From 237df3fa4a1d939e6fd1af0c3e5029a25a137310 Mon Sep 17 00:00:00 2001 From: Tristan Gingold Date: Mon, 2 Dec 2013 10:54:47 +0100 Subject: Add generated files --- etc/configure.info | 2773 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2773 insertions(+) create mode 100644 etc/configure.info (limited to 'etc/configure.info') diff --git a/etc/configure.info b/etc/configure.info new file mode 100644 index 0000000000..cee206aa6a --- /dev/null +++ b/etc/configure.info @@ -0,0 +1,2773 @@ +This is configure.info, produced by makeinfo version 4.8 from +./configure.texi. + +INFO-DIR-SECTION GNU admin +START-INFO-DIR-ENTRY +* configure: (configure). The GNU configure and build system +END-INFO-DIR-ENTRY + + This file documents the GNU configure and build system. + + Copyright (C) 1998 Cygnus Solutions. + + Permission is granted to make and distribute verbatim copies of this +manual provided the copyright notice and this permission notice are +preserved on all copies. + + Permission is granted to copy and distribute modified versions of +this manual under the conditions for verbatim copying, provided that +the entire resulting derived work is distributed under the terms of a +permission notice identical to this one. + + Permission is granted to copy and distribute translations of this +manual into another language, under the above conditions for modified +versions, except that this permission notice may be stated in a +translation approved by the Foundation. + + +File: configure.info, Node: Top, Next: Introduction, Up: (dir) + +GNU configure and build system +****************************** + +The GNU configure and build system. + +* Menu: + +* Introduction:: Introduction. +* Getting Started:: Getting Started. +* Files:: Files. +* Configuration Names:: Configuration Names. +* Cross Compilation Tools:: Cross Compilation Tools. +* Canadian Cross:: Canadian Cross. +* Cygnus Configure:: Cygnus Configure. +* Multilibs:: Multilibs. +* FAQ:: Frequently Asked Questions. +* Index:: Index. + + +File: configure.info, Node: Introduction, Next: Getting Started, Prev: Top, Up: Top + +1 Introduction +************** + +This document describes the GNU configure and build systems. It +describes how autoconf, automake, libtool, and make fit together. It +also includes a discussion of the older Cygnus configure system. + + This document does not describe in detail how to use each of the +tools; see the respective manuals for that. Instead, it describes +which files the developer must write, which files are machine generated +and how they are generated, and where certain common problems should be +addressed. + + This document draws on several sources, including the autoconf +manual by David MacKenzie (*note autoconf overview: (autoconf)Top.), +the automake manual by David MacKenzie and Tom Tromey (*note automake +overview: (automake)Top.), the libtool manual by Gordon Matzigkeit +(*note libtool overview: (libtool)Top.), and the Cygnus configure +manual by K. Richard Pixley. + +* Menu: + +* Goals:: Goals. +* Tools:: The tools. +* History:: History. +* Building:: Building. + + +File: configure.info, Node: Goals, Next: Tools, Up: Introduction + +1.1 Goals +========= + +The GNU configure and build system has two main goals. + + The first is to simplify the development of portable programs. The +system permits the developer to concentrate on writing the program, +simplifying many details of portability across Unix and even Windows +systems, and permitting the developer to describe how to build the +program using simple rules rather than complex Makefiles. + + The second is to simplify the building of programs distributed as +source code. All programs are built using a simple, standardized, two +step process. The program builder need not install any special tools in +order to build the program. + + +File: configure.info, Node: Tools, Next: History, Prev: Goals, Up: Introduction + +1.2 Tools +========= + +The GNU configure and build system is comprised of several different +tools. Program developers must build and install all of these tools. + + People who just want to build programs from distributed sources +normally do not need any special tools beyond a Unix shell, a make +program, and a C compiler. + +autoconf + provides a general portability framework, based on testing the + features of the host system at build time. + +automake + a system for describing how to build a program, permitting the + developer to write a simplified `Makefile'. + +libtool + a standardized approach to building shared libraries. + +gettext + provides a framework for translation of text messages into other + languages; not really discussed in this document. + +m4 + autoconf requires the GNU version of m4; the standard Unix m4 does + not suffice. + +perl + automake requires perl. + + +File: configure.info, Node: History, Next: Building, Prev: Tools, Up: Introduction + +1.3 History +=========== + +This is a very brief and probably inaccurate history. + + As the number of Unix variants increased during the 1980s, it became +harder to write programs which could run on all variants. While it was +often possible to use `#ifdef' to identify particular systems, +developers frequently did not have access to every system, and the +characteristics of some systems changed from version to version. + + By 1992, at least three different approaches had been developed: + * The Metaconfig program, by Larry Wall, Harlan Stenn, and Raphael + Manfredi. + + * The Cygnus configure script, by K. Richard Pixley, and the gcc + configure script, by Richard Stallman. These use essentially the + same approach, and the developers communicated regularly. + + * The autoconf program, by David MacKenzie. + + The Metaconfig program is still used for Perl and a few other +programs. It is part of the Dist package. I do not know if it is +being developed. + + In 1994, David MacKenzie and others modified autoconf to incorporate +all the features of Cygnus configure. Since then, there has been a +slow but steady conversion of GNU programs from Cygnus configure to +autoconf. gcc has been converted, eliminating the gcc configure script. + + GNU autoconf was regularly maintained until late 1996. As of this +writing in June, 1998, it has no public maintainer. + + Most programs are built using the make program, which requires the +developer to write Makefiles describing how to build the programs. +Since most programs are built in pretty much the same way, this led to a +lot of duplication. + + The X Window system is built using the imake tool, which uses a +database of rules to eliminate the duplication. However, building a +tool which was developed using imake requires that the builder have +imake installed, violating one of the goals of the GNU system. + + The new BSD make provides a standard library of Makefile fragments, +which permits developers to write very simple Makefiles. However, this +requires that the builder install the new BSD make program. + + In 1994, David MacKenzie wrote the first version of automake, which +permitted writing a simple build description which was converted into a +Makefile which could be used by the standard make program. In 1995, Tom +Tromey completely rewrote automake in Perl, and he continues to enhance +it. + + Various free packages built libraries, and by around 1995 several +included support to build shared libraries on various platforms. +However, there was no consistent approach. In early 1996, Gordon +Matzigkeit began working on libtool, which provided a standardized +approach to building shared libraries. This was integrated into +automake from the start. + + The development of automake and libtool was driven by the GNITS +project, a group of GNU maintainers who designed standardized tools to +help meet the GNU coding standards. + + +File: configure.info, Node: Building, Prev: History, Up: Introduction + +1.4 Building +============ + +Most readers of this document should already know how to build a tool by +running `configure' and `make'. This section may serve as a quick +introduction or reminder. + + Building a tool is normally as simple as running `configure' +followed by `make'. You should normally run `configure' from an empty +directory, using some path to refer to the `configure' script in the +source directory. The directory in which you run `configure' is called +the "object directory". + + In order to use a object directory which is different from the source +directory, you must be using the GNU version of `make', which has the +required `VPATH' support. Despite this restriction, using a different +object directory is highly recommended: + * It keeps the files generated during the build from cluttering up + your sources. + + * It permits you to remove the built files by simply removing the + entire build directory. + + * It permits you to build from the same sources with several sets of + configure options simultaneously. + + If you don't have GNU `make', you will have to run `configure' in +the source directory. All GNU packages should support this; in +particular, GNU packages should not assume the presence of GNU `make'. + + After running `configure', you can build the tools by running `make'. + + To install the tools, run `make install'. Installing the tools will +copy the programs and any required support files to the "installation +directory". The location of the installation directory is controlled +by `configure' options, as described below. + + In the Cygnus tree at present, the info files are built and +installed as a separate step. To build them, run `make info'. To +install them, run `make install-info'. The equivalent html files are +also built and installed in a separate step. To build the html files, +run `make html'. To install the html files run `make install-html'. + + All `configure' scripts support a wide variety of options. The most +interesting ones are `--with' and `--enable' options which are +generally specific to particular tools. You can usually use the +`--help' option to get a list of interesting options for a particular +configure script. + + The only generic options you are likely to use are the `--prefix' +and `--exec-prefix' options. These options are used to specify the +installation directory. + + The directory named by the `--prefix' option will hold machine +independent files such as info files. + + The directory named by the `--exec-prefix' option, which is normally +a subdirectory of the `--prefix' directory, will hold machine dependent +files such as executables. + + The default for `--prefix' is `/usr/local'. The default for +`--exec-prefix' is the value used for `--prefix'. + + The convention used in Cygnus releases is to use a `--prefix' option +of `/usr/cygnus/RELEASE', where RELEASE is the name of the release, and +to use a `--exec-prefix' option of `/usr/cygnus/RELEASE/H-HOST', where +HOST is the configuration name of the host system (*note Configuration +Names::). + + Do not use either the source or the object directory as the +installation directory. That will just lead to confusion. + + +File: configure.info, Node: Getting Started, Next: Files, Prev: Introduction, Up: Top + +2 Getting Started +***************** + +To start using the GNU configure and build system with your software +package, you must write three files, and you must run some tools to +manually generate additional files. + +* Menu: + +* Write configure.in:: Write configure.in. +* Write Makefile.am:: Write Makefile.am. +* Write acconfig.h:: Write acconfig.h. +* Generate files:: Generate files. +* Getting Started Example:: Example. + + +File: configure.info, Node: Write configure.in, Next: Write Makefile.am, Up: Getting Started + +2.1 Write configure.in +====================== + +You must first write the file `configure.in'. This is an autoconf +input file, and the autoconf manual describes in detail what this file +should look like. + + You will write tests in your `configure.in' file to check for +conditions that may change from one system to another, such as the +presence of particular header files or functions. + + For example, not all systems support the `gettimeofday' function. +If you want to use the `gettimeofday' function when it is available, +and to use some other function when it is not, you would check for this +by putting `AC_CHECK_FUNCS(gettimeofday)' in `configure.in'. + + When the configure script is run at build time, this will arrange to +define the preprocessor macro `HAVE_GETTIMEOFDAY' to the value 1 if the +`gettimeofday' function is available, and to not define the macro at +all if the function is not available. Your code can then use `#ifdef' +to test whether it is safe to call `gettimeofday'. + + If you have an existing body of code, the `autoscan' program may +help identify potential portability problems, and hence configure tests +that you will want to use. *Note Invoking autoscan: (autoconf)Invoking +autoscan. + + Another handy tool for an existing body of code is `ifnames'. This +will show you all the preprocessor conditionals that the code already +uses. *Note Invoking ifnames: (autoconf)Invoking ifnames. + + Besides the portability tests which are specific to your particular +package, every `configure.in' file should contain the following macros. + +`AC_INIT' + This macro takes a single argument, which is the name of a file in + your package. For example, `AC_INIT(foo.c)'. + +`AC_PREREQ(VERSION)' + This macro is optional. It may be used to indicate the version of + `autoconf' that you are using. This will prevent users from + running an earlier version of `autoconf' and perhaps getting an + invalid `configure' script. For example, `AC_PREREQ(2.12)'. + +`AM_INIT_AUTOMAKE' + This macro takes two arguments: the name of the package, and a + version number. For example, `AM_INIT_AUTOMAKE(foo, 1.0)'. (This + macro is not needed if you are not using