From 20878a1017e2bf7eb8c5f870dc6d2641493cb0f9 Mon Sep 17 00:00:00 2001 From: Luca Ceresoli Date: Sun, 17 Apr 2016 23:45:46 +0200 Subject: raspberrypi, raspberrypi2: add a serial console The current Buildroot defconfigs for Raspberry Pi and Raspberry Pi 2 instantiate a console on tty1, which appears on HDMI. Add a console on the serial port (ttyAMA0) to be more consistent with other defconfigs and provide a better out-of-the-box experience to users used to have a serial console from Buildroot defconfigs. This requires three changes: 1. have two 'console=' entries in the kernel command line: tty1, then ttyAMA0; 2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts a getty on the last console= passed to the kernel, ttyAMA0; 3. add a new getty on tty1 to the generated inittab. Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT entirely from the defconfigs, since "console" is the default value. Step 3 requires a post-build script since the Buildroot makefiles can configure only one console. Note: instead of simply adding a new getty on ttyAMA0 (which would work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to instantiate a console on UART, then adds back tty1 via post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment where we instantiate an HDMI console, then instantiate a really-serial console on another line. The result is these two inittab lines: console::respawn:/sbin/getty -L console 0 vt100 # GENERIC_SERIAL tty1::respawn:/sbin/getty -L tty1 0 vt100 # HDMI console Cc: Yann E. MORIN Cc: Arnout Vandecappelle Signed-off-by: Luca Ceresoli Reviewed-by: "Yann E. MORIN" Signed-off-by: Thomas Petazzoni --- configs/raspberrypi_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'configs/raspberrypi_defconfig') diff --git a/configs/raspberrypi_defconfig b/configs/raspberrypi_defconfig index 1795b2c03d..8d13381105 100644 --- a/configs/raspberrypi_defconfig +++ b/configs/raspberrypi_defconfig @@ -2,7 +2,6 @@ BR2_arm=y BR2_arm1176jzf_s=y BR2_ARM_EABIHF=y -BR2_TARGET_GENERIC_GETTY_PORT="tty1" BR2_SYSTEM_DHCP="eth0" # Linux headers same as kernel, a 4.1 series @@ -32,4 +31,5 @@ BR2_PACKAGE_HOST_MTOOLS=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y # BR2_TARGET_ROOTFS_TAR is not set +BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi/post-image.sh" -- cgit v1.2.1