"
	c_target_objs="m32c-pragma.o"
	cxx_target_objs="m32c-pragma.o"
 	;;
m32c-*-elf*)
	tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
	c_target_objs="m32c-pragma.o"
	cxx_target_objs="m32c-pragma.o"
 	;;
*)
	echo "*** Configuration ${target} not supported" 1>&2
	exit 1
	;;
esac

case ${target} in
i[34567]86-*-linux* | x86_64-*-linux*)
	tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386"
	;;
i[34567]86-*-* | x86_64-*-*)
	tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386"
	;;
powerpc*-*-* | rs6000-*-*)
	tm_file="${tm_file} rs6000/option-defaults.h"
esac

if [ "$target_has_targetcm" = "no" ]; then
  c_target_objs="$c_target_objs default-c.o"
  cxx_target_objs="$cxx_target_objs default-c.o"
fi

if [ "$common_out_file" = "" ]; then
  if [ "$target_has_targetm_common" = "yes" ]; then
    common_out_file="$cpu_type/$cpu_type-common.c"
  else
    common_out_file="default-common.c"
  fi
fi

# Support for --with-cpu and related options (and a few unrelated options,
# too).
case ${with_cpu} in
  yes | no)
    echo "--with-cpu must be passed a value" 1>&2
    exit 1
    ;;
esac

# Set arch and cpu from ${target} and ${target_noncanonical}.  Set cpu
# to generic if there is no processor scheduler model for the target.
arch=
cpu=
arch_without_sse2=no
arch_without_64bit=no
case ${target} in
  i386-*-freebsd*)
    if test $fbsd_major -ge 6; then
      arch=i486
    else
      arch=i386
    fi
    cpu=generic
    arch_without_sse2=yes
    arch_without_64bit=yes
    ;;
  i386-*-*)
    arch=i386
    cpu=i386
    arch_without_sse2=yes
    arch_without_64bit=yes
    ;;
  i486-*-*)
    arch=i486
    cpu=i486
    arch_without_sse2=yes
    arch_without_64bit=yes
    ;;
  i586-*-*)
    arch_without_sse2=yes
    arch_without_64bit=yes
    case ${target_noncanonical} in
      k6_2-*)
	arch=k6-2
	cpu=k6-2
	;;
      k6_3-*)
	arch=k6-3
	cpu=k6-3
	;;
      k6-*)
	arch=k6
	cpu=k6
	;;
      pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
	arch=pentium-mmx
	cpu=pentium-mmx
	;;
      *)
	arch=pentium
	cpu=pentium
	;;
    esac
    ;;
  i686-*-* | i786-*-*)
    case ${target_noncanonical} in
      bdver2-*)
        arch=bdver2
        cpu=bdver2
        ;;
      bdver1-*)
	arch=bdver1
	cpu=bdver1
	;;
      btver1-*)
	arch=btver1
	cpu=btver1
	;;
      btver2-*)
	arch=btver2
	cpu=btver2
	;;
      amdfam10-*|barcelona-*)
	arch=amdfam10
	cpu=amdfam10
	;;
      k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
	arch=k8-sse3
	cpu=k8-sse3
	;;
      k8-*|opteron-*|athlon64-*|athlon_fx-*)
	arch=k8
	cpu=k8
	;;
      athlon_xp-*|athlon_mp-*|athlon_4-*)
	arch=athlon-4
	cpu=athlon-4
	arch_without_sse2=yes
	arch_without_64bit=yes
	;;
      athlon_tbird-*|athlon-*)
	arch=athlon
	cpu=athlon
	arch_without_sse2=yes
	;;
      geode-*)
	arch=geode
	cpu=geode
	arch_without_sse2=yes
	;;
      pentium2-*)
	arch=pentium2
	cpu=pentium2
	arch_without_sse2=yes
	;;
      pentium3-*|pentium3m-*)
	arch=pentium3
	cpu=pentium3
	arch_without_sse2=yes
	;;
      pentium4-*|pentium4m-*)
	arch=pentium4
	cpu=pentium4
	;;
      prescott-*)
	arch=prescott
	cpu=prescott
	;;
      nocona-*)
	arch=nocona
	cpu=nocona
	;;
      atom-*)
	arch=atom
	cpu=atom
	;;
      core2-*)
	arch=core2
	cpu=core2
	;;
      corei7-*)
	arch=corei7
	cpu=corei7
	;;
      corei7_avx-*)
	arch=corei7-avx
	cpu=corei7-avx
	;;
      pentium_m-*)
	arch=pentium-m
	cpu=pentium-m
	;;
      pentiumpro-*)
	arch=pentiumpro
	cpu=pentiumpro
	arch_without_sse2=yes
	;;
      *)
	arch=pentiumpro
	cpu=generic
	arch_without_sse2=yes
	arch_without_64bit=yes
	;;
    esac
    ;;
  x86_64-*-*)
    case ${target_noncanonical} in
      bdver2-*)
        arch=bdver2
        cpu=bdver2
        ;;
      bdver1-*)
	arch=bdver1
	cpu=bdver1
	;;
      btver1-*)
	arch=btver1
	cpu=btver1
	;;
      btver2-*)
	arch=btver2
	cpu=btver2
	;;
      amdfam10-*|barcelona-*)
	arch=amdfam10
	cpu=amdfam10
	;;
      k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
	arch=k8-sse3
	cpu=k8-sse3
	;;
      k8-*|opteron-*|athlon_64-*)
	arch=k8
	cpu=k8
	;;
      nocona-*)
	arch=nocona
	cpu=nocona
	;;
      atom-*)
	arch=atom
	cpu=atom
	;;
      core2-*)
	arch=core2
	cpu=core2
	;;
      corei7-*)
	arch=corei7
	cpu=corei7
	;;
      *)
	arch=x86-64
	cpu=generic
	;;
    esac
    ;;
esac