automake). + +`AM_CONFIG_HEADER' + This macro names the header file which will hold the preprocessor + macro definitions at run time. Normally this should be + `config.h'. Your sources would then use `#include "config.h"' to + include it. + + This macro may optionally name the input file for that header + file; by default, this is `config.h.in', but that file name works + poorly on DOS filesystems. Therefore, it is often better to name + it explicitly as `config.in'. + + This is what you should normally put in `configure.in': + AM_CONFIG_HEADER(config.h:config.in) + + (If you are not using automake, use `AC_CONFIG_HEADER' rather than + `AM_CONFIG_HEADER'). + +`AM_MAINTAINER_MODE' + This macro always appears in Cygnus configure scripts. Other + programs may or may not use it. + + If this macro is used, the `--enable-maintainer-mode' option is + required to enable automatic rebuilding of generated files used by + the configure system. This of course requires that developers be + aware of, and use, that option. + + If this macro is not used, then the generated files will always be + rebuilt automatically. This will cause problems if the wrong + versions of autoconf, automake, or others are in the builder's + `PATH'. + + (If you are not using automake, you do not need to use this macro). + +`AC_EXEEXT' + Either this macro or `AM_EXEEXT' always appears in Cygnus configure + files. Other programs may or may not use one of them. + + This macro looks for the executable suffix used on the host + system. On Unix systems, this is the empty string. On Windows + systems, this is `.exe'. This macro directs automake to use the + executable suffix as appropriate when creating programs. This + macro does not take any arguments. + + The `AC_EXEEXT' form is new, and is part of a Cygnus patch to + autoconf to support compiling with Visual C++. Older programs use + `AM_EXEEXT' instead. + + (Programs which do not use automake use neither `AC_EXEEXT' nor + `AM_EXEEXT'). + +`AC_PROG_CC' + If you are writing C code, you will normally want to use this + macro. It locates the C compiler to use. It does not take any + arguments. + + However, if this `configure.in' file is for a library which is to + be compiled by a cross compiler which may not fully work, then you + will not want to use `AC_PROG_CC'. Instead, you will want to use a + variant which does not call the macro `AC_PROG_CC_WORKS'. Examples + can be found in various `configure.in' files for libraries that are + compiled with cross compilers, such as libiberty or libgloss. + This is essentially a bug in autoconf, and there will probably be + a better workaround at some point. + +`AC_PROG_CXX' + If you are writing C++ code, you will want to use this macro. It + locates the C++ compiler to use. It does not take any arguments. + The same cross compiler comments apply as for `AC_PROG_CC'. + +`AM_PROG_LIBTOOL' + If you want to build libraries, and you want to permit them to be + shared, or you want to link against libraries which were built + using libtool, then you will need this macro. This macro is + required in order to use libtool. + + By default, this will cause all libraries to be built as shared + libraries. To prevent this-to change the default-use + `AM_DISABLE_SHARED' before `AM_PROG_LIBTOOL'. The configure + options `--enable-shared' and `--disable-shared' may be used to + override the default at build time. + +`AC_DEFINE(_GNU_SOURCE)' + GNU packages should normally include this line before any other + feature tests. This defines the macro `_GNU_SOURCE' when + compiling, which directs the libc header files to provide the + standard GNU system interfaces including all GNU extensions. If + this macro is not defined, certain GNU extensions may not be + available. + +`AC_OUTPUT' + This macro takes a list of file names which the configure process + should produce. This is normally a list of one or more `Makefile' + files in different directories. If your package lives entirely in + a single directory, you would use simply `AC_OUTPUT(Makefile)'. + If you also have, for example, a `lib' subdirectory, you would use + `AC_OUTPUT(Makefile lib/Makefile)'. + + If you want to use locally defined macros in your `configure.in' +file, then you will need to write a `acinclude.m4' file which defines +them (if not using automake, this file is called `aclocal.m4'). +Alternatively, you can put separate macros in an `m4' subdirectory, and +put `ACLOCAL_AMFLAGS = -I m4' in your `Makefile.am' file so that the +`aclocal' program will be able to find them. + + The different macro prefixes indicate which tool defines the macro. +Macros which start with `AC_' are part of autoconf. Macros which start +with `AM_' are provided by automake or libtool. + + +File: configure.info, Node: Write Makefile.am, Next: Write acconfig.h, Prev: Write configure.in, Up: Getting Started + +2.2 Write Makefile.am +===================== + +You must write the file `Makefile.am'. This is an automake input file, +and the automake manual describes in detail what this file should look +like. + + The automake commands in `Makefile.am' mostly look like variable +assignments in a `Makefile'. automake recognizes special variable +names, and automatically add make rules to the output as needed. + + There will be one `Makefile.am' file for each directory in your +package. For each directory with subdirectories, the `Makefile.am' +file should contain the line + SUBDIRS = DIR DIR ... + where each DIR is the name of a subdirectory. + + For each `Makefile.am', there should be a corresponding `Makefile' +in the `AC_OUTPUT' macro in `configure.in'. + + Every `Makefile.am' written at Cygnus should contain the line + AUTOMAKE_OPTIONS = cygnus + This puts automake into Cygnus mode. See the automake manual for +details. + + You may to include the version number of `automake' that you are +using on the `AUTOMAKE_OPTIONS' line. For example, + AUTOMAKE_OPTIONS = cygnus 1.3 + This will prevent users from running an earlier version of +`automake' and perhaps getting an invalid `Makefile.in'. + + If your package builds a program, then in the directory where that +program is built you will normally want a line like + bin_PROGRAMS = PROGRAM + where PROGRAM is the name of the program. You will then want a line +like + PROGRAM_SOURCES = FILE FILE ... + where each FILE is the name of a source file to link into the +program (e.g., `foo.c'). + + If your package builds a library, and you do not want the library to +ever be built as a shared library, then in the directory where that +library is built you will normally want a line like + lib_LIBRARIES = libNAME.a + where `libNAME.a' is the name of the library. You will then want a +line like + libNAME_a_SOURCES = FILE FILE ... + where each FILE is the name of a source file to add to the library. + + If your package builds a library, and you want to permit building the +library as a shared library, then in the directory where that library is +built you will normally want a line like + lib_LTLIBRARIES = libNAME.la + The use of `LTLIBRARIES', and the `.la' extension, indicate a +library to be built using libtool. As usual, you will then want a line +like + libNAME_la_SOURCES = FILE FILE ... + + The strings `bin' and `lib' that appear above in `bin_PROGRAMS' and +`lib_LIBRARIES' are not arbitrary. They refer to particular +directories, which may be set by the `--bindir' and `--libdir' options +to `configure'. If those options are not used, the default values are +based on the `--prefix' or `--exec-prefix' options to `configure'. It +is possible to use other names if the program or library should be +installed in some other directory. + + The `Makefile.am' file may also contain almost anything that may +appear in a normal `Makefile'. automake also supports many other +special variables, as well as conditionals. + + See the automake manual for more information. + + +File: configure.info, Node: Write acconfig.h, Next: Generate files, Prev: Write Makefile.am, Up: Getting Started + +2.3 Write acconfig.h +==================== + +If you are generating a portability header file, (i.e., you are using +`AM_CONFIG_HEADER' in `configure.in'), then you will have to write a +`acconfig.h' file. It will have to contain the following lines. + + /* Name of package. */ + #undef PACKAGE + + /* Version of package. */ + #undef VERSION + + This requirement is really a bug in the system, and the requirement +may be eliminated at some later date. + + The `acconfig.h' file will also similar comment and `#undef' lines +for any unusual macros in the `configure.in' file, including any macro +which appears in a `AC_DEFINE' macro. + + In particular, if you are writing a GNU package and therefore include +`AC_DEFINE(_GNU_SOURCE)' in `configure.in' as suggested above, you will +need lines like this in `acconfig.h': + /* Enable GNU extensions. */ + #undef _GNU_SOURCE + + Normally the `autoheader' program will inform you of any such +requirements by printing an error message when it is run. However, if +you do anything particular odd in your `configure.in' file, you will +have to make sure that the right entries appear in `acconfig.h', since +otherwise the results of the tests may not be available in the +`config.h' file which your code will use. + + (Thee `PACKAGE' and `VERSION' lines are not required if you are not +using automake, and in that case you may not need a `acconfig.h' file +at all). + + +File: configure.info, Node: Generate files, Next: Getting Started Example, Prev: Write acconfig.h, Up: Getting Started + +2.4 Generate files +================== + +Once you have written `configure.in', `Makefile.am', `acconfig.h', and +possibly `acinclude.m4', you must use autoconf and automake programs to +produce the first versions of the generated files. This is done by +executing the following sequence of commands. + + aclocal + autoconf + autoheader + automake + + The `aclocal' and `automake' commands are part of the automake +package, and the `autoconf' and `autoheader' commands are part of the +autoconf package. + + If you are using a `m4' subdirectory for your macros, you will need +to use the `-I m4' option when you run `aclocal'. + + If you are not using the Cygnus tree, use the `-a' option when +running `automake' command in order to copy the required support files +into your source directory. + + If you are using libtool, you must build and install the libtool +package with the same `--prefix' and `--exec-prefix' options as you +used with the autoconf and automake packages. You must do this before +running any of the above commands. If you are not using the Cygnus +tree, you will need to run the `libtoolize' program to copy the libtool +support files into your directory. + + Once you have managed to run these commands without getting any +errors, you should create a new empty directory, and run the `configure' +script which will have been created by `autoconf' with the +`--enable-maintainer-mode' option. This will give you a set of +Makefiles which will include rules to automatically rebuild all the +generated files. + + After doing that, whenever you have changed some of the input files +and want to regenerated the other files, go to your object directory +and run `make'. Doing this is more reliable than trying to rebuild the +files manually, because there are complex order dependencies and it is +easy to forget something. + + +File: configure.info, Node: Getting Started Example, Prev: Generate files, Up: Getting Started + +2.5 Example +=========== + +Let's consider a trivial example. + + Suppose we want to write a simple version of `touch'. Our program, +which we will call `poke', will take a single file name argument, and +use the `utime' system call to set the modification and access times of +the file to the current time. We want this program to be highly +portable. + + We'll first see what this looks like without using autoconf and +automake, and then see what it looks like with them. + +* Menu: + +* Getting Started Example 1:: First Try. +* Getting Started Example 2:: Second Try. +* Getting Started Example 3:: Third Try. +* Generate Files in Example:: Generate Files. + + +File: configure.info, Node: Getting Started Example 1, Next: Getting Started Example 2, Up: Getting Started Example + +2.5.1 First Try +--------------- + +Here is our first try at `poke.c'. Note that we've written it without +ANSI/ISO C prototypes, since we want it to be highly portable. + + #include + #include + #include + #include + + int + main (argc, argv) + int argc; + char **argv; + { + if (argc != 2) + { + fprintf (stderr, "Usage: poke file\n"); + exit (1); + } + + if (utime (argv[1], NULL) < 0) + { + perror ("utime"); + exit (1); + } + + exit (0); + } + + We also write a simple `Makefile'. + + CC = gcc + CFLAGS = -g -O2 + + all: poke + + poke: poke.o + $(CC) -o poke $(CFLAGS) $(LDFLAGS) poke.o + + So far, so good. + + Unfortunately, there are a few problems. + + On older Unix systems derived from BSD 4.3, the `utime' system call +does not accept a second argument of `NULL'. On those systems, we need +to pass a pointer to `struct utimbuf' structure. Unfortunately, even +older systems don't define that structure; on those systems, we need to +pass an array of two `long' values. + + The header file `stdlib.h' was invented by ANSI C, and older systems +don't have a copy. We included it above to get a declaration of `exit'. + + We can find some of these portability problems by running +`autoscan', which will create a `configure.scan' file which we can use +as a prototype for our `configure.in' file. I won't show the output, +but it will notice the potential problems with `utime' and `stdlib.h'. + + In our `Makefile', we don't provide any way to install the program. +This doesn't matter much for such a simple example, but a real program +will need an `install' target. For that matter, we will also want a +`clean' target. + + +File: configure.info, Node: Getting Started Example 2, Next: Getting Started Example 3, Prev: Getting Started Example 1, Up: Getting Started Example + +2.5.2 Second Try +---------------- + +Here is our second try at this program. + + We modify `poke.c' to use preprocessor macros to control what +features are available. (I've cheated a bit by using the same macro +names which autoconf will use). + + #include + + #ifdef STDC_HEADERS + #include + #endif + + #include + + #ifdef HAVE_UTIME_H + #include + #endif + + #ifndef HAVE_UTIME_NULL + + #include + + #ifndef HAVE_STRUCT_UTIMBUF + + struct utimbuf + { + long actime; + long modtime; + }; + + #endif + + static int + utime_now (file) + char *file; + { + struct utimbuf now; + + now.actime = now.modtime = time (NULL); + return utime (file, &now); + } + + #define utime(f, p) utime_now (f) + + #endif /* HAVE_UTIME_NULL */ + + int + main (argc, argv) + int argc; + char **argv; + { + if (argc != 2) + { + fprintf (stderr, "Usage: poke file\n"); + exit (1); + } + + if (utime (argv[1], NULL) < 0) + { + perror ("utime"); + exit (1); + } + + exit (0); + } + + Here is the associated `Makefile'. We've added support for the +preprocessor flags we use. We've also added `install' and `clean' +targets. + + # Set this to your installation directory. + bindir = /usr/local/bin + + # Uncomment this if you have the standard ANSI/ISO C header files. + # STDC_HDRS = -DSTDC_HEADERS + + # Uncomment this if you have utime.h. + # UTIME_H = -DHAVE_UTIME_H + + # Uncomment this if utime (FILE, NULL) works on your system. + # UTIME_NULL = -DHAVE_UTIME_NULL + + # Uncomment this if struct utimbuf is defined in utime.h. + # UTIMBUF = -DHAVE_STRUCT_UTIMBUF + + CC = gcc + CFLAGS = -g -O2 + + ALL_CFLAGS = $(STDC_HDRS) $(UTIME_H) $(UTIME_NULL) $(UTIMBUF) $(CFLAGS) + + all: poke + + poke: poke.o + $(CC) -o poke $(ALL_CFLAGS) $(LDFLAGS) poke.o + + .c.o: + $(CC) -c $(ALL_CFLAGS) poke.c + + install: poke + cp poke $(bindir)/poke + + clean: + rm poke poke.o + + Some problems with this approach should be clear. + + Users who want to compile poke will have to know how `utime' works +on their systems, so that they can uncomment the `Makefile' correctly. + + The installation is done using `cp', but many systems have an +`install' program which may be used, and which supports optional +features such as stripping debugging information out of the installed +binary. + + The use of `Makefile' variables like `CC', `CFLAGS' and `LDFLAGS' +follows the requirements of the GNU standards. This is convenient for +all packages, since it reduces surprises for users. However, it is +easy to get the details wrong, and wind up with a slightly nonstandard +distribution. + + +File: configure.info, Node: Getting Started Example 3, Next: Generate Files in Example, Prev: Getting Started Example 2, Up: Getting Started Example + +2.5.3 Third Try +--------------- + +For our third try at this program, we will write a `configure.in' +script to discover the configuration features on the host system, rather +than requiring the user to edit the `Makefile'. We will also write a +`Makefile.am' rather than a `Makefile'. + + The only change to `poke.c' is to add a line at the start of the +file: + #include "config.h" + + The new `configure.in' file is as follows. + + AC_INIT(poke.c) + AM_INIT_AUTOMAKE(poke, 1.0) + AM_CONFIG_HEADER(config.h:config.in) + AC_PROG_CC + AC_HEADER_STDC + AC_CHECK_HEADERS(utime.h) + AC_EGREP_HEADER(utimbuf, utime.h, AC_DEFINE(HAVE_STRUCT_UTIMBUF)) + AC_FUNC_UTIME_NULL + AC_OUTPUT(Makefile) + + The first four macros in this file, and the last one, were described +above; see *Note Write configure.in::. If we omit these macros, then +when we run `automake' we will get a reminder that we need them. + + The other macros are standard autoconf macros. + +`AC_HEADER_STDC' + Check for standard C headers. + +`AC_CHECK_HEADERS' + Check whether a particular header file exists. + +`AC_EGREP_HEADER' + Check for a particular string in a particular header file, in this + case checking for `utimbuf' in `utime.h'. + +`AC_FUNC_UTIME_NULL' + Check whether `utime' accepts a NULL second argument to set the + file change time to the current time. + + See the autoconf manual for a more complete description. + + The new `Makefile.am' file is as follows. Note how simple this is +compared to our earlier `Makefile'. + + bin_PROGRAMS = poke + + poke_SOURCES = poke.c + + This means that we should build a single program name `poke'. It +should be installed in the binary directory, which we called `bindir' +earlier. The program `poke' is built from the source file `poke.c'. + + We must also write a `acconfig.h' file. Besides `PACKAGE' and +`VERSION', which must be mentioned for all packages which use automake, +we must include `HAVE_STRUCT_UTIMBUF', since we mentioned it in an +`AC_DEFINE'. + + /* Name of package. */ + #undef PACKAGE + + /* Version of package. */ + #undef VERSION + + /* Whether utime.h defines struct utimbuf. */ + #undef HAVE_STRUCT_UTIMBUF + + +File: configure.info, Node: Generate Files in Example, Prev: Getting Started Example 3, Up: Getting Started Example + +2.5.4 Generate Files +-------------------- + +We must now generate the other files, using the following commands. + + aclocal + autoconf + autoheader + automake + + When we run `autoheader', it will remind us of any macros we forgot +to add to `acconfig.h'. + + When we run `automake', it will want to add some files to our +distribution. It will add them automatically if we use the +`--add-missing' option. + + By default, `automake' will run in GNU mode, which means that it +will want us to create certain additional files; as of this writing, it +will want `NEWS', `README', `AUTHORS', and `ChangeLog', all of which +are files which should appear in a standard GNU distribution. We can +either add those files, or run `automake' with the `--foreign' option. + + Running these tools will generate the following files, all of which +are described in the next chapter. + + * `aclocal.m4' + + * `configure' + + * `config.in' + + * `Makefile.in' + + * `stamp-h.in' + + +File: configure.info, Node: Files, Next: Configuration Names, Prev: Getting Started, Up: Top + +3 Files +******* + +As was seen in the previous chapter, the GNU configure and build system +uses a number of different files. The developer must write a few files. +The others are generated by various tools. + + The system is rather flexible, and can be used in many different +ways. In describing the files that it uses, I will describe the common +case, and mention some other cases that may arise. + +* Menu: + +* Developer Files:: Developer Files. +* Build Files:: Build Files. +* Support Files:: Support Files. + + +File: configure.info, Node: Developer Files, Next: Build Files, Up: Files + +3.1 Developer Files +=================== + +This section describes the files written or generated by the developer +of a package. + +* Menu: + +* Developer Files Picture:: Developer Files Picture. +* Written Developer Files:: Written Developer Files. +* Generated Developer Files:: Generated Developer Files. + + +File: configure.info, Node: Developer Files Picture, Next: Written Developer Files, Up: Developer Files + +3.1.1 Developer Files Picture +----------------------------- + +Here is a picture of the files which are written by the developer, the +generated files which would be included with a complete source +distribution, and the tools which create those files. The file names +are plain text and the tool names are enclosed by `*' characters (e.g., +`autoheader' is the name of a tool, not the name of a file). + + acconfig.h configure.in Makefile.am + | | | + | --------------+---------------------- | + | | | | | + v v | acinclude.m4 | | + *autoheader* | | v v + | | v --->*automake* + v |--->*aclocal* | | + config.in | | | v + | v | Makefile.in + | aclocal.m4--- + | | + v v + *autoconf* + | + v + configure + + +File: configure.info, Node: Written Developer Files, Next: Generated Developer Files, Prev: Developer Files Picture, Up: Developer Files + +3.1.2 Written Developer Files +----------------------------- + +The following files would be written by the developer. + +`configure.in' + This is the configuration script. This script contains + invocations of autoconf macros. It may also contain ordinary + shell script code. This file will contain feature tests for + portability issues. The last thing in the file will normally be + an `AC_OUTPUT' macro listing which files to create when the + builder runs the configure script. This file is always required + when using the GNU configure system. *Note Write configure.in::. + +`Makefile.am' + This is the automake input file. It describes how the code should + be built. It consists of definitions of automake variables. It + may also contain ordinary Makefile targets. This file is only + needed when using automake (newer tools normally use automake, but + there are still older tools which have not been converted, in + which the developer writes `Makefile.in' directly). *Note Write + Makefile.am::. + +`acconfig.h' + When the configure script creates a portability header file, by + using `AM_CONFIG_HEADER' (or, if not using automake, + `AC_CONFIG_HEADER'), this file is used to describe macros which are + not recognized by the `autoheader' command. This is normally a + fairly uninteresting file, consisting of a collection of `#undef' + lines with comments. Normally any call to `AC_DEFINE' in + `configure.in' will require a line in this file. *Note Write + acconfig.h::. + +`acinclude.m4' + This file is not always required. It defines local autoconf + macros. These macros may then be used in `configure.in'. If you + don't need any local autoconf macros, then you don't need this + file at all. In fact, in general, you never need local autoconf + macros, since you can put everything in `configure.in', but + sometimes a local macro is convenient. + + Newer tools may omit `acinclude.m4', and instead use a + subdirectory, typically named `m4', and define `ACLOCAL_AMFLAGS = + -I m4' in `Makefile.am' to force `aclocal' to look there for macro + definitions. The macro definitions are then placed in separate + files in that directory. + + The `acinclude.m4' file is only used when using automake; in older + tools, the developer writes `aclocal.m4' directly, if it is needed. + + +File: configure.info, Node: Generated Developer Files, Prev: Written Developer Files, Up: Developer Files + +3.1.3 Generated Developer Files +------------------------------- + +The following files would be generated by the developer. + + When using automake, these files are normally not generated manually +after the first time. Instead, the generated `Makefile' contains rules +to automatically rebuild the files as required. When +`AM_MAINTAINER_MODE' is used in `configure.in' (the normal case in +Cygnus code), the automatic rebuilding rules will only be defined if +you configure using the `--enable-maintainer-mode' option. + + When using automatic rebuilding, it is important to ensure that all +the various tools have been built and installed on your `PATH'. Using +automatic rebuilding is highly recommended, so much so that I'm not +going to explain what you have to do if you don't use it. + +`configure' + This is the configure script which will be run when building the + package. This is generated by `autoconf' from `configure.in' and + `aclocal.m4'. This is a shell script. + +`Makefile.in' + This is the file which the configure script will turn into the + `Makefile' at build time. This file is generated by `automake' + from `Makefile.am'. If you aren't using automake, you must write + this file yourself. This file is pretty much a normal `Makefile', + with some configure substitutions for certain variables. + +`aclocal.m4' + This file is created by the `aclocal' program, based on the + contents of `configure.in' and `acinclude.m4' (or, as noted in the + description of `acinclude.m4' above, on the contents of an `m4' + subdirectory). This file contains definitions of autoconf macros + which `autoconf' will use when generating the file `configure'. + These autoconf macros may be defined by you in `acinclude.m4' or + they may be defined by other packages such as automake, libtool or + gettext. If you aren't using automake, you will normally write + this file yourself; in that case, if `configure.in' uses only + standard autoconf macros, this file will not be needed at all. + +`config.in' + This file is created by `autoheader' based on `acconfig.h' and + `configure.in'. At build time, the configure script will define + some of the macros in it to create `config.h', which may then be + included by your program. This permits your C code to use + preprocessor conditionals to change its behaviour based on the + characteristics of the host system. This file may also be called + `config.h.in'. + +`stamp.h-in' + This rather uninteresting file, which I omitted from the picture, + is generated by `automake'. It always contains the string + `timestamp'. It is used as a timestamp file indicating whether + `config.in' is up to date. Using a timestamp file means that + `config.in' can be marked as up to date without actually changing + its modification time. This is useful since `config.in' depends + upon `configure.in', but it is easy to change `configure.in' in a + way which does not affect `config.in'. + + +File: configure.info, Node: Build Files, Next: Support Files, Prev: Developer Files, Up: Files + +3.2 Build Files +=============== + +This section describes the files which are created at configure and +build time. These are the files which somebody who builds the package +will see. + + Of course, the developer will also build the package. The +distinction between developer files and build files is not that the +developer does not see the build files, but that somebody who only +builds the package