diff options
Diffstat (limited to 'freed-ora/current/f15/kernel.spec')
| -rw-r--r-- | freed-ora/current/f15/kernel.spec | 2799 |
1 files changed, 2799 insertions, 0 deletions
diff --git a/freed-ora/current/f15/kernel.spec b/freed-ora/current/f15/kernel.spec new file mode 100644 index 000000000..36931c97a --- /dev/null +++ b/freed-ora/current/f15/kernel.spec @@ -0,0 +1,2799 @@ +# We have to override the new %%install behavior because, well... the kernel is special. +%global __spec_install_pre %{___build_pre} + +Summary: The Linux kernel + +# For a stable, released kernel, released_kernel should be 1. For rawhide +# and/or a kernel built from an rc or git snapshot, released_kernel should +# be 0. +%global released_kernel 1 + +# Save original buildid for later if it's defined +%if 0%{?buildid:1} +%global orig_buildid %{buildid} +%undefine buildid +%endif + +################################################################### +# Polite request for people who spin their own kernel rpms: +# please modify the "buildid" define in a way that identifies +# that the kernel isn't the stock distribution kernel, for example, +# by setting the define to ".local" or ".bz123456". This will be +# appended to the full kernel version. +# +# (Uncomment the '#' and both spaces below to set the buildid.) +# +# % define buildid .local +################################################################### + +# The buildid can also be specified on the rpmbuild command line +# by adding --define="buildid .whatever". If both the specfile and +# the environment define a buildid they will be concatenated together. +%if 0%{?orig_buildid:1} +%if 0%{?buildid:1} +%global srpm_buildid %{buildid} +%define buildid %{srpm_buildid}%{orig_buildid} +%else +%define buildid %{orig_buildid} +%endif +%endif + +# baserelease defines which build revision of this kernel version we're +# building. We used to call this fedora_build, but the magical name +# baserelease is matched by the rpmdev-bumpspec tool, which you should use. +# +# We used to have some extra magic weirdness to bump this automatically, +# but now we don't. Just use: rpmdev-bumpspec -c 'comment for changelog' +# When changing base_sublevel below or going from rc to a final kernel, +# reset this by hand to 1 (or to 0 and then use rpmdev-bumpspec). +# scripts/rebase.sh should be made to do that for you, actually. +# +# For non-released -rc kernels, this will be prepended with "0.", so +# for example a 3 here will become 0.3 +# +%global baserelease 1 +%global fedora_build %{baserelease} + +# base_sublevel is the kernel version we're starting with and patching +# on top of -- for example, 2.6.22-rc7-git1 starts with a 2.6.21 base, +# which yields a base_sublevel of 21. +%define base_sublevel 37 + +# librev starts empty, then 1, etc, as the linux-libre tarball +# changes. This is only used to determine which tarball to use. +#define librev + +# To be inserted between "patch" and "-2.6.". +#define stablelibre -libre +#define rcrevlibre -libre +#define gitrevlibre -libre + +# libres (s for suffix) may be bumped for rebuilds in which patches +# change but fedora_build doesn't. Make sure it starts with a dot. +# It is appended after dist. +#define libres . + +## If this is a released kernel ## +%if 0%{?released_kernel} + +# Do we have a -stable update to apply? +%define stable_update 0 +# Is it a -stable RC? +%define stable_rc 0 +# Set rpm version accordingly +%if 0%{?stable_update} +%define stablerev .%{stable_update} +%define stable_base %{stable_update} +%if 0%{?stable_rc} +# stable RCs are incremental patches, so we need the previous stable patch +%define stable_base %(echo $((%{stable_update} - 1))) +%endif +%endif +%define rpmversion 2.6.%{base_sublevel}%{?stablerev} + +## The not-released-kernel case ## +%else +# The next upstream release sublevel (base_sublevel+1) +%define upstream_sublevel %(echo $((%{base_sublevel} + 1))) +# The rc snapshot level +%define rcrev 0 +# The git snapshot level +%define gitrev 0 +# Set rpm version accordingly +%define rpmversion 2.6.%{upstream_sublevel} +%endif +# Nb: The above rcrev and gitrev values automagically define Patch00 and Patch01 below. + +# What parts do we want to build? We must build at least one kernel. +# These are the kernels that are built IF the architecture allows it. +# All should default to 1 (enabled) and be flipped to 0 (disabled) +# by later arch-specific checks. + +# The following build options are enabled by default. +# Use either --without <opt> in your rpmbuild command or force values +# to 0 in here to disable them. +# +# standard kernel +%define with_up %{?_without_up: 0} %{?!_without_up: 1} +# kernel-smp (only valid for ppc 32-bit) +%define with_smp %{?_without_smp: 0} %{?!_without_smp: 1} +# kernel-debug +%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1} +# kernel-doc +%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1} +# kernel-headers +%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1} +# kernel-firmware +%define with_firmware %{?_with_firmware: 1} %{?!_with_firmware: 0} +# tools/perf +%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1} +# kernel-debuginfo +%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1} +# kernel-bootwrapper (for creating zImages from kernel + initrd) +%define with_bootwrapper %{?_without_bootwrapper: 0} %{?!_without_bootwrapper: 1} +# Want to build a the vsdo directories installed +%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1} + +# Build the kernel-doc package, but don't fail the build if it botches. +# Here "true" means "continue" and "false" means "fail the build". +%if 0%{?released_kernel} +%define doc_build_fail false +%else +%define doc_build_fail true +%endif + +%define rawhide_skip_docs 0 +%if 0%{?rawhide_skip_docs} +%define with_doc 0 +%define doc_build_fail true +%endif + +# Additional options for user-friendly one-off kernel building: +# +# Only build the base kernel (--with baseonly): +%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0} +# Only build the smp kernel (--with smponly): +%define with_smponly %{?_with_smponly: 1} %{?!_with_smponly: 0} +# Only build the debug kernel (--with dbgonly): +%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0} + +# should we do C=1 builds with sparse +%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0} + +# Set debugbuildsenabled to 1 for production (build separate debug kernels) +# and 0 for rawhide (all kernels are debug kernels). +# See also 'make debug' and 'make release'. +%define debugbuildsenabled 1 + +# Want to build a vanilla kernel build without any non-upstream patches? +%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0} + +# pkg_release is what we'll fill in for the rpm Release: field +%if 0%{?released_kernel} + +%if 0%{?stable_rc} +%define stable_rctag .rc%{stable_rc} +%endif +%define pkg_release %{fedora_build}%{?stable_rctag}%{?buildid}%{?dist}%{?libres} + +%else + +# non-released_kernel +%if 0%{?rcrev} +%define rctag .rc%rcrev +%else +%define rctag .rc0 +%endif +%if 0%{?gitrev} +%define gittag .git%gitrev +%else +%define gittag .git0 +%endif +%define pkg_release 0%{?rctag}%{?gittag}.%{fedora_build}%{?buildid}%{?dist}%{?libres} + +%endif + +# The kernel tarball/base version +%define kversion 2.6.%{base_sublevel} + +%define make_target bzImage + +%define KVERREL %{version}-libre.%{release}.%{_target_cpu} +%define hdrarch %_target_cpu +%define asmarch %_target_cpu + +%if 0%{!?nopatches:1} +%define nopatches 0 +%endif + +%if %{with_vanilla} +%define nopatches 1 +%endif + +%if %{nopatches} +%define with_bootwrapper 0 +%define variant -vanilla +%else +%define variant -libre +%define variant_fedora -libre-fedora +%endif + +%define using_upstream_branch 0 +%if 0%{?upstream_branch:1} +%define stable_update 0 +%define using_upstream_branch 1 +%define variant -%{upstream_branch}%{?variant_fedora} +%define pkg_release 0.%{fedora_build}%{upstream_branch_tag}%{?buildid}%{?dist}%{?libres} +%endif + +%if !%{debugbuildsenabled} +%define with_debug 0 +%endif + +%if !%{with_debuginfo} +%define _enable_debug_packages 0 +%endif +%define debuginfodir /usr/lib/debug + +# kernel-PAE is only built on i686. +%ifarch i686 +%define with_pae 1 +%else +%define with_pae 0 +%endif + +# if requested, only build base kernel +%if %{with_baseonly} +%define with_smp 0 +%define with_debug 0 +%endif + +# if requested, only build smp kernel +%if %{with_smponly} +%define with_up 0 +%define with_debug 0 +%endif + +# if requested, only build debug kernel +%if %{with_dbgonly} +%if %{debugbuildsenabled} +%define with_up 0 +%endif +%define with_smp 0 +%define with_pae 0 +%define with_perf 0 +%endif + +%define all_x86 i386 i686 + +%if %{with_vdso_install} +# These arches install vdso/ directories. +%define vdso_arches %{all_x86} x86_64 ppc ppc64 +%endif + +# Overrides for generic default options + +# only ppc and alphav56 need separate smp kernels +%ifnarch ppc alphaev56 +%define with_smp 0 +%endif + +# don't do debug builds on anything but i686 and x86_64 +%ifnarch i686 x86_64 +%define with_debug 0 +%endif + +# only package docs noarch +%ifnarch noarch +%define with_doc 0 +%endif + +# don't build noarch kernels or headers (duh) +%ifarch noarch +%define with_up 0 +%define with_headers 0 +%define with_perf 0 +%define all_arch_configs kernel-%{version}-*.config +%define with_firmware %{?_without_firmware: 0} %{?!_without_firmware: 1} +%endif + +# bootwrapper is only on ppc +%ifnarch ppc ppc64 +%define with_bootwrapper 0 +%endif + +# sparse blows up on ppc64 alpha and sparc64 +%ifarch ppc64 ppc alpha sparc64 +%define with_sparse 0 +%endif + +# Per-arch tweaks + +%ifarch %{all_x86} +%define asmarch x86 +%define hdrarch i386 +%define all_arch_configs kernel-%{version}-i?86*.config +%define image_install_path boot +%define kernel_image arch/x86/boot/bzImage +%endif + +%ifarch x86_64 +%define asmarch x86 +%define all_arch_configs kernel-%{version}-x86_64*.config +%define image_install_path boot +%define kernel_image arch/x86/boot/bzImage +%endif + +%ifarch ppc64 +%define asmarch powerpc +%define hdrarch powerpc +%define all_arch_configs kernel-%{version}-ppc64*.config +%define image_install_path boot +%define make_target vmlinux +%define kernel_image vmlinux +%define kernel_image_elf 1 +%endif + +%ifarch s390x +%define asmarch s390 +%define hdrarch s390 +%define all_arch_configs kernel-%{version}-s390x.config +%define image_install_path boot +%define make_target image +%define kernel_image arch/s390/boot/image +%define with_perf 0 +%endif + +%ifarch sparc64 +%define asmarch sparc +%define all_arch_configs kernel-%{version}-sparc64*.config +%define make_target image +%define kernel_image arch/sparc/boot/image +%define image_install_path boot +%define with_perf 0 +%endif + +%ifarch ppc +%define asmarch powerpc +%define hdrarch powerpc +%define all_arch_configs kernel-%{version}-ppc{-,.