# We have to override the new %%install behavior because, well... the kernel is special. %global __spec_install_pre %{___build_pre} Summary: The Linux kernel # For a stable, released kernel, released_kernel should be 1. For rawhide # and/or a kernel built from an rc or git snapshot, released_kernel should # be 0. %global released_kernel 1 # Sign modules on x86. Make sure the config files match this setting if more # architectures are added. %ifarch %{ix86} x86_64 %global signkernel 1 %global signmodules 1 %global zipmodules 1 %else %global signkernel 0 %global signmodules 1 %global zipmodules 0 %endif %if %{zipmodules} %global zipsed -e 's/\.ko$/\.ko.xz/' %endif # define buildid .local # baserelease defines which build revision of this kernel version we're # building. We used to call this fedora_build, but the magical name # baserelease is matched by the rpmdev-bumpspec tool, which you should use. # # We used to have some extra magic weirdness to bump this automatically, # but now we don't. Just use: rpmdev-bumpspec -c 'comment for changelog' # When changing base_sublevel below or going from rc to a final kernel, # reset this by hand to 1 (or to 0 and then use rpmdev-bumpspec). # scripts/rebase.sh should be made to do that for you, actually. # # NOTE: baserelease must be > 0 or bad things will happen if you switch # to a released kernel (released version will be < rc version) # # For non-released -rc kernels, this will be appended after the rcX and # gitX tags, so a 3 here would become part of release "0.rcX.gitX.3" # %global baserelease 100 %global fedora_build %{baserelease} # base_sublevel is the kernel version we're starting with and patching # on top of -- for example, 3.1-rc7-git1 starts with a 3.0 base, # which yields a base_sublevel of 0. %define base_sublevel 8 # librev starts empty, then 1, etc, as the linux-libre tarball # changes. This is only used to determine which tarball to use. #define librev %define baselibre -libre %define basegnu -gnu%{?librev} # To be inserted between "patch" and "-2.6.". %define stablelibre -4.8%{?stablegnux} #define rcrevlibre -4.8%{?rcrevgnux} #define gitrevlibre -4.8%{?gitrevgnux} %if 0%{?stablelibre:1} %define stablegnu -gnu%{?librev} %endif %if 0%{?rcrevlibre:1} %define rcrevgnu -gnu%{?librev} %endif %if 0%{?gitrevlibre:1} %define gitrevgnu -gnu%{?librev} %endif %if !0%{?stablegnux:1} %define stablegnux %{?stablegnu} %endif %if !0%{?rcrevgnux:1} %define rcrevgnux %{?rcrevgnu} %endif %if !0%{?gitrevgnux:1} %define gitrevgnux %{?gitrevgnu} %endif # libres (s for suffix) may be bumped for rebuilds in which patches # change but fedora_build doesn't. Make sure there's a dot after # librev if a libre build count is to follow. It is appended after # dist. %define libres .gnu%{?librev} ## If this is a released kernel ## %if 0%{?released_kernel} # Do we have a -stable update to apply? %define stable_update 14 # Set rpm version accordingly %if 0%{?stable_update} %define stablerev %{stable_update} %define stable_base %{stable_update} %endif %define rpmversion 4.%{base_sublevel}.%{stable_update} ## The not-released-kernel case ## %else # The next upstream release sublevel (base_sublevel+1) %define upstream_sublevel %(echo $((%{base_sublevel} + 1))) # The rc snapshot level %define rcrev 0 # The git snapshot level %define gitrev 0 # Set rpm version accordingly %define rpmversion 4.%{upstream_sublevel}.0 %endif # Nb: The above rcrev and gitrev values automagically define Patch00 and Patch01 below. # What parts do we want to build? We must build at least one kernel. # These are the kernels that are built IF the architecture allows it. # All should default to 1 (enabled) and be flipped to 0 (disabled) # by later arch-specific checks. # The following build options are enabled by default. # Use either --without in your rpmbuild command or force values # to 0 in here to disable them. # # standard kernel %define with_up %{?_without_up: 0} %{?!_without_up: 1} # kernel PAE (only valid for i686 (PAE) and ARM (lpae)) %define with_pae %{?_without_pae: 0} %{?!_without_pae: 1} # kernel-debug %define with_debug %{?_without_debug: 0} %{?!_without_debug: 1} # kernel-headers %define with_headers %{?_without_headers: 0} %{?!_without_headers: 1} %define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1} # kernel-firmware %define with_firmware %{?_with_firmware: 1} %{?!_with_firmware: 0} # perf %define with_perf %{?_without_perf: 0} %{?!_without_perf: 1} # tools %define with_tools %{?_without_tools: 0} %{?!_without_tools: 1} # kernel-debuginfo %define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1} # kernel-bootwrapper (for creating zImages from kernel + initrd) %define with_bootwrapper %{?_without_bootwrapper: 0} %{?!_without_bootwrapper: 1} # Want to build a the vsdo directories installed %define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1} # # Additional options for user-friendly one-off kernel building: # # Only build the base kernel (--with baseonly): %define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0} # Only build the pae kernel (--with paeonly): %define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0} # Only build the debug kernel (--with dbgonly): %define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0} # # should we do C=1 builds with sparse %define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0} # # Cross compile requested? %define with_cross %{?_with_cross: 1} %{?!_with_cross: 0} # # build a release kernel on rawhide %define with_release %{?_with_release: 1} %{?!_with_release: 0} # Set debugbuildsenabled to 1 for production (build separate debug kernels) # and 0 for rawhide (all kernels are debug kernels). # See also 'make debug' and 'make release'. %define debugbuildsenabled 1 # Want to build a vanilla kernel build without any non-upstream patches? %define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0} # pkg_release is what we'll fill in for the rpm Release: field %if 0%{?released_kernel} %define pkg_release %{fedora_build}%{?buildid}%{?dist}%{?libres} %else # non-released_kernel %if 0%{?rcrev} %define rctag .rc%rcrev %else %define rctag .rc0 %endif %if 0%{?gitrev} %define gittag .git%gitrev %else %define gittag .git0 %endif %define pkg_release 0%{?rctag}%{?gittag}.%{fedora_build}%{?buildid}%{?dist}%{?libres} %endif # The kernel tarball/base version %define kversion 4.%{base_sublevel} %define make_target bzImage %define image_install_path boot %define KVERREL %{version}-libre.%{release}.%{_target_cpu} %define hdrarch %_target_cpu %define asmarch %_target_cpu %if 0%{!?nopatches:1} %define nopatches 0 %endif %if %{with_vanilla} %define nopatches 1 %endif %if %{nopatches} %define with_bootwrapper 0 %define variant -vanilla %endif %if !%{debugbuildsenabled} %define with_debug 0 %endif %if !%{with_debuginfo} %define _enable_debug_packages 0 %endif %define debuginfodir /usr/lib/debug # kernel PAE is only built on i686 and ARMv7. %ifnarch i686 armv7hl %define with_pae 0 %endif # if requested, only build base kernel %if %{with_baseonly} %define with_pae 0 %define with_debug 0 %endif # if requested, only build pae kernel %if %{with_paeonly} %define with_up 0 %define with_debug 0 %endif # if requested, only build debug kernel %if %{with_dbgonly} %if %{debugbuildsenabled} %define with_up 0 %define with_pae 0 %endif %define with_pae 0 %define with_tools 0 %define with_perf 0 %endif %define all_x86 i386 i686 %if %{with_vdso_install} # These arches install vdso/ directories. %define vdso_arches %{all_x86} x86_64 %{power64} s390 s390x aarch64 %endif # Overrides for generic default options # don't do debug builds on anything but i686 and x86_64 %ifnarch i686 x86_64 %define with_debug 0 %endif # don't build noarch kernels or headers (duh) %ifarch noarch %define with_up 0 %define with_headers 0 %define with_cross_headers 0 %define with_tools 0 %define with_perf 0 %define all_arch_configs kernel-%{version}-*.config %define with_firmware %{?_without_firmware: 0} %{?!_without_firmware: 1} %endif # bootwrapper is only on ppc # sparse blows up on ppc %ifnarch %{power64} %define with_bootwrapper 0 %define with_sparse 0 %endif # Per-arch tweaks %ifarch %{all_x86} %define asmarch x86 %define hdrarch i386 %define pae PAE %define all_arch_configs kernel-%{version}-i?86*.config %define kernel_image arch/x86/boot/bzImage %endif %ifarch x86_64 %define asmarch x86 %define all_arch_configs kernel-%{version}-x86_64*.config %define kernel_image arch/x86/boot/bzImage %endif %ifarch %{power64} %define asmarch powerpc %define hdrarch powerpc %define make_target vmlinux %define kernel_image vmlinux %define kernel_image_elf 1 %ifarch ppc64 ppc64p7 %define all_arch_configs kernel-%{version}-ppc64*.config %endif %ifarch ppc64le %define all_arch_configs kernel-%{version}-ppc64le*.config %endif %endif %ifarch s390x %define asmarch s390 %define hdrarch s390 %define all_arch_configs kernel-%{version}-s390x.config %define make_target image %define kernel_image arch/s390/boot/image %define with_tools 0 %endif %ifarch %{arm} %define all_arch_configs kernel-%{version}-arm*.config %define asmarch arm %define hdrarch arm %define pae lpae %define make_target bzImage %define kernel_image arch/arm/boot/zImage # http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html %define kernel_mflags KALLSYMS_EXTRA_PASS=1 # we only build headers/perf/tools on the base arm arches # just like we used to only build them on i386 for x86 %ifnarch armv7hl %define with_headers 0 %define with_cross_headers 0 %define with_perf 0 %define with_tools 0 %endif %endif %ifarch aarch64 %define all_arch_configs kernel-%{version}-aarch64*.config %define asmarch arm64 %define hdrarch arm64 %define make_target Image.gz %define kernel_image arch/arm64/boot/Image.gz %endif # Should make listnewconfig fail if there's config options # printed out? %if %{nopatches} %define listnewconfig_fail 0 %else %define listnewconfig_fail 1 %endif # To temporarily exclude an architecture from being built, add it to # %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we # don't build kernel-headers then the new build system will no longer let # us use the previous build of that package -- it'll just be completely AWOL. # Which is a BadThing(tm). # We only build kernel-headers on the following... %define nobuildarches i386 s390 %ifarch %nobuildarches %define with_up 0 %define with_pae 0 %define with_debuginfo 0 %define with_perf 0 %define with_tools 0 %define _enable_debug_packages 0 %endif %define with_pae_debug 0 %if %{with_pae} %define with_pae_debug %{with_debug} %endif # Architectures we build tools/cpupower on %define cpupowerarchs %{ix86} x86_64 %{power64} %{arm} aarch64 # # Packages that need to be installed before the kernel is, because the %%post # scripts use them. # %define kernel_prereq fileutils, systemd >= 203-2, /usr/bin/kernel-install %define initrd_prereq dracut >= 027 Name: kernel-libre%{?variant} Group: System Environment/Kernel License: GPLv2 URL: http://linux-libre.fsfla.org/ Version: %{rpmversion} Release: %{pkg_release} # DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD. # SET %%nobuildarches (ABOVE) INSTEAD ExclusiveArch: noarch %{all_x86} x86_64 ppc64 ppc64p7 s390 s390x %{arm} aarch64 ppc64le ExclusiveOS: Linux %ifnarch %{nobuildarches} Requires: kernel-libre-core-uname-r = %{KVERREL}%{?variant} Requires: kernel-libre-modules-uname-r = %{KVERREL}%{?variant} %endif # # List the packages used during the kernel build # BuildRequires: kmod, patch, bash, sh-utils, tar, git BuildRequires: bzip2, xz, findutils, gzip, m4, perl, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc BuildRequires: net-tools, hostname, bc %if %{with_sparse} BuildRequires: sparse %endif %if %{with_perf} BuildRequires: elfutils-devel zlib-devel binutils-devel newt-devel python-devel perl(ExtUtils::Embed) bison flex xz-devel BuildRequires: audit-libs-devel %ifnarch s390 s390x %{arm} BuildRequires: numactl-devel %endif %endif %if %{with_tools} BuildRequires: pciutils-devel gettext ncurses-devel %endif BuildConflicts: rhbuildsys(DiskFree) < 500Mb %if %{with_debuginfo} BuildRequires: rpm-build, elfutils %define debuginfo_args --strict-build-id -r %endif %if %{signkernel}%{signmodules} BuildRequires: openssl openssl-devel %if %{signkernel} BuildRequires: pesign >= 0.10-4 %endif %endif %if %{with_cross} BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu %define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu- %endif Source0: http://linux-libre.fsfla.org/pub/linux-libre/freed-ora/src/linux%{?baselibre}-%{kversion}%{basegnu}.tar.xz # For documentation purposes only. Source3: deblob-main Source4: deblob-check Source5: deblob-%{kversion} #Source6: deblob-4.%{upstream_sublevel} Source10: perf-man-%{kversion}.tar.gz Source11: x509.genkey Source15: merge.pl Source16: mod-extra.list Source17: mod-extra.sh Source18: mod-sign.sh Source90: filter-x86_64.sh Source91: filter-armv7hl.sh Source92: filter-i686.sh Source93: filter-aarch64.sh Source95: filter-ppc64.sh Source96: filter-ppc64le.sh Source97: filter-s390x.sh Source98: filter-ppc64p7.sh Source99: filter-modules.sh %define modsign_cmd %{SOURCE18} Source19: Makefile.release Source20: Makefile.config Source21: config-debug Source22: config-nodebug Source23: config-generic Source24: config-no-extra Source30: config-x86-generic Source31: config-i686-PAE Source32: config-x86-32-generic Source40: config-x86_64-generic Source50: config-powerpc64-generic Source53: config-powerpc64 Source54: config-powerpc64p7 Source55: config-powerpc64le Source70: config-s390x Source100: config-arm-generic # Unified ARM kernels Source101: config-armv7-generic Source102: config-armv7 Source103: config-armv7-lpae Source110: config-arm64 # This file is intentionally left empty in the stock kernel. Its a nicety # added for those wanting to do custom rebuilds with altered config opts. Source1000: config-local # Sources for kernel-libre-tools Source2000: cpupower.service Source2001: cpupower.config # Here should be only the patches up to the upstream canonical Linus tree. # For a stable release kernel %if 0%{?stable_update} %if 0%{?stable_base} %define stable_patch_00 patch%{?stablelibre}-4.%{base_sublevel}.%{stable_base}%{?stablegnu}.xz Source5000: %{stable_patch_00} %endif # non-released_kernel case # These are automagically defined by the rcrev and gitrev values set up # near the top of this spec file. %else %if 0%{?rcrev} Source5000: patch%{?rcrevlibre}-4.%{upstream_sublevel}-rc%{rcrev}%{?rcrevgnu}.xz %if 0%{?gitrev} Source5001: patch%{?gitrevlibre}-4.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}%{?gitrevgnu}.xz %endif %else # pre-{base_sublevel+1}-rc1 case %if 0%{?gitrev} Source5000: patch%{?gitrevlibre}-4.%{base_sublevel}-git%{gitrev}%{?gitrevgnu}.xz %endif %endif %endif # build tweak for build ID magic, even for -vanilla Source5005: kbuild-AFTER_LINK.patch Patch07: freedo.patch %if !%{nopatches} # Git trees. # Standalone patches # http://www.spinics.net/lists/arm-kernel/msg523359.html Patch420: arm64-ACPI-parse-SPCR-table.patch # a tempory patch for QCOM hardware enablement. Will be gone by end of 2016/F-26 GA Patch421: qcom-QDF2432-tmp-errata.patch # http://www.spinics.net/lists/arm-kernel/msg490981.html Patch422: geekbox-v4-device-tree-support.patch # http://www.spinics.net/lists/linux-pci/msg53991.html # https://patchwork.kernel.org/patch/9337113/ Patch425: arm64-pcie-quirks.patch # http://www.spinics.net/lists/linux-tegra/msg26029.html Patch426: usb-phy-tegra-Add-38.4MHz-clock-table-entry.patch Patch427: ARM-OMAP4-Fix-crashes.patch Patch428: arm-revert-mmc-omap_hsmmc-Use-dma_request_chan-for-reque.patch # http://patchwork.ozlabs.org/patch/587554/ Patch430: ARM-tegra-usb-no-reset.patch Patch431: bcm2837-initial-support.patch Patch432: bcm283x-vc4-fixes.patch Patch433: AllWinner-net-emac.patch Patch434: ARM-Drop-fixed-200-Hz-timer-requirement-from-Samsung-platforms.patch Patch460: lib-cpumask-Make-CPUMASK_OFFSTACK-usable-without-deb.patch Patch466: input-kill-stupid-messages.patch Patch467: die-floppy-die.patch Patch468: no-pcspkr-modalias.patch Patch470: silence-fbcon-logo.patch Patch471: Kbuild-Add-an-option-to-enable-GCC-VTA.patch Patch472: crash-driver.patch Patch473: Add-secure_modules-call.patch Patch474: PCI-Lock-down-BAR-access-when-module-security-is-ena.patch Patch475: x86-Lock-down-IO-port-access-when-module-security-is.patch Patch476: ACPI-Limit-access-to-custom_method.patch Patch477: asus-wmi-Restrict-debugfs-interface-when-module-load.patch Patch478: Restrict-dev-mem-and-dev-kmem-when-module-loading-is.patch Patch479: acpi-Ignore-acpi_rsdp-kernel-parameter-when-module-l.patch Patch480: kexec-Disable-at-runtime-if-the-kernel-enforces-modu.patch Patch481: x86-Restrict-MSR-access-when-module-loading-is-restr.patch Patch482: Add-option-to-automatically-enforce-module-signature.patch Patch483: efi-Disable-secure-boot-if-shim-is-in-insecure-mode.patch Patch485: efi-Add-EFI_SECURE_BOOT-bit.patch Patch486: hibernate-Disable-in-a-signed-modules-environment.patch Patch487: Add-EFI-signature-data-types.patch Patch488: Add-an-EFI-signature-blob-parser-and-key-loader.patch # This doesn't apply. It seems like it could be replaced by # https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=5ac7eace2d00eab5ae0e9fdee63e38aee6001f7c # which has an explicit line about blacklisting Patch489: KEYS-Add-a-system-blacklist-keyring.patch Patch490: MODSIGN-Import-certificates-from-UEFI-Secure-Boot.patch Patch491: MODSIGN-Support-not-importing-certs-from-db.patch Patch492: Add-sysrq-option-to-disable-secure-boot-mode.patch Patch493: drm-i915-hush-check-crtc-state.patch Patch494: disable-i8042-check-on-apple-mac.patch Patch495: lis3-improve-handling-of-null-rate.patch # In theory this has been fixed so should no longer be needed, it also causes problems with aarch64 DMI, so disable to see for sure if it's fixed # Patch496: watchdog-Disable-watchdog-on-virtual-machines.patch Patch497: scsi-sd_revalidate_disk-prevent-NULL-ptr-deref.patch Patch498: criu-no-expert.patch Patch499: ath9k-rx-dma-stop-check.patch Patch500: xen-pciback-Don-t-disable-PCI_COMMAND-on-PCI-device-.patch Patch501: Input-synaptics-pin-3-touches-when-the-firmware-repo.patch Patch502: firmware-Drop-WARN-from-usermodehelper_read_trylock-.patch Patch503: drm-i915-turn-off-wc-mmaps.patch Patch508: kexec-uefi-copy-secure_boot-flag-in-boot-params.patch #CVE-2016-3134 rhbz 1317383 1317384 Patch665: netfilter-x_tables-deal-with-bogus-nextoffset-values.patch #rhbz 1200901 (There should be something better upstream at some point) Patch842: qxl-reapply-cursor-after-SetCrtc-calls.patch # From kernel list, currently in linux-next Patch845: HID-microsoft-Add-Surface-4-type-cover-pro-4-JP.patch # SELinux OverlayFS support (queued for 4.9) Patch846: security-selinux-overlayfs-support.patch #rhbz 1360688 Patch847: rc-core-fix-repeat-events.patch #ongoing complaint, full discussion delayed until ksummit/plumbers Patch849: 0001-iio-Use-event-header-from-kernel-tree.patch # CVE-2016-9083 CVE-2016-9084 rhbz 1389258 1389259 1389285 Patch850: v3-vfio-pci-Fix-integer-overflows-bitmask-check.patch #rhbz 1325354 Patch852: 0001-HID-input-ignore-System-Control-application-usages-i.patch #rhbz 1390308 Patch854: nouveau-add-maxwell-to-backlight-init.patch # CVE-2016-9755 rhbz 1400904 1400905 Patch856: 0001-netfilter-ipv6-nf_defrag-drop-mangled-skb-on-ream-er.patch # END OF PATCH DEFINITIONS %endif BuildRoot: %{_tmppath}/kernel-%{KVERREL}-root %description The kernel meta package # # This macro does