does not have to worry about the developer files. + +* Menu: + +* Build Files Picture:: Build Files Picture. +* Build Files Description:: Build Files Description. + + +File: configure.info, Node: Build Files Picture, Next: Build Files Description, Up: Build Files + +3.2.1 Build Files Picture +------------------------- + +Here is a picture of the files which will be created at build time. +`config.status' is both a created file and a shell script which is run +to create other files, and the picture attempts to show that. + + config.in *configure* Makefile.in + | | | + | v | + | config.status | + | | | + *config.status*<======+==========>*config.status* + | | + v v + config.h Makefile + + +File: configure.info, Node: Build Files Description, Prev: Build Files Picture, Up: Build Files + +3.2.2 Build Files Description +----------------------------- + +This is a description of the files which are created at build time. + +`config.status' + The first step in building a package is to run the `configure' + script. The `configure' script will create the file + `config.status', which is itself a shell script. When you first + run `configure', it will automatically run `config.status'. An + `Makefile' derived from an automake generated `Makefile.in' will + contain rules to automatically run `config.status' again when + necessary to recreate certain files if their inputs change. + +`Makefile' + This is the file which make will read to build the program. The + `config.status' script will transform `Makefile.in' into + `Makefile'. + +`config.h' + This file defines C preprocessor macros which C code can use to + adjust its behaviour on different systems. The `config.status' + script will transform `config.in' into `config.h'. + +`config.cache' + This file did not fit neatly into the picture, and I omitted it. + It is used by the `configure' script to cache results between + runs. This can be an important speedup. If you modify + `configure.in' in such a way that the results of old tests should + change (perhaps you have added a new library to `LDFLAGS'), then + you will have to remove `config.cache' to force the tests to be + rerun. + + The autoconf manual explains how to set up a site specific cache + file. This can speed up running `configure' scripts on your + system. + +`stamp.h' + This file, which I omitted from the picture, is similar to + `stamp-h.in'. It is used as a timestamp file indicating whether + `config.h' is up to date. This is useful since `config.h' depends + upon `config.status', but it is easy for `config.status' to change + in a way which does not affect `config.h'. + + +File: configure.info, Node: Support Files, Prev: Build Files, Up: Files + +3.3 Support Files +================= + +The GNU configure and build system requires several support files to be +included with your distribution. You do not normally need to concern +yourself with these. If you are using the Cygnus tree, most are already +present. Otherwise, they will be installed with your source by +`automake' (with the `--add-missing' option) and `libtoolize'. + + You don't have to put the support files in the top level directory. +You can put them in a subdirectory, and use the `AC_CONFIG_AUX_DIR' +macro in `configure.in' to tell `automake' and the `configure' script +where they are. + + In this section, I describe the support files, so that you can know +what they are and why they are there. + +`ABOUT-NLS' + Added by automake if you are using gettext. This is a + documentation file about the gettext project. + +`ansi2knr.c' + Used by an automake generated `Makefile' if you put `ansi2knr' in + `AUTOMAKE_OPTIONS' in `Makefile.am'. This permits compiling ANSI + C code with a K&R C compiler. + +`ansi2knr.1' + The man page which goes with `ansi2knr.c'. + +`config.guess' + A shell script which determines the configuration name for the + system on which it is run. + +`config.sub' + A shell script which canonicalizes a configuration name entered by + a user. + +`elisp-comp' + Used to compile Emacs LISP files. + +`install-sh' + A shell script which installs a program. This is used if the + configure script can not find an install binary. + +`ltconfig' + Used by libtool. This is a shell script which configures libtool + for the particular system on which it is used. + +`ltmain.sh' + Used by libtool. This is the actual libtool script which is used, + after it is configured by `ltconfig' to build a library. + +`mdate-sh' + A shell script used by an automake generated `Makefile' to pretty + print the modification time of a file. This is used to maintain + version numbers for texinfo files. + +`missing' + A shell script used if some tool is missing entirely. This is + used by an automake generated `Makefile' to avoid certain sorts of + timestamp problems. + +`mkinstalldirs' + A shell script which creates a directory, including all parent + directories. This is used by an automake generated `Makefile' + during installation. + +`texinfo.tex' + Required if you have any texinfo files. This is used when + converting Texinfo files into DVI using `texi2dvi' and TeX. + +`ylwrap' + A shell script used by an automake generated `Makefile' to run + programs like `bison', `yacc', `flex', and `lex'. These programs + default to producing output files with a fixed name, and the + `ylwrap' script runs them in a subdirectory to avoid file name + conflicts when using a parallel make program. + + +File: configure.info, Node: Configuration Names, Next: Cross Compilation Tools, Prev: Files, Up: Top + +4 Configuration Names +********************* + +The GNU configure system names all systems using a "configuration +name". All such names used to be triplets (they may now contain four +parts in certain cases), and the term "configuration triplet" is still +seen. + +* Menu: + +* Configuration Name Definition:: Configuration Name Definition. +* Using Configuration Names:: Using Configuration Names. + + +File: configure.info, Node: Configuration Name Definition, Next: Using Configuration Names, Up: Configuration Names + +4.1 Configuration Name Definition +================================= + +This is a string of the form CPU-MANUFACTURER-OPERATING_SYSTEM. In +some cases, this is extended to a four part form: +CPU-MANUFACTURER-KERNEL-OPERATING_SYSTEM. + + When using a configuration name in a configure option, it is normally +not necessary to specify an entire name. In particular, the +MANUFACTURER field is often omitted, leading to strings such as +`i386-linux' or `sparc-sunos'. The shell script `config.sub' will +translate these shortened strings into the canonical form. autoconf +will arrange for `config.sub' to be run automatically when it is needed. + + The fields of a configuration name are as follows: + +CPU + The type of processor. This is typically something like `i386' or + `sparc'. More specific variants are used as well, such as + `mipsel' to indicate a little endian MIPS processor. + +MANUFACTURER + A somewhat freeform field which indicates the manufacturer of the + system. This is often simply `unknown'. Other common strings are + `pc' for an IBM PC compatible system, or the name of a workstation + vendor, such as `sun'. + +OPERATING_SYSTEM + The name of the operating system which is run on the system. This + will be something like `solaris2.5' or `irix6.3'. There is no + particular restriction on the version number, and strings like + `aix4.1.4.0' are seen. For an embedded system, which has no + operating system, this field normally indicates the type of object + file format, such as `elf' or `coff'. + +KERNEL + This is used mainly for GNU/Linux. A typical GNU/Linux + configuration name is `i586-pc-linux-gnulibc1'. In this case the + kernel, `linux', is separated from the operating system, + `gnulibc1'. + + The shell script `config.guess' will normally print the correct +configuration name for the system on which it is run. It does by +running `uname' and by examining other characteristics of the system. + + Because `config.guess' can normally determine the configuration name +for a machine, it is normally only necessary to specify a configuration +name when building a cross-compiler or when building using a +cross-compiler. + + +File: configure.info, Node: Using Configuration Names, Prev: Configuration Name Definition, Up: Configuration Names + +4.2 Using Configuration Names +============================= + +A configure script will sometimes have to make a decision based on a +configuration name. You will need to do this if you have to compile +code differently based on something which can not be tested using a +standard autoconf feature test. + + It is normally better to test for particular features, rather than to +test for a particular system. This is because as Unix evolves, +different systems copy features from one another. Even if you need to +determine whether the feature is supported based on a configuration +name, you should define a macro which describes the feature, rather than +defining a macro which describes the particular system you are on. + + Testing for a particular system is normally done using a case +statement in `configure.in'. The case statement might look something +like the following, assuming that `host' is a shell variable holding a +canonical configuration name (which will be the case if `configure.in' +uses the `AC_CANONICAL_HOST' or `AC_CANONICAL_SYSTEM' macro). + + case "${host}" in + i[3-7]86-*-linux-gnu*) do something ;; + sparc*-sun-solaris2.[56789]*) do something ;; + sparc*-sun-solaris*) do something ;; + mips*-*-elf*) do something ;; + esac + + It is particularly important to use `*' after the operating system +field, in order to match the version number which will be generated by +`config.guess'. + + In most cases you must be careful to match a range of processor +types. For most processor families, a trailing `*' suffices, as in +`mips*' above. For the i386 family, something along the lines of +`i[3-7]86' suffices at present. For the m68k family, you will need +something like `m68*'. Of course, if you do not need to match on the +processor, it is simpler to just replace the entire field by a `*', as +in `*-*-irix*'. + + +File: configure.info, Node: Cross Compilation Tools, Next: Canadian Cross, Prev: Configuration Names, Up: Top + +5 Cross Compilation Tools +************************* + +The GNU configure and build system can be used to build "cross +compilation" tools. A cross compilation tool is a tool which runs on +one system and produces code which runs on another system. + +* Menu: + +* Cross Compilation Concepts:: Cross Compilation Concepts. +* Host and Target:: Host and Target. +* Using the Host Type:: Using the Host Type. +* Specifying the Target:: Specifying the Target. +* Using the Target Type:: Using the Target Type. +* Cross Tools in the Cygnus Tree:: Cross Tools in the Cygnus Tree + + +File: configure.info, Node: Cross Compilation Concepts, Next: Host and Target, Up: Cross Compilation Tools + +5.1 Cross Compilation Concepts +============================== + +A compiler which produces programs which run on a different system is a +cross compilation compiler, or simply a "cross compiler". Similarly, +we speak of cross assemblers, cross linkers, etc. + + In the normal case, a compiler produces code which runs on the same +system as the one on which the compiler runs. When it is necessary to +distinguish this case from the cross compilation case, such a compiler +is called a "native compiler". Similarly, we speak of native +assemblers, etc. + + Although the debugger is not strictly speaking a compilation tool, +it is nevertheless meaningful to speak of a cross debugger: a debugger +which is used to debug code which runs on another system. Everything +that is said below about configuring cross compilation tools applies to +the debugger as well. + + +File: configure.info, Node: Host and Target, Next: Using the Host Type, Prev: Cross Compilation Concepts, Up: Cross Compilation Tools + +5.2 Host and Target +=================== + +When building cross compilation tools, there are two different systems +involved: the system on which the tools will run, and the system for +which the tools generate code. + + The system on which the tools will run is called the "host" system. + + The system for which the tools generate code is called the "target" +system. + + For example, suppose you have a compiler which runs on a GNU/Linux +system and generates ELF programs for a MIPS embedded system. In this +case the GNU/Linux system is the host, and the MIPS ELF system is the +target. Such a compiler could be called a GNU/Linux cross MIPS ELF +compiler, or, equivalently, a `i386-linux-gnu' cross `mips-elf' +compiler. + + Naturally, most programs are not cross compilation tools. For those +programs, it does not make sense to speak of a target. It only makes +sense to speak of a target for tools like `gcc' or the `binutils' which +actually produce running code. For example, it does not make sense to +speak of the target of a tool like `bison' or `make'. + + Most cross compilation tools can also serve as native tools. For a +native compilation tool, it is still meaningful to speak of a target. +For a native tool, the target is the same as the host. For example, for +a GNU/Linux native compiler, the host is GNU/Linux, and the target is +also GNU/Linux. + + +File: configure.info, Node: Using the Host Type, Next: Specifying the Target, Prev: Host and Target, Up: Cross Compilation Tools + +5.3 Using the Host Type +======================= + +In almost all cases the host system is the system on which you run the +`configure' script, and on which you build the tools (for the case when +they differ, *note Canadian Cross::). + + If your configure script needs to know the configuration name of the +host system, and the package is not a cross compilation tool and +therefore does not have a target, put `AC_CANONICAL_HOST' in +`configure.in'. This macro will arrange to define a few shell +variables when the `configure' script is run. + +`host' + The canonical configuration name of the host. This will normally + be determined by running the `config.guess' shell script, although + the user is permitted to override this by using an explicit + `--host' option. + +`host_alias' + In the unusual case that the user used an explicit `--host' option, + this will be the argument to `--host'. In the normal case, this + will be the same as the `host' variable. + +`host_cpu' +`host_vendor' +`host_os' + The first three parts of the canonical configuration name. + + The shell variables may be used by putting shell code in +`configure.in'. For an example, see *Note Using Configuration Names::. + + +File: configure.info, Node: Specifying the Target, Next: Using the Target Type, Prev: Using the Host Type, Up: Cross Compilation Tools + +5.4 Specifying the Target +========================= + +By default, the `configure' script will assume that the target is the +same as the host. This is the more common case; for example, it leads +to a native compiler rather than a cross compiler. + + If you want to build a cross compilation tool, you must specify the +target explicitly by using the `--target' option when you run +`configure'. The argument to `--target' is the configuration name of +the system for which you wish to generate code. *Note Configuration +Names::. + + For example, to build tools which generate code for a MIPS ELF +embedded system, you would use `--target mips-elf'. + + +File: configure.info, Node: Using the Target Type, Next: Cross Tools in the Cygnus Tree, Prev: Specifying the Target, Up: Cross Compilation Tools + +5.5 Using the Target Type +========================= + +When writing `configure.in' for a cross compilation tool, you will need +to use information about the target. To do this, put +`AC_CANONICAL_SYSTEM' in `configure.in'. + + `AC_CANONICAL_SYSTEM' will look for a `--target' option and +canonicalize it using the `config.sub' shell script. It will also run +`AC_CANONICAL_HOST' (*note Using the Host Type::). + + The target type will be recorded in the following shell variables. +Note that the host versions of these variables will also be defined by +`AC_CANONICAL_HOST'. + +`target' + The canonical configuration name of the target. + +`target_alias' + The argument to the `--target' option. If the user did not specify + a `--target' option, this will be the same as `host_alias'. + +`target_cpu' +`target_vendor' +`target_os' + The first three parts of the canonical target configuration name. + + Note that if `host' and `target' are the same string, you can assume +a native configuration. If they are different, you can assume a cross +configuration. + + It is arguably possible for `host' and `target' to represent the +same system, but for the strings to not be identical. For example, if +`config.guess' returns `sparc-sun-sunos4.1.4', and somebody configures +with `--target sparc-sun-sunos4.1', then the slight differences between +the two versions of SunOS may be unimportant for your tool. However, +in the general case it can be quite difficult to determine whether the +differences between two configuration names are significant or not. +Therefore, by convention, if the user specifies a `--target' option +without specifying a `--host' option, it is assumed that the user wants +to configure a cross compilation tool. + + The variables `target' and `target_alias' should be handled +differently. + + In general, whenever the user may actually see a string, +`target_alias' should be used. This includes anything which may appear +in the file system, such as a directory name or part of a tool name. +It also includes any tool output, unless it is clearly labelled as the +canonical target configuration name. This permits the user to use the +`--target' option to specify how the tool will appear to the outside +world. + + On the other hand, when checking for characteristics of the target +system, `target' should be used. This is because a wide variety of +`--target' options may map into the same canonical configuration name. +You should not attempt to duplicate the canonicalization done by +`config.sub' in your own code. + + By convention, cross tools are installed with a prefix of the +argument used with the `--target' option, also known as `target_alias' +(*note Using the Target Type::). If the user does not use the +`--target' option, and thus is building a native tool, no prefix is +used. + + For example, if gcc is configured with `--target mips-elf', then the +installed binary will be named `mips-elf-gcc'. If gcc is configured +without a `--target' option, then the installed binary will be named +`gcc'. + + The autoconf macro `AC_ARG_PROGRAM' will handle this for you. If +you are using automake, no more need be done; the programs will +automatically be installed with the correct prefixes. Otherwise, see +the autoconf documentation for `AC_ARG_PROGRAM'. + + +File: configure.info, Node: Cross Tools in the Cygnus Tree, Prev: Using the Target Type, Up: Cross Compilation Tools + +5.6 Cross Tools in the Cygnus Tree +================================== + +The Cygnus tree is used for various packages including gdb, the GNU +binutils, and egcs. It is also, of course, used for Cygnus releases. + + In the Cygnus tree, the top level `configure' script uses the old +Cygnus configure system, not autoconf. The top level `Makefile.in' is +written to build packages based on what is in the source tree, and +supports building a large number of tools in a single +`configure'/`make' step. + + The Cygnus tree may be configured with a `--target' option. The +`--target' option applies recursively to every subdirectory, and +permits building an entire set of cross tools at once. + +* Menu: + +* Host and Target Libraries:: Host and Target Libraries. +* Target Library Configure Scripts:: Target Library Configure Scripts. +* Make Targets in Cygnus Tree:: Make Targets in Cygnus Tree. +* Target libiberty:: Target libiberty + + +File: configure.info, Node: Host and Target Libraries, Next: Target Library Configure Scripts, Up: Cross Tools in the Cygnus Tree + +5.6.1 Host and Target Libraries +------------------------------- + +The Cygnus tree distinguishes host libraries from target libraries. + + Host libraries are built with the compiler used to build the programs +which run on the host, which is called the host compiler. This includes +libraries such as `bfd' and `tcl'. These libraries are built with the +host compiler, and are linked into programs like the binutils or gcc +which run on the host. + + Target libraries are built with the target compiler. If gcc is +present in the source tree, then the target compiler is the gcc that is +built using the host compiler. Target libraries are libraries such as +`newlib' and `libstdc++'. These libraries are not linked into the host +programs, but are instead made available for use with programs built +with the target compiler. + + For the rest of this section, assume that gcc is present in the +source tree, so that it will be used to build the target libraries. + + There is a complication here. The configure process needs to know +which compiler you are going to use to build a tool; otherwise, the +feature tests will not work correctly. The Cygnus tree handles this by +not configuring the target libraries until the target compiler is +built. In order to permit everything to build using a single +`configure'/`make', the configuration of the target libraries is +actually triggered during the make step. + + When the target libraries are configured, the `--target' option is +not used. Instead, the `--host' option is used with the argument of +the `--target' option for the overall configuration. If no `--target' +option was used for the overall configuration, the `--host' option will +be passed with the output of the `config.guess' shell script. Any +`--build' option is passed down unchanged. + + This translation of configuration options is done because since the +target libraries are compiled with the target compiler, they are being +built in order to run on the target of the overall configuration. By +the definition of host, this means that their host system is the same as +the target system of the overall configuration. + + The same process is used for both a native configuration and a cross +configuration. Even when using a native configuration, the target +libraries will be configured and built using the newly built compiler. +This is particularly important for the C++ libraries, since there is no +reason to assume that the C++ compiler used to build the host tools (if +there even is one) uses the same ABI as the g++ compiler which will be +used to build the target libraries. + + There is one difference between a native configuration and a cross +configuration. In a native configuration, the target libraries are +normally configured and built as siblings of the host tools. In a cross +configuration, the target libraries are normally built in a subdirectory +whose name is the argument to `--target'. This is mainly for +historical reasons. + + To summarize, running `configure' in the Cygnus tree configures all +the host libraries and tools, but does not configure any of the target +libraries. Running `make' then does the following steps: + + * Build the host libraries. + + * Build the host programs, including gcc. Note that we call gcc + both a host program (since it runs on the host) and a target + compiler (since it generates code for the target). + + * Using the newly built target compiler, configure the target + libraries. + + * Build the target libraries. + + The steps need not be done in precisely this order, since they are +actually controlled by `Makefile' targets. + + +File: configure.info, Node: Target Library Configure Scripts, Next: Make Targets in Cygnus Tree, Prev: Host and Target Libraries, Up: Cross Tools in the Cygnus Tree + +5.6.2 Target Library Configure Scripts +-------------------------------------- + +There are a few things you must know in order to write a configure +script for a target library. This is just a quick sketch, and beginners +shouldn't worry if they don't follow everything here. + + The target libraries are configured and built using a newly built +target compiler. There may not be any startup files or libraries for +this target compiler. In fact, those files will probably be built as +part of some target library, which naturally means that they will not +exist when your target library is configured. + + This means that the configure script for a target library may not use +any test which requires doing a link. This unfortunately includes many +useful autoconf macros, such as `AC_CHECK_FUNCS'. autoconf macros +which do a compile but not a link, such as `AC_CHECK_HEADERS', may be +used. + + This is a severe restriction, but normally not a fatal one, as target +libraries can often assume the presence of other target libraries, and +thus know which functions will be available. + + As of this writing, the autoconf macro `AC_PROG_CC' does a link to +make sure that the compiler works. This may fail in a target library, +so target libraries must use a different set of macros to locate the +compiler. See the `configure.in' file in a directory like `libiberty' +or `libgloss' for an example. + + As noted in the previous section, target libraries are sometimes +built in directories which are siblings to the host tools, and are +sometimes built in a subdirectory. The `--with-target-subdir' configure +option will be passed when the library is configured. Its value will be +an empty string if the target library is a sibling. Its value will be +the name of the subdirectory if the target library is in a subdirectory. + + If the overall build is not a native build (i.e., the overall +configure used the `--target' option), then the library will be +configured with the `--with-cross-host' option. The value of this +option will be the host system of the overall build. Recall that the +host system of the library will be the target of the overall build. If +the overall build is a native build, the `--with-cross-host' option +will not be used. + + A library which can be built both standalone and as a target library +may want to install itself into different directories depending upon the +case. When built standalone, or when built native, the library should +be installed in `$(libdir)'. When built as a target library which is +not native, the library should be installed in `$(tooldir)/lib'. The +`--with-cross-host' option may be used to distinguish these cases. + + This same test of `--with-cross-host' may be used to see whether it +is OK to use link tests in the configure script. If the +`--with-cross-host' option is not used, then the library is being built +either standalone or native, and a link should work. + + +File: configure.info, Node: Make Targets in Cygnus Tree, Next: Target libiberty, Prev: Target Library Configure Scripts, Up: Cross Tools in the Cygnus Tree + +5.6.3 Make Targets in Cygnus Tree +--------------------------------- + +The top level `Makefile' in the Cygnus tree defines targets for every +known subdirectory. + + For every subdirectory DIR which holds a host library or program, +the `Makefile' target `all-DIR' will build that library or program. + + There are dependencies among host tools. For example, building gcc +requires first building gas, because the gcc build process invokes the +target assembler. These dependencies are reflected in the top level +`Makefile'. + + For every subdirectory DIR which holds a target library, the +`Makefile' target `configure-target-DIR' will configure that library. +The `Makefile' target `all-target-DIR' will build that library. + + Every `configure-target-DIR' target depends upon `all-gcc', since +gcc, the target compiler, is required to configure the tool. Every +`all-target-DIR' target depends upon the corresponding +`configure-target-DIR' target. + + There are several other targets which may be of interest for each +directory: `install-DIR', `clean-DIR', and `check-DIR'. There are also +corresponding `target' versions of these for the target libraries , +such as `install-target-DIR'. + + +File: configure.info, Node: Target libiberty, Prev: Make Targets in Cygnus Tree, Up: Cross Tools in the Cygnus Tree + +5.6.4 Target libiberty +---------------------- + +The `libiberty' subdirectory is currently a special case, in that it is +the only directory which is built both using the host compiler and +using the target compiler. + + This is because the files in `libiberty' are used when building the +host tools, and they are also incorporated into the `libstdc++' target +library as support code. + + This duality does not pose any particular difficulties. It means +that there are targets for both `all-libiberty' and +`all-target-libiberty'. + + In a native configuration, when target libraries are not built in a +subdirectory, the same objects are normally used as both the host build +and the target build. This is normally OK, since libiberty contains +only C code, and in a native configuration the results of the host +compiler and the target compiler are normally interoperable. + + Irix 6 is again an exception here, since the SGI native compiler +defaults to using the `O32' ABI, and gcc defaults to using the `N32' +ABI. On Irix 6, the target libraries are built in a subdirectory even +for a native configuration, avoiding this problem. + + There are currently no other libraries built for both the host and +the target, but there is no conceptual problem with adding more. + + +File: configure.info, Node: Canadian Cross, Next: Cygnus Configure, Prev: Cross Compilation Tools, Up: Top + +6 Canadian Cross +**************** + +It is possible to use the GNU configure and build system to build a +program which will run on a system which is different from the system on +which the tools are built. In other words, it is possible to build +programs using a cross compiler. + + This is referred to as a "Canadian Cross". + +* Menu: + +* Canadian Cross Example:: Canadian Cross Example. +* Canadian Cross Concepts:: Canadian Cross Concepts. +* Build Cross Host Tools:: Build Cross Host Tools. +* Build and Host Options:: Build and Host Options. +* CCross not in Cygnus Tree:: Canadian Cross not in Cygnus Tree. +* CCross in Cygnus Tree:: Canadian Cross in Cygnus Tree. +* Supporting Canadian Cross:: Supporting Canadian Cross. + + +File: configure.info, Node: Canadian Cross Example, Next: Canadian Cross Concepts, Up: Canadian Cross + +6.1 Canadian Cross Example +========================== + +Here is an example of a Canadian Cross. + + While running on a GNU/Linux, you can build a program which will run +on a Solaris system. You would use a GNU/Linux cross Solaris compiler +to build the program. + + Of course, you could not run the resulting program on your GNU/Linux +system. You would have to copy it over to a Solaris system before you +would run it. + + Of course, you could also simply build the programs on the Solaris +system in the first place. However, perhaps the Solaris system is not +available for some reason; perhaps you actually don't have one, but you +want to build the tools for somebody else to use. Or perhaps your +GNU/Linux system is much faster than your Solaris system. + + A Canadian Cross build is most frequently used when building +programs to run on a non-Unix system, such as DOS or Windows. It may +be simpler to configure and build on a Unix system than to support the +configuration machinery on a non-Unix system. + + +File: configure.info, Node: Canadian Cross Concepts, Next: Build Cross Host Tools, Prev: Canadian Cross Example, Up: Canadian Cross + +6.2 Canadian Cross Concepts +=========================== + +When building a Canadian Cross, there are at least two different systems +involved: the system on which the tools are being built, and the system +on which the tools will run. + + The system on which the tools are being built is called the "build" +system. + + The system on which the tools will run is called the host system. + + For example, if you are building a Solaris program on a GNU/Linux +system, as in the previous section, the build system would be GNU/Linux, +and the host system would be Solaris. + + It is, of course, possible to build a cross compiler using a Canadian +Cross (i.e., build a cross compiler using a cross compiler). In this +case, the system for which the resulting cross compiler generates code +is called the target system. (For a more complete discussion of host +and target systems, *note Host and Target::). + + An example of building a cross compiler using a Canadian Cross would +be building a Windows cross MIPS ELF compiler on a GNU/Linux system. In +this case the build system would be GNU/Linux, the host system would be +Windows, and the target system would be MIPS ELF. + + The name Canadian Cross comes from the case when the build, host, and +target systems are all different. At the time that these issues were +all being hashed out, Canada had three national political parties. + + +File: configure.info, Node: Build Cross Host Tools, Next: Build and Host Options, Prev: Canadian Cross Concepts, Up: Canadian Cross + +6.3 Build Cross Host Tools +========================== + +In order to configure a program for a Canadian Cross build, you must +first build and install the set of cross tools you will use to build the +program. + + These tools will be build cross host tools. That is, they will run +on the build system, and will produce code that runs on the host system. + + It is easy to confuse the meaning of build and host here. Always +remember that the build system is where you are doing the build, and the +host system is where the resulting program will run. Therefore, you +need a build cross host compiler. + + In general, you must have a complete cross environment in order to do +the build. This normally means a cross compiler, cross assembler, and +so forth, as well as libraries and include files for the host system. + + +File: configure.info, Node: Build and Host Options, Next: CCross not in Cygnus Tree, Prev: Build Cross Host Tools, Up: Canadian Cross + +6.4 Build and Host Options +========================== + +When you run `configure', you must use both the `--build' and `--host' +options. + + The `--build' option is used to specify the configuration name of +the build system. This can normally be the result of running the +`config.guess' shell script, and it is reasonable to use +`--build=`config.guess`'. + + The `--host' option is used to specify the configuration name of the +host system. + + As we explained earlier, `config.guess' is used to set the default +value for the `--host' option (*note Using the Host Type::). We can +now see that since `config.guess' returns the type of system on which +it is run, it really identifies the build system. Since the host +system is normally the same as the build system (i.e., people do not +normally build using a cross compiler), it is reasonable to use the +result of `config.guess' as the default for the host system when the +`--host' option is not used. + + It might seem that if the `--host' option were used without the +`--build' option that the configure script could run `config.guess' to +determine the build system, and presume a Canadian Cross if the result +of `config.guess' differed from the `--host' option. However, for +historical reasons, some configure scripts are routinely run using an +explicit `--host' option, rather than using the default from +`config.guess'. As noted earlier, it is difficult or impossible to +reliably compare configuration names (*note Using the Target Type::). +Therefore, by convention, if the `--host' option is used, but the +`--build' option is not used, then the build system defaults to the +host system. + + +File: configure.info, Node: CCross not in Cygnus Tree, Next: CCross in Cygnus Tree, Prev: Build and Host Options, Up: Canadian Cross + +6.5 Canadian Cross not in Cygnus Tree. +====================================== + +If you are not using the Cygnus tree, you must explicitly specify the +cross tools which you want to use to build the program. This is done by +setting environment variables before running the `configure' script. + + You must normally set at least the environment variables `CC', `AR', +and `RANLIB' to the cross tools which you want to use to build. + + For some programs, you must set additional cross tools as well, such +as `AS', `LD', or `NM'. + + You would set these environment variables to the build cross tools +which you are going to use. + + For example, if you are building a Solaris program on a GNU/Linux +system, and your GNU/Linux cross Solaris compiler were named +`solaris-gcc', then you would set the environment variable `CC' to +`solaris-gcc'. + + +File: configure.info, Node: CCross in Cygnus Tree, Next: Supporting Canadian Cross, Prev: CCross not in Cygnus Tree, Up: Canadian Cross + +6.6 Canadian Cross in Cygnus Tree +================================= + +This section describes configuring and building a Canadian Cross when +using the Cygnus tree. + +* Menu: + +* Standard Cygnus CCross:: Building a Normal Program. +* Cross Cygnus CCross:: Building a Cross Program. + + +File: configure.info, Node: Standard Cygnus CCross, Next: Cross Cygnus CCross, Up: CCross in Cygnus Tree + +6.6.1 Building a Normal Program +------------------------------- + +When configuring a Canadian Cross in the Cygnus tree, all the +appropriate environment variables are automatically set to `HOST-TOOL', +where HOST is the value used for the `--host' option, and TOOL is the +name of the tool (e.g., `gcc', `as', etc.). These tools must be on +your `PATH'. + + Adding a prefix of HOST will give the usual name for the build cross +host tools. To see this, consider that when these cross tools were +built, they were configured to run on the build system and to produce +code for the host system. That is, they were configured with a +`--target' option that is the same as the system which we are now +calling the host. Recall that the default name for installed cross +tools uses the target system as a prefix (*note Using the Target +Type::). Since that is the system which we are now calling the host, +HOST is the right prefix to use. + + For example, if you configure with `--build=i386-linux-gnu' and +`--host=solaris', then the Cygnus tree will automatically default to +using the compiler `solaris-gcc'. You must have previously built and +installed this compiler, probably by doing a build with no `--host' +option and with a `--target' option of `solaris'. + + +File: configure.info, Node: Cross Cygnus CCross, Prev: Standard Cygnus CCross, Up: CCross in Cygnus Tree + +6.6.2 Building a Cross Program +------------------------------ + +There are additional considerations if you want to build a cross +compiler, rather than a native compiler, in the Cygnus tree using a +Canadian Cross. + + When you build a cross compiler using the Cygnus tree, then the +target libraries will normally be built with the newly built target +compiler (*note Host and Target Libraries::). However, this will not +work when building with a Canadian Cross. This is because the newly +built target compiler will be a program which runs on the host system, +and therefore will not be able to run on the build system. + + Therefore, when building a cross compiler with the Cygnus tree, you +must first install a set of build cross target tools. These tools will +be used when building the target libraries. + + Note that this is not a requirement of a Canadian Cross in general. +For example, it would be possible to build just the host cross target +tools on the build system, to copy the tools to the host system, and to +build the target libraries on the host system. The requirement for +build cross target tools is imposed by the Cygnus tree, which expects +to be able to build both host programs and target libraries in a single +`configure'/`make' step. Because it builds these in a single step, it +expects to be able to build the target libraries on the build system, +which means that it must use a build cross target toolchain. + + For example, suppose you want to build a Windows cross MIPS ELF +compiler on a GNU/Linux system. You must have previously installed +both a GNU/Linux cross Windows compiler and a GNU/Linux cross MIPS ELF +compiler. + + In order to build the Windows (configuration name `i386-cygwin32') +cross MIPS ELF (configure name `mips-elf') compiler, you might execute +the following commands (long command lines are broken across lines with +a trailing backslash as a continuation character). + + mkdir linux-x-cygwin32 + cd linux-x-cygwin32 + SRCDIR/configure --target i386-cygwin32 --prefix=INSTALLDIR \ + --exec-prefix=INSTALLDIR/H-i386-linux + make + make install + cd .. + mkdir linux-x-mips-elf + cd linux-x-mips-elf + SRCDIR/configure --target mips-elf --prefix=INSTALLDIR \ + --exec-prefix=INSTALLDIR/H-i386-linux + make + make install + cd .. + mkdir cygwin32-x-mips-elf + cd cygwin32-x-mips-elf + SRCDIR/configure --build=i386-linux-gnu --host=i386-cygwin32 \ + --target=mips-elf --prefix=WININSTALLDIR \ + --exec-prefix=WININSTALLDIR/H-i386-cygwin32 + make + make install + + You would then copy the contents of WININSTALLDIR over to the +Windows machine, and run the resulting programs. + + +File: configure.info, Node: Supporting Canadian Cross, Prev: CCross in Cygnus Tree, Up: Canadian Cross + +6.7 Supporting Canadian Cross +============================= + +If you want to make it possible to build a program you are developing +using a Canadian Cross, you must take some care when