2004-07-06 Andrew Cagney <cagney@gnu.org>

	* gdb.base/sigbpt.exp, gdb.base/sigbpt.c: New test.

3 files changed, 320 insertions, 0 deletions

diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index 7eff41e9c2..2f83f7b5f2 100644
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,3 +1,7 @@
+2004-07-06  Andrew Cagney  <cagney@gnu.org>
+
+	* gdb.base/sigbpt.exp, gdb.base/sigbpt.c: New test.
+
 2004-07-02  Michael Chastain  <mec.gnu@mindspring.com>
 
 	* lib/compiler.c: Accept __HP_CXD_SPP for old hp ansi c compiler.
diff --git a/gdb/testsuite/gdb.base/sigbpt.c b/gdb/testsuite/gdb.base/sigbpt.c
new file mode 100644
index 0000000000..b189f6da7d
--- /dev/null
+++ b/gdb/testsuite/gdb.base/sigbpt.c
@@ -0,0 +1,53 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+   Copyright 2004 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+ 
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+   02111-1307, USA.  */
+
+#include <signal.h>
+#include <stdlib.h>
+#include <string.h>
+
+extern void
+keeper (int sig)
+{
+}
+
+volatile long v1 = 0;
+volatile long v2 = 0;
+volatile long v3 = 0;
+
+extern long
+bowler (void)
+{
+  /* Try to read address zero.  Do it in a slightly convoluted way so
+     that more than one instruction is used.  */
+  return *(char *) (v1 + v2 + v3);
+}
+
+int
+main ()
+{
+  static volatile int i;
+
+  struct sigaction act;
+  memset (&act, 0, sizeof act);
+  act.sa_handler = keeper;
+  sigaction (SIGSEGV, &act, NULL);
+
+  bowler ();
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.base/sigbpt.exp b/gdb/testsuite/gdb.base/sigbpt.exp
new file mode 100644
index 0000000000..46d0c86a4b
--- /dev/null
+++ b/gdb/testsuite/gdb.base/sigbpt.exp
@@ -0,0 +1,263 @@
+# This testcase is part of GDB, the GNU debugger.
+
+# Copyright 2004 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Check that GDB can and only executes single instructions when
+# stepping through a sequence of breakpoints interleaved by a signal
+# handler.
+
+# This test is known to tickle the following problems: kernel letting
+# the inferior execute both the system call, and the instruction
+# following, when single-stepping a system call; kernel failing to
+# propogate the single-step state when single-stepping the sigreturn
+# system call, instead resuming the inferior at full speed; GDB
+# doesn't know how to software single-step across a sigreturn
+# instruction.  Since the kernel problems can be "fixed" using
+# software single-step this is KFAILed rather than XFAILed.
+
+if $tracelevel {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "sigbpt"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+#
+# Run to `main' where we begin our tests.
+#
+
+if ![runto_main] then {
+    gdb_suppress_tests
+}
+
+# If we can examine what's at memory address 0, it is possible that we
+# could also execute it.  This could probably make us run away,
+# executing random code, which could have all sorts of ill effects,
+# especially on targets without an MMU.  Don't run the tests in that
+# case.
+
+send_gdb "x 0\n"
+gdb_expect {
+    -re "0x0:.*Cannot access memory at address 0x0.*$gdb_prompt $" { }
+    -re "0x0:.*Error accessing memory address 0x0.*$gdb_prompt $" { }
+    -re ".*$gdb_prompt $" {
+	untested "Memory at address 0 is possibly executable"
+	return
+    }
+}
+
+gdb_test "break keeper"
+
+# Run to bowler, and then single step until there's a SIGSEGV.  Record
+# the address of each single-step instruction (up to and including the
+# instruction that causes the SIGSEGV) in bowler_addrs, and the address
+# of the actual SIGSEGV in segv_addr.
+
+set bowler_addrs bowler
+gdb_test {display/i $pc}
+gdb_test "advance *bowler" "bowler.*" "advance to the bowler"
+set test "stepping to SIGSEGV"
+gdb_test_multiple "stepi" "$test" {
+    -re "Program received signal SIGSEGV.*pc *(0x\[0-9a-f\]*).*$gdb_prompt $" {
+	set segv_addr $expect_out(1,string)
+	pass "$test"
+    }
+    -re " .*pc *(0x\[0-9a-f\]*).*bowler.*$gdb_prompt $" {
+	set bowler_addrs [concat $expect_out(1,string) $bowler_addrs]
+	send_gdb "stepi\n"
+	exp_continue
+    }
+}
+
+# Now record the address of the instruction following the faulting
+# instruction in bowler_addrs.
+
+set test "get insn after fault"
+gdb_test_multiple {x/2i $pc} "$test" {
+    -re "(0x\[0-9a-f\]*).*bowler.*(0x\[0-9a-f\]*).*bowler.*$gdb_prompt $" {
+	set bowler_addrs [concat $expect_out(2,string) $bowler_addrs]
+	pass "$test"
+    }
+}
+
+# Procedures for returning the address of the instruction before, at
+# and after, the faulting instruction.
+
+proc before_segv { } {
+    global bowler_addrs
+    return [lindex $bowler_addrs 2]
+}
+
+proc at_segv { } {
+    global bowler_addrs
+    return [lindex $bowler_addrs 1]
+}
+
+proc after_segv { } {
+    global bowler_addrs
+    return [lindex $bowler_addrs 0]
+}
+
+# Check that the address table and SIGSEGV correspond.
+
+set test "Verify that SIGSEGV occurs at the last STEPI insn"
+if {[string compare $segv_addr [at_segv]] == 0} {
+    pass "$test"
+} else {