requires, provides, conflicts, obsoletes for a kernel package. # %%kernel_reqprovconf # It uses any kernel__conflicts and kernel__obsoletes # macros defined above. # %define kernel_reqprovconf \ Provides: kernel = %{rpmversion}-%{pkg_release}\ Provides: kernel-libre = %{rpmversion}-%{pkg_release}\ Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:+%{1}}\ Provides: kernel-libre-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:+%{1}}\ Provides: kernel-drm-nouveau = 16\ Provides: kernel-libre-drm-nouveau = 16\ Provides: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Provides: kernel-libre-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Requires(pre): %{kernel_prereq}\ Requires(pre): %{initrd_prereq}\ %if %{with_firmware}\ Requires(pre): kernel-libre-firmware >= %{rpmversion}-%{pkg_release}\ %endif\ Requires(preun): systemd >= 200\ Conflicts: xfsprogs < 4.3.0-1\ Conflicts: xorg-x11-drv-vmmouse < 13.0.99\ %{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\ %{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\ %{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\ # We can't let RPM do the dependencies automatic because it'll then pick up\ # a correct but undesirable perl dependency from the module headers which\ # isn't required for the kernel proper to function\ AutoReq: no\ AutoProv: yes\ %{nil} The kernel-libre package is the upstream kernel without the non-Free blobs it includes by default. %package headers Summary: Header files for the Linux kernel for use by glibc Group: Development/System Obsoletes: glibc-kernheaders < 3.0-46 Provides: glibc-kernheaders = 3.0-46 %if "0%{?variant}" Obsoletes: kernel-libre-headers < %{rpmversion}-%{pkg_release} Provides: kernel-headers = %{rpmversion}-%{pkg_release} Provides: kernel-libre-headers = %{rpmversion}-%{pkg_release} %endif %description headers Kernel-headers includes the C header files that specify the interface between the Linux kernel and userspace libraries and programs. The header files define structures and constants that are needed for building most standard programs and are also needed for rebuilding the glibc package. %package cross-headers Provides: kernel-libre-cross-headers = %{rpmversion}-%{pkg_release} Summary: Header files for the Linux kernel for use by cross-glibc Group: Development/System %description cross-headers Kernel-cross-headers includes the C header files that specify the interface between the Linux kernel and userspace libraries and programs. The header files define structures and constants that are needed for building most standard programs and are also needed for rebuilding the cross-glibc package. %package firmware Summary: Firmware files used by the Linux kernel Group: Development/System License: GPLv2+ Provides: kernel-firmware = %{rpmversion}-%{pkg_release} %description firmware Kernel-firmware includes firmware files required for some devices to operate. %package bootwrapper Provides: kernel-libre-bootwrapper = %{rpmversion}-%{pkg_release} Summary: Boot wrapper files for generating combined kernel + initrd images Group: Development/System Requires: gzip binutils %description bootwrapper Kernel-bootwrapper contains the wrapper code which makes bootable "zImage" files combining both kernel and initial ramdisk. %package debuginfo-common-%{_target_cpu} Summary: Kernel source files used by %{name}-debuginfo packages Group: Development/Debug %description debuginfo-common-%{_target_cpu} This package is required by %{name}-debuginfo subpackages. It provides the kernel source files common to all builds. %if %{with_perf} %package -n perf-libre Provides: perf = %{rpmversion}-%{pkg_release} Summary: Performance monitoring for the Linux kernel Group: Development/System License: GPLv2 %description -n perf-libre This package contains the perf tool, which enables performance monitoring of the Linux kernel. %package -n perf-libre-debuginfo Provides: perf-debuginfo = %{rpmversion}-%{pkg_release} Summary: Debug information for package perf-libre Group: Development/Debug Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release} AutoReqProv: no %description -n perf-libre-debuginfo This package provides debug information for the perf package. # Note that this pattern only works right to match the .build-id # symlinks because of the trailing nonmatching alternation and # the leading .*, because of find-debuginfo.sh's buggy handling # of matching the pattern against the symlinks file. %{expand:%%global debuginfo_args %{?debuginfo_args} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/traceevent/plugins/.*|XXX' -o perf-debuginfo.list} %package -n python-perf-libre Provides: python-perf = %{rpmversion}-%{pkg_release} Summary: Python bindings for apps which will manipulate perf events Group: Development/Libraries %description -n python-perf-libre The python-perf-libre package contains a module that permits applications written in the Python programming language to use the interface to manipulate perf events. %{!?python_sitearch: %global python_sitearch %(%{__python} -c "from distutils.sysconfig import get_python_lib; print get_python_lib(1)")} %package -n python-perf-libre-debuginfo Provides: python-perf = %{rpmversion}-%{pkg_release} Summary: Debug information for package perf python bindings Group: Development/Debug Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release} AutoReqProv: no %description -n python-perf-libre-debuginfo This package provides debug information for the perf python bindings. # the python_sitearch macro should already be defined from above %{expand:%%global debuginfo_args %{?debuginfo_args} -p '.*%%{python_sitearch}/perf.so(\.debug)?|XXX' -o python-perf-debuginfo.list} %endif # with_perf %if %{with_tools} %package -n kernel-libre-tools Provides: kernel-tools = %{rpmversion}-%{pkg_release} Summary: Assortment of tools for the Linux kernel Group: Development/System License: GPLv2 Provides: cpupowerutils = 1:009-0.6.p1 Obsoletes: cpupowerutils < 1:009-0.6.p1 Provides: cpufreq-utils = 1:009-0.6.p1 Provides: cpufrequtils = 1:009-0.6.p1 Obsoletes: cpufreq-utils < 1:009-0.6.p1 Obsoletes: cpufrequtils < 1:009-0.6.p1 Obsoletes: cpuspeed < 1:1.5-16 Requires: kernel-libre-tools-libs = %{version}-%{release} %description -n kernel-libre-tools This package contains the tools/ directory from the kernel source and the supporting documentation. %package -n kernel-libre-tools-libs Provides: kernel-tools-libs = %{rpmversion}-%{pkg_release} Summary: Libraries for the kernels-tools Group: Development/System License: GPLv2 %description -n kernel-libre-tools-libs This package contains the libraries built from the tools/ directory from the kernel source. %package -n kernel-libre-tools-libs-devel Provides: kernel-tools-libs-devel = %{rpmversion}-%{pkg_release} Summary: Assortment of tools for the Linux kernel Group: Development/System License: GPLv2 Requires: kernel-libre-tools = %{version}-%{release} Provides: cpupowerutils-devel = 1:009-0.6.p1 Obsoletes: cpupowerutils-devel < 1:009-0.6.p1 Requires: kernel-libre-tools-libs = %{version}-%{release} Provides: kernel-libre-tools-devel Provides: kernel-tools-devel %description -n kernel-libre-tools-libs-devel This package contains the development files for the tools/ directory from the kernel source. %package -n kernel-libre-tools-debuginfo Provides: kernel-tools-debuginfo = %{rpmversion}-%{pkg_release} Summary: Debug information for package kernel-libre-tools Group: Development/Debug Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release} AutoReqProv: no %description -n kernel-libre-tools-debuginfo This package provides debug information for package kernel-libre-tools. # Note that this pattern only works right to match the .build-id # symlinks because of the trailing nonmatching alternation and # the leading .*, because of find-debuginfo.sh's buggy handling # of matching the pattern against the symlinks file. %{expand:%%global debuginfo_args %{?debuginfo_args} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|XXX' -o kernel-tools-debuginfo.list} %endif # with_tools # # This macro creates a kernel--debuginfo package. # %%kernel_debuginfo_package # %define kernel_debuginfo_package() \ %package %{?1:%{1}-}debuginfo\ Provides: kernel%{?1:-%{1}}-debuginfo = %{version}-%{release}\ Summary: Debug information for package %{name}%{?1:-%{1}}\ Group: Development/Debug\ Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\ Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\ AutoReqProv: no\ %description %{?1:%{1}-}debuginfo\ This package provides debug information for package %{name}%{?1:-%{1}}.\ This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\ %{expand:%%global debuginfo_args %{?debuginfo_args} -p '/.*/%%{KVERREL}%{?1:[+]%{1}}/.*|/.*%%{KVERREL}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\ %{nil} # # This macro creates a kernel--devel package. # %%kernel_devel_package # %define kernel_devel_package() \ %package %{?1:%{1}-}devel\ Provides: kernel%{?1:-%{1}}-devel = %{version}-%{release}\ Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\ Group: System Environment/Kernel\ Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\ Provides: kernel-libre%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\ Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-libre-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-devel = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-libre-devel = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-devel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Provides: kernel-libre-devel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Provides: installonlypkg(kernel)\ Provides: installonlypkg(kernel-libre)\ AutoReqProv: no\ Requires(pre): /usr/bin/find\ Requires: perl\ %description %{?1:%{1}-}devel\ This package provides kernel headers and makefiles sufficient to build modules\ against the %{?2:%{2} }kernel package.\ %{nil} # # This macro creates a kernel--modules-extra package. # %%kernel_modules_extra_package # %define kernel_modules_extra_package() \ %package %{?1:%{1}-}modules-extra\ Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}\ Summary: Extra kernel modules to match the %{?2:%{2} }kernel\ Group: System Environment/Kernel\ Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\ Provides: kernel-libre%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\ Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-libre%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-libre%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\ Provides: installonlypkg(kernel-module)\ Provides: installonlypkg(kernel-libre-module)\ Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Provides: kernel-libre%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Requires: kernel-libre-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Requires: kernel-libre%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ AutoReq: no\ AutoProv: yes\ %description %{?1:%{1}-}modules-extra\ This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\ %{nil} # # This macro creates a kernel--modules package. # %%kernel_modules_package # %define kernel_modules_package() \ %package %{?1:%{1}-}modules\ Provides: kernel%{?1:-%{1}}-modules = %{version}-%{release}\ Summary: kernel modules to match the %{?2:%{2}-}core kernel\ Group: System Environment/Kernel\ Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\ Provides: kernel-libre%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\ Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-libre-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-libre-modules = %{version}-%{release}%{?1:+%{1}}\ Provides: installonlypkg(kernel-module)\ Provides: installonlypkg(kernel-libre-module)\ Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Provides: kernel-libre%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Requires: kernel-libre-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ AutoReq: no\ AutoProv: yes\ %description %{?1:%{1}-}modules\ This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\ %{nil} # # this macro creates a kernel- meta package. # %%kernel_meta_package # %define kernel_meta_package() \ %package %{1}\ Provides: kernel-%{1} = %{KVERREL}+%{1}\ summary: kernel meta-package for the %{1} kernel\ group: system environment/kernel\ Requires: kernel-libre-%{1}-core-uname-r = %{KVERREL}%{?variant}+%{1}\ Requires: kernel-libre-%{1}-modules-uname-r = %{KVERREL}%{?variant}+%{1}\ %description %{1}\ The meta-package for the %{1} kernel\ %{nil} # # This macro creates a kernel- and its -devel and -debuginfo too. # %%define variant_summary The Linux kernel compiled for # %%kernel_variant_package [-n ] # %define kernel_variant_package(n:) \ %package %{?1:%{1}-}core\ Provides: kernel-%{?1:%{1}-}core = %{KVERREL}%{?1:+%{1}}\ Summary: %{variant_summary}\ Group: System Environment/Kernel\ Provides: kernel-libre-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ %{expand:%%kernel_reqprovconf}\ %if %{?1:1} %{!?1:0} \ %{expand:%%kernel_meta_package %{?1:%{1}}}\ %endif\ %{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ %{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ %{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ %{expand:%%kernel_debuginfo_package %{?1:%{1}}}\ %{nil} # Now, each variant package. %ifnarch armv7hl %define variant_summary The Linux kernel compiled for PAE capable machines %kernel_variant_package %{pae} %description %{pae}-core This package includes a version of the Linux kernel with support for up to 64GB of high memory. It requires a CPU with Physical Address Extensions (PAE). The non-PAE kernel can only address up to 4GB of memory. Install the kernel-PAE package if your machine has more than 4GB of memory. %else %define variant_summary The Linux kernel compiled for Cortex-A15 %kernel_variant_package %{pae} %description %{pae}-core This package includes a version of the Linux kernel with support for Cortex-A15 devices with LPAE and HW virtualisation support %endif The kernel-libre-PAE package is the upstream kernel without the non-Free blobs it includes by default. %define variant_summary The Linux kernel compiled with extra debugging enabled for PAE capable machines %kernel_variant_package %{pae}debug Obsoletes: kernel-PAE-debug %description %{pae}debug-core This package includes a version of the Linux kernel with support for up to 64GB of high memory. It requires a CPU with Physical Address Extensions (PAE). The non-PAE kernel can only address up to 4GB of memory. Install the kernel-PAE package if your machine has more than 4GB of memory. This variant of the kernel has numerous debugging options enabled. It should only be installed when trying to gather additional information on kernel bugs, as some of these options impact performance noticably. The kernel-libre-PAEdebug package is the upstream kernel without the non-Free blobs it includes by default. %define variant_summary The Linux kernel compiled with extra debugging enabled %kernel_variant_package debug %description debug-core The kernel package contains the Linux kernel (vmlinuz), the core of any GNU/Linux operating system. The kernel handles the basic functions of the operating system: memory allocation, process allocation, device input and output, etc. This variant of the kernel has numerous debugging options enabled. It should only be installed when trying to gather additional information on kernel bugs, as some of these options impact performance noticably. The kernel-libre-debug package is the upstream kernel without the non-Free blobs it includes by default. # And finally the main -core package %define variant_summary The Linux kernel %kernel_variant_package %description core The kernel package contains the Linux kernel (vmlinuz), the core of any GNU/Linux operating system. The kernel handles the basic functions of the operating system: memory allocation, process allocation, device input and output, etc. The kernel-libre package is the upstream kernel without the non-Free blobs it includes by default. %prep # do a few sanity-checks for --with *only builds %if %{with_baseonly} %if !%{with_up}%{with_pae} echo "Cannot build --with baseonly, up build is disabled" exit 1 %endif %endif %if "%{baserelease}" == "0" echo "baserelease must be greater than zero" exit 1 %endif # more sanity checking; do it quietly if [ "%{patches}" != "%%{patches}" ] ; then for patch in %{patches} ; do if [ ! -f $patch ] ; then echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing" exit 1 fi done fi 2>/dev/null patch_command='patch -p1 -F1 -s' ApplyPatch() { local patch=$1 shift if [ ! -f $RPM_SOURCE_DIR/$patch ]; then exit 1 fi if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME%%%%-libre%{?variant}}.spec ; then if [ "${patch:0:8}" != "patch-4." ] && [ "${patch:0:14}" != "patch-libre-4." ] ; then echo "ERROR: Patch $patch not listed as a source patch in specfile" exit 1 fi fi 2>/dev/null case $patch in patch*-gnu*-gnu*) ;; *) $RPM_SOURCE_DIR/deblob-check $RPM_SOURCE_DIR/$patch || exit 1 ;; esac case "$patch" in *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;; *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;; *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;; *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;; esac } # don't apply patch if it's empty ApplyOptionalPatch() { local patch=$1 shift if [ ! -f $RPM_SOURCE_DIR/$patch ]; then exit 1 fi local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}') if [ "$C" -gt 9 ]; then ApplyPatch $patch ${1+"$@"} fi } # we don't want a .config file when building firmware: it just confuses the build system %define build_firmware \ make INSTALL_FW_PATH=$RPM_BUILD_ROOT/lib/firmware firmware_install \ # First we unpack the kernel tarball. # If this isn't the first make prep, we use links to the existing clean tarball # which speeds things up quite a bit. # Update to latest upstream. %if 0%{?released_kernel} %define vanillaversion 4.%{base_sublevel} # non-released_kernel case %else %if 0%{?rcrev} %define vanillaversion 4.%{upstream_sublevel}-rc%{rcrev} %if 0%{?gitrev} %define vanillaversion 4.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev} %endif %else # pre-{base_sublevel+1}-rc1 case %if 0%{?gitrev} %define vanillaversion 4.%{base_sublevel}-git%{gitrev} %else %define vanillaversion 4.%{base_sublevel} %endif %endif %endif # %%{vanillaversion} : the full version name, e.g. 2.6.35-rc6-git3 # %%{kversion} : the base version, e.g. 2.6.34 # Use kernel-%%{kversion}%%{?dist} as the top-level directory name # so we can prep different trees within a single git directory. # Build a list of the other top-level kernel tree directories. # This will be used to hardlink identical vanilla subdirs. sharedirs=$(find "$PWD" -maxdepth 1 -type d -name 'kernel-4.*' \ | grep -x -v "$PWD"/kernel-%{kversion}%{?dist}) ||: # Delete all old stale trees. if [ -d kernel-%{kversion}%{?dist} ]; then cd kernel-%{kversion}%{?dist} for i in linux-* do if [ -d $i ]; then # Just in case we ctrl-c'd a prep already rm -rf deleteme.