writing your +configure and make rules. Simple cases will normally work correctly. +However, it is not hard to write configure and make tests which will +fail in a Canadian Cross. + +* Menu: + +* CCross in Configure:: Supporting Canadian Cross in Configure Scripts. +* CCross in Make:: Supporting Canadian Cross in Makefiles. + + +File: configure.info, Node: CCross in Configure, Next: CCross in Make, Up: Supporting Canadian Cross + +6.7.1 Supporting Canadian Cross in Configure Scripts +---------------------------------------------------- + +In a `configure.in' file, after calling `AC_PROG_CC', you can find out +whether this is a Canadian Cross configure by examining the shell +variable `cross_compiling'. In a Canadian Cross, which means that the +compiler is a cross compiler, `cross_compiling' will be `yes'. In a +normal configuration, `cross_compiling' will be `no'. + + You ordinarily do not need to know the type of the build system in a +configure script. However, if you do need that information, you can get +it by using the macro `AC_CANONICAL_SYSTEM', the same macro that is +used to determine the target system. This macro will set the variables +`build', `build_alias', `build_cpu', `build_vendor', and `build_os', +which correspond to the similar `target' and `host' variables, except +that they describe the build system. + + When writing tests in `configure.in', you must remember that you +want to test the host environment, not the build environment. + + Macros like `AC_CHECK_FUNCS' which use the compiler will test the +host environment. That is because the tests will be done by running the +compiler, which is actually a build cross host compiler. If the +compiler can find the function, that means that the function is present +in the host environment. + + Tests like `test -f /dev/ptyp0', on the other hand, will test the +build environment. Remember that the configure script is running on the +build system, not the host system. If your configure scripts examines +files, those files will be on the build system. Whatever you determine +based on those files may or may not be the case on the host system. + + Most autoconf macros will work correctly for a Canadian Cross. The +main exception is `AC_TRY_RUN'. This macro tries to compile and run a +test program. This will fail in a Canadian Cross, because the program +will be compiled for the host system, which means that it will not run +on the build system. + + The `AC_TRY_RUN' macro provides an optional argument to tell the +configure script what to do in a Canadian Cross. If that argument is +not present, you will get a warning when you run `autoconf': + warning: AC_TRY_RUN called without default to allow cross compiling + This tells you that the resulting `configure' script will not work +with a Canadian Cross. + + In some cases while it may better to perform a test at configure +time, it is also possible to perform the test at run time. In such a +case you can use the cross compiling argument to `AC_TRY_RUN' to tell +your program that the test could not be performed at configure time. + + There are a few other autoconf macros which will not work correctly +with a Canadian Cross: a partial list is `AC_FUNC_GETPGRP', +`AC_FUNC_SETPGRP', `AC_FUNC_SETVBUF_REVERSED', and +`AC_SYS_RESTARTABLE_SYSCALLS'. The `AC_CHECK_SIZEOF' macro is +generally not very useful with a Canadian Cross; it permits an optional +argument indicating the default size, but there is no way to know what +the correct default should be. + + +File: configure.info, Node: CCross in Make, Prev: CCross in Configure, Up: Supporting Canadian Cross + +6.7.2 Supporting Canadian Cross in Makefiles. +--------------------------------------------- + +The main Canadian Cross issue in a `Makefile' arises when you want to +use a subsidiary program to generate code or data which you will then +include in your real program. + + If you compile this subsidiary program using `$(CC)' in the usual +way, you will not be able to run it. This is because `$(CC)' will +build a program for the host system, but the program is being built on +the build system. + + You must instead use a compiler for the build system, rather than the +host system. In the Cygnus tree, this make variable `$(CC_FOR_BUILD)' +will hold a compiler for the build system. + + Note that you should not include `config.h' in a file you are +compiling with `$(CC_FOR_BUILD)'. The `configure' script will build +`config.h' with information for the host system. However, you are +compiling the file using a compiler for the build system (a native +compiler). Subsidiary programs are normally simple filters which do no +user interaction, and it is normally possible to write them in a highly +portable fashion so that the absence of `config.h' is not crucial. + + The gcc `Makefile.in' shows a complex situation in which certain +files, such as `rtl.c', must be compiled into both subsidiary programs +run on the build system and into the final program. This approach may +be of interest for advanced build system hackers. Note that the build +system compiler is rather confusingly called `HOST_CC'. + + +File: configure.info, Node: Cygnus Configure, Next: Multilibs, Prev: Canadian Cross, Up: Top + +7 Cygnus Configure +****************** + +The Cygnus configure script predates autoconf. All of its interesting +features have been incorporated into autoconf. No new programs should +be written to use the Cygnus configure script. + + However, the Cygnus configure script is still used in a few places: +at the top of the Cygnus tree and in a few target libraries in the +Cygnus tree. Until those uses have been replaced with autoconf, some +brief notes are appropriate here. This is not complete documentation, +but it should be possible to use this as a guide while examining the +scripts themselves. + +* Menu: + +* Cygnus Configure Basics:: Cygnus Configure Basics. +* Cygnus Configure in C++ Libraries:: Cygnus Configure in C++ Libraries. + + +File: configure.info, Node: Cygnus Configure Basics, Next: Cygnus Configure in C++ Libraries, Up: Cygnus Configure + +7.1 Cygnus Configure Basics +=========================== + +Cygnus configure does not use any generated files; there is no program +corresponding to `autoconf'. Instead, there is a single shell script +named `configure' which may be found at the top of the Cygnus tree. +This shell script was written by hand; it was not generated by +autoconf, and it is incorrect, and indeed harmful, to run `autoconf' in +the top level of a Cygnus tree. + + Cygnus configure works in a particular directory by examining the +file `configure.in' in that directory. That file is broken into four +separate shell scripts. + + The first is the contents of `configure.in' up to a line that starts +with `# per-host:'. This is the common part. + + The second is the rest of `configure.in' up to a line that starts +with `# per-target:'. This is the per host part. + + The third is the rest of `configure.in' up to a line that starts +with `# post-target:'. This is the per target part. + + The fourth is the remainder of `configure.in'. This is the post +target part. + + If any of these comment lines are missing, the corresponding shell +script is empty. + + Cygnus configure will first execute the common part. This must set +the shell variable `srctrigger' to the name of a source file, to +confirm that Cygnus configure is looking at the right directory. This +may set the shell variables `package_makefile_frag' and +`package_makefile_rules_frag'. + + Cygnus configure will next set the `build' and `host' shell +variables, and execute the per host part. This may set the shell +variable `host_makefile_frag'. + + Cygnus configure will next set the `target' variable, and execute +the per target part. This may set the shell variable +`target_makefile_frag'. + + Any of these scripts may set the `subdirs' shell variable. This +variable is a list of subdirectories where a `Makefile.in' file may be +found. Cygnus configure will automatically look for a `Makefile.in' +file in the current directory. The `subdirs' shell variable is not +normally used, and I believe that the only directory which uses it at +present is `newlib'. + + For each `Makefile.in', Cygnus configure will automatically create a +`Makefile' by adding definitions for `make' variables such as `host' +and `target', and automatically editing the values of `make' variables +such as `prefix' if they are present. + + Also, if any of the `makefile_frag' shell variables are set, Cygnus +configure will interpret them as file names relative to either the +working directory or the source directory, and will read the contents of +the file into the generated `Makefile'. The file contents will be read +in after the first line in `Makefile.in' which starts with `####'. + + These `Makefile' fragments are used to customize behaviour for a +particular host or target. They serve to select particular files to +compile, and to define particular preprocessor macros by providing +values for `make' variables which are then used during compilation. +Cygnus configure, unlike autoconf, normally does not do feature tests, +and normally requires support to be added manually for each new host. + + The `Makefile' fragment support is similar to the autoconf +`AC_SUBST_FILE' macro. + + After creating each `Makefile', the post target script will be run +(i.e., it may be run several times). This script may further customize +the `Makefile'. When it is run, the shell variable `Makefile' will +hold the name of the `Makefile', including the appropriate directory +component. + + Like an autoconf generated `configure' script, Cygnus configure will +create a file named `config.status' which, when run, will automatically +recreate the configuration. The `config.status' file will simply +execute the Cygnus configure script again with the appropriate +arguments. + + Any of the parts of `configure.in' may set the shell variables +`files' and `links'. Cygnus configure will set up symlinks from the +names in `links' to the files named in `files'. This is similar to the +autoconf `AC_LINK_FILES' macro. + + Finally, any of the parts of `configure.in' may set the shell +variable `configdirs' to a set of subdirectories. If it is set, Cygnus +configure will recursively run the configure process in each +subdirectory. If the subdirectory uses Cygnus configure, it will +contain a `configure.in' file but no `configure' file, in which case +Cygnus configure will invoke itself recursively. If the subdirectory +has a `configure' file, Cygnus configure assumes that it is an autoconf +generated `configure' script, and simply invokes it directly. + + +File: configure.info, Node: Cygnus Configure in C++ Libraries, Prev: Cygnus Configure Basics, Up: Cygnus Configure + +7.2 Cygnus Configure in C++ Libraries +===================================== + +The C++ library configure system, written by Per Bothner, deserves +special mention. It uses Cygnus configure, but it does feature testing +like that done by autoconf generated `configure' scripts. This +approach is used in the libraries `libio', `libstdc++', and `libg++'. + + Most of the `Makefile' information is written out by the shell +script `libio/config.shared'. Each `configure.in' file sets certain +shell variables, and then invokes `config.shared' to create two package +`Makefile' fragments. These fragments are then incorporated into the +resulting `Makefile' by the Cygnus configure script. + + The file `_G_config.h' is created in the `libio' object directory by +running the shell script `libio/gen-params'. This shell script uses +feature tests to define macros and typedefs in `_G_config.h'. + + +File: configure.info, Node: Multilibs, Next: FAQ, Prev: Cygnus Configure, Up: Top + +8 Multilibs +*********** + +For some targets gcc may have different processor requirements depending +upon command line options. An obvious example is the `-msoft-float' +option supported on several processors. This option means that the +floating point registers are not available, which means that floating +point operations must be done by calling an emulation subroutine rather +than by using machine instructions. + + For such options, gcc is often configured to compile target libraries +twice: once with `-msoft-float' and once without. When gcc compiles +target libraries more than once, the resulting libraries are called +"multilibs". + + Multilibs are not really part of the GNU configure and build system, +but we discuss them here since they require support in the `configure' +scripts and `Makefile's used for target libraries. + +* Menu: + +* Multilibs in gcc:: Multilibs in gcc. +* Multilibs in Target Libraries:: Multilibs in Target Libraries. + + +File: configure.info, Node: Multilibs in gcc, Next: Multilibs in Target Libraries, Up: Multilibs + +8.1 Multilibs in gcc +==================== + +In gcc, multilibs are defined by setting the variable +`MULTILIB_OPTIONS' in the target `Makefile' fragment. Several other +`MULTILIB' variables may also be defined there. *Note The Target +Makefile Fragment: (gcc)Target Fragment. + + If you have built gcc, you can see what multilibs it uses by running +it with the `-print-multi-lib' option. The output `.;' means that no +multilibs are used. In general, the output is a sequence of lines, one +per multilib. The first part of each line, up to the `;', is the name +of the multilib directory. The second part is a list of compiler +options separated by `@' characters. + + Multilibs are built in a tree of directories. The top of the tree, +represented by `.' in the list of multilib directories, is the default +library to use when no special compiler options are used. The +subdirectories of the tree hold versions of the library to use when +particular compiler options are used. + + +File: configure.info, Node: Multilibs in Target Libraries, Prev: Multilibs