# If there is no $with_cpu option, try to infer one from ${target}.
# This block sets nothing except for with_cpu.
if test x$with_cpu = x ; then
  case ${target} in
    i[34567]86-*-*|x86_64-*-*)
      with_cpu=$cpu
      ;;
    alphaev6[78]*-*-*)
      with_cpu=ev67
      ;;
    alphaev6*-*-*)
      with_cpu=ev6
      ;;
    alphapca56*-*-*)
      with_cpu=pca56
      ;;
    alphaev56*-*-*)
      with_cpu=ev56
      ;;
    alphaev5*-*-*)
      with_cpu=ev5
      ;;
    frv-*-*linux* | frv400-*-*linux*)
      with_cpu=fr400
      ;;
    frv550-*-*linux*)
      with_cpu=fr550
      ;;
    m68k*-*-*)
      case "$with_arch" in
	"cf")
	  with_cpu=${default_cf_cpu}
	  ;;
	"" | "m68k")
	  with_cpu=m${default_m68k_cpu}
	  ;;
      esac
      ;;
    mips*-*-vxworks)
      with_arch=mips2
      ;;
    powerpc*-*-*spe*)
      if test x$enable_e500_double = xyes; then
         with_cpu=8548
      else
         with_cpu=8540
      fi       
      ;;
    sparc-leon*-*)
      with_cpu=v8;
      ;;
    sparc*-*-*)
      with_cpu="`echo ${target} | sed 's/-.*$//'`"
      ;;
  esac

  # Avoid overriding --with-cpu-32 and --with-cpu-64 values.
  case ${target} in
    i[34567]86-*-*|x86_64-*-*)
      if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then
	if test x$with_cpu_32 = x; then
	  with_cpu_32=$with_cpu
	fi
	if test x$with_cpu_64 = x; then
	  with_cpu_64=$with_cpu
	fi
        with_cpu=
      fi
      ;;
  esac
fi

# Support for --with-arch and related options (and a few unrelated options,
# too).
case ${with_arch} in
  yes | no)
    echo "--with-arch must be passed a value" 1>&2
    exit 1
    ;;
esac

# If there is no $with_arch option, try to infer one from ${target}.
# This block sets nothing except for with_arch.
if test x$with_arch = x ; then
  case ${target} in
    i[34567]86-*-darwin*|x86_64-*-darwin*)
      # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
      # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
      ;;
    i[34567]86-*-*)
      # --with-fpmath sets the default ISA to SSE2, which is the same
      # ISA supported by Pentium 4.
      if test x$with_fpmath = x || test $arch_without_sse2 = no; then
	with_arch=$arch
      else
	with_arch=pentium4
      fi
      ;;
    x86_64-*-*)
      with_arch=$arch
      ;;
  esac