%{_target_cpu} # Move away the stale away, and delete in background. mv $i deleteme-$i rm -rf deleteme* & fi done cd .. fi # Generate new tree if [ ! -d kernel-%{kversion}%{?dist}/vanilla-%{vanillaversion} ]; then if [ -d kernel-%{kversion}%{?dist}/vanilla-%{kversion} ]; then # The base vanilla version already exists. cd kernel-%{kversion}%{?dist} # Any vanilla-* directories other than the base one are stale. for dir in vanilla-*; do [ "$dir" = vanilla-%{kversion} ] || rm -rf $dir & done else rm -f pax_global_header # Look for an identical base vanilla dir that can be hardlinked. for sharedir in $sharedirs ; do if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then break fi done if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then %setup -q -n kernel-%{kversion}%{?dist} -c -T cp -al $sharedir/vanilla-%{kversion} . else %setup -q -n kernel-%{kversion}%{?dist} -c mv linux-%{kversion} vanilla-%{kversion} fi fi perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION =%{?stablelibre: }%{?stablegnux}/" vanilla-%{kversion}/Makefile %if "%{kversion}" != "%{vanillaversion}" for sharedir in $sharedirs ; do if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then break fi done if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then cp -al $sharedir/vanilla-%{vanillaversion} . else # Need to apply patches to the base vanilla version. cp -al vanilla-%{kversion} vanilla-%{vanillaversion} cd vanilla-%{vanillaversion} # Update vanilla to the latest upstream. # (non-released_kernel case only) %if 0%{?rcrev} %if "%{?stablelibre}" != "%{?rcrevlibre}" perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION =%{?rcrevlibre: }%{?rcrevgnux}/" Makefile %endif xzcat %{SOURCE5000} | patch -p1 -F1 -s %if 0%{?gitrev} perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -rc%{rcrev}%{?gitrevgnux}/" Makefile xzcat %{SOURCE5001} | patch -p1 -F1 -s %endif %else # pre-{base_sublevel+1}-rc1 case %if "%{?stablelibre}" != "%{?gitrevlibre}" perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION =%{?gitrevlibre: }%{?gitrevgnux}/" Makefile %endif %if 0%{?gitrev} xzcat %{SOURCE5000} | patch -p1 -F1 -s %endif %endif git init git config user.email "kernel-team@fedoraproject.org" git config user.name "Fedora Kernel Team" git config gc.auto 0 git add . git commit -a -q -m "baseline" cd .. fi %endif else # We already have all vanilla dirs, just change to the top-level directory. cd kernel-%{kversion}%{?dist} fi # Now build the fedora kernel tree. cp -al vanilla-%{vanillaversion} linux-%{KVERREL} cd linux-%{KVERREL} if [ ! -d .git ]; then git init git config user.email "kernel-team@fedoraproject.org" git config user.name "Fedora Kernel Team" git config gc.auto 0 git add . git commit -a -q -m "baseline" fi # released_kernel with possible stable updates %if 0%{?stable_base} # This is special because the kernel spec is hell and nothing is consistent xzcat %{SOURCE5000} | patch -p1 -F1 -s git commit -a -m "Stable update" %endif # Drop some necessary files from the source dir into the buildroot cp $RPM_SOURCE_DIR/config-* . cp %{SOURCE15} . %if !%{debugbuildsenabled} %if %{with_release} # The normal build is a really debug build and the user has explicitly requested # a release kernel. Change the config files into non-debug versions. make -f %{SOURCE19} config-release %endif %endif # Dynamically generate kernel .config files from config-* files make -f %{SOURCE20} VERSION=%{version} configs # Merge in any user-provided local config option changes %ifnarch %nobuildarches for i in %{all_arch_configs} do mv $i $i.tmp ./merge.pl %{SOURCE1000} $i.tmp > $i rm $i.tmp done %endif # The kbuild-AFTER_LINK patch is needed regardless so we list it as a Source # file and apply it separately from the rest. $RPM_SOURCE_DIR/deblob-check %{SOURCE5005} || exit 1 git am %{SOURCE5005} %if !%{nopatches} $RPM_SOURCE_DIR/deblob-check %{patches} || exit 1 git am %{patches} # END OF PATCH APPLICATIONS %endif # Any further pre-build tree manipulations happen here. chmod +x scripts/checkpatch.pl # This Prevents scripts/setlocalversion from mucking with our version numbers. touch .scmversion # only deal with configs if we are going to build for the arch %ifnarch %nobuildarches mkdir configs %if !%{debugbuildsenabled} rm -f kernel-%{version}-*debug.config %endif %define make make %{?cross_opts} # now run oldconfig over all the config files for i in *.config do mv $i .config Arch=`head -1 .config | cut -b 3-` make ARCH=$Arch listnewconfig | grep -E '^CONFIG_' >.newoptions || true %if %{listnewconfig_fail} if [ -s .newoptions ]; then cat .newoptions exit 1 fi %endif rm -f .newoptions make ARCH=$Arch oldnoconfig echo "# $Arch" > configs/$i cat .config >> configs/$i done # end of kernel config %endif # get rid of unwanted files resulting from patch fuzz find . \( -name "*.orig" -o -name "*~" \) -exec rm -f {} \; >/dev/null # remove unnecessary SCM files find . -name .gitignore -exec rm -f {} \; >/dev/null cd .. ### ### build ### %build %if %{with_sparse} %define sparse_mflags C=1 %endif %if %{with_debuginfo} # This override tweaks the kernel makefiles so that we run debugedit on an # object before embedding it. When we later run find-debuginfo.sh, it will # run debugedit again. The edits it does change the build ID bits embedded # in the stripped object, but repeating debugedit is a no-op. We do it # beforehand to get the proper final build ID bits into the embedded image. # This affects the vDSO images in vmlinux, and the vmlinux image in bzImage. export AFTER_LINK=\ 'sh -xc "/usr/lib/rpm/debugedit -b $$RPM_BUILD_DIR -d /usr/src/debug \ -i $@ > $@.id"' %endif cp_vmlinux() { eu-strip --remove-comment -o "$2" "$1" } BuildKernel() { MakeTarget=$1 KernelImage=$2 Flavour=$3 Flav=${Flavour:++${Flavour}} InstallName=${4:-vmlinuz} # Pick the right config file for the kernel we're building Config=kernel-%{version}-%{_target_cpu}${Flavour:+-${Flavour}}.config DevelDir=/usr/src/kernels/%{KVERREL}${Flav} # When the bootable image is just the ELF kernel, strip it. # We already copy the unstripped file into the debuginfo package. if [ "$KernelImage" = vmlinux ]; then CopyKernel=cp_vmlinux else CopyKernel=cp fi KernelVer=%{version}-libre.%{release}.%{_target_cpu}${Flav} echo BUILDING A KERNEL FOR ${Flavour} %{_target_cpu}... %if 0%{?stable_update} # make sure SUBLEVEL is incremented on a stable release. Sigh 3.x. perl -p -i -e "s/^SUBLEVEL.*/SUBLEVEL = %{?stablerev}/" Makefile %endif # make sure EXTRAVERSION says what we want it to say perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -libre.%{release}.%{_target_cpu}${Flav}/" Makefile # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme %if !0%{?rcrev} %if 0%{?gitrev} perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{upstream_sublevel}/' Makefile %endif %endif # and now to start the build process make -s mrproper cp configs/$Config .config %if %{signkernel}%{signmodules} cp %{SOURCE11} certs/. %endif Arch=`head -1 .config | cut -b 3-` echo USING ARCH=$Arch make -s ARCH=$Arch oldnoconfig >/dev/null %{make} -s ARCH=$Arch V=1 %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags} %{make} -s ARCH=$Arch V=1 %{?_smp_mflags} modules %{?sparse_mflags} || exit 1 mkdir -p $RPM_BUILD_ROOT/%{image_install_path} mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer %if %{with_debuginfo} mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path} %endif %ifarch %{arm} aarch64 %{make} -s ARCH=$Arch V=1 dtbs dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb find arch/$Arch/boot/dts -name '*.dtb' -type f | xargs rm -f %endif # Start installing the results install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map # We estimate the size of the initramfs because rpm needs to take this size # into consideration when performing disk space calculations. (See bz #530778) dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20 if [ -f arch/$Arch/boot/zImage.stub ]; then cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || : cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || : fi %if %{signkernel} # Sign the image if we're using EFI %pesign -s -i $KernelImage -o vmlinuz.signed if [ ! -s vmlinuz.signed ]; then echo "pesigning failed" exit 1 fi mv vmlinuz.signed $KernelImage %endif $CopyKernel $KernelImage \ $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName # hmac sign the kernel for FIPS echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac" ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer sha512hmac $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer | sed -e "s,$RPM_BUILD_ROOT,," > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac; cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac # Override $(mod-fw) because we don't want it to install any firmware # we'll get it from the linux-firmware package and we don't want conflicts %{make} -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_install KERNELRELEASE=$KernelVer mod-fw= %ifarch %{vdso_arches} %{make} -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer if [ ! -s ldconfig-kernel.conf ]; then echo > ldconfig-kernel.conf "\ # Placeholder file, no vDSO hwcap entries used in this kernel." fi %{__install} -D -m 444 ldconfig-kernel.conf \ $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id %endif # And save the headers/makefiles etc for building modules against # # This all looks scary, but the end result is supposed to be: # * all arch relevant include/ files # * all Makefile/Kconfig files # * all script/ files rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source) # dirs for additional modules per module-init-tools, kbuild/modules.txt mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/extra mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates # first copy everything cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build if [ -s Module.markers ]; then cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build fi # then drop all but the needed Makefiles/Kconfig files rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Documentation rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build if [ -f tools/objtool/objtool ]; then cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || : fi if [ -d arch/$Arch/scripts ]; then cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || : fi if [ -f arch/$Arch/*lds ]; then cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || : fi rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*.o rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*/*.o %ifarch %{power64} cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif if [ -d arch/%{asmarch}/include ]; then cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ fi %ifarch aarch64 # arch/arm64/include/asm/xen references arch/arm cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ # arch/arm64/include/asm/opcodes.h references arch/arm cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif # include the machine specific headers for ARM variants, if available. %ifarch %{arm} if [ -d arch/%{asmarch}/mach-${Flavour}/include ]; then cp -a --parents arch/%{asmarch}/mach-${Flavour}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ fi # include a few files for 'make prepare' cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include %ifarch %{ix86} x86_64 # files for 'make prepare' to succeed with kernel-devel cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/entry/syscalls/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/entry/syscalls/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/sha256.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/sha256.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif # Make sure the Makefile and version.h have a matching timestamp so that # external modules can be built touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h # Copy .config to include/config/auto.conf so "make prepare" is unnecessary. cp $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf %if %{with_debuginfo} if test -s vmlinux.id; then cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id else echo >&2 "*** ERROR *** no vmlinux build ID! ***" exit 1 fi # # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm # mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer %endif find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames # mark modules executable so that strip-to-file can strip them xargs --no-run-if-empty chmod u+x < modnames # Generate a list of modules for block and networking. grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA | sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef collect_modules_list() { sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef | LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1 if [ ! -z "$3" ]; then sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1 fi } collect_modules_list networking \ 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice' collect_modules_list block \ 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko' collect_modules_list drm \ 'drm_open|drm_init' collect_modules_list modesetting \ 'drm_crtc_init' # detect missing or incorrect license tags ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \ grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1 # remove files that will be auto generated by depmod at rpm -i time pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/ rm -f modules.{alias*,builtin.bin,dep*,*map,symbols*,devname,softdep} popd # Call the modules-extra script to move things around %{SOURCE17} $RPM_BUILD_ROOT/lib/modules/$KernelVer %{SOURCE16} # # Generate the kernel-core and kernel-modules files lists # # Copy the System.map file for depmod to use, and create a backup of the # full module tree so we can restore it after we're done filtering cp System.map $RPM_BUILD_ROOT/. pushd $RPM_BUILD_ROOT mkdir restore cp -r lib/modules/$KernelVer/* restore/. # don't include anything going into k-m-e in the file lists rm -rf lib/modules/$KernelVer/extra # Find all the module files and filter them out into the core and modules # lists. This actually removes anything going into -modules from the dir. find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list cp $RPM_SOURCE_DIR/filter-*.sh . %{SOURCE99} modules.list %{_target_cpu} rm filter-*.sh # Run depmod on the resulting module tree and make sure it isn't broken depmod -b . -aeF ./System.map $KernelVer &> depmod.out if [ -s depmod.out ]; then echo "Depmod failure" cat depmod.out exit 1 else rm depmod.out fi # remove files that will be auto generated by depmod at rpm -i time pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/ rm -f modules.{alias*,builtin.bin,dep*,*map,symbols*,devname,softdep} popd # Go back and find all of the various directories in the tree. We use this # for the dir lists in kernel-core find lib/modules/$KernelVer/kernel -type d | sort -n > module-dirs.list # Cleanup rm System.map cp -r restore/* lib/modules/$KernelVer/. rm -rf restore popd # Make sure the files lists start with absolute paths or rpmbuild fails. # Also add in the dir entries sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Flavour:+-${Flavour}}-modules.list sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Flavour:+-${Flavour}}-core.list sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Flavour:+-${Flavour}}-core.list # Cleanup rm -f $RPM_BUILD_ROOT/k-d.list rm -f $RPM_BUILD_ROOT/modules.list rm -f $RPM_BUILD_ROOT/module-dirs.list %if %{signmodules} # Save the signing keys so we can sign the modules in __modsign_install_post cp certs/signing_key.pem certs/signing_key.pem.sign${Flav} cp certs/signing_key.x509 certs/signing_key.x509.sign${Flav} %endif # Move the devel headers out of the root file system mkdir -p $RPM_BUILD_ROOT/usr/src/kernels mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir # This is going to create a broken link during the build, but we don't use # it after this point. We need the link to actually point to something # when kernel-devel is installed, and a relative link doesn't work across # the F17 UsrMove feature. ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build # prune junk from kernel-devel find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -exec rm -f {} \; } ### # DO it... ### # prepare directories rm -rf $RPM_BUILD_ROOT mkdir -p $RPM_BUILD_ROOT/boot mkdir -p $RPM_BUILD_ROOT%{_libexecdir} cd linux-%{KVERREL} %if %{with_debug} BuildKernel %make_target %kernel_image debug %endif %if %{with_pae_debug} BuildKernel %make_target %kernel_image %{pae}debug %endif %if %{with_pae} BuildKernel %make_target %kernel_image %{pae} %endif %if %{with_up} BuildKernel %make_target %kernel_image %endif %global perf_make \ make -s EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} %{?_smp_mflags} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 prefix=%{_prefix} %if %{with_perf} # perf %{perf_make} DESTDIR=$RPM_BUILD_ROOT all %endif %if %{with_tools} %ifarch %{cpupowerarchs} # cpupower # make sure version-gen.sh is executable. chmod +x tools/power/cpupower/utils/version-gen.sh %{make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false %ifarch %{ix86} pushd tools/power/cpupower/debug/i386 %{make} %{?_smp_mflags} centrino-decode powernow-k8-decode popd %endif %ifarch x86_64 pushd tools/power/cpupower/debug/x86_64 %{make} %{?_smp_mflags} centrino-decode powernow-k8-decode popd %endif %ifarch %{ix86} x86_64 pushd tools/power/x86/x86_energy_perf_policy/ %{make} popd pushd tools/power/x86/turbostat %{make} popd %endif #turbostat/x86_energy_perf_policy %endif pushd tools/thermal/tmon/ %{make} popd %endif # In the modsign case, we do 3 things. 1) We check the "flavour" and hard # code the value in the following invocations. This is somewhat sub-optimal # but we're doing this inside of an RPM macro and it isn't as easy as it # could be because of that. 2) We restore the .tmp_versions/ directory from # the one we saved off in BuildKernel above. This is to make sure we're # signing the modules we actually built/installed in that flavour. 3) We # grab the arch and invoke mod-sign.sh command to actually sign the modules. # # We have to do all of those things _after_ find-debuginfo runs, otherwise # that will strip the signature off of the modules. %define __modsign_install_post \ if [ "%{signmodules}" -eq "1" ]; then \ if [ "%{with_pae}" -ne "0" ]; then \ %{modsign_cmd} certs/signing_key.pem.sign+%{pae} certs/signing_key.x509.sign+%{pae} $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+%{pae}/ \ fi \ if [ "%{with_debug}" -ne "0" ]; then \ %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \ fi \ if [ "%{with_pae_debug}" -ne "0" ]; then \ %{modsign_cmd} certs/signing_key.pem.sign+%{pae}debug certs/signing_key.x509.sign+%{pae}debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+%{pae}debug/ \ fi \ if [ "%{with_up}" -ne "0" ]; then \ %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \ fi \ fi \ if [ "%{zipmodules}" -eq "1" ]; then \ find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs xz; \ fi \ %{nil} ### ### Special hacks for debuginfo subpackages. ### # This macro is used by %%install, so we must redefine it before that. %define debug_package %{nil} %if %{with_debuginfo} %define __debug_install_post \ /usr/lib/rpm/find-debuginfo.sh %{debuginfo_args} %{_builddir}/%{?buildsubdir}\ %{nil} %ifnarch noarch %global __debug_package 1 %files -f debugfiles.list debuginfo-common-%{_target_cpu} %defattr(-,root,root) %endif %endif # # Disgusting hack alert! We need to ensure we sign modules *after* all # invocations of strip occur, which is in __debug_install_post if # find-debuginfo.sh runs, and __os_install_post if not. # %define __spec_install_post \ %{?