+    fail "$test ($segv_addr [at_segv])"
+}
+
+# Check that the inferior is correctly single stepped all the way back
+# to a faulting instruction.
+
+proc stepi_out { name args } {
+    global gdb_prompt
+
+    # Set SIGSEGV to pass+nostop and then run the inferior all the way
+    # through to the signal handler.  With the handler is reached,
+    # disable SIGSEGV, ensuring that further signals stop the
+    # inferior.  Stops a SIGSEGV infinite loop when a broke system
+    # keeps re-executing the faulting instruction.
+    rerun_to_main
+    gdb_test "handle SIGSEGV nostop print pass" "" "pass SIGSEGV; $name"
+    gdb_test "continue" "keeper.*" "continue to keeper; $name"
+    gdb_test "handle SIGSEGV stop print nopass" "" "nopass SIGSEGV; $name"
+
+    # Insert all the breakpoints.  To avoid the need to step over
+    # these instructions, this is delayed until after the keeper has
+    # been reached.
+    for {set i 0} {$i < [llength $args]} {incr i} {
+	gdb_test "break [lindex $args $i]" "Breakpoint.*" \
+	    "set breakpoint $i of [llength $args]; $name"
+    }
+
+    # Single step our way out of the keeper, through the signal
+    # trampoline, and back to the instruction that faulted.
+    set test "stepi out of handler; $name"
+    gdb_test_multiple "stepi" "$test" {
+	-re "keeper.*$gdb_prompt $" {
+	    send_gdb "stepi\n"
+	    exp_continue
+	}
+	-re "signal handler.*$gdb_prompt $" {
+	    send_gdb "stepi\n"
+	    exp_continue
+	}
+	-re "Program received signal SIGSEGV.*$gdb_prompt $" {
+	    kfail gdb/1702 "$test (executed fault insn)"
+	}
+	-re "Breakpoint.*pc *[at_segv] .*bowler.*$gdb_prompt $" {
+	    pass "$test (at breakpoint)"
+	}
+	-re "Breakpoint.*pc *[after_segv] .*bowler.*$gdb_prompt $" {
+	    kfail gdb/1702 "$test (executed breakpoint)"
+	}
+	-re "pc *[at_segv] .*bowler.*$gdb_prompt $" {
+	    pass "$test"
+	}
+	-re "pc *[after_segv] .*bowler.*$gdb_prompt $" {
+	    kfail gdb/1702 "$test (skipped fault insn)"
+	}
+    }
+
+    # Clear any breakpoints
+    for {set i 0} {$i < [llength $args]} {incr i} {
+	gdb_test "clear [lindex $args $i]" "Deleted .*" \
+	    "clear breakpoint $i of [llength $args]; $name"
+    }
+}
+
+# Let a signal handler exit, returning to a breakpoint instruction
+# inserted at the original fault instruction.  Check that the
+# breakpoint is hit, and that single stepping off that breakpoint
+# executes the underlying fault instruction causing a SIGSEGV.
+
+proc cont_out { name args } {
+    global gdb_prompt
+
+    # Set SIGSEGV to pass+nostop and then run the inferior all the way
+    # through to the signal handler.  With the handler is reached,
+    # disable SIGSEGV, ensuring that further signals stop the
+    # inferior.  Stops a SIGSEGV infinite loop when a broke system
+    # keeps re-executing the faulting instruction.
+    rerun_to_main
+    gdb_test "handle SIGSEGV nostop print pass" "" "pass SIGSEGV; $name"
+    gdb_test "continue" "keeper.*" "continue to keeper; $name"
+    gdb_test "handle SIGSEGV stop print nopass" "" "nopass SIGSEGV; $name"
+
+    # Insert all the breakpoints.  To avoid the need to step over
+    # these instructions, this is delayed until after the keeper has
+    # been reached.  Always set a breakpoint at the signal trampoline
+    # instruction.
+    set args [concat $args "*[at_segv]"]
+    for {set i 0} {$i < [llength $args]} {incr i} {
+	gdb_test "break [lindex $args $i]" "Breakpoint.*" \
+	    "set breakpoint $i  of [llength $args]; $name"
+    }
+
+    # Let the handler return, it should "appear to hit" the breakpoint
+    # inserted at the faulting instruction.  Note that the breakpoint
+    # instruction wasn't executed, rather the inferior was SIGTRAPed
+    # with the PC at the breakpoint.
+    gdb_test "continue" "Breakpoint.*pc *[at_segv] .*" \
+	"continue to breakpoint at fault; $name"
+
+    # Now single step the faulted instrction at that breakpoint.
+    gdb_test "stepi" \
+	"Program received signal SIGSEGV.*pc *[at_segv] .*" \
+	"stepi fault; $name"    
+
+    # Clear any breakpoints
+    for {set i 0} {$i < [llength $args]} {incr i} {
+	gdb_test "clear [lindex $args $i]" "Deleted .*" \
+	    "clear breakpoint $i of [llength $args]; $name"
+    }
+
+}
+
+
+
+# Try to confuse DECR_PC_AFTER_BREAK architectures by scattering
+# breakpoints around the faulting address.  In all cases the inferior
+# should single-step out of the signal trampoline halting (but not
+# executing) the fault instruction.
+
+stepi_out "stepi"
+stepi_out "stepi bp before segv" "*[before_segv]"
+stepi_out "stepi bp at segv" "*[at_segv]"
+stepi_out "stepi bp before and at segv" "*[at_segv]" "*[before_segv]"
+
+
+# Try to confuse DECR_PC_AFTER_BREAK architectures by scattering
+# breakpoints around the faulting address.  In all cases the inferior
+# should exit the signal trampoline halting at the breakpoint that
+# replaced the fault instruction.
+cont_out "cont"
+cont_out "cont bp after segv" "*[before_segv]"
+cont_out "cont bp before and after segv" "*[before_segv]" "*[after_segv]"