  # Avoid overriding --with-arch-32 and --with-arch-64 values.
  case ${target} in
    i[34567]86-*-darwin*|x86_64-*-darwin*)
      # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
      # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
      ;;
    i[34567]86-*-*|x86_64-*-*)
      if test x$with_arch_32 != x || test x$with_arch_64 != x; then
	if test x$with_arch_32 = x; then
	  with_arch_32=$with_arch
	fi
	if test x$with_arch_64 = x; then
	  if test $arch_without_64bit = yes; then
	    # Set the default 64bit arch to x86-64 if the default arch
	    # doesn't support 64bit.
	    with_arch_64=x86-64
	  else
	    with_arch_64=$with_arch
	  fi
	fi
	with_arch=
      elif test $arch_without_64bit$need_64bit_isa = yesyes; then
	# Set the default 64bit arch to x86-64 if the default arch
	# doesn't support 64bit and we need 64bit ISA.
	with_arch_32=$with_arch
	with_arch_64=x86-64
	with_arch=
      fi
      ;;
  esac
fi

# Support --with-fpmath.
if test x$with_fpmath != x; then
  case ${target} in
    i[34567]86-*-* | x86_64-*-*)
      case ${with_fpmath} in
      avx)
	tm_file="${tm_file} i386/avxmath.h"
	;;
      sse)
	tm_file="${tm_file} i386/ssemath.h"
	;;
      *)
	echo "Invalid --with-fpmath=$with_fpmath" 1>&2
	exit 1
	;;
      esac
      ;;
    *)
      echo "--with-fpmath isn't supported for $target." 1>&2
      exit 1
      ;;
  esac
fi

# Similarly for --with-schedule.
if test x$with_schedule = x; then
	case ${target} in
	hppa1*)
		# Override default PA8000 scheduling model.
		with_schedule=7100LC
		;;
	esac
fi

# Validate and mark as valid any --with options supported
# by this target.  In order to use a particular --with option
# you must list it in supported_defaults; validating the value
# is optional.  This case statement should set nothing besides
# supported_defaults.

supported_defaults=
case "${target}" in
	alpha*-*-*)
		supported_defaults="cpu tune"
		for which in cpu tune; do
			eval "val=\$with_$which"
			case "$val" in
			"" \
			| ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
			| pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
			| 21264a)
				;;
			*)
				echo "Unknown CPU used in --with-$which=$val" 1>&2
				exit 1
				;;
			esac
		done
		;;

	arm*-*-*)
		supported_defaults="arch cpu float tune fpu abi mode tls"
		for which in cpu tune; do
			# See if it matches any of the entries in arm-cores.def
			eval "val=\$with_$which"
			if [ x"$val" = x ] \
			    || grep "^ARM_CORE(\"$val\"," \
				    ${srcdir}/config/arm/arm-cores.def \
				    > /dev/null; then
			  # Ok
			  new_val=`grep "^ARM_CORE(\"$val\"," \
				${srcdir}/config/arm/arm-cores.def | \
				sed -e 's/^[^,]*,[ 	]*//' | \
				sed -e 's/,.*$//'`
			  eval "target_${which}_cname=$new_val"
			echo "For $val real value is $new_val"
			  true
			else
			  echo "Unknown CPU used in --with-$which=$val" 1>&2
			  exit 1
			fi
		done

		case "$with_arch" in
		"" \
		| armv[23456] | armv2a | armv3m | armv4t | armv5t \
		| armv5te | armv6j |armv6k | armv6z | armv6zk | armv6-m \
		| armv7 | armv7-a | armv7-r | armv7-m | armv8-a \
		| iwmmxt | ep9312)
			# OK
			;;
		*)
			echo "Unknown arch used in --with-arch=$with_arch" 1>&2
			exit 1
			;;
		esac

		case "$with_float" in
		"" \
		| soft | hard | softfp)
			# OK
			;;
		*)
			echo "Unknown floating point type used in --with-float=$with_float" 1>&2
			exit 1
			;;
		esac

		case "$with_fpu" in
		"" \
		| vfp | vfp3 | vfpv3 \
		| vfpv3-fp16 | vfpv3-d16 | vfpv3-d16-fp16 | vfpv3xd \
		| vfpv3xd-fp16 | neon | neon-fp16 | vfpv4 | vfpv4-d16 \
		| fpv4-sp-d16 | neon-vfpv4 | fp-arm-v8 | neon-fp-armv8 \
                | crypto-neon-fp-armv8)
			# OK
			;;
		*)
			echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
			exit 1
			;;
		esac