__debug_package:%{__debug_install_post}}\ %{__arch_install_post}\ %{__os_install_post}\ %{__modsign_install_post} ### ### install ### %install cd linux-%{KVERREL} # We have to do the headers install before the tools install because the # kernel headers_install will remove any header files in /usr/include that # it doesn't install itself. %if %{with_headers} # Install kernel headers make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install find $RPM_BUILD_ROOT/usr/include \ \( -name .install -o -name .check -o \ -name ..install.cmd -o -name ..check.cmd \) | xargs rm -f %endif %if %{with_cross_headers} mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers headers_install_all find $RPM_BUILD_ROOT/usr/tmp-headers/include \ \( -name .install -o -name .check -o \ -name ..install.cmd -o -name ..check.cmd \) | xargs rm -f # Copy all the architectures we care about to their respective asm directories for arch in arm arm64 powerpc s390 x86 ; do mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include mv $RPM_BUILD_ROOT/usr/tmp-headers/include/asm-${arch} $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/asm cp -a $RPM_BUILD_ROOT/usr/tmp-headers/include/asm-generic $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/. done # Remove the rest of the architectures rm -rf $RPM_BUILD_ROOT/usr/tmp-headers/include/arch* rm -rf $RPM_BUILD_ROOT/usr/tmp-headers/include/asm-* # Copy the rest of the headers over for arch in arm arm64 powerpc s390 x86 ; do cp -a $RPM_BUILD_ROOT/usr/tmp-headers/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/. done rm -rf $RPM_BUILD_ROOT/usr/tmp-headers %endif %if %{with_perf} # perf tool binary and supporting scripts/binaries %{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin install-traceevent-plugins # remove the 'trace' symlink. rm -f %{buildroot}%{_bindir}/trace # remove the perf-tips rm -rf %{buildroot}%{_docdir}/perf-tip # python-perf extension %{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext # perf man pages (note: implicit rpm magic compresses them later) mkdir -p %{buildroot}/%{_mandir}/man1 pushd %{buildroot}/%{_mandir}/man1 tar -xf %{SOURCE10} popd %endif %if %{with_tools} %ifarch %{cpupowerarchs} %{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install rm -f %{buildroot}%{_libdir}/*.{a,la} %find_lang cpupower mv cpupower.lang ../ %ifarch %{ix86} pushd tools/power/cpupower/debug/i386 install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode popd %endif %ifarch x86_64 pushd tools/power/cpupower/debug/x86_64 install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode popd %endif chmod 0755 %{buildroot}%{_libdir}/libcpupower.so* mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower %endif %ifarch %{ix86} x86_64 mkdir -p %{buildroot}%{_mandir}/man8 pushd tools/power/x86/x86_energy_perf_policy make DESTDIR=%{buildroot} install popd pushd tools/power/x86/turbostat make DESTDIR=%{buildroot} install popd %endif #turbostat/x86_energy_perf_policy pushd tools/thermal/tmon make INSTALL_ROOT=%{buildroot} install popd %endif %if %{with_firmware} %{build_firmware} %endif %if %{with_bootwrapper} make DESTDIR=$RPM_BUILD_ROOT bootwrapper_install WRAPPER_OBJDIR=%{_libdir}/kernel-wrapper WRAPPER_DTSDIR=%{_libdir}/kernel-wrapper/dts %endif ### ### clean ### %clean rm -rf $RPM_BUILD_ROOT ### ### scripts ### %if %{with_tools} %post -n kernel-libre-tools-libs /sbin/ldconfig %postun -n kernel-libre-tools-libs /sbin/ldconfig %endif # # This macro defines a %%post script for a kernel*-devel package. # %%kernel_devel_post [] # %define kernel_devel_post() \ %{expand:%%post %{?1:%{1}-}devel}\ if [ -f /etc/sysconfig/kernel ]\ then\ . /etc/sysconfig/kernel || exit $?\ fi\ if [ "$HARDLINK" != "no" -a -x /usr/sbin/hardlink ]\ then\ (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\ /usr/bin/find . -type f | while read f; do\ hardlink -c /usr/src/kernels/*.fc*.*/$f $f\ done)\ fi\ %{nil} # # This macro defines a %%post script for a kernel*-modules-extra package. # It also defines a %%postun script that does the same thing. # %%kernel_modules_extra_post [] # %define kernel_modules_extra_post() \ %{expand:%%post %{?1:%{1}-}modules-extra}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil}\ %{expand:%%postun %{?1:%{1}-}modules-extra}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil} # # This macro defines a %%post script for a kernel*-modules package. # It also defines a %%postun script that does the same thing. # %%kernel_modules_post [] # %define kernel_modules_post() \ %{expand:%%post %{?1:%{1}-}modules}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil}\ %{expand:%%postun %{?1:%{1}-}modules}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil} # This macro defines a %%posttrans script for a kernel package. # %%kernel_variant_posttrans [] # More text can follow to go at the end of this variant's %%post. # %define kernel_variant_posttrans() \ %{expand:%%posttrans %{?1:%{1}-}core}\ /bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\ %{nil} # # This macro defines a %%post script for a kernel package and its devel package. # %%kernel_variant_post [-v ] [-r ] # More text can follow to go at the end of this variant's %%post. # %define kernel_variant_post(v:r:) \ %{expand:%%kernel_devel_post %{?-v*}}\ %{expand:%%kernel_modules_post %{?-v*}}\ %{expand:%%kernel_modules_extra_post %{?-v*}}\ %{expand:%%kernel_variant_posttrans %{?-v*}}\ %{expand:%%post %{?-v*:%{-v*}-}core}\ %{-r:\ if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\ [ -f /etc/sysconfig/kernel ]; then\ /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel-libre%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\ fi}\ %{nil} # # This macro defines a %%preun script for a kernel package. # %%kernel_variant_preun # %define kernel_variant_preun() \ %{expand:%%preun %{?1:%{1}-}core}\ /bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\ %{nil} %kernel_variant_preun %kernel_variant_post -r kernel-smp %kernel_variant_preun %{pae} %kernel_variant_post -v %{pae} -r (kernel|kernel-smp) %kernel_variant_post -v %{pae}debug -r (kernel|kernel-smp) %kernel_variant_preun %{pae}debug %kernel_variant_preun debug %kernel_variant_post -v debug if [ -x /sbin/ldconfig ] then /sbin/ldconfig -X || exit $? fi ### ### file lists ### %if %{with_headers} %files headers %defattr(-,root,root) /usr/include/* %endif %if %{with_cross_headers} %files cross-headers %defattr(-,root,root) /usr/*-linux-gnu/include/* %endif %if %{with_firmware} %files firmware %defattr(-,root,root) /lib/firmware/* %doc linux-%{KVERREL}/firmware/WHENCE %endif %if %{with_bootwrapper} %files bootwrapper %defattr(-,root,root) /usr/sbin/* %{_libdir}/kernel-wrapper %endif %if %{with_perf} %files -n perf-libre %defattr(-,root,root) %{_bindir}/perf %dir %{_libdir}/traceevent/plugins %{_libdir}/traceevent/plugins/* %dir %{_libexecdir}/perf-core %{_libexecdir}/perf-core/* %{_datadir}/perf-core/* %{_mandir}/man[1-8]/perf* %{_sysconfdir}/bash_completion.d/perf %doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt %files -n python-perf-libre %defattr(-,root,root) %{python_sitearch} %if %{with_debuginfo} %files -f perf-debuginfo.list -n perf-libre-debuginfo %defattr(-,root,root) %files -f python-perf-debuginfo.list -n python-perf-libre-debuginfo %defattr(-,root,root) %endif %endif # with_perf %if %{with_tools} %files -n kernel-libre-tools -f cpupower.lang %defattr(-,root,root) %ifarch %{cpupowerarchs} %{_bindir}/cpupower %ifarch %{ix86} x86_64 %{_bindir}/centrino-decode %{_bindir}/powernow-k8-decode %endif %{_unitdir}/cpupower.service %{_mandir}/man[1-8]/cpupower* %config(noreplace) %{_sysconfdir}/sysconfig/cpupower %ifarch %{ix86} x86_64 %{_bindir}/x86_energy_perf_policy %{_mandir}/man8/x86_energy_perf_policy* %{_bindir}/turbostat %{_mandir}/man8/turbostat* %endif %{_bindir}/tmon %endif %if %{with_debuginfo} %files -f kernel-tools-debuginfo.list -n kernel-libre-tools-debuginfo %defattr(-,root,root) %endif %ifarch %{cpupowerarchs} %files -n kernel-libre-tools-libs %{_libdir}/libcpupower.so.0 %{_libdir}/libcpupower.so.0.0.1 %files -n kernel-libre-tools-libs-devel %{_libdir}/libcpupower.so %{_includedir}/cpufreq.h %endif %endif # with_perf %ifnarch noarch # empty meta-package %files %defattr(-,root,root) %endif # This is %%{image_install_path} on an arch where that includes ELF files, # or empty otherwise. %define elf_image_install_path %{?kernel_image_elf:%{image_install_path}} # # This macro defines the %%files sections for a kernel package # and its devel and debuginfo packages. # %%kernel_variant_files [-k vmlinux] # %define kernel_variant_files(k:) \ %if %{1}\ %{expand:%%files -f kernel-%{?2:%{2}-}core.list %{?2:%{2}-}core}\ %defattr(-,root,root)\ %{!?_licensedir:%global license %%doc}\ %license linux-%{KVERREL}/COPYING\ /lib/modules/%{KVERREL}%{?2:+%{2}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\ %ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?2:+%{2}}\ /lib/modules/%{KVERREL}%{?2:+%{2}}/.vmlinuz.hmac \ %ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?2:+%{2}}.hmac \ %ifarch %{arm} aarch64\ /lib/modules/%{KVERREL}%{?2:+%{2}}/dtb \ %ghost /%{image_install_path}/dtb-%{KVERREL}%{?2:+%{2}} \ %endif\ %attr(600,root,root) /lib/modules/%{KVERREL}%{?2:+%{2}}/System.map\ %ghost /boot/System.map-%{KVERREL}%{?2:+%{2}}\ /lib/modules/%{KVERREL}%{?2:+%{2}}/config\ %ghost /boot/config-%{KVERREL}%{?2:+%{2}}\ %ghost /boot/initramfs-%{KVERREL}%{?2:+%{2}}.img\ %dir /lib/modules\ %dir /lib/modules/%{KVERREL}%{?2:+%{2}}\ %dir /lib/modules/%{KVERREL}%{?2:+%{2}}/kernel\ /lib/modules/%{KVERREL}%{?2:+%{2}}/build\ /lib/modules/%{KVERREL}%{?2:+%{2}}/source\ /lib/modules/%{KVERREL}%{?2:+%{2}}/updates\ %ifarch %{vdso_arches}\ /lib/modules/%{KVERREL}%{?2:+%{2}}/vdso\ /etc/ld.so.conf.d/kernel-%{KVERREL}%{?2:+%{2}}.conf\ %endif\ /lib/modules/%{KVERREL}%{?2:+%{2}}/modules.*\ %{expand:%%files -f kernel-%{?2:%{2}-}modules.list %{?2:%{2}-}modules}\ %defattr(-,root,root)\ %{expand:%%files %{?2:%{2}-}devel}\ %defattr(-,root,root)\ %defverify(not mtime)\ /usr/src/kernels/%{KVERREL}%{?2:+%{2}}\ %{expand:%%files %{?2:%{2}-}modules-extra}\ %defattr(-,root,root)\ /lib/modules/%{KVERREL}%{?2:+%{2}}/extra\ %if %{with_debuginfo}\ %ifnarch noarch\ %{expand:%%files -f debuginfo%{?2}.list %{?2:%{2}-}debuginfo}\ %defattr(-,root,root)\ %endif\ %endif\ %if %{?2:1} %{!?2:0}\ %{expand:%%files %{2}}\ %defattr(-,root,root)\ %endif\ %endif\ %{nil} %kernel_variant_files %{with_up} %kernel_variant_files %{with_debug} debug %kernel_variant_files %{with_pae} %{pae} %kernel_variant_files %{with_pae_debug} %{pae}debug # plz don't put in a version string unless you're going to tag # and build. # # %changelog * Mon Dec 12 2016 Alexandre Oliva -libre - GNU Linux-libre 4.8.14-gnu. * Mon Dec 12 2016 Justin M. Forbes - 4.8.14-100 - Linux v4.8.14 - CVE-2016-8399 Fix out OOB stack read in memcpy_fromiovec (rhbz 1403833 1403834) * Fri Dec 9 2016 Alexandre Oliva -libre - GNU Linux-libre 4.8.13-gnu. * Fri Dec 09 2016 Justin M. Forbes - 4.8.13-100 - Linux v4.8.13 - CVE-2016-9576 fix use after free in SCSI generic device interface (rhbz 1403145 1403146) * Wed Dec 07 2016 Laura Abbott - Disable CONFIG_AF_KCM (rhbz 1402489) * Wed Dec 07 2016 Justin M. Forbes - CVE-2016-9793 avoid signed overflows for SO_{SND|RCV}BUFFORCE (rhbz 1402013 1402014) * Tue Dec 06 2016 Justin M. Forbes - CVE-2016-8655 fix race condition in packet_set_ring (rhbz 1400019 1401820) * Fri Dec 2 2016 Alexandre Oliva -libre - GNU Linux-libre 4.8.12-gnu. * Fri Dec 02 2016 Justin M. Forbes - 4.8.12-100 - Linux v4.8.12 - CVE-2016-9755 Fix Out-of-bounds write issue when defragmenting ipv6 packets (rhbz 1400904 1400905) - CVE-2016-9756 Fix kvm: stack memory information leakage (rhbz 1400468 1400469) - Fix kvm: out of bounds memory access via vcpu_id (rhbz 1400804 1400805) * Mon Nov 28 2016 Alexandre Oliva -libre - GNU Linux-libre 4.8.11-gnu. * Mon Nov 28 2016 Justin M. Forbes - 4.8.11-100 - Linux v4.8.11 - CVE-2016-8650 Fix NULL ptr dereference in mpi_powm() (rhbz 1395187 1398463) * Mon Nov 28 2016 Peter Robinson - Add upstream patch to fix all ARMv7 devices set to initial 200Mhz * Tue Nov 22 2016 Josh Boyer - Add patch from Dave Anderson to fix live system crash analysis on Aarch64 * Mon Nov 21 2016 Alexandre Oliva -libre - GNU Linux-libre 4.8.10-gnu. * Mon Nov 21 2016 Justin M. Forbes - 4.8.10-100 - Linux v4.8.10 * Tue Nov 15 2016 Alexandre Oliva -libre - GNU Linux-libre 4.8.8-gnu. * Tue Nov 15 2016 Justin M. Forbes - 4.8.8-100 - Linux v4.8.8 - Fix crash in tcp_collapse CVE-2016-8645 (rhbz 1393904 1393908) * Fri Nov 11 2016 Justin M. Forbes - Nouveau: Add Maxwell to backlight initialization (rhbz 1390308) * Fri Nov 11 2016 Alexandre Oliva -libre - GNU Linux-libre 4.8.7-gnu. * Fri Nov 11 2016 Justin M. Forbes - 4.8.7-100 - Refresh status of MST capable connectors (rhbz 1392885) * Thu Nov 10 2016 Justin M. Forbes - Linux v4.8.7 - Fixes cve-2016-8630 (rhbz 1393350 1393358) * Mon Nov 7 2016 Justin M. Forbes - Linux v4.8.6 * Thu Oct 27 2016 Justin M. Forbes - CVE-2016-9083 CVE-2016-9084 vfio multiple flaws (rhbz 1389258 1389259 1389285) * Thu Oct 27 2016 Alexandre Oliva -libre Tue Nov 1 - GNU Linux-libre 4.7.10-gnu. * Wed Oct 26 2016 Laura Abbott - 4.7.10-100 - Linux v4.7.10 * Sun Oct 23 2016 Alexandre Oliva -libre - GNU Linux-libre 4.7.9-gnu. * Thu Oct 20 2016 Justin M. Forbes - 4.7.9-100 - Linux v4.7.9 - CVE-2016-5195 (rhbz 1384344 1387080) * Tue Oct 18 2016 Peter Robinson - Build in AXP20X_I2C (should fix rhbz 1352140) * Mon Oct 17 2016 Alexandre Oliva -libre - GNU Linux-libre 4.7.8-gnu. * Mon Oct 17 2016 Laura Abbott - 4.7.8-100 - Linux v4.7.8 * Fri Oct 7 2016 Alexandre Oliva -libre - GNU Linux-libre 4.7.7-gnu. * Fri Oct 07 2016 Laura Abbott - 4.7.7-100 - Linux v4.7.7 * Mon Oct 3 2016 Alexandre Oliva -libre - GNU Linux-libre 4.7.6-gnu. * Mon Oct 03 2016 Laura Abbott - 4.7.6-100 - Linux v4.7.6 * Mon Sep 26 2016 Alexandre Oliva -libre - GNU Linux-libre 4.7.5-gnu. * Mon Sep 26 2016 Laura Abbott - 4.7.5-100 - Linux v4.7.5 * Mon Sep 19 2016 Justin M. Forbes - CVE-2016-7425 SCSI arcmsr buffer overflow (rhbz 1377330 1377331) * Thu Sep 15 2016 Alexandre Oliva -libre - GNU Linux-libre 4.7.4-gnu. * Thu Sep 15 2016 Laura Abbott - 4.7.4-100 - Linux v4.7.4 * Wed Sep 14 2016 Laura Abbott - Fix for incorrect return checking in cpupower (rhbz 1374212) - Let iio tools build on older kernels * Thu Sep 8 2016 Alexandre Oliva -libre - GNU Linux-libre 4.7.3-gnu. * Wed Sep 07 2016 - 4.7.3-100 - Linux v4.7.3 - Silence KASLR warning (rhbz 1350174) * Fri Sep 02 2016 - Add fix for known cgroup deadlock * Mon Aug 29 2016 Laura Abbott - Add event decoding fix (rhbz 1360688) - Add fix for NFS client issue (rhbz 1371237) * Sun Aug 28 2016 Peter Robinson - Minor ARM updates * Fri Aug 26 2016 Laura Abbott - 4.7.2-101 - Bump and build * Thu Aug 25 2016 Laura Abbott - Fix for TPROXY panic (rhbz 1370061) - Fix for known OOM regression * Tue Aug 23 2016 Laura Abbott - Fix for inabiltiy to send zero sized UDP packets (rhbz 1365940) * Tue Aug 23 2016 Justin M. Forbes - CVE-2016-6480 aacraid: Check size values after double-fetch from user (rhbz 1362466 1362467) * Tue Aug 23 2016 Alexandre Oliva -libre - GNU Linux-libre 4.7.2-gnu. * Mon Aug 22 2016 Laura Abbott - 4.7.2-100 - Linux v4.7.2 * Wed Aug 17 2016 Laura Abbott - 4.7.1-100 - Linux v4.7.1 * Wed Aug 17 2016 Alexandre Oliva -libre - GNU Linux-libre 4.6.7-gnu. * Wed Aug 17 2016 Justin M. Forbes - 4.6.7-200 - CVE-2016-6828 tcp fix use after free in tcp_xmit_retransmit_queue (rhbz 1367091 1367092) * Tue Aug 16 2016 Laura Abbott - Linux v4.6.7 - Fix for crash seen with Open Stack (rhbz 1361414) * Fri Aug 12 2016 Laura Abbott - Bring in fixes from f24 - Sync skylake hdaudio __unclaimed_reg WARN_ON fix with latest upstream version - Drop drm-i915-skl-Add-support-for-the-SAGV-fix-underrun-hangs.patch for now * Wed Aug 10 2016 Alexandre Oliva -libre - GNU Linux-libre 4.6.6-gnu. * Wed Aug 10 2016 Laura Abbott - 4.6.6-200 - Linux v4.6.6 * Mon Aug 08 2016 Josh Boyer - Build CONFIG_POWERNV_CPUFREQ in on ppc64* (rhbz 1351346) * Thu Jul 28 2016 Josh Boyer - CVE-2016-5412 powerpc: kvm: Infinite loop in HV mode (rhbz 1349916 1361040) * Thu Jul 28 2016 Alexandre Oliva -libre - GNU Linux-libre 4.6.5-gnu. * Wed Jul 27 2016 Josh Boyer - 4.6.5-200 - Linux v4.6.5 * Mon Jul 25 2016 Josh Boyer - CVE-2016-6136 race condition in auditsc.c (rhbz 1353533 1353534) * Mon Jul 25 2016 Justin Forbes - CVE-2016-5400 Fix memory leak in airspy driver (rhbz 1358184 1358186) * Thu Jul 14 2016 Josh Boyer - Fix various i915 uncore oopses (rhbz 1340218 1325020 1342722 1347681) * Tue Jul 12 2016 Josh Boyer - 4.6.4-201 - CVE-2016-5389 CVE-2016-5696 tcp challenge ack info leak (rhbz 1354708 1355615) * Tue Jul 12 2016 Alexandre Oliva - GNU Linux-libre 4.6.4-gnu. * Mon Jul 11 2016 Josh Boyer - 4.6.4-200 - Linux v4.6.4 * Fri Jul 08 2016 Josh Boyer - Make sure to package objtool * Thu Jul 07 2016 Josh Boyer - Fix oops in qla2xxx driver (rhbz 1346753) - Fix blank screen on some nvidia cards (rbhz 1351205) - CVE-2016-6156 race condition in chrome chardev driver (rhbz 1353490 1353491) * Wed Jul 6 2016 Alexandre Oliva - GNU Linux-libre 4.6.3-gnu. * Tue Jul 05 2016 Josh Boyer - Linux v4.6.3 - CVE-2016-6130 s390x race condition in sclp leads to info leak (rhbz 1352558 1352559) * Tue Jun 28 2016 Justin M. Forbes - 4.5.7-202 - CVE-2016-4998 oob reads when processing IPT_SO_SET_REPLACE setsockopt (rhbz 1349886 1350316) * Tue Jun 28 2016 Josh Boyer - CVE-2016-1237 missing check for permissions setting ACL (rhbz 1350845 1350847) - CVE-2016-5728 race condition in mic driver (rhbz 1350811 1350812) * Mon Jun 27 2016 Josh Boyer - 4.5.7-201 - CVE-2016-5829 heap overflow in hiddev (rhbz 1350509 1350513) * Mon Jun 27 2016 Justin M. Forbes - CVE-2016-4998 oob reads when processing IPT_SO_SET_REPLACE setsockopt (rhbz 1349886 1350316) * Wed Jun 15 2016 Laura Abbott - hp-wmi: fix wifi cannot be hard-unblock (rhbz 1338025) * Wed Jun 15 2016 Josh Boyer - CVE-2016-4470 keys: uninitialized variable crash (rhbz 1341716 1346626) * Mon Jun 13 2016 Josh Boyer - CVE-2016-1583 stack overflow via ecryptfs and /proc (rhbz 1344721 1344722) * Wed Jun 8 2016 Alexandre Oliva -libre - GNU Linux-libre 4.5.7-gnu. * Wed Jun 08 2016 Josh Boyer - 4.5.7-200 - Linux v4.5.7 * Tue Jun 07 2016 Josh Boyer - CVE-2016-5244 info leak in rds (rhbz 1343338 1343337) - CVE-2016-5243 info leak in tipc (rhbz 1343338 1343335) * Thu Jun 2 2016 Alexandre Oliva -libre - GNU Linux-libre 4.5.6-gnu. * Wed Jun 01 2016 Justin M. Forbes 4.5.6-200 - Linux v4.5.6 * Mon May 23 2016 Josh Boyer - CVE-2016-4951 null ptr deref in tipc_nl_publ_dump (rhbz 1338625 1338626) * Fri May 20 2016 Justin M. Forbes 4.5.5-201 - Remove the installonly additions until dnf can handle the transition * Fri May 20 2016 Josh Boyer - CVE-2016-4440 kvm: incorrect state leading to APIC register access (rhbz 1337806 1337807) * Thu May 19 2016 Alexandre Oliva -libre - GNU Linux-libre 4.5.5-gnu. * Thu May 19 2016 Josh Boyer - 4.5.5-200 - Linux v4.5.5 - CVE-2016-4913 isofs: info leak with malformed NM entries (rhbz 1337528 1337529) * Mon May 16 2016 Justin M. Forbes - Disable CONFIG_DEBUG_VM_PGFLAGS on non debug kernels (rhbz 1335173) * Mon May 16 2016 Josh Boyer - CVE-2016-3713 kvm: out-of-bounds access in set_var_mtrr_msr (rhbz 1332139 1336410) * Fri May 13 2016 Josh Boyer - CVE-2016-0758 pointer corruption in asn1 decoder (rhbz 1300257 1335386) * Thu May 12 2016 Alexandre Oliva -libre - GNU Linux-libre 4.5.4-gnu. * Wed May 11 2016 Justin M. Forbes - 4.5.4-200 - Linux v4.5.4 * Tue May 10 2016 Josh Boyer - Enable XEN SCSI front and backend (rhbz 1334512) - CVE-2016-4569 info leak in sound module (rhbz 1334643 1334645) * Mon May 09 2016 Justin M. Forbes -4.5.3-200 - Linux v4.5.3 rebase * Mon May 09 2016 Josh Boyer - CVE-2016-4557 bpf: Use after free vulnerability via double fdput CVE-2016-4558 bpf: refcnt overflow (rhbz 1334307 1334303 1334311) * Fri May 06 2016 Josh Boyer - Oops in propogate_mnt if first copy is slave (rhbz 1333712 1333713) * Thu May 05 2016 Josh Boyer - CVE-2016-4486 CVE-2016-4485 info leaks (rhbz 1333316 1333309 1333321) * Thu May 5 2016 Alexandre Oliva -libre - GNU Linux-libre 4.4.9-gnu. * Wed May 04 2016 Laura Abbott - 4.4.9-300 - Linux v4.4.9 * Wed May 04 2016 Josh Boyer - Enable NFC_NXP_NCI options (rhbz 1290556) - CVE-2016-4482 info leak in devio.c (rhbz 1332931 1332932) * Fri Apr 29 2016 Peter Robinson - Add patch to fix i.MX6 graphics * Thu Apr 28 2016 Josh Boyer - Don't splash warnings from broken BGRT firmware implementations - Require /usr/bin/kernel-install (rhbz 1331012) * Tue Apr 26 2016 Josh Boyer - Enable IEEE802154_AT86RF230 on more arches (rhbz 1330356) * Sun Apr 24 2016 Alexandre Oliva -libre - GNU Linux-libre 4.4.8-gnu. * Wed Apr 20 2016 Laura Abbott - 4.4.8-300 - Linux v4.4.8 - Allow antenna selection for rtl8723be (rhbz 1309487) * Tue Apr 19 2016 Josh Boyer - CVE-2016-3955 usbip: buffer overflow by trusting length of incoming packets (rhbz 1328478 1328479) * Fri Apr 15 2016 Josh Boyer - CVE-2016-3961 xen: hugetlbfs use may crash PV guests (rhbz 1327219 1323956) * Wed Apr 13 2016 Laura Abbott - Fix for Skylake pstate issues (rhbz 1309980) * Wed Apr 13 2016 Alexandre Oliva -libre - GNU Linux-libre 4.4.7-gnu. * Tue Apr 12 2016 Laura Abbott - 4.4.7-300 - Linux v4.4.7 * Tue Apr 12 2016 Josh Boyer - Fix Bamboo ONE issues (rhbz 1317116) * Mon Apr 11 2016 Josh Boyer - CVE-2016-3951 usbnet: crash on invalid USB descriptors (rhbz 1324782 1324815) - CVE-2015-8839 ext4: data corruption due to punch hole races (rhbz 1323577 1323579) * Thu Apr 07 2016 Justin M. Forbes - Enable Full Randomization on 32bit x86 CVE-2016-3672 (rhbz 1324749 1324750) * Thu Mar 31 2016 Josh Boyer - Add two more patches for CVE-2016-2184 * Wed Mar 30 2016 Laura Abbott - 4.4.6-301 - Bump and build * Tue Mar 29 2016 Josh Boyer - CVE-2016-3157 xen: priv escalation on 64bit PV domains with io port access (rhbz 1315711 1321948) * Wed Mar 23 2016 Laura Abbott - drm/udl: Use unlocked gem unreferencing (rhbz 1295646) * Tue Mar 22 2016 Josh Boyer - CVE-2016-3136 mct_u232: oops on invalid USB descriptors (rhbz 1317007 1317010) - CVE-2016-2187 gtco: oops on invalid USB descriptors (rhbz 1317017 1317010) * Mon Mar 21 2016 Laura Abbott - uas: Limit qdepth at the scsi-host level (rhbz 1315013) - Fix for performance regression caused by thermal (rhbz 1317190) - Input: synaptics - handle spurious release of trackstick buttons, again (rhbz 1318079) * Fri Mar 18 2016 Josh Boyer - ims-pcu: sanity checking on missing interfaces - CVE-2016-3140 digi_acceleport: oops on invalid USB descriptors (rhbz 1317010 1316995) - CVE-2016-3138 cdc_acm: oops on invalid USB descriptors (rhbz 1317010 1316204) - CVE-2016-2185 ati_remote2: oops on invalid USB descriptors (rhbz 1317014 1317471) - CVE-2016-2188 iowarrior: oops on invalid USB descriptors (rhbz 1317018 1317467) - CVE-2016-2186 powermate: oops on invalid USB descriptors (rhbz 1317015 1317464) - CVE-2016-3137 cypress_m8: oops on invalid USB descriptors (rhbz 1317010 1316996) - CVE-2016-2184 alsa: panic on invalid USB descriptors (rhbz 1317012 1317470) * Fri Mar 18 2016 Alexandre Oliva -libre - GNU Linux-libre 4.4.6-gnu. * Wed Mar 16 2016 Laura Abbott - 4.4.6-300 - Linux v4.4.6 * Wed Mar 16 2016 Laura Abbott - Revert patch causing radeon breakage (rhbz 1317300 1317179) * Wed Mar 16 2016 Josh Boyer - CVE-2016-3135 ipv4: DoS when destroying a network interface (rhbz 1318172 1318270) * Mon Mar 14 2016 Josh Boyer - CVE-2016-3134 netfilter: missing bounds check in ipt_entry struct (rhbz 1317383 1317384) - CVE-2016-3135 netfilter: size overflow in x_tables (rhbz 1317386 1317387) * Fri Mar 11 2016 Josh Boyer - Add patch for ICP DAS I-756xU devices (rhbz 1316136) * Thu Mar 10 2016 Laura Abbott - cdc-acm: fix NULL pointer reference (rhbz 1316719) * Thu Mar 10 2016 Alexandre Oliva -libre - GNU Linux-libre 4.4.5-gnu. * Wed Mar 09 2016 Laura Abbott - 4.4.5-300 - Linux v4.4.5 - Fix for known arm64 bootup issue * Sat Mar 5 2016 Alexandre Oliva -libre - GNU Linux-libre 4.4.4-gnu. * Fri Mar 04 2016 Laura Abbott -4.4.4-301 - Require updated XFS utilities * Thu Mar 03 2016 Laura Abbott - 4.4.4-300 - Linux v4.4.4 - Switch back to not using CONFIG_ACPI_REV_OVERRIDE_POSSIBLE * Thu Mar 03 2016 Josh Boyer - Partial SMAP bypass on 64-bit kernels (rhbz 1314253 1314255) * Wed Mar 02 2016 Laura Abbott - Fix for flickering on Intel graphics (rhbz 1310252 1313318) * Wed Mar 02 2016 Laura Abbott - Re-enable dropped CONFIG_ACPI_REV_OVERRIDE_POSSIBLE (rhbz 1313434) * Wed Mar 02 2016 Josh Boyer - pipe: limit the per-user amount of pages allocated in pipes (rhbz 1313428 1313433) * Sun Feb 28 2016 Alexandre Oliva -libre - GNU Linux-libre 4.4.3-gnu. * Fri Feb 26 2016 Laura Abbott - 4.4.3-300 - Linux v4.4.3 - Fix automounting behavior of ATA drives (rhbz 1310682) - Fix suspend blacklight blanking behavior * Thu Feb 25 2016 Peter Robinson - Fix deferred nouveau module loading on tegra * Wed Feb 24 2016 Josh Boyer - CVE-2016-2550 af_unix: incorrect accounting on in-flight fds (rhbz 1311517 1311518) * Tue Feb 23 2016 Laura Abbott - 4.4.2-301 - Fix a known use after free issue in the USB hub code - Fix AMD IOMMU warning spew on every boot (rhbz 1310258) * Sat Feb 20 2016 Peter Robinson - Drop AMD xgbe-a0 driver (fix aarch64 FTBFS) - Minor aarch64/ARMv7 config cleanup - ARM: enable nvmem drivers * Sat Feb 20 2016 Alexandre Oliva -libre - GNU Linux-libre 4.4.2-gnu. * Thu Feb 18 2016 Laura Abbott - 4.4.2-300 - Linux v4.4.2 * Thu Feb 18 2016 Josh Boyer - CVE-2015-8812 cxgb3 use after free (rhbz 1303532 1309548) * Wed Feb 17 2016 Josh Boyer - Backport mgag200 cursor hang fix (rhbz 1305181 1299901) * Tue Feb 16 2016 Josh Boyer - Backport fix for elantech touchpads (rhbz 1306987) * Mon Feb 15 2016 Josh Boyer - CVE-2016-2383 incorrect branch fixups for eBPG allow arbitrary reads (rhbz 1308452 1308453) - CVE-2016-2384 double free in usb-audio from invalid USB descriptor (rhbz 1308444 1308445) * Tue Feb 09 2016 Josh Boyer - CVE-2016-0617 fix hugetlbfs inode.c issues (rhbz 1305803 1305804) * Tue Feb 02 2016 Josh Boyer - Backport patch to fix memory leak in rtlwifi USB devices (rhbz 1303270) * Mon Feb 1 2016 Alexandre Oliva -libre - GNU Linux-libre 4.3.5-gnu. * Sun Jan 31 2016 Josh Boyer - 4.3.5-300 - Linux v4.3.5 * Fri Jan 29 2016 Josh Boyer - Backport HID sony patch to fix some gamepads (rhbz 1255235) * Thu Jan 28 2016 Josh Boyer - Fix issues with ivtv driver on PVR350 devices (rhbz 1278942) - Add patches to fix suprious NEWLINK netlink messages (rhbz 1302037) * Thu Jan 28 2016 Alexandre Oliva -libre Fri Jan 29 - GNU Linux-libre 4.3.4-gnu. * Mon Jan 25 2016 Josh Boyer - 4.3.4-300 - Add patch to fix some Elan touchpads (rhbz 1296677) * Sat Jan 23 2016 Josh Boyer - Linux v4.3.4 * Fri Jan 22 2016 Josh Boyer - Fix backtrace from PNP conflict on Haswell-ULT (rhbz 1300955) * Thu Jan 21 2016 Josh Boyer - CVE-XXXX-XXXX missing null ptr check in nf_nat_redirect_ipv4 (rhbz 1300731 1300732) - Fix incorrect country code issue on RTL8812AE devices (rhbz 1279653) * Wed Jan 20 2016 Josh Boyer - CVE-2016-0723 memory disclosure and crash in tty layer (rhbz 1296253 1300224) - CVE-2013-4312 file descr passed over unix sockects not properly accounted (rhbz 1297813 1300216) * Tue Jan 19 2016 Josh Boyer - 4.3.3-303 - Backport nouveau stable fixes (rhbz 1299349) - CVE-2016-0728 Keys: reference leak in join_session_keyring (rhbz 1296623 1297475) - Add currently queued networking stable patches - Add a couple btrfs patches cc'd to stable upstream - Add SCSI patches to avoid blacklist false positives (rhbz 1299810) * Mon Jan 18 2016 Josh Boyer - 4.3.3-302 - Backport stable fixed marked in upstream 4.4 - Fix rfkill issues on Yoga 700 (rhbz 1295272) - Fix SELinux issue with conditional rules (rhbz 1298192) * Fri Jan 15 2016 Josh Boyer - Fix block errors on PAE machines (rhbz 1298996) * Wed Jan 13 2016 Josh Boyer - 4.3.3-301 - Fix garbled video on some i915 machines (rhbz 1298309) * Tue Jan 12 2016 Josh Boyer - CVE-2015-7566 usb: visor: Crash on invalid USB dev descriptors (rhbz 1296466 1297517) - Fix backtrace from PNP conflict on Broadwell (rhbz 1083853) * Fri Jan 08 2016 Josh Boyer - Fix oops in nouveau driver for devices that don't have a PMU (rhbz 1296820) - Fix warnings from pre-nv50 cards (rhbz 1281368) - Fix touchpad on Dell XPS 13 9350 (rhbz 1296677) * Thu Jan 07 2016 Josh Boyer - CVE-2015-7513 kvm: divide by zero DoS (rhbz 1284847 1296142) - Quiet i915 gen8 irq messages (rhbz 1297143) * Thu Jan 7 2016 Alexandre Oliva -libre Fri Jan 8 - GNU Linux-libre 4.3.3-gnu. * Tue Jan 05 2016 Josh Boyer - CVE-2015-8709 ptrace: potential priv escalation with userns (rhbz 1295287 1295288) - Merge 4.3.3 from stabilization branch * Fri Dec 18 2015 Josh Boyer - CVE-2015-8575 information leak in sco_sock_bind (rhbz 1292840 1292841) * Thu Dec 17 2015 Justin M. Forbes - Fix for memory leak in vrf * Thu Dec 17 2015 Josh Boyer - CVE-2015-8569 info leak from getsockname (rhbz 1292045 1292047) * Thu Dec 17 2015 Alexandre Oliva -libre Fri Dec 18 - GNU Linux-libre 4.2.8-gnu. * Tue Dec 15 2015 Justin Forbes - 4.2.8-300 - Linux v4.2.8 * Tue Dec 15 2015 Josh Boyer - CVE-2015-8543 ipv6: DoS via NULL pointer dereference (rhbz 1290475 1290477) * Mon Dec 14 2015 Josh Boyer - CVE-2015-7550 Race between read and revoke keys (rhbz 1291197 1291198) - CVE-XXXX-XXXX permission bypass on overlayfs (rhbz 1291329 1291332) * Fri Dec 11 2015 Josh Boyer - CVE-2013-7446 unix sockects use after free (rhbz 1282688 1282712) * Thu Dec 10 2015 Laura Abbott - Ignore errors from scsi_dh_add_device (rhbz 1288687) * Thu Dec 10 2015 Josh Boyer - Fix rfkill issues on ideapad Y700-17ISK (rhbz 1286293) * Wed Dec 9 2015 Alexandre Oliva -libre Fri Dec 11 - GNU Linux-libre 4.2.7-gnu. * Wed Dec 09 2015 Justin Forbes - 4.2.7-300 - Linux v4.2.7 * Thu Dec 03 2015 Josh Boyer - Add patch to fix palm rejection on certain touchpads (rhbz 1287819) - Add new PCI ids for wireless, including Lenovo Yoga (rhbz 1275490) * Tue Dec 01 2015 Laura Abbott - Enable CONFIG_X86_INTEL_MPX (rhbz 1287279) * Tue Dec 01 2015 Josh Boyer - CVE-2015-7515 aiptek: crash on invalid device descriptors (rhbz 1285326 1285331) - CVE-2015-7833 usbvision: crash on invalid device descriptors (rhbz 1270158 1270160) * Mon Nov 30 2015 Josh Boyer - Fix crash in add_key (rhbz 1284059) - CVE-2015-8374 btrfs: info leak when truncating compressed/inlined extents (rhbz 1286261 1286262) * Sun Nov 22 2015 Peter Robinson - Fix sound issue on some ARM devices (tested on Arndale) * Fri Nov 20 2015 Justin M. Forbes - 4.2.6-301 - Fix for GRE tunnel running in IPSec (rhbz 1272571) - Fix KVM on specific hardware (rhbz 1278688) * Mon Nov 16 2015 Josh Boyer - Fix ipset netfilter issues (rhbz 1279189) * Thu Nov 12 2015 Josh Boyer - CVE-2015-5327 x509 time validation * Tue Nov 10 2015 Josh Boyer - Fix Yoga 900 rfkill switch issues (rhbz 1275490) * Tue Nov 10 2015 Alexandre Oliva -libre - GNU Linux-libre 4.2.6-gnu. * Tue Nov 10 2015 Justin M. Forbes - 4.2.6-300 - Linux v4.2.6 * Tue Nov 10 2015 Josh Boyer - Fix incorrect size calculations in megaraid with 64K pages (rhbz 1269300) - CVE-2015-8104 kvm: DoS infinite loop in microcode DB exception (rhbz 1278496 1279691) - CVE-2015-5307 kvm: DoS infinite loop in microcode AC exception (rhbz 1277172 1279688) * Thu Nov 5 2015 Peter Robinson - Disable Exynos IOMMU as it crashes * Thu Nov 05 2015 Josh Boyer - Fix backlight regression on older radeon devices (rhbz 1278407) * Wed Nov 4 2015 Peter Robinson - Enable some IIO sensors (temp/humidity) on ARMv7 * Tue Nov 03 2015 Josh Boyer - CVE-2015-7799 slip:crash when using PPP char dev driver (rhbz 1271134 1271135) * Mon Nov 02 2015 Laura Abbott - Add spurious wakeup quirk for LynxPoint-LP controllers (rhbz 1257131) * Thu Oct 29 2015 Josh Boyer - CVE-2015-7099 RDS: race condition on unbound socket null deref (rhbz 1276437 1276438) * Thu Oct 29 2015 Josh Boyer - Move iscsi_tcp and related modules to kernel-core (rhbz 1249424) * Tue Oct 27 2015 Peter Robinson - CMA memory patch to fix aarch64 builder lockups * Mon Oct 26 2015 Alexandre Oliva -libre - GNU Linux-libre 4.2.5-gnu. * Mon Oct 26 2015 Justin M. Forbes - 4.2.5-300 - Linux v4.2.5 * Fri Oct 23 2015 Alexandre Oliva -libre - GNU Linux-libre 4.2.4-gnu. * Fri Oct 23 2015 Justin M. Forbes - 4.2.4-300 - Linux v4.2.4 (rhbz 1272645) * Tue Oct 20 2015 Josh Boyer - Enable IEEE802154_ATUSB (rhbz 1272935) * Mon Oct 19 2015 Josh Boyer - Fix crash in key garbage collector when using request_key (rhbz 1272172) * Thu Oct 15 2015 Justin M. Forbes - Fix for iscsi target issues (#rhbz 1271812) * Wed Oct 07 2015 Josh Boyer - Increase the default number of runtime UARTS (rhbz 1264383) * Wed Oct 07 2015 Justin M. Forbes - Enable CONFIG_ACPI_REV_OVERRIDE_POSSIBLE for Dell XPS sound (rhbz 1255070) - Enable CONFIG_X86_NUMACHIP * Mon Oct 05 2015 Laura Abbott - Make headphone work with with T550 + Dock (rhbz 1268037) * Mon Oct 05 2015 Laura Abbott - Stop stack smash for several DVB devices (rhbz 1265978) * Mon Oct 5 2015 Alexandre Oliva -libre - GNU Linux-libre 4.2.3-gnu. * Mon Oct 05 2015 Justin M. Forbes - 4.2.3-300 - Linux v4.2.3 - Netdev fix race in resq_queue_unlink * Sun Oct 4 2015 Peter Robinson - Add upstream patch to fix a Anatop (i.MX) regulator loading as a module - Add support for BeagleBone Green * Fri Oct 02 2015 Josh Boyer - CVE-2015-7613 Unauthorized access to IPC via SysV shm (rhbz 1268270 1268273) * Thu Oct 01 2015 Josh Boyer - CVE-2015-2925 Don't allow bind mount escape (rhbz 1209367 1209373) * Wed Sep 30 2015 Alexandre Oliva -libre - GNU Linux-libre 4.2.2-gnu. * Tue Sep 29 2015 Justin M. Forbes - 4.2.2-300 - Linux v4.2.2 * Mon Sep 28 2015 Peter Robinson - Add upstream patch to fix a Allwinner regulator loading as a module * Thu Sep 24 2015 Josh Boyer - CVE-2015-5257 Null ptr deref in usb whiteheat driver (rhbz 1265607 1265612) * Tue Sep 22 2015 Alexandre Oliva -libre - GNU Linux-libre 4.2.1-gnu. * Mon Sep 21 2015 Justin M. Forbes - 4.2.1-300 - Linux v4.2.1 * Thu Sep 17 2015 Josh Boyer - Fix oops in 32-bit kernel on 64-bit AMD cpus (rhbz 1263762) * Tue Sep 15 2015 Josh Boyer - CVE-2015-6937 net: rds null pointer (rhbz 1263139 1263140) * Wed Sep 9 2015 Peter Robinson - Minor ARMv7/aarch64 config updates * Tue Sep 08 2015 Josh Boyer - Fix oops in blk layer (rhbz 1237136) * Fri Sep 04 2015 Justin M. Forbes - 4.2.0-300 - Bump linux-firmware require for amdgpu (rhbz 1259542) * Wed Sep 02 2015 Justin M. Forbes - Make flush_workqueue() available again to non GPL modules (rhbz 1259231) * Mon Aug 31 2015 Alexandre Oliva -libre - GNU Linux-libre 4.2-gnu. * Mon Aug 31 2015 Josh Boyer - 4.2.0-1 - Linux v4.2 * Fri Aug 28 2015 Josh Boyer - 4.2.0-0.rc8.git3.1 - Linux v4.2-rc8-37-g4941b8f0c2b9 * Thu Aug 27 2015 Josh Boyer - Fix vmware driver issues from Thomas Hellström (rhbz 1227193) * Thu Aug 27 2015 Josh Boyer - 4.2.0-0.rc8.git2.1 - Linux v4.2-rc8-10-gf9ed72dde34e - Add patch from Hans de Goede to fix nv46 based cards (rhbz 1257534) - Add patch from Jonathon Jongsma to fix modes in qxl (rhbz 1212201) * Wed Aug 26 2015 Josh Boyer - 4.2.0-0.rc8.git1.1 - Linux v4.2-rc8-7-gf5db4b31b315 - Fixes x2apic panic (rhbz 1224764) - Don't build perf-read-vdsox32 either - Enable SCHEDSTATS and LATENCYTOP again (rhbz 1013225) * Mon Aug 24 2015 Peter Robinson - Build in GPIO_OMAP to fix BeagleBone boot on mSD (changes in 4.2 upstream) * Mon Aug 24 2015 Josh Boyer - 4.2.0-0.rc8.git0.1 - Linux v4.2-rc8 * Fri Aug 21 2015 Josh Boyer - Disable EFI_VARS (rhbz 1252137) * Fri Aug 21 2015 Josh Boyer - 4.2.0-0.rc7.git4.1 - Linux v4.2-rc7-100-ge45fc85a2f37 * Fri Aug 21 2015 Josh Boyer - 4.2.0-0.rc7.git3.1 - Linux v4.2-rc7-71-g0bad90985d39 * Fri Aug 21 2015 Peter Robinson - Minor config updates for ARMv7 * Thu Aug 20 2015 Josh Boyer - Fix incorrect ext4 freezing behavior on non-journaled fs (rhbz 1250717) * Wed Aug 19 2015 Josh Boyer - 4.2.0-0.rc7.git2.1 - Linux v4.2-rc7-24-g1b647a166f07 * Tue Aug 18 2015 Josh Boyer - 4.2.0-0.rc7.git1.1 - Linux v4.2-rc7-15-gbf6740281ed5 * Mon Aug 17 2015 Josh Boyer - Fix iscsi issue (rhbz 1253789) * Mon Aug 17 2015 Alexandre Oliva -libre Mon Aug 24 - GNU Linux-libre 4.2-rc7-gnu. * Mon Aug 17 2015 Josh Boyer - 4.2.0-0.rc7.git0.1 - Linux v4.2-rc7 * Sat Aug 15 2015 Josh Boyer - Patch from Hans de Goede to add yoga 3 rfkill quirk (rhbz 1239050) * Fri Aug 14 2015 Josh Boyer - 4.2.0-0.rc6.git1.1 - Linux v4.2-rc6-130-g7ddab73346a1 * Fri Aug 14 2015 Alexandre Oliva -libre Sat Aug 15 - GNU Linux-libre 4.2-rc6-gnu. - Drop obsolete patch for libreboot. - Turn freedo patch into a git patch. * Tue Aug 11 2015 Peter Robinson - 4.2.0-0.rc6.git0.2 - Drop UACCESS_WITH_MEMCPY on ARMv7 as it's broken (rhbz 1250613) * Sun Aug 09 2015 Josh Boyer - 4.2.0-0.rc6.git0.1 - Linux v4.2-rc6 * Fri Aug 07 2015 Josh Boyer - 4.2.0-0.rc5.git3.1 - Linux v4.2-rc5-78-g49d7c6559bf2 * Wed Aug 05 2015 Josh Boyer - 4.2.0-0.rc5.git2.1 - Linux v4.2-rc5-42-g4e6b6ee253ce * Tue Aug 04 2015 Josh Boyer - Patch from Nicholas Kudriavtsev for Acer Switch 12 Fn keys (rhbz 1244511) * Tue Aug 04 2015 Josh Boyer - 4.2.0-0.rc5.git1.1 - Linux v4.2-rc5-19-gc2f3ba745d1c * Tue Aug 04 2015 Hans de Goede - Always enable mmiotrace when building x86 kernels * Tue Aug 04 2015 Hans de Goede - Move joydev.ko from kernel-modules-extra to kernel-modules * Mon Aug 03 2015 Josh Boyer - Fix i386 boot bug correctly (rhbz 1247382) - CVE-2015-5697 info leak in md driver (rhbz 1249011 1249013) * Mon Aug 03 2015 Josh Boyer - 4.2.0-0.rc5.git0.1 - Linux v4.2-rc5 * Mon Aug 03 2015 Josh Boyer - Revert upstream commit 1c220c69ce to fix i686 booting (rhbz 1247382) * Fri Jul 31 2015 Josh Boyer - 4.2.0-0.rc4.git4.1 - Linux v4.2-rc4-111-g8400935737bf * Thu Jul 30 2015 Josh Boyer - 4.2.0-0.rc4.git3.1 - Linux v4.2-rc4-87-g86ea07ca846a * Thu Jul 30 2015 Peter Robinson - Disable CRYPTO_DEV_VMX_ENCRYPT on PPC for now to fix Power 8 boot (rhbz 1237089) * Wed Jul 29 2015 Josh Boyer - 4.2.0-0.rc4.git2.1 - Linux v4.2-rc4-53-g956325bd55bb * Wed Jul 29 2015 Josh Boyer - Drop acpi_brightness_enable revert patch * Tue Jul 28 2015 Josh Boyer - 4.2.0-0.rc4.git1.1 - Linux v4.2-rc4-44-g67eb890e5e13 * Mon Jul 27 2015 Josh Boyer - 4.2.0-0.rc4.git0.1 - Linux v4.2-rc4 - CVE-2015-1333 add_key memory leak (rhbz 1244171) * Fri Jul 24 2015 Josh Boyer - 4.2.0-0.rc3.git4.1 - Linux v4.2-rc3-136-g45b4b782e848 * Thu Jul 23 2015 Josh Boyer - 4.2.0-0.rc3.git3.1 - Linux v4.2-rc3-115-gc5dfd654d0ec * Wed Jul 22 2015 Josh Boyer - 4.2.0-0.rc3.git2.1 - Linux v4.2-rc3-17-gd725e66c06ab * Tue Jul 21 2015 Josh Boyer - 4.2.0-0.rc3.git1.1 - Linux v4.2-rc3-4-g9d634c410b07 * Tue Jul 21 2015 Peter Robinson - Fix stmmac eth driver (AllWinner, other ARM, and other devices) * Mon Jul 20 2015 Josh Boyer - 4.2.0-0.rc3.git0.1 - Linux v4.2-rc3 * Fri Jul 17 2015 Josh Boyer - 4.2.0-0.rc2.git2.1 - Linux v4.2-rc2-190-g21bdb584af8c * Fri Jul 17 2015 Peter Robinson - Enable DW MMC for generic ARM (hi6220 SoC support) * Wed Jul 15 2015 Josh Boyer - 4.2.0-0.rc2.git1.1 - Linux v4.2-rc2-77-gf760b87f8f12 * Wed Jul 15 2015 Josh Boyer - Drop kdbus as it wasn't merged in time for f23 * Tue Jul 14 2015 Peter Robinson - Update AMD Seattle a0 eth driver for 4.2 * Mon Jul 13 2015 Josh Boyer - 4.2.0-0.rc2.git0.1 - Linux v4.2-rc2 - Disable debugging options. * Fri Jul 10 2015 Josh Boyer - 4.2.0-0.rc1.git3.1 - Linux v4.2-rc1-62-gc4b5fd3fb205 - Build perf with NO_PERF_READ_VDSO32 on all arches * Thu Jul 09 2015 Josh Boyer - Use git to apply patches * Wed Jul 08 2015 Josh Boyer - 4.2.0-0.rc1.git2.1 - Linux v4.2-rc1-33-gd6ac4ffc61ac * Tue