diff options
Diffstat (limited to 'xyz/openbmc_project/Inventory/MultiRecord/PowerSupply.interface.yaml')
-rw-r--r-- | xyz/openbmc_project/Inventory/MultiRecord/PowerSupply.interface.yaml | 121 |
1 files changed, 121 insertions, 0 deletions
diff --git a/xyz/openbmc_project/Inventory/MultiRecord/PowerSupply.interface.yaml b/xyz/openbmc_project/Inventory/MultiRecord/PowerSupply.interface.yaml new file mode 100644 index 0000000..688b901 --- /dev/null +++ b/xyz/openbmc_project/Inventory/MultiRecord/PowerSupply.interface.yaml @@ -0,0 +1,121 @@ +description: > + MultiRecord Power Supply Information (Record Type 0x00) + In accordance with IPMI Platform Management FRU Information + Storage Definition v1.0 Document Revision 1.3, Table 18-1. + +properties: + - name: OveralCapacity + type: int64 + description: > + Offset 0, bits 11..0. + Overall capacity (watts) + - name: PeakVA + type: int64 + description: > + Offset 2. + Peak VA + - name: InrushCurrent + type: int64 + description: > + Offset 4. + Inrush current + - name: InrushInterval + type: int64 + description: > + Offset 5. + Inrush interval in ms. + - name: LowInputVoltage1 + type: int64 + description: > + Offset 6. + Low end Input voltage range 1 (10mV) + - name: HighInputVoltage1 + type: int64 + description: > + Offset 8. + High end Input voltage range 1 (10mV) + - name: LowInputVoltage2 + type: int64 + description: > + Offset 10. + Low end Input voltage range 2 (10mV) + - name: HighInputVoltage2 + type: int64 + description: > + Offset 12. + High end Input voltage range 2 (10mV) + - name: LowInputFrequency + type: int64 + description: > + Offset 14. + Low end Input frequency range + - name: HighInputFrequency + type: int64 + description: > + Offset 15. + High end Input frequency range + - name: InDropoutTolerance + type: int64 + description: > + Offset 16. + Input dropout tolerance in ms + - name: TachoPPR_FailPinPolarity + type: boolean + description: > + Offset 17, bit 4. + Tachometer pulses per rotation/Predictive fail pin polarity. + Meaning depends on PrediciveFailSupport. + False means 1 pulse per rotation (for tacho) or assertion indicates failure (for predictive falure pin). + True means 2 pulses per rotation (for tacho) or deassertion indicates failure (for predictive falure pin). + - name: HotSwap + type: boolean + description: > + Offset 17, bit 3. + Hot Swap Support + - name: Autoswitch + type: boolean + description: > + Offset 17, bit 2. + Autoswitch + - name: PowerFactor + type: boolean + description: > + Offset 17, bit 1. + Power factor correction + - name: PredictiveFailSupport + type: boolean + description: > + Offset 17, bit 0. + Predictive fail pin supported. When false, tachometer is used instead. + Affects meaning of TachoPPR_FailPinPolarity. + - name: HoldUpTime + type: int64 + description: > + Offset 18, bits 15..12. + Peak Wattage hold up time in seconds + - name: PeakCapacity + type: int64 + description: > + Offset 18, bits 11..0. + Peak capacity (watts) + - name: Voltage1 + type: int64 + description: > + Offset 20, byte 1, bits 7..4. + Combined Wattage Voltage 1 + - name: Voltage2 + type: int64 + description: > + Offset 20, byte 1, bits 3..0. + Combined Wattage Voltage 2 + - name: TotalWattage + type: int64 + description: > + Offset 20, bytes 2..3. + Total Combined Wattage + - name: TachometerLow + type: int64 + description: > + Offset 23. + Predictive fail tachometer lower threshold (RPS). + Used when PredictiveFailSupport is false. |