		case "$with_abi" in
		"" \
		| apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux )
			#OK
			;;
		*)
			echo "Unknown ABI used in --with-abi=$with_abi"
			exit 1
			;;
		esac

		case "$with_mode" in
		"" \
		| arm | thumb )
			#OK
			;;
		*)
			echo "Unknown mode used in --with-mode=$with_mode"
			exit 1
			;;
		esac

		case "$with_tls" in
		"" \
		| gnu | gnu2)
			# OK
			;;
		*)
			echo "Unknown TLS method used in --with-tls=$with_tls" 1>&2
			exit 1
			;;
		esac

		if test "x$with_arch" != x && test "x$with_cpu" != x; then
			echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
		fi
		;;

	fr*-*-*linux*)
		supported_defaults=cpu
		case "$with_cpu" in
		fr400) ;;
		fr550) ;;
		*)
			echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
			exit 1
			;;
		esac
		;;

	fido-*-* | m68k*-*-*)
		supported_defaults="arch cpu"
		case "$with_arch" in
		"" | "m68k"| "cf")
			m68k_arch_family="$with_arch"
			;;
		*)
			echo "Invalid --with-arch=$with_arch" 1>&2
			exit 1
			;;
		esac

		# We always have a $with_cpu setting here.
		case "$with_cpu" in
		"m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
			m68k_cpu_ident=$with_cpu
			;;
		"m68020-40")
			m68k_cpu_ident=m68020
			tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
			;;
		"m68020-60")
			m68k_cpu_ident=m68020
			tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
			;;
		*)
			# We need the C identifier rather than the string.
			m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
			   'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
			    $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
				 ${srcdir}/config/m68k/m68k-devices.def`
			if [ x"$m68k_cpu_ident" = x ] ; then
				echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
				exit 1
			fi
			with_cpu="mcpu=$with_cpu"
			;;
		esac
		;;

	hppa*-*-*)
		supported_defaults="arch schedule"

		case "$with_arch" in
		"" | 1.0 | 1.1 | 2.0)
			# OK
			;;
		*)
			echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
			exit 1
			;;
		esac

		case "$with_schedule" in
		"" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
			# OK
			;;
		*)
			echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
			exit 1
			;;
		esac
		;;

	i[34567]86-*-* | x86_64-*-*)
		supported_defaults="abi arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
		for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
			eval "val=\$with_$which"
			case ${val} in
			i386 | i486 \
			| i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
			| c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
			| pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
			| athlon-4 | athlon-xp | athlon-mp | geode \
			| prescott | pentium-m | pentium4m | pentium3m)
				case "${target}" in
				  x86_64-*-*)
				      case "x$which" in
					*_32)
						;;
					*)
						echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
						exit 1
						;;
				      esac
				      ;;
				esac
				# OK
				;;
			"" | x86-64 | generic | native \
			| k8 | k8-sse3 | athlon64 | athlon64-sse3 | opteron \
			| opteron-sse3 | athlon-fx | bdver2 | bdver1 | btver2 | btver1 \
			| amdfam10 | barcelona | nocona | core2 | corei7 \
			| corei7-avx | core-avx-i | core-avx2 | atom)
				# OK
				;;
			*)
				echo "Unknown CPU given in --with-$which=$val." 1>&2
				exit 1
				;;
			esac
		done
		;;

	mips*-*-*)
		supported_defaults="abi arch arch_32 arch_64 float tune tune_32 tune_64 divide llsc mips-plt synci"

		case ${with_float} in
		"" | soft | hard)
			# OK
			;;
		*)
			echo "Unknown floating point type used in --with-float=$with_float" 1>&2
			exit 1
			;;
		esac

		case ${with_abi} in
		"" | 32 | o64 | n32 | 64 | eabi)
			# OK
			;;
		*)
			echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
			exit 1
			;;
		esac

		case ${with_divide} in
		"" | breaks | traps)
			# OK
			;;
		*)
			echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
			exit 1
			;;
		esac