}*config +%define image_install_path boot +%define make_target vmlinux +%define kernel_image vmlinux +%define kernel_image_elf 1 +%endif + +%ifarch ia64 +%define all_arch_configs kernel-%{version}-ia64*.config +%define image_install_path boot/efi/EFI/redhat +%define make_target compressed +%define kernel_image vmlinux.gz +%endif + +%ifarch alpha alphaev56 +%define all_arch_configs kernel-%{version}-alpha*.config +%define image_install_path boot +%define make_target vmlinux +%define kernel_image vmlinux +%endif + +%ifarch %{arm} +%define all_arch_configs kernel-%{version}-arm*.config +%define image_install_path boot +%define hdrarch arm +%define make_target vmlinux +%define kernel_image vmlinux +%endif + +%if %{nopatches} +# XXX temporary until last vdso patches are upstream +%define vdso_arches ppc ppc64 +%endif + +# Should make listnewconfig fail if there's config options +# printed out? +%if %{nopatches}%{using_upstream_branch} +%define listnewconfig_fail 0 +%else +%define listnewconfig_fail 1 +%endif + +# To temporarily exclude an architecture from being built, add it to +# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we +# don't build kernel-headers then the new build system will no longer let +# us use the previous build of that package -- it'll just be completely AWOL. +# Which is a BadThing(tm). + +# We only build kernel-headers on the following... +%define nobuildarches i386 s390 sparc %{arm} + +%ifarch %nobuildarches +%define with_up 0 +%define with_smp 0 +%define with_pae 0 +%define with_debuginfo 0 +%define with_perf 0 +%define _enable_debug_packages 0 +%endif + +%define with_pae_debug 0 +%if %{with_pae} +%define with_pae_debug %{with_debug} +%endif + +# +# Three sets of minimum package version requirements in the form of Conflicts: +# to versions below the minimum +# + +# +# First the general kernel 2.6 required versions as per +# Documentation/Changes +# +%define kernel_dot_org_conflicts ppp < 2.4.3-3, isdn4k-utils < 3.2-32, nfs-utils < 1.0.7-12, e2fsprogs < 1.37-4, util-linux < 2.12, jfsutils < 1.1.7-2, reiserfs-utils < 3.6.19-2, xfsprogs < 2.6.13-4, procps < 3.2.5-6.3, oprofile < 0.9.1-2 + +# +# Then a series of requirements that are distribution specific, either +# because we add patches for something, or the older versions have +# problems with the newer kernel or lack certain things that make +# integration in the distro harder than needed. +# +%define package_conflicts initscripts < 7.23, udev < 063-6, iptables < 1.3.2-1, ipw2200-firmware < 2.4, iwl4965-firmware < 228.57.2, selinux-policy-targeted < 1.25.3-14, squashfs-tools < 4.0, wireless-tools < 29-3 + +# We moved the drm include files into kernel-headers, make sure there's +# a recent enough libdrm-devel on the system that doesn't have those. +%define kernel_headers_conflicts libdrm-devel < 2.4.0-0.15 + +# +# Packages that need to be installed before the kernel is, because the %%post +# scripts use them. +# +%define kernel_prereq fileutils, module-init-tools, initscripts >= 8.11.1-1, grubby >= 7.0.10-1 +%define initrd_prereq dracut >= 001-7 + +# +# This macro does requires, provides, conflicts, obsoletes for a kernel package. +# %%kernel_reqprovconf <subpackage> +# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes +# macros defined above. +# +%define kernel_reqprovconf \ +Provides: kernel = %{rpmversion}-%{pkg_release}\ +Provides: kernel-libre = %{rpmversion}-%{pkg_release}\ +Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:.%{1}}\ +Provides: kernel-libre-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:.%{1}}\ +Provides: kernel-drm = 4.3.0\ +Provides: kernel-drm-nouveau = 16\ +Provides: kernel-modeset = 1\ +Provides: kernel-uname-r = %{KVERREL}%{?1:.%{1}}\ +Provides: kernel-libre-uname-r = %{KVERREL}%{?1:.%{1}}\ +Requires(pre): %{kernel_prereq}\ +Requires(pre): %{initrd_prereq}\ +%if %{with_firmware}\ +Requires(pre): kernel-libre-firmware >= %{rpmversion}-%{pkg_release}\ +%endif\ +Requires(post): /sbin/new-kernel-pkg\ +Requires(preun): /sbin/new-kernel-pkg\ +Conflicts: %{kernel_dot_org_conflicts}\ +Conflicts: %{package_conflicts}\ +%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\ +%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\ +%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\ +# We can't let RPM do the dependencies automatic because it'll then pick up\ +# a correct but undesirable perl dependency from the module headers which\ +# isn't required for the kernel proper to function\ +AutoReq: no\ +AutoProv: yes\ +%{nil} + +Name: kernel%{?variant} +Group: System Environment/Kernel +License: GPLv2 +URL: http://linux-libre.fsfla.org/ +Version: %{rpmversion} +Release: %{pkg_release} +# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD. +# SET %%nobuildarches (ABOVE) INSTEAD +ExclusiveArch: noarch %{all_x86} x86_64 ppc ppc64 ia64 sparc sparc64 s390 s390x alpha alphaev56 %{arm} +ExclusiveOS: Linux + +%kernel_reqprovconf + +# +# List the packages used during the kernel build +# +BuildRequires: module-init-tools, patch >= 2.5.4, bash >= 2.03, sh-utils, tar +BuildRequires: bzip2, findutils, gzip, m4, perl, make >= 3.78, diffutils, gawk +BuildRequires: gcc >= 3.4.2, binutils >= 2.12, redhat-rpm-config +BuildRequires: net-tools +BuildRequires: xmlto, asciidoc +%if %{with_sparse} +BuildRequires: sparse >= 0.4.1 +%endif +%if %{with_perf} +BuildRequires: elfutils-devel zlib-devel binutils-devel newt-devel python-devel perl(ExtUtils::Embed) +%endif +BuildConflicts: rhbuildsys(DiskFree) < 500Mb + +%define fancy_debuginfo 0 +%if %{with_debuginfo} +%if 0%{?fedora} >= 8 || 0%{?rhel} >= 6 +%define fancy_debuginfo 1 +%endif +%endif + +%if %{fancy_debuginfo} +# Fancy new debuginfo generation introduced in Fedora 8. +BuildRequires: rpm-build >= 4.4.2.1-4 +%define debuginfo_args --strict-build-id +%endif + +Source0: http://linux-libre.fsfla.org/pub/linux-libre/freed-ora/src/linux-%{kversion}-libre%{?librev}.tar.bz2 + +# For documentation purposes only. +Source3: deblob-main +Source4: deblob-%{kversion} +Source5: deblob-check + +Source11: genkey +Source14: find-provides +Source15: merge.pl + +Source20: Makefile.config +Source21: config-debug +Source22: config-nodebug +Source23: config-generic +Source24: config-rhel-generic + +Source30: config-x86-generic +Source31: config-i686-PAE + +Source40: config-x86_64-generic + +Source50: config-powerpc-generic +Source51: config-powerpc32-generic +Source52: config-powerpc32-smp +Source53: config-powerpc64 + +Source60: config-ia64-generic + +Source70: config-s390x + +Source90: config-sparc64-generic + +Source100: config-arm + +# Here should be only the patches up to the upstream canonical Linus tree. + +# For a stable release kernel +%if 0%{?stable_update} +%if 0%{?stable_base} +%define stable_patch_00 patch%{?stablelibre}-2.6.%{base_sublevel}.%{stable_base}.bz2 +Patch00: %{stable_patch_00} +%endif +%if 0%{?stable_rc} +%define stable_patch_01 patch%{?rcrevlibre}-2.6.%{base_sublevel}.%{stable_update}-rc%{stable_rc}.bz2 +Patch01: %{stable_patch_01} +%endif + +# non-released_kernel case +# These are automagically defined by the rcrev and gitrev values set up +# near the top of this spec file. +%else +%if 0%{?rcrev} +Patch00: patch%{?rcrevlibre}-2.6.%{upstream_sublevel}-rc%{rcrev}.bz2 +%if 0%{?gitrev} +Patch01: patch%{?gitrevlibre}-2.6.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.bz2 +%endif +%else +# pre-{base_sublevel+1}-rc1 case +%if 0%{?gitrev} +Patch00: patch%{?gitrevlibre}-2.6.%{base_sublevel}-git%{gitrev}.bz2 +%endif +%endif +%endif + +%if %{using_upstream_branch} +### BRANCH PATCH ### +%endif + +Patch02: git-linus.diff + +# we also need compile fixes for -vanilla +Patch04: linux-2.6-compile-fixes.patch + +# build tweak for build ID magic, even for -vanilla +Patch05: linux-2.6-makefile-after_link.patch + +Patch07: freedo.patch + +%if !%{nopatches} + + +# revert upstream patches we get via other methods +Patch09: linux-2.6-upstream-reverts.patch +# Git trees. + +# Standalone patches +Patch20: linux-2.6-hotfixes.patch + + +Patch30: linux-2.6-tracehook.patch +Patch31: linux-2.6-utrace.patch +Patch32: linux-2.6-utrace-ptrace.patch + +Patch150: linux-2.6.29-sparc-IOC_TYPECHECK.patch + +Patch160: linux-2.6-32bit-mmap-exec-randomization.patch +Patch161: linux-2.6-i386-nx-emulation.patch + +Patch200: linux-2.6-debug-sizeof-structs.patch +Patch201: linux-2.6-debug-nmi-timeout.patch +Patch202: linux-2.6-debug-taint-vm.patch +Patch203: linux-2.6-debug-vm-would-have-oomkilled.patch +Patch204: linux-2.6-debug-always-inline-kzalloc.patch + +Patch380: linux-2.6-defaults-pci_no_msi.patch +Patch381: linux-2.6-defaults-pci_use_crs.patch +Patch383: linux-2.6-defaults-aspm.patch +Patch384: pci-disable-aspm-if-bios-asks-us-to.patch +Patch386: pci-_osc-supported-field-should-contain-supported-features-not-enabled-ones.patch + +Patch385: ima-allow-it-to-be-completely-disabled-and-default-off.patch + +Patch390: linux-2.6-defaults-acpi-video.patch +Patch391: linux-2.6-acpi-video-dos.patch +Patch393: acpi-ec-add-delay-before-write.patch +Patch394: linux-2.6-acpi-debug-infinite-loop.patch +Patch395: acpi-update-battery-information-on-notification-0x81.patch + +Patch450: linux-2.6-input-kill-stupid-messages.patch +Patch452: linux-2.6.30-no-pcspkr-modalias.patch +Patch454: thinkpad-acpi-fix-backlight.patch + +Patch460: linux-2.6-serial-460800.patch + +Patch470: die-floppy-die.patch + +Patch510: linux-2.6-silence-noise.patch +Patch530: linux-2.6-silence-fbcon-logo.patch +Patch570: linux-2.6-selinux-mprotect-checks.patch +Patch580: linux-2.6-sparc-selinux-mprotect-checks.patch + +Patch610: hda_intel-prealloc-4mb-dmabuffer.patch + +Patch700: linux-2.6-e1000-ich9-montevina.patch + +Patch800: linux-2.6-crash-driver.patch + +# crypto/ + +# virt + ksm patches +Patch1555: fix_xen_guest_on_old_EC2.patch + +# DRM + +# nouveau + drm fixes +Patch1810: drm-nouveau-updates.patch +Patch1819: drm-intel-big-hammer.patch +# intel drm is all merged upstream +Patch1824: drm-intel-next.patch +# make sure the lvds comes back on lid open +Patch1825: drm-intel-make-lvds-work.patch +Patch1826: drm-intel-edp-fixes.patch + +Patch1900: linux-2.6-intel-iommu-igfx.patch + +# linux1394 git patches +Patch2200: linux-2.6-firewire-git-update.patch +Patch2201: linux-2.6-firewire-git-pending.patch + +# Quiet boot fixes +# silence the ACPI blacklist code +Patch2802: linux-2.6-silence-acpi-blacklist.patch + +# media patches +Patch2899: linux-2.6-v4l-dvb-fixes.patch +Patch2900: linux-2.6-v4l-dvb-update.patch +Patch2901: linux-2.6-v4l-dvb-experimental.patch +Patch2902: linux-2.6-v4l-dvb-uvcvideo-update.patch + +Patch2910: linux-2.6-v4l-dvb-add-lgdt3304-support.patch +Patch2912: linux-2.6-v4l-dvb-ir-core-update.patch + +#Patch2916: lirc-staging-2.6.36-fixes.patch +Patch2917: hdpvr-ir-enable.patch + +Patch2918: flexcop-fix-xlate_proc_name-warning.patch + +# fs fixes + +# NFSv4 + +# patches headed upstream + +Patch12010: add-appleir-usb-driver.patch + +Patch12016: disable-i8042-check-on-apple-mac.patch + +Patch12017: prevent-runtime-conntrack-changes.patch + +Patch12018: neuter_intel_microcode_load.patch + +Patch12030: tpm-fix-stall-on-boot.patch + +Patch12100: applesmc_update.patch +Patch12101: apple_backlight.patch +Patch12102: efifb_update.patch +Patch12103: linux-next-macbook-air-input.patch +Patch12200: acpi_reboot.patch +Patch12210: efi_default_physical.patch + +# Runtime power management +Patch12203: linux-2.6-usb-pci-autosuspend.patch +Patch12204: linux-2.6-enable-more-pci-autosuspend.patch +Patch12205: runtime_pm_fixups.patch + +Patch12303: dmar-disable-when-ricoh-multifunction.patch + +Patch12401: debug-tty-print-dev-name.patch + +Patch12410: mm-page-allocator-adjust-the-per-cpu-counter-threshold-when-memory-is-low.patch +Patch12411: mm-vmstat-use-a-single-setter-function-and-callback-for-adjusting-percpu-thresholds.patch + +Patch12421: fs-call-security_d_instantiate-in-d_obtain_alias.patch + +Patch12422: net-AF_PACKET-vmalloc.patch + +%endif + +BuildRoot: %{_tmppath}/kernel-%{KVERREL}-root + +%description +The kernel package contains the Linux kernel (vmlinuz), the core of any +GNU/Linux operating system. The kernel handles the basic functions +of the operating system: memory allocation, process allocation, device +input and output, etc. + +The kernel-libre package is the upstream kernel without the non-Free +blobs it includes by default. + +%package doc +Summary: Various documentation bits found in the kernel source +Group: Documentation +Provides: kernel-doc = %{rpmversion}-%{pkg_release} +%description doc +This package contains documentation files from the kernel +source. Various bits of information about the Linux kernel and the +device drivers shipped with it are documented in these files. + +You'll want to install this package if you need a reference to the +options that can be passed to Linux kernel modules at load time. + + +%package headers +Summary: Header files for the Linux kernel for use by glibc +Group: Development/System +Obsoletes: glibc-kernheaders < 3.0-46 +Provides: glibc-kernheaders = 3.0-46 +Provides: kernel-headers = %{rpmversion}-%{pkg_release} +%description headers +Kernel-headers includes the C header files that specify the interface +between the Linux kernel and userspace libraries and programs. The +header files define structures and constants that are needed for +building most standard programs and are also needed for rebuilding the +glibc package. + +%package firmware +Summary: Firmware files used by the Linux kernel +Group: Development/System +License: GPLv2+ +Provides: kernel-firmware = %{rpmversion}-%{pkg_release} +%description firmware +Kernel-firmware includes firmware files required for some devices to +operate. + +%package bootwrapper +Summary: Boot wrapper files for generating combined kernel + initrd images +Group: Development/System +Requires: gzip +%description bootwrapper +Kernel-bootwrapper contains the wrapper code which makes bootable "zImage" +files combining both kernel and initial ramdisk. + +%package debuginfo-common-%{_target_cpu} +Summary: Kernel source files used by %{name}-debuginfo packages +Group: Development/Debug +%description debuginfo-common-%{_target_cpu} +This package is required by %{name}-debuginfo subpackages. +It provides the kernel source files common to all builds. + +%if %{with_perf} +%package -n perf-libre +Provides: perf = %{rpmversion}-%{pkg_release} +Summary: Performance monitoring for the Linux kernel +Group: Development/System +License: GPLv2 +%description -n perf-libre +This package provides the perf tool and the supporting documentation. +%endif + + +# +# This macro creates a kernel-<subpackage>-debuginfo package. +# %%kernel_debuginfo_package <subpackage> +# +%define kernel_debuginfo_package() \ +%package %{?1:%{1}-}debuginfo\ +Summary: Debug information for package %{name}%{?1:-%{1}}\ +Group: Development/Debug\ +Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\ +Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\ +AutoReqProv: no\ +%description -n %{name}%{?1:-%{1}}-debuginfo\ +This package provides debug information for package %{name}%{?1:-%{1}}.\ +This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\ +%{expand:%%global debuginfo_args %{?debuginfo_args} -p '/.*/%%{KVERREL}%{?1:\.%{1}}/.*|/.*%%{KVERREL}%{?1:\.%{1}}(\.debug)?' -o debuginfo%{?1}.list}\ +%{nil} + +# +# This macro creates a kernel-<subpackage>-devel package. +# %%kernel_devel_package <subpackage> <pretty-name> +# +%define kernel_devel_package() \ +%package %{?1:%{1}-}devel\ +Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\ +Group: System Environment/Kernel\ +Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\ +Provides: kernel-libre%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\ +Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:.%{1}}\ +Provides: kernel-libre-devel-%{_target_cpu} = %{version}-%{release}%{?1:.%{1}}\ +Provides: kernel-devel = %{version}-%{release}%{?1:.%{1}}\ +Provides: kernel-libre-devel = %{version}-%{release}%{?1:.%{1}}\ +Provides: kernel-devel-uname-r = %{KVERREL}%{?1:.%{1}}\ +Provides: kernel-libre-devel-uname-r = %{KVERREL}%{?1:.%{1}}\ +AutoReqProv: no\ +Requires(pre): /usr/bin/find\ +Requires: perl\ +%description -n kernel%{?variant}%{?1:-%{1}}-devel\ +This package provides kernel headers and makefiles sufficient to build modules\ +against the %{?2:%{2} }kernel package.\ +%{nil} + +# +# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too. +# %%define variant_summary The Linux kernel compiled for <configuration> +# %%kernel_variant_package [-n <pretty-name>] <subpackage> +# +%define kernel_variant_package(n:) \ +%package %1\ +Summary: %{variant_summary}\ +Group: System Environment/Kernel\ +%kernel_reqprovconf\ +%{expand:%%kernel_devel_package %1 %{!?-n:%1}%{?-n:%{-n*}}}\ +%{expand:%%kernel_debuginfo_package %1}\ +%{nil} + + +# First the auxiliary packages of the main kernel package. +%kernel_devel_package +%kernel_debuginfo_package + + +# Now, each variant package. + +%define variant_summary The Linux kernel compiled for SMP machines +%kernel_variant_package -n SMP smp +%description smp +This package includes a SMP version of the Linux kernel. It is +required only on machines with two or more CPUs as well as machines with +hyperthreading technology. + +The kernel-libre-smp package is the upstream kernel without the +non-Free blobs it includes by default. + +Install the kernel-libre-smp package if your machine uses two or more +CPUs. + + +%define variant_summary The Linux kernel compiled for PAE capable machines +%kernel_variant_package PAE +%description PAE +This package includes a version of the Linux kernel with support for up to +64GB of high memory. It requires a CPU with Physical Address Extensions (PAE). +The non-PAE kernel can only address up to 4GB of memory. +Install the kernel-PAE package if your machine has more than 4GB of memory. + +The kernel-libre-PAE package is the upstream kernel without the +non-Free blobs it includes by default. + + + +%define variant_summary The Linux kernel compiled with extra debugging enabled for PAE capable machines +%kernel_variant_package PAEdebug +Obsoletes: kernel-PAE-debug +%description PAEdebug +This package includes a version of the Linux kernel with support for up to +64GB of high memory. It requires a CPU with Physical Address Extensions (PAE). +The non-PAE kernel can only address up to 4GB of memory. +Install the kernel-PAE package if your machine has more than 4GB of memory. + +This variant of the kernel has numerous debugging options enabled. +It should only be installed when trying to gather additional information +on kernel bugs, as some of these options impact performance noticably. + +The kernel-libre-PAEdebug package is the upstream kernel without the +non-Free blobs it includes by default. + + +%define variant_summary The Linux kernel compiled with extra debugging enabled +%kernel_variant_package debug +%description debug +The kernel package contains the Linux kernel (vmlinuz), the core of any +GNU/Linux operating system. The kernel handles the basic functions +of the operating system: memory allocation, process allocation, device +input and output, etc. + +This variant of the kernel has numerous debugging options enabled. +It should only be installed when trying to gather additional information +on kernel bugs, as some of these options impact performance noticably. + +The kernel-libre-debug package is the upstream kernel without the +non-Free blobs it includes by default. + + +%prep +# do a few sanity-checks for --with *only builds +%if %{with_baseonly} +%if !%{with_up}%{with_pae} +echo "Cannot build --with baseonly, up build is disabled" +exit 1 +%endif +%endif + +%if %{with_smponly} +%if !%{with_smp} +echo "Cannot build --with smponly, smp build is disabled" +exit 1 +%endif +%endif + +# more sanity checking; do it quietly +if [ "%{patches}" != "%%{patches}" ] ; then + for patch in %{patches} ; do + if [ ! -f $patch ] ; then + echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing" + exit 1 + fi + done +fi 2>/dev/null + +patch_command='patch -p1 -F1 -s' +ApplyPatch() +{ + local patch=$1 + shift + if [ ! -f $RPM_SOURCE_DIR/$patch ]; then + exit 1 + fi +%if !%{using_upstream_branch} + if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME%%%%%{?variant}}.spec ; then + if [ "${patch:0:10}" != "patch-2.6." ] && + [ "${patch:0:16}" != "patch-libre-2.6." ] ; then + echo "ERROR: Patch $patch not listed as a source patch in specfile" + exit 1 + fi + fi 2>/dev/null + $RPM_SOURCE_DIR/deblob-check $RPM_SOURCE_DIR/$patch || exit 1 +%endif + case "$patch" in + *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;; + *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;; + *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;; + esac +} + +# don't apply patch if it's empty +ApplyOptionalPatch() +{ + local patch=$1 + shift + if [ ! -f $RPM_SOURCE_DIR/$patch ]; then + exit 1 + fi + local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}') + if [ "$C" -gt 9 ]; then + ApplyPatch $patch ${1+"$@"} + fi +} + +# we don't want a .config file when building firmware: it just confuses the build system +%define build_firmware \ + mv .config .config.firmware_save \ + make INSTALL_FW_PATH=$RPM_BUILD_ROOT/lib/firmware firmware_install \ + mv .config.firmware_save .config + +# First we unpack the kernel tarball. +# If this isn't the first make prep, we use links to the existing clean tarball +# which speeds things up quite a bit. + +# Update to latest upstream. +%if 0%{?released_kernel} +%define vanillaversion 2.6.%{base_sublevel} +# non-released_kernel case +%else +%if 0%{?rcrev} +%define vanillaversion 2.6.%{upstream_sublevel}-rc%{rcrev} +%if 0%{?gitrev} +%define vanillaversion 2.6.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev} +%endif +%else +# pre-{base_sublevel+1}-rc1 case +%if 0%{?gitrev} +%define vanillaversion 2.6.%{base_sublevel}-git%{gitrev} +%else +%define vanillaversion 2.6.%{base_sublevel} +%endif +%endif +%endif + +# %%{vanillaversion} : the full version name, e.g. 2.6.35-rc6-git3 +# %%{kversion} : the base version, e.g. 2.6.34 + +# Use kernel-%%{kversion}%%{?dist} as the top-level directory name +# so we can prep different trees within a single git directory. + +# Build a list of the other top-level kernel tree directories. +# This will be used to hardlink identical vanilla subdirs. +sharedirs=$(find "$PWD" -maxdepth 1 -type d -name 'kernel-2.6.*' \ + | grep -x -v "$PWD"/kernel-%{kversion}%{?dist}) ||: + +if [ ! -d kernel-%{kversion}%{?dist}/vanilla-%{vanillaversion} ]; then + + if [ -d kernel-%{kversion}%{?dist}/vanilla-%{kversion} ]; then + + # The base vanilla version already exists. + cd kernel-%{kversion}%{?dist} + + # Any vanilla-* directories other than the base one are stale. + for dir in vanilla-*; do + [ "$dir" = vanilla-%{kversion} ] || rm -rf $dir & + done + + else + + rm -f pax_global_header + # Look for an identical base vanilla dir that can be hardlinked. + for sharedir in $sharedirs ; do + if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then + break + fi + done + if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then +%setup -q -n kernel-%{kversion}%{?dist} -c -T + cp -rl $sharedir/vanilla-%{kversion} . + else +%setup -q -n kernel-%{kversion}%{?dist} -c + mv linux-%{kversion} vanilla-%{kversion} + fi + + fi + +perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION =/" vanilla-%{kversion}/Makefile + +%if "%{kversion}" != "%{vanillaversion}" + + for sharedir in $sharedirs ; do + if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then + break + fi + done + if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then + + cp -rl $sharedir/vanilla-%{vanillaversion} . + + else + + # Need to apply patches to the base vanilla version. + cp -rl vanilla-%{kversion} vanilla-%{vanillaversion} + cd vanilla-%{vanillaversion} + +# Update vanilla to the latest upstream. +# (non-released_kernel case only) +%if 0%{?rcrev} + ApplyPatch patch%{?rcrevlibre}-2.6.