in gcc, Up: Multilibs + +8.2 Multilibs in Target Libraries +================================= + +The target libraries in the Cygnus tree are automatically built with +multilibs. That means that each library is built multiple times. + + This default is set in the top level `configure.in' file, by adding +`--enable-multilib' to the list of arguments passed to configure when +it is run for the target libraries (*note Host and Target Libraries::). + + Each target library uses the shell script `config-ml.in', written by +Doug Evans, to prepare to build target libraries. This shell script is +invoked after the `Makefile' has been created by the `configure' +script. If multilibs are not enabled, it does nothing, otherwise it +modifies the `Makefile' to support multilibs. + + The `config-ml.in' script makes one copy of the `Makefile' for each +multilib in the appropriate subdirectory. When configuring in the +source directory (which is not recommended), it will build a symlink +tree of the sources in each subdirectory. + + The `config-ml.in' script sets several variables in the various +`Makefile's. The `Makefile.in' must have definitions for these +variables already; `config-ml.in' simply changes the existing values. +The `Makefile' should use default values for these variables which will +do the right thing in the subdirectories. + +`MULTISRCTOP' + `config-ml.in' will set this to a sequence of `../' strings, where + the number of strings is the number of multilib levels in the + source tree. The default value should be the empty string. + +`MULTIBUILDTOP' + `config-ml.in' will set this to a sequence of `../' strings, where + the number of strings is number of multilib levels in the object + directory. The default value should be the empty string. This + will differ from `MULTISRCTOP' when configuring in the source tree + (which is not recommended). + +`MULTIDIRS' + In the top level `Makefile' only, `config-ml.in' will set this to + the list of multilib subdirectories. The default value should be + the empty string. + +`MULTISUBDIR' + `config-ml.in' will set this to the installed subdirectory name to + use for this subdirectory, with a leading `/'. The default value + shold be the empty string. + +`MULTIDO' +`MULTICLEAN' + In the top level `Makefile' only, `config-ml.in' will set these + variables to commands to use when doing a recursive make. These + variables should both default to the string `true', so that by + default nothing happens. + + All references to the parent of the source directory should use the +variable `MULTISRCTOP'. Instead of writing `$(srcdir)/..', you must +write `$(srcdir)/$(MULTISRCTOP)..'. + + Similarly, references to the parent of the object directory should +use the variable `MULTIBUILDTOP'. + + In the installation target, the libraries should be installed in the +subdirectory `MULTISUBDIR'. Instead of installing +`$(libdir)/libfoo.a', install `$(libdir)$(MULTISUBDIR)/libfoo.a'. + + The `config-ml.in' script also modifies the top level `Makefile' to +add `multi-do' and `multi-clean' targets which are used when building +multilibs. + + The default target of the `Makefile' should include the following +command: + @$(MULTIDO) $(FLAGS_TO_PASS) DO=all multi-do + This assumes that `$(FLAGS_TO_PASS)' is defined as a set of +variables to pass to a recursive invocation of `make'. This will build +all the multilibs. Note that the default value of `MULTIDO' is `true', +so by default this command will do nothing. It will only do something +in the top level `Makefile' if multilibs were enabled. + + The `install' target of the `Makefile' should include the following +command: + @$(MULTIDO) $(FLAGS_TO_PASS) DO=install multi-do + + In general, any operation, other than clean, which should be +performed on all the multilibs should use a `$(MULTIDO)' line, setting +the variable `DO' to the target of each recursive call to `make'. + + The `clean' targets (`clean', `mostlyclean', etc.) should use +`$(MULTICLEAN)'. For example, the `clean' target should do this: + @$(MULTICLEAN) DO=clean multi-clean + + +File: configure.info, Node: FAQ, Next: Index, Prev: Multilibs, Up: Top + +9 Frequently Asked Questions +**************************** + +Which do I run first, `autoconf' or `automake'? + Except when you first add autoconf or automake support to a + package, you shouldn't run either by hand. Instead, configure + with the `--enable-maintainer-mode' option, and let `make' take + care of it. + +`autoconf' says something about undefined macros. + This means that you have macros in your `configure.in' which are + not defined by `autoconf'. You may be using an old version of + `autoconf'; try building and installing a newer one. Make sure the + newly installled `autoconf' is first on your `PATH'. Also, see + the next question. + +My `configure' script has stuff like `CY_GNU_GETTEXT' in it. + This means that you have macros in your `configure.in' which should + be defined in your `aclocal.m4' file, but aren't. This usually + means that `aclocal' was not able to appropriate definitions of the + macros. Make sure that you have installed all the packages you + need. In particular, make sure that you have installed libtool + (this is where `AM_PROG_LIBTOOL' is defined) and gettext (this is + where `CY_GNU_GETTEXT' is defined, at least in the Cygnus version + of gettext). + +My `Makefile' has `@' characters in it. + This may mean that you tried to use an autoconf substitution in + your `Makefile.in' without adding the appropriate `AC_SUBST' call + to your `configure' script. Or it may just mean that you need to + rebuild `Makefile' in your build directory. To rebuild `Makefile' + from `Makefile.in', run the shell script `config.status' with no + arguments. If you need to force `configure' to run again, first + run `config.status --recheck'. These runs are normally done + automatically by `Makefile' targets, but if your `Makefile' has + gotten messed up you'll need to help them along. + +Why do I have to run both `config.status --recheck' and `config.status'? + Normally, you don't; they will be run automatically by `Makefile' + targets. If you do need to run them, use `config.status --recheck' + to run the `configure' script again with the same arguments as the + first time you ran it. Use `config.status' (with no arguments) to + regenerate all files (`Makefile', `config.h', etc.) based on the + results of the configure script. The two cases are separate + because it isn't always necessary to regenerate all the files + after running `config.status --recheck'. The `Makefile' targets + generated by automake will use the environment variables + `CONFIG_FILES' and `CONFIG_HEADERS' to only regenerate files as + they are needed. + +What is the Cygnus tree? + The Cygnus tree is used for various packages including gdb, the GNU + binutils, and egcs. It is also, of course, used for Cygnus + releases. It is the build system which was developed at Cygnus, + using the Cygnus configure script. It permits building many + different packages with a single configure and make. The + configure scripts in the tree are being converted to autoconf, but + the general build structure remains intact. + +Why do I have to keep rebuilding and reinstalling the tools? + I know, it's a pain. Unfortunately, there are bugs in the tools + themselves which need to be fixed, and each time that happens + everybody who uses the tools need to reinstall new versions of + them. I don't know if there is going to be a clever fix until the + tools stabilize. + +Why not just have a Cygnus tree `make' target to update the tools? + The tools unfortunately need to be installed before they can be + used. That means that they must be built using an appropriate + prefix, and it seems unwise to assume that every configuration + uses an appropriate prefix. It might be possible to make them + work in place, or it might be possible to install them in some + subdirectory; so far these approaches have not been implemented. + + +File: configure.info, Node: Index, Prev: FAQ, Up: Top + +Index +***** + +[index] +* Menu: + +* --build option: Build and Host Options. + (line 9) +* --host option: Build and Host Options. + (line 14) +* --target option: Specifying the Target. + (line 10) +* _GNU_SOURCE: Write configure.in. (line 134) +* AC_CANONICAL_HOST: Using the Host Type. (line 10) +* AC_CANONICAL_SYSTEM: Using the Target Type. + (line 6) +* AC_CONFIG_HEADER: Write configure.in. (line 66) +* AC_EXEEXT: Write configure.in. (line 86) +* AC_INIT: Write configure.in. (line 38) +* AC_OUTPUT: Write configure.in. (line 142) +* AC_PREREQ: Write configure.in. (line 42) +* AC_PROG_CC: Write configure.in. (line 103) +* AC_PROG_CXX: Write configure.in. (line 117) +* acconfig.h: Written Developer Files. + (line 27) +* acconfig.h, writing: Write acconfig.h. (line 6) +* acinclude.m4: Written Developer Files. + (line 37) +* aclocal.m4: Generated Developer Files. + (line 33) +* AM_CONFIG_HEADER: Write configure.in. (line 53) +* AM_DISABLE_SHARED: Write configure.in. (line 127) +* AM_EXEEXT: Write configure.in. (line 86) +* AM_INIT_AUTOMAKE: Write configure.in. (line 48) +* AM_MAINTAINER_MODE: Write configure.in. (line 70) +* AM_PROG_LIBTOOL: Write configure.in. (line 122) +* AM_PROG_LIBTOOL in configure: FAQ. (line 19) +* build option: Build and Host Options. + (line 9) +* building with a cross compiler: Canadian Cross. (line 6) +* canadian cross: Canadian Cross. (line 6) +* canadian cross in configure: CCross in Configure. (line 6) +* canadian cross in cygnus tree: CCross in Cygnus Tree. + (line 6) +* canadian cross in makefile: CCross in Make. (line 6) +* canadian cross, configuring: Build and Host Options. + (line 6) +* canonical system names: Configuration Names. (line 6) +* config.cache: Build Files Description. + (line 28) +* config.h: Build Files Description. + (line 23) +* config.h.in: Generated Developer Files. + (line 45) +* config.in: Generated Developer Files. + (line 45) +* config.status: Build Files Description. + (line 9) +* config.status --recheck: FAQ. (line 40) +* configuration names: Configuration Names. (line 6) +* configuration triplets: Configuration Names. (line 6) +* configure: Generated Developer Files. + (line 21) +* configure build system: Build and Host Options. + (line 9) +* configure host: Build and Host Options. + (line 14) +* configure target: Specifying the Target. + (line 10) +* configure.in: Written Developer Files. + (line 9) +* configure.in, writing: Write configure.in. (line 6) +* configuring a canadian cross: Build and Host Options. + (line 6) +* cross compiler: Cross Compilation Concepts. + (line 6) +* cross compiler, building with: Canadian Cross. (line 6) +* cross tools: Cross Compilation Tools. + (line 6) +* CY_GNU_GETTEXT in configure: FAQ. (line 19) +* cygnus configure: Cygnus Configure. (line 6) +* goals: Goals. (line 6) +* history: History. (line 6) +* host names: Configuration Names. (line 6) +* host option: Build and Host Options. + (line 14) +* host system: Host and Target. (line 6) +* host triplets: Configuration Names. (line 6) +* HOST_CC: CCross in Make. (line 27) +* libg++ configure: Cygnus Configure in C++ Libraries. + (line 6) +* libio configure: Cygnus Configure in C++ Libraries. + (line 6) +* libstdc++ configure: Cygnus Configure in C++ Libraries. + (line 6) +* Makefile: Build Files Description. + (line 18) +* Makefile, garbage characters: FAQ. (line 29) +* Makefile.am: Written Developer Files. + (line 18) +* Makefile.am, writing: Write Makefile.am. (line 6) +* Makefile.in: Generated Developer Files. + (line 26) +* multilibs: Multilibs. (line 6) +* stamp-h: Build Files Description. + (line 41) +* stamp-h.in: Generated Developer Files. + (line 54) +* system names: Configuration Names. (line 6) +* system types: Configuration Names. (line 6) +* target option: Specifying the Target. + (line 10) +* target system: Host and Target. (line 6) +* triplets: Configuration Names. (line 6) +* undefined macros: FAQ. (line 12) + + + +Tag Table: +Node: Top971 +Node: Introduction1499 +Node: Goals2581 +Node: Tools3305 +Node: History4299 +Node: Building7297 +Node: Getting Started10560 +Node: Write configure.in11073 +Node: Write Makefile.am18324 +Node: Write acconfig.h21501 +Node: Generate files23038 +Node: Getting Started Example25004 +Node: Getting Started Example 125759 +Node: Getting Started Example 227680 +Node: Getting Started Example 330675 +Node: Generate Files in Example33039 +Node: Files34129 +Node: Developer Files34740 +Node: Developer Files Picture35120 +Node: Written Developer Files36408 +Node: Generated Developer Files38960 +Node: Build Files42104 +Node: Build Files Picture42765 +Node: Build Files Description43529 +Node: Support Files45535 +Node: Configuration Names48417 +Node: Configuration Name Definition48917 +Node: Using Configuration Names51240 +Node: Cross Compilation Tools53210 +Node: Cross Compilation Concepts53901 +Node: Host and Target54869 +Node: Using the Host Type56370 +Node: Specifying the Target57719 +Node: Using the Target Type58508 +Node: Cross Tools in the Cygnus Tree61939 +Node: Host and Target Libraries62996 +Node: Target Library Configure Scripts66745 +Node: Make Targets in Cygnus Tree69837 +Node: Target libiberty71185 +Node: Canadian Cross72572 +Node: Canadian Cross Example73413 +Node: Canadian Cross Concepts74532 +Node: Build Cross Host Tools76044 +Node: Build and Host Options76996 +Node: CCross not in Cygnus Tree78782 +Node: CCross in Cygnus Tree79760 +Node: Standard Cygnus CCross80181 +Node: Cross Cygnus CCross81545 +Node: Supporting Canadian Cross84345 +Node: CCross in Configure84960 +Node: CCross in Make88128 +Node: Cygnus Configure89731 +Node: Cygnus Configure Basics90566 +Node: Cygnus Configure in C++ Libraries95244 +Node: Multilibs96251 +Node: Multilibs in gcc97296 +Node: Multilibs in Target Libraries98374 +Node: FAQ102565 +Node: Index106665 + +End Tag Table -- cgit v1.2.1