		case ${with_llsc} in
		yes)
			with_llsc=llsc
			;;
		no)
			with_llsc="no-llsc"
			;;
		"")
			# OK
			;;
		*)
			echo "Unknown llsc type used in --with-llsc" 1>&2
			exit 1
			;;
		esac

		case ${with_mips_plt} in
		yes)
			with_mips_plt=plt
			;;
		no)
			with_mips_plt=no-plt
			;;
		"")
			;;
		*)
			echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2
			exit 1
			;;
		esac

		case ${with_synci} in
		yes)
			with_synci=synci
			;;
		no)
			with_synci=no-synci
			;;
		"")
			;;
		*)
			echo "Unknown synci type used in --with-synci" 1>&2
			exit 1
			;;
		esac
		;;

	powerpc*-*-* | rs6000-*-*)
		supported_defaults="cpu cpu_32 cpu_64 float tune tune_32 tune_64"

		for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
			eval "val=\$with_$which"
			case ${val} in
			default32 | default64)
				case $which in
				cpu | tune)
					;;
				*)
					echo "$val only valid for --with-cpu and --with-tune." 1>&2
					exit 1
					;;
				esac
				with_which="with_$which"
				eval $with_which=
				;;
			405cr)
				tm_defines="${tm_defines} CONFIG_PPC405CR"
				eval "with_$which=405"
				;;
			"" | common \
			| power | power[234567] | power6x | powerpc | powerpc64 \
			| rios | rios1 | rios2 | rsc | rsc1 | rs64a \
			| 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
			| 476 | 476fp | 505 | 601 | 602 | 603 | 603e | ec603e \
			| 604 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
			| a2 | e300c[23] | 854[08] | e500mc | e500mc64 | e5500 | e6500 \
			| titan | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
				# OK
				;;
			*)
				echo "Unknown cpu used in --with-$which=$val." 1>&2
				exit 1
				;;
			esac
		done
		;;

	s390*-*-*)
		supported_defaults="arch mode tune"

		for which in arch tune; do
			eval "val=\$with_$which"
			case ${val} in
			"" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10 | z196 | zEC12)
				# OK
				;;
			*)
				echo "Unknown cpu used in --with-$which=$val." 1>&2
				exit 1
				;;
			esac
		done

		case ${with_mode} in
		"" | esa | zarch)
			# OK
			;;
		*)
			echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
			exit 1
			;;
		esac
		;;

	sh[123456ble]-*-* | sh-*-*)
		supported_defaults="cpu"
		case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
		"" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
			# OK
			;;
		m2a | m2a-single | m2a-single-only | m2a-nofpu)
			;;
		m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
		        ;;
		*)
			echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
			echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
			echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
			echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
			exit 1
			;;
		esac
		;;
	sparc*-*-*)
		supported_defaults="cpu float tune"

		for which in cpu tune; do
			eval "val=\$with_$which"
			case ${val} in
			"" | sparc | sparcv9 | sparc64 \
			| v7 | cypress \
			| v8 | supersparc | hypersparc | leon \
			| sparclite | f930 | f934 | sparclite86x \
			| sparclet | tsc701 \
			| v9 | ultrasparc | ultrasparc3 | niagara | niagara2 \
			| niagara3 | niagara4)
				# OK
				;;
			*)
				echo "Unknown cpu used in --with-$which=$val" 1>&2
				exit 1
				;;
			esac
		done

		case ${with_float} in
		"" | soft | hard)
			# OK
			;;
		*)
			echo "Unknown floating point type used in --with-float=$with_float" 1>&2
			exit 1
			;;
		esac
		;;

	spu-*-*)
		supported_defaults="arch tune"

		for which in arch tune; do
			eval "val=\$with_$which"
			case ${val} in
			"" | cell | celledp)
				# OK
				;;
			*)
				echo "Unknown cpu used in --with-$which=$val." 1>&2
				exit 1
				;;
			esac
		done
		;;

	tic6x-*-*)
		supported_defaults="arch"

		case ${with_arch} in
		"" | c62x | c64x | c64x+ | c67x | c67x+ | c674x)
			# OK
			;;
		*)
			echo "Unknown arch used in --with-arch=$with_arch." 1>&2
			exit 1
			;;
		esac
		;;

	v850*-*-*)
		supported_defaults=cpu
		case ${with_cpu} in
		"" | v850e | v850e1 | v850e2 | v850es | v850e2v3)
			# OK
			;;
		*)
			echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
			exit 1
			;;
		esac
		;;
esac