%{upstream_sublevel}-rc%{rcrev}.bz2 +%if 0%{?gitrev} + ApplyPatch patch%{?gitrevlibre}-2.6.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.bz2 +%endif +%else +# pre-{base_sublevel+1}-rc1 case +%if 0%{?gitrev} + ApplyPatch patch%{?gitrevlibre}-2.6.%{base_sublevel}-git%{gitrev}.bz2 +%endif +%endif + + cd .. + + fi + +%endif + +else + + # We already have all vanilla dirs, just change to the top-level directory. + cd kernel-%{kversion}%{?dist} + +fi + +# Now build the fedora kernel tree. +if [ -d linux-%{kversion}.%{_target_cpu} ]; then + # Just in case we ctrl-c'd a prep already + rm -rf deleteme.%{_target_cpu} + # Move away the stale away, and delete in background. + mv linux-%{kversion}.%{_target_cpu} deleteme.%{_target_cpu} + rm -rf deleteme.%{_target_cpu} & +fi + +cp -rl vanilla-%{vanillaversion} linux-%{kversion}.%{_target_cpu} + +cd linux-%{kversion}.%{_target_cpu} + +# released_kernel with possible stable updates +%if 0%{?stable_base} +ApplyPatch %{stable_patch_00} +%endif +%if 0%{?stable_rc} +ApplyPatch %{stable_patch_01} +%endif + +%if %{using_upstream_branch} +### BRANCH APPLY ### +%endif + +# Drop some necessary files from the source dir into the buildroot +cp $RPM_SOURCE_DIR/config-* . +cp %{SOURCE15} . + +# Dynamically generate kernel .config files from config-* files +make -f %{SOURCE20} VERSION=%{version} configs + +#if a rhel kernel, apply the rhel config options +%if 0%{?rhel} + for i in %{all_arch_configs} + do + mv $i $i.tmp + ./merge.pl config-rhel-generic $i.tmp > $i + rm $i.tmp + done +%endif + +ApplyOptionalPatch git-linus.diff + +ApplyPatch linux-2.6-makefile-after_link.patch + +# +# misc small stuff to make things compile +# +ApplyOptionalPatch linux-2.6-compile-fixes.patch + +# Freedo logo. +ApplyPatch freedo.patch + +%if !%{nopatches} + +# revert patches from upstream that conflict or that we get via other means +ApplyOptionalPatch linux-2.6-upstream-reverts.patch -R + +ApplyPatch linux-2.6-hotfixes.patch + +# Roland's utrace ptrace replacement. +ApplyPatch linux-2.6-tracehook.patch +ApplyPatch linux-2.6-utrace.patch +ApplyPatch linux-2.6-utrace-ptrace.patch + +# Architecture patches +# x86(-64) + +# +# Intel IOMMU +# + +# +# PowerPC +# + +# +# SPARC64 +# +ApplyPatch linux-2.6.29-sparc-IOC_TYPECHECK.patch + +# +# Exec shield +# +ApplyPatch linux-2.6-i386-nx-emulation.patch +ApplyPatch linux-2.6-32bit-mmap-exec-randomization.patch + +# +# bugfixes to drivers and filesystems +# + +# ext4 + +# xfs + +# btrfs + + +# eCryptfs + +# NFSv4 + +# USB + +# WMI + +# ACPI +ApplyPatch linux-2.6-defaults-acpi-video.patch +ApplyPatch linux-2.6-acpi-video-dos.patch +ApplyPatch acpi-ec-add-delay-before-write.patch +ApplyPatch linux-2.6-acpi-debug-infinite-loop.patch +ApplyPatch acpi-update-battery-information-on-notification-0x81.patch + +# Various low-impact patches to aid debugging. +ApplyPatch linux-2.6-debug-sizeof-structs.patch +ApplyPatch linux-2.6-debug-nmi-timeout.patch +ApplyPatch linux-2.6-debug-taint-vm.patch +ApplyPatch linux-2.6-debug-vm-would-have-oomkilled.patch +ApplyPatch linux-2.6-debug-always-inline-kzalloc.patch + +# +# PCI +# +# make default state of PCI MSI a config option +ApplyPatch linux-2.6-defaults-pci_no_msi.patch +ApplyPatch linux-2.6-defaults-pci_use_crs.patch +# enable ASPM by default on hardware we expect to work +ApplyPatch linux-2.6-defaults-aspm.patch +ApplyPatch pci-disable-aspm-if-bios-asks-us-to.patch +# rhbz#638912 +ApplyPatch pci-_osc-supported-field-should-contain-supported-features-not-enabled-ones.patch + +#ApplyPatch ima-allow-it-to-be-completely-disabled-and-default-off.patch + +# +# SCSI Bits. +# + +# ACPI + +# ALSA +ApplyPatch hda_intel-prealloc-4mb-dmabuffer.patch + +# Networking + +# Misc fixes +# The input layer spews crap no-one cares about. +ApplyPatch linux-2.6-input-kill-stupid-messages.patch + +# stop floppy.ko from autoloading during udev... +ApplyPatch die-floppy-die.patch + +ApplyPatch linux-2.6.30-no-pcspkr-modalias.patch + +#ApplyPatch thinkpad-acpi-fix-backlight.patch + +# Allow to use 480600 baud on 16C950 UARTs +ApplyPatch linux-2.6-serial-460800.patch + +# Silence some useless messages that still get printed with 'quiet' +ApplyPatch linux-2.6-silence-noise.patch + +# Make fbcon not show the penguins with 'quiet' +ApplyPatch linux-2.6-silence-fbcon-logo.patch + +# Fix the SELinux mprotect checks on executable mappings +#ApplyPatch linux-2.6-selinux-mprotect-checks.patch +# Fix SELinux for sparc +# FIXME: Can we drop this now? See updated linux-2.6-selinux-mprotect-checks.patch +#ApplyPatch linux-2.6-sparc-selinux-mprotect-checks.patch + +# Changes to upstream defaults. + + +# /dev/crash driver. +ApplyPatch linux-2.6-crash-driver.patch + +# Hack e1000e to work on Montevina SDV +ApplyPatch linux-2.6-e1000-ich9-montevina.patch + +# crypto/ + +# Assorted Virt Fixes +ApplyPatch fix_xen_guest_on_old_EC2.patch + +# DRM core + +# Nouveau DRM +ApplyOptionalPatch drm-nouveau-updates.patch + +# Intel DRM +ApplyOptionalPatch drm-intel-next.patch +ApplyPatch drm-intel-big-hammer.patch +ApplyPatch drm-intel-make-lvds-work.patch +ApplyPatch linux-2.6-intel-iommu-igfx.patch +ApplyPatch drm-intel-edp-fixes.patch + +# linux1394 git patches +#ApplyPatch linux-2.6-firewire-git-update.patch +#ApplyOptionalPatch linux-2.6-firewire-git-pending.patch + +# silence the ACPI blacklist code +ApplyPatch linux-2.6-silence-acpi-blacklist.patch + +# V4L/DVB updates/fixes/experimental drivers +# apply if non-empty +ApplyOptionalPatch linux-2.6-v4l-dvb-fixes.patch +ApplyOptionalPatch linux-2.6-v4l-dvb-update.patch +ApplyOptionalPatch linux-2.6-v4l-dvb-experimental.patch +#ApplyPatch linux-2.6-v4l-dvb-uvcvideo-update.patch +#ApplyPatch linux-2.6-v4l-dvb-ir-core-update.patch + +###FIX###ApplyPatch linux-2.6-v4l-dvb-add-lgdt3304-support.patch + +# http://www.lirc.org/ +#ApplyOptionalPatch lirc-staging-2.6.36-fixes.patch +# enable IR receiver on Hauppauge HD PVR (v4l-dvb merge pending) +ApplyPatch hdpvr-ir-enable.patch + +# rhbz#664852 +ApplyPatch flexcop-fix-xlate_proc_name-warning.patch + +# Patches headed upstream +ApplyPatch disable-i8042-check-on-apple-mac.patch + +ApplyPatch add-appleir-usb-driver.patch + +ApplyPatch neuter_intel_microcode_load.patch + +# try to fix stalls during boot (#530393) +ApplyPatch tpm-fix-stall-on-boot.patch + +# various fixes for Apple and EFI +ApplyPatch applesmc_update.patch +ApplyPatch apple_backlight.patch +ApplyPatch efifb_update.patch +ApplyPatch linux-next-macbook-air-input.patch +ApplyPatch acpi_reboot.patch +ApplyPatch efi_default_physical.patch + +# Runtime PM +ApplyPatch linux-2.6-usb-pci-autosuspend.patch +ApplyPatch linux-2.6-enable-more-pci-autosuspend.patch +ApplyPatch runtime_pm_fixups.patch + +# rhbz#605888 +ApplyPatch dmar-disable-when-ricoh-multifunction.patch + +# rhbz#630464 +ApplyPatch debug-tty-print-dev-name.patch + +# backport some fixes for kswapd from mmotm, rhbz#649694 +ApplyPatch mm-page-allocator-adjust-the-per-cpu-counter-threshold-when-memory-is-low.patch +ApplyPatch mm-vmstat-use-a-single-setter-function-and-callback-for-adjusting-percpu-thresholds.patch + +# rhbz#662344,600690 +ApplyPatch fs-call-security_d_instantiate-in-d_obtain_alias.patch + +# rhbz#637619 +ApplyPatch net-AF_PACKET-vmalloc.patch + +# END OF PATCH APPLICATIONS + +%endif + +# Any further pre-build tree manipulations happen here. + +chmod +x scripts/checkpatch.pl + +touch .scmversion + +# only deal with configs if we are going to build for the arch +%ifnarch %nobuildarches + +mkdir configs + +# Remove configs not for the buildarch +for cfg in kernel-%{version}-*.config; do + if [ `echo %{all_arch_configs} | grep -c $cfg` -eq 0 ]; then + rm -f $cfg + fi +done + +%if !%{debugbuildsenabled} +rm -f kernel-%{version}-*debug.config +%endif + +# now run oldconfig over all the config files +for i in *.config +do + mv $i .config + Arch=`head -1 .config | cut -b 3-` + make ARCH=$Arch listnewconfig | grep -E '^CONFIG_' >.newoptions || true +%if %{listnewconfig_fail} + if [ -s .newoptions ]; then + cat .newoptions + exit 0 + fi +%endif + rm -f .newoptions + make ARCH=$Arch oldnoconfig + echo "# $Arch" > configs/$i + cat .config >> configs/$i +done +# end of kernel config +%endif + +# get rid of unwanted files resulting from patch fuzz +find . \( -name "*.orig" -o -name "*~" \) -exec rm -f {} \; >/dev/null + +# remove unnecessary SCM files +find . -name .gitignore -exec rm -f {} \; >/dev/null + +cd .. + +### +### build +### +%build + +%if %{with_sparse} +%define sparse_mflags C=1 +%endif + +%if %{fancy_debuginfo} +# This override tweaks the kernel makefiles so that we run debugedit on an +# object before embedding it. When we later run find-debuginfo.sh, it will +# run debugedit again. The edits it does change the build ID bits embedded +# in the stripped object, but repeating debugedit is a no-op. We do it +# beforehand to get the proper final build ID bits into the embedded image. +# This affects the vDSO images in vmlinux, and the vmlinux image in bzImage. +export AFTER_LINK=\ +'sh -xc "/usr/lib/rpm/debugedit -b $$RPM_BUILD_DIR -d /usr/src/debug \ + -i $@ > $@.id"' +%endif + +cp_vmlinux() +{ + eu-strip --remove-comment -o "$2" "$1" +} + +BuildKernel() { + MakeTarget=$1 + KernelImage=$2 + Flavour=$3 + InstallName=${4:-vmlinuz} + + # Pick the right config file for the kernel we're building + Config=kernel-%{version}-%{_target_cpu}${Flavour:+-${Flavour}}.config + DevelDir=/usr/src/kernels/%{KVERREL}${Flavour:+.${Flavour}} + + # When the bootable image is just the ELF kernel, strip it. + # We already copy the unstripped file into the debuginfo package. + if [ "$KernelImage" = vmlinux ]; then + CopyKernel=cp_vmlinux + else + CopyKernel=cp + fi + + KernelVer=%{version}-libre.%{release}.%{_target_cpu}${Flavour:+.${Flavour}} + echo BUILDING A KERNEL FOR ${Flavour} %{_target_cpu}... + + # make sure EXTRAVERSION says what we want it to say + perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = %{?stablerev}-libre.%{release}.%{_target_cpu}${Flavour:+.${Flavour}}/" Makefile + + # if pre-rc1 devel kernel, must fix up SUBLEVEL for our versioning scheme + %if !0%{?rcrev} + %if 0%{?gitrev} + perl -p -i -e 's/^SUBLEVEL.*/SUBLEVEL = %{upstream_sublevel}/' Makefile + %endif + %endif + + # and now to start the build process + + make -s mrproper + cp configs/$Config .config + + Arch=`head -1 .config | cut -b 3-` + echo USING ARCH=$Arch + + make -s ARCH=$Arch oldnoconfig >/dev/null + make -s ARCH=$Arch V=1 %{?_smp_mflags} $MakeTarget %{?sparse_mflags} + make -s ARCH=$Arch V=1 %{?