Jul 07 2015 Josh Boyer - Add kdbus * Tue Jul 07 2015 Josh Boyer - 4.2.0-0.rc1.git1.1 - Linux v4.2-rc1-17-gc7e9ad7da219 - Reenable debugging options. * Mon Jul 06 2015 Josh Boyer - 4.2.0-0.rc1.git0.1 - Linux v4.2-rc1 - Disable debug options. - Add patch to fix perf build * Thu Jul 2 2015 Peter Robinson - Move aarch64 relevant AMBA config options to arm-generic - Minor ARMv7 updates * Wed Jul 01 2015 Josh Boyer - 4.2.0-0.rc0.git4.1 - Linux v4.1-11549-g05a8256c586a * Tue Jun 30 2015 Josh Boyer - 4.2.0-0.rc0.git3.1 - Linux v4.1-11355-g6aaf0da8728c - Add patch to fix KVM sleeping in atomic issue (rhbz 1237143) - Fix errant with_perf disable that removed perf entirely (rhbz 1237266) * Tue Jun 30 2015 Peter Robinson - Minor Aarch64 updates and cleanups - Enable initial support for hi6220 * Mon Jun 29 2015 Josh Boyer - 4.1.0-0.rc0.git2.1 - Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options. * Fri Jun 26 2015 Peter Robinson - Reorganisation and cleanup of the powerpc configs * Thu Jun 25 2015 Josh Boyer - Linux v4.1-5596-gaefbef10e3ae * Mon Jun 22 2015 Alexandre Oliva -libre - GNU Linux-libre 4.1-gnu. * Mon Jun 22 2015 Josh Boyer - 4.1.0-1 - Linux v4.1 * Thu Jun 18 2015 Josh Boyer - Add patch to fix touchpad issues on Razer machines (rhbz 1227891) * Thu Jun 18 2015 Alexandre Oliva -libre Fri Jun 19 - GNU Linux-libre 4.1-rc8-gnu. * Tue Jun 16 2015 Josh Boyer - 4.1.0-0.rc8.git0.2 - Bump for rebuild to hopefully fix size issues due to elfutils bug * Tue Jun 16 2015 Peter Robinson - Make some of the ARMv7 cpufreq drivers modular * Mon Jun 15 2015 Josh Boyer - 4.1.0-0.rc8.git0.1 - Linux v4.1-rc8 * Fri Jun 12 2015 Josh Boyer - 4.1.0-0.rc7.git1.1 - Linux v4.1-rc7-72-gdf5f4158415b * Fri Jun 12 2015 Josh Boyer - CVE-2015-XXXX kvm: NULL ptr deref in kvm_apic_has_events (rhbz 1230770 1230774) * Tue Jun 09 2015 Josh Boyer - Fix touchpad for Thinkpad S540 (rhbz 1223051) * Mon Jun 8 2015 Alexandre Oliva -libre Fri Jun 12 - GNU Linux-libre 4.1-rc7-gnu. * Mon Jun 08 2015 Josh Boyer - 4.1.0-0.rc7.git0.1 - Linux v4.1-rc7 * Thu Jun 04 2015 Josh Boyer - 4.1.0-0.rc6.git2.1 - Linux v4.1-rc6-49-g8a7deb362b76 * Thu Jun 04 2015 Josh Boyer - Add patch to turn of WC mmaps on i915 from airlied (rhbz 1226743) * Wed Jun 03 2015 Laura Abbott - Drop that blasted firwmare warning until we get a real fix (rhbz 1133378) * Wed Jun 03 2015 Laura Abbott - Fix auditing of canonical mode (rhbz 1188695) * Wed Jun 03 2015 Josh Boyer - Fix from Ngo Than for perf build on ppc64le (rhbz 1227260) * Wed Jun 03 2015 Josh Boyer - 4.1.0-0.rc6.git1.1 - Linux v4.1-rc6-44-g8cd9234c64c5 * Tue Jun 02 2015 Josh Boyer - Fix middle button issues on external Lenovo keyboards (rhbz 1225563) * Mon Jun 1 2015 Alexandre Oliva -libre Sun Jun 7 - GNU Linux-libre 4.1-rc6-gnu. - Drop patch for upstreamed (libre|core)boot bug that causes a boot-time oops. * Mon Jun 01 2015 Josh Boyer - 4.1.0-0.rc6.git0.1 - Linux v4.1-rc6 * Thu May 28 2015 Josh Boyer - Add quirk for Mac Pro backlight (rhbz 1217249) * Mon May 25 2015 Josh Boyer - 4.1.0-0.rc5.git0.1 - Linux v4.1-rc5 - Disable debugging options. * Thu May 21 2015 Josh Boyer - 4.1.0-0.rc4.git1.1 - Linux v4.1-rc4-11-g1113cdfe7d2c - Reenable debugging options. - Add patch to fix discard on md RAID0 (rhbz 1223332) * Mon May 18 2015 Josh Boyer - 4.1.0-0.rc4.git0.1 - Linux v4.1-rc4 - Disable debugging options. * Mon May 18 2015 Josh Boyer - Fix incorrect bandwidth on some Chicony webcams - Fix DVB oops (rhbz 1220118) * Mon May 18 2015 Josh Boyer - 4.1.0-0.rc3.git4.1 - Linux v4.1-rc3-346-gc0655fe9b090 - Enable in-kernel vmmouse driver (rhbz 1214474) * Fri May 15 2015 Josh Boyer - 4.1.0-0.rc3.git3.1 - Linux v4.1-rc3-177-gf0897f4cc0fc * Thu May 14 2015 Josh Boyer - Fix non-empty dir removal in overlayfs (rhbz 1220915) * Wed May 13 2015 Laura Abbott - Fix spew from KVM switch (rhbz 1219343) * Wed May 13 2015 Josh Boyer - 4.1.0-0.rc3.git2.1 - Linux v4.1-rc3-165-g110bc76729d4 * Tue May 12 2015 Josh Boyer - 4.1.0-0.rc3.git1.1 - Linux v4.1-rc3-46-g4cfceaf0c087 - Reenable debugging options. * Mon May 11 2015 Josh Boyer - 4.1.0-0.rc3.git0.1 - Linux v4.1-rc3 - Disable debugging options. - Use kernel-install to create files in /boot partition (from Harald Hoyer) * Mon May 11 2015 Peter Robinson - Minor ARM update * Thu May 07 2015 Josh Boyer - 4.1.0-0.rc2.git3.1 - Linux v4.1-rc2-79-g0e1dc4274828 * Wed May 06 2015 Josh Boyer - 4.1.0-0.rc2.git2.1 - Linux v4.1-rc2-37-g5198b44374ad * Tue May 05 2015 Josh Boyer - 4.1.0-0.rc2.git1.1 - Linux v4.1-rc2-7-gd9cee5d4f66e - Reenable debugging options. * Tue May 05 2015 Josh Boyer - Backport patch to blacklist TRIM on all Samsung 8xx series SSDs (rhbz 1218662) * Mon May 04 2015 Josh Boyer - 4.1.0-0.rc2.git0.1 - Linux v4.1-rc2 - Disable debugging options. * Sun May 3 2015 Peter Robinson - Enable ACPI on aarch64 - General ARMv7 updates * Fri May 01 2015 Josh Boyer - 4.1.0-0.rc1.git1.1 - Linux v4.1-rc1-117-g4a152c3913fb - Reenable debugging options. * Tue Apr 28 2015 Justin M. Forbes - Fix up boot times for live images (rhbz 1210857) * Mon Apr 27 2015 Josh Boyer - 4.1.0-0.rc1.git0.1 - Linux v4.1-rc1 - Disable debugging options. * Fri Apr 24 2015 Josh Boyer - 4.1.0-0.rc0.git14.1 - Linux v4.0-10976-gd56a669ca59c * Fri Apr 24 2015 Josh Boyer - Fix iscsi with QNAP devices (rhbz 1208999) * Thu Apr 23 2015 Josh Boyer - 4.1.0-0.rc0.git13.1 - Linux v4.0-10710-g27cf3a16b253 * Wed Apr 22 2015 Peter Robinson - Update AMD xgbe a0 aarch64 driver for 4.1 * Wed Apr 22 2015 Peter Robinson - 4.1.0-0.rc0.git12.1 - Inital ARM updates for 4.1 - Temporarily disable AMD ARM64 xgbe-a0 driver * Wed Apr 22 2015 Josh Boyer - Linux v4.0-9804-gdb4fd9c5d072 * Tue Apr 21 2015 Josh Boyer - 4.1.0-0.rc0.git11.1 - Linux v4.0-9362-g1fc149933fd4 * Tue Apr 21 2015 Josh Boyer - Enable ECHO driver (rhbz 749884) * Mon Apr 20 2015 Josh Boyer - 4.1.0-0.rc0.git10.1 - Linux v4.0-8962-g14aa02449064 - DRM merge * Mon Apr 20 2015 Dennis Gilmore - enable mvebu for the LPAE kernel * Mon Apr 20 2015 Josh Boyer - 4.1.0-0.rc0.git9.1 - Linux v4.0-8158-g09d51602cf84 * Sat Apr 18 2015 Josh Boyer - 4.1.0-0.rc0.git8.1 - Linux v4.0-7945-g7505256626b0 * Fri Apr 17 2015 Josh Boyer - 4.1.0-0.rc0.git7.1 - Linux v4.0-7300-g4fc8adcfec3d - Patch from Benjamin Tissoires to fix 3 finger tap on synaptics (rhbz 1212230) - Add patch to support touchpad on Google Pixel 2 (rhbz 1209088) * Fri Apr 17 2015 Josh Boyer - 4.1.0-0.rc0.git6.1 - Linux v4.0-7209-g7d69cff26cea * Thu Apr 16 2015 Josh Boyer - 4.1.0-0.rc0.git5.1 - Linux v4.0-7084-g497a5df7bf6f * Thu Apr 16 2015 Josh Boyer - 4.1.0-0.rc0.git4.1 - Linux v4.0-6817-geea3a00264cf * Wed Apr 15 2015 Josh Boyer - 4.1.0-0.rc0.git3.1 - Linux v4.0-5833-g6c373ca89399 * Wed Apr 15 2015 Josh Boyer - 4.1.0-0.rc0.git2.1 - Linux v4.0-3843-gbb0fd7ab0986 * Tue Apr 14 2015 Josh Boyer - 4.1.0-0.rc0.git1.1 - Linux v4.0-2620-gb79013b2449c - Reenable debugging options. * Mon Apr 13 2015 Alexandre Oliva -libre Mon Apr 20 - GNU Linux-libre 4.0-gnu. - Work around a (libre|core)boot bug that causes a boot-time oops. * Sun Apr 12 2015 Josh Boyer - 4.0.0-1 - Linux v4.0 * Fri Apr 10 2015 Josh Boyer - 4.0.0-0.rc7.git2.1 - Linux v4.0-rc7-42-ge5e02de0665e * Thu Apr 09 2015 Josh Boyer - 4.0.0-0.rc7.git1.1 - Linux v4.0-rc7-30-g20624d17963c * Thu Apr 02 2015 Josh Boyer - 4.0.0-0.rc6.git2.1 - Linux v4.0-rc6-101-g0a4812798fae * Thu Apr 02 2015 Josh Boyer - DoS against IPv6 stacks due to improper handling of RA (rhbz 1203712 1208491) * Wed Apr 01 2015 Josh Boyer - 4.0.0-0.rc6.git1.1 - Linux v4.0-rc6-31-gd4039314d0b1 - CVE-2015-2150 xen: NMIs triggerable by guests (rhbz 1196266 1200397) * Tue Mar 31 2015 Josh Boyer - Enable MLX4_EN_VXLAN (rhbz 1207728) * Mon Mar 30 2015 Josh Boyer - 4.0.0-0.rc6.git0.1 - Linux v4.0-rc6 * Fri Mar 27 2015 Josh Boyer - 4.0.0-0.rc5.git4.1 - Linux v4.0-rc5-96-g3c435c1e472b - Fixes hangs due to i915 issues (rhbz 1204050 1206056) * Thu Mar 26 2015 Josh Boyer - 4.0.0-0.rc5.git3.1 - Linux v4.0-rc5-80-g4c4fe4c24782 * Wed Mar 25 2015 Peter Robinson - Add aarch64 patches to fix mustang usb, seattle eth, and console settings * Wed Mar 25 2015 Josh Boyer - 4.0.0-0.rc5.git2.4 - Add patches to fix a few more i915 hangs/oopses * Wed Mar 25 2015 Josh Boyer - 4.0.0-0.rc5.git2.1 - Linux v4.0-rc5-53-gc875f421097a * Tue Mar 24 2015 Josh Boyer - Fix ALPS v5 and v7 trackpads (rhbz 1203584) * Tue Mar 24 2015 Josh Boyer - 4.0.0-0.rc5.git1.3 - Linux v4.0-rc5-25-g90a5a895cc8b - Add some i915 fixes * Mon Mar 23 2015 Josh Boyer - 4.0.0-0.rc5.git0.3 - Enable CONFIG_SND_BEBOB (rhbz 1204342) - Validate iovec range in sys_sendto/sys_recvfrom - Revert i915 commit that causes boot hangs on at least some headless machines - Linux v4.0-rc5 * Fri Mar 20 2015 Josh Boyer - 4.0.0-0.rc4.git2.1 - Linux v4.0-rc4-199-gb314acaccd7e - Fix brightness on Lenovo Ideapad Z570 (rhbz 1187004) * Thu Mar 19 2015 Josh Boyer - 4.0.0-0.rc4.git1.3 - Linux v4.0-rc4-88-g7b09ac704bac - Rename arm64-xgbe-a0.patch * Thu Mar 19 2015 Peter Robinson - Drop arm64 non upstream patch * Thu Mar 19 2015 Josh Boyer - Add patch to fix high cpu usage on direct_read kernfs files (rhbz 1202362) * Wed Mar 18 2015 Jarod Wilson - Fix kernel-uname-r Requires/Provides variant mismatches * Tue Mar 17 2015 Kyle McMartin - 4.0.0-0.rc4.git0.3 - Update kernel-arm64.patch, move EDAC to arm-generic, add EDAC_XGENE on arm64. - Add PCI_ECAM on generic, since it'll be selected most places anyway. * Mon Mar 16 2015 Jarod Wilson - Fix bad variant usage in kernel dependencies * Mon Mar 16 2015 Josh Boyer - 4.0.0-0.rc4.git0.1 - Linux v4.0-rc4 - Drop arm64 RCU revert patch. Should be fixed properly upstream now. - Disable debugging options. * Sun Mar 15 2015 Jarod Wilson - Fix kernel-tools sub-packages for variant builds * Fri Mar 13 2015 Josh Boyer - Fix esrt build on aarch64 * Fri Mar 13 2015 Kyle McMartin - arm64-revert-tlb-rcu_table_free.patch: revert 5e5f6dc1 which causes lockups on arm64 machines. - Also revert ESRT on AArch64 for now. * Fri Mar 13 2015 Josh Boyer - 4.0.0-0.rc3.git2.1 - Linux v4.0-rc3-148-gc202baf017ae - Add patch to support clickpads (rhbz 1201532) * Thu Mar 12 2015 Josh Boyer - CVE-2014-8159 infiniband: uverbs: unprotected physical memory access (rhbz 1181166 1200950) * Wed Mar 11 2015 Josh Boyer - 4.0.0-0.rc3.git1.1 - Linux v4.0-rc3-111-gaffb8172de39 - CVE-2015-2150 xen: NMIs triggerable by guests (rhbz 1196266 1200397) - Patch series to fix Lenovo *40 and Carbon X1 touchpads (rhbz 1200777 1200778) - Revert commit that added bad rpath to cpupower (rhbz 1199312) - Reenable debugging options. * Mon Mar 09 2015 Josh Boyer - 4.0.0-0.rc3.git0.1 - Linux v4.0-rc3 - Disable debugging options. * Sun Mar 8 2015 Peter Robinson - ARMv7: add patches to fix crash on boot for some devices on multiplatform * Fri Mar 06 2015 Josh Boyer - 4.0.0-0.rc2.git2.1 - Linux v4.0-rc2-255-g5f237425f352 * Thu Mar 05 2015 Josh Boyer - 4.0.0-0.rc2.git1.1 - Linux v4.0-rc2-150-g6587457b4b3d - Reenable debugging options. * Wed Mar 04 2015 Josh Boyer - Enable MLX4_EN on ppc64/aarch64 (rhbz 1198719) * Tue Mar 03 2015 Josh Boyer - 4.0.0-0.rc2.git0.1 - Linux v4.0-rc2 - Enable CONFIG_CM32181 for ALS on Carbon X1 - Disable debugging options. * Tue Mar 03 2015 Josh Boyer - 4.0.0-0.rc1.git3.1 - Linux v4.0-rc1-178-g023a6007a08d * Mon Mar 02 2015 Josh Boyer - Add patch to fix nfsd soft lockup (rhbz 1185519) - Enable ET131X driver (rhbz 1197842) - Enable YAMA (rhbz 1196825) * Sat Feb 28 2015 Peter Robinson - ARMv7 OMAP updates, fix panda boot * Fri Feb 27 2015 Josh Boyer - 4.0.0-0.rc1.git2.1 - Linux v4.0-rc1-36-g4f671fe2f952 * Wed Feb 25 2015 Josh Boyer - Add support for AR5B195 devices from Alexander Ploumistos (rhbz 1190947) * Tue Feb 24 2015 Josh Boyer - 4.0.0-0.rc1.git1.1 - Linux v4.0-rc1-22-gb24e2bdde4af - Reenable debugging options. * Tue Feb 24 2015 Richard W.M. Jones - 4.0.0-0.rc1.git0.2 - Add patch to fix aarch64 KVM bug with module loading (rhbz 1194366). * Tue Feb 24 2015 Peter Robinson - Minor ARM config update * Mon Feb 23 2015 Josh Boyer - 4.0.0-0.rc1.git0.1 - Add patch for HID i2c from Seth Forshee (rhbz 1188439) * Mon Feb 23 2015 Josh Boyer - Linux v4.0-rc1 - CVE-2015-0275 ext4: fallocate zero range page size > block size BUG (rhbz 1193907 1195178) - Disable debugging options. * Fri Feb 20 2015 Josh Boyer - 3.20.0-0.rc0.git10.1 - Linux v3.19-8975-g3d883483dc0a - Add patch to fix intermittent hangs in nouveau driver - Move mtpspi and related mods to kernel-core for VMWare guests (rhbz 1194612) * Wed Feb 18 2015 Josh Boyer - 3.20.0-0.rc0.git9.1 - Linux v3.19-8784-gb2b89ebfc0f0 * Wed Feb 18 2015 Kyle McMartin - 3.20.0-0.rc0.git8.2 - kernel-arm64.patch: Revert dropping some of the xgene fixes we carried against upstream. (#1193875) - kernel-arm64-fix-psci-when-pg.patch: make it simpler. - config-arm64: turn on CONFIG_DEBUG_SECTION_MISMATCH. * Wed Feb 18 2015 Josh Boyer - 3.20.0-0.rc0.git8.1 - Linux v3.19-8217-gcc4f9c2a91b7 * Tue Feb 17 2015 Kyle McMartin - 3.20.0-0.rc0.git7.3 - kernel-arm64.patch turned on. * Tue Feb 17 2015 Kyle McMartin - 3.20.0-0.rc0.git7.2 - kernel-arm64.patch merge, but leave it off. - kernel-arm64-fix-psci-when-pg.patch: when -pg (because of ftrace) is enabled we must explicitly annotate which registers should be assigned, otherwise gcc will do unexpected things behind our backs. * Tue Feb 17 2015 Josh Boyer - 3.20.0-0.rc0.git7.1 - Linux v3.19-7478-g796e1c55717e - DRM merge * Mon Feb 16 2015 Josh Boyer - CVE-XXXX-XXXX potential memory corruption in vhost/scsi driver (rhbz 1189864 1192079) - CVE-2015-1593 stack ASLR integer overflow (rhbz 1192519 1192520) * Mon Feb 16 2015 Peter Robinson - Minor updates for ARMv7/ARM64 * Mon Feb 16 2015 Josh Boyer - 3.20.0-0.rc0.git6.1 - Linux v3.19-6676-g1fa185ebcbce * Fri Feb 13 2015 Josh Boyer - 3.20.0-0.rc0.git5.1 - Linux v3.19-5015-gc7d7b9867155 * Thu Feb 12 2015 Josh Boyer - 3.20.0-0.rc0.git4.1 - Linux v3.19-4542-g8cc748aa76c9 * Thu Feb 12 2015 Josh Boyer - 3.20.0-0.rc0.git3.1 - Linux v3.19-4020-gce01e871a1d4 * Wed Feb 11 2015 Josh Boyer - 3.20.0-0.rc0.git2.1 - Linux v3.19-2595-gc5ce28df0e7c * Wed Feb 11 2015 Josh Boyer - 3.20.0-0.rc0.git1.1 - Linux v3.19-463-g3e8c04eb1174 - Reenable debugging options. - Temporarily disable aarch64 patches * Mon Feb 9 2015 Alexandre Oliva -libre - GNU Linux-libre 3.19-gnu. * Mon Feb 09 2015 Josh Boyer - 3.19.0-1 - Linux v3.19 * Sat Feb 07 2015 Josh Boyer - 3.19.0-0.rc7.git3.1 - Linux v3.19-rc7-189-g26cdd1f76a88 * Thu Feb 5 2015 Peter Robinson - Allwinner A23 (sun8i) SoC - Move ARM usb platform options to arm-generic * Thu Feb 05 2015 Josh Boyer - 3.19.0-0.rc7.git2.1 - Linux v3.19-rc7-32-g5ee0e962603e * Wed Feb 04 2015 Josh Boyer - 3.19.0-0.rc7.git1.1 - Linux v3.19-rc7-22-gdc6d6844111d * Tue Feb 03 2015 Josh Boyer - 3.19.0-0.rc7.git0.3 - Add patch to fix NFS backtrace (rhbz 1188638) * Tue Feb 3 2015 Alexandre Oliva -libre - GNU Linux-libre 3.19-rc7-gnu. * Mon Feb 02 2015 Josh Boyer - 3.19.0-0.rc7.git0.1 - Linux v3.19-rc7 - Disable debugging options. * Fri Jan 30 2015 Josh Boyer - 3.19.0-0.rc6.git3.1 - Linux v3.19-rc6-142-g1c999c47a9f1 * Thu Jan 29 2015 Josh Boyer - Backport patch from Rob Clark to toggle i915 state machine checks * Thu Jan 29 2015 Peter Robinson - More ARMv7 updates - A few more sound config cleanups * Wed Jan 28 2015 Josh Boyer - 3.19.0-0.rc6.git2.1 - Linux v3.19-rc6-105-gc59c961ca511 * Tue Jan 27 2015 Josh Boyer - Enable SND_SOC and the button array driver on x86 for Baytrail devices * Tue Jan 27 2015 Josh Boyer - 3.19.0-0.rc6.git1.1 - Linux v3.19-rc6-21-g4adca1cbc4ce - Reenable debugging options. * Mon Jan 26 2015 Alexandre Oliva -libre Sun Feb 1 - GNU Linux-libre 3.19-rc6-gnu. * Mon Jan 26 2015 Josh Boyer - 3.19.0-0.rc6.git0.1 - Linux v3.19-rc6 - Remove symbolic link hunk from patch-3.19-rc6 (rbhz 1185928) - Disable debugging options. * Thu Jan 22 2015 Josh Boyer - 3.19.0-0.rc5.git2.1 - Linux v3.19-rc5-134-gf8de05ca38b7 * Wed Jan 21 2015 Josh Boyer - 3.19.0-0.rc5.git1.1 - Linux v3.19-rc5-117-g5eb11d6b3f55 - Reenable debugging options. * Tue Jan 20 2015 Peter Robinson - More ARM config option cleanups * Mon Jan 19 2015 Josh Boyer - 3.19.0-0.rc5.git0.1 - Linux v3.19-rc5 - Disable debugging options. * Sat Jan 17 2015 Peter Robinson - Move Rockchip to ARMv7 generic to support rk32xx on LPAE - Enable Device Tree Overlays for dynamic DTB - ARM config updates * Fri Jan 16 2015 Josh Boyer - 3.19.0-0.rc4.git4.1 - Linux v3.19-rc4-155-gcb59670870d9 * Thu Jan 15 2015 Josh Boyer - Re-enable BUILD_DOCSRC * Thu Jan 15 2015 Josh Boyer - 3.19.0-0.rc4.git3.1 - Linux v3.19-rc4-141-gf800c25b7a76 * Wed Jan 14 2015 Josh Boyer - 3.19.0-0.rc4.git2.1 - Linux v3.19-rc4-46-g188c901941ef - Enable I40E_VXLAN (rhbz 1182116) * Tue Jan 13 2015 Peter Robinson - Enable Checkpoint/Restore on ARMv7 (rhbz 1146995) * Tue Jan 13 2015 Josh Boyer - Add installonlypkg(kernel) to kernel-devel subpackages (rhbz 1079906) * Tue Jan 13 2015 Josh Boyer - 3.19.0-0.rc4.git1.1 - Linux v3.19-rc4-23-g971780b70194 - Reenable debugging options. * Mon Jan 12 2015 Josh Boyer - 3.19.0-0.rc4.git0.1 - Linux v3.19-rc4 - Disable debugging options. * Mon Jan 12 2015 Josh Boyer - Backlight fixes for Samsung and Dell machines (rhbz 1094948 1115713) - Add various UAS quirks (rhbz 1124119) - Add patch to fix loop in VDSO (rhbz 1178975) * Fri Jan 09 2015 Josh Boyer - 3.19.0-0.rc3.git2.1 - Linux v3.19-rc3-69-g11c8f01b423b * Wed Jan 07 2015 Kyle McMartin - 3.19.0-0.rc3.git1.2 - kernel-arm64.patch: fix up build... no idea if it works. * Wed Jan 07 2015 Josh Boyer - CVE-2014-9529 memory corruption or panic during key gc (rhbz 1179813 1179853) * Wed Jan 07 2015 Josh Boyer - 3.19.0-0.rc3.git1.1 - Linux v3.19-rc3-38-gbdec41963890 - Enable POWERCAP and INTEL_RAPL options - Reenable debugging options. * Tue Jan 06 2015 Josh Boyer - Linux v3.19-rc3 * Mon Jan 05 2015 Josh Boyer - Linux v3.19-rc2 - Temporarily disable aarch64patches - Happy New Year * Sun Dec 28 2014 Josh Boyer - Enable F2FS (rhbz 972446) * Thu Dec 18 2014 Josh Boyer - 3.18.1-2 - CVE-2014-8989 userns can bypass group restrictions (rhbz 1170684 1170688) - Fix from Kyle McMartin for target_core_user uapi issue since it's enabled - Fix dm-cache crash (rhbz 1168434) - Fix blk-mq crash on CPU hotplug (rhbz 1175261) * Wed Dec 17 2014 Alexandre Oliva -libre Fri Dec 19 - GNU Linux-libre 3.18.1-gnu. * Wed Dec 17 2014 Josh Boyer - 3.18.1-1 - Linux v3.18.1 - CVE-2014-XXXX isofs: infinite loop in CE record entries (rhbz 1175235 1175250) - Enable TCM_USER (rhbz 1174986) - Enable USBIP in modules-extra from Johnathan Dieter (rhbz 1169478) * Tue Dec 16 2014 Josh Boyer - 3.18.0-2 - Add patch from Josh Stone to restore var-tracking via Kconfig (rhbz 1126580) * Mon Dec 15 2014 Josh Boyer - Fix ppc64 boot with smt-enabled=off (rhbz 1173806) - CVE-2014-8133 x86: espfix(64) bypass via set_thread_area and CLONE_SETTLS (rhbz 1172797 1174374) - CVE-2014-8559 deadlock due to incorrect usage of rename_lock (rhbz 1159313 1173814) * Fri Dec 12 2014 Kyle McMartin - build in ahci_platform on aarch64 temporarily. * Fri Dec 12 2014 Josh Boyer - Remove pointless warning in cfg80211 (rhbz 1172543) * Thu Dec 11 2014 Kyle McMartin - kernel-arm64.patch: update from git. * Wed Dec 10 2014 Josh Boyer - Fix UAS crashes with Seagate and Fresco Logic drives (rhbz 1164945) - CVE-2014-8134 fix espfix for 32-bit KVM paravirt guests (rhbz 1172765 1172769) * Tue Dec 9 2014 Alexandre Oliva -libre - GNU Linux-libre 3.18-gnu. * Tue Dec 09 2014 Josh Boyer - 3.18.0-1 - Linux v3.18 * Fri Dec 05 2014 Josh Boyer - 3.18.0-0.rc7.git3.1 - Linux v3.18-rc7-59-g56c67ce187a8 * Thu Dec 04 2014 Josh Boyer - 3.18.0-0.rc7.git2.1 - Linux v3.18-rc7-48-g7cc78f8fa02c * Wed Dec 03 2014 Josh Boyer - 3.18.0-0.rc7.git1.1 - Linux v3.18-rc7-3-g3a18ca061311 * Tue Dec 2 2014 Alexandre Oliva -libre - GNU Linux-libre 3.18-rc7-gnu. * Mon Dec 01 2014 Josh Boyer - 3.18.0-0.rc7.git0.1 - Linux v3.18-rc7 * Thu Nov 27 2014 Josh Boyer - 3.18.0-0.rc6.git1.1 - Linux v3.18-rc6-28-g3314bf6ba2ac - Gobble Gobble * Tue Nov 25 2014 Alexandre Oliva -libre - GNU Linux-libre 3.18-rc6-gnu. * Mon Nov 24 2014 Josh Boyer - Linux v3.18-rc6 - Add quirk for Laser Mouse 6000 (rhbz 1165206) * Fri Nov 21 2014 Josh Boyer - Move TPM drivers to main kernel package (rhbz 1164937) * Wed Nov 19 2014 Josh Boyer - Disable SERIAL_8250 on s390x (rhbz 1158848) * Mon Nov 17 2014 Kyle McMartin - 3.18.0-0.rc5.git0.2 - Re-merge kernel-arm64.patch * Mon Nov 17 2014 Josh Boyer - 3.18.0-0.rc5.git0.1 - Linux v3.18-rc5 - Disable debugging options. * Fri Nov 14 2014 Josh Boyer - Enable I40EVF driver (rhbz 1164029) * Fri Nov 14 2014 Josh Boyer - 3.18.0-0.rc4.git2.1 - Linux v3.18-rc4-184-gb23dc5a7cc6e * Thu Nov 13 2014 Josh Boyer - Add patch for MS Surface Pro 3 Type Cover (rhbz 1135338) - CVE-2014-7843 aarch64: copying from /dev/zero causes local DoS (rhbz 1163744 1163745) * Thu Nov 13 2014 Josh Boyer - 3.18.0-0.rc4.git1.1 - Linux v3.18-rc4-52-g04689e749b7e - Reenable debugging options. * Wed Nov 12 2014 Josh Boyer - CVE-2014-7841 sctp: NULL ptr deref on malformed packet (rhbz 1163087 1163095) * Tue Nov 11 2014 Kyle McMartin - 3.18.0-0.rc4.git0.2 - Re-enable kernel-arm64.patch, and fix up merge conflicts with 3.18-rc4 * Mon Nov 10 2014 Josh Boyer - Fix Samsung pci-e SSD handling on some macbooks (rhbz 1161805) * Mon Nov 10 2014 Josh Boyer - 3.18.0-0.rc4.git0.1 - Linux v3.18-rc4 - Temporarily disable aarch64patches - Disable debugging options. * Fri Nov 07 2014 Josh Boyer - 3.18.0-0.rc3.git4.1 - Linux v3.18-rc3-82-ged78bb846e8b * Thu Nov 06 2014 Josh Boyer - 3.18.0-0.rc3.git3.1 - Linux v3.18-rc3-68-g20f3963d8f48 * Wed Nov 05 2014 Josh Boyer - 3.18.0-0.rc3.git2.1 - Linux v3.18-rc3-61-ga1cff6e25e6e * Tue Nov 04 2014 Josh Boyer - 3.18.0-0.rc3.git1.1 - Linux v3.18-rc3-31-g980d0d51b1c9 - Reenable debugging options. * Mon Nov 03 2014 Josh Boyer - Enable CONFIG_KXCJK1013 - Add driver for goodix touchscreen from Bastien Nocera * Mon Nov 03 2014 Josh Boyer - 3.18.0-0.rc3.git0.1 - Linux v3.18-rc3 - Disable debugging options. * Thu Oct 30 2014 Josh Boyer - 3.18.0-0.rc2.git3.1 - Linux v3.18-rc2-106-ga7ca10f263d7 * Wed Oct 29 2014 Josh Boyer - 3.18.0-0.rc2.git2.1 - Linux v3.18-rc2-53-g9f76628da20f * Tue Oct 28 2014 Josh Boyer - Add quirk for rfkill on Yoga 3 machines (rhbz 1157327) * Tue Oct 28 2014 Josh Boyer - 3.18.0-0.rc2.git1.1 - Linux v3.18-rc2-43-gf7e87a44ef60 - Add two RCU patches to fix a deadlock and a hang - Reenable debugging options. * Mon Oct 27 2014 Josh Boyer - 3.18.0-0.rc2.git0.1 - Linux v3.18-rc2 - Disable debugging options. * Sun Oct 26 2014 Peter Robinson - Update ARM config options, some minor cleanups * Sun Oct 26 2014 Josh Boyer - 3.18.0-0.rc1.git4.1 - Linux v3.18-rc1-422-g2cc91884b6b3 * Fri Oct 24 2014 Josh Boyer - 3.18.0-0.rc1.git3.3 - CVE-2014-3610 kvm: noncanonical MSR writes (rhbz 1144883 1156543) - CVE-2014-3611 kvm: PIT timer race condition (rhbz 1144878 1156537) - CVE-2014-3646 kvm: vmx: invvpid vm exit not handled (rhbz 1144825 1156534) - CVE-2014-8369 kvm: excessive pages un-pinning in kvm_iommu_map error path (rhbz 1156518 1156522) - CVE-2014-8480 CVE-2014-8481 kvm: NULL pointer dereference during rip relative instruction emulation (rhbz 1156615 1156616) * Fri Oct 24 2014 Josh Boyer - 3.18.0-0.rc1.git3.1 - Linux v3.18-rc1-280-g816fb4175c29 - Add touchpad quirk for Fujitsu Lifebook A544/AH544 models (rhbz 1111138) * Wed Oct 22 2014 Josh Boyer - 3.18.0-0.rc1.git2.1 - Linux v3.18-rc1-221-gc3351dfabf5c - Add patch to fix wifi on X550VB machines (rhbz 1089731) * Tue Oct 21 2014 Josh Boyer - Drop pinctrl qcom revert now that it's dependencies should be merged * Tue Oct 21 2014 Kyle McMartin - 3.18.0-0.rc1.git1.2 - Re-enable kernel-arm64.patch after updating. - CONFIG_SERIAL_8250_FINTEK moved to generic since it appears on x86-generic and arm64 now. - CONFIG_IMX_THERMAL=n added to config-arm64. - arm64: disable BPF_JIT temporarily * Tue Oct 21 2014 Josh Boyer - 3.18.0-0.rc1.git1.1 - Linux v3.18-rc1-68-gc2661b806092 - Make LOG_BUF_SHIFT on arm64 the same as the rest of the arches (rhbz 1123327) - Enable RTC PL031 driver on arm64 (rhbz 1123882) - Reenable debugging options. * Mon Oct 20 2014 Josh Boyer - 3.18.0-0.rc1.git0.1 - Linux v3.18-rc1 - Disable debugging options. * Fri Oct 17 2014 Josh Boyer - 3.18.0-0.rc0.git9.4 - CVE-2014-8086 ext4: race condition (rhbz 1151353 1152608) - Enable B43_PHY_G to fix b43 driver regression (rhbz 1152502) * Wed Oct 15 2014 Josh Boyer - 3.18.0-0.rc0.git9.3 - Revert Btrfs ro snapshot commit that causes filesystem corruption * Wed Oct 15 2014 Josh Boyer - 3.18.0-0.rc0.git9.1 - Linux v3.17-9670-g0429fbc0bdc2 * Tue Oct 14 2014 Josh Boyer - Add patches to fix elantech touchscreens (rhbz 1149509) * Tue Oct 14 2014 Josh Boyer - 3.18.0-0.rc0.git8.1 - Linux v3.17-9283-g2d65a9f48fcd * Tue Oct 14 2014 Josh Boyer - 3.18.0-0.rc0.git7.1 - Linux v3.17-8307-gf1d0d14120a8 * Mon Oct 13 2014 Peter Robinson - Update armv7/aarch64 config options * Mon Oct 13 2014 Josh Boyer - 3.18.0-0.rc0.git6.1 - Linux v3.17-7872-g5ff0b9e1a1da * Sun Oct 12 2014 Josh Boyer - 3.18.0-0.rc0.git5.1 - Linux v3.17-7639-g90eac7eee2f4 * Sun Oct 12 2014 Josh Boyer - Enable CONFIG_I2C_DESIGNWARE_PCI (rhbz 1045821) * Fri Oct 10 2014 Josh Boyer - CVE-2014-7970 VFS: DoS with USER_NS (rhbz 1151095 1151484) * Fri Oct 10 2014 Josh Boyer - 3.18.0-0.rc0.git4.1 - Linux v3.17-6136-gc798360cd143 * Thu Oct 09 2014 Josh Boyer - 3.18.0-0.rc0.git3.1 - Linux v3.17-5585-g782d59c5dfc5 * Thu Oct 09 2014 Josh Boyer - 3.18.0-0.rc0.git2.1 - Linux v3.17-5503-g35a9ad8af0bb * Wed Oct 08 2014 Josh Boyer - 3.18.0-0.rc0.git1.1 - Linux v3.17-2860-gef0625b70dac - Reenable debugging options. - Temporarily disable aarch64patches - Add patch to fix ATA blacklist * Tue Oct 07 2014 Josh Boyer - Add patch to fix GFS2 regression (from Bob Peterson) * Mon Oct 06 2014 Kyle McMartin - enable 64K pages on arm64... (presently) needed to boot on amd seattle platforms due to physical memory being unreachable. * Mon Oct 6 2014 Alexandre Oliva -libre - GNU Linux-libre 3.17-gnu. * Mon Oct 06 2014 Josh Boyer - 3.17.0-1 - Linux v3.17 * Fri Oct 03 2014 Josh Boyer - 3.17.0-0.rc7.git3.1 - Linux v3.17-rc7-76-g58586869599f - Various ppc64/ppc64le config changes * Thu Oct 02 2014 Josh Boyer - 3.17.0-0.rc7.git2.1 - Linux v3.17-rc7-46-g50dddff3cb9a - Cleanup dead Kconfig symbols in config-* from Paul Bolle * Wed Oct 01 2014 Kyle McMartin - Update kernel-arm64.patch from git, again... enable AMD_XGBE on arm64. * Wed Oct 01 2014 Josh Boyer - 3.17.0-0.rc7.git1.1 - Linux v3.17-rc7-6-gaad7fb916a10 * Tue Sep 30 2014 Kyle McMartin - 3.17.0-0.rc7.git0.2 - Revert some v3.16 changes to mach-highbank which broke L2 cache enablement. Will debug upstream separately, but we need F22/21 running there. (#1139762) * Tue Sep 30 2014 Peter Robinson - Don't build Exynos4 on lpae kernel - Add dts for BananaPi - Minor ARM updates - Build 6lowpan modules * Mon Sep 29 2014 Kyle McMartin - Update kernel-arm64.patch from git. * Mon Sep 29 2014 Alexandre Oliva -libre - GNU Linux-libre 3.17-rc7-gnu. * Mon Sep 29 2014 Josh Boyer - 3.17.0-0.rc7.git0.1 - Linux v3.17-rc7 * Wed Sep 24 2014 Josh Boyer - 3.17.0-0.rc6.git2.1 - Linux v3.17-rc6-180-g452b6361c4d9 * Tue Sep 23 2014 Josh Boyer - Fix return code when adding keys (rhbz 1145318) - Add patch to fix XPS 13 touchpad issue (rhbz 1123584) * Tue Sep 23 2014 Josh Boyer - 3.17.0-0.rc6.git1.1 - Linux v3.17-rc6-125-gf3670394c29f * Mon Sep 22 2014 Alexandre Oliva -libre Sun Sep 28 - GNU Linux-libre 3.17-rc6-gnu. * Mon Sep 22 2014 Josh Boyer - 3.17.0-0.rc6.git0.1 - Linux v3.17-rc6 - Revert EFI GOT fixes as it causes boot failures - Disable debugging options. * Fri Sep 19 2014 Josh Boyer - 3.17.0-0.rc5.git5.1 - Linux v3.17-rc5-105-g598a0c7d0932 * Fri Sep 19 2014 Josh Boyer - Disable NO_HZ_FULL again - Enable early microcode loading (rhbz 1083716) * Fri Sep 19 2014 Josh Boyer - 3.17.0-0.rc5.git4.1 - Linux v3.17-rc5-63-gd9773ceabfaf - Enable infiniband on s390x * Thu Sep 18 2014 Josh Boyer - 3.17.0-0.rc5.git3.1 - Linux v3.17-rc5-25-g8ba4caf1ee15 * Wed Sep 17 2014 Kyle McMartin - I also like to live dangerously. (Re-enable RCU_FAST_NO_HZ which has been off since April 2012. Also enable NO_HZ_FULL on x86_64.) - I added zipped modules ages ago, remove it from TODO. * Wed Sep 17 2014 Josh Boyer - 3.17.0-0.rc5.git2.1 - Linux v3.17-rc5-24-g37504a3be90b - Fix vmwgfx header include (rhbz 1138759) * Tue Sep 16 2014 Josh Boyer - 3.17.0-0.rc5.git1.1 - Linux v3.17-rc5-13-g2324067fa9a4 - Reenable debugging options. * Mon Sep 15 2014 Josh Boyer - 3.17.0-0.rc5.git0.1 - Linux v3.17-rc5 - Disable debugging options. * Fri Sep 12 2014 Josh Boyer - 3.17.0-0.rc4.git4.1 - Linux v3.17-rc4-244-g5874cfed0b04 * Thu Sep 11 2014 Josh Boyer - Enable ACPI_I2C_OPREGION * Thu Sep 11 2014 Josh Boyer - 3.17.0-0.rc4.git3.1 - Linux v3.17-rc4-168-g7ec62d421bdf - Add support for touchpad in Asus X450 and X550 (rhbz 1110011) * Wed Sep 10 2014 Josh Boyer - 3.17.0-0.rc4.git2.1 - Linux v3.17-rc4-158-ge874a5fe3efa - Add patch to fix oops on keyring gc (rhbz 1116347) * Tue Sep 09 2014 Josh Boyer - 3.17.0-0.rc4.git1.1 - Linux v3.17-rc4-140-g8c68face5548 - Reenable debugging options. * Mon Sep 08 2014 Josh Boyer - Remove ppc32 support * Mon Sep 8 2014 Peter Robinson - Build tools on ppc64le (rhbz 1138884) - Some minor ppc64 cleanups * Mon Sep 08 2014 Josh Boyer - 3.17.0-0.rc4.git0.1 - Linux v3.17-rc4 - Disable debugging options. * Fri Sep 05 2014 Josh Boyer - 3.17.0-0.rc3.git3.1 - Linux v3.17-rc3-94-gb7fece1be8b1 * Thu Sep 04 2014 Josh Boyer - 3.17.0-0.rc3.git2.1 - Linux v3.17-rc3-63-g44bf091f5089 - Enable kexec bzImage signature verification (from Vivek Goyal) - Add support for Wacom Cintiq Companion from Benjamin Tissoires (rhbz 1134969) * Wed Sep 03 2014 Josh Boyer - 3.17.0-0.rc3.git1.1 - Linux v3.17-rc3-16-g955837d8f50e - Reenable debugging options. * Tue Sep 02 2014 Josh Boyer - Remove with_extra switch * Mon Sep 01 2014 Josh Boyer - 3.17.0-0.rc3.git0.1 - Linux v3.17-rc3 - Disable debugging options. * Fri Aug 29 2014 Josh Boyer - 3.17.0-0.rc2.git3.1 - Linux v3.17-rc2-89-g59753a805499 * Thu Aug 28 2014 Josh Boyer - Fix NFSv3 ACL regression (rhbz 1132786) * Thu Aug 28 2014 Josh Boyer - 3.17.0-0.rc2.git2.1 - Linux v3.17-rc2-42-gf1bd473f95e0 - Don't enable CONFIG_DEBUG_WW_MUTEX_SLOWPATH (rhbz 1114160) * Wed Aug 27 2014 Josh Boyer - 3.17.0-0.rc2.git1.1 - Disable streams on via XHCI (rhbz 1132666) - Linux v3.17-rc2-9-g68e370289c29 - Reenable debugging options. * Tue Aug 26 2014 Peter Robinson - Minor tegra updates due to incorrect nvidia kernel config options * Tue Aug 26 2014 Josh Boyer - 3.17.0-0.rc2.git0.1 - Linux v3.17-rc2 - Fixup ARM MFD options after I2C=y change - Disable debugging options. * Tue Aug 26 2014 Peter Robinson - Minor generic ARMv7 updates - Build tegra on both LPAE and general ARMv7 kernels (thank srwarren RHBZ 1110963) - Set CMA to 64mb on LPAE kernel (RHBZ 1127000) * Mon Aug 25 2014 Josh Boyer - 3.17.0-0.rc1.git4.1 - Linux v3.17-rc1-231-g7be141d05549 - Add patch to fix NFS oops on /proc removal (rhbz 1132368) * Fri Aug 22 2014 Josh Boyer - Drop userns revert patch (rhbz 917708) * Fri Aug 22 2014 Josh Boyer - 3.17.0-0.rc1.git3.1 - Linux v3.17-rc1-99-g5317821c0853 * Thu Aug 21 2014 Josh Boyer - 3.17.0-0.rc1.git2.1 - Linux v3.17-rc1-51-g372b1dbdd1fb * Wed Aug 20 2014 Josh Boyer - 3.17.0-0.rc1.git1.1 - Linux v3.17-rc1-22-g480cadc2b7e0 - Reenable debugging options. * Mon Aug 18 2014 Josh Boyer - 3.17.0-0.rc1.git0.1 - Linux v3.17-rc1 - Disable debugging options. * Sat Aug 16 2014 Josh Boyer - 3.17.0-0.rc0.git7.1 - Linux v3.16-11452-g88ec63d6f85c * Fri Aug 15 2014 Josh Boyer - 3.17.0-0.rc0.git6.1 - Linux v3.16-11383-gc9d26423e56c * Thu Aug 14 2014 Kyle McMartin - kernel-arm64: resynch with git head (no functional change) * Thu Aug 14 2014 Josh Boyer - 3.17.0-0.rc0.git5.1 - Linux v3.16-10959-gf0094b28f303 * Wed Aug 13 2014 Peter Robinson - 3.17 ARMv7 updates - Cleanup some old removed options - Disable legacy USB OTG (using new configfs equivilents) * Tue Aug 12 2014 Kyle McMartin 3.17.0-0.rc0.git4.2 - tegra-powergate-header-move.patch: deal with armv7hl breakage - nouveau_platform-fix.patch: handle nouveau_dev() removal * Tue Aug 12 2014 Josh Boyer - 3.17.0-0.rc0.git4.1 - Add updated crash driver from Dave Anderson and re-enable * Tue Aug 12 2014 Kyle McMartin - kernel-arm64.patch: fix up merge conflict and re-enable * Tue Aug 12 2014 Josh Boyer - Linux v3.16-10473-gc8d6637d0497 * Sat Aug 09 2014 Josh Boyer - 3.17.0-0.rc0.git3.1 - Linux v3.16-10013-gc309bfa9b481 - Temporarily don't apply crash driver patch * Thu Aug 07 2014 Josh Boyer - 3.17.0-0.rc0.git2.1 - Linux v3.16-7503-g33caee39925b * Tue Aug 05 2014 Kyle McMartin - kernel-arm64.patch: fix up merge conflict and re-enable * Tue Aug 05 2014 Josh Boyer - 3.17.0-0.rc0.git1.1 - Linux v3.16-3652-gf19107379dbc - Reenable debugging options. * Tue Aug 5 2014 Alexandre Oliva -libre Thu Aug 7 - GNU Linux-libre 3.16-gnu. * Mon Aug 04 2014 Josh Boyer - 3.16.0-1 - Linux v3.16 - Disable debugging options. * Sun Aug 3 2014 Peter Robinson - Minor config updates for Armada and Sunxi ARM devices * Fri Aug 01 2014 Josh Boyer - 3.16.0-0.rc7.git4.1 - Linux v3.16-rc7-84-g6f0928036bcb * Thu Jul 31 2014 Josh Boyer - 3.16.0-0.rc7.git3.1 - Linux v3.16-rc7-76-g3a1122d26c62 * Wed Jul 30 2014 Kyle McMartin - kernel-arm64.patch: fix up merge conflict and re-enable * Wed Jul 30 2014 Josh Boyer - 3.16.0-0.rc7.git2.1 - Linux v3.16-rc7-64-g26bcd8b72563 - Temporarily disable aarch64patches * Wed Jul 30 2014 Josh Boyer - Apply different patch from Milan Broz to fix LUKS partitions (rhbz 1115120) * Tue Jul 29 2014 Kyle McMartin - kernel-arm64.patch: update from upstream git. * Tue Jul 29 2014 Josh Boyer - 3.16.0-0.rc7.git1.1 - Linux v3.16-rc7-7-g31dab719fa50 - Reenable debugging options. * Mon Jul 28 2014 Josh Boyer - Make sure acpi brightness_switch is disabled (like forever in Fedora) - CVE-2014-5077 sctp: fix NULL ptr dereference (rhbz 1122982 1123696) * Mon Jul 28 2014 Josh Boyer - 3.16.0-0.rc7.git0.1 - Linux v3.16-rc7 - Disable debugging options. * Mon Jul 28 2014 Peter Robinson - Add patch to fix loading of tegra drm using device tree * Sat Jul 26 2014 Josh Boyer - 3.16.0-0.rc6.git3.1 - Linux v3.16-rc6-139-g9c5502189fa0 * Fri Jul 25 2014 Josh Boyer - 3.16.0-0.rc6.git2.1 - Linux v3.16-rc6-118-g82e13c71bc65 - Fix selinux sock_graft hook for AF_ALG address family (rhbz 1115120) * Thu Jul 24 2014 Kyle McMartin - kernel-arm64.patch: update from upstream git. - arm64: update config-arm64 to include PCI support. * Thu Jul 24 2014 Josh Boyer - CVE-2014-5045 vfs: refcount issues during lazy umount on symlink (rhbz 1122471 1122482) - Fix regression in sched_setparam (rhbz 1117942) * Tue Jul 22 2014 Justin M. Forbes - 3.16.0-0.rc6.git1.1 - Linux v3.16-rc6-75-g15ba223 - Reenable debugging options. * Mon Jul 21 2014 Justin M. Forbes - 3.16.0-0.rc6.git0.1 - Linux v3.16-rc6 - Disable debugging options. * Mon Jul 21 2014 Peter Robinson - Minor ARMv7 config update * Thu Jul 17 2014 Josh Boyer - 3.16.0-0.rc5.git2.1 - Linux v3.16-rc5-143-gb6603fe574af * Wed Jul 16 2014 Josh Boyer - Enable hermes prism driver (rhbz 1120393) * Wed Jul 16 2014 Josh Boyer - 3.16.0-0.rc5.git1.1 - Linux v3.16-rc5-130-g2da294474093 - Reenable debugging options. * Mon Jul 14 2014 Josh Boyer - 3.16.0-0.rc5.git0.1 - Linux v3.16-rc5 - Fix i915 regression with external monitors (rhbz 1117008) - Disable debugging options. * Sat Jul 12 2014 Tom Callaway - Fix license handling (I hope) * Fri Jul 11 2014 Josh Boyer - 3.16.0-0.rc4.git3.1 - Linux v3.16-rc4-120-g85d90faed31e * Thu Jul 10 2014 Peter Robinson - Rebase Utilute and BeagleBone patches - Minor ARM updates - Enable ISL12057 RTC for ARM (NetGear ReadyNAS) * Wed Jul 09 2014 Josh Boyer - 3.16.0-0.rc4.git2.1 - Linux v3.16-rc4-28-g163e40743f73 - Fix bogus vdso .build-id links (rhbz 1117563) * Tue Jul 08 2014 Josh Boyer - 3.16.0-0.rc4.git1.1 - Linux v3.16-rc4-20-g448bfad8a185 - Reenable debugging options. * Sun Jul 06 2014 Josh Boyer - 3.16.0-0.rc4.git0.1 - Linux v3.16-rc4 - Disable debugging options. * Fri Jul 04 2014 Josh Boyer - 3.16.0-0.rc3.git3.1 - Linux v3.16-rc3-149-g034a0f6b7db7 * Wed Jul 02 2014 Josh Boyer - 3.16.0-0.rc3.git2.1 - Linux v3.16-rc3-62-gd92a333a65a1 - Add patch to fix virt_blk oops (rhbz 1113805) * Wed Jul 02 2014 Kyle McMartin - arm64: build-in ahci, ethernet, and rtc drivers. * Tue Jul 01 2014 Josh Boyer - 3.16.0-0.rc3.git1.1 - Linux v3.16-rc3-6-g16874b2cb867 - Reenable debugging options. * Tue Jul 1 2014 Peter Robinson - Minor ARMv7 cleanup * Mon Jun 30 2014 Kyle McMartin - kernel-arm64.patch, update from git. * Mon Jun 30 2014 Josh Boyer - 3.16.0-0.rc3.git0.1.1 - Linux v3.16-rc3 - Enable USB rtsx drivers (rhbz 1114229) - Disable debugging options. * Fri Jun 27 2014 Josh Boyer - 3.16.0-0.rc2.git4.1 - Linux v3.16-rc2-222-g3493860c76eb * Fri Jun 27 2014 Hans de Goede - Add patch to fix wifi on lenove yoga 2 series (rhbz#1021036) * Thu Jun 26 2014 Josh Boyer - Enable rtl8192ee (rhbz 1113422) * Thu Jun 26 2014 Kyle McMartin - 3.16.0-0.rc2.git3.2 - Add kernel-arm64.patch, which contains AArch64 support destined for upstream. ssh://git.fedorahosted.org/git/kernel-arm64.git is Mark Salter's source tree integrating these patches on the devel branch. I've added a twiddle to the top of the spec file to disable the aarch64 patchset, and also set aarch64 to nobuildarches, so we still get kernel-headers, but no one accidentally installs a non-booting kernel if the patchset causes rejects during a rebase. * Thu Jun 26 2014 Josh Boyer - Trimmed changelog, see fedpkg git for earlier history. * Thu Jun 26 2014 Josh Boyer - 3.16.0-0.rc2.git3.1 - Linux v3.16-rc2-211-gd7933ab727ed * Wed Jun 25 2014 Josh Boyer - 3.16.0-0.rc2.git2.1 - Linux v3.16-rc2-69-gd91d66e88ea9 * Wed Jun 25 2014 Josh Boyer - Revert commit that breaks Wacom Intuos4 from Benjamin Tissoires * Tue Jun 24 2014 Josh Boyer - 3.16.0-0.rc2.git1.1 - Linux v3.16-rc2-35-g8b8f5d971584 - Reenable debugging options. * Mon Jun 23 2014 Josh Boyer - CVE-2014-4508 BUG in x86_32 syscall auditing (rhbz 1111590 1112073) * Mon Jun 23 2014 Josh Boyer - 3.16.0-0.rc2.git0.1 - Linux v3.16-rc2 - Disable debugging options. * Sun Jun 22 2014 Peter Robinson - Enable Exynos now it's finally multi platform capable - Minor TI Keystone update - ARM config cleanups * Fri Jun 20 2014 Josh Boyer - Bring in intel_pstate regression fixes for BayTrail (rhbz 1111920) * Fri Jun 20 2014 Josh Boyer - 3.16.0-0.rc1.git4.1 - Linux v3.16-rc1-215-g3c8fb5044583 * Thu Jun 19 2014 Josh Boyer - 3.16.0-0.rc1.git3.1 - Linux v3.16-rc1-112-g894e552cfaa3 * Thu Jun 19 2014 Peter Robinson - Add missing bits for NVIDIA Jetson TK1 (thanks Stephen Warren) * Wed Jun 18 2014 Josh Boyer - 3.16.0-0.rc1.git2.1 - Linux v3.16-rc1-17-ge99cfa2d0634 * Tue Jun 17 2014 Dennis Gilmore - when ipuv3 moved out of staging the config was renamed - adjust the config to suit * Tue Jun 17 2014 Josh Boyer - 3.16.0-0.rc1.git1.1 - Linux v3.16-rc1-2-gebe06187bf2a - Reenable debugging options. * Mon Jun 16 2014 Peter Robinson - Enable Qualcomm SoCs on ARM * Mon Jun 16 2014 Josh Boyer - 3.16.0-0.rc1.git0.1 - Linux v3.16-rc1 - Disable debugging options. * Mon Jun 16 2014 Peter Robinson - ARM config updates for 3.16 * Sat Jun 14 2014 Josh Boyer - 