# Set some miscellaneous flags for particular targets.
target_cpu_default2=
case ${target} in
	arm*-*-*)
		if test x$target_cpu_cname = x
		then
			target_cpu_default2=TARGET_CPU_generic
		else
			target_cpu_default2=TARGET_CPU_$target_cpu_cname
		fi
		;;

	hppa*-*-*)
		target_cpu_default2="MASK_BIG_SWITCH"
		if test x$gas = xyes
		then
			target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
		fi
		;;

	fido*-*-* | m68k*-*-*)
		target_cpu_default2=$m68k_cpu_ident
		tmake_file="m68k/t-opts $tmake_file"
		if [ x"$m68k_arch_family" != x ]; then
		        tmake_file="m68k/t-$m68k_arch_family $tmake_file"
		fi
		;;

	i[34567]86-*-darwin* | x86_64-*-darwin*)
		;;
	i[34567]86-*-linux* | x86_64-*-linux* | \
	  i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu | \
	  i[34567]86-*-gnu*)
		;;
	i[34567]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*)
		;;
	i[34567]86-*-cygwin* | i[34567]86-*-mingw* | x86_64-*-mingw*)
		;;
	i[34567]86-*-freebsd* | x86_64-*-freebsd*)
		;;
	ia64*-*-linux*)
		;;

	mips*-*-*)
		if test x$gnu_ld = xyes
		then
			target_cpu_default2="MASK_SPLIT_ADDRESSES"
		fi
		case ${target} in
			mips*el-*-*)
				tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
				;;
		esac
		tmake_file="mips/t-mips $tmake_file"
		;;

	powerpc*-*-* | rs6000-*-*)
		# FIXME: The PowerPC port uses the value set at compile time,
		# although it's only cosmetic.
		if test "x$with_cpu" != x
		then
			target_cpu_default2="\\\"$with_cpu\\\""
		fi
		out_file=rs6000/rs6000.c
		c_target_objs="${c_target_objs} rs6000-c.o"
		cxx_target_objs="${cxx_target_objs} rs6000-c.o"
		tmake_file="rs6000/t-rs6000 ${tmake_file}"
		;;

	sh[123456ble]*-*-* | sh-*-*)
		c_target_objs="${c_target_objs} sh-c.o"
		cxx_target_objs="${cxx_target_objs} sh-c.o"
		;;

	sparc-leon*-*)
		if test x$with_tune = x ; then
		  with_tune=leon;
		fi

		# The SPARC port checks this value at compile-time.
		target_cpu_default2="TARGET_CPU_$with_cpu"
		;;

	sparc*-*-*)
		# Some standard aliases.
		case x$with_cpu in
		xsparc)
			with_cpu=v7
			;;
		xsparcv9 | xsparc64)
			with_cpu=v9
			;;
		esac

		# The SPARC port checks this value at compile-time.
		target_cpu_default2="TARGET_CPU_$with_cpu"
		;;

	v850*-*-*)
		case "x$with_cpu" in
		x)
			;;
		xv850e | xv850e1 | xv850e2 | xv850e2v3)
			target_cpu_default2="TARGET_CPU_$with_cpu"
			;;
		xv850es)
			target_cpu_default2="TARGET_CPU_v850e1"
			;;
		esac
		;;
esac

t=
all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc mips-plt synci tls"
for option in $all_defaults
do
	eval "val=\$with_"`echo $option | sed s/-/_/g`
	if test -n "$val"; then
		case " $supported_defaults " in
		*" $option "*)
			;;
		*)
			echo "This target does not support --with-$option." 2>&1
			echo "Valid --with options are: $supported_defaults" 2>&1
			exit 1
			;;
		esac

		if test "x$t" = x
		then
			t="{ \"$option\", \"$val\" }"
		else
			t="${t}, { \"$option\", \"$val\" }"
		fi
	fi
done

if test "x$t" = x
then
	configure_default_options="{ { NULL, NULL} }"
else
	configure_default_options="{ ${t} }"
fi

if test "$target_cpu_default2" != ""
then
	if test "$target_cpu_default" != ""
	then
		target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
	else
		target_cpu_default=$target_cpu_default2
	fi
fi