_smp_mflags} modules %{?sparse_mflags} || exit 1 + + # Start installing the results +%if %{with_debuginfo} + mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/boot + mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path} +%endif + mkdir -p $RPM_BUILD_ROOT/%{image_install_path} + install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer + install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer + + # We estimate the size of the initramfs because rpm needs to take this size + # into consideration when performing disk space calculations. (See bz #530778) + dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20 + + if [ -f arch/$Arch/boot/zImage.stub ]; then + cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || : + fi + $CopyKernel $KernelImage \ + $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer + chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer + + mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer + # Override $(mod-fw) because we don't want it to install any firmware + # We'll do that ourselves with 'make firmware_install' + make -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_install KERNELRELEASE=$KernelVer mod-fw= +%ifarch %{vdso_arches} + make -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer + if [ ! -s ldconfig-kernel.conf ]; then + echo > ldconfig-kernel.conf "\ +# Placeholder file, no vDSO hwcap entries used in this kernel." + fi + %{__install} -D -m 444 ldconfig-kernel.conf \ + $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf +%endif + + # And save the headers/makefiles etc for building modules against + # + # This all looks scary, but the end result is supposed to be: + # * all arch relevant include/ files + # * all Makefile/Kconfig files + # * all script/ files + + rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build + rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source + mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build + (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source) + # dirs for additional modules per module-init-tools, kbuild/modules.txt + mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/extra + mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates + # first copy everything + cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build + cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build + cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build + if [ -s Module.markers ]; then + cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build + fi + # then drop all but the needed Makefiles/Kconfig files + rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Documentation + rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts + rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include + cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build + cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build + if [ -d arch/$Arch/scripts ]; then + cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || : + fi + if [ -f arch/$Arch/*lds ]; then + cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || : + fi + rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*.o + rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*/*.o +%ifarch ppc + cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ +%endif + if [ -d arch/%{asmarch}/include ]; then + cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + fi + cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include + + # Make sure the Makefile and version.h have a matching timestamp so that + # external modules can be built + touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/linux/version.h + touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/linux/autoconf.h + # Copy .config to include/config/auto.conf so "make prepare" is unnecessary. + cp $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf + +%if %{fancy_debuginfo} + if test -s vmlinux.id; then + cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id + else + echo >&2 "*** ERROR *** no vmlinux build ID! ***" + exit 1 + fi +%endif + + # + # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm + # +%if %{with_debuginfo} + mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer + cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer +%endif + + find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames + + # mark modules executable so that strip-to-file can strip them + xargs --no-run-if-empty chmod u+x < modnames + + # Generate a list of modules for block and networking. + + grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA | + sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef + + collect_modules_list() + { + sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef | + LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1 + } + + collect_modules_list networking \ + 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register' + collect_modules_list block \ + 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler' + collect_modules_list drm \ + 'drm_open|drm_init' + collect_modules_list modesetting \ + 'drm_crtc_init' + + # detect missing or incorrect license tags + rm -f modinfo + while read i + do + echo -n "${i#$RPM_BUILD_ROOT/lib/modules/$KernelVer/} " >> modinfo + /sbin/modinfo -l $i >> modinfo + done < modnames + + grep -E -v \ + 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' \ + modinfo && exit 1 + + rm -f modinfo modnames + + # remove files that will be auto generated by depmod at rpm -i time + for i in alias alias.bin ccwmap dep dep.bin ieee1394map inputmap isapnpmap ofmap pcimap seriomap symbols symbols.bin usbmap + do + rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$i + done + + # Move the devel headers out of the root file system + mkdir -p $RPM_BUILD_ROOT/usr/src/kernels + mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir + ln -sf ../../..$DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build + + # prune junk from kernel-devel + find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -exec rm -f {} \; +} + +### +# DO it... +### + +# prepare directories +rm -rf $RPM_BUILD_ROOT +mkdir -p $RPM_BUILD_ROOT/boot +mkdir -p $RPM_BUILD_ROOT%{_libexecdir} + +cd linux-%{kversion}.%{_target_cpu} + +%if %{with_debug} +BuildKernel %make_target %kernel_image debug +%endif + +%if %{with_pae_debug} +BuildKernel %make_target %kernel_image PAEdebug +%endif + +%if %{with_pae} +BuildKernel %make_target %kernel_image PAE +%endif + +%if %{with_up} +BuildKernel %make_target %kernel_image +%endif + +%if %{with_smp} +BuildKernel %make_target %kernel_image smp +%endif + +%global perf_make \ + make %{?_smp_mflags} -C tools/perf -s V=1 HAVE_CPLUS_DEMANGLE=1 prefix=%{_prefix} +%if %{with_perf} +%{perf_make} all +%{perf_make} man || %{doc_build_fail} +%endif + +%if %{with_doc} +# Make the HTML and man pages. +make %{?_smp_mflags} htmldocs mandocs || %{doc_build_fail} + +# sometimes non-world-readable files sneak into the kernel source tree +chmod -R a=rX Documentation +find Documentation -type d | xargs chmod u+w +%endif + +### +### Special hacks for debuginfo subpackages. +### + +# This macro is used by %%install, so we must redefine it before that. +%define debug_package %{nil} + +%if %{fancy_debuginfo} +%define __debug_install_post \ + /usr/lib/rpm/find-debuginfo.sh %{debuginfo_args} %{_builddir}/%{?buildsubdir}\ +%{nil} +%endif + +%if %{with_debuginfo} +%ifnarch noarch +%global __debug_package 1 +%files -f debugfiles.list debuginfo-common-%{_target_cpu} +%defattr(-,root,root) +%endif +%endif + +### +### install +### + +%install + +cd linux-%{kversion}.%{_target_cpu} + +%if %{with_doc} +docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{rpmversion} +man9dir=$RPM_BUILD_ROOT%{_datadir}/man/man9 + +# copy the source over +mkdir -p $docdir +tar -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir + +# Install man pages for the kernel API. +mkdir -p $man9dir +find Documentation/DocBook/man -name '*.9.gz' -print0 | +xargs -0 --no-run-if-empty %{__install} -m 444 -t $man9dir $m +ls $man9dir | grep -q '' || > $man9dir/BROKEN +%endif # with_doc + +%if %{with_perf} +# perf tool binary and supporting scripts/binaries +%{perf_make} DESTDIR=$RPM_BUILD_ROOT install + +# perf man pages (note: implicit rpm magic compresses them later) +%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man || %{doc_build_fail} +%endif + +%if %{with_headers} +# Install kernel headers +make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install + +# Do headers_check but don't die if it fails. +make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_check \ + > hdrwarnings.txt || : +if grep -q exist hdrwarnings.txt; then + sed s:^$RPM_BUILD_ROOT/usr/include/:: hdrwarnings.txt + # Temporarily cause a build failure if header inconsistencies. + # exit 1 +fi + +find $RPM_BUILD_ROOT/usr/include \ + \( -name .install -o -name .check -o \ + -name ..install.cmd -o -name ..check.cmd \) | xargs rm -f + +# glibc provides scsi headers for itself, for now +rm -rf $RPM_BUILD_ROOT/usr/include/scsi +rm -f $RPM_BUILD_ROOT/usr/include/asm*/atomic.h +rm -f $RPM_BUILD_ROOT/usr/include/asm*/io.h +rm -f $RPM_BUILD_ROOT/usr/include/asm*/irq.h +%endif + +%if %{with_firmware} +%{build_firmware} +%endif + +%if %{with_bootwrapper} +make DESTDIR=$RPM_BUILD_ROOT bootwrapper_install WRAPPER_OBJDIR=%{_libdir}/kernel-wrapper WRAPPER_DTSDIR=%{_libdir}/kernel-wrapper/dts +%endif + + +### +### clean +### + +%clean +rm -rf $RPM_BUILD_ROOT + +### +### scripts +### + +# +# This macro defines a %%post script for a kernel*-devel package. +# %%kernel_devel_post [<subpackage>] +# +%define kernel_devel_post() \ +%{expand:%%post %{?1:%{1}-}devel}\ +if [ -f /etc/sysconfig/kernel ]\ +then\ + . /etc/sysconfig/kernel || exit $?\ +fi\ +if [ "$HARDLINK" != "no" -a -x /usr/sbin/hardlink ]\ +then\ + (cd /usr/src/kernels/%{KVERREL}%{?1:.%{1}} &&\ + /usr/bin/find . -type f | while read f; do\ + hardlink -c /usr/src/kernels/*.fc*.*/$f $f\ + done)\ +fi\ +%{nil} + +# This macro defines a %%posttrans script for a kernel package. +# %%kernel_variant_posttrans [<subpackage>] +# More text can follow to go at the end of this variant's %%post. +# +%define kernel_variant_posttrans() \ +%{expand:%%posttrans %{?1}}\ +/sbin/new-kernel-pkg --package kernel-libre%{?-v:-%{-v*}} --mkinitrd --dracut --depmod --update %{KVERREL}%{?-v:.%{-v*}} || exit $?\ +/sbin/new-kernel-pkg --package kernel-libre%{?1:-%{1}} --rpmposttrans %{KVERREL}%{?1:.%{1}} || exit $?\ +%{nil} + +# +# This macro defines a %%post script for a kernel package and its devel package. +# %%kernel_variant_post [-v <subpackage>] [-r <replace>] +# More text can follow to go at the end of this variant's %%post. +# +%define kernel_variant_post(v:r:) \ +%{expand:%%kernel_devel_post %{?-v*}}\ +%{expand:%%kernel_variant_posttrans %{?-v*}}\ +%{expand:%%post %{?-v*}}\ +%{-r:\ +if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\ + [ -f /etc/sysconfig/kernel ]; then\ + /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel-libre%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\ +fi}\ +%{expand:\ +/sbin/new-kernel-pkg --package kernel-libre%{?-v:-%{-v*}} --install %{KVERREL}%{?-v:.%{-v*}} || exit $?\ +}\ +%{nil} + +# +# This macro defines a %%preun script for a kernel package. +# %%kernel_variant_preun <subpackage> +# +%define kernel_variant_preun() \ +%{expand:%%preun %{?1}}\ +/sbin/new-kernel-pkg --rminitrd --rmmoddep --remove %{KVERREL}%{?1:.%{1}} || exit $?