3.16.0-0.rc0.git11.1 - Linux v3.15-9930-g0e04c641b199 - Enable CONFIG_RCU_NOCB_CPU(_ALL) (rbhz 1109113) * Fri Jun 13 2014 Peter Robinson - Add patch to fix build failure on aarch64 * Fri Jun 13 2014 Josh Boyer - 3.16.0-0.rc0.git10.1 - Linux v3.15-9837-g682b7c1c8ea8 * Fri Jun 13 2014 Josh Boyer - 3.16.0-0.rc0.git9.1 - Linux v3.15-8981-g5c02c392cd23 * Fri Jun 13 2014 Josh Boyer - 3.16.0-0.rc0.git8.1 - Linux v3.15-8835-g859862ddd2b6 * Fri Jun 13 2014 Josh Boyer - 3.16.0-0.rc0.git7.1 - Linux v3.15-8556-gdfb945473ae8 * Fri Jun 13 2014 Josh Boyer - 3.16.0-0.rc0.git6.1 - Linux v3.15-8351-g9ee4d7a65383 * Thu Jun 12 2014 Josh Boyer - 3.16.0-0.rc0.git5.1 - Linux v3.15-8163-g5b174fd6472b * Thu Jun 12 2014 Josh Boyer - 3.16.0-0.rc0.git4.1 - Linux v3.15-7926-gd53b47c08d8f * Thu Jun 12 2014 Josh Boyer - 3.16.0-0.rc0.git3.1 - Linux v3.15-7378-g14208b0ec569 * Wed Jun 11 2014 Josh Boyer - 3.16.0-0.rc0.git2.1 - Linux v3.15-7283-gda85d191f58a * Tue Jun 10 2014 Josh Boyer - 3.16.0-0.rc0.git1.1 - Linux v3.15-7218-g3f17ea6dea8b - Reenable debugging options. * Tue Jun 10 2014 Alexandre Oliva -libre - GNU Linux-libre 3.15-gnu. * Mon Jun 09 2014 Josh Boyer - 3.15.0-1 - Linux v3.15 - Disable debugging options. * Mon Jun 9 2014 Peter Robinson - Enable USB_EHCI_HCD_ORION to fix USB on Marvell (fix boot for some devices) * Fri Jun 06 2014 Josh Boyer - 3.15.0-0.rc8.git4.1 - CVE-2014-3940 missing check during hugepage migration (rhbz 1104097 1105042) - Linux v3.15-rc8-81-g951e273060d1 * Thu Jun 05 2014 Josh Boyer - 3.15.0-0.rc8.git3.1 - Linux v3.15-rc8-72-g54539cd217d6 * Wed Jun 04 2014 Josh Boyer - 3.15.0-0.rc8.git2.1 - Linux v3.15-rc8-58-gd2cfd3105094 * Tue Jun 03 2014 Josh Boyer - Add filter-ppc64p7.sh because ppc64p7 is an entirely separate RPM arch * Tue Jun 03 2014 Josh Boyer - 3.15.0-0.rc8.git1.2 - Fixes from Hans de Goede for backlight and platform drivers on various machines. (rhbz 1025690 1012674 1093171 1097436 861573) * Tue Jun 03 2014 Josh Boyer - 3.15.0-0.rc8.git1.1 - Add patch to install libtraceevent plugins from Kyle McMartin - Linux v3.15-rc8-53-gcae61ba37b4c - Reenable debugging options. * Mon Jun 2 2014 Peter Robinson - Minor ARM MMC config updates * Mon Jun 2 2014 Alexandre Oliva -libre Sun Jun 8 - GNU Linux-libre 3.15-gnu-rc8. - Reenable firmware builds. Do not create noarch meta-package. * Mon Jun 02 2014 Josh Boyer - 3.15.0-0.rc8.git0.1 - Linux v3.15-rc8 - Disable debugging options. * Sat May 31 2014 Josh Boyer - 3.15.0-0.rc7.git4.2 - Add patch to fix dentry lockdep splat * Sat May 31 2014 Josh Boyer - 3.15.0-0.rc7.git4.1 - Linux v3.15-rc7-102-g1487385edb55 * Fri May 30 2014 Josh Boyer - 3.15.0-0.rc7.git3.1 - Linux v3.15-rc7-79-gfe45736f4134 - Disable CARL9170 on ppc64le * Thu May 29 2014 Josh Boyer - CVE-2014-3917 DoS with syscall auditing (rhbz 1102571 1102715) * Wed May 28 2014 Josh Boyer - 3.15.0-0.rc7.git2.1 - Linux v3.15-rc7-53-g4efdedca9326 * Wed May 28 2014 Josh Boyer - 3.15.0-0.rc7.git1.1 - Linux v3.15-rc7-40-gcd79bde29f00 - Reenable debugging options. * Mon May 26 2014 Josh Boyer - 3.15.0-0.rc7.git0.1 - Linux v3.15-rc7 - Disable debugging options. * Sun May 25 2014 Josh Boyer - 3.15.0-0.rc6.git1.1 - Linux v3.15-rc6-213-gdb1003f23189 - Reenable debugging options. * Thu May 22 2014 Josh Boyer - Enable CONFIG_R8723AU (rhbz 1100162) * Thu May 22 2014 Josh Boyer - 3.15.0-0.rc6.git0.1 - Linux v3.15-rc6 - Disable debugging options. * Wed May 21 2014 Josh Boyer - 3.15.0-0.rc5.git4.1 - Linux v3.15-rc5-270-gfba69f042ad9 * Tue May 20 2014 Josh Boyer - 3.15.0-0.rc5.git3.1 - Linux v3.15-rc5-157-g60b5f90d0fac * Mon May 19 2014 Dan Horák - kernel metapackage shouldn't depend on subpackages we don't build * Thu May 15 2014 Josh Boyer - 3.15.0-0.rc5.git2.9 - Fix build fail on s390x * Wed May 14 2014 Josh Boyer - 3.15.0-0.rc5.git2.8 - Enable autoprov for kernel module Provides (rhbz 1058331) - Enable xz compressed modules (from Kyle McMartin) * Tue May 13 2014 Josh Boyer - Don't try and merge local config changes on arches we aren't building * Tue May 13 2014 Josh Boyer - 3.15.0-0.rc5.git2.1 - Linux v3.15-rc5-77-g14186fea0cb0 * Mon May 12 2014 Josh Boyer - 3.15.0-0.rc5.git1.1 - Linux v3.15-rc5-9-g7e338c9991ec - Reenable debugging options. * Sat May 10 2014 Peter Robinson - Enable Marvell Dove support - Minor ARM cleanups - Disable some unneed drivers on ARM * Sat May 10 2014 Josh Boyer - 3.15.0-0.rc5.git0.1 - Linux v3.15-rc5 - Disable debugging options. * Fri May 09 2014 Josh Boyer - Move isofs to kernel-core * Fri May 09 2014 Josh Boyer - 3.15.0-0.rc4.git4.1 - Linux v3.15-rc4-320-gafcf0a2d9289 * Thu May 08 2014 Josh Boyer - 3.15.0-0.rc4.git3.1 - Linux v3.15-rc4-298-g9f1eb57dc706 * Wed May 07 2014 Josh Boyer - 3.15.0-0.rc4.git2.1 - Linux v3.15-rc4-260-g38583f095c5a * Tue May 06 2014 Josh Boyer - 3.15.0-0.rc4.git1.1 - Linux v3.15-rc4-202-g30321c7b658a - Reenable debugging options. * Mon May 5 2014 Peter Robinson - Fix some USB on ARM LPAE kernels * Mon May 05 2014 Kyle McMartin - Install arch/arm/include/asm/xen headers on aarch64, since the headers in arch/arm64/include/asm/xen reference them. * Mon May 05 2014 Josh Boyer - 3.15.0-0.rc4.git0.1 - Linux v3.15-rc4 - Disable debugging options. * Mon May 5 2014 Hans de Goede - Add use_native_brightness quirk for the ThinkPad T530 (rhbz 1089545) * Sun May 4 2014 Peter Robinson - General minor ARM cleanups * Sun May 04 2014 Josh Boyer - Fix k-m-e requires on k-m-uname-r provides - ONE MORE TIME WITH FEELING * Sat May 3 2014 Peter Robinson - Disable OMAP-3 boards (use DT) and some minor omap3 config updates * Sat May 03 2014 Josh Boyer - 3.15.0-0.rc3.git5.1 - Linux v3.15-rc3-159-g6c6ca9c2a5b9 * Sat May 03 2014 Josh Boyer - Add patch to fix HID rmi driver from Benjamin Tissoires (rhbz 1090161) * Sat May 03 2014 Josh Boyer - Fix up Provides on kernel-module variant packages - Enable CONFIG_USB_UAS unconditionally per Hans * Fri May 02 2014 Josh Boyer - 3.15.0-0.rc3.git4.1 - Linux v3.15-rc3-121-gb7270cce7db7 * Thu May 01 2014 Josh Boyer - Rename kernel-drivers to kernel-modules - Add kernel metapackages for all flavors, not just debug * Thu May 1 2014 Hans de Goede - Add use_native_backlight quirk for 4 laptops (rhbz 983342 1093120) * Wed Apr 30 2014 Josh Boyer - 3.15.0-0.rc3.git3.1 - Linux v3.15-rc3-82-g8aa9e85adac6 * Wed Apr 30 2014 Josh Boyer - Add kernel-debug metapackage when debugbuildsenabled is set * Wed Apr 30 2014 Josh Boyer - 3.15.0-0.rc3.git2.1 - Linux v3.15-rc3-62-ged8c37e158cb - Drop noarch from ExclusiveArch. Nothing is built as noarch * Tue Apr 29 2014 Josh Boyer - 3.15.0-0.rc3.git1.10 - Make depmod call fatal if it errors or warns * Tue Apr 29 2014 Josh Boyer - Introduce kernel-core/kernel-drivers split for F21 Feature work * Tue Apr 29 2014 Josh Boyer - 3.15.0-0.rc3.git1.1 - Linux v3.15-rc3-41-g2aafe1a4d451 - Reenable debugging options. * Mon Apr 28 2014 Josh Boyer - 3.15.0-0.rc3.git0.1 - Linux v3.15-rc3 - Disable debugging options. * Fri Apr 25 2014 Peter Robinson - Drop obsolete ARM LPAE patches * Fri Apr 25 2014 Josh Boyer - Add patch from Will Woods to fix fanotify EOVERFLOW issue (rhbz 696821) - Fix ACPI issue preventing boot on AMI firmware (rhbz 1090746) * Fri Apr 25 2014 Hans de Goede - Add synaptics min-max quirk for ThinkPad Edge E431 (rhbz#1089689) * Fri Apr 25 2014 Hans de Goede - Add a patch to add support for the mmc controller on sunxi ARM SoCs * Thu Apr 24 2014 Josh Boyer - 3.15.0-0.rc2.git3.1 - Linux v3.15-rc2-107-g76429f1dedbc * Wed Apr 23 2014 Josh Boyer - 3.15.0-0.rc2.git2.1 - Linux v3.15-rc2-69-g1aae31c8306e * Tue Apr 22 2014 Josh Boyer - 3.15.0-0.rc2.git1.1 - Linux v3.15-rc2-42-g4d0fa8a0f012 - Reenable debugging options. * Tue Apr 22 2014 Josh Boyer - Add patch to fix Synaptics touchscreens and HID rmi driver (rhbz 1089583) * Mon Apr 21 2014 Josh Boyer - 3.15.0-0.rc2.git0.1 - Linux v3.15-rc2 - Disable debugging options. * Fri Apr 18 2014 Josh Boyer - 3.15.0-0.rc1.git4.1 - Linux v3.15-rc1-137-g81cef0fe19e0 * Thu Apr 17 2014 Josh Boyer - 3.15.0-0.rc1.git3.1 - Linux v3.15-rc1-113-g6ca2a88ad820 - Build perf with unwind support via libdw (rhbz 1025603) * Thu Apr 17 2014 Hans de Goede - Update min/max quirk patch to add a quirk for the ThinkPad L540 (rhbz1088588) * Thu Apr 17 2014 Peter Robinson - Drop OMAP DRM hack to load encoder module now it fully supports DT (YAY!) * Wed Apr 16 2014 Josh Boyer - 3.15.0-0.rc1.git2.1 - Linux v3.15-rc1-49-g10ec34fcb100 * Tue Apr 15 2014 Josh Boyer - 3.15.0-0.rc1.git1.1 - Linux v3.15-rc1-12-g55101e2d6ce1 - Reenable debugging options. * Mon Apr 14 2014 Josh Boyer - 3.15.0-0.rc1.git0.1 - Linux v3.15-rc1 - Disable debugging options. - Turn SLUB_DEBUG off * Mon Apr 14 2014 Hans de Goede - Add min/max quirks for various new Thinkpad touchpads (rhbz 1085582 1085697) * Mon Apr 14 2014 Peter Robinson - Minor ARM config changes and cleanups for 3.15 merge window * Mon Apr 14 2014 Josh Boyer - CVE-2014-2851 net ipv4 ping refcount issue in ping_init_sock (rhbz 1086730 1087420) * Sun Apr 13 2014 Josh Boyer - 3.15.0-0.rc0.git13.1 - Linux v3.14-12812-g321d03c86732 * Fri Apr 11 2014 Josh Boyer - 3.15.0-0.rc0.git12.1 - Linux v3.14-12380-g9e897e13bd46 - Add queued urgent efi fixes (rhbz 1085349) * Thu Apr 10 2014 Josh Boyer - 3.15.0-0.rc0.git11.1 - Linux v3.14-12376-g4ba85265790b * Thu Apr 10 2014 Josh Boyer - Backported HID RMI driver for Haswell Dell XPS machines from Benjamin Tissoires (rhbz 1048314) * Wed Apr 09 2014 Josh Boyer - 3.15.0-0.rc0.git10.1 - Linux v3.14-12042-g69cd9eba3886 * Wed Apr 09 2014 Josh Boyer - CVE-2014-0155 KVM: BUG caused by invalid guest ioapic redirect table (rhbz 1081589 1085016) * Thu Apr 03 2014 Josh Boyer - 3.15.0-0.rc0.git9.1 - Linux v3.14-7333-g59ecc26004e7 * Thu Apr 03 2014 Josh Boyer - 3.15.0-0.rc0.git8.1 - Linux v3.14-7247-gcd6362befe4c * Wed Apr 02 2014 Josh Boyer - 3.15.0-0.rc0.git7.1 - Linux v3.14-5146-g0f1b1e6d73cb * Wed Apr 02 2014 Josh Boyer - 3.15.0-0.rc0.git6.1 - Linux v3.14-4600-g467cbd207abd * Wed Apr 02 2014 Josh Boyer - 3.15.0-0.rc0.git5.1 - Linux v3.14-4555-gb33ce4429938 * Wed Apr 02 2014 Josh Boyer - 3.15.0-0.rc0.git4.1 - Linux v3.14-4227-g3e75c6de1ac3 * Wed Apr 02 2014 Josh Boyer - 3.15.0-0.rc0.git3.1 - Linux v3.14-3893-gc12e69c6aaf7 * Tue Apr 01 2014 Josh Boyer - 3.15.0-0.rc0.git2.1 - CVE-2014-2678 net: rds: deref of NULL dev in rds_iw_laddr_check (rhbz 1083274 1083280) * Tue Apr 01 2014 Josh Boyer - Linux v3.14-751-g683b6c6f82a6 * Tue Apr 01 2014 Josh Boyer - 3.15.0-0.rc0.git1.1 - Linux v3.14-313-g918d80a13643 - Reenable debugging options. - Turn on SLUB_DEBUG * Mon Mar 31 2014 Alexandre Oliva -libre - GNU Linux-libre 3.14-gnu. * Mon Mar 31 2014 Josh Boyer - 3.14.0-1 - Linux v3.14 - Disable debugging options. * Mon Mar 31 2014 Hans de Goede - Fix clicks getting lost with cypress_ps2 touchpads with recent xorg-x11-drv-synaptics versions (bfdo#76341) * Fri Mar 28 2014 Josh Boyer - 3.14.0-0.rc8.git1.1 - CVE-2014-2580 xen: netback crash trying to disable due to malformed packet (rhbz 1080084 1080086) - CVE-2014-0077 vhost-net: insufficent big packet handling in handle_rx (rhbz 1064440 1081504) - CVE-2014-0055 vhost-net: insufficent error handling in get_rx_bufs (rhbz 1062577 1081503) - CVE-2014-2568 net: potential info leak when ubuf backed skbs are zero copied (rhbz 1079012 1079013) * Fri Mar 28 2014 Josh Boyer - Linux v3.14-rc8-12-g75c5a52 - Reenable debugging options. * Fri Mar 28 2014 Peter Robinson - Enable Tegra 114/124 SoCs - Re-enable OMAP cpufreq - Re-enable CPSW PTP option * Thu Mar 27 2014 Josh Boyer - Switch to CONFIG_TRANSPARENT_HUGEPAGE_MADVISE instead of always on * Tue Mar 25 2014 Josh Boyer - 3.14.0-0.rc8.git0.1 - Linux v3.14-rc8 - Disable debugging options. * Mon Mar 24 2014 Peter Robinson - Update some generic ARM config options - Build in TPS65217 for ARM non lpae kernels (fixes BBW booting) * Fri Mar 21 2014 Josh Boyer - 3.14.0-0.rc7.git2.1 - Linux v3.14-rc7-59-g08edb33 * Wed Mar 19 2014 Josh Boyer - 3.14.0-0.rc7.git1.1 - Linux v3.14-rc7-26-g4907cdc - Reenable debugging options. * Tue Mar 18 2014 Josh Boyer - Enable TEGRA_FBDEV (rhbz 1073960) * Mon Mar 17 2014 Josh Boyer - Add bootwrapper for ppc64le * Mon Mar 17 2014 Josh Boyer - 3.14.0-0.rc7.git0.1 - Linux v3.14-rc7 - Disable debugging options. * Mon Mar 17 2014 Peter Robinson - Build in Palmas regulator on ARM to fix ext MMC boot on OMAP5 * Fri Mar 14 2014 Josh Boyer - 3.14.0-0.rc6.git4.1 - Linux v3.14-rc6-133-gc60f7d5 * Thu Mar 13 2014 Josh Boyer - 3.14.0-0.rc6.git3.1 - Linux v3.14-rc6-41-gac9dc67 * Wed Mar 12 2014 Josh Boyer - 3.14.0-0.rc6.git2.1 - Fix locking issue in iwldvm (rhbz 1046495) - Linux v3.14-rc6-26-g33807f4 * Wed Mar 12 2014 Peter Robinson - Add some general missing ARM drivers (mostly sound) - ARM config tweaks and cleanups - Update i.MX6 dtb * Tue Mar 11 2014 Josh Boyer - 3.14.0-0.rc6.git1.1 - CVE-2014-2309 ipv6: crash due to router advertisment flooding (rhbz 1074471 1075064) - Linux v3.14-rc6-17-g8712a00 - Reenable debugging options. * Mon Mar 10 2014 Josh Boyer - 3.14.0-0.rc6.git0.1 - Linux v3.14-rc6 - Disable debugging options. * Fri Mar 07 2014 Josh Boyer - Revert two xhci fixes that break USB mass storage (rhbz 1073180) * Thu Mar 06 2014 Josh Boyer - Fix stale EC events on Samsung systems (rhbz 1003602) - Add ppc64le support from Brent Baude (rhbz 1073102) - Fix depmod error message from hci_vhci module (rhbz 1051748) - Fix bogus WARN in iwlwifi (rhbz 1071998) * Wed Mar 05 2014 Josh Boyer - 3.14.0-0.rc5.git2.1 - Linux v3.14-rc5-185-gc3bebc7 * Tue Mar 04 2014 Josh Boyer - 3.14.0-0.rc5.git1.1 - Linux v3.14-rc5-43-g0c0bd34 - Reenable debugging options. * Mon Mar 03 2014 Josh Boyer - 3.14.0-0.rc5.git0.1 - Linux v3.14-rc5 - Disable debugging options. * Fri Feb 28 2014 Josh Boyer - 3.14.0-0.rc4.git3.1 - Linux v3.14-rc4-78-gd8efcf3 * Fri Feb 28 2014 Kyle McMartin - Enable appropriate CONFIG_XZ_DEC_$arch options to ensure we can mount squashfs images on supported architectures. * Fri Feb 28 2014 Josh Boyer - CVE-2014-0102 keyctl_link can be used to cause an oops (rhbz 1071396) * Thu Feb 27 2014 Josh Boyer - 3.14.0-0.rc4.git2.1 - Linux v3.14-rc4-45-gd2a0476 * Wed Feb 26 2014 Josh Boyer - 3.14.0-0.rc4.git1.1 - Linux v3.14-rc4-34-g6dba6ec - Reenable debugging options. * Wed Feb 26 2014 Peter Robinson - Re-enable KVM on aarch64 now it builds again * Tue Feb 25 2014 Josh Boyer - Fix mounting issues on cifs (rhbz 1068862) * Mon Feb 24 2014 Josh Boyer - Fix lockdep issue in EHCI when using threaded IRQs (rhbz 1056170) * Mon Feb 24 2014 Josh Boyer - 3.14.0-0.rc4.git0.1 - Linux v3.14-rc4 - Disable debugging options. * Thu Feb 20 2014 Josh Boyer - 3.14.0-0.rc3.git5.1 - Linux v3.14-rc3-219-gd158fc7 * Thu Feb 20 2014 Kyle McMartin - armv7: disable CONFIG_DEBUG_SET_MODULE_RONX until debugged (rhbz#1067113) * Thu Feb 20 2014 Josh Boyer - 3.14.0-0.rc3.git4.1 - Linux v3.14-rc3-184-ge95003c * Wed Feb 19 2014 Josh Boyer - 3.14.0-0.rc3.git3.1 - Linux v3.14-rc3-168-g960dfc4 * Tue Feb 18 2014 Josh Boyer - 3.14.0-0.rc3.git2.1 - Linux v3.14-rc3-43-g805937c * Tue Feb 18 2014 Josh Boyer - 3.14.0-0.rc3.git1.1 - Linux v3.14-rc3-20-g60f76ea - Reenable debugging options. - Fix r8169 ethernet after suspend (rhbz 1054408) - Enable INTEL_MIC drivers (rhbz 1064086) * Mon Feb 17 2014 Josh Boyer - 3.14.0-0.rc3.git0.1 - Linux v3.14-rc3 - Disable debugging options. - Enable CONFIG_PPC_DENORMALIZATION (from Tony Breeds) * Fri Feb 14 2014 Josh Boyer - 3.14.0-0.rc2.git4.1 - Linux v3.14-rc2-342-g5e57dc8 - CVE-2014-0069 cifs: incorrect handling of bogus user pointers (rhbz 1064253 1062578) * Thu Feb 13 2014 Josh Boyer - 3.14.0-0.rc2.git3.1 - Linux v3.14-rc2-271-g4675348 * Wed Feb 12 2014 Josh Boyer - 3.14.0-0.rc2.git2.1 - Linux v3.14-rc2-267-g9398a10 * Wed Feb 12 2014 Josh Boyer - Fix cgroup destroy oops (rhbz 1045755) - Fix backtrace in amd_e400_idle (rhbz 1031296) * Tue Feb 11 2014 Josh Boyer - 3.14.0-0.rc2.git1.1 - Linux v3.14-rc2-26-g6792dfe - Reenable debugging options. * Mon Feb 10 2014 Josh Boyer - 3.14.0-0.rc2.git0.1 - Linux v3.14-rc2 - Disable debugging options. * Sun Feb 9 2014 Peter Robinson - Enable CMA on aarch64 - Disable KVM temporarily on aarch64 - Minor ARM config updates and cleanups * Sun Feb 09 2014 Josh Boyer - 3.14.0-0.rc1.git5.1.1 - Linux v3.14-rc1-182-g4944790 * Sat Feb 08 2014 Josh Boyer - 3.14.0-0.rc1.git4.1 - Linux v3.14-rc1-150-g34a9bff * Fri Feb 07 2014 Josh Boyer - 3.14.0-0.rc1.git3.1 - Linux v3.14-rc1-86-g9343224 * Thu Feb 06 2014 Josh Boyer - 3.14.0-0.rc1.git2.1 - Linux v3.14-rc1-54-gef42c58 * Wed Feb 05 2014 Josh Boyer - 3.14.0-0.rc1.git1.1 - Linux v3.14-rc1-13-g878a876 * Tue Feb 04 2014 Kyle McMartin - Fix %all_arch_configs on aarch64. * Tue Feb 04 2014 Josh Boyer - 3.14.0-0.rc1.git0.2 - Add NUMA oops patches - Reenable debugging options. * Mon Feb 03 2014 Josh Boyer - 3.14.0-0.rc1.git0.1 - Linux v3.14-rc1 - Disable debugging options. - Disable Xen on ARM temporarily as it doesn't build * Mon Feb 3 2014 Peter Robinson - Re-enable modular Tegra DRM driver - Add SD driver for ZYNQ SoCs * Fri Jan 31 2014 Josh Boyer - 3.14.0-0.rc0.git19.1 - Linux v3.13-10637-ge7651b8 - Enable ZRAM/ZSMALLOC (rhbz 1058072) - Turn EXYNOS_HDMI back on now that it should build * Thu Jan 30 2014 Josh Boyer - 3.14.0-0.rc0.git18.1 - Linux v3.13-10231-g53d8ab2 * Thu Jan 30 2014 Josh Boyer - 3.14.0-0.rc0.git17.1 - Linux v3.13-10094-g9b0cd30 - Add patches to fix imx-hdmi build, and fix kernfs lockdep oops (rhbz 1055105) * Thu Jan 30 2014 Josh Boyer - 3.14.0-0.rc0.git16.1 - Linux v3.13-9240-g1329311 * Wed Jan 29 2014 Josh Boyer - 3.14.0-0.rc0.git15.1 - Linux v3.13-9218-g0e47c96 * Tue Jan 28 2014 Josh Boyer - 3.14.0-0.rc0.git14.1 - Linux v3.13-8905-g627f4b3 * Tue Jan 28 2014 Josh Boyer - 3.14.0-0.rc0.git13.1 - Linux v3.13-8789-g54c0a4b - Enable CONFIG_CC_STACKPROTECTOR_STRONG on x86 * Mon Jan 27 2014 Peter Robinson - Build AllWinner (sunxi) on LPAE too (Cortex-A7 supports LPAE/KVM) * Mon Jan 27 2014 Josh Boyer - 3.14.0-0.rc0.git12.1 - Linux v3.13-8631-gba635f8 * Mon Jan 27 2014 Josh Boyer - 3.14.0-0.rc0.git11.1 - Linux v3.13-8598-g77d143d * Sat Jan 25 2014 Josh Boyer - 3.14.0-0.rc0.git10.1 - Linux v3.13-8330-g4ba9920 * Sat Jan 25 2014 Josh Boyer - 3.14.0-0.rc0.git9.1 - Linux v3.13-6058-g2d08cd0 - Quiet incorrect usb phy error (rhbz 1057529) * Sat Jan 25 2014 Ville Skyttä - Own the /lib/modules dir. * Sat Jan 25 2014 Peter Robinson - Initial ARM config updates for 3.14 - Disable highbank cpuidle driver - Enable mtd-nand drivers on ARM - Update CPU thermal scaling options for ARM * Fri Jan 24 2014 Josh Boyer - 3.14.0-0.rc0.git8.1 - Linux v3.13-5617-g3aacd62 * Thu Jan 23 2014 Josh Boyer - 3.14.0-0.rc0.git7.1 - Linux v3.13-4156-g90804ed * Thu Jan 23 2014 Josh Boyer - 3.14.0-0.rc0.git6.1.1 - Revert fsnotify changes as they cause slab corruption for multiple people - Linux v3.13-3995-g0dc3fd0 * Thu Jan 23 2014 Josh Boyer - 3.14.0-0.rc0.git5.1 - Linux v3.13-3667-ge1ba845 * Wed Jan 22 2014 Josh Boyer - 3.14.0-0.rc0.git4.1 - Linux v3.13-3477-gdf32e43 * Wed Jan 22 2014 Josh Boyer - 3.14.0-0.rc0.git3.1 - Linux v3.13-3260-g03d11a0 * Wed Jan 22 2014 Josh Boyer - 3.14.0-0.rc0.git2.1 - Linux v3.13-2502-gec513b1 * Tue Jan 21 2014 Josh Boyer - 3.14.0-0.rc0.git1.1 - Linux v3.13-737-g7fe67a1 - Reenable debugging options. Enable SLUB_DEBUG * Mon Jan 20 2014 Kyle McMartin - Enable CONFIG_KVM on AArch64. * Mon Jan 20 2014 Alexandre Oliva -libre Tue Jan 21 - GNU Linux-libre 3.13-gnu. * Mon Jan 20 2014 Josh Boyer - 3.13.0-1 - Linux v3.13 - Disable debugging options. - Use versioned perf man pages tarball ### # The following Emacs magic makes C-c C-e use UTC dates. # Local Variables: # rpm-change-log-uses-utc: t # End: ###