\ +%{nil} + +%kernel_variant_preun +%kernel_variant_post -r kernel-smp + +%kernel_variant_preun smp +%kernel_variant_post -v smp + +%kernel_variant_preun PAE +%kernel_variant_post -v PAE -r (kernel|kernel-smp) + +%kernel_variant_preun debug +%kernel_variant_post -v debug + +%kernel_variant_post -v PAEdebug -r (kernel|kernel-smp) +%kernel_variant_preun PAEdebug + +if [ -x /sbin/ldconfig ] +then + /sbin/ldconfig -X || exit $? +fi + +### +### file lists +### + +%if %{with_headers} +%files headers +%defattr(-,root,root) +/usr/include/* +%endif + +%if %{with_firmware} +%files firmware +%defattr(-,root,root) +/lib/firmware/* +%doc linux-%{kversion}.%{_target_cpu}/firmware/WHENCE +%endif + +%if %{with_bootwrapper} +%files bootwrapper +%defattr(-,root,root) +/usr/sbin/* +%{_libdir}/kernel-wrapper +%endif + +# only some architecture builds need kernel-doc +%if %{with_doc} +%files doc +%defattr(-,root,root) +%{_datadir}/doc/kernel-doc-%{rpmversion}/Documentation/* +%dir %{_datadir}/doc/kernel-doc-%{rpmversion}/Documentation +%dir %{_datadir}/doc/kernel-doc-%{rpmversion} +%{_datadir}/man/man9/* +%endif + +%if %{with_perf} +%files -n perf-libre +%defattr(-,root,root) +%{_bindir}/perf +%dir %{_libexecdir}/perf-core +%{_libexecdir}/perf-core/* +%{_mandir}/man[1-8]/* +%endif + +# This is %%{image_install_path} on an arch where that includes ELF files, +# or empty otherwise. +%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}} + +# +# This macro defines the %%files sections for a kernel package +# and its devel and debuginfo packages. +# %%kernel_variant_files [-k vmlinux] <condition> <subpackage> +# +%define kernel_variant_files(k:) \ +%if %{1}\ +%{expand:%%files %{?2}}\ +%defattr(-,root,root)\ +/%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?2:.%{2}}\ +%attr(600,root,root) /boot/System.map-%{KVERREL}%{?2:.%{2}}\ +/boot/config-%{KVERREL}%{?2:.%{2}}\ +%dir /lib/modules/%{KVERREL}%{?2:.%{2}}\ +/lib/modules/%{KVERREL}%{?2:.%{2}}/kernel\ +/lib/modules/%{KVERREL}%{?2:.%{2}}/build\ +/lib/modules/%{KVERREL}%{?2:.%{2}}/source\ +/lib/modules/%{KVERREL}%{?2:.%{2}}/extra\ +/lib/modules/%{KVERREL}%{?2:.%{2}}/updates\ +%ifarch %{vdso_arches}\ +/lib/modules/%{KVERREL}%{?2:.%{2}}/vdso\ +/etc/ld.so.conf.d/kernel-%{KVERREL}%{?2:.%{2}}.conf\ +%endif\ +/lib/modules/%{KVERREL}%{?2:.%{2}}/modules.*\ +%ghost /boot/initramfs-%{KVERREL}%{?2:.%{2}}.img\ +%{expand:%%files %{?2:%{2}-}devel}\ +%defattr(-,root,root)\ +/usr/src/kernels/%{KVERREL}%{?2:.%{2}}\ +%if %{with_debuginfo}\ +%ifnarch noarch\ +%if %{fancy_debuginfo}\ +%{expand:%%files -f debuginfo%{?2}.list %{?2:%{2}-}debuginfo}\ +%else\ +%{expand:%%files %{?2:%{2}-}debuginfo}\ +%endif\ +%defattr(-,root,root)\ +%if !%{fancy_debuginfo}\ +%if "%{elf_image_install_path}" != ""\ +%{debuginfodir}/%{elf_image_install_path}/*-%{KVERREL}%{?2:.%{2}}.debug\ +%endif\ +%{debuginfodir}/lib/modules/%{KVERREL}%{?2:.%{2}}\ +%{debuginfodir}/usr/src/kernels/%{KVERREL}%{?2:.%{2}}\ +%endif\ +%endif\ +%endif\ +%endif\ +%{nil} + + +%kernel_variant_files %{with_up} +%kernel_variant_files %{with_smp} smp +%kernel_variant_files %{with_debug} debug +%kernel_variant_files %{with_pae} PAE +%kernel_variant_files %{with_pae_debug} PAEdebug + +# plz don't put in a version string unless you're going to tag +# and build. + +# ___________________________________________________________ +# / This branch is for Fedora 15. You probably want to commit \ +# \ to the F-14 branch instead, or in addition to this one. / +# ----------------------------------------------------------- +# \ ^__^ +# \ (@@)\_______ +# (__)\ )\/\ +# ||----w | +# || || + +%changelog +* Wed Jan 05 2011 Alexandre Oliva <lxoliva@fsfla.org> -libre +- Deblobbed to 2.6.37-libre. + +* Tue Jan 04 2011 Kyle McMartin <kyle@redhat.com> 2.6.37-1 +- Track release of 2.6.37 + +* Mon Jan 03 2011 Alexandre Oliva <lxoliva@fsfla.org> -libre +- Deblobbed patch-libre-2.6.37-rc8. + +* Mon Jan 03 2011 Kyle McMartin <kyle@redhat.com> 2.6.37-0.rc8.git3.1 +- Linux 2.6.37-rc8-git3 +- Merged acpi battery notification patch and -rc8. + +* Thu Dec 23 2010 Kyle McMartin <kyle@redhat.com> +- Pull in flexcop procfs rename patch since it's still not upstream. (#664852) + +* Tue Dec 21 2010 Alexandre Oliva <lxoliva@fsfla.org> -libre Tue Dec 28 +- Deblobbed patch-libre-2.6.37-rc7. + +* Tue Dec 21 2010 Kyle McMartin <kyle@redhat.com> 2.6.37.0.rc7.git0.2 +- Linux 2.6.37-rc7 +- CONFIG_USB_OTG=n (seems unnecessary?) +- Enable release builds until .37 releases in rawhide. + +* Sun Dec 19 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.rc6.git5.1 +- Linux 2.6.37-rc6-git5 +- sched-cure-more-NO_HZ-load-average-woes.patch: upstream. + +* Sat Dec 18 2010 Kyle McMartin <kyle@redhat.com> +- Patch from nhorman against f13: + Enhance AF_PACKET to allow non-contiguous buffer alloc (#637619) + +* Sat Dec 18 2010 Kyle McMartin <kyle@redhat.com> +- Fix SELinux issues with NFS/btrfs and/or xfsdump. (#662344) + +* Fri Dec 17 2010 Matthew Garrett <mjg@redhat.com> 2.6.37-0.rc6.git0.3 +- efi_default_physical.patch: Revert hunk that breaks boot +- linux-next-macbook-air-input.patch: Add input support for new Macbook Airs + +* Thu Dec 16 2010 Matthew Garrett <mjg@redhat.com> 2.6.37-0.rc6.git0.2 +- applesmc_update.patch: Make the driver more generic. Should help Apples. +- apple_backlight.patch: Make sure that this loads on all hardware. +- efifb_update.patch: Fixes for the 11 inch Macbook Air +- acpi_reboot.patch: Should make reboot work better on most hardware +- efi_default_physical.patch: Some machines dislike EFI virtual mode + +* Wed Dec 15 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.rc6.git0.1 +- Linux 2.6.37-rc6 +- Re-activate acpi patch which rejected on the previous commit. + +* Wed Dec 15 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.rc5.git5.1 +- 2.6.37-rc5-git5 + +* Fri Dec 10 2010 Kyle McMartin <kyle@redhat.com> +- Another patch from mjg59: Set _OSC supported field correctly (#638912) + +* Fri Dec 10 2010 Kyle McMartin <kyle@redhat.com> +- pci-disable-aspm-if-bios-asks-us-to.patch: Patch from mjg59 to disable + ASPM if the BIOS has disabled it, but enabled it already on some devices. + +* Thu Dec 09 2010 Kyle McMartin <kyle@redhat.com> +- Snarf patch from wireless-next to fix mdomsch's orinico wifi. + (orinoco: initialise priv->hw before assigning the interrupt) + [229bd792] (#657864) + +* Thu Dec 09 2010 Alexandre Oliva <lxoliva@fsfla.org> -libre Mon Dec 27 +- Deblobbed patch-libre-2.6.37-rc5. + +* Wed Dec 08 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.rc5.git2.1 +- Linux 2.6.37-rc5-git2 +- sched-cure-more-NO_HZ-load-average-woes.patch: fix some of the complaints + in 2.6.35+ about load average with dynticks. (rhbz#650934) + +* Tue Dec 07 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.rc5.git0.1 +- Linux 2.6.37-rc5 + +* Sat Dec 04 2010 Kyle McMartin <kyle@redhat.com> +- Enable C++ symbol demangling with perf by linking against libiberty.a, + which is LGPL2. + +* Fri Dec 03 2010 Kyle McMartin <kyle@redhat.com> +- Linux 2.6.37-rc4-git3 +- Enable HP ILO on x86_64 for (#571329) +- Drop merged drm-fixes.patch, split out edp-fixes. +- tty-dont-allow-reopen-when-ldisc-is-changing.patch: upstream. +- tty-ldisc-fix-open-flag-handling.patch: upstream. +- Enable CIFS_ACL. + +* Thu Dec 02 2010 Kyle McMartin <kyle@redhat.com> +- Grab some of Mel's fixes from -mmotm to hopefully sort out #649694. + +* Wed Dec 01 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.rc4.git1.1 +- Linux 2.6.37-rc4-git1 +- Pull in DRM fixes that are queued for -rc5 [3074adc8] + + edp-fixes on top + +* Tue Nov 30 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.rc4.git0.1 +- Linux 2.6.37-rc4 + +* Mon Nov 29 2010 Kyle McMartin <kyle@redhat.com> +- Update debug-vm-would_have_oomkilled patch. + +* Mon Nov 29 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.rc3.git6.1 +- Linux 2.6.37-rc3-git6 +- TTY: open/hangup race fixup (rhbz#630464) + +* Fri Nov 26 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.rc3.git3.1 +- Linux 2.6.37-rc3-git3 +- Print tty->flags as well in debugging patch... + +* Fri Nov 26 2010 Kyle McMartin <kyle@redhat.com> +- Copy tty_open WARN_ON debugging patch from rawhide. + +* Fri Nov 26 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.rc3.git2.1 +- Linux 2.6.37-rc3-git2 +- CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set, so the cgroup memory + resource controller swap accounting is disabled by default. You can + enable it with 'swapaccount' if desired. +- TTY: don't allow reopen when ldisc is changing (rhbz#630464) + +* Wed Nov 24 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.rc3.git1.1 +- Linux 2.6.37-rc3-git1 + +* Mon Nov 22 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.rc3.git0.1 +- Linux 2.6.37-rc3 + +* Sat Nov 20 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.rc2.git7.1 +- Linux 2.6.37-rc2-git7 + +* Fri Nov 19 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.rc2.git5.1 +- Linux 2.6.37-rc2-git5 + +* Thu Nov 18 2010 Kyle McMartin <kyle@redhat.com> +- Move %{fedora_build} in the un-released (ie: -git/-rc) kernel case for + a variety of reasons, principally so that: + 1: Bumping %baserelease isn't needed if we're just updating snapshots. + 2: %buildid will sort as newer so we don't need to bump baserelease when + building bugzilla fixes. + +* Wed Nov 17 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.1.rc2.git2 +- Linux 2.6.37-rc2-git2 +- enable STRICT_DEVMEM on s390x. + +* Wed Nov 17 2010 Kyle McMartin <kyle@redhat.com> +- Make vmlinuz/System.map root read-write only by default. You can just + chmod 644 them later if you (unlikely) need them without root. + +* Mon Nov 15 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.1.rc2.git0 +- Linux 2.6.37-rc2 + +* Sat Nov 13 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.1.rc1.git10 +- Linux 2.6.37-rc1-git10 +- SECURITY_DMESG_RESTRICT added, the principle of least surprise dictates + we should probably have it off. If you want to restrict dmesg access + you may use the kernel.dmesg_restrict sysctl. +- linux-2.6-bluetooth-autosuspend.patch: merged upstream. + +* Tue Nov 09 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.1.rc1.git7 +- Linux 2.6.37-rc1-git7 + +* Mon Nov 08 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.1.rc1.git5 +- Linux 2.6.37-rc1-git5 + +* Mon Nov 08 2010 Kyle McMartin <kyle@redhat.com> +- Cherry-pick utrace-ptrace fixes from mayoung. Thanks! + +* Tue Nov 02 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.1.rc1.git0 +- Linux 2.6.37-rc1 + +* Tue Oct 26 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.1.rc0.git8 +- Linux 2.6.36-git8 + +* Fri Oct 22 2010 Kyle McMartin <kyle@redhat.com> 2.6.37-0.1.rc0.git2 +- Switch to tracking git snapshots of what will become 2.6.37. +- Fix context rejects in utrace and a few other patches. + +* Thu Oct 21 2010 Alexandre Oliva <lxoliva@fsfla.org> -libre +* Deblobbed 2.6.36-libre. + +* Wed Oct 20 2010 Chuck Ebbert <cebbert@redhat.com> 2.6.36-1 +- Linux 2.6.36 + +* Wed Oct 20 2010 Matthew Garrett <mjg@redhat.com> 2.6.36-0.42.rc8.git5 +- runtime_pm_fixups.patch: should fix this on Thinkpads + +* Tue Oct 19 2010 Chuck Ebbert <cebbert@redhat.com> 2.6.36-0.41.rc8.git5 +- Linux 2.6.36-rc8-git5 +- Update PCI _CRS fixes + +* Mon Oct 18 2010 Kyle McMartin <kyle@redhat.com> 2.6.36-0.40.rc8.git0 +- Backport xHCI suspend/resume code from linux-next. + +* Mon Oct 18 2010 Kyle McMartin <kyle@redhat.com> +- ima: Default it to off, pass ima=on to enable. Reduce impact of the option + when disabled. + +* Mon Oct 18 2010 Kyle McMartin <kyle@redhat.com> +- Quirk to disable DMAR with Ricoh card reader/firewire. (rhbz#605888) + +* Fri Oct 15 2010 Kyle McMartin <kyle@redhat.com> +- Switched to pci=use_crs by default (it should have been fixed since + cebbert sucked in the patches anyway.) + +* Fri Oct 15 2010 Kyle McMartin <kyle@redhat.com> +- backport pnpacpi-cope-with-invalid-device-ids from linux-next. + (rhbz#641468) + +* Fri Oct 15 2010 Alexandre Oliva <lxoliva@fsfla.org> -libre +- Deblobbed patch-libre-2.6.36-rc8. + +* Fri Oct 15 2010 Kyle McMartin <kyle@redhat.com> 2.6.36-0.39.rc8.git0 +- Linux 2.6.36-rc8. + +* Thu Oct 14 2010 Kyle McMartin <kyle@redhat.com> 2.6.36-0.38.rc7.git5 +- Linux 2.6.36-rc7-git5 +- Disable runtime PM until it can be poked at. + +* Tue Oct 12 2010 Kyle McMartin <kyle@redhat.com> 2.6.36-0.36.rc7.git3 +- Linux 2.6.36-rc7-git3 +- Drop fix-oldnoconfig-to-dtrt.patch, nonintconfig patches are upstream! + +* Mon Oct 11 2010 Matthew Garrett <mjg@redhat.com> 2.6.36-0.35.rc7.git1 +- linux-2.6-enable-more-pci-autosuspend.patch: Enable more PCI autosuspend + +* Wed Oct 6 2010 Alexandre Oliva <lxoliva@fsfla.org> -libre +- Deblobbed patch-libre-2.6.36-rc7. + +* Wed Oct 06 2010 Kyle McMartin <kyle@redhat.com> 2.6.36-0.35.rc7.git0 +- Linux 2.6.36-rc7 upstream. + +* Wed Oct 06 2010 Dave Jones <davej@redhat.com> +- Another day, another rcu_dereference warning. (#640673) + +* Tue Oct 05 2010 Kyle McMartin <kyle@redhat.com> 2.6.36-0.34.rc6.git3 +- Linux 2.6.36-rc6-git3 +- Drop intel_ips patches merged upstream. + +* Sun Oct 03 2010 Kyle McMartin <kyle@redhat.com> 2.6.36-0.32.rc6.git2 +- Enable printk.time by default for more useful logs. + +* Sat Oct 02 2010 Kyle McMartin <kyle@redhat.com> 2.6.36-0.31.rc6.git2 +- Linux 2.6.36-rc6-git2 + +* Thu Sep 30 2010 Dave Jones <davej@redhat.com> +- silence another rcu_reference warning + +* Thu Sep 30 2010 Kyle McMartin <kyle@redhat.com> 2.6.36-0.30.rc6 +- Collection of patches to make intel_ips work properly. + +* Wed Sep 29 2010 Dave Jones <davej@redhat.com> +- Add back an old hack to make an SDV e1000e variant work. + +* Wed Sep 29 2010 Dave Jones <davej@redhat.com> +- Enable IB700 watchdog (used by qemu/kvm). (#637152) + +* Tue Sep 28 2010 Alexandre Oliva <lxoliva@fsfla.org> -libre +- Deblobbed patch-libre-2.6.36-rc6. + +* Tue Sep 28 2010 Kyle McMartin <kyle@redhat.com> 2.6.36-0.28.rc6 +- Linux 2.6.36-rc6 + +* Fri Sep 24 2010 Chuck Ebbert <cebbert@redhat.com> 2.6.36-0.27.rc5.git6 +- Linux 2.6.36-rc5-git6 + +* Thu Sep 23 2010 Kyle McMartin <kyle@redhat.com> +- Bump x86 NR_CPUS to 64. (Still 512/256 on x86_64.) + +* Thu Sep 23 2010 Chuck Ebbert <cebbert@redhat.com> 2.6.36-0.26.rc5.git4 +- Linux 2.6.36-rc5-git4 +- Drop merged patches: + fix-icebp-breakpoints.patch + linux-2.6.35.4-virtio_console-fix-poll.patch +- Add patches to fix problems with PCI _CRS + +* Thu Sep 23 2010 Kyle McMartin <kyle@redhat.com> 2.6.36-0.25.rc5 +- Add s390 vdso AFTER_LINK to Roland's linux-2.6-makefile-after_link.patch + +* Thu Sep 23 2010 Kyle McMartin <kyle@redhat.com> +- Snipe ACPI patch from mjg59 to fix battery levels on some laptops. + +* Tue Sep 21 2010 Kyle McMartin <kyle@redhat.com> +- Add new btusb ids for MacBookPro from wwoods@. + +* Tue Sep 21 2010 Alexandre Oliva <lxoliva@fsfla.org> - libre +- Deblobbed patch-libre-2.6.36-rc5. + +* Mon Sep 20 2010 Chuck Ebbert <cebbert@redhat.com> - 2.6.36-0.24.rc5 +- Linux 2.6.36-rc5 + +* Sun Sep 19 2010 Chuck Ebbert <cebbert@redhat.com> - 2.6.36-0.23.rc4.git4 +- Linux 2.6.36-rc4-git4 +- Drop alsa-fix-substream-proc-status-read.patch, now merged. + +* Fri Sep 17 2010 Matthew Garrett <mjg@redhat.com> +- linux-2.6-bluetooth-autosuspend.patch + linux-2.6-uvc-autosuspend.patch + linux-2.6-qcserial-autosuspend.patch + linux-2.6-usb-pci-autosuspend.patch - Get some more devices into USB + autosuspend by default, and then put unused USB controllers to sleep + +* Thu Sep 16 2010 Hans de Goede <hdegoede@redhat.com> +- Small fix to virtio_console poll fix from upstream review + +* Wed Sep 15 2010 Hans de Goede <hdegoede@redhat.com> +- virtio_console: Fix poll/select blocking even though there is data to read + +* Wed Sep 15 2010 Alexandre Oliva <lxoliva@fsfla.org> -libre Thu Sep 16 +- Deblobbed patch-libre-2.6.36-rc4. + +* Wed Sep 15 2010 Chuck Ebbert <cebbert@redhat.com> - 2.6.36-0.22.rc4.git2 +- Linux 2.6.36-rc4-git2 +- Fix up add-appleir-usb-driver.patch after HID core changes. + +* Mon Sep 13 2010 Chuck Ebbert <cebbert@redhat.com> - 2.6.36-0.21.rc4.git1 +- Linux 2.6.36-rc4-git1 +- Add preliminary support for Wacom Bamboo pen and touch devices. +- Require python-devel and perl(ExtUtils::Embed) when building perf package (#632942) + +* Sat Sep 11 2010 Chuck Ebbert <cebbert@redhat.com> - 2.6.36-0.20.rc3.git4 +- Linux 2.6.36-rc3-git4 +- Drop revert-drm-i915-enable-rc6-on-ironlake.patch, now merged + +* Fri Sep 10 2010 Bastien Nocera <bnocera@redhat.com> - 2.6.36-0.19.rc3.git1 +- Update AppleIR patch to work, and support the enter key on + newer remotes + +* Wed Sep 08 2010 Kyle McMartin <kyle@redhat.com> +- Enable GPIO_SYSFS. (#631958) + +* Wed Sep 08 2010 Kyle McMartin <kyle@redhat.com> +- Make pci=use_crs a compile-time config option we can switch the default + value of easily. + +* Wed Sep 08 2010 Kyle McMartin <kyle@redhat.com> 2.6.36-0.18.rc3.git1 +- 2.6.36-rc3-git1 +- Set CONFIG_CRYPTO_MANAGER_DISABLE_TESTS for nodebug, and unset for debug. + Which seems like the sensible thing to do given the Kconfig default is y. + +* Tue Sep 07 2010 Dave Jones <davej@redhat.com> +- Disable hung task checker, it only ever causes false positives. (#630777) + +* Tue Sep 07 2010 Kyle McMartin <kyle@redhat.com> 2.6.36-0.17.rc3.git0 +- Revert ce171780 which breaks my graphics on resume. + (drm/i915: Enable RC6 on Ironlake.) + +* Fri Sep 03 2010 Kyle McMartin <kyle@redhat.com> +- Restore AppleIR USB driver which got lost between F-13 and now. + +* Fri Sep 03 2010 Dave Jones <davej@redhat.com> 2.6.36-0.16.rc3.git0 +- exec-randomization: brk away from exec rand area (Kees Cook) + +* Fri Sep 03 2010 Dave Jones <davej@redhat.com> +- Remove the execshield boot parameter. + Based on a patch from Kees Cook + +* Thu Sep 02 2010 Chuck Ebbert <cebbert@redhat.com> - 2.6.36-0.15.rc3.git0 +- Add patch from ALSA mailing list to try to fix bug #628404 +- tpm-fix-stall-on-boot.patch: attempt to fix stalls during boot (#530393) + +* Wed Sep 01 2010 Kyle McMartin <kyle@redhat.com> - 2.6.36-0.14.rc3.git0 +- Fix icebp breakpoints, patch from Frederic Weisbecker. + (https://bugzilla.kernel.org/show_bug.cgi?id=16315#c26) + +* Wed Sep 01 2010 Kyle McMartin <kyle@redhat.com> - 2.6.36-0.13.rc3.git0 +- Swap back to roland's auto-updated utrace patches. + +* Mon Aug 30 2010 Alexandre Oliva <lxoliva@fsfla.org> -libre +- Deblobbed patch-libre-2.6.36-rc3. + +* Mon Aug 30 2010 Kyle McMartin <kyle@redhat.com> - 2.6.36-0.12.rc3.git0 +- Linux 2.6.36-rc3 + +* Sun Aug 29 2010 Chuck Ebbert <cebbert@redhat.com> - 2.6.36-0.11.rc2.git5 +- Linux 2.6.36-rc2-git5 + +* Wed Aug 25 2010 Chuck Ebbert <cebbert@redhat.com> - 2.6.36-0.10.rc2.git4 +- Linux 2.6.36-rc2-git4 + +* Tue Aug 24 2010 Chuck Ebbert <cebbert@redhat.com> - 2.6.36-0.9.rc2.git3 +- Linux 2.6.36-rc2-git3 + +* Mon Aug 23 2010 Roland McGrath <roland@redhat.com> - 2.6.36-0.8.rc2.git0 +- utrace update + +* Sun Aug 22 2010 Chuck Ebbert <cebbert@redhat.com> - 2.6.36-0.7.rc2.git0 +- Linux 2.6.36-rc2 + +* Sun Aug 22 2010 Chuck Ebbert <cebbert@redhat.com> - 2.6.36-0.7.rc1.git4 +- Linux 2.6.36-rc1-git4 +- Fix context in linux-2.6-i386-nx-emulation.patch + +* Sat Aug 21 2010 Chuck Ebbert <cebbert@redhat.com> - 2.6.36-0.6.rc1.git3 +- Drop utrace patch that causes hang on boot. + +* Fri Aug 20 2010 Chuck Ebbert <cebbert@redhat.com> - 2.6.36-0.5.rc1.git3 +- Linux 2.6.36-rc1-git3 +- Drop x86-cpu-fix-regression-in-amd-errata-checking-code.patch, now merged. + +* Thu Aug 19 2010 Kyle McMartin <kmcmartin@redhat.com> - 2.6.36-0.4.rc1.git1 +- Run oldnoconfig on the configs during make prep. +- Make the fix oldnoconfig patch a one liner. + +* Wed Aug 18 2010 Chuck Ebbert <cebbert@redhat.com> - 2.6.36-0.3.rc1.git1 +- Fix hangs on boot with some AMD processors + (x86-cpu-fix-regression-in-amd-errata-checking-code.patch) +- Drop unused ssb_check_for_sprom.patch + +* Wed Aug 18 2010 Dave Jones <davej@redhat.com> +- systemd is dependant upon autofs, so build it in instead of modular. + +* Wed Aug 18 2010 Chuck Ebbert <cebbert@redhat.com> +- Linux 2.6.36-rc1-git1 + +* Wed Aug 18 2010 Kyle McMartin <kmcmartin@redhat.com> - 2.6.36-0.2.rc1.git0 +- Link perf against libnewt for TUI support. + +* Tue Aug 17 2010 Kyle McMartin <kyle@redhat.com> - 2.6.36-0.1.rc1.git0 +- Fix 'oldnoconfig' to do what nonint_loose_oldconfig did. + +* Tue Aug 17 2010 Kyle McMartin <kyle@redhat.com> +- explicitly set KERNEL_GZIP + +* Tue Aug 17 2010 Kyle McMartin <kyle@redhat.com> +- Linux 2.6.36-rc1 + +* Tue Aug 17 2010 Kyle McMartin <kyle@redhat.com> +- Prevent scripts/setlocalversion from mucking with our version + numbers. + +* Tue Aug 17 2010 Alexandre Oliva <lxoliva@fsfla.org> -libre Sat Aug 28 +- Deblobbed 2.6.35-libre2. +- Deblobbed lirc-staging-2.6.36.patch. +- Deblobbed linux-2.6-v4l-dvb-ir-core-update.patch. +- Adjusted drm-nouveau-updates.patch. + +* Wed Aug 04 2010 Kyle McMartin <kyle@redhat.com> +- Disable %%released_kernel. +- This is properly 2.6.36-0.git1, unlike the last commit. Had to make + a mistake sometime, I'm glad it was early. + +* Wed Aug 04 2010 Kyle McMartin <kyle@redhat.com> +- Linux 2.6.35-git1, beginning of rawhide for 2.6.36... + +* Sun Aug 01 2010 Dave Jones <davej@redhat.com> +- Linux 2.6.35 + +* Sun Aug 01 2010 Dave Jones <davej@redhat.com> +- 2.6.35-rc6-git6 + +* Fri Jul 30 2010 Jarod Wilson <jarod@redhat.com> +- lirc staging update +- update kworld patch to one committed upstream +- can't believe how much nicer dist-git is than dist-cvs +- patch memory leaks in mceusb and imon drivers + +* Fri Jul 30 2010 Dave Jones <davej@redhat.com> +- Enable PPS (#619392) + +* Thu Jul 29 2010 Dave Jones <davej@redhat.com> +- 2.6.35-rc6-git5 + +* Mon Jul 27 2010 Kyle McMartin <kyle@redhat.com> +- Patch from linville to only use the country code to set band limits. + (Fixes Apple Airport base stations from limiting you from associating + with other channels.) + +* Fri Jul 23 2010 Chuck Ebbert <cebbert@redhat.com> 2.6.35-0.56.rc6.git1 +- Linux 2.6.35-rc6-git1 + +* Thu Jul 22 2010 Dave Jones <davej@redhat.com> +- 2.6.35-rc6 + +* Thu Jul 22 2010 Ben Skeggsb <bskeggs@redhat.com> +- drm-nouveau-updates: bring back, most patches *weren't* upstream yet, + they're queued for 2.6.36. + +* Wed Jul 21 2010 Chuck Ebbert <cebbert@redhat.com> 2.6.35-0.53.rc5.git7 +- Linux 2.6.35-rc5-git7 + +* Wed Jul 21 2010 Dave Jones <davej@redhat.com> +- Remove the %%verify (no mtime) on kernel-devel's files. + If they got modified, they should fail rpm verify. + +* Wed Jul 21 2010 Dave Jones <davej@redhat.com> +- Linux 2.6.35-rc5-git6 +- Removed drm-nouveau-updates.patch (upstreamed) + +* Mon Jul 19 2010 Chuck Ebbert <cebbert@redhat.com> +- Linux 2.6.35-rc5-git4 + +* Mon Jul 19 2010 Jarod Wilson <jarod@redhat.com> 2.6.35-0.49.rc5.git2 +- Fix from Kyle for input_set_key oops introduced by ir-core patches (#615707) +- Update lirc-staging patches to match what's about to be submitted upstream, + complete with updated copy_from_user overflow check fixages + +* Sun Jul 18 2010 Chuck Ebbert <cebbert@redhat.com> 2.6.35-0.47.rc5.git2 +- Linux 2.6.35-rc5-git2 + +* Sun Jul 18 2010 Chuck Ebbert <cebbert@redhat.com> +- lirc-staging-2.6.36-fixes.patch: Fix up buffer size checking in + lirc code, found by CONFIG_DEBUG_STRICT_USER_COPY_CHECKS + +* Sun Jul 18 2010 Hans de Goede <hdegoede@redhat.com> +- Add support for dynamic menu controls to the uvcvideo driver (#576023) + +* Sun Jul 18 2010 Jarod Wilson <jarod@redhat.com> 2.6.35-0.44.rc5.git1 +- Oops, minor oversight when moving lirc bits into staging resulted + in the modules themselves not getting built. Fix that. + +* Fri Jul 16 2010 Dave Jones <davej@redhat.com> +- Limit some alsa spew that the nuforce udac makes happen a lot. + +* Fri Jul 16 2010 Jarod Wilson <jarod@redhat.com> 2.6.35-0.41.rc5.git1 +- Pull in ir-core update from v4l/dvb staging for 2.6.36, which includes + new in-kernel lirc_dev and ir-core mceusb driver +- Move not-yet-merged/ported lirc bits to drivers/staging/, patch to be + sent upstream for 2.6.36 staging tree RSN + +* Thu Jul 15 2010 Chuck Ebbert <cebbert@redhat.com> 2.6.35-0.40.rc5.git1 +- Replace pci-acpi-disable-aspm-if-no-osc.patch with + updated version from F-13 + +* Thu Jul 15 2010 Chuck Ebbert <cebbert@redhat.com> +- Linux 2.6.35-rc5-git1 + +* Tue Jul 13 2010 Chuck Ebbert <cebbert@redhat.com> +- Linux 2.6.35-rc5 + +* Tue Jul 13 2010 Ben Skeggs <bskeggs@redhat.com> +- nouveau: miscellanous fixes + +* Mon Jul 12 2010 Dave Jones <davej@redhat.com> +- 2.6.35-rc4-git5 + +* Mon Jul 12 2010 Dave Jones <davej@redhat.com> +- Remove a bunch of x86 options from config files that get set + automatically, and can't be overridden. + +* Fri Jul 9 2010 Roland McGrath <roland@redhat.com> +- Split execshield into two patches. + +* Thu Jul 08 2010 Chuck Ebbert <cebbert@redhat.com> 2.6.35-0.31.rc4.git4 +- Linux 2.6.35-rc4-git4 + +* Thu Jul 8 2010 Roland McGrath <roland@redhat.com> +- Remove exec-shield=2 setting, some other cruft from execshield. + +* Wed Jul 7 2010 Roland McGrath <roland@redhat.com> 2.6.35-0.29.rc4.git0.fc14 +- Revamp perf packaging. + +* Wed Jul 07 2010 Chuck Ebbert <cebbert@redhat.com> +- pci-acpi-disable-aspm-if-no-osc.patch, pci-aspm-dont-enable-too-early.patch + PCI layer fixes for problems with hardware that doesn't support ASPM. + +* Wed Jul 07 2010 Ben Skeggs <bskeggs@redhat.com> +- nouveau: bring in nouveau upstream + +* Mon Jul 05 2010 Dave Jones <davej@redhat.com> +- 2.6.35-rc4 + +* Fri Jul 02 2010 Dave Jones <davej@redhat.com> +- 2.6.35-rc3-git7 + dropped: i915-fix-crt-hotplug-regression.patch (upstream) + dropped: drm-i915-fix-edp-panels.patch (upstream) + +* Fri Jul 02 2010 Dave Jones <davej@redhat.com> +- 2.6.35-rc3-git6 + +* Thu Jul 01 2010 Dave Jones <davej@redhat.com> +- Add a patch to debug an infinite loop warning from acpi. + +* Thu Jul 01 2010 Dave Jones <davej@redhat.com> +- 2.6.35-rc3-git5 + +* Thu Jul 01 2010 Chuck Ebbert <cebbert@redhat.com> +- Copy fix for BZ#220892 from F-13. + +* Wed Jun 30 2010 Kyle McMartin <kyle@redhat.com> 2.6.35-0.19.rc3.git4 +- 2.6.35-rc3-git4 + +* Tue Jun 29 2010 Chuck Ebbert <cebbert@redhat.com> +- Disable Intel Moorestown support -- it breaks PC keyboard controllers. + +* Tue Jun 29 2010 Dave Jones <davej@redhat.com> +- Building external modules requires perl. (#608525) + +* Tue Jun 29 2010 Kyle McMartin <kyle@redhat.com> 2.6.35-0.15.rc3.git3 +- 2.6.35-rc3-git3 +- i915-fix-crt-hotplug-regression.patch: attempt to solve the gm45 hotplug + irq storm. + +* Mon Jun 28 2010 Chuck Ebbert <cebbert@redhat.com> +- ppc64: enable active memory sharing and DLPAR memory remove (#607175) + +* Mon Jun 28 2010 Dave Jones <davej@redhat.com> +- 2.6.35-rc3-git2 + +* Mon Jun 28 2010 Dave Jones <davej@redhat.com> +- 2.6.35-rc3-git1 + +* Mon Jun 28 2010 Dave Airlie <airlied@redhat.com> +- drm-i915-fix-edp-panels.patch: update to newer version + +* Fri Jun 25 2010 Kyle McMartin <kyle@redhat.com> +- drm-i915-fix-edp-panels.patch: copy from rawhide. + +* Wed Jun 23 2010 Eric Sandeen <sandeen@redhat.com> +- Fix ext4 freeze deadlock (#607245) + +* Wed Jun 23 2010 Kyle McMartin <kyle@redhat.com> +- Override generic's CONFIG_HZ_1000 on s390. + +* Tue Jun 22 2010 Dave Jones <davej@redhat.com> +- Fix localhost networking. + +* Tue Jun 22 2010 Kyle McMartin <kyle@redhat.com> 2.6.35-0.1.rc3.git0 +- Putting the raw back into rawhide... Yeehaw. +- 2.6.35-rc3 +- Drop a tonne of patches that were merged upstream, or were backports. +- Rebase execshield, utrace. +- Fix up a bunch of rejects, build failures. +- Fix up lirc to build with strict copy_from_user checking. + +* Mon Jun 21 2010 Dave Jones <davej@redhat.com> +- Disable workaround for obscure SMP pentium pro errata. + I miss the 1990s too, but it's time to move on. + If anyone actually needs this it would be better done using + the apply_alternatives infrastructure. + +* Mon Jun 21 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-45 +- drm-revert-drm-fbdev-rework-output-polling-to-be-back-in-core.patch + Revert eb1f8e4f, bisected by Nicolas Kaiser. Thanks! (rhbz#599190) + (If this works, will try to root-cause.) +- rebase previous patch on top of above reversion + +* Mon Jun 21 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-44 +- revert-drm-kms-toggle-poll-around-switcheroo.patch (rhbz#599190) + +* Thu Jun 17 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-43 +- Suck in patch from Dave Miller in 2.6.35 to add async hash testing, + hopefully fixes error from previous commit. (But making it modular + is still a good idea.) + +* Thu Jun 17 2010 Kyle McMartin <kyle@redhat.com> +- make ghash-clmulni modular to get rid of early boot noise (rhbz#586954) + (not a /fix/ but it should at least quiet boot down a bit if you have + the cpu support) + +* Wed Jun 16 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-40 +- Snag some more DRM commits into drm-next.patch that I missed the first + time. +- Fix up radeon_pm toggle to work with the upstream code. + +* Tue Jun 15 2010 Prarit Bhargava <prarit@redhat.com> +- Turn off CONFIG_I2O on x86. + It is broken on 64-bit address spaces (i686/PAE, x86_64), and frankly, I'm + having trouble finding anyone who actually uses it. + +* Tue Jun 15 2010 Alexandre Oliva <lxoliva@fsfla.org> -libre +- Re-enable kernel-libre-firmware. + +* Tue Jun 15 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-38 +- Fix build by nuking superfluous "%%{expand" which was missing a + trailing '}'. You may now reward me with an array of alcoholic + beverages, I so richly deserve for spending roughly a full + day staring at the diff of the spec. + +* Mon Jun 14 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-37 +- btrfs ACL fixes from CVE-2010-2071. + +* Sun Jun 13 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-36 +- remunge and reapply hdpvr-ir-enable + +* Sun Jun 13 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-35 +- mac80211/iwlwifi fix connections to some APs (rhbz#558002) + patches from sgruszka@. + +* Sun Jun 13 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-34 +- Provide a knob to enable radeon_pm to allow users to test + that functionality. Add radeon.pm=1 to your kernel cmdline + in order to enable it. (It still defaults to off though.) + +* Sun Jun 13 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-33 +- Update drm-next to include fixes since 2.6.35-rc1. + +* Fri Jun 11 2010 Justin M. Forbes <jforbes@redhat.com> +- Disable xsave for so that kernel will boot on ancient EC2 hosts. + +* Wed Jun 09 2010 John W. Linville <linville@redhat.com> +- Disable rt20xx and rt35xx chipset support in rt2800 drivers (#570869) + +* Wed Jun 09 2010 David Woodhouse <David.Woodhouse@intel.com> +- Include PHY modules in modules.networking (#602155) + +* Tue Jun 08 2010 Dave Jones <davej@redhat.com> +- Remove useless -kdump kernel support + +* Tue Jun 08 2010 Dave Jones <davej@redhat.com> +- Remove ia64 ata quirk which had no explanation, and still + isn't upstream. No-one cares. + +* Tue Jun 08 2010 Dave Jones <davej@redhat.com> +- Drop linux-2.6-vio-modalias.patch + Two years should have been long enough to get upstream if this is important. + +* Tue Jun 08 2010 Dave Jones <davej@redhat.com> +- Remove crufty Xen remnants from specfile. + +* Tue Jun 08 2010 Dave Jones <davej@redhat.com> +- Remove mkinitrd ifdefs. Dracut or GTFO. + +* Thu Jun 03 2010 Kyle McMartin <kyle@redhat.com> +- Build kernel headers on s390. + +* Wed Jun 02 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-20 +- Disable doc_build_fail because xmlto et al. are crud. + +* Wed Jun 02 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-19 +- Enable -debug flavour builds, until we branch for 2.6.35-rcX. + +* Wed Jun 02 2010 Kyle McMartin <kyle@redhat.com> +- revert writeback fixes for now, there appear to be dragons + lurking there still. + +* Tue Jun 01 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-18 +- fix mismerge in i915_gem.c, drm_gem_object_alloc is now + i915_gem_alloc_object. +- add a hunk to rcu_read{,un}lock in sched_fair too. + +* Tue Jun 01 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-17 +- backport writeback fixes from Jens until stable@ picks them up. + +* Tue Jun 01 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-16 +- quiet-prove_RCU-in-cgroups.patch: shut RCU lockdep up + as in 8b08ca52f5942c21564bbb90ccfb61053f2c26a1. + +* Tue Jun 01 2010 Kyle McMartin <kyle@redhat.com> +- disable radeon_pm for now. + +* Mon May 31 2010 Alexandre Oliva <lxoliva@fsfla.org> -libre +- Adjust iwlwifi-Recover-TX-flow-stall-due-to-stuck-queue.patch. +- Adjust drm-next.patch. + +* Mon May 31 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-14 +- re-add drm-next.patch, should be in sync with 2.6.35 and what + was backported to Fedora 13. +- drop patches merged in drm-next to 2.6.35 +- rebase relevant iwl fixes on top of 2.6.34 from the ones committed + to F-13 by linville. + +* Wed May 26 2010 Adam Jackson <ajax@redhat.com> +- config-generic: Stop building i830.ko + +* Wed May 26 2010 Kyle McMartin <kyle@redhat.com> +- iwlwifi-recover_from_tx_stall.patch: copy from F-13. + +* Fri May 21 2010 Roland McGrath <roland@redhat.com> 2.6.34-11 +- utrace update + +* Fri May 21 2010 Dave Jones <davej@redhat.com> +- Update the SELinux mprotect patch with a newer version from Stephen + +* Fri May 21 2010 Roland McGrath <roland@redhat.com> +- perf requires libdw now, not libdwarf + +* Fri May 21 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-6 +- Fixups for virt_console from Amit Shah, thanks! + +* Thu May 20 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-5 +- disable intel sdvo fixes until dependent code is backported. + +* Thu May 20 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-4 +- resync a lot of stuff with F-13... +- linux-2.6-acpi-video-export-edid.patch: rebase & copy from F-13 +- acpi-ec-add-delay-before-write.patch: copy from F-13 +- ... and a whole lot more that I can't be bothered typing. + +* Mon May 17 2010 Matthew Garrett <mjg@redhat.com> +- thinkpad-acpi-fix-backlight.patch: Fix backlight support on some recent + Thinkpads + +* Mon May 17 2010 Alexandre Oliva <lxoliva@fsfla.org> -libre +- Deblobbed 2.6.34-libre. + +* Sun May 16 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-2 +- Disable strict copy_from_user checking until lirc is fixed. + +* Sun May 16 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-1 +- Linux 2.6.34 + + +### +# The following Emacs magic makes C-c C-e use UTC dates. +# Local Variables: +# rpm-change-log-uses